From: Hauke Mehrtens Date: Sat, 11 Jun 2016 15:47:24 +0000 (+0200) Subject: lantiq: use new partition layout for EASY80920NAND X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7f5b8cc3764bec28168a6e90fbf07adac23c6a90;p=openwrt%2Fstaging%2Fluka.git lantiq: use new partition layout for EASY80920NAND This matches the EASY80920NAND boards with UGW. Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/lantiq/dts/EASY80920NAND.dts b/target/linux/lantiq/dts/EASY80920NAND.dts index d7e04eef55..7e1811edc1 100644 --- a/target/linux/lantiq/dts/EASY80920NAND.dts +++ b/target/linux/lantiq/dts/EASY80920NAND.dts @@ -4,6 +4,10 @@ /include/ "EASY80920.dtsi" / { + chosen { + bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1"; + }; + fpi@10000000 { localbus@0 { ranges = <0 0 0x4000000 0x3ffffff>; @@ -22,17 +26,37 @@ partition@0 { label = "uboot"; - reg = <0x00000 0x40000>; + reg = <0x00000 0x100000>; /* 1024 KB */ }; - partition@10000 { + partition@100000 { label = "uboot_env"; - reg = <0x40000 0x40000>; + reg = <0x100000 0x40000>; /* 256 KB */ + }; + + partition@140000 { + label = "ubootconfigB"; + reg = <0x140000 0x40000>; /* 256 KB */ + }; + + partition@180000 { + label = "gphyfirmware"; + reg = <0x180000 0x40000>; /* 256 KB */ + }; + + partition@1c0000 { + label = "ubi"; + reg = <0x1c0000 0xc800000>; + }; + + partition@c9c0000 { + label = "calibration"; + reg = <0xc9c0000 0x100000>; }; - partition@20000 { - label = "firmware"; - reg = <0x80000 0x3f80000>; + partition@cac0000 { + label = "res"; + reg = <0xcac0000 0x13540000>; }; }; };