From: Martin Kennedy Date: Tue, 30 Aug 2022 00:47:24 +0000 (-0400) Subject: mpc85xx: Drop pci aliases to avoid domain changes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7f4b4c29f3489697dca7495216460d0ed5023e02;p=openwrt%2Fstaging%2Fjow.git mpc85xx: Drop pci aliases to avoid domain changes As of upstream Linux commit 0fe1e96fef0a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias"), the PCIe domain address is no longer numbered by the lowest 16 bits of the PCI register address after a fallthrough. Instead of the fallthrough, the enumeration process accepts the alias ID (as determined by `of_alias_scan()`). This causes e.g.: 9000:00:00.0 PCI bridge: Freescale Semiconductor Inc P1020E (rev 11) 9000:01:00.0 Network controller: Qualcomm Atheros AR958x 802.11abgn ... to become 0000:00:00.0 PCI bridge: Freescale Semiconductor Inc P1020E (rev 11) 0000:01:00.0 Network controller: Qualcomm Atheros AR958x 802.11abgn ... ... which then causes the sysfs path of the netdev to change, invalidating the `wifi_device.path`s enumerated in `/etc/config/wireless`. One other solution might be to migrate the uci configuration, as was done for mvebu in commit 0bd5aa89fcf2 ("mvebu: Migrate uci config to new PCIe path"). However, there are concerns that the sysfs path will change once again once some upstream patches[^2][^3] are merged and backported (and `CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT` is enabled). Instead, remove the aliases and allow the fallthrough to continue for now. We will provide a migration in a later release. This was first reported as a Github issue[^1]. [^1]: https://github.com/openwrt/openwrt/issues/10530 [^2]: https://lore.kernel.org/linuxppc-dev/20220706104308.5390-1-pali@kernel.org/t/#u [^3]: https://lore.kernel.org/linuxppc-dev/20220706101043.4867-1-pali@kernel.org/ Fixes: #10530 Tested-by: Martin Kennedy [Tested on the Aerohive HiveAP 330 and Extreme Networks WS-AP3825i] Signed-off-by: Martin Kennedy --- diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts index ccf60eaeed..d6a8da84ef 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts @@ -300,3 +300,16 @@ }; }; /include/ "fsl/p1020si-post.dtsi" + +/* + * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses + * aliases to determine PCI domain numbers, drop aliases so as not to + * change the sysfs path of our wireless netdevs. + */ + +/ { + aliases { + /delete-property/ pci0; + /delete-property/ pci1; + }; +}; diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/panda.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/panda.dts index baaa4a43fd..9be822f7bb 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/panda.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/panda.dts @@ -265,3 +265,17 @@ }; }; /include/ "fsl/p1020si-post.dtsi" + +/* + * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses + * aliases to determine PCI domain numbers, drop aliases so as not to + * change the sysfs path of our wireless netdevs. + */ + +/ { + aliases { + /delete-property/ pci0; + /delete-property/ pci1; + }; +}; + diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/red-15w-rev1.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/red-15w-rev1.dts index 1fd6a4aa49..db35602b94 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/red-15w-rev1.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/red-15w-rev1.dts @@ -214,3 +214,17 @@ }; /include/ "fsl/p1010si-post.dtsi" + +/* + * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses + * aliases to determine PCI domain numbers, drop aliases so as not to + * change the sysfs path of our wireless netdevs. + */ + +/ { + aliases { + /delete-property/ pci0; + /delete-property/ pci1; + }; +}; + diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts index fbe1c0ee70..12281808aa 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts @@ -302,3 +302,16 @@ /delete-node/ crypto@30000; /* Pulled in by p1010si-post */ }; }; + +/* + * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses + * aliases to determine PCI domain numbers, drop aliases so as not to + * change the sysfs path of our wireless netdevs. + */ + +/ { + aliases { + /delete-property/ pci0; + /delete-property/ pci1; + }; +}; diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3710i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3710i.dts index c5588d8027..5d81da4686 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3710i.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3710i.dts @@ -173,3 +173,16 @@ }; /include/ "fsl/p1020si-post.dtsi" + +/* + * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses + * aliases to determine PCI domain numbers, drop aliases so as not to + * change the sysfs path of our wireless netdevs. + */ + +/ { + aliases { + /delete-property/ pci0; + /delete-property/ pci1; + }; +}; diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts index 26f742b222..2ea6718468 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts @@ -253,3 +253,16 @@ }; /include/ "fsl/p1020si-post.dtsi" + +/* + * For the OpenWrt 22.03 release, since Linux 5.10.138 now uses + * aliases to determine PCI domain numbers, drop aliases so as not to + * change the sysfs path of our wireless netdevs. + */ + +/ { + aliases { + /delete-property/ pci0; + /delete-property/ pci1; + }; +};