From: Stefan Kalscheuer Date: Sun, 18 Jun 2023 15:01:00 +0000 (+0200) Subject: mvebu: refresh patches for 6.1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7f257296ec2a71c26e753a8416d08e387b2557bd;p=openwrt%2Fstaging%2Fhauke.git mvebu: refresh patches for 6.1 Remove the following patches: 100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to [1] 101-ARM-dts-turris-omnia-enable-LED-controller-node [2] 702-net-next-ethernet-marvell-mvnetaMQPrioOffload [3] 703-net-next-ethernet-marvell-mvnetaMQPrioFlag [4] 704-net-next-ethernet-marvell-mvnetaMQPrioQueue [5] 705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload [6] 710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi [7] Manually rebased: 902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU All other patches automatically rebased [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=94a29bffdd59498382131fd428fed221f5c96def [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=40624346b7ae0c2b1209fc9993ea30699e512c50 [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=75fa71e3acadbb4ab5eda18505277eb9a1f69b23 [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e7ca75fe6662f78bfeb0112671c812e4c7b8e214 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e9f7099d0730341b24c057acbf545dd019581db6 [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2551dc9e398c37a15e52122d385c29a8b06be45f [7] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cd1e1735aeab49abc679218a79ee764c0d394880 Signed-off-by: Stefan Kalscheuer --- diff --git a/target/linux/mvebu/patches-6.1/100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to.patch b/target/linux/mvebu/patches-6.1/100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to.patch deleted file mode 100644 index 67beb06541..0000000000 --- a/target/linux/mvebu/patches-6.1/100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 81c0004a6433ff90fa6129418802c3c367e453c2 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Mon, 4 Jul 2022 13:36:21 +0200 -Subject: [PATCH 1/5] ARM: dts: turris-omnia: configure LED[0] pin function to - link/activity -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The marvell PHY driver changes the LED[0] pin function to "On - 1000 -Mbps Link, Off - Else". - -Turris Omnia expects that the function is "On - Link, Blink - Activity, -Off - No link". - -Use the `marvell,reg-init` DT property to change the function. - -In the future, once netdev trigger will support HW offloading, we will -be able to have this configured via the combination of PHY driver and -leds-turris-omnia driver. - -Signed-off-by: Marek Behún ---- - arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts -@@ -396,7 +396,8 @@ - phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; -- marvell,reg-init = <3 18 0 0x4985>; -+ marvell,reg-init = <3 18 0 0x4985>, -+ <3 16 0xfff0 0x0001>; - - /* irq is connected to &pcawan pin 7 */ - }; diff --git a/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch b/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch index 975eadb80e..4936f6ad16 100644 --- a/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch +++ b/target/linux/mvebu/patches-6.1/100-aardvark-workaround-PCIe.patch @@ -48,7 +48,7 @@ Cc: stable@vger.kernel.org --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c -@@ -210,6 +210,8 @@ enum { +@@ -212,6 +212,8 @@ enum { }; #define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44) @@ -57,7 +57,7 @@ Cc: stable@vger.kernel.org /* PCIe core controller registers */ #define CTRL_CORE_BASE_ADDR 0x18000 -@@ -558,6 +560,11 @@ static void advk_pcie_setup_hw(struct ad +@@ -560,6 +562,11 @@ static void advk_pcie_setup_hw(struct ad PCIE_CORE_CTRL2_TD_ENABLE; advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG); @@ -69,7 +69,7 @@ Cc: stable@vger.kernel.org /* Set lane X1 */ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); reg &= ~LANE_CNT_MSK; -@@ -1580,6 +1587,9 @@ static irqreturn_t advk_pcie_irq_handler +@@ -1661,6 +1668,9 @@ static irqreturn_t advk_pcie_irq_handler struct advk_pcie *pcie = arg; u32 status; diff --git a/target/linux/mvebu/patches-6.1/101-ARM-dts-turris-omnia-enable-LED-controller-node.patch b/target/linux/mvebu/patches-6.1/101-ARM-dts-turris-omnia-enable-LED-controller-node.patch deleted file mode 100644 index ecfb43553f..0000000000 --- a/target/linux/mvebu/patches-6.1/101-ARM-dts-turris-omnia-enable-LED-controller-node.patch +++ /dev/null @@ -1,48 +0,0 @@ -From fed7cef5e4f2df8c6a79bebf5da1fdd3783ff6f3 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Mon, 4 Jul 2022 13:36:22 +0200 -Subject: [PATCH] ARM: dts: turris-omnia: enable LED controller node -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The LED controller node is disabled because the leds-turris-omnia driver -does not support setting the LED blinking to be controlled by the MCU. - -The patches for that have now been sent [1], so let's enable the node. - -[1] https://lore.kernel.org/linux-leds/20220704105955.15474-1-kabel@kernel.org/T/ - -Signed-off-by: Marek Behún ---- - arch/arm/boot/dts/armada-385-turris-omnia.dts | 7 ++----- - 1 file changed, 2 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts -@@ -194,15 +194,13 @@ - reg = <0x2b>; - #address-cells = <1>; - #size-cells = <0>; -+ status = "okay"; - - /* - * LEDs are controlled by MCU (STM32F0) at - * address 0x2b. - * -- * The driver does not support HW control mode -- * for the LEDs yet. Disable the LEDs for now. -- * -- * Also LED functions are not stable yet: -+ * LED functions are not stable yet: - * - there are 3 LEDs connected via MCU to PCIe - * ports. One of these ports supports mSATA. - * There is no mSATA nor PCIe function. -@@ -213,7 +211,6 @@ - * B. Again there is no such function defined. - * For now we use LED_FUNCTION_INDICATOR - */ -- status = "disabled"; - - multi-led@0 { - reg = <0x0>; diff --git a/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch index 9069de1614..5c3672659c 100644 --- a/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch +++ b/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch @@ -28,7 +28,7 @@ Signed-off-by: Michael Gray --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -1727,6 +1727,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN +@@ -1586,6 +1586,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN The command-line arguments provided by the boot loader will be appended to the the device tree bootargs property. @@ -258,7 +258,7 @@ Signed-off-by: Michael Gray static int kernel_init(void *); extern void init_IRQ(void); -@@ -991,6 +995,18 @@ asmlinkage __visible void __init __no_sa +@@ -992,6 +996,18 @@ asmlinkage __visible void __init __no_sa page_alloc_init(); pr_notice("Kernel command line: %s\n", saved_command_line); diff --git a/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch b/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch index 615caac24f..b75dcf596a 100644 --- a/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch +++ b/target/linux/mvebu/patches-6.1/301-mvebu-armada-38x-enable-libata-leds.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig -@@ -67,6 +67,7 @@ config MACH_ARMADA_38X +@@ -66,6 +66,7 @@ config MACH_ARMADA_38X select HAVE_ARM_TWD if SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X diff --git a/target/linux/mvebu/patches-6.1/302-add_powertables.patch b/target/linux/mvebu/patches-6.1/302-add_powertables.patch index 93ad5de2cc..d0c0dbeb0c 100644 --- a/target/linux/mvebu/patches-6.1/302-add_powertables.patch +++ b/target/linux/mvebu/patches-6.1/302-add_powertables.patch @@ -667,7 +667,7 @@ pinctrl-0 = <&sdhci_pins>; --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -225,12 +225,100 @@ +@@ -223,12 +223,100 @@ pcie@2,0 { /* Port 0, Lane 1 */ status = "okay"; diff --git a/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch index 2057e31c7e..aee033d21f 100644 --- a/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch +++ b/target/linux/mvebu/patches-6.1/306-ARM-mvebu-385-ap-Add-partitions.patch @@ -5,8 +5,8 @@ Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions Signed-off-by: Maxime Ripard --- - arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) + arch/arm/boot/dts/armada-385-db-ap.dts | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts diff --git a/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch b/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch index 16112d53fc..fc6d6239ca 100644 --- a/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch +++ b/target/linux/mvebu/patches-6.1/307-armada-xp-linksys-mamba-broken-idle.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -485,3 +485,7 @@ +@@ -483,3 +483,7 @@ }; }; }; diff --git a/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch b/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch index 4315abc7d2..389e03742e 100644 --- a/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch +++ b/target/linux/mvebu/patches-6.1/308-armada-xp-linksys-mamba-wan.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -387,7 +387,7 @@ +@@ -385,7 +385,7 @@ port@4 { reg = <4>; diff --git a/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch b/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch index e5e83572c9..0ef15f2943 100644 --- a/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch +++ b/target/linux/mvebu/patches-6.1/309-linksys-status-led.patch @@ -39,7 +39,7 @@ chosen { bootargs = "console=ttyS0,115200"; stdout-path = &uart0; -@@ -197,7 +204,7 @@ +@@ -195,7 +202,7 @@ pinctrl-0 = <&power_led_pin>; pinctrl-names = "default"; diff --git a/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch index dd2bef7f63..f52417e83a 100644 --- a/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch +++ b/target/linux/mvebu/patches-6.1/312-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch @@ -5,8 +5,8 @@ Subject: ARM: dts: armada388-clearfog: emmc on clearfog base Signed-off-by: Russell King --- - arch/arm/boot/dts/armada-388-clearfog-base.dts | 1 + - .../dts/armada-38x-solidrun-microsom-emmc.dtsi | 62 ++++++++++++++++++++++ + .../arm/boot/dts/armada-388-clearfog-base.dts | 1 + + .../armada-38x-solidrun-microsom-emmc.dtsi | 62 +++++++++++++++++++ 2 files changed, 63 insertions(+) create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi diff --git a/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch b/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch index f1fddceff4..c333df2784 100644 --- a/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch +++ b/target/linux/mvebu/patches-6.1/315-armada-xp-linksys-mamba-resize-kernel.patch @@ -11,7 +11,7 @@ Signed-off-by: Tad Davanzo --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -456,9 +456,9 @@ +@@ -454,9 +454,9 @@ reg = <0xa00000 0x2800000>; /* 40MB */ }; @@ -23,7 +23,7 @@ Signed-off-by: Tad Davanzo }; /* kernel2 overlaps with rootfs2 by design */ -@@ -467,9 +467,9 @@ +@@ -465,9 +465,9 @@ reg = <0x3200000 0x2800000>; /* 40MB */ }; diff --git a/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch b/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch index 19378870ef..b5ed5ece36 100644 --- a/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch +++ b/target/linux/mvebu/patches-6.1/316-armada-370-dts-fix-crypto-engine.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -234,7 +234,7 @@ +@@ -254,7 +254,7 @@ clocks = <&gateclk 23>; clock-names = "cesa0"; marvell,crypto-srams = <&crypto_sram>; @@ -9,7 +9,7 @@ }; }; -@@ -255,12 +255,17 @@ +@@ -275,12 +275,17 @@ * cpuidle workaround. */ idle-sram@0 { diff --git a/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch index 32e8ef4b7d..307c46e7b8 100644 --- a/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch +++ b/target/linux/mvebu/patches-6.1/700-mvneta-tx-queue-workaround.patch @@ -9,7 +9,7 @@ Signed-off-by: Felix Fietkau --- --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -5006,6 +5006,16 @@ static int mvneta_setup_tc(struct net_de +@@ -5222,6 +5222,16 @@ static int mvneta_setup_tc(struct net_de } } @@ -26,7 +26,7 @@ Signed-off-by: Felix Fietkau static const struct net_device_ops mvneta_netdev_ops = { .ndo_open = mvneta_open, .ndo_stop = mvneta_stop, -@@ -5016,6 +5026,9 @@ static const struct net_device_ops mvnet +@@ -5232,6 +5242,9 @@ static const struct net_device_ops mvnet .ndo_fix_features = mvneta_fix_features, .ndo_get_stats64 = mvneta_get_stats64, .ndo_eth_ioctl = mvneta_ioctl, diff --git a/target/linux/mvebu/patches-6.1/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch b/target/linux/mvebu/patches-6.1/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch deleted file mode 100644 index 019b9528c3..0000000000 --- a/target/linux/mvebu/patches-6.1/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 75fa71e3acadbb4ab5eda18505277eb9a1f69b23 Mon Sep 17 00:00:00 2001 -From: Maxime Chevallier -Date: Fri, 26 Nov 2021 12:20:53 +0100 -Subject: net: mvneta: Use struct tc_mqprio_qopt_offload for MQPrio - configuration - -The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt, -that allows passing extra parameters, such as traffic shaping. This commit -converts the current mqprio code to that new struct. - -Signed-off-by: Maxime Chevallier -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 17 ++++++++++------- - 1 file changed, 10 insertions(+), 7 deletions(-) - -(limited to 'drivers/net/ethernet/marvell/mvneta.c') - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -38,6 +38,7 @@ - #include - #include - #include -+#include - #include - - /* Registers */ -@@ -4966,14 +4967,14 @@ static void mvneta_setup_rx_prio_map(str - } - - static int mvneta_setup_mqprio(struct net_device *dev, -- struct tc_mqprio_qopt *qopt) -+ struct tc_mqprio_qopt_offload *mqprio) - { - struct mvneta_port *pp = netdev_priv(dev); - u8 num_tc; - int i; - -- qopt->hw = TC_MQPRIO_HW_OFFLOAD_TCS; -- num_tc = qopt->num_tc; -+ mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS; -+ num_tc = mqprio->qopt.num_tc; - - if (num_tc > rxq_number) - return -EINVAL; -@@ -4984,13 +4985,15 @@ static int mvneta_setup_mqprio(struct ne - return 0; - } - -- memcpy(pp->prio_tc_map, qopt->prio_tc_map, sizeof(pp->prio_tc_map)); -+ memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map, -+ sizeof(pp->prio_tc_map)); - - mvneta_setup_rx_prio_map(pp); - -- netdev_set_num_tc(dev, qopt->num_tc); -- for (i = 0; i < qopt->num_tc; i++) -- netdev_set_tc_queue(dev, i, qopt->count[i], qopt->offset[i]); -+ netdev_set_num_tc(dev, mqprio->qopt.num_tc); -+ for (i = 0; i < mqprio->qopt.num_tc; i++) -+ netdev_set_tc_queue(dev, i, mqprio->qopt.count[i], -+ mqprio->qopt.offset[i]); - - return 0; - } diff --git a/target/linux/mvebu/patches-6.1/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch b/target/linux/mvebu/patches-6.1/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch deleted file mode 100644 index c878a28843..0000000000 --- a/target/linux/mvebu/patches-6.1/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch +++ /dev/null @@ -1,30 +0,0 @@ -From e7ca75fe6662f78bfeb0112671c812e4c7b8e214 Mon Sep 17 00:00:00 2001 -From: Maxime Chevallier -Date: Fri, 26 Nov 2021 12:20:54 +0100 -Subject: net: mvneta: Don't force-set the offloading flag - -The qopt->hw flag is set by the TC code according to the offloading mode -asked by user. Don't force-set it in the driver, but instead read it to -make sure we do what's asked. - -Signed-off-by: Maxime Chevallier -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -(limited to 'drivers/net/ethernet/marvell/mvneta.c') - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -4973,7 +4973,9 @@ static int mvneta_setup_mqprio(struct ne - u8 num_tc; - int i; - -- mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS; -+ if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS) -+ return 0; -+ - num_tc = mqprio->qopt.num_tc; - - if (num_tc > rxq_number) diff --git a/target/linux/mvebu/patches-6.1/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch b/target/linux/mvebu/patches-6.1/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch deleted file mode 100644 index 546a8486ef..0000000000 --- a/target/linux/mvebu/patches-6.1/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch +++ /dev/null @@ -1,97 +0,0 @@ -From e9f7099d0730341b24c057acbf545dd019581db6 Mon Sep 17 00:00:00 2001 -From: Maxime Chevallier -Date: Fri, 26 Nov 2021 12:20:55 +0100 -Subject: net: mvneta: Allow having more than one queue per TC - -The current mqprio implementation assumed that we are only using one -queue per TC. Use the offset and count parameters to allow using -multiple queues per TC. In that case, the controller will use a standard -round-robin algorithm to pick queues assigned to the same TC, with the -same priority. - -This only applies to VLAN priorities in ingress traffic, each TC -corresponding to a vlan priority. - -Signed-off-by: Maxime Chevallier -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 35 ++++++++++++++++++++--------------- - 1 file changed, 20 insertions(+), 15 deletions(-) - -(limited to 'drivers/net/ethernet/marvell/mvneta.c') - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -498,7 +498,6 @@ struct mvneta_port { - u8 mcast_count[256]; - u16 tx_ring_size; - u16 rx_ring_size; -- u8 prio_tc_map[8]; - - phy_interface_t phy_interface; - struct device_node *dn; -@@ -4955,13 +4954,12 @@ static void mvneta_clear_rx_prio_map(str - mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, 0); - } - --static void mvneta_setup_rx_prio_map(struct mvneta_port *pp) -+static void mvneta_map_vlan_prio_to_rxq(struct mvneta_port *pp, u8 pri, u8 rxq) - { -- u32 val = 0; -- int i; -+ u32 val = mvreg_read(pp, MVNETA_VLAN_PRIO_TO_RXQ); - -- for (i = 0; i < rxq_number; i++) -- val |= MVNETA_VLAN_PRIO_RXQ_MAP(i, pp->prio_tc_map[i]); -+ val &= ~MVNETA_VLAN_PRIO_RXQ_MAP(pri, 0x7); -+ val |= MVNETA_VLAN_PRIO_RXQ_MAP(pri, rxq); - - mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val); - } -@@ -4970,8 +4968,8 @@ static int mvneta_setup_mqprio(struct ne - struct tc_mqprio_qopt_offload *mqprio) - { - struct mvneta_port *pp = netdev_priv(dev); -+ int rxq, tc; - u8 num_tc; -- int i; - - if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS) - return 0; -@@ -4981,21 +4979,28 @@ static int mvneta_setup_mqprio(struct ne - if (num_tc > rxq_number) - return -EINVAL; - -+ mvneta_clear_rx_prio_map(pp); -+ - if (!num_tc) { -- mvneta_clear_rx_prio_map(pp); - netdev_reset_tc(dev); - return 0; - } - -- memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map, -- sizeof(pp->prio_tc_map)); -+ netdev_set_num_tc(dev, mqprio->qopt.num_tc); - -- mvneta_setup_rx_prio_map(pp); -+ for (tc = 0; tc < mqprio->qopt.num_tc; tc++) { -+ netdev_set_tc_queue(dev, tc, mqprio->qopt.count[tc], -+ mqprio->qopt.offset[tc]); -+ -+ for (rxq = mqprio->qopt.offset[tc]; -+ rxq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc]; -+ rxq++) { -+ if (rxq >= rxq_number) -+ return -EINVAL; - -- netdev_set_num_tc(dev, mqprio->qopt.num_tc); -- for (i = 0; i < mqprio->qopt.num_tc; i++) -- netdev_set_tc_queue(dev, i, mqprio->qopt.count[i], -- mqprio->qopt.offset[i]); -+ mvneta_map_vlan_prio_to_rxq(pp, tc, rxq); -+ } -+ } - - return 0; - } diff --git a/target/linux/mvebu/patches-6.1/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch b/target/linux/mvebu/patches-6.1/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch deleted file mode 100644 index 1d4a055a71..0000000000 --- a/target/linux/mvebu/patches-6.1/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch +++ /dev/null @@ -1,182 +0,0 @@ -From 2551dc9e398c37a15e52122d385c29a8b06be45f Mon Sep 17 00:00:00 2001 -From: Maxime Chevallier -Date: Fri, 26 Nov 2021 12:20:56 +0100 -Subject: net: mvneta: Add TC traffic shaping offload - -The mvneta controller is able to do some tocken-bucket per-queue traffic -shaping. This commit adds support for setting these using the TC mqprio -interface. - -The token-bucket parameters are customisable, but the current -implementation configures them to have a 10kbps resolution for the -rate limitation, since it allows to cover the whole range of max_rate -values from 10kbps to 5Gbps with 10kbps increments. - -Signed-off-by: Maxime Chevallier -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 120 +++++++++++++++++++++++++++++++++- - 1 file changed, 119 insertions(+), 1 deletion(-) - -(limited to 'drivers/net/ethernet/marvell/mvneta.c') - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -248,12 +248,39 @@ - #define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000 - #define MVNETA_PORT_TX_RESET 0x3cf0 - #define MVNETA_PORT_TX_DMA_RESET BIT(0) -+#define MVNETA_TXQ_CMD1_REG 0x3e00 -+#define MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 BIT(3) -+#define MVNETA_TXQ_CMD1_BW_LIM_EN BIT(0) -+#define MVNETA_REFILL_NUM_CLK_REG 0x3e08 -+#define MVNETA_REFILL_MAX_NUM_CLK 0x0000ffff - #define MVNETA_TX_MTU 0x3e0c - #define MVNETA_TX_TOKEN_SIZE 0x3e14 - #define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff -+#define MVNETA_TXQ_BUCKET_REFILL_REG(q) (0x3e20 + ((q) << 2)) -+#define MVNETA_TXQ_BUCKET_REFILL_PERIOD_MASK 0x3ff00000 -+#define MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT 20 -+#define MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX 0x0007ffff - #define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2)) - #define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff - -+/* The values of the bucket refill base period and refill period are taken from -+ * the reference manual, and adds up to a base resolution of 10Kbps. This allows -+ * to cover all rate-limit values from 10Kbps up to 5Gbps -+ */ -+ -+/* Base period for the rate limit algorithm */ -+#define MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS 100 -+ -+/* Number of Base Period to wait between each bucket refill */ -+#define MVNETA_TXQ_BUCKET_REFILL_PERIOD 1000 -+ -+/* The base resolution for rate limiting, in bps. Any max_rate value should be -+ * a multiple of that value. -+ */ -+#define MVNETA_TXQ_RATE_LIMIT_RESOLUTION (NSEC_PER_SEC / \ -+ (MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS * \ -+ MVNETA_TXQ_BUCKET_REFILL_PERIOD)) -+ - #define MVNETA_LPI_CTRL_0 0x2cc0 - #define MVNETA_LPI_CTRL_1 0x2cc4 - #define MVNETA_LPI_REQUEST_ENABLE BIT(0) -@@ -4964,11 +4991,74 @@ static void mvneta_map_vlan_prio_to_rxq( - mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val); - } - -+static int mvneta_enable_per_queue_rate_limit(struct mvneta_port *pp) -+{ -+ unsigned long core_clk_rate; -+ u32 refill_cycles; -+ u32 val; -+ -+ core_clk_rate = clk_get_rate(pp->clk); -+ if (!core_clk_rate) -+ return -EINVAL; -+ -+ refill_cycles = MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS / -+ (NSEC_PER_SEC / core_clk_rate); -+ -+ if (refill_cycles > MVNETA_REFILL_MAX_NUM_CLK) -+ return -EINVAL; -+ -+ /* Enable bw limit algorithm version 3 */ -+ val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG); -+ val &= ~(MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN); -+ mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val); -+ -+ /* Set the base refill rate */ -+ mvreg_write(pp, MVNETA_REFILL_NUM_CLK_REG, refill_cycles); -+ -+ return 0; -+} -+ -+static void mvneta_disable_per_queue_rate_limit(struct mvneta_port *pp) -+{ -+ u32 val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG); -+ -+ val |= (MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN); -+ mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val); -+} -+ -+static int mvneta_setup_queue_rates(struct mvneta_port *pp, int queue, -+ u64 min_rate, u64 max_rate) -+{ -+ u32 refill_val, rem; -+ u32 val = 0; -+ -+ /* Convert to from Bps to bps */ -+ max_rate *= 8; -+ -+ if (min_rate) -+ return -EINVAL; -+ -+ refill_val = div_u64_rem(max_rate, MVNETA_TXQ_RATE_LIMIT_RESOLUTION, -+ &rem); -+ -+ if (rem || !refill_val || -+ refill_val > MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX) -+ return -EINVAL; -+ -+ val = refill_val; -+ val |= (MVNETA_TXQ_BUCKET_REFILL_PERIOD << -+ MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT); -+ -+ mvreg_write(pp, MVNETA_TXQ_BUCKET_REFILL_REG(queue), val); -+ -+ return 0; -+} -+ - static int mvneta_setup_mqprio(struct net_device *dev, - struct tc_mqprio_qopt_offload *mqprio) - { - struct mvneta_port *pp = netdev_priv(dev); -- int rxq, tc; -+ int rxq, txq, tc, ret; - u8 num_tc; - - if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS) -@@ -4982,6 +5072,7 @@ static int mvneta_setup_mqprio(struct ne - mvneta_clear_rx_prio_map(pp); - - if (!num_tc) { -+ mvneta_disable_per_queue_rate_limit(pp); - netdev_reset_tc(dev); - return 0; - } -@@ -5002,6 +5093,33 @@ static int mvneta_setup_mqprio(struct ne - } - } - -+ if (mqprio->shaper != TC_MQPRIO_SHAPER_BW_RATE) { -+ mvneta_disable_per_queue_rate_limit(pp); -+ return 0; -+ } -+ -+ if (mqprio->qopt.num_tc > txq_number) -+ return -EINVAL; -+ -+ ret = mvneta_enable_per_queue_rate_limit(pp); -+ if (ret) -+ return ret; -+ -+ for (tc = 0; tc < mqprio->qopt.num_tc; tc++) { -+ for (txq = mqprio->qopt.offset[tc]; -+ txq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc]; -+ txq++) { -+ if (txq >= txq_number) -+ return -EINVAL; -+ -+ ret = mvneta_setup_queue_rates(pp, txq, -+ mqprio->min_rate[tc], -+ mqprio->max_rate[tc]); -+ if (ret) -+ return ret; -+ } -+ } -+ - return 0; - } - diff --git a/target/linux/mvebu/patches-6.1/710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi.patch b/target/linux/mvebu/patches-6.1/710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi.patch deleted file mode 100644 index a852dc1fc1..0000000000 --- a/target/linux/mvebu/patches-6.1/710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi.patch +++ /dev/null @@ -1,50 +0,0 @@ -From b01d622d76134e9401970ffd3fbbb9a7051f976a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Pali=20Roh=C3=A1r?= -Date: Tue, 20 Sep 2022 14:11:54 +0200 -Subject: [PATCH] phy: marvell: phy-mvebu-a3700-comphy: Reset COMPHY registers - before USB 3.0 power on -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Turris MOX board with older ARM Trusted Firmware version v1.5 is not able -to detect any USB 3.0 device connected to USB-A port on Mox-A module after -commit 0a6fc70d76bd ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken -reset support"). On the other hand USB 2.0 devices connected to the same -USB-A port are working fine. - -It looks as if the older firmware configures COMPHY registers for USB 3.0 -somehow incompatibly for kernel driver. Experiments show that resetting -COMPHY registers via setting SFT_RST auto-clearing bit in COMPHY_SFT_RESET -register fixes this issue. - -Reset the COMPHY in mvebu_a3700_comphy_usb3_power_on() function as a first -step after selecting COMPHY lane and USB 3.0 function. With this change -Turris MOX board can successfully detect USB 3.0 devices again. - -Before the above mentioned commit this reset was implemented in PHY reset -method, so this is the reason why there was no issue with older firmware -version then. - -Fixes: 0a6fc70d76bd ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support") -Reported-by: Marek Behún -Signed-off-by: Pali Rohár -Tested-by: Shin'ichiro Kawasaki -Link: https://lore.kernel.org/r/20220920121154.30115-1-pali@kernel.org -Signed-off-by: Vinod Koul ---- - drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c -+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c -@@ -826,6 +826,9 @@ mvebu_a3700_comphy_usb3_power_on(struct - if (ret) - return ret; - -+ /* COMPHY register reset (cleared automatically) */ -+ comphy_lane_reg_set(lane, COMPHY_SFT_RESET, SFT_RST, SFT_RST); -+ - /* - * 0. Set PHY OTG Control(0x5d034), bit 4, Power up OTG module The - * register belong to UTMI module, so it is set in UTMI phy driver. diff --git a/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch index dba1253699..d2995b375c 100644 --- a/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch +++ b/target/linux/mvebu/patches-6.1/801-pci-mvebu-time-out-reset-on-link-up.patch @@ -13,7 +13,7 @@ Signed-off-by: Russell King --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c -@@ -1023,6 +1023,7 @@ static int mvebu_pcie_powerup(struct mve +@@ -1414,6 +1414,7 @@ static int mvebu_pcie_powerup(struct mve if (port->reset_gpio) { u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; @@ -21,7 +21,7 @@ Signed-off-by: Russell King of_property_read_u32(port->dn, "reset-delay-us", &reset_udelay); -@@ -1030,7 +1031,13 @@ static int mvebu_pcie_powerup(struct mve +@@ -1421,7 +1422,13 @@ static int mvebu_pcie_powerup(struct mve udelay(100); gpiod_set_value_cansleep(port->reset_gpio, 0); @@ -36,7 +36,7 @@ Signed-off-by: Russell King } return 0; -@@ -1190,15 +1197,16 @@ static int mvebu_pcie_probe(struct platf +@@ -1538,15 +1545,16 @@ static int mvebu_pcie_probe(struct platf if (!child) continue; diff --git a/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch b/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch index 3446086cad..fc5c804582 100644 --- a/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch +++ b/target/linux/mvebu/patches-6.1/901-dt-bindings-Add-IEI-vendor-prefix-and-IEI-WT61P803-P.patch @@ -207,7 +207,7 @@ Cc: Robert Marko + }; --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml -@@ -519,6 +519,8 @@ patternProperties: +@@ -579,6 +579,8 @@ patternProperties: description: IC Plus Corp. "^idt,.*": description: Integrated Device Technologies, Inc. diff --git a/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch b/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch index 0e546b426e..d213404250 100644 --- a/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch +++ b/target/linux/mvebu/patches-6.1/902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU.patch @@ -16,17 +16,17 @@ Signed-off-by: Pavo Banicevic Cc: Luka Perkov Cc: Robert Marko --- - drivers/mfd/Kconfig | 8 + + drivers/mfd/Kconfig | 9 + drivers/mfd/Makefile | 1 + drivers/mfd/iei-wt61p803-puzzle.c | 908 ++++++++++++++++++++++++ include/linux/mfd/iei-wt61p803-puzzle.h | 66 ++ - 4 files changed, 983 insertions(+) + 4 files changed, 984 insertions(+) create mode 100644 drivers/mfd/iei-wt61p803-puzzle.c create mode 100644 include/linux/mfd/iei-wt61p803-puzzle.h --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig -@@ -2189,6 +2189,15 @@ config SGI_MFD_IOC3 +@@ -2221,6 +2221,15 @@ config SGI_MFD_IOC3 If you have an SGI Origin, Octane, or a PCI IOC3 card, then say Y. Otherwise say N. @@ -44,14 +44,14 @@ Cc: Robert Marko depends on SPI_MASTER --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile -@@ -237,6 +237,7 @@ obj-$(CONFIG_MFD_DLN2) += dln2.o - obj-$(CONFIG_MFD_RT4831) += rt4831.o +@@ -244,6 +244,7 @@ obj-$(CONFIG_MFD_RT4831) += rt4831.o obj-$(CONFIG_MFD_RT5033) += rt5033.o + obj-$(CONFIG_MFD_RT5120) += rt5120.o obj-$(CONFIG_MFD_SKY81452) += sky81452.o -+obj-$(CONFIG_MFD_IEI_WT61P803_PUZZLE) += iei-wt61p803-puzzle.o ++obj-$(CONFIG_MFD_IEI_WT61P803_PUZZLE) += iei-wt61p803-puzzle.o - intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o - obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o + obj-$(CONFIG_INTEL_SOC_PMIC) += intel_soc_pmic_crc.o + obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o --- /dev/null +++ b/drivers/mfd/iei-wt61p803-puzzle.c @@ -0,0 +1,908 @@ diff --git a/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch b/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch index 023495373b..a11b387d92 100644 --- a/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch +++ b/target/linux/mvebu/patches-6.1/903-drivers-hwmon-Add-the-IEI-WT61P803-PUZZLE-HWMON-driv.patch @@ -20,13 +20,13 @@ Cc: Robert Marko --- drivers/hwmon/Kconfig | 8 + drivers/hwmon/Makefile | 1 + - drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 413 ++++++++++++++++++++++ - 3 files changed, 422 insertions(+) + drivers/hwmon/iei-wt61p803-puzzle-hwmon.c | 445 ++++++++++++++++++++++ + 3 files changed, 454 insertions(+) create mode 100644 drivers/hwmon/iei-wt61p803-puzzle-hwmon.c --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig -@@ -732,6 +732,14 @@ config SENSORS_IBMPOWERNV +@@ -755,6 +755,14 @@ config SENSORS_IBMPOWERNV This driver can also be built as a module. If so, the module will be called ibmpowernv. @@ -43,7 +43,7 @@ Cc: Robert Marko depends on IIO --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile -@@ -84,6 +84,7 @@ obj-$(CONFIG_SENSORS_HIH6130) += hih6130 +@@ -87,6 +87,7 @@ obj-$(CONFIG_SENSORS_HIH6130) += hih6130 obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o diff --git a/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch b/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch index a3fc731c47..ec783256e3 100644 --- a/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch +++ b/target/linux/mvebu/patches-6.1/904-drivers-leds-Add-the-IEI-WT61P803-PUZZLE-LED-driver.patch @@ -30,7 +30,7 @@ Cc: Robert Marko --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -306,6 +306,14 @@ config LEDS_IPAQ_MICRO +@@ -299,6 +299,14 @@ config LEDS_IPAQ_MICRO Choose this option if you want to use the notification LED on Compaq/HP iPAQ h3100 and h3600. @@ -47,7 +47,7 @@ Cc: Robert Marko depends on LEDS_CLASS --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -33,6 +33,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx. +@@ -32,6 +32,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx. obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o obj-$(CONFIG_LEDS_IP30) += leds-ip30.o obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o diff --git a/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch b/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch index 9015436f6a..0f1a6f306b 100644 --- a/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch +++ b/target/linux/mvebu/patches-6.1/906-Documentation-hwmon-Add-iei-wt61p803-puzzle-hwmon-dr.patch @@ -64,11 +64,11 @@ Cc: Robert Marko +================= == ===================================================== --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst -@@ -74,6 +74,7 @@ Hardware Monitoring Kernel Drivers +@@ -77,6 +77,7 @@ Hardware Monitoring Kernel Drivers ibmaem ibm-cffps ibmpowernv + iei-wt61p803-puzzle-hwmon ina209 ina2xx - ina3221 + ina238 diff --git a/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch b/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch index b8accf180b..e72df378ef 100644 --- a/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch +++ b/target/linux/mvebu/patches-6.1/907-MAINTAINERS-Add-an-entry-for-the-IEI-WT61P803-PUZZLE.patch @@ -16,7 +16,7 @@ Cc: Robert Marko --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -9063,6 +9063,22 @@ F: include/net/nl802154.h +@@ -9900,6 +9900,22 @@ F: include/net/nl802154.h F: net/ieee802154/ F: net/mac802154/