From: Adrian Schmutzler Date: Thu, 9 Jul 2020 10:49:17 +0000 (+0200) Subject: ath79: add support for TP-Link TL-WPA8630 v1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7ef7dbaf7057da37afeefa3753bc4d0f0453e51f;p=openwrt%2Fstaging%2Fansuel.git ath79: add support for TP-Link TL-WPA8630 v1 This ports the TP-Link TL-WPA8630 v1 from ar71xx to ath79. Specifications: SoC: QCA9563 CPU: 750 MHz Flash/RAM: 8 / 128 MiB Ethernet: 3x 1G ports (QCA8337 switch) WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac (ath10k) Buttons, LEDs and network setup appear to be almost identical to the v2 revision. Powerline interface is connected to switch port 5 (Label LAN4). Installation: No "fresh" device was available for testing the factory image. It is not known whether flashing via OEM firmware GUI is possible or not. A discussion from 2018 [1] about that indicates a few adjustments are necessary, but it is not clear whether those are already implemented with the TPLINK_HEADER_VERSION = 2 or not. Note that for the TL-WPA8630P v1, the TPLINK_HWID needs to be changed to 0x86310001 to allow factory flashing. [1] https://forum.openwrt.org/t/solved-tl-wpa8630p-lede-does-not-install/8161/27 Recovery: Recovery is only possible via serial. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630-v1.dts b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630-v1.dts new file mode 100644 index 0000000000..8912e2fc7c --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630-v1.dts @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9563_tplink_tl-wpa8630.dtsi" + +/ { + compatible = "tplink,tl-wpa8630-v1", "qca,qca9563"; + model = "TP-Link TL-WPA8630 v1"; + + aliases { + label-mac-device = ð0; + }; +}; + +&keys { + wifi { + label = "WiFi button"; + linux,code = ; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; +}; + +&partitions { + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x010000>; + read-only; + }; + + partition@10000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x010000 0x7d0000>; + }; + + partition@7e0000 { + label = "mib0"; + reg = <0x7e0000 0x010000>; + read-only; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; +}; + +ð0 { + mtd-mac-address = <&uboot 0x0fc00>; +}; + +&wmac { + mtd-mac-address = <&uboot 0x0fc00>; +}; diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630.dtsi new file mode 100644 index 0000000000..68b455c66a --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630.dtsi @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include + +#include "qca956x.dtsi" + +/ { + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys: keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + leds { + label = "LED control button"; + linux,code = ; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + pair { + label = "Pair button"; + linux,code = ; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "tp-link:green:power"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "tp-link:green:lan"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + + wifi2g { + label = "tp-link:green:wifi2g"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wifi5g { + label = "tp-link:green:wifi5g"; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "sgmii"; + qca,mib-poll-interval = <500>; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x7c 0x0000007e /* PORT0_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&phy0>; + phy-mode = "sgmii"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi index 16c055b6d7..97eeb45d65 100644 --- a/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi +++ b/target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.dtsi @@ -1,45 +1,12 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include -#include - -#include "qca956x.dtsi" +#include "qca9563_tplink_tl-wpa8630.dtsi" / { aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; label-mac-device = ð0; }; - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "tp-link:green:power"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - }; - - wifi2g { - label = "tp-link:green:wifi2g"; - gpios = <&gpio 19 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - wifi5g { - label = "tp-link:green:wifi5g"; - gpios = <&gpio 21 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - lan { - label = "tp-link:green:lan"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - }; - gpio-export { compatible = "gpio-export"; @@ -48,118 +15,47 @@ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; }; }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "Reset button"; - linux,code = ; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - pair { - label = "Pair button"; - linux,code = ; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - leds { - label = "LED control button"; - linux,code = ; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - - wps { - label = "WPS button"; - linux,code = ; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - }; - }; }; -&spi { - status = "okay"; - - num-cs = <1>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <25000000>; - - partitions: partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "factory-uboot"; - reg = <0x000000 0x020000>; - read-only; - }; - - partition@20000 { - label = "u-boot"; - reg = <0x020000 0x020000>; - read-only; - }; - - partition@40000 { - compatible = "tplink,firmware"; - label = "firmware"; - reg = <0x040000 0x5e0000>; - }; - - partition@620000 { - label = "partition-table"; - reg = <0x620000 0x010000>; - read-only; - }; - }; +&keys { + wps { + label = "WPS button"; + linux,code = ; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; }; }; -&pcie { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - -&mdio0 { - status = "okay"; +&partitions { + partition@0 { + label = "factory-uboot"; + reg = <0x000000 0x020000>; + read-only; + }; - phy-mask = <0>; + partition@20000 { + label = "u-boot"; + reg = <0x020000 0x020000>; + read-only; + }; - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "sgmii"; - qca,mib-poll-interval = <500>; + partition@40000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x040000 0x5e0000>; + }; - qca,ar8327-initvals = < - 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ - 0x7c 0x0000007e /* PORT0_STATUS */ - >; + partition@620000 { + label = "partition-table"; + reg = <0x620000 0x010000>; + read-only; }; }; ð0 { - status = "okay"; - - phy-handle = <&phy0>; - phy-mode = "sgmii"; mtd-mac-address = <&mac 0x8>; }; &wmac { - status = "okay"; - - mtd-cal-data = <&art 0x1000>; mtd-mac-address = <&mac 0x8>; }; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 4f1b76a65a..32101ed5b0 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -297,6 +297,7 @@ tplink,tl-mr6400-v1) ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1" ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0" ;; +tplink,tl-wpa8630-v1|\ tplink,tl-wpa8630p-v2-eu|\ tplink,tl-wpa8630p-v2-int) ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3c" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 01b083ddad..4195332ae2 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -294,6 +294,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan:1" "2:lan:3" "3:lan:2" ;; + tplink,tl-wpa8630-v1|\ tplink,tl-wpa8630p-v2-eu|\ tplink,tl-wpa8630p-v2-int) # port 5 (internal) is the power-line port diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 37f1792fad..19e20c7d36 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -129,6 +129,10 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) ;; + tplink,tl-wpa8630-v1) + caldata_extract "art" 0x5000 0x844 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) +1) + ;; tplink,tl-wr902ac-v1) caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary tplink 0x8) -1) diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration index 0f68209c9b..2dcdf7b007 100644 --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration @@ -45,6 +45,10 @@ tplink,re355-v1) tplink,re450-v1) migrate_leds "re450:=tp-link:" ;; +tplink,tl-wpa8630-v1) + migrate_leds "^tl-wpa8630:=tp-link:" \ + ':wlan$=:wifi2g' ':wlan5$=:wifi5g' + ;; wd,mynet-n750) migrate_leds "wd:=mynet-n750:" ;; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index c2cda6b3df..fdc94b738a 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -500,6 +500,17 @@ define Device/tplink_tl-wdr4900-v2 endef TARGET_DEVICES += tplink_tl-wdr4900-v2 +define Device/tplink_tl-wpa8630-v1 + $(Device/tplink-8mlzma) + SOC := qca9563 + DEVICE_MODEL := TL-WPA8630 + DEVICE_VARIANT := v1 + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct + TPLINK_HWID := 0x86300001 + SUPPORTED_DEVICES += tl-wpa8630 +endef +TARGET_DEVICES += tplink_tl-wpa8630-v1 + define Device/tplink_tl-wpa8630p-v2 $(Device/tplink-safeloader) SOC := qca9563