From: Jaylin Yu <jaylin.yu@open-mesh.com>
Date: Fri, 11 Nov 2016 15:12:36 +0000 (+0100)
Subject: ar71xx: Add usable, inactive LEDs on OpenMesh devices
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7ee6ab1a317d463ce563b1505f3dc986655fda28;p=openwrt%2Fstaging%2Fnoltari.git

ar71xx: Add usable, inactive LEDs on OpenMesh devices

OpenMesh devices have often LEDs which are not yet used by OpenWrt. These
should still be available as disabled LEDs in the system configuration for
easier modification.

Signed-off-by: Jaylin Yu <jaylin.yu@open-mesh.com>
[sven.eckelmann@open-mesh.com: Remove LEDs already specified via diag.sh,
 add wifi/status LEDs]
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
---

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 16135a36a6..2a1138c443 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -289,18 +289,31 @@ mr18)
 	;;
 mr600)
 	ucidef_set_led_wlan "wlan58" "WLAN58" "$board:green:wlan58" "phy0tpt"
+	ucidef_set_led_default "wps" "WPS" "mr600:blue:wps" "0"
+	;;
+mr600v2)
+	ucidef_set_led_default "wlan24-red" "WLAN 2.4GHz (red)" "mr600:red:wlan24" "0"
+	ucidef_set_led_default "wlan24-yellow" "WLAN 2.4GHz (yellow)" "mr600:yellow:wlan24" "0"
+	ucidef_set_led_wlan "wlan24-green" "WLAN 4GHz (green)" "mr600:green:wlan24" "phy1tpt"
+	ucidef_set_led_default "wlan5-red" "WLAN 5GHz (red)" "mr600:red:wlan58" "0"
+	ucidef_set_led_default "wlan5-yellow" "WLAN 5GHz (yellow)" "mr600:yellow:wlan58" "0"
+	ucidef_set_led_wlan "wlan5-green" "WLAN 5GHz (green)" "mr600:green:wlan58" "phy0tpt"
 	;;
 mr1750|\
 mr1750v2)
 	ucidef_set_led_netdev "lan" "LAN" "mr1750:blue:wan" "eth0"
 	ucidef_set_led_wlan "wlan58" "WLAN58" "mr1750:blue:wlan58" "phy0tpt"
 	ucidef_set_led_wlan "wlan24" "WLAN24" "mr1750:blue:wlan24" "phy1tpt"
+	ucidef_set_led_default "status-red" "Status (red)" "mr1750:red:wifi" "0"
+	ucidef_set_led_default "status-green" "Status (green)" "mr1750:green:wifi" "0"
 	;;
 mr900|\
 mr900v2)
 	ucidef_set_led_netdev "lan" "LAN" "mr900:blue:wan" "eth0"
 	ucidef_set_led_wlan "wlan24" "WLAN24" "mr900:blue:wlan24" "phy0tpt"
 	ucidef_set_led_wlan "wlan58" "WLAN58" "mr900:blue:wlan58" "phy1tpt"
+	ucidef_set_led_default "status-red" "Status (red)" "mr900:red:wifi" "0"
+	ucidef_set_led_default "status-green" "Status (green)" "mr900:green:wifi" "0"
 	;;
 mynet-n600)
 	ucidef_set_led_netdev "wan" "WAN" "wd:blue:internet" "eth1"
@@ -347,15 +360,29 @@ om2p-hsv3|\
 om2p-lc)
 	ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
 	ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1"
+	ucidef_set_led_default "wlan-red" "WLAN (red)" "om2p:red:wifi" "0"
+	ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om2p:yellow:wifi" "0"
+	ucidef_set_led_default "wlan-green" "WLAN (green)" "om2p:green:wifi" "0"
 	;;
 om5p|\
 om5p-an)
 	ucidef_set_led_netdev "port1" "port1" "om5p:blue:wan" "eth0"
 	ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1"
+	ucidef_set_led_default "wlan-red" "WLAN (red)" "om5p:red:wifi" "0"
+	ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5p:yellow:wifi" "0"
+	ucidef_set_led_default "wlan-green" "WLAN (green)" "om5p:green:wifi" "0"
 	;;
 om5p-ac)
 	ucidef_set_led_netdev "port1" "port1" "om5pac:blue:lan" "eth0"
 	ucidef_set_led_netdev "port2" "port2" "om5pac:blue:wan" "eth1"
+	ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0"
+	ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0"
+	ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0"
+	;;
+om5p-acv2)
+	ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0"
+	ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0"
+	ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0"
 	;;
 omy-g1)
 	ucidef_set_led_wlan "wlan" "WLAN" "omy:green:wlan" "phy0tpt"