From: David Bauer Date: Fri, 9 Jun 2023 11:39:52 +0000 (+0200) Subject: mediatek: add support for Acer Predator W6 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7e7eb5312d7810084547bb54a4b6867c2da08182;p=openwrt%2Fstaging%2F981213.git mediatek: add support for Acer Predator W6 Hardware -------- SOC: MediaTek MT7986A RAM: 1GB DDR4 FLASH: 4GB eMMC WiFi: 2x2 2.4 GHz 802.11 b/g/n/ax MT7916 DBDC 4x4 5 GHz 802.11 a/n/ac/ax MT7986 2x2 6 GHz 802.11ax MT7916 DBDC ETH: 4x LAN 1Gbit/s (MT7531) 1x WAN 2.5Gbit/s (GPY211) BTN: RESET, WPS LED: Antenna LEDs (GPIO) Mood-LED (Kinetic KTD2601) - unsupported UART: Header nest to USB port - 3V3 115200 8N1 [BUTTON] GND - RX - TX [USB] Installation ------------ 1. Connect to the device using serial console. 2. Interrupt the Autoboot process when promted by sending '0' twice. 3. Serve the OpenWrt initramfs image using TFTP at 192.168.1.66. Name the image "predator.bin" and conenct the TFTP server to the routers LAN port. 4. Configure U-Boot to allow loading unsigned images from MMC $ setenv bootcmd 'mmc read 0x40000000 0x00004400 0x0010000; fdt addr $(fdtcontroladdr); fdt rm /signature; bootm 0x40000000'; saveenv 5. Transfer the image from U-Boot $ setenv serverip 192.168.1.66; setenv ipaddr 192.168.1.1; tftpboot 0x46000000 predator.bin; fdt addr $(fdtcontroladdr); fdt rm /signature; bootm 6. Wait for OpenWrt to boot 7. Transfer the OpenWrt sysupgrade image to the router using scp. 8. Install OpenWrt using sysupgrade. Signed-off-by: David Bauer --- diff --git a/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts b/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts new file mode 100644 index 0000000000..35a2c30bb4 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts @@ -0,0 +1,503 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include +#include +#include + +#include "mt7986a.dtsi" + +/ { + model = "Acer Predator W6"; + compatible = "acer,predator-w6", "mediatek,mt7986a"; + + aliases { + serial0 = &uart0; + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "dm-mod.create=\"dm-verity,,,ro,0 31544 verity 1 PARTLABEL=rootfs PARTLABEL=rootfs 4096 4096 3943 3944 sha256 2f969fa9e9e4e20b37746f22633e85b178f5db7c143e11f92733a704299cc933 2dd56e34b15c6c84573cf26c4392028421061d2c808975217b45e9a5b49d2087\" rootfstype=squashfs,ext4 rootwait root=/dev/mmcblk0p6 fstools_ignore_partname=1"; + }; + + memory { + reg = <0 0x40000000 0 0x20000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + factory { + label = "factory"; + linux,code = ; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + }; + + + leds { + compatible = "gpio-leds"; + + led_status: led@0 { + label = "ant0:red"; + gpios = <&pio 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@1 { + label = "ant0:green"; + gpios = <&pio 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@2 { + label = "ant0:blue"; + gpios = <&pio 36 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@3 { + label = "ant1:red"; + gpios = <&pio 35 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@4 { + label = "ant1:green"; + gpios = <&pio 34 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@5 { + label = "ant1:blue"; + gpios = <&pio 33 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@6 { + label = "ant2:red"; + gpios = <&pio 38 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@7 { + label = "ant2:green"; + gpios = <&pio 37 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@8 { + label = "ant2:blue"; + gpios = <&pio 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@9 { + label = "ant3:red"; + gpios = <&pio 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@10 { + label = "ant3:green"; + gpios = <&pio 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@11 { + label = "ant3:blue"; + gpios = <&pio 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@12 { + label = "ant4:red"; + gpios = <&pio 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@13 { + label = "ant4:green"; + gpios = <&pio 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@14 { + label = "ant4:blue"; + gpios = <&pio 32 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@15 { + label = "ant5:red"; + gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@16 { + label = "ant5:green"; + gpios = <&pio 44 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@17 { + label = "ant5:blue"; + gpios = <&pio 43 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + /* LAN */ + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + /* WAN */ + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "2500base-x"; + phy-handle = <&phy6>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + phy6: phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <6>; + + reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + + /* LED0: nc ; LED1: nc ; LED2: Amber ; LED3: Green */ + mxl,led-config = <0x0 0x0 0x370 0x80>; + }; + + switch: switch@0 { + compatible = "mediatek,mt7531"; + reg = <31>; + + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + }; +}; + +&pio { + mmc0_pins_default: mmc0-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + mediatek,pull-down-adv = <2>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + mediatek,pull-down-adv = <2>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; /* pull-up 10K */ + }; + }; + + mmc0_pins_uhs: mmc0-uhs-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + mediatek,pull-down-adv = <2>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + mediatek,pull-down-adv = <2>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + mediatek,pull-up-adv = <1>; /* pull-up 10K */ + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_pereset"; + }; + }; + + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "game"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy@0 { + reg = <0>; + + mediatek,led-config = < + 0x21 0x8009 /* BASIC_CTRL */ + 0x22 0x0c00 /* ON_DURATION */ + 0x23 0x1400 /* BLINK_DURATION */ + 0x24 0xc001 /* LED0_ON_CTRL */ + 0x25 0x0000 /* LED0_BLINK_CTRL */ + 0x26 0xc007 /* LED1_ON_CTRL */ + 0x27 0x003f /* LED1_BLINK_CTRL */ + >; + }; + + phy@1 { + reg = <1>; + + mediatek,led-config = < + 0x21 0x8009 /* BASIC_CTRL */ + 0x22 0x0c00 /* ON_DURATION */ + 0x23 0x1400 /* BLINK_DURATION */ + 0x24 0xc001 /* LED0_ON_CTRL */ + 0x25 0x0000 /* LED0_BLINK_CTRL */ + 0x26 0xc007 /* LED1_ON_CTRL */ + 0x27 0x003f /* LED1_BLINK_CTRL */ + >; + }; + + phy@2 { + reg = <2>; + + mediatek,led-config = < + 0x21 0x8009 /* BASIC_CTRL */ + 0x22 0x0c00 /* ON_DURATION */ + 0x23 0x1400 /* BLINK_DURATION */ + 0x24 0xc001 /* LED0_ON_CTRL */ + 0x25 0x0000 /* LED0_BLINK_CTRL */ + 0x26 0xc007 /* LED1_ON_CTRL */ + 0x27 0x003f /* LED1_BLINK_CTRL */ + >; + }; + + phy@3 { + reg = <3>; + + mediatek,led-config = < + 0x21 0x8009 /* BASIC_CTRL */ + 0x22 0x0c00 /* ON_DURATION */ + 0x23 0x1400 /* BLINK_DURATION */ + 0x24 0xc001 /* LED0_ON_CTRL */ + 0x25 0x0000 /* LED0_BLINK_CTRL */ + 0x26 0xc007 /* LED1_ON_CTRL */ + 0x27 0x003f /* LED1_BLINK_CTRL */ + >; + }; + }; +}; + +&wifi { + status = "okay"; + pinctrl-names = "default", "dbdc"; + pinctrl-0 = <&wf_2g_5g_pins>; + pinctrl-1 = <&wf_dbdc_pins>; +}; + +&trng { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <0x08>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + hs400-ds-delay = <0x14014>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; + no-sd; + no-sdio; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 51903eeace..4013c149f1 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -8,6 +8,9 @@ mediatek_setup_interfaces() local board="$1" case $board in + acer,predator-w6) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1 + ;; asus,tuf-ax4200) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1 ;; diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata index 0fe4c69988..c3d7c09974 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata @@ -7,6 +7,20 @@ board=$(board_name) case "$FIRMWARE" in +"mediatek/mt7916_eeprom.bin") + case "$board" in + acer,predator-w6) + caldata_extract_mmc "factory" 0xA0000 0x1000 + ;; + esac + ;; +"mediatek/mt7986_eeprom_mt7976.bin") + case "$board" in + acer,predator-w6) + caldata_extract_mmc "factory" 0x0 0x1000 + ;; + esac + ;; "mediatek/mt7986_eeprom_mt7976_dbdc.bin") case "$board" in asus,tuf-ax4200) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 3620e3a6fb..ebf76640c8 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -10,6 +10,12 @@ PHYNBR=${DEVPATH##*/phy} board=$(board_name) case "$board" in + acer,predator-w6) + key_path="/var/qcidata/data" + [ "$PHYNBR" = "0" ] && cat $key_path/2gMAC > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && cat $key_path/6gMAC > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "2" ] && cat $key_path/5gMAC > /sys${DEVPATH}/macaddress + ;; asus,tuf-ax4200) CI_UBIPART="UBI_DEV" addr=$(mtd_get_mac_binary_ubi "Factory" 0x4) diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/05_extract_factory_data.sh b/target/linux/mediatek/filogic/base-files/lib/preinit/05_extract_factory_data.sh new file mode 100644 index 0000000000..87287a7d1c --- /dev/null +++ b/target/linux/mediatek/filogic/base-files/lib/preinit/05_extract_factory_data.sh @@ -0,0 +1,25 @@ +. /lib/functions/system.sh + +predator_w6_factory_extract() { + local mmc_part + + mmc_part="$(find_mmc_part qcidata)" + + mkdir -p /var/qcidata/data + mkdir -p /var/qcidata/mount + + mount -r "$mmc_part" /var/qcidata/mount + + cp /var/qcidata/mount/factory/*MAC "/var/qcidata/data/" + umount "/var/qcidata/mount" +} + +preinit_extract_factory() { + case $(board_name) in + acer,predator-w6) + predator_w6_factory_extract + ;; + esac +} + +boot_hook_add preinit_main preinit_extract_factory diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh index cfddd9cedc..69d0ab6c60 100644 --- a/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh +++ b/target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh @@ -2,6 +2,14 @@ preinit_set_mac_address() { case $(board_name) in + acer,predator-w6) + key_path="/var/qcidata/data" + ip link set dev lan1 address "$(cat $key_path/LANMAC)" + ip link set dev lan2 address "$(cat $key_path/LANMAC)" + ip link set dev lan3 address "$(cat $key_path/LANMAC)" + ip link set dev game address "$(cat $key_path/LANMAC)" + ip link set dev eth1 address "$(cat $key_path/WANMAC)" + ;; asus,tuf-ax4200) CI_UBIPART="UBI_DEV" addr=$(mtd_get_mac_binary_ubi "Factory" 0x4) diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 858e11ff00..b0585284ca 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -51,6 +51,11 @@ platform_do_upgrade() { local board=$(board_name) case "$board" in + acer,predator-w6) + CI_KERNPART="kernel" + CI_ROOTPART="rootfs" + emmc_do_upgrade "$1" + ;; asus,tuf-ax4200) CI_UBIPART="UBI_DEV" CI_KERNPART="linux" diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index d79e929901..e008c23c0a 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -98,6 +98,21 @@ define Device/asus_tuf-ax4200 endef TARGET_DEVICES += asus_tuf-ax4200 +define Device/acer_predator-w6 + DEVICE_VENDOR := Acer + DEVICE_MODEL := Predator W6 + DEVICE_DTS := mt7986a-acer-predator-w6 + DEVICE_DTS_DIR := ../dts + DEVICE_DTS_LOADADDR := 0x47000000 + DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware + IMAGES := sysupgrade.bin + KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += acer_predator-w6 + define Device/bananapi_bpi-r3 DEVICE_VENDOR := Bananapi DEVICE_MODEL := BPi-R3