From: Ville Syrjälä Date: Tue, 29 Apr 2014 10:35:49 +0000 (+0300) Subject: drm/i915: Add a small adjustment to the pixel counter on interlaced modes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7e78f1cb387e4b6fe2c33adcc987b114516a093f;p=openwrt%2Fstaging%2Fblogic.git drm/i915: Add a small adjustment to the pixel counter on interlaced modes In interlaced modes, the pixel counter counts all pixels, so one field will have htotal more pixels. In order to avoid the reported position from jumping backwards when the pixel counter is beyond the length of the shorter field, just clamp the position the length of the shorter field. This matches how the scanline counter based position works since the scanline counter doesn't count the two half lines. Signed-off-by: Ville Syrjälä Reviewed-by: "Akash Goel " Reviewed-by: "Sourab Gupta " Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 20432762d30f..cfa4d369c98c 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -914,6 +914,18 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, vbl_end *= htotal; vtotal *= htotal; + /* + * In interlaced modes, the pixel counter counts all pixels, + * so one field will have htotal more pixels. In order to avoid + * the reported position from jumping backwards when the pixel + * counter is beyond the length of the shorter field, just + * clamp the position the length of the shorter field. This + * matches how the scanline counter based position works since + * the scanline counter doesn't count the two half lines. + */ + if (position >= vtotal) + position = vtotal - 1; + /* * Start of vblank interrupt is triggered at start of hsync, * just prior to the first active line of vblank. However we