From: Connor McAdams Date: Tue, 8 May 2018 17:20:08 +0000 (-0400) Subject: ALSA: hda/ca0132: Add dsp setup + gpio functions for r3di X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7e6ed62ebedb352be3a6f0907bcab25789db7914;p=openwrt%2Fstaging%2Fblogic.git ALSA: hda/ca0132: Add dsp setup + gpio functions for r3di Adds dsp setup functions for Recon3Di as well as the GPIO functions specific to it. Signed-off-by: Connor McAdams Reviewed-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index bd7b30a43d4f..dd98b7731dc4 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -2907,6 +2907,76 @@ static void ca0132_gpio_setup(struct hda_codec *codec) } } +/* + * GPIO control functions for the Recon3D integrated. + */ + +enum r3di_gpio_bit { + /* Bit 1 - Switch between front/rear mic. 0 = rear, 1 = front */ + R3DI_MIC_SELECT_BIT = 1, + /* Bit 2 - Switch between headphone/line out. 0 = Headphone, 1 = Line */ + R3DI_OUT_SELECT_BIT = 2, + /* + * I dunno what this actually does, but it stays on until the dsp + * is downloaded. + */ + R3DI_GPIO_DSP_DOWNLOADING = 3, + /* + * Same as above, no clue what it does, but it comes on after the dsp + * is downloaded. + */ + R3DI_GPIO_DSP_DOWNLOADED = 4 +}; + +enum r3di_mic_select { + /* Set GPIO bit 1 to 0 for rear mic */ + R3DI_REAR_MIC = 0, + /* Set GPIO bit 1 to 1 for front microphone*/ + R3DI_FRONT_MIC = 1 +}; + +enum r3di_out_select { + /* Set GPIO bit 2 to 0 for headphone */ + R3DI_HEADPHONE_OUT = 0, + /* Set GPIO bit 2 to 1 for speaker */ + R3DI_LINE_OUT = 1 +}; +enum r3di_dsp_status { + /* Set GPIO bit 3 to 1 until DSP is downloaded */ + R3DI_DSP_DOWNLOADING = 0, + /* Set GPIO bit 4 to 1 once DSP is downloaded */ + R3DI_DSP_DOWNLOADED = 1 +}; + +static void r3di_gpio_dsp_status_set(struct hda_codec *codec, + enum r3di_dsp_status dsp_status) +{ + unsigned int cur_gpio; + + /* Get the current GPIO Data setup */ + cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0); + + switch (dsp_status) { + case R3DI_DSP_DOWNLOADING: + cur_gpio |= (1 << R3DI_GPIO_DSP_DOWNLOADING); + snd_hda_codec_write(codec, codec->core.afg, 0, + AC_VERB_SET_GPIO_DATA, cur_gpio); + break; + case R3DI_DSP_DOWNLOADED: + /* Set DOWNLOADING bit to 0. */ + cur_gpio &= ~(1 << R3DI_GPIO_DSP_DOWNLOADING); + + snd_hda_codec_write(codec, codec->core.afg, 0, + AC_VERB_SET_GPIO_DATA, cur_gpio); + + cur_gpio |= (1 << R3DI_GPIO_DSP_DOWNLOADED); + break; + } + + snd_hda_codec_write(codec, codec->core.afg, 0, + AC_VERB_SET_GPIO_DATA, cur_gpio); +} + /* * PCM callbacks */ @@ -4542,6 +4612,30 @@ static void ca0132_refresh_widget_caps(struct hda_codec *codec) } } +/* + * Recon3Di r3di_setup_defaults sub functions. + */ + +static void r3di_dsp_initial_mic_setup(struct hda_codec *codec) +{ + unsigned int tmp; + + /* Mic 1 Setup */ + chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); + /* This ConnPointID is unique to Recon3Di. Haven't seen it elsewhere */ + chipio_set_conn_rate(codec, 0x0F, SR_96_000); + tmp = FLOAT_ONE; + dspio_set_uint_param(codec, 0x80, 0x00, tmp); + + /* Mic 2 Setup, even though it isn't connected on SBZ */ + chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, SR_96_000); + chipio_set_conn_rate(codec, 0x0F, SR_96_000); + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x80, 0x01, tmp); +} + /* * Initialize Sound Blaster Z analog microphones. */ @@ -4703,6 +4797,50 @@ static void ca0132_setup_defaults(struct hda_codec *codec) dspio_set_uint_param(codec, 0x31, 0x00, tmp); } +/* + * Setup default parameters for Recon3Di DSP. + */ + +static void r3di_setup_defaults(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int tmp; + int num_fx; + int idx, i; + + if (spec->dsp_state != DSP_DOWNLOADED) + return; + + + r3di_dsp_initial_mic_setup(codec); + + /*remove DSP headroom*/ + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x96, 0x3C, tmp); + + /* set WUH source */ + tmp = FLOAT_TWO; + dspio_set_uint_param(codec, 0x31, 0x00, tmp); + chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); + + /* Set speaker source? */ + dspio_set_uint_param(codec, 0x32, 0x00, tmp); + + r3di_gpio_dsp_status_set(codec, R3DI_DSP_DOWNLOADED); + + /* Setup effect defaults */ + num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; + for (idx = 0; idx < num_fx; idx++) { + for (i = 0; i <= ca0132_effects[idx].params; i++) { + dspio_set_uint_param(codec, + ca0132_effects[idx].mid, + ca0132_effects[idx].reqs[i], + ca0132_effects[idx].def_vals[i]); + } + } + +} + /* * Setup default parameters for the Sound Blaster Z DSP. A lot more going on * than the Chromebook setup. @@ -5401,6 +5539,7 @@ static void ca0132_alt_init(struct hda_codec *codec) codec_dbg(codec, "R3DI alt_init"); ca0132_gpio_init(codec); ca0132_gpio_setup(codec); + r3di_gpio_dsp_status_set(codec, R3DI_DSP_DOWNLOADING); r3di_pre_dsp_setup(codec); snd_hda_sequence_write(codec, spec->chip_init_verbs); snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x6FF, 0xC4); @@ -5449,21 +5588,29 @@ static int ca0132_init(struct hda_codec *codec) ca0132_init_unsol(codec); ca0132_init_params(codec); ca0132_init_flags(codec); + snd_hda_sequence_write(codec, spec->base_init_verbs); if (spec->quirk != QUIRK_NONE) ca0132_alt_init(codec); ca0132_download_dsp(codec); + ca0132_refresh_widget_caps(codec); if (spec->quirk == QUIRK_SBZ) writew(0x0107, spec->mem_base + 0x320); - if (spec->quirk != QUIRK_SBZ) { + switch (spec->quirk) { + case QUIRK_R3DI: + r3di_setup_defaults(codec); + break; + case QUIRK_NONE: + case QUIRK_ALIENWARE: ca0132_setup_defaults(codec); ca0132_init_analog_mic2(codec); ca0132_init_dmic(codec); + break; } for (i = 0; i < spec->num_outputs; i++)