From: Brenda J. Butler Date: Tue, 31 Oct 2017 18:25:46 +0000 (-0400) Subject: tc-testing: very simple example test cases X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7dfbe5b64fe8f619bc056a7f81421e8beab373f1;p=openwrt%2Fstaging%2Fblogic.git tc-testing: very simple example test cases As part of documentation, supply some very simple test cases to illustrate how test cases work. One test case shows commands in the setup, command, verify and teardown stages. Other test cases show how to have a working test case that does not have commands in the setup, verify and/or teardown stages. Specifically, the command lists for setup and teardown can be empty. And the verify command must have a command, but it can be /bin/true. The regex must have a string, we recommend a single space, and the count of matches must be zero if you do not want to use the match feature of verify. Verify will always look for a return code of success (0) so we give /bin/true when we do not want to make a check there. Also, update the documentation for testcases to be more specific in the cases of: - accepting non-success return codes in setup and teardown stages - how to write the test when no setup, teardown and/or verify are desired. To run the example test cases: $ sudo -E ./tdc.py -f creating-testcases/example.json -l 1f: (example) simple test to test framework 2f: (example) simple test, no need for verify 3f: (example) simple test, no need for setup or teardown (or verify) $ sudo -E ./tdc.py -f creating-testcases/example.json Test 1f: simple test to test framework Test 2f: simple test, no need for verify Test 3f: simple test, no need for setup or teardown (or verify) All test results: 1..3 ok 1 1f simple test to test framework ok 2 2f simple test, no need for verify ok 3 3f simple test, no need for setup or teardown (or verify) $ Signed-off-by: Brenda J. Butler Acked-by: Lucas Bates Signed-off-by: David S. Miller --- diff --git a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt index 4e09257bc443..00438331ba47 100644 --- a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt +++ b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt @@ -34,6 +34,12 @@ category: A list of single-word descriptions covering what the command setup: The list of commands required to ensure the command under test succeeds. For example: if testing a filter, the command to create the qdisc would appear here. + This list can be empty. + Each command can be a string to be executed, or a list consisting + of a string which is a command to be executed, followed by 1 or + more acceptable exit codes for this command. + If only a string is given for the command, then an exit code of 0 + will be expected. cmdUnderTest: The tc command being tested itself. expExitCode: The code returned by the command under test upon its termination. tdc will compare this value against the actual returned value. @@ -49,6 +55,12 @@ matchCount: How many times the regex in matchPattern should match. A value teardown: The list of commands to clean up after the test is completed. The environment should be returned to the same state as when this test was started: qdiscs deleted, actions flushed, etc. + This list can be empty. + Each command can be a string to be executed, or a list consisting + of a string which is a command to be executed, followed by 1 or + more acceptable exit codes for this command. + If only a string is given for the command, then an exit code of 0 + will be expected. SETUP/TEARDOWN ERRORS diff --git a/tools/testing/selftests/tc-testing/creating-testcases/example.json b/tools/testing/selftests/tc-testing/creating-testcases/example.json new file mode 100644 index 000000000000..5ec501200970 --- /dev/null +++ b/tools/testing/selftests/tc-testing/creating-testcases/example.json @@ -0,0 +1,55 @@ +[ + { + "id": "1f", + "name": "simple test to test framework", + "category": [ + "example" + ], + "setup": [ + "mkdir mytest" + ], + "cmdUnderTest": "touch mytest/blorfl", + "expExitCode": "0", + "verifyCmd": "ls mytest/* | grep '[b]lorfl'", + "matchPattern": "orfl", + "matchCount": "1", + "teardown": [ + "rm -rf mytest" + ] + }, + { + "id": "2f", + "name": "simple test, no need for verify", + "category": [ + "example" + ], + "setup": [ + "mkdir mytest", + "touch mytest/blorfl" + ], + "cmdUnderTest": "ls mytest/blorfl", + "expExitCode": "0", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + "rm -rf mytest" + ] + }, + { + "id": "3f", + "name": "simple test, no need for setup or teardown (or verify)", + "category": [ + "example" + ], + "setup": [ + ], + "cmdUnderTest": "ip l l lo", + "expExitCode": "0", + "verifyCmd": "/bin/true", + "matchPattern": " ", + "matchCount": "0", + "teardown": [ + ] + } +] diff --git a/tools/testing/selftests/tc-testing/creating-testcases/template.json b/tools/testing/selftests/tc-testing/creating-testcases/template.json index 87971744bdd4..8b99b86d65bd 100644 --- a/tools/testing/selftests/tc-testing/creating-testcases/template.json +++ b/tools/testing/selftests/tc-testing/creating-testcases/template.json @@ -26,7 +26,13 @@ "" ], "setup": [ - "" + "", + [ + "", + 0, + 1, + 255 + ] ], "cmdUnderTest": "", "expExitCode": "", @@ -34,7 +40,12 @@ "matchPattern": "", "matchCount": "", "teardown": [ - "" + "", + [ + "", + 0, + 255 + ] ] } ]