From: John Crispin Date: Mon, 15 Sep 2014 10:19:38 +0000 (+0000) Subject: ar71xx: add qihoo 360 c301 router support X-Git-Tag: reboot~5939 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7dbbdfb61f99a765ff02d40daa1d63c769df41ef;p=openwrt%2Fstaging%2Flynxis.git ar71xx: add qihoo 360 c301 router support Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac. Its chipset is AR9344 + AR9882 with two 16MB flashes. This patch adds its initial support. v2: * use mtd_get_mac_ascii to fetch MAC address for ath10k. * use ath79_register_pci to initialize AR9882. Signed-off-by: Weijie Gao SVN-Revision: 42552 --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index fba6032271..ac7e20d7f0 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -166,6 +166,9 @@ get_status_led() { oolite) status_led="oolite:red:system" ;; + qihoo-c301) + status_led="qihoo:green:status" + ;; tew-632brp) status_led="tew-632brp:green:status" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index 3f97d37f12..ef6cf0b53a 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -192,6 +192,10 @@ om5p) ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1" ;; +qihoo-c301) + ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt" + ;; + smart-300) ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0" ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 8a0159c01a..fdbca5166b 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -347,6 +347,7 @@ hiwifi-hc6361 |\ ja76pf |\ mynet-n600 |\ oolite |\ +qihoo-c301 |\ rb-750 |\ rb-751 |\ tew-632brp |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index a7cbb80946..78d67fae4d 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -433,6 +433,9 @@ ar71xx_board_detect() { *PB92) name="pb92" ;; + *"Qihoo 360 C301") + name="qihoo-c301" + ;; *"RouterBOARD 411/A/AH") name="rb-411" ;; diff --git a/target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin b/target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin index a28932f824..2c06d7f1a1 100644 --- a/target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin +++ b/target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin @@ -24,6 +24,23 @@ do_load_ath10k_board_bin() { bs=1 skip=20492 count=2104 >> /tmp/ath10k-board.bin ;; + qihoo-c301) + local mac + + mac=$(mtd_get_mac_ascii devdata wlan5mac) + + if [ -z "$mac" ]; then + mac=$(macaddr_add $(cat /sys/class/net/eth0/address) -2) + fi + + dd if=/dev/mtdblock10 \ + bs=1 skip=20480 count=6 \ + of=/tmp/ath10k-board.bin + macaddr_2bin $mac >> /tmp/ath10k-board.bin + dd if=/dev/mtdblock10 \ + bs=1 skip=20492 count=2104 >> /tmp/ath10k-board.bin + + ;; esac [ -f /tmp/ath10k-board.bin ] || { return diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index d1617bfb44..b8b2fa9980 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -226,6 +226,7 @@ platform_check_image() { return 1 ;; + qihoo-c301 | \ mynet-n600 | \ mynet-n750) [ "$magic_long" != "5ea3a417" ] && { diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 index 9a8378a0cb..48ff4919c1 100644 --- a/target/linux/ar71xx/config-3.10 +++ b/target/linux/ar71xx/config-3.10 @@ -72,6 +72,7 @@ CONFIG_ATH79_MACH_OM5P=y CONFIG_ATH79_MACH_PB42=y CONFIG_ATH79_MACH_PB44=y CONFIG_ATH79_MACH_PB92=y +CONFIG_ATH79_MACH_QIHOO_C301=y # CONFIG_ATH79_MACH_RB2011 is not set # CONFIG_ATH79_MACH_RB4XX is not set # CONFIG_ATH79_MACH_RB750 is not set diff --git a/target/linux/ar71xx/config-3.14 b/target/linux/ar71xx/config-3.14 index c642913cda..0996ccb9b7 100644 --- a/target/linux/ar71xx/config-3.14 +++ b/target/linux/ar71xx/config-3.14 @@ -73,6 +73,7 @@ CONFIG_ATH79_MACH_OM5P=y CONFIG_ATH79_MACH_PB42=y CONFIG_ATH79_MACH_PB44=y CONFIG_ATH79_MACH_PB92=y +CONFIG_ATH79_MACH_QIHOO_C301=y # CONFIG_ATH79_MACH_RB2011 is not set # CONFIG_ATH79_MACH_RB4XX is not set # CONFIG_ATH79_MACH_RB750 is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c new file mode 100644 index 0000000000..08a602f78d --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c @@ -0,0 +1,166 @@ +/* + * Qihoo 360 C301 board support + * + * Copyright (C) 2013 Gabor Juhos + * Copyright (C) 2014 Weijie Gao + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "nvram.h" + +#define QIHOO_C301_GPIO_LED_STATUS_GREEN 0 +#define QIHOO_C301_GPIO_LED_STATUS_RED 11 + +#define QIHOO_C301_GPIO_LED_WAN 1 +#define QIHOO_C301_GPIO_LED_LAN1 2 +#define QIHOO_C301_GPIO_LED_LAN2 3 +#define QIHOO_C301_GPIO_ETH_LEN_EN 18 + +#define QIHOO_C301_GPIO_BTN_RESET 16 + +#define QIHOO_C301_GPIO_USB_POWER 19 + +#define QIHOO_C301_GPIO_SPI_CS1 12 + +#define QIHOO_C301_GPIO_EXTERNAL_LNA0 14 +#define QIHOO_C301_GPIO_EXTERNAL_LNA1 15 + +#define QIHOO_C301_KEYS_POLL_INTERVAL 20 /* msecs */ +#define QIHOO_C301_KEYS_DEBOUNCE_INTERVAL \ + (3 * QIHOO_C301_KEYS_POLL_INTERVAL) + +#define QIHOO_C301_WMAC_CALDATA_OFFSET 0x1000 + +#define QIHOO_C301_NVRAM_ADDR 0x1f058010 +#define QIHOO_C301_NVRAM_SIZE 0x7ff0 + +static struct gpio_led qihoo_c301_leds_gpio[] __initdata = { + { + .name = "qihoo:green:status", + .gpio = QIHOO_C301_GPIO_LED_STATUS_GREEN, + .active_low = 1, + }, + { + .name = "qihoo:red:status", + .gpio = QIHOO_C301_GPIO_LED_STATUS_RED, + .active_low = 1, + }, +}; + +static struct gpio_keys_button qihoo_c301_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = QIHOO_C301_KEYS_DEBOUNCE_INTERVAL, + .gpio = QIHOO_C301_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +struct flash_platform_data flash __initdata = {NULL, NULL, 0}; + +static void qihoo_c301_get_mac(const char *name, char *mac) +{ + u8 *nvram = (u8 *) KSEG1ADDR(QIHOO_C301_NVRAM_ADDR); + int err; + + err = ath79_nvram_parse_mac_addr(nvram, QIHOO_C301_NVRAM_SIZE, + name, mac); + if (err) + pr_err("no MAC address found for %s\n", name); +} + +static void __init qihoo_c301_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 tmpmac[ETH_ALEN]; + + ath79_register_m25p80_multi(&flash); + + ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); + + ath79_gpio_output_select(QIHOO_C301_GPIO_LED_WAN, + AR934X_GPIO_OUT_LED_LINK4); + ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN1, + AR934X_GPIO_OUT_LED_LINK1); + ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN2, + AR934X_GPIO_OUT_LED_LINK2); + + ath79_gpio_output_select(QIHOO_C301_GPIO_SPI_CS1, + AR934X_GPIO_OUT_SPI_CS1); + + gpio_request_one(QIHOO_C301_GPIO_ETH_LEN_EN, + GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, + "Ethernet LED enable"); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(qihoo_c301_leds_gpio), + qihoo_c301_leds_gpio); + + ath79_register_gpio_keys_polled(-1, QIHOO_C301_KEYS_POLL_INTERVAL, + ARRAY_SIZE(qihoo_c301_gpio_keys), + qihoo_c301_gpio_keys); + + ath79_wmac_set_ext_lna_gpio(0, QIHOO_C301_GPIO_EXTERNAL_LNA0); + ath79_wmac_set_ext_lna_gpio(1, QIHOO_C301_GPIO_EXTERNAL_LNA1); + + qihoo_c301_get_mac("wlan24mac=", tmpmac); + ath79_register_wmac(art + QIHOO_C301_WMAC_CALDATA_OFFSET, tmpmac); + + ath79_register_pci(); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE | + AR934X_ETH_CFG_SW_PHY_SWAP); + + ath79_register_mdio(1, 0x0); + + /* LAN */ + qihoo_c301_get_mac("lanmac=", ath79_eth1_data.mac_addr); + + /* GMAC1 is connected to the internal switch */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + + ath79_register_eth(1); + + /* WAN */ + qihoo_c301_get_mac("wanmac=", ath79_eth0_data.mac_addr); + + /* GMAC0 is connected to the PHY4 of the internal switch */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + + ath79_register_eth(0); + + gpio_request_one(QIHOO_C301_GPIO_USB_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB power"); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_QIHOO_C301, "QIHOO-C301", "Qihoo 360 C301", + qihoo_c301_setup); diff --git a/target/linux/ar71xx/generic/profiles/qihoo.mk b/target/linux/ar71xx/generic/profiles/qihoo.mk new file mode 100644 index 0000000000..0ec778ab2b --- /dev/null +++ b/target/linux/ar71xx/generic/profiles/qihoo.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2013 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/QIHOO360 + NAME:=Qihoo 360 C301 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev kmod-ath10k +endef + +define Profile/QIHOO360/Description + Package set optimized for the Qihoo 360 C301 device. +endef +$(eval $(call Profile,QIHOO360)) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 41c125a2ca..b374391a4b 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -290,6 +290,7 @@ zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro,6848k@0x130000(filesystem) zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi) +qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata) define Image/BuildKernel @@ -1156,6 +1157,8 @@ $(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0, $(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,1310720,16187392)) $(eval $(call SingleProfile,Seama,64k,MYNETN750,mynet-n750,MYNET-N750,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd13_wd_av,1310720,16187392)) +$(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_mtdlayout),wrgac26_qihoo360_360rg,1310720,16121856)) + $(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout))) $(eval $(call SingleProfile,TPLINKOLD,squashfs-only,TLWR841NV15,tl-wr841nd-v1.5,TL-WR841N-v1.5,ttyS0,115200,0x08410002,2,4M)) diff --git a/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch index 81a997b85e..214aa7353f 100644 --- a/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch +++ b/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch @@ -207,7 +207,7 @@ #define AR934X_GPIO_REG_FUNC 0x6c #define AR71XX_GPIO_COUNT 16 -@@ -561,4 +664,148 @@ +@@ -561,4 +664,149 @@ #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13 #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7 @@ -279,6 +279,7 @@ +#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1) + +#define AR934X_GPIO_OUT_GPIO 0 ++#define AR934X_GPIO_OUT_SPI_CS1 7 +#define AR934X_GPIO_OUT_LED_LINK0 41 +#define AR934X_GPIO_OUT_LED_LINK1 42 +#define AR934X_GPIO_OUT_LED_LINK2 43 diff --git a/target/linux/ar71xx/patches-3.10/726-MIPS-ath79-add-qihoo-360-c301-support.patch b/target/linux/ar71xx/patches-3.10/726-MIPS-ath79-add-qihoo-360-c301-support.patch new file mode 100644 index 0000000000..6be83b0bb0 --- /dev/null +++ b/target/linux/ar71xx/patches-3.10/726-MIPS-ath79-add-qihoo-360-c301-support.patch @@ -0,0 +1,40 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -1034,6 +1034,17 @@ + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_QIHOO_C301 ++ bool "Qihoo 360 C301 board support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_USB ++ select ATH79_NVRAM ++ + endmenu + + config SOC_AR71XX +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -80,6 +80,7 @@ + ATH79_MACH_OM5P, /* OpenMesh OM5P */ + ATH79_MACH_PB42, /* Atheros PB42 */ + ATH79_MACH_PB92, /* Atheros PB92 */ ++ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */ + ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ + ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ + ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -85,6 +85,7 @@ + obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o + obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o + obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o ++obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o + obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o + obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o + obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o diff --git a/target/linux/ar71xx/patches-3.14/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-3.14/601-MIPS-ath79-add-more-register-defines.patch index 79e53b3460..2dec0209d7 100644 --- a/target/linux/ar71xx/patches-3.14/601-MIPS-ath79-add-more-register-defines.patch +++ b/target/linux/ar71xx/patches-3.14/601-MIPS-ath79-add-more-register-defines.patch @@ -207,7 +207,7 @@ #define AR934X_GPIO_REG_FUNC 0x6c #define AR71XX_GPIO_COUNT 16 -@@ -560,4 +663,148 @@ +@@ -560,4 +663,149 @@ #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13 #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7 @@ -279,6 +279,7 @@ +#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1) + +#define AR934X_GPIO_OUT_GPIO 0 ++#define AR934X_GPIO_OUT_SPI_CS1 7 +#define AR934X_GPIO_OUT_LED_LINK0 41 +#define AR934X_GPIO_OUT_LED_LINK1 42 +#define AR934X_GPIO_OUT_LED_LINK2 43 diff --git a/target/linux/ar71xx/patches-3.14/726-MIPS-ath79-add-qihoo-360-c301-support.patch b/target/linux/ar71xx/patches-3.14/726-MIPS-ath79-add-qihoo-360-c301-support.patch new file mode 100644 index 0000000000..6be83b0bb0 --- /dev/null +++ b/target/linux/ar71xx/patches-3.14/726-MIPS-ath79-add-qihoo-360-c301-support.patch @@ -0,0 +1,40 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -1034,6 +1034,17 @@ + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_QIHOO_C301 ++ bool "Qihoo 360 C301 board support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_USB ++ select ATH79_NVRAM ++ + endmenu + + config SOC_AR71XX +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -80,6 +80,7 @@ + ATH79_MACH_OM5P, /* OpenMesh OM5P */ + ATH79_MACH_PB42, /* Atheros PB42 */ + ATH79_MACH_PB92, /* Atheros PB92 */ ++ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */ + ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ + ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ + ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -85,6 +85,7 @@ + obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o + obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o + obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o ++obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o + obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o + obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o + obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o