From: Vaibhav Bedia Date: Fri, 20 Apr 2012 07:58:16 +0000 (+0530) Subject: am335x: ddr_defs: Update EMIF parameters X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7d8a961d31965799b5ede64e0992232e04c2d009;p=project%2Fbcm63xx%2Fu-boot.git am335x: ddr_defs: Update EMIF parameters EMIF parameters are calculated based on the AC timing parameters from the SDRAM datasheet and the DDR frequency. Current values for these paramters in AM335x U-Boot code, though reliable, are not fully optimal. The most optimal settings can be derived based on the guidelines published at [1]. A pre-computed set of values with the most optimum settings for AM335x EVM and BeagleBone can be found at [2]. [1] http://processors.wiki.ti.com/index.php/AM335x_EMIF_Configuration_tips [2] http://processors.wiki.ti.com/index.php/OMAP_and_Sitara_CCS_support#AM335x Signed-off-by: Vaibhav Bedia Signed-off-by: Tom Rini --- diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index b4735bac21..879c5fbfa7 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -29,11 +29,11 @@ #define CMD_DELAY 0x00 #define PHY_DLL_LOCK_DIFF 0x0 -#define DDR2_EMIF_READ_LATENCY 0x05 -#define DDR2_EMIF_TIM1 0x0666B3D6 -#define DDR2_EMIF_TIM2 0x143731DA -#define DDR2_EMIF_TIM3 0x00000347 -#define DDR2_EMIF_SDCFG 0x43805332 +#define DDR2_EMIF_READ_LATENCY 0x100005 /* Enable Dynamic Power Down */ +#define DDR2_EMIF_TIM1 0x0666B3C9 +#define DDR2_EMIF_TIM2 0x243631CA +#define DDR2_EMIF_TIM3 0x0000033F +#define DDR2_EMIF_SDCFG 0x41805332 #define DDR2_EMIF_SDREF 0x0000081a #define DDR2_DLL_LOCK_DIFF 0x0 #define DDR2_RATIO 0x80