From: David Bauer Date: Sun, 12 Aug 2018 23:48:39 +0000 (+0200) Subject: ath79: add QCA956x GMAC config X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7d1b742b4d18636b26b09142b7265215bf4eff32;p=openwrt%2Fstaging%2Fdangole.git ath79: add QCA956x GMAC config This commit adds the ability to configure the GMAC of the QCA956x. Signed-off-by: David Bauer --- diff --git a/target/linux/ath79/dts/qca956x.dtsi b/target/linux/ath79/dts/qca956x.dtsi index 10c88eedc2..8145371747 100644 --- a/target/linux/ath79/dts/qca956x.dtsi +++ b/target/linux/ath79/dts/qca956x.dtsi @@ -222,6 +222,11 @@ #address-cells = <1>; #size-cells = <0>; }; + + gmac: gmac@18070000 { + compatible = "qca,qca9560-gmac"; + reg = <0x18070000 0x64>; + }; }; usb_phy0: usb-phy { diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c index 55a8f57f15..2e5fb3a641 100644 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c +++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c @@ -75,6 +75,17 @@ static void ag71xx_setup_gmac_955x(struct device_node *np, void __iomem *base) __raw_writel(val, base + QCA955X_GMAC_REG_ETH_CFG); } +static void ag71xx_setup_gmac_956x(struct device_node *np, void __iomem *base) +{ + u32 val = __raw_readl(base + QCA956X_GMAC_REG_ETH_CFG); + + ag71xx_of_bit(np, "switch-phy-swap", &val, QCA956X_ETH_CFG_SW_PHY_SWAP); + ag71xx_of_bit(np, "switch-phy-addr-swap", &val, + QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP); + + __raw_writel(val, base + QCA956X_GMAC_REG_ETH_CFG); +} + int ag71xx_setup_gmac(struct device_node *np) { struct device_node *np_dev; @@ -102,6 +113,8 @@ int ag71xx_setup_gmac(struct device_node *np) ag71xx_setup_gmac_934x(np, base); else if (of_device_is_compatible(np_dev, "qca,qca9550-gmac")) ag71xx_setup_gmac_955x(np, base); + else if (of_device_is_compatible(np_dev, "qca,qca9560-gmac")) + ag71xx_setup_gmac_956x(np, base); iounmap(base);