From: Sander Vanheule <sander@svanheule.net>
Date: Sun, 5 Jun 2022 09:57:04 +0000 (+0200)
Subject: ath79: TP-Link EAP225 v1: convert ath10k to nvmem-cells
X-Git-Tag: v23.05.0-rc1~3261
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7cf3a37957573576dac56978b0613f701853f7e2;p=openwrt%2Fstaging%2Fhauke.git

ath79: TP-Link EAP225 v1: convert ath10k to nvmem-cells

Add the PCIe node for the ath10k radio to the devicetree, and refer to
the art partition for the calibration data using nvmem-cells.

Use mac-address-increment to ensure the MAC address is set correctly,
and remove the device from the caldata extraction and patching script.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
---

diff --git a/target/linux/ath79/dts/qca9563_tplink_eap225-v1.dts b/target/linux/ath79/dts/qca9563_tplink_eap225-v1.dts
index 20fd55b409..f4ac2c6d8d 100644
--- a/target/linux/ath79/dts/qca9563_tplink_eap225-v1.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_eap225-v1.dts
@@ -49,3 +49,21 @@
 		};
 	};
 };
+
+&art {
+	calibration_ath10k: calibration@5000 {
+		reg = <0x5000 0x844>;
+	};
+};
+
+&pcie {
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0 0 0 0 0>;
+
+		mac-address-increment = <1>;
+
+		nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>;
+		nvmem-cell-names = "mac-address", "calibration";
+	};
+};
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 650d444fe6..4e640f9e1b 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -145,13 +145,6 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) 2)
 		;;
-	tplink,eap225-v1|\
-	tplink,re450-v2|\
-	tplink,re450-v3|\
-	tplink,re455-v1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
-		;;
 	tplink,re350k-v1)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 2)
@@ -161,6 +154,12 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 		;;
+	tplink,re450-v2|\
+	tplink,re450-v3|\
+	tplink,re455-v1)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+		;;
 	tplink,tl-wpa8630-v1)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) 1)