From: Felix Fietkau Date: Tue, 14 Jun 2016 08:44:56 +0000 (+0200) Subject: Revert "ar71xx: enable flow control for ethernet MACs with built-in switch" X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7c02ecdd35c2b0e4e486e3be816cae2490b7c402;p=openwrt%2Fstaging%2Fneocturne.git Revert "ar71xx: enable flow control for ethernet MACs with built-in switch" This reverts commit 1beb5bec6453abb220c5be4ddb9e6dc02d08d735. It was found to cause the WAN port to fail on some AR934x devices Signed-off-by: Felix Fietkau --- diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c index d5253609cd..38226cf22e 100644 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c +++ b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c @@ -453,17 +453,9 @@ static void ag71xx_hw_stop(struct ag71xx *ag) static void ag71xx_hw_setup(struct ag71xx *ag) { struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); - struct ag71xx_mdio_platform_data *mpdata; - u32 init = MAC_CFG1_INIT; - - if (pdata->mii_bus_dev && ag->pdev->id == 0) { - mpdata = pdata->mii_bus_dev->platform_data; - if (mpdata && mpdata->builtin_switch) - init |= MAC_CFG1_TFC | MAC_CFG1_RFC; - } /* setup MAC configuration registers */ - ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, init); + ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT); ag71xx_sb(ag, AG71XX_REG_MAC_CFG2, MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);