From: Sven Eckelmann Date: Wed, 30 Dec 2020 20:56:55 +0000 (+0100) Subject: ath79: apply Engenius EAP600 style to OpenMesh MR600 RGMII cfg X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7b772e07ea0cf637994a2c5631c1f28756c6b5a3;p=openwrt%2Fstaging%2Fblocktrron.git ath79: apply Engenius EAP600 style to OpenMesh MR600 RGMII cfg The OpenMesh MR600 is a modified version of the EAP600 family. These devices are shipped with an AR803x PHY and had various problems with the delay configuration in ar71xx. These problems are now in the past [1] and parts of the delay configuration should now be done in the PHY only. Just switch to the configuration of the EAP600 to have an already well tested configuration for ath79 with the newer kernel versions. [1] https://github.com/openwrt/openwrt/pull/3505#issuecomment-716050292 Reported-by: Michael Pratt Signed-off-by: Sven Eckelmann --- diff --git a/target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi b/target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi index 987a32e344..8517576787 100644 --- a/target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi +++ b/target/linux/ath79/dts/ar9344_openmesh_mr600.dtsi @@ -99,16 +99,18 @@ ð0 { status = "okay"; - pll-data = <0x06000000 0x00000101 0x00001313>; + pll-data = <0x02000000 0x00000101 0x00001313>; mtd-mac-address = <&art 0x0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; gmac-config { device = <&gmac>; rgmii-gmac0 = <1>; + rxdv-delay = <3>; + rxd-delay = <3>; }; };