From: Ville Syrjälä Date: Thu, 16 Oct 2014 18:27:35 +0000 (+0300) Subject: drm/i915: Fix eDP link training when switching pipes on VLV/CHV X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7b713f50d78b68c04c86eb21e59faf7247aa2cd1;p=openwrt%2Fstaging%2Fblogic.git drm/i915: Fix eDP link training when switching pipes on VLV/CHV When switching from one pipe to another, the power sequencer of the new pipe seems to need a bit of kicking to lock into the port. Even the vdd force bit doesn't work before the power sequencer has been sufficiently kicked, so this must be done before any AUX transactions are attempted. After extensive experimentation I've determined that it's sufficient to first write the port register with the correct values except the port must remain disabled, then we can do a second write to enable the port, after which the power sequencer is operational and allows the port to start up properly. Contrary to my earlier theories we don't need to enable the port with the idle pattern, so let's just use training pattern 1 as that's what other platforms use here. v2: Refine the kick procedure Signed-off-by: Ville Syrjälä Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index f3b6cd5057ea..823355705a5e 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -2517,14 +2517,23 @@ static void intel_dp_enable_port(struct intel_dp *intel_dp) struct drm_device *dev = intel_dp_to_dev(intel_dp); struct drm_i915_private *dev_priv = dev->dev_private; - intel_dp->DP |= DP_PORT_EN; - /* enable with pattern 1 (as per spec) */ _intel_dp_set_link_train(intel_dp, &intel_dp->DP, DP_TRAINING_PATTERN_1); I915_WRITE(intel_dp->output_reg, intel_dp->DP); POSTING_READ(intel_dp->output_reg); + + /* + * Magic for VLV/CHV. We _must_ first set up the register + * without actually enabling the port, and then do another + * write to enable the port. Otherwise link training will + * fail when the power sequencer is freshly used for this port. + */ + intel_dp->DP |= DP_PORT_EN; + + I915_WRITE(intel_dp->output_reg, intel_dp->DP); + POSTING_READ(intel_dp->output_reg); } static void intel_enable_dp(struct intel_encoder *encoder)