From: Somnath kotur Date: Mon, 3 Mar 2014 08:54:43 +0000 (+0530) Subject: be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7ad09458a5be9a0990457c1a198e702559ac25ca;p=openwrt%2Fstaging%2Fblogic.git be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode We should clear promiscuous bits in adapter->flags while disabling promiscuous mode. Else we will not put interface back into VLAN promisc mode if the vlans already added exceeds the maximum limit. Signed-off-by: Kalesh AP Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 45662af28928..9e6d678bca43 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1157,6 +1157,14 @@ ret: return status; } +static void be_clear_promisc(struct be_adapter *adapter) +{ + adapter->promiscuous = false; + adapter->flags &= ~BE_FLAGS_VLAN_PROMISC; + + be_cmd_rx_filter(adapter, IFF_PROMISC, OFF); +} + static void be_set_rx_mode(struct net_device *netdev) { struct be_adapter *adapter = netdev_priv(netdev); @@ -1170,9 +1178,7 @@ static void be_set_rx_mode(struct net_device *netdev) /* BE was previously in promiscuous mode; disable it */ if (adapter->promiscuous) { - adapter->promiscuous = false; - be_cmd_rx_filter(adapter, IFF_PROMISC, OFF); - + be_clear_promisc(adapter); if (adapter->vlans_added) be_vid_config(adapter); }