From: Hauke Mehrtens Date: Sat, 9 Nov 2013 19:27:27 +0000 (+0000) Subject: kernel: adm6996: add support for ADM6996L and GPIO interface X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7a82667372af7eb372133fd6bb0e3322c8c02df1;p=openwrt%2Fstaging%2Fstintel.git kernel: adm6996: add support for ADM6996L and GPIO interface This patch makes it possible to use adm6996.c on first generation BCM47XX devices with ADM switches. The GPIO bit banging protocol implementation was copied from the old switch driver and adapted to this driver and changed to the mainline kernel GPIO interface. The ADM6996L is different from the ADM6996M which is supported, for both specs are available in the Internet. This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for the device. Signed-off-by: Hauke Mehrtens SVN-Revision: 38698 --- diff --git a/target/linux/generic/files/drivers/net/phy/adm6996.c b/target/linux/generic/files/drivers/net/phy/adm6996.c index 347c12970e..ce48b528cc 100644 --- a/target/linux/generic/files/drivers/net/phy/adm6996.c +++ b/target/linux/generic/files/drivers/net/phy/adm6996.c @@ -5,12 +5,15 @@ * * Copyright (c) 2008 Felix Fietkau * VLAN support Copyright (c) 2010, 2011 Peter Lebbing + * Copyright (c) 2013 Hauke Mehrtens * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License v2 as published by the * Free Software Foundation */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + /*#define DEBUG 1*/ #include #include @@ -20,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -27,6 +31,8 @@ #include #include #include +#include +#include #include #include #include @@ -40,20 +46,22 @@ MODULE_DESCRIPTION("Infineon ADM6996 Switch"); MODULE_AUTHOR("Felix Fietkau, Peter Lebbing "); MODULE_LICENSE("GPL"); -enum adm6996_model { - ADM6996FC, - ADM6996M -}; - static const char * const adm6996_model_name[] = { + NULL, "ADM6996FC", - "ADM6996M" + "ADM6996M", + "ADM6996L" }; struct adm6996_priv { struct switch_dev dev; - struct phy_device *phydev; + void *priv; + + u8 eecs; + u8 eesk; + u8 eedi; + u8 eerc; enum adm6996_model model; @@ -65,6 +73,7 @@ struct adm6996_priv { #endif u16 pvid[ADM_NUM_PORTS]; /* Primary VLAN ID */ + u8 tagged_ports; u16 vlan_id[ADM_NUM_VLANS]; u8 vlan_table[ADM_NUM_VLANS]; /* bitmap, 1 = port is member */ @@ -73,36 +82,199 @@ struct adm6996_priv { struct mutex reg_mutex; /* use abstraction for regops, we want to add gpio support in the future */ - u16 (*read)(struct phy_device *phydev, enum admreg reg); - void (*write)(struct phy_device *phydev, enum admreg reg, u16 val); + u16 (*read)(struct adm6996_priv *priv, enum admreg reg); + void (*write)(struct adm6996_priv *priv, enum admreg reg, u16 val); }; #define to_adm(_dev) container_of(_dev, struct adm6996_priv, dev) #define phy_to_adm(_phy) ((struct adm6996_priv *) (_phy)->priv) static inline u16 -r16(struct phy_device *pdev, enum admreg reg) +r16(struct adm6996_priv *priv, enum admreg reg) { - return phy_to_adm(pdev)->read(pdev, reg); + return priv->read(priv, reg); } static inline void -w16(struct phy_device *pdev, enum admreg reg, u16 val) +w16(struct adm6996_priv *priv, enum admreg reg, u16 val) { - phy_to_adm(pdev)->write(pdev, reg, val); + priv->write(priv, reg, val); } +/* Minimum timing constants */ +#define EECK_EDGE_TIME 3 /* 3us - max(adm 2.5us, 93c 1us) */ +#define EEDI_SETUP_TIME 1 /* 1us - max(adm 10ns, 93c 400ns) */ +#define EECS_SETUP_TIME 1 /* 1us - max(adm no, 93c 200ns) */ + +static void adm6996_gpio_write(struct adm6996_priv *priv, int cs, char *buf, unsigned int bits) +{ + int i, len = (bits + 7) / 8; + u8 mask; + + gpio_set_value(priv->eecs, cs); + udelay(EECK_EDGE_TIME); + + /* Byte assemble from MSB to LSB */ + for (i = 0; i < len; i++) { + /* Bit bang from MSB to LSB */ + for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) { + /* Clock low */ + gpio_set_value(priv->eesk, 0); + udelay(EECK_EDGE_TIME); + + /* Output on rising edge */ + gpio_set_value(priv->eedi, (mask & buf[i])); + udelay(EEDI_SETUP_TIME); + + /* Clock high */ + gpio_set_value(priv->eesk, 1); + udelay(EECK_EDGE_TIME); + } + } + + /* Clock low */ + gpio_set_value(priv->eesk, 0); + udelay(EECK_EDGE_TIME); + + if (cs) + gpio_set_value(priv->eecs, 0); +} + +static void adm6996_gpio_read(struct adm6996_priv *priv, int cs, char *buf, unsigned int bits) +{ + int i, len = (bits + 7) / 8; + u8 mask; + + gpio_set_value(priv->eecs, cs); + udelay(EECK_EDGE_TIME); + + /* Byte assemble from MSB to LSB */ + for (i = 0; i < len; i++) { + u8 byte; + + /* Bit bang from MSB to LSB */ + for (mask = 0x80, byte = 0; mask && bits > 0; mask >>= 1, bits --) { + u8 gp; + + /* Clock low */ + gpio_set_value(priv->eesk, 0); + udelay(EECK_EDGE_TIME); + + /* Input on rising edge */ + gp = gpio_get_value(priv->eedi); + if (gp) + byte |= mask; + + /* Clock high */ + gpio_set_value(priv->eesk, 1); + udelay(EECK_EDGE_TIME); + } + + *buf++ = byte; + } + + /* Clock low */ + gpio_set_value(priv->eesk, 0); + udelay(EECK_EDGE_TIME); + + if (cs) + gpio_set_value(priv->eecs, 0); +} + +/* Advance clock(s) */ +static void adm6996_gpio_adclk(struct adm6996_priv *priv, int clocks) +{ + int i; + for (i = 0; i < clocks; i++) { + /* Clock high */ + gpio_set_value(priv->eesk, 1); + udelay(EECK_EDGE_TIME); + + /* Clock low */ + gpio_set_value(priv->eesk, 0); + udelay(EECK_EDGE_TIME); + } +} + +static u16 +adm6996_read_gpio_reg(struct adm6996_priv *priv, enum admreg reg) +{ + /* cmd: 01 10 T DD R RRRRRR */ + u8 bits[6] = { + 0xFF, 0xFF, 0xFF, 0xFF, + (0x06 << 4) | ((0 & 0x01) << 3 | (reg&64)>>6), + ((reg&63)<<2) + }; + + u8 rbits[4]; + + /* Enable GPIO outputs with all pins to 0 */ + gpio_direction_output(priv->eecs, 0); + gpio_direction_output(priv->eesk, 0); + gpio_direction_output(priv->eedi, 0); + + adm6996_gpio_write(priv, 0, bits, 46); + gpio_direction_input(priv->eedi); + adm6996_gpio_adclk(priv, 2); + adm6996_gpio_read(priv, 0, rbits, 32); + + /* Extra clock(s) required per datasheet */ + adm6996_gpio_adclk(priv, 2); + + /* Disable GPIO outputs */ + gpio_direction_input(priv->eecs); + gpio_direction_input(priv->eesk); + + /* EEPROM has 16-bit registers, but pumps out two registers in one request */ + return (reg & 0x01 ? (rbits[0]<<8) | rbits[1] : (rbits[2]<<8) | (rbits[3])); +} + +/* Write chip configuration register */ +/* Follow 93c66 timing and chip's min EEPROM timing requirement */ +static void +adm6996_write_gpio_reg(struct adm6996_priv *priv, enum admreg reg, u16 val) +{ + /* cmd(27bits): sb(1) + opc(01) + addr(bbbbbbbb) + data(bbbbbbbbbbbbbbbb) */ + u8 bits[4] = { + (0x05 << 5) | (reg >> 3), + (reg << 5) | (u8)(val >> 11), + (u8)(val >> 3), + (u8)(val << 5) + }; + + /* Enable GPIO outputs with all pins to 0 */ + gpio_direction_output(priv->eecs, 0); + gpio_direction_output(priv->eesk, 0); + gpio_direction_output(priv->eedi, 0); + + /* Write cmd. Total 27 bits */ + adm6996_gpio_write(priv, 1, bits, 27); + + /* Extra clock(s) required per datasheet */ + adm6996_gpio_adclk(priv, 2); + + /* Disable GPIO outputs */ + gpio_direction_input(priv->eecs); + gpio_direction_input(priv->eesk); + gpio_direction_input(priv->eedi); +} static u16 -adm6996_read_mii_reg(struct phy_device *phydev, enum admreg reg) +adm6996_read_mii_reg(struct adm6996_priv *priv, enum admreg reg) { - return phydev->bus->read(phydev->bus, PHYADDR(reg)); + struct phy_device *phydev = priv->priv; + struct mii_bus *bus = phydev->bus; + + return bus->read(bus, PHYADDR(reg)); } static void -adm6996_write_mii_reg(struct phy_device *phydev, enum admreg reg, u16 val) +adm6996_write_mii_reg(struct adm6996_priv *priv, enum admreg reg, u16 val) { - phydev->bus->write(phydev->bus, PHYADDR(reg), val); + struct phy_device *phydev = priv->priv; + struct mii_bus *bus = phydev->bus; + + bus->write(bus, PHYADDR(reg), val); } static int @@ -166,7 +338,7 @@ adm6996_set_data(struct switch_dev *dev, const struct switch_attr *attr, if (val->value.i > 65535) return -EINVAL; - w16(priv->phydev, priv->addr, val->value.i); + w16(priv, priv->addr, val->value.i); return 0; }; @@ -177,7 +349,7 @@ adm6996_get_data(struct switch_dev *dev, const struct switch_attr *attr, { struct adm6996_priv *priv = to_adm(dev); - val->value.i = r16(priv->phydev, priv->addr); + val->value.i = r16(priv, priv->addr); return 0; }; @@ -189,8 +361,7 @@ adm6996_set_pvid(struct switch_dev *dev, int port, int vlan) { struct adm6996_priv *priv = to_adm(dev); - dev_dbg (&priv->phydev->dev, "set_pvid port %d vlan %d\n", port - , vlan); + pr_devel("set_pvid port %d vlan %d\n", port, vlan); if (vlan > ADM_VLAN_MAX_ID) return -EINVAL; @@ -205,7 +376,7 @@ adm6996_get_pvid(struct switch_dev *dev, int port, int *vlan) { struct adm6996_priv *priv = to_adm(dev); - dev_dbg (&priv->phydev->dev, "get_pvid port %d\n", port); + pr_devel("get_pvid port %d\n", port); *vlan = priv->pvid[port]; return 0; @@ -217,8 +388,7 @@ adm6996_set_vid(struct switch_dev *dev, const struct switch_attr *attr, { struct adm6996_priv *priv = to_adm(dev); - dev_dbg (&priv->phydev->dev, "set_vid port %d vid %d\n", val->port_vlan, - val->value.i); + pr_devel("set_vid port %d vid %d\n", val->port_vlan, val->value.i); if (val->value.i > ADM_VLAN_MAX_ID) return -EINVAL; @@ -234,7 +404,7 @@ adm6996_get_vid(struct switch_dev *dev, const struct switch_attr *attr, { struct adm6996_priv *priv = to_adm(dev); - dev_dbg (&priv->phydev->dev, "get_vid port %d\n", val->port_vlan); + pr_devel("get_vid port %d\n", val->port_vlan); val->value.i = priv->vlan_id[val->port_vlan]; @@ -249,8 +419,7 @@ adm6996_get_ports(struct switch_dev *dev, struct switch_val *val) u8 tagged = priv->vlan_tagged[val->port_vlan]; int i; - dev_dbg (&priv->phydev->dev, "get_ports port_vlan %d\n", - val->port_vlan); + pr_devel("get_ports port_vlan %d\n", val->port_vlan); val->len = 0; @@ -279,8 +448,7 @@ adm6996_set_ports(struct switch_dev *dev, struct switch_val *val) u8 *tagged = &priv->vlan_tagged[val->port_vlan]; int i; - dev_dbg (&priv->phydev->dev, "set_ports port_vlan %d ports", - val->port_vlan); + pr_devel("set_ports port_vlan %d ports", val->port_vlan); *ports = 0; *tagged = 0; @@ -294,8 +462,10 @@ adm6996_set_ports(struct switch_dev *dev, struct switch_val *val) "")); #endif - if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) + if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) { *tagged |= (1 << p->id); + priv->tagged_ports |= (1 << p->id); + } *ports |= (1 << p->id); } @@ -315,24 +485,34 @@ adm6996_enable_vlan(struct adm6996_priv *priv) { u16 reg; - reg = r16(priv->phydev, ADM_OTBE_P2_PVID); + reg = r16(priv, ADM_OTBE_P2_PVID); reg &= ~(ADM_OTBE_MASK); - w16(priv->phydev, ADM_OTBE_P2_PVID, reg); - reg = r16(priv->phydev, ADM_IFNTE); + w16(priv, ADM_OTBE_P2_PVID, reg); + reg = r16(priv, ADM_IFNTE); reg &= ~(ADM_IFNTE_MASK); - w16(priv->phydev, ADM_IFNTE, reg); - reg = r16(priv->phydev, ADM_VID_CHECK); + w16(priv, ADM_IFNTE, reg); + reg = r16(priv, ADM_VID_CHECK); reg |= ADM_VID_CHECK_MASK; - w16(priv->phydev, ADM_VID_CHECK, reg); - reg = r16(priv->phydev, ADM_SYSC0); + w16(priv, ADM_VID_CHECK, reg); + reg = r16(priv, ADM_SYSC0); reg |= ADM_NTTE; reg &= ~(ADM_RVID1); - w16(priv->phydev, ADM_SYSC0, reg); - reg = r16(priv->phydev, ADM_SYSC3); + w16(priv, ADM_SYSC0, reg); + reg = r16(priv, ADM_SYSC3); reg |= ADM_TBV; - w16(priv->phydev, ADM_SYSC3, reg); + w16(priv, ADM_SYSC3, reg); +} -}; +static void +adm6996_enable_vlan_6996l(struct adm6996_priv *priv) +{ + u16 reg; + + reg = r16(priv, ADM_SYSC3); + reg |= ADM_TBV; + reg |= ADM_MAC_CLONE; + w16(priv, ADM_SYSC3, reg); +} /* * Disable VLANs @@ -348,29 +528,53 @@ adm6996_disable_vlan(struct adm6996_priv *priv) u16 reg; int i; - for (i = 0; i < ADM_NUM_PORTS; i++) { + for (i = 0; i < ADM_NUM_VLANS; i++) { reg = ADM_VLAN_FILT_MEMBER_MASK; - w16(priv->phydev, ADM_VLAN_FILT_L(i), reg); + w16(priv, ADM_VLAN_FILT_L(i), reg); reg = ADM_VLAN_FILT_VALID | ADM_VLAN_FILT_VID(1); - w16(priv->phydev, ADM_VLAN_FILT_H(i), reg); + w16(priv, ADM_VLAN_FILT_H(i), reg); } - reg = r16(priv->phydev, ADM_OTBE_P2_PVID); + reg = r16(priv, ADM_OTBE_P2_PVID); reg |= ADM_OTBE_MASK; - w16(priv->phydev, ADM_OTBE_P2_PVID, reg); - reg = r16(priv->phydev, ADM_IFNTE); + w16(priv, ADM_OTBE_P2_PVID, reg); + reg = r16(priv, ADM_IFNTE); reg |= ADM_IFNTE_MASK; - w16(priv->phydev, ADM_IFNTE, reg); - reg = r16(priv->phydev, ADM_VID_CHECK); + w16(priv, ADM_IFNTE, reg); + reg = r16(priv, ADM_VID_CHECK); reg &= ~(ADM_VID_CHECK_MASK); - w16(priv->phydev, ADM_VID_CHECK, reg); - reg = r16(priv->phydev, ADM_SYSC0); + w16(priv, ADM_VID_CHECK, reg); + reg = r16(priv, ADM_SYSC0); reg &= ~(ADM_NTTE); reg |= ADM_RVID1; - w16(priv->phydev, ADM_SYSC0, reg); - reg = r16(priv->phydev, ADM_SYSC3); + w16(priv, ADM_SYSC0, reg); + reg = r16(priv, ADM_SYSC3); reg &= ~(ADM_TBV); - w16(priv->phydev, ADM_SYSC3, reg); + w16(priv, ADM_SYSC3, reg); +} + +/* + * Disable VLANs + * + * Sets VLAN mapping for port-based VLAN with all ports connected to + * eachother (this is also the power-on default). + * + * Precondition: reg_mutex must be held + */ +static void +adm6996_disable_vlan_6996l(struct adm6996_priv *priv) +{ + u16 reg; + int i; + + for (i = 0; i < ADM_NUM_VLANS; i++) { + w16(priv, ADM_VLAN_MAP(i), 0); + } + + reg = r16(priv, ADM_SYSC3); + reg &= ~(ADM_TBV); + reg &= ~(ADM_MAC_CLONE); + w16(priv, ADM_SYSC3, reg); } /* @@ -383,22 +587,31 @@ adm6996_apply_port_pvids(struct adm6996_priv *priv) int i; for (i = 0; i < ADM_NUM_PORTS; i++) { - reg = r16(priv->phydev, adm_portcfg[i]); + reg = r16(priv, adm_portcfg[i]); reg &= ~(ADM_PORTCFG_PVID_MASK); reg |= ADM_PORTCFG_PVID(priv->pvid[i]); - w16(priv->phydev, adm_portcfg[i], reg); + if (priv->model == ADM6996L) { + if (priv->tagged_ports & (1 << i)) + reg |= (1 << 4); + else + reg &= ~(1 << 4); + } + w16(priv, adm_portcfg[i], reg); } - w16(priv->phydev, ADM_P0_PVID, ADM_P0_PVID_VAL(priv->pvid[0])); - w16(priv->phydev, ADM_P1_PVID, ADM_P1_PVID_VAL(priv->pvid[1])); - reg = r16(priv->phydev, ADM_OTBE_P2_PVID); + w16(priv, ADM_P0_PVID, ADM_P0_PVID_VAL(priv->pvid[0])); + w16(priv, ADM_P1_PVID, ADM_P1_PVID_VAL(priv->pvid[1])); + reg = r16(priv, ADM_OTBE_P2_PVID); reg &= ~(ADM_P2_PVID_MASK); reg |= ADM_P2_PVID_VAL(priv->pvid[2]); - w16(priv->phydev, ADM_OTBE_P2_PVID, reg); + w16(priv, ADM_OTBE_P2_PVID, reg); reg = ADM_P3_PVID_VAL(priv->pvid[3]); reg |= ADM_P4_PVID_VAL(priv->pvid[4]); - w16(priv->phydev, ADM_P3_P4_PVID, reg); - w16(priv->phydev, ADM_P5_PVID, ADM_P5_PVID_VAL(priv->pvid[5])); + w16(priv, ADM_P3_P4_PVID, reg); + reg = r16(priv, ADM_P5_PVID); + reg &= ~(ADM_P2_PVID_MASK); + reg |= ADM_P5_PVID_VAL(priv->pvid[5]); + w16(priv, ADM_P5_PVID, reg); } /* @@ -418,16 +631,37 @@ adm6996_apply_vlan_filters(struct adm6996_priv *priv) if (ports == 0) { /* Disable VLAN entry */ - w16(priv->phydev, ADM_VLAN_FILT_H(i), 0); - w16(priv->phydev, ADM_VLAN_FILT_L(i), 0); + w16(priv, ADM_VLAN_FILT_H(i), 0); + w16(priv, ADM_VLAN_FILT_L(i), 0); continue; } reg = ADM_VLAN_FILT_MEMBER(ports); reg |= ADM_VLAN_FILT_TAGGED(tagged); - w16(priv->phydev, ADM_VLAN_FILT_L(i), reg); + w16(priv, ADM_VLAN_FILT_L(i), reg); reg = ADM_VLAN_FILT_VALID | ADM_VLAN_FILT_VID(vid); - w16(priv->phydev, ADM_VLAN_FILT_H(i), reg); + w16(priv, ADM_VLAN_FILT_H(i), reg); + } +} + +static void +adm6996_apply_vlan_filters_6996l(struct adm6996_priv *priv) +{ + u8 ports; + u16 reg; + int i; + + for (i = 0; i < ADM_NUM_VLANS; i++) { + ports = priv->vlan_table[i]; + + if (ports == 0) { + /* Disable VLAN entry */ + w16(priv, ADM_VLAN_MAP(i), 0); + continue; + } else { + reg = ADM_VLAN_FILT(ports); + w16(priv, ADM_VLAN_MAP(i), reg); + } } } @@ -436,25 +670,34 @@ adm6996_hw_apply(struct switch_dev *dev) { struct adm6996_priv *priv = to_adm(dev); - dev_dbg(&priv->phydev->dev, "hw_apply\n"); + pr_devel("hw_apply\n"); mutex_lock(&priv->reg_mutex); if (!priv->enable_vlan) { if (priv->vlan_enabled) { - adm6996_disable_vlan(priv); + if (priv->model == ADM6996L) + adm6996_disable_vlan_6996l(priv); + else + adm6996_disable_vlan(priv); priv->vlan_enabled = 0; } goto out; } if (!priv->vlan_enabled) { - adm6996_enable_vlan(priv); + if (priv->model == ADM6996L) + adm6996_enable_vlan_6996l(priv); + else + adm6996_enable_vlan(priv); priv->vlan_enabled = 1; } adm6996_apply_port_pvids(priv); - adm6996_apply_vlan_filters(priv); + if (priv->model == ADM6996L) + adm6996_apply_vlan_filters_6996l(priv); + else + adm6996_apply_vlan_filters(priv); out: mutex_unlock(&priv->reg_mutex); @@ -477,14 +720,16 @@ adm6996_perform_reset (struct adm6996_priv *priv) /* initialize port and vlan settings */ for (i = 0; i < ADM_NUM_PORTS - 1; i++) { - w16(priv->phydev, adm_portcfg[i], ADM_PORTCFG_INIT | + w16(priv, adm_portcfg[i], ADM_PORTCFG_INIT | ADM_PORTCFG_PVID(0)); } - w16(priv->phydev, adm_portcfg[5], ADM_PORTCFG_CPU); + w16(priv, adm_portcfg[5], ADM_PORTCFG_CPU); - /* reset all PHY ports */ - for (i = 0; i < ADM_PHY_PORTS; i++) { - w16(priv->phydev, ADM_PHY_PORT(i), ADM_PHYCFG_INIT); + if (priv->model == ADM6996M || priv->model == ADM6996FC) { + /* reset all PHY ports */ + for (i = 0; i < ADM_PHY_PORTS; i++) { + w16(priv, ADM_PHY_PORT(i), ADM_PHYCFG_INIT); + } } priv->enable_vlan = 0; @@ -502,10 +747,16 @@ adm6996_perform_reset (struct adm6996_priv *priv) if (priv->model == ADM6996M) { /* Clear VLAN priority map so prio's are unused */ - w16 (priv->phydev, ADM_VLAN_PRIOMAP, 0); + w16 (priv, ADM_VLAN_PRIOMAP, 0); adm6996_disable_vlan(priv); adm6996_apply_port_pvids(priv); + } else if (priv->model == ADM6996L) { + /* Clear VLAN priority map so prio's are unused */ + w16 (priv, ADM_VLAN_PRIOMAP, 0); + + adm6996_disable_vlan_6996l(priv); + adm6996_apply_port_pvids(priv); } } @@ -514,7 +765,8 @@ adm6996_reset_switch(struct switch_dev *dev) { struct adm6996_priv *priv = to_adm(dev); - dev_dbg (&priv->phydev->dev, "reset\n"); + pr_devel("reset\n"); + mutex_lock(&priv->reg_mutex); adm6996_perform_reset (priv); mutex_unlock(&priv->reg_mutex); @@ -583,13 +835,55 @@ static const struct switch_dev_ops adm6996_ops = { .reset_switch = adm6996_reset_switch, }; -static int adm6996_config_init(struct phy_device *pdev) +static int adm6996_switch_init(struct adm6996_priv *priv, const char *alias, struct net_device *netdev) { - struct adm6996_priv *priv; struct switch_dev *swdev; + u16 test, old; + + if (!priv->model) { + /* Detect type of chip */ + old = r16(priv, ADM_VID_CHECK); + test = old ^ (1 << 12); + w16(priv, ADM_VID_CHECK, test); + test ^= r16(priv, ADM_VID_CHECK); + if (test & (1 << 12)) { + /* + * Bit 12 of this register is read-only. + * This is the FC model. + */ + priv->model = ADM6996FC; + } else { + /* Bit 12 is read-write. This is the M model. */ + priv->model = ADM6996M; + w16(priv, ADM_VID_CHECK, old); + } + } + swdev = &priv->dev; + swdev->name = (adm6996_model_name[priv->model]); + swdev->cpu_port = ADM_CPU_PORT; + swdev->ports = ADM_NUM_PORTS; + swdev->vlans = ADM_NUM_VLANS; + swdev->ops = &adm6996_ops; + swdev->alias = alias; + + pr_info ("%s: %s model PHY found.\n", alias, swdev->name); + + mutex_lock(&priv->reg_mutex); + adm6996_perform_reset (priv); + mutex_unlock(&priv->reg_mutex); + + if (priv->model == ADM6996M || priv->model == ADM6996L) { + return register_switch(swdev, netdev); + } + + return -ENODEV; +} + +static int adm6996_config_init(struct phy_device *pdev) +{ + struct adm6996_priv *priv; int ret; - u16 test, old; pdev->supported = ADVERTISED_100baseT_Full; pdev->advertising = ADVERTISED_100baseT_Full; @@ -600,53 +894,20 @@ static int adm6996_config_init(struct phy_device *pdev) return 0; } - priv = kzalloc(sizeof(struct adm6996_priv), GFP_KERNEL); - if (priv == NULL) + priv = devm_kzalloc(&pdev->dev, sizeof(struct adm6996_priv), GFP_KERNEL); + if (!priv) return -ENOMEM; mutex_init(&priv->reg_mutex); - priv->phydev = pdev; + priv->priv = pdev; priv->read = adm6996_read_mii_reg; priv->write = adm6996_write_mii_reg; - pdev->priv = priv; - - /* Detect type of chip */ - old = r16(pdev, ADM_VID_CHECK); - test = old ^ (1 << 12); - w16(pdev, ADM_VID_CHECK, test); - test ^= r16(pdev, ADM_VID_CHECK); - if (test & (1 << 12)) { - /* - * Bit 12 of this register is read-only. - * This is the FC model. - */ - priv->model = ADM6996FC; - } else { - /* Bit 12 is read-write. This is the M model. */ - priv->model = ADM6996M; - w16(pdev, ADM_VID_CHECK, old); - } - - swdev = &priv->dev; - swdev->name = (adm6996_model_name[priv->model]); - swdev->cpu_port = ADM_CPU_PORT; - swdev->ports = ADM_NUM_PORTS; - swdev->vlans = ADM_NUM_VLANS; - swdev->ops = &adm6996_ops; - pr_info ("%s: %s model PHY found.\n", pdev->attached_dev->name, - swdev->name); + ret = adm6996_switch_init(priv, pdev->attached_dev->name, pdev->attached_dev); + if (ret < 0) + return ret; - mutex_lock(&priv->reg_mutex); - adm6996_perform_reset (priv); - mutex_unlock(&priv->reg_mutex); - - if (priv->model == ADM6996M) { - if ((ret = register_switch(swdev, pdev->attached_dev)) < 0) { - kfree(priv); - return ret; - } - } + pdev->priv = priv; return 0; } @@ -702,14 +963,12 @@ static void adm6996_remove(struct phy_device *pdev) { struct adm6996_priv *priv = phy_to_adm(pdev); - if (priv != NULL && priv->model == ADM6996M) + if (priv && (priv->model == ADM6996M || priv->model == ADM6996L)) unregister_switch(&priv->dev); - - kfree(priv); } -static struct phy_driver adm6996_driver = { +static struct phy_driver adm6996_phy_driver = { .name = "Infineon ADM6996", .phy_id = (ADM_SIG0_VAL << 16) | ADM_SIG1_VAL, .phy_id_mask = 0xffffffff, @@ -722,15 +981,90 @@ static struct phy_driver adm6996_driver = { .driver = { .owner = THIS_MODULE,}, }; +static int adm6996_gpio_probe(struct platform_device *pdev) +{ + struct adm6996_gpio_platform_data *pdata = pdev->dev.platform_data; + struct adm6996_priv *priv; + int ret; + + if (!pdata) + return -EINVAL; + + priv = devm_kzalloc(&pdev->dev, sizeof(struct adm6996_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->reg_mutex); + + priv->eecs = pdata->eecs; + priv->eedi = pdata->eedi; + priv->eerc = pdata->eerc; + priv->eesk = pdata->eesk; + + priv->model = pdata->model; + priv->read = adm6996_read_gpio_reg; + priv->write = adm6996_write_gpio_reg; + + ret = devm_gpio_request(&pdev->dev, priv->eecs, "adm_eecs"); + if (ret) + return ret; + ret = devm_gpio_request(&pdev->dev, priv->eedi, "adm_eedi"); + if (ret) + return ret; + ret = devm_gpio_request(&pdev->dev, priv->eerc, "adm_eerc"); + if (ret) + return ret; + ret = devm_gpio_request(&pdev->dev, priv->eesk, "adm_eesk"); + if (ret) + return ret; + + ret = adm6996_switch_init(priv, dev_name(&pdev->dev), NULL); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, priv); + + return 0; +} + +static int adm6996_gpio_remove(struct platform_device *pdev) +{ + struct adm6996_priv *priv = platform_get_drvdata(pdev); + + if (priv && (priv->model == ADM6996M || priv->model == ADM6996L)) + unregister_switch(&priv->dev); + + return 0; +} + +static struct platform_driver adm6996_gpio_driver = { + .probe = adm6996_gpio_probe, + .remove = adm6996_gpio_remove, + .driver = { + .name = "adm6996_gpio", + }, +}; + static int __init adm6996_init(void) { + int err; + phy_register_fixup_for_id(PHY_ANY_ID, adm6996_fixup); - return phy_driver_register(&adm6996_driver); + err = phy_driver_register(&adm6996_phy_driver); + if (err) + return err; + + err = platform_driver_register(&adm6996_gpio_driver); + if (err) + phy_driver_unregister(&adm6996_phy_driver); + + return err; } static void __exit adm6996_exit(void) { - phy_driver_unregister(&adm6996_driver); + platform_driver_unregister(&adm6996_gpio_driver); + phy_driver_unregister(&adm6996_phy_driver); } module_init(adm6996_init); diff --git a/target/linux/generic/files/drivers/net/phy/adm6996.h b/target/linux/generic/files/drivers/net/phy/adm6996.h index 6922dfcbbd..b30eceafdd 100644 --- a/target/linux/generic/files/drivers/net/phy/adm6996.h +++ b/target/linux/generic/files/drivers/net/phy/adm6996.h @@ -46,6 +46,7 @@ enum admreg { ADM_EEPROM_EXT_BASE = 0x40, #define ADM_VLAN_FILT_L(n) (ADM_EEPROM_EXT_BASE + 2 * (n)) #define ADM_VLAN_FILT_H(n) (ADM_EEPROM_EXT_BASE + 1 + 2 * (n)) +#define ADM_VLAN_MAP(n) (ADM_EEPROM_BASE + 0x13 + n) ADM_COUNTER_BASE = 0xa0, ADM_SIG0 = ADM_COUNTER_BASE + 0, ADM_SIG1 = ADM_COUNTER_BASE + 1, @@ -132,7 +133,8 @@ enum { }; /* Tag Based VLAN in ADM_SYSC3 */ -#define ADM_TBV (1 << 5) +#define ADM_MAC_CLONE BIT(4) +#define ADM_TBV BIT(5) static const u8 adm_portcfg[] = { [0] = ADM_P0_CFG, @@ -152,6 +154,10 @@ static const u8 adm_portcfg[] = { #define ADM_VLAN_FILT_VALID (1 << 15) #define ADM_VLAN_FILT_VID(n) (((n) & 0xfff) << 0) +/* Convert ports to a form for ADM6996L VLAN map */ +#define ADM_VLAN_FILT(ports) ((ports & 0x01) | ((ports & 0x02) << 1) | \ + ((ports & 0x04) << 2) | ((ports & 0x08) << 3) | \ + ((ports & 0x10) << 3) | ((ports & 0x20) << 3)) /* * Split the register address in phy id and register diff --git a/target/linux/generic/files/include/linux/platform_data/adm6996-gpio.h b/target/linux/generic/files/include/linux/platform_data/adm6996-gpio.h new file mode 100644 index 0000000000..e4fcfafa74 --- /dev/null +++ b/target/linux/generic/files/include/linux/platform_data/adm6996-gpio.h @@ -0,0 +1,30 @@ +/* + * ADM6996 GPIO platform data + * + * Copyright (C) 2013 Hauke Mehrtens + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation + */ + +#ifndef __PLATFORM_ADM6996_GPIO_H +#define __PLATFORM_ADM6996_GPIO_H + +#include + +enum adm6996_model { + ADM6996FC = 1, + ADM6996M = 2, + ADM6996L = 3, +}; + +struct adm6996_gpio_platform_data { + u8 eecs; + u8 eesk; + u8 eedi; + u8 eerc; + enum adm6996_model model; +}; + +#endif