From: Pawel Dembicki Date: Mon, 2 Mar 2020 20:24:03 +0000 (+0100) Subject: kirkwood: copy files and config from 4.19 to 5.4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7a3a99c8a6efe8a473103e22d0bb60037ded1321;p=openwrt%2Fstaging%2Fblocktrron.git kirkwood: copy files and config from 4.19 to 5.4 This commit is simple copy config, files and patches from 4.19 to 5.4 kernel. No changes was done. Signed-off-by: Pawel Dembicki --- diff --git a/target/linux/kirkwood/config-5.4 b/target/linux/kirkwood/config-5.4 new file mode 100644 index 0000000000..d7ea9e9eef --- /dev/null +++ b/target/linux/kirkwood/config-5.4 @@ -0,0 +1,344 @@ +CONFIG_ALIGNMENT_TRAP=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_ARCH_HAS_KCOV=y +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_ARCH_HAS_PHYS_TO_DMA=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +CONFIG_ARCH_MULTI_CPU_AUTO=y +# CONFIG_ARCH_MULTI_V4 is not set +# CONFIG_ARCH_MULTI_V4T is not set +CONFIG_ARCH_MULTI_V4_V5=y +CONFIG_ARCH_MULTI_V5=y +CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_LIBATA_LEDS=y +CONFIG_ARM=y +# CONFIG_ARMADA_THERMAL is not set +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y +CONFIG_ARM_HAS_SG_CHAIN=y +# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set +CONFIG_ARM_PATCH_PHYS_VIRT=y +# CONFIG_ARM_THUMB is not set +CONFIG_ATA=y +CONFIG_ATAGS=y +CONFIG_ATA_LEDS=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_CACHE_FEROCEON_L2=y +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_FEROCEON=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FEROCEON=y +# CONFIG_CPU_FEROCEON_OLD_ID is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_PM=y +CONFIG_CPU_THUMB_CAPABLE=y +CONFIG_CPU_TLB_FEROCEON=y +CONFIG_CPU_USE_DOMAINS=y +CONFIG_CRC16=y +# CONFIG_CRC32_SARWATE is not set +CONFIG_CRC32_SLICEBY8=y +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_DEV_MARVELL_CESA=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" +CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y +# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set +CONFIG_DEBUG_UART_8250=y +# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set +CONFIG_DEBUG_UART_8250_SHIFT=2 +# CONFIG_DEBUG_UART_8250_WORD is not set +CONFIG_DEBUG_UART_PHYS=0xf1012000 +CONFIG_DEBUG_UART_VIRT=0xfed12000 +CONFIG_DEBUG_UNCOMPRESS=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DLCI is not set +CONFIG_DNOTIFY=y +CONFIG_DTC=y +# CONFIG_EARLY_PRINTK is not set +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_EXT4_FS=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FRAME_POINTER=y +CONFIG_FS_IOMAP=y +CONFIG_FS_MBCACHE=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GLOB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_MVEBU=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_OMAP=y +CONFIG_HZ_FIXED=0 +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_PXA is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_JBD2=y +CONFIG_KIRKWOOD_CLK=y +CONFIG_KIRKWOOD_THERMAL=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_NETXBIG=y +CONFIG_LEDS_NS2=y +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MACH_KIRKWOOD=y +CONFIG_MACH_MVEBU_ANY=y +CONFIG_MANGLE_BOOTARGS=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MEMFD_CREATE=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MIGRATION=y +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_MVSDIO=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_CFI is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +# CONFIG_MTD_NAND_MARVELL is not set +CONFIG_MTD_NAND_ORION=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MV643XX_ETH=y +CONFIG_MVEBU_CLK_COMMON=y +CONFIG_MVEBU_MBUS=y +CONFIG_MVMDIO=y +# CONFIG_MVNETA is not set +# CONFIG_MVPP2 is not set +CONFIG_MVSW61XX_PHY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_KUSER_HELPERS=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NLS=y +CONFIG_NO_BOOTMEM=y +CONFIG_NVMEM=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_ORION_IRQCHIP=y +CONFIG_ORION_TIMER=y +CONFIG_ORION_WATCHDOG=y +CONFIG_OUTER_CACHE=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_MVEBU=y +# CONFIG_PCI_V3_SEMI is not set +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +# CONFIG_PHY_MVEBU_CP110_COMPHY is not set +CONFIG_PHY_MVEBU_SATA=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_KIRKWOOD=y +CONFIG_PINCTRL_MVEBU=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PLAT_ORION=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y +# CONFIG_POWER_RESET_QNAP is not set +CONFIG_POWER_SUPPLY=y +CONFIG_RATIONAL=y +CONFIG_REFCOUNT_FULL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MV=y +CONFIG_RTC_I2C_AND_SPI=y +CONFIG_RTC_MC146818_LIB=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SATA_MV=y +CONFIG_SATA_PMP=y +CONFIG_SCSI=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_FSL=y +# CONFIG_SERIAL_MVEBU_UART is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SGL_ALLOC=y +CONFIG_SG_POOL=y +CONFIG_SOC_BUS=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +# CONFIG_SPI_ARMADA_3700 is not set +CONFIG_SPI_MASTER=y +CONFIG_SPI_ORION=y +CONFIG_SPLIT_PTLOCK_CPUS=999999 +CONFIG_SRAM=y +CONFIG_SRAM_EXEC=y +CONFIG_SRCU=y +CONFIG_SWCONFIG=y +CONFIG_SWPHY=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_THERMAL=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_OF=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TINY_SRCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_ORION=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +CONFIG_USB_LED_TRIG=y +# CONFIG_USB_ROLE_SWITCH is not set +CONFIG_USB_STORAGE=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +# CONFIG_VFP is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_WAN=y +CONFIG_WATCHDOG_CORE=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-goflexhome.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-goflexhome.dts new file mode 100644 index 0000000000..b0b69b46cd --- /dev/null +++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-goflexhome.dts @@ -0,0 +1,135 @@ +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Seagate GoFlex Home"; + compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + aliases { + led-boot = &led_health; + led-failsafe = &led_fault; + led-running = &led_health; + led-upgrade = &led_fault; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_white: pmx-led-white { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_green: pmx-led_green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_led_orange: pmx-led-orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_health: health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led_fault: fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + misc { + label = "status:white:misc"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + }; + + regulators { + compatible = "simple-bus"; + + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + status = "okay"; + + chip-delay = <40>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + + partition@100000 { + label = "ubi"; + reg = <0x0100000 0xff00000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts new file mode 100644 index 0000000000..eff9102d33 --- /dev/null +++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500 + * + * (c) 2013 Jonas Gorski + * (c) 2013 Deutsche Telekom Innovation Laboratories + * (c) 2014 Luka Perkov + * (c) 2014 Dan Walters + * + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "Linksys Audi (EA3500)"; + compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>; + pinctrl-names = "default"; + + wps { + label = "WPS Button"; + linux,code = ; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&pmx_led_green_power>; + pinctrl-names = "default"; + + led_power: power { + label = "audi:green:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + mvsw61xx { + compatible = "marvell,88e6171"; + status = "okay"; + reg = <0x10>; + + mii-bus = <&mdio>; + cpu-port-0 = <5>; + cpu-port-1 = <6>; + is-indirect; + }; +}; + +&pinctrl { + pmx_led_green_power: pmx-led-green-power { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + + pmx_btn_wps: pmx-btn-wps { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; +}; + +&nand { + status = "okay"; + + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u_env"; + reg = <0x80000 0x4000>; + }; + + partition@84000 { + label = "s_env"; + reg = <0x84000 0x4000>; + }; + + partition@200000 { + label = "kernel1"; + reg = <0x200000 0x290000>; + }; + + partition@490000 { + label = "rootfs1"; + reg = <0x490000 0x1170000>; + }; + + partition@1600000 { + label = "kernel2"; + reg = <0x1600000 0x290000>; + }; + + partition@1890000 { + label = "rootfs2"; + reg = <0x1890000 0x1170000>; + }; + + partition@2a00000 { + label = "syscfg"; + reg = <0x2a00000 0x1600000>; + }; + + partition@88000 { + label = "unused"; + reg = <0x88000 0x178000>; + }; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set + * fixed speed and duplex. + */ +ð0 { + status = "okay"; + + ethernet0-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +/* eth1 is connected to the switch at port 6. However DSA only supports a + * single CPU port. Upstream uses DSA so they disable this port to avoid confusion. + */ +ð1 { + status = "okay"; + + ethernet1-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +/* There is no battery on the board, so the RTC does not keep + * time when there is no power, making it useless. + */ +&rtc { + status = "disabled"; +}; diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-nsa310b.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-nsa310b.dts new file mode 100644 index 0000000000..10b119eb01 --- /dev/null +++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-nsa310b.dts @@ -0,0 +1,141 @@ +/dts-v1/; + +#include "kirkwood-nsa3x0-common.dtsi" + +/* + * There are at least two different NSA310 designs. This variant has + * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller. + */ + +/ { + model = "ZyXEL NSA310b"; + compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + aliases { + led-boot = &led_green_sys; + led-failsafe = &led_red_sys; + led-running = &led_green_sys; + led-upgrade = &led_red_sys; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-names = "default"; + + pmx_led_esata_green: pmx-led-esata-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_esata_red: pmx-led-esata-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_led_usb_red: pmx-led-usb-red { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_red: pmx-led-sys-red { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_green: pmx-led-hdd-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_red: pmx-led-hdd-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + }; + + i2c@11000 { + status = "okay"; + + lm85: lm85@2e { + compatible = "national,lm85"; + reg = <0x2e>; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_green_sys: green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_red_sys: red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + + green-hdd { + label = "nsa310:green:hdd"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + + red-hdd { + label = "nsa310:red:hdd"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + + green-esata { + label = "nsa310:green:esata"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + + red-esata { + label = "nsa310:red:esata"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + + green-usb { + label = "nsa310:green:usb"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + + red-usb { + label = "nsa310:red:usb"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + + green-copy { + label = "nsa310:green:copy"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + + red-copy { + label = "nsa310:red:copy"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-on100.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-on100.dts new file mode 100644 index 0000000000..5ae66ede2f --- /dev/null +++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-on100.dts @@ -0,0 +1,165 @@ +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "Cisco Systems ON100"; + compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + aliases { + led-boot = &led_health_green; + led-failsafe = &led_health_red; + led-running = &led_health_green; + led-upgrade = &led_health_red; + serial0 = &uart0; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&pmx_btn_reset>; + pinctrl-names = "default"; + + reset { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&pmx_led_health_red &pmx_led_health_green>; + pinctrl-names = "default"; + + led_health_green: health-green { + label = "on100:green:health"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led_health_red: health-red { + label = "on100:red:health"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + health2-green { + label = "on100:green:health2"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + health2-red { + label = "on100:red:health2"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; + }; +}; + +ð1 { + status = "okay"; + + ethernet1-port@0 { + phy-handle = <ðphy1>; + phy-connection-type = "rgmii-id"; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + /* Marvell 88E1121R */ + compatible = "ethernet-phy-id0141.0cb0", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + /* Marvell 88E1121R */ + compatible = "ethernet-phy-id0141.0cb0", + "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x000a0000>; + read-only; + }; + + partition@a0000 { + label = "u-boot environment"; + reg = <0x000a0000 0x00020000>; + read-only; + }; + + partition@c0000 { + label = "kernel"; + reg = <0x000c0000 0x00540000>; + }; + + partition@600000 { + label = "ubi"; + reg = <0x00600000 0x1fa00000>; + }; +}; + +&pinctrl { + pmx_led_health_red: pmx-led-health-red { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_led_health_green: pmx-led-health-green { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_led_health2_red: pmx-led-health2-red { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_led_health2_green: pmx-led-health2-green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; +}; + +&sdio { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/target/linux/kirkwood/patches-5.4/100-ib62x0.patch b/target/linux/kirkwood/patches-5.4/100-ib62x0.patch new file mode 100644 index 0000000000..0637c24b63 --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/100-ib62x0.patch @@ -0,0 +1,53 @@ +--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts ++++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts +@@ -6,7 +6,14 @@ + + / { + model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; +- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ++ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ++ ++ aliases { ++ led-boot = &led_green_os; ++ led-failsafe = &led_red_os; ++ led-running = &led_green_os; ++ led-upgrade = &led_red_os; ++ }; + + memory { + device_type = "memory"; +@@ -81,12 +88,12 @@ + &pmx_led_usb_transfer>; + pinctrl-names = "default"; + +- green-os { ++ led_green_os: green-os { + label = "ib62x0:green:os"; + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; +- default-state = "keep"; ++ default-state = "on"; + }; +- red-os { ++ led_red_os: red-os { + label = "ib62x0:red:os"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + }; +@@ -118,13 +125,13 @@ + }; + + partition@100000 { +- label = "uImage"; +- reg = <0x0100000 0x600000>; ++ label = "second stage u-boot"; ++ reg = <0x100000 0x200000>; + }; + +- partition@700000 { +- label = "root"; +- reg = <0x0700000 0xf900000>; ++ partition@200000 { ++ label = "ubi"; ++ reg = <0x200000 0xfe00000>; + }; + + }; diff --git a/target/linux/kirkwood/patches-5.4/101-iconnect.patch b/target/linux/kirkwood/patches-5.4/101-iconnect.patch new file mode 100644 index 0000000000..935e2dfcf5 --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/101-iconnect.patch @@ -0,0 +1,80 @@ +--- a/arch/arm/boot/dts/kirkwood-iconnect.dts ++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts +@@ -8,6 +8,13 @@ + model = "Iomega Iconnect"; + compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_power_blue; ++ led-failsafe = &led_power_red; ++ led-running = &led_power_blue; ++ led-upgrade = &led_power_red; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; +@@ -16,8 +23,6 @@ + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; +- linux,initrd-start = <0x4500040>; +- linux,initrd-end = <0x4800000>; + }; + + ocp@f1000000 { +@@ -89,12 +94,12 @@ + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; +- power-blue { ++ led_power_blue: power-blue { + label = "power:blue"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; +- default-state = "keep"; ++ default-state = "on"; + }; +- power-red { ++ led_power_red: power-red { + label = "power:red"; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; +@@ -146,28 +151,23 @@ + status = "okay"; + + partition@0 { +- label = "uboot"; +- reg = <0x0000000 0xc0000>; ++ label = "u-boot"; ++ reg = <0x0000000 0xe0000>; + }; + +- partition@a0000 { +- label = "env"; +- reg = <0xa0000 0x20000>; ++ partition@e0000 { ++ label = "u-boot environment"; ++ reg = <0xe0000 0x100000>; + }; + + partition@100000 { +- label = "zImage"; +- reg = <0x100000 0x300000>; +- }; +- +- partition@540000 { +- label = "initrd"; +- reg = <0x540000 0x300000>; ++ label = "second stage u-boot"; ++ reg = <0x100000 0x200000>; + }; + +- partition@980000 { +- label = "boot"; +- reg = <0x980000 0x1f400000>; ++ partition@200000 { ++ label = "ubi"; ++ reg = <0x200000 0x1fe00000>; + }; + }; + diff --git a/target/linux/kirkwood/patches-5.4/102-dockstar.patch b/target/linux/kirkwood/patches-5.4/102-dockstar.patch new file mode 100644 index 0000000000..127f84962c --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/102-dockstar.patch @@ -0,0 +1,62 @@ +--- a/arch/arm/boot/dts/kirkwood-dockstar.dts ++++ b/arch/arm/boot/dts/kirkwood-dockstar.dts +@@ -8,6 +8,13 @@ + model = "Seagate FreeAgent Dockstar"; + compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; +@@ -42,12 +49,12 @@ + pinctrl-0 = <&pmx_led_green &pmx_led_orange>; + pinctrl-names = "default"; + +- health { ++ led_health: health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; +- default-state = "keep"; ++ default-state = "on"; + }; +- fault { ++ led_fault: fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; +@@ -78,18 +85,22 @@ + + partition@0 { + label = "u-boot"; +- reg = <0x0000000 0x100000>; +- read-only; ++ reg = <0x0000000 0xe0000>; ++ }; ++ ++ partition@e0000 { ++ label = "u-boot environment"; ++ reg = <0xe0000 0x100000>; + }; + + partition@100000 { +- label = "uImage"; +- reg = <0x0100000 0x400000>; ++ label = "second stage u-boot"; ++ reg = <0x100000 0x200000>; + }; + +- partition@500000 { +- label = "data"; +- reg = <0x0500000 0xfb00000>; ++ partition@200000 { ++ label = "ubi"; ++ reg = <0x200000 0xfe00000>; + }; + }; + diff --git a/target/linux/kirkwood/patches-5.4/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-5.4/103-iomega-ix2-200.patch new file mode 100644 index 0000000000..9313b4bc3e --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/103-iomega-ix2-200.patch @@ -0,0 +1,67 @@ +--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts ++++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +@@ -8,6 +8,13 @@ + model = "Iomega StorCenter ix2-200"; + compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_power; ++ led-failsafe = &led_health; ++ led-running = &led_power; ++ led-upgrade = &led_health; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; +@@ -127,16 +134,16 @@ + &pmx_led_rebuild &pmx_led_health >; + pinctrl-names = "default"; + +- power_led { ++ led_power: power_led { + label = "status:white:power_led"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; +- default-state = "keep"; ++ default-state = "on"; + }; + rebuild_led { + label = "status:white:rebuild_led"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + }; +- health_led { ++ led_health: health_led { + label = "status:red:health_led"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; +@@ -186,18 +193,18 @@ + }; + + partition@a0000 { +- label = "env"; ++ label = "u-boot environment"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@100000 { +- label = "uImage"; ++ label = "kernel"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { +- label = "rootfs"; ++ label = "ubi"; + reg = <0x400000 0x1C00000>; + }; + }; +@@ -211,7 +218,7 @@ + }; + + ð0 { +- status = "okay"; ++ status = "disabled"; + ethernet0-port@0 { + speed = <1000>; + duplex = <1>; diff --git a/target/linux/kirkwood/patches-5.4/105-ea4500.patch b/target/linux/kirkwood/patches-5.4/105-ea4500.patch new file mode 100644 index 0000000000..4c3c82bdfd --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/105-ea4500.patch @@ -0,0 +1,144 @@ +--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts ++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts +@@ -24,6 +24,10 @@ + }; + + aliases { ++ led-boot = &led_white_health; ++ led-failsafe = &led_white_health; ++ led-running = &led_white_health; ++ led-upgrade = &led_white_health; + serial0 = &uart0; + }; + +@@ -56,9 +60,10 @@ + pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; + pinctrl-names = "default"; + +- white-health { ++ led_white_health: white-health { + label = "viper:white:health"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; + }; + + white-pulse { +@@ -67,9 +72,18 @@ + }; + }; + +- dsa { +- status = "disabled"; ++ mvsw61xx { ++ compatible = "marvell,88e6171"; ++ status = "okay"; ++ reg = <0x10>; ++ ++ mii-bus = <&mdio>; ++ cpu-port-0 = <5>; ++ cpu-port-1 = <6>; ++ is-indirect; ++ }; + ++ dsa { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; +@@ -161,22 +175,22 @@ + }; + + partition@200000 { +- label = "kernel"; ++ label = "kernel1"; + reg = <0x200000 0x2A0000>; + }; + + partition@4a0000 { +- label = "rootfs"; ++ label = "rootfs1"; + reg = <0x4A0000 0x1760000>; + }; + + partition@1c00000 { +- label = "alt_kernel"; ++ label = "kernel2"; + reg = <0x1C00000 0x2A0000>; + }; + + partition@1ea0000 { +- label = "alt_rootfs"; ++ label = "rootfs2"; + reg = <0x1EA0000 0x1760000>; + }; + +@@ -207,53 +221,6 @@ + + &mdio { + status = "okay"; +- +- switch@10 { +- compatible = "marvell,mv88e6085"; +- #address-cells = <1>; +- #size-cells = <0>; +- reg = <16>; +- +- ports { +- #address-cells = <1>; +- #size-cells = <0>; +- +- port@0 { +- reg = <0>; +- label = "ethernet1"; +- }; +- +- port@1 { +- reg = <1>; +- label = "ethernet2"; +- }; +- +- port@2 { +- reg = <2>; +- label = "ethernet3"; +- }; +- +- port@3 { +- reg = <3>; +- label = "ethernet4"; +- }; +- +- port@4 { +- reg = <4>; +- label = "internet"; +- }; +- +- port@5 { +- reg = <5>; +- label = "cpu"; +- ethernet = <ð0port>; +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; +- }; +- }; +- }; + }; + + &uart0 { +@@ -272,10 +239,14 @@ + }; + + /* eth1 is connected to the switch at port 6. However DSA only supports a +- * single CPU port. So leave this port disabled to avoid confusion. ++ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion. + */ + ð1 { +- status = "disabled"; ++ status = "okay"; ++ ethernet1-port@0 { ++ speed = <1000>; ++ duplex = <1>; ++ }; + }; + + /* There is no battery on the board, so the RTC does not keep diff --git a/target/linux/kirkwood/patches-5.4/106-goflexnet.patch b/target/linux/kirkwood/patches-5.4/106-goflexnet.patch new file mode 100644 index 0000000000..82cf90841e --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/106-goflexnet.patch @@ -0,0 +1,53 @@ +--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts ++++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts +@@ -8,6 +8,13 @@ + model = "Seagate GoFlex Net"; + compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; +@@ -85,12 +92,12 @@ + >; + pinctrl-names = "default"; + +- health { ++ led_health: health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; +- default-state = "keep"; ++ default-state = "on"; + }; +- fault { ++ led_fault: fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; +@@ -159,18 +166,8 @@ + }; + + partition@100000 { +- label = "uImage"; +- reg = <0x0100000 0x400000>; +- }; +- +- partition@500000 { +- label = "pogoplug"; +- reg = <0x0500000 0x2000000>; +- }; +- +- partition@2500000 { +- label = "root"; +- reg = <0x02500000 0xd800000>; ++ label = "ubi"; ++ reg = <0x0100000 0x0ff00000>; + }; + }; + diff --git a/target/linux/kirkwood/patches-5.4/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-5.4/107-01-zyxel-nsa3x0-common-nand-partitions.patch new file mode 100644 index 0000000000..df654033fd --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/107-01-zyxel-nsa3x0-common-nand-partitions.patch @@ -0,0 +1,48 @@ +--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi ++++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi +@@ -112,40 +112,16 @@ + + partition@0 { + label = "uboot"; +- reg = <0x0000000 0x0100000>; ++ reg = <0x0000000 0x00c0000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; +- reg = <0x0100000 0x0080000>; ++ reg = <0x00c0000 0x0080000>; + }; +- partition@180000 { +- label = "key_store"; +- reg = <0x0180000 0x0080000>; +- }; +- partition@200000 { +- label = "info"; +- reg = <0x0200000 0x0080000>; +- }; +- partition@280000 { +- label = "etc"; +- reg = <0x0280000 0x0a00000>; +- }; +- partition@c80000 { +- label = "kernel_1"; +- reg = <0x0c80000 0x0a00000>; +- }; +- partition@1680000 { +- label = "rootfs1"; +- reg = <0x1680000 0x2fc0000>; +- }; +- partition@4640000 { +- label = "kernel_2"; +- reg = <0x4640000 0x0a00000>; +- }; +- partition@5040000 { +- label = "rootfs2"; +- reg = <0x5040000 0x2fc0000>; ++ partition@140000 { ++ label = "ubi"; ++ reg = <0x0140000 0x7ec0000>; + }; + }; + diff --git a/target/linux/kirkwood/patches-5.4/107-03-nsa325.patch b/target/linux/kirkwood/patches-5.4/107-03-nsa325.patch new file mode 100644 index 0000000000..36c77cd44a --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/107-03-nsa325.patch @@ -0,0 +1,31 @@ +--- a/arch/arm/boot/dts/kirkwood-nsa325.dts ++++ b/arch/arm/boot/dts/kirkwood-nsa325.dts +@@ -15,6 +15,13 @@ + model = "ZyXEL NSA325"; + compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_green_sys; ++ led-failsafe = &led_orange_sys; ++ led-running = &led_green_sys; ++ led-upgrade = &led_orange_sys; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; +@@ -162,11 +169,12 @@ + &pmx_led_hdd1_green &pmx_led_hdd1_red>; + pinctrl-names = "default"; + +- green-sys { ++ led_green_sys: green-sys { + label = "nsa325:green:sys"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; + }; +- orange-sys { ++ led_orange_sys: orange-sys { + label = "nsa325:orange:sys"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; diff --git a/target/linux/kirkwood/patches-5.4/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-5.4/109-pogoplug_v4.patch new file mode 100644 index 0000000000..4273eb9af1 --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/109-pogoplug_v4.patch @@ -0,0 +1,87 @@ +--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts ++++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +@@ -18,12 +18,20 @@ + compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", + "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { ++ bootargs = "console=ttyS0,115200"; + stdout-path = "uart0:115200n8"; + }; + +@@ -37,8 +45,8 @@ + eject { + debounce-interval = <50>; + wakeup-source; +- linux,code = ; +- label = "Eject Button"; ++ linux,code = ; ++ label = "Reset"; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; +@@ -48,12 +56,12 @@ + pinctrl-0 = <&pmx_led_green &pmx_led_red>; + pinctrl-names = "default"; + +- health { ++ led_health: health { + label = "pogoplugv4:green:health"; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; +- fault { ++ led_fault: fault { + label = "pogoplugv4:red:fault"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; +@@ -137,29 +145,19 @@ + #size-cells = <1>; + + partition@0 { +- label = "u-boot"; +- reg = <0x00000000 0x200000>; ++ label = "uboot"; ++ reg = <0x00000000 0x1c0000>; + read-only; + }; + +- partition@200000 { +- label = "uImage"; +- reg = <0x00200000 0x300000>; +- }; +- +- partition@500000 { +- label = "uImage2"; +- reg = <0x00500000 0x300000>; +- }; +- +- partition@800000 { +- label = "failsafe"; +- reg = <0x00800000 0x800000>; ++ partition@1c0000 { ++ label = "uboot_env"; ++ reg = <0x001c0000 0x40000>; + }; + +- partition@1000000 { +- label = "root"; +- reg = <0x01000000 0x7000000>; ++ partition@200000 { ++ label = "ubi"; ++ reg = <0x00200000 0x7e00000>; + }; + }; + }; diff --git a/target/linux/kirkwood/patches-5.4/110-pogo_e02.patch b/target/linux/kirkwood/patches-5.4/110-pogo_e02.patch new file mode 100644 index 0000000000..59d2893466 --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/110-pogo_e02.patch @@ -0,0 +1,32 @@ +--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts ++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts +@@ -20,6 +20,13 @@ + compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", + "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; +@@ -33,12 +40,12 @@ + gpio-leds { + compatible = "gpio-leds"; + +- health { ++ led_health: health { + label = "pogo_e02:green:health"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; +- default-state = "keep"; ++ default-state = "on"; + }; +- fault { ++ led_fault: fault { + label = "pogo_e02:orange:fault"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; diff --git a/target/linux/kirkwood/patches-5.4/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-5.4/201-enable-sata-port-specific-led-triggers.patch new file mode 100644 index 0000000000..71d9bba3f1 --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/201-enable-sata-port-specific-led-triggers.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/mach-mvebu/Kconfig ++++ b/arch/arm/mach-mvebu/Kconfig +@@ -118,6 +118,7 @@ config MACH_DOVE + config MACH_KIRKWOOD + bool "Marvell Kirkwood boards" + depends on ARCH_MULTI_V5 ++ select ARCH_WANT_LIBATA_LEDS + select CPU_FEROCEON + select GPIOLIB + select KIRKWOOD_CLK diff --git a/target/linux/kirkwood/patches-5.4/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-5.4/202-linksys-find-active-root.patch new file mode 100644 index 0000000000..860d7b0728 --- /dev/null +++ b/target/linux/kirkwood/patches-5.4/202-linksys-find-active-root.patch @@ -0,0 +1,62 @@ +The WRT1900AC among other Linksys routers uses a dual-firmware layout. +Dynamically rename the active partition to "ubi". + +Signed-off-by: Imre Kaloz +--- +--- a/drivers/mtd/ofpart.c ++++ b/drivers/mtd/ofpart.c +@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d + return of_get_property(pp, "compatible", NULL); + } + ++static int mangled_rootblock; ++ + static int parse_fixed_partitions(struct mtd_info *master, + const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) +@@ -32,6 +34,7 @@ static int parse_fixed_partitions(struct + struct mtd_partition *parts; + struct device_node *mtd_node; + struct device_node *ofpart_node; ++ const char *owrtpart = "ubi"; + const char *partname; + struct device_node *pp; + int nr_parts, i, ret = 0; +@@ -110,9 +113,15 @@ static int parse_fixed_partitions(struct + parts[i].size = of_read_number(reg + a_cells, s_cells); + parts[i].of_node = pp; + +- partname = of_get_property(pp, "label", &len); +- if (!partname) +- partname = of_get_property(pp, "name", &len); ++ if (mangled_rootblock && (i == mangled_rootblock)) { ++ partname = owrtpart; ++ } else { ++ partname = of_get_property(pp, "label", &len); ++ ++ if (!partname) ++ partname = of_get_property(pp, "name", &len); ++ } ++ + parts[i].name = partname; + + if (of_get_property(pp, "read-only", &len)) +@@ -219,6 +228,18 @@ static int __init ofpart_parser_init(voi + return 0; + } + ++static int __init active_root(char *str) ++{ ++ get_option(&str, &mangled_rootblock); ++ ++ if (!mangled_rootblock) ++ return 1; ++ ++ return 1; ++} ++ ++__setup("mangled_rootblock=", active_root); ++ + static void __exit ofpart_parser_exit(void) + { + deregister_mtd_parser(&ofpart_parser);