From: Nick Hainke Date: Sun, 25 Oct 2020 13:51:55 +0000 (+0100) Subject: ath79: Add support for Ubiquiti NanoBeam AC Gen2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=79f3f1358bf993a5d7ae14eba9cea2686b40841d;p=openwrt%2Fstaging%2Frobimarko.git ath79: Add support for Ubiquiti NanoBeam AC Gen2 CPU: Atheros AR9342 rev 3 SoC RAM: 64 MB DDR2 Flash: 16 MB NOR SPI WLAN 2.4GHz: Atheros AR9342 v3 (ath9k) WLAN 5.0GHz: QCA988X Ports: 2x GbE Flashing procedure is identical to other ubnt devices. https://openwrt.org/toh/ubiquiti/common Flashing through factory firmware 1. Ensure firmware version v8.7.0 is installed. Up/downgrade to this exact version. 2. Patch fwupdate.real binary using `hexdump -Cv /bin/ubntbox | sed 's/14 40 fe 27/00 00 00 00/g' | \ hexdump -R > /tmp/fwupdate.real` 3. Make the patched fwupdate.real binary executable using `chmod +x /tmp/fwupdate.real` 4. Copy the squashfs factory image to /tmp on the device 5. Flash OpenWrt using `/tmp/fwupdate.real -m ` 6. Wait for the device to reboot (copied from Ubiquiti NanoBeam AC and modified) To keep it consistent, we will add the gen1 variant to the nanobeam ac gen1. Signed-off-by: Nick Hainke --- diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac-gen2.dts b/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac-gen2.dts new file mode 100644 index 0000000000..08f3d2c6d8 --- /dev/null +++ b/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac-gen2.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "ar9342_ubnt_wa_2port.dtsi" + +/ { + compatible = "ubnt,nanobeam-ac-gen2", "ubnt,wa", "qca,ar9342"; + model = "Ubiquiti NanoBeam AC Gen2 (WA)"; + + aliases { + led-boot = &led_rssi3; + led-failsafe = &led_rssi3; + led-upgrade = &led_rssi3; + }; + + leds { + compatible = "gpio-leds"; + + rssi0 { + label = "blue:rssi0"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + rssi1 { + label = "blue:rssi1"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + rssi2 { + label = "blue:rssi2"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + led_rssi3: rssi3 { + label = "blue:rssi3"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac.dts b/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac.dts index dc2537a77e..b32a200b11 100644 --- a/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac.dts +++ b/target/linux/ath79/dts/ar9342_ubnt_nanobeam-ac.dts @@ -4,7 +4,7 @@ / { compatible = "ubnt,nanobeam-ac", "ubnt,wa", "qca,ar9342"; - model = "Ubiquiti NanoBeam AC (WA)"; + model = "Ubiquiti NanoBeam AC Gen1 (WA)"; aliases { led-boot = &led_rssi3; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 227e64678d..08ca2a8398 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -362,6 +362,7 @@ ubnt,rocket-m) ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:link4" "wlan0" "76" "100" ;; ubnt,nanobeam-ac|\ +ubnt,nanobeam-ac-gen2|\ ubnt,nanostation-ac|\ ubnt,powerbeam-5ac-gen2) ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index a587cfac96..58518a8273 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -248,6 +248,7 @@ ath79_setup_interfaces() qxwlan,e1700ac-v2-16m|\ qxwlan,e750g-v8-8m|\ qxwlan,e750g-v8-16m|\ + ubnt,nanobeam-ac-gen2|\ ubnt,nanostation-ac|\ yuncore,a782|\ yuncore,xd4200) @@ -582,6 +583,7 @@ ath79_setup_macs() label_mac=$wan_mac ;; ubnt,litebeam-ac-gen2|\ + ubnt,nanobeam-ac-gen2|\ ubnt,powerbeam-5ac-500|\ ubnt,powerbeam-5ac-gen2) label_mac=$(mtd_get_mac_binary art 0x5006) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches index d390fdfbe2..8ec0af53d4 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches @@ -76,6 +76,7 @@ tplink,wbs510-v2) ubnt,aircube-isp) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "11" ;; +ubnt,nanobeam-ac-gen2|\ ubnt,nanostation-ac) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3" ;; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 1e205468b7..83ffc8f862 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -33,6 +33,7 @@ case "$FIRMWARE" in ubnt,lap-120|\ ubnt,litebeam-ac-gen2|\ ubnt,nanobeam-ac|\ + ubnt,nanobeam-ac-gen2|\ ubnt,nanostation-ac|\ ubnt,nanostation-ac-loco|\ ubnt,powerbeam-5ac-500|\ diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk index cd67ea2904..6e12c34d85 100644 --- a/target/linux/ath79/image/generic-ubnt.mk +++ b/target/linux/ath79/image/generic-ubnt.mk @@ -190,10 +190,19 @@ TARGET_DEVICES += ubnt_litebeam-ac-gen2 define Device/ubnt_nanobeam-ac $(Device/ubnt-wa) DEVICE_MODEL := NanoBeam AC + DEVICE_VARIANT := Gen1 DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds endef TARGET_DEVICES += ubnt_nanobeam-ac +define Device/ubnt_nanobeam-ac-gen2 + $(Device/ubnt-wa) + DEVICE_MODEL := NanoBeam AC + DEVICE_VARIANT := Gen2 + DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds +endef +TARGET_DEVICES += ubnt_nanobeam-ac-gen2 + define Device/ubnt_nanobridge-m $(Device/ubnt-xm) SOC := ar7241