From: Mathias Kresin <dev@kresin.me>
Date: Tue, 16 Feb 2021 18:34:48 +0000 (+0100)
Subject: lantiq: ARV752DPW22: set the usb led trigger via devicetree
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7995a937447221a757ca8a0330a46944eacff473;p=openwrt%2Fstaging%2Flynxis.git

lantiq: ARV752DPW22: set the usb led trigger via devicetree

Assign the usbdev trigger via devicetree and drop the userspace
handling of the usb leds

Add the PCI attached usb controller as trigger sources for the usb led
as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
---

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi
index ced3e3bcb4..bb3e9fb188 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -254,6 +254,8 @@
 		};
 
 		usb: usb@e101000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "lantiq,danube-usb";
 			reg = <0xe101000 0x1000
 				0xe120000 0x3f000>;
@@ -263,6 +265,11 @@
 			phys = <&usb_phy>;
 			phy-names = "usb2-phy";
 			status = "disabled";
+
+			ehci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
 		};
 
 		deu@e103100 {
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts
index 72483e4749..00ac016a42 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/danube_arcadyan_arv752dpw22.dts
@@ -17,7 +17,6 @@
 		led-upgrade = &power_red;
 
 		led-dsl = &internet_red;
-		led-usb = &umts;
 		led-wifi = &wifi;
 	};
 
@@ -78,6 +77,9 @@
 		umts: umts {
 			label = "red:umts";
 			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port1>,
+					  <&ehci_port2>, <&uhci_port2>;
+			linux,default-trigger = "usbport";
 		};
 		wifi: wifi {
 			label = "red:wifi";
@@ -242,6 +244,30 @@
 		ralink,mtd-eeprom-swap;
 		mtd-mac-address = <&boardconfig 0x16>;
 	};
+
+	usb@0f,0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "pci1106,3038";
+		reg = <0x7800 0 0 0 0>; /* 0000:00:0f.0: UHCI Host Controller */
+
+		uhci_port2: port@2 {
+			reg = <2>;
+			#trigger-source-cells = <0>;
+		};
+	};
+
+	usb@0f,2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "pci1106,3038";
+		reg = <0x7a00 0 0 0 0>; /* 0000:00:0f.2: EHCI Host Controller*/
+
+		ehci_port2: port@2 {
+			reg = <2>;
+			#trigger-source-cells = <0>;
+		};
+	};
 };
 
 &usb_phy {