From: Johannes Stezenbach Date: Mon, 11 Jul 2011 15:01:23 +0000 (+0200) Subject: ASoC: STA32x: Add mixer controls for biquad coefficients X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=796884391504426e9da15bdf76f73c5f4eda3714;p=openwrt%2Fstaging%2Fblogic.git ASoC: STA32x: Add mixer controls for biquad coefficients The STA32x has a number of preset EQ settings, but also allows full user control of the biquad filter coeffcients (when "Automode EQ" is set to "User"). Each biquad has five signed, 24bit, fixed-point coefficients representing the range -1...1. The five biquad coefficients can be uploaded in one atomic operation into on-chip coefficient RAM. There are also a few prescale, postscale and mixing coefficients, in the same numeric format and range (a negative coefficient inverts phase). These coefficients are made available as SNDRV_CTL_ELEM_TYPE_BYTES mixer controls. Signed-off-by: Johannes Stezenbach Signed-off-by: Mark Brown --- diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index 486628a144b4..9bf944ca43a1 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -177,6 +177,95 @@ static const struct soc_enum sta32x_limiter1_release_rate_enum = static const struct soc_enum sta32x_limiter2_release_rate_enum = SOC_ENUM_SINGLE(STA32X_L2AR, STA32X_LxR_SHIFT, 16, sta32x_limiter_release_rate); + +/* byte array controls for setting biquad, mixer, scaling coefficients; + * for biquads all five coefficients need to be set in one go, + * mixer and pre/postscale coefs can be set individually; + * each coef is 24bit, the bytes are ordered in the same way + * as given in the STA32x data sheet (big endian; b1, b2, a1, a2, b0) + */ + +static int sta32x_coefficient_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + int numcoef = kcontrol->private_value >> 16; + uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES; + uinfo->count = 3 * numcoef; + return 0; +} + +static int sta32x_coefficient_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int numcoef = kcontrol->private_value >> 16; + int index = kcontrol->private_value & 0xffff; + unsigned int cfud; + int i; + + /* preserve reserved bits in STA32X_CFUD */ + cfud = snd_soc_read(codec, STA32X_CFUD) & 0xf0; + /* chip documentation does not say if the bits are self clearing, + * so do it explicitly */ + snd_soc_write(codec, STA32X_CFUD, cfud); + + snd_soc_write(codec, STA32X_CFADDR2, index); + if (numcoef == 1) + snd_soc_write(codec, STA32X_CFUD, cfud | 0x04); + else if (numcoef == 5) + snd_soc_write(codec, STA32X_CFUD, cfud | 0x08); + else + return -EINVAL; + for (i = 0; i < 3 * numcoef; i++) + ucontrol->value.bytes.data[i] = + snd_soc_read(codec, STA32X_B1CF1 + i); + + return 0; +} + +static int sta32x_coefficient_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int numcoef = kcontrol->private_value >> 16; + int index = kcontrol->private_value & 0xffff; + unsigned int cfud; + int i; + + /* preserve reserved bits in STA32X_CFUD */ + cfud = snd_soc_read(codec, STA32X_CFUD) & 0xf0; + /* chip documentation does not say if the bits are self clearing, + * so do it explicitly */ + snd_soc_write(codec, STA32X_CFUD, cfud); + + snd_soc_write(codec, STA32X_CFADDR2, index); + for (i = 0; i < 3 * numcoef; i++) + snd_soc_write(codec, STA32X_B1CF1 + i, + ucontrol->value.bytes.data[i]); + if (numcoef == 1) + snd_soc_write(codec, STA32X_CFUD, cfud | 0x01); + else if (numcoef == 5) + snd_soc_write(codec, STA32X_CFUD, cfud | 0x02); + else + return -EINVAL; + + return 0; +} + +#define SINGLE_COEF(xname, index) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = sta32x_coefficient_info, \ + .get = sta32x_coefficient_get,\ + .put = sta32x_coefficient_put, \ + .private_value = index | (1 << 16) } + +#define BIQUAD_COEFS(xname, index) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = sta32x_coefficient_info, \ + .get = sta32x_coefficient_get,\ + .put = sta32x_coefficient_put, \ + .private_value = index | (5 << 16) } + static const struct snd_kcontrol_new sta32x_snd_controls[] = { SOC_SINGLE_TLV("Master Volume", STA32X_MVOL, 0, 0xff, 1, mvol_tlv), SOC_SINGLE("Master Switch", STA32X_MMUTE, 0, 1, 1), @@ -232,6 +321,29 @@ SOC_SINGLE_TLV("Limiter1 Release Threshold (DRC Mode)", STA32X_L1ATRT, STA32X_Lx 16, 0, sta32x_limiter_drc_release_tlv), SOC_SINGLE_TLV("Limiter2 Release Threshold (DRC Mode)", STA32X_L2ATRT, STA32X_LxR_SHIFT, 16, 0, sta32x_limiter_drc_release_tlv), + +BIQUAD_COEFS("Ch1 - Biquad 1", 0), +BIQUAD_COEFS("Ch1 - Biquad 2", 5), +BIQUAD_COEFS("Ch1 - Biquad 3", 10), +BIQUAD_COEFS("Ch1 - Biquad 4", 15), +BIQUAD_COEFS("Ch2 - Biquad 1", 20), +BIQUAD_COEFS("Ch2 - Biquad 2", 25), +BIQUAD_COEFS("Ch2 - Biquad 3", 30), +BIQUAD_COEFS("Ch2 - Biquad 4", 35), +BIQUAD_COEFS("High-pass", 40), +BIQUAD_COEFS("Low-pass", 45), +SINGLE_COEF("Ch1 - Prescale", 50), +SINGLE_COEF("Ch2 - Prescale", 51), +SINGLE_COEF("Ch1 - Postscale", 52), +SINGLE_COEF("Ch2 - Postscale", 53), +SINGLE_COEF("Ch3 - Postscale", 54), +SINGLE_COEF("Thermal warning - Postscale", 55), +SINGLE_COEF("Ch1 - Mix 1", 56), +SINGLE_COEF("Ch1 - Mix 2", 57), +SINGLE_COEF("Ch2 - Mix 1", 58), +SINGLE_COEF("Ch2 - Mix 2", 59), +SINGLE_COEF("Ch3 - Mix 1", 60), +SINGLE_COEF("Ch3 - Mix 2", 61), }; static const struct snd_soc_dapm_widget sta32x_dapm_widgets[] = { @@ -686,6 +798,17 @@ static int sta32x_remove(struct snd_soc_codec *codec) return 0; } +static int sta32x_reg_is_volatile(struct snd_soc_codec *codec, + unsigned int reg) +{ + switch (reg) { + case STA32X_CONFA ... STA32X_L2ATRT: + case STA32X_MPCC1 ... STA32X_FDRC2: + return 0; + } + return 1; +} + static const struct snd_soc_codec_driver sta32x_codec = { .probe = sta32x_probe, .remove = sta32x_remove, @@ -693,6 +816,7 @@ static const struct snd_soc_codec_driver sta32x_codec = { .resume = sta32x_resume, .reg_cache_size = STA32X_REGISTER_COUNT, .reg_word_size = sizeof(u8), + .volatile_register = sta32x_reg_is_volatile, .set_bias_level = sta32x_set_bias_level, .controls = sta32x_snd_controls, .num_controls = ARRAY_SIZE(sta32x_snd_controls),