From: Daniel Fuchs Date: Tue, 25 Oct 2022 01:13:30 +0000 (+0000) Subject: ramips: add support for Amped Wireless B1200EX X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=794d1645b3d4e6735b4a749f39cfeaa05f60b101;p=openwrt%2Fstaging%2Fnbd.git ramips: add support for Amped Wireless B1200EX This device is almost identical to the already supported Edimax EW-7476RP5, the only differences are: - There is no mode selection slider switch on this device - The two wireless LEDs are green instead of blue - Model name in the CSYS header is RN10 Additional changes: - Moved WiFi LEDs and the slider switch to the individual dt files - Added ieee80211-freq-limit to the mt7612e radio to properly disable 2.4GHz band on this radio Device specifications: SoC: MediaTek MT7620a @ 580MHz RAM: 64M (Winbond W9751G6KB-25) FLASH: 8MB (Macronix) WiFi: SoC-integrated: MediaTek MT7620a bgn WiFi: MediaTek MT7612EN nac GbE: 1x (RTL8211E) BTN: WPS/RESET LED: - WiFi 5G (green) - WiFi 2.4G (green) - Signal Strength (green) - Power (green) - WPS (green) - LAN (green) UART: UART is present as Pads with throughholes on the PCB. They are located next to the WPS button 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation: Upload the sysupgrade image via the default web interface Signed-off-by: Daniel Fuchs --- diff --git a/target/linux/ramips/dts/mt7620a_ampedwireless_b1200ex.dts b/target/linux/ramips/dts/mt7620a_ampedwireless_b1200ex.dts new file mode 100644 index 0000000000..10871140e9 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_ampedwireless_b1200ex.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620a_edimax_ew-747x.dtsi" + +/ { + compatible = "ampedwireless,b1200ex", "ralink,mt7620a-soc"; + model = "Amped Wireless B1200EX"; + + leds { + wlan2g { + label = "green:wlan2g"; + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1radio"; + }; + + wlan5g { + label = "green:wlan5g"; + gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0radio"; + }; + + signal_strength { + label = "green:signal_strength"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts b/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts index ebab7e4089..e4fc2d03e4 100644 --- a/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-7476rpc.dts @@ -5,4 +5,39 @@ / { compatible = "edimax,ew-7476rpc", "ralink,mt7620a-soc"; model = "Edimax EW-7476RPC"; + + keys { + switch_high { + label = "switch high"; + gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + switch_off { + label = "switch off"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + }; + + leds { + wlan2g { + label = "blue:wlan2g"; + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1radio"; + }; + + wlan5g { + label = "blue:wlan5g"; + gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0radio"; + }; + + crossband { + label = "green:crossband"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + }; }; diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts b/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts index a0fa2e3da8..97da9cda4b 100644 --- a/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-7478ac.dts @@ -5,4 +5,39 @@ / { compatible = "edimax,ew-7478ac", "ralink,mt7620a-soc"; model = "Edimax EW-7478AC"; + + keys { + switch_high { + label = "switch high"; + gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + switch_off { + label = "switch off"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + }; + + leds { + wlan2g { + label = "blue:wlan2g"; + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1radio"; + }; + + wlan5g { + label = "blue:wlan5g"; + gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0radio"; + }; + + crossband { + label = "green:crossband"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + }; + }; }; diff --git a/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi b/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi index 1d77c27f5f..abac0208d0 100644 --- a/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi +++ b/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi @@ -24,20 +24,6 @@ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; linux,code = ; }; - - switch_high { - label = "switch high"; - gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - switch_off { - label = "switch off"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; }; leds { @@ -53,27 +39,10 @@ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; }; - wlan2g { - label = "blue:wlan2g"; - gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1radio"; - }; - - wlan5g { - label = "blue:wlan5g"; - gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0radio"; - }; - wps { label = "green:wps"; gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; }; - - crossband { - label = "green:crossband"; - gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; - }; }; }; @@ -206,6 +175,8 @@ &wmac { ralink,mtd-eeprom = <&factory 0x0>; + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; }; &pcie { @@ -216,7 +187,10 @@ wifi@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; - mediatek,2ghz = <0>; + ieee80211-freq-limit = <5000000 6000000>; + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <2>; }; }; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 231f6ad47d..6c22dfbbdd 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -75,6 +75,19 @@ define Device/amit_jboot DEVICE_PACKAGES := jboot-tools kmod-usb2 kmod-usb-ohci endef +define Device/ampedwireless_b1200ex + SOC := mt7620a + DEVICE_VENDOR := Amped Wireless + DEVICE_MODEL := B1200EX + BLOCKSIZE := 4k + IMAGE_SIZE := 7744k + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \ + edimax-header -s CSYS -m RN10 -f 0x70000 -S 0x01100000 | pad-rootfs | \ + check-size | append-metadata + DEVICE_PACKAGES := kmod-mt76x2 kmod-phy-realtek +endef +TARGET_DEVICES += ampedwireless_b1200ex + define Device/asus_rp-n53 SOC := mt7620a IMAGE_SIZE := 7872k diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index b1dc36672d..d52beefdcc 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -101,6 +101,7 @@ edimax,br-6478ac-v2|\ edimax,ew-7478apc) ucidef_set_led_netdev "wifi_led" "wifi" "blue:wlan" "wlan0" ;; +ampedwireless,b1200ex|\ edimax,ew-7476rpc|\ edimax,ew-7478ac) ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x20" diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index ac1cf5e62a..13f9453442 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -38,6 +38,7 @@ ramips_setup_interfaces() "3:lan" "4:wan" "6@eth0" ;; alfa-network,tube-e4g|\ + ampedwireless,b1200ex|\ buffalo,wmr-300|\ dlink,dch-m225|\ edimax,ew-7476rpc|\