From: Álvaro Fernández Rojas Date: Thu, 8 Jun 2023 17:49:36 +0000 (+0200) Subject: bcm27xx: 6.1: add kernel patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=793f8ab62cabd5de3cd9a1d4bf2102fdfa1dc724;p=openwrt%2Fopenwrt.git bcm27xx: 6.1: add kernel patches Add kernel patches for version 6.1. Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/bcm27xx/modules/sound.mk b/target/linux/bcm27xx/modules/sound.mk index 47c0a93879..c720bd502d 100644 --- a/target/linux/bcm27xx/modules/sound.mk +++ b/target/linux/bcm27xx/modules/sound.mk @@ -382,6 +382,30 @@ endef $(eval $(call KernelPackage,sound-soc-chipdip-dac)) +define KernelPackage/sound-soc-dacberry-soundcard + TITLE:=Support for DACBERRY400 Soundcard + KCONFIG:= \ + CONFIG_SND_DACBERRY400 \ + CONFIG_SND_SOC_TLV320AIC3X_I2C + FILES:= \ + $(LINUX_DIR)/sound/soc/bcm/snd-soc-dacberry400.ko \ + $(LINUX_DIR)/sound/soc/codecs/snd-soc-tlv320aic3x.ko + AUTOLOAD:=$(call AutoLoad,68,snd-soc-tlv320aic3x-i2c snd-soc-dacberry400) + DEPENDS:= \ + @LINUX_6_1 \ + kmod-sound-soc-bcm2835-i2s \ + +kmod-i2c-bcm2835 \ + +kmod-regmap-i2c + $(call AddDepends/sound) +endef + +define KernelPackage/sound-soc-dacberry-soundcard/description + This package contains support for DACBERRY400 Soundcard +endef + +$(eval $(call KernelPackage,sound-soc-dacberry-soundcard)) + + define KernelPackage/sound-soc-digidac1-soundcard TITLE:=Support for RRA DigiDAC1 KCONFIG:= \ @@ -947,6 +971,7 @@ define KernelPackage/sound-soc-rpi-cirrus CONFIG_SND_SOC_WM8804 \ CONFIG_SND_SOC_WM_ADSP FILES:= \ + $(LINUX_DIR)/drivers/firmware/cirrus/cs_dsp.ko@ge6.1 \ $(LINUX_DIR)/drivers/mfd/arizona.ko \ $(LINUX_DIR)/drivers/mfd/arizona-i2c.ko \ $(LINUX_DIR)/sound/soc/bcm/snd-soc-rpi-cirrus.ko \ @@ -954,7 +979,7 @@ define KernelPackage/sound-soc-rpi-cirrus $(LINUX_DIR)/sound/soc/codecs/snd-soc-wm-adsp.ko \ $(LINUX_DIR)/sound/soc/codecs/snd-soc-wm5102.ko \ $(LINUX_DIR)/sound/soc/codecs/snd-soc-wm8804.ko - AUTOLOAD:=$(call AutoLoad,68,snd-soc-pcm1794a snd-soc-rpi-cirrus) + AUTOLOAD:=$(call AutoLoad,68,snd-soc-rpi-cirrus) DEPENDS:= \ kmod-sound-soc-bcm2835-i2s \ +kmod-i2c-bcm2835 \ diff --git a/target/linux/bcm27xx/modules/video.mk b/target/linux/bcm27xx/modules/video.mk index 07e6594890..d724a2d307 100644 --- a/target/linux/bcm27xx/modules/video.mk +++ b/target/linux/bcm27xx/modules/video.mk @@ -7,7 +7,12 @@ define KernelPackage/camera-bcm2835 KCONFIG:= \ CONFIG_VIDEO_BCM2835 \ CONFIG_VIDEO_BCM2835_MMAL \ + CONFIG_VIDEO_ARDUCAM_64MP=n@ge6.1 \ + CONFIG_VIDEO_ARDUCAM_PIVARIETY=n@ge6.1 \ CONFIG_VIDEO_BCM2835_UNICAM=n \ + CONFIG_VIDEO_IMX296=n@ge6.1 \ + CONFIG_VIDEO_IMX519=n@ge6.1 \ + CONFIG_VIDEO_IMX708=n@ge6.1 \ CONFIG_VIDEO_ISP_BCM2835=n FILES:= \ $(LINUX_DIR)/drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko @@ -37,6 +42,8 @@ define KernelPackage/drm-vc4 CONFIG_DRM_V3D=n \ CONFIG_DRM_TVE200=n FILES:= \ + $(LINUX_DIR)/drivers/gpu/drm/display/drm_display_helper.ko@ge6.1 \ + $(LINUX_DIR)/drivers/gpu/drm/drm_dma_helper.ko@ge6.1 \ $(LINUX_DIR)/drivers/gpu/drm/vc4/vc4.ko \ $(LINUX_DIR)/drivers/gpu/drm/drm_kms_helper.ko \ $(LINUX_DIR)/drivers/media/cec/core/cec.ko diff --git a/target/linux/bcm27xx/patches-6.1/950-0001-Support-RPi-DPI-interface-in-mode6-for-18-bit-color.patch b/target/linux/bcm27xx/patches-6.1/950-0001-Support-RPi-DPI-interface-in-mode6-for-18-bit-color.patch new file mode 100644 index 0000000000..1dd352d189 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0001-Support-RPi-DPI-interface-in-mode6-for-18-bit-color.patch @@ -0,0 +1,32 @@ +From 6da5134dcde68af6d86003931375ca1a6e6d0169 Mon Sep 17 00:00:00 2001 +From: Joerg Quinten +Date: Fri, 18 Jun 2021 13:02:29 +0200 +Subject: [PATCH] Support RPi DPI interface in mode6 for 18-bit color + +A matching media bus format was added and an overlay for using it, +both with FB and VC4 was added as well. + +Signed-off-by: Joerg Quinten +--- + drivers/gpu/drm/vc4/vc4_dpi.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_dpi.c ++++ b/drivers/gpu/drm/vc4/vc4_dpi.c +@@ -170,10 +170,16 @@ static void vc4_dpi_encoder_enable(struc + dpi_c |= VC4_SET_FIELD(DPI_ORDER_BGR, + DPI_ORDER); + break; ++ case MEDIA_BUS_FMT_BGR666_1X24_CPADHI: ++ dpi_c |= VC4_SET_FIELD(DPI_ORDER_BGR, DPI_ORDER); ++ fallthrough; + case MEDIA_BUS_FMT_RGB666_1X24_CPADHI: + dpi_c |= VC4_SET_FIELD(DPI_FORMAT_18BIT_666_RGB_2, + DPI_FORMAT); + break; ++ case MEDIA_BUS_FMT_BGR666_1X18: ++ dpi_c |= VC4_SET_FIELD(DPI_ORDER_BGR, DPI_ORDER); ++ fallthrough; + case MEDIA_BUS_FMT_RGB666_1X18: + dpi_c |= VC4_SET_FIELD(DPI_FORMAT_18BIT_666_RGB_1, + DPI_FORMAT); diff --git a/target/linux/bcm27xx/patches-6.1/950-0002-drm-vc4-Add-FKMS-as-an-acceptable-node-for-dma-range.patch b/target/linux/bcm27xx/patches-6.1/950-0002-drm-vc4-Add-FKMS-as-an-acceptable-node-for-dma-range.patch new file mode 100644 index 0000000000..a64d7821db --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0002-drm-vc4-Add-FKMS-as-an-acceptable-node-for-dma-range.patch @@ -0,0 +1,27 @@ +From 588c5e6269307ccd908986b7514676d6729e0e0d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 19 May 2020 16:20:30 +0100 +Subject: [PATCH] drm/vc4: Add FKMS as an acceptable node for dma + ranges. + +Under FKMS, the firmware (via FKMS) also requires the VideoCore cache +aliases for image planes, as defined by the dma-ranges under /soc. + +Add rpi-firmware-kms to the list of acceptable nodes to look for +to copy dma config from. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_drv.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -276,6 +276,7 @@ static void vc4_component_unbind_all(voi + static const struct of_device_id vc4_dma_range_matches[] = { + { .compatible = "brcm,bcm2711-hvs" }, + { .compatible = "brcm,bcm2835-hvs" }, ++ { .compatible = "raspberrypi,rpi-firmware-kms" }, + { .compatible = "brcm,bcm2835-v3d" }, + { .compatible = "brcm,cygnus-v3d" }, + { .compatible = "brcm,vc4-v3d" }, diff --git a/target/linux/bcm27xx/patches-6.1/950-0003-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch b/target/linux/bcm27xx/patches-6.1/950-0003-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch new file mode 100644 index 0000000000..a319e1cb3f --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0003-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch @@ -0,0 +1,24 @@ +From 535402af94be945587cc7c7f3346b31e3fa46bc9 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 26 Oct 2020 12:38:27 +0000 +Subject: [PATCH] drm/vc4: Add the 2711 HVS as a suitable DMA node + +With vc4-drv node not being under /soc on Pi4, we need to +adopt the correct DMA parameters from a suitable sub-component. +Add "brcm,bcm2711-hvs" to that list of components. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_drv.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -276,6 +276,7 @@ static void vc4_component_unbind_all(voi + static const struct of_device_id vc4_dma_range_matches[] = { + { .compatible = "brcm,bcm2711-hvs" }, + { .compatible = "brcm,bcm2835-hvs" }, ++ { .compatible = "brcm,bcm2711-hvs" }, + { .compatible = "raspberrypi,rpi-firmware-kms" }, + { .compatible = "brcm,bcm2835-v3d" }, + { .compatible = "brcm,cygnus-v3d" }, diff --git a/target/linux/bcm27xx/patches-6.1/950-0004-drm-vc4-Change-the-default-DPI-format-to-being-18bpp.patch b/target/linux/bcm27xx/patches-6.1/950-0004-drm-vc4-Change-the-default-DPI-format-to-being-18bpp.patch new file mode 100644 index 0000000000..317f9fbea1 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0004-drm-vc4-Change-the-default-DPI-format-to-being-18bpp.patch @@ -0,0 +1,34 @@ +From 6f0bbf91998cb04030731bc8b254209345cbe9f1 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 12 Feb 2021 17:31:37 +0000 +Subject: [PATCH] drm/vc4: Change the default DPI format to being + 18bpp, not 24. + +DPI hasn't really been used up until now, so the default has +been meaningless. +In theory we should be able to pass the desired format for the +adjacent bridge chip through, but framework seems to be missing +for that. + +As the main device to use DPI is the VGA666 or Adafruit Kippah, +both of which use RGB666, change the default to being RGB666 instead +of RGB888. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_dpi.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_dpi.c ++++ b/drivers/gpu/drm/vc4/vc4_dpi.c +@@ -150,8 +150,8 @@ static void vc4_dpi_encoder_enable(struc + } + drm_connector_list_iter_end(&conn_iter); + +- /* Default to 24bit if no connector or format found. */ +- dpi_c |= VC4_SET_FIELD(DPI_FORMAT_24BIT_888_RGB, DPI_FORMAT); ++ /* Default to 18bit if no connector or format found. */ ++ dpi_c |= VC4_SET_FIELD(DPI_FORMAT_18BIT_666_RGB_1, DPI_FORMAT); + + if (connector) { + if (connector->display_info.num_bus_formats) { diff --git a/target/linux/bcm27xx/patches-6.1/950-0005-drm-atomic-Don-t-fixup-modes-that-haven-t-been-reset.patch b/target/linux/bcm27xx/patches-6.1/950-0005-drm-atomic-Don-t-fixup-modes-that-haven-t-been-reset.patch new file mode 100644 index 0000000000..0de0b474f3 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0005-drm-atomic-Don-t-fixup-modes-that-haven-t-been-reset.patch @@ -0,0 +1,24 @@ +From 5e5243cf497ccec7265b79cf84beb0f60550e113 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 7 Jan 2021 16:30:55 +0000 +Subject: [PATCH] drm/atomic: Don't fixup modes that haven't been reset + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/drm_atomic_helper.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/gpu/drm/drm_atomic_helper.c ++++ b/drivers/gpu/drm/drm_atomic_helper.c +@@ -438,6 +438,11 @@ mode_fixup(struct drm_atomic_state *stat + new_crtc_state = + drm_atomic_get_new_crtc_state(state, new_conn_state->crtc); + ++ if (!new_crtc_state->mode_changed && ++ !new_crtc_state->connectors_changed) { ++ continue; ++ } ++ + /* + * Each encoder has at most one connector (since we always steal + * it away), so we won't call ->mode_fixup twice. diff --git a/target/linux/bcm27xx/patches-6.1/950-0006-drm-vc4-Fix-timings-for-VEC-modes.patch b/target/linux/bcm27xx/patches-6.1/950-0006-drm-vc4-Fix-timings-for-VEC-modes.patch new file mode 100644 index 0000000000..bc5643ee77 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0006-drm-vc4-Fix-timings-for-VEC-modes.patch @@ -0,0 +1,127 @@ +From 607f72974246d1495059932286b3d5307c1645a5 Mon Sep 17 00:00:00 2001 +From: Mateusz Kwiatkowski +Date: Thu, 15 Jul 2021 01:07:30 +0200 +Subject: [PATCH] drm/vc4: Fix timings for VEC modes + +This commit fixes vertical timings of the VEC (composite output) modes +to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R +standards. + +Previous timings were actually defined as 502 and 601 lines, resulting +in non-standard 62.69 Hz and 52 Hz signals being generated, +respectively. + +Changes to vc4_crtc.c have also been made, to make the PixelValve +vertical timings accurately correspond to the DRM modeline in interlaced +modes. The resulting VERTA/VERTB register values have been verified +against the reference values set by the Raspberry Pi firmware. + +Signed-off-by: Mateusz Kwiatkowski +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 70 +++++++++++++++++++++------------- + 1 file changed, 43 insertions(+), 27 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -326,8 +326,14 @@ static void vc4_crtc_config_pv(struct dr + bool is_dsi = (vc4_encoder->type == VC4_ENCODER_TYPE_DSI0 || + vc4_encoder->type == VC4_ENCODER_TYPE_DSI1); + bool is_dsi1 = vc4_encoder->type == VC4_ENCODER_TYPE_DSI1; ++ bool is_vec = vc4_encoder->type == VC4_ENCODER_TYPE_VEC; + u32 format = is_dsi1 ? PV_CONTROL_FORMAT_DSIV_24 : PV_CONTROL_FORMAT_24; + u8 ppc = pv_data->pixels_per_clock; ++ ++ u16 vert_bp = mode->crtc_vtotal - mode->crtc_vsync_end; ++ u16 vert_sync = mode->crtc_vsync_end - mode->crtc_vsync_start; ++ u16 vert_fp = mode->crtc_vsync_start - mode->crtc_vdisplay; ++ + bool debug_dump_regs = false; + int idx; + +@@ -355,49 +361,59 @@ static void vc4_crtc_config_pv(struct dr + VC4_SET_FIELD(mode->hdisplay * pixel_rep / ppc, + PV_HORZB_HACTIVE)); + +- CRTC_WRITE(PV_VERTA, +- VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end + +- interlace, +- PV_VERTA_VBP) | +- VC4_SET_FIELD(mode->crtc_vsync_end - mode->crtc_vsync_start, +- PV_VERTA_VSYNC)); +- CRTC_WRITE(PV_VERTB, +- VC4_SET_FIELD(mode->crtc_vsync_start - mode->crtc_vdisplay, +- PV_VERTB_VFP) | +- VC4_SET_FIELD(mode->crtc_vdisplay, PV_VERTB_VACTIVE)); +- + if (interlace) { ++ bool odd_field_first = false; ++ u32 field_delay = mode->htotal * pixel_rep / (2 * ppc); ++ u16 vert_bp_even = vert_bp; ++ u16 vert_fp_even = vert_fp; ++ ++ if (is_vec) { ++ /* VEC (composite output) */ ++ ++field_delay; ++ if (mode->htotal == 858) { ++ /* 525-line mode (NTSC or PAL-M) */ ++ odd_field_first = true; ++ } ++ } ++ ++ if (odd_field_first) ++ ++vert_fp_even; ++ else ++ ++vert_bp; ++ + CRTC_WRITE(PV_VERTA_EVEN, +- VC4_SET_FIELD(mode->crtc_vtotal - +- mode->crtc_vsync_end, +- PV_VERTA_VBP) | +- VC4_SET_FIELD(mode->crtc_vsync_end - +- mode->crtc_vsync_start, +- PV_VERTA_VSYNC)); ++ VC4_SET_FIELD(vert_bp_even, PV_VERTA_VBP) | ++ VC4_SET_FIELD(vert_sync, PV_VERTA_VSYNC)); + CRTC_WRITE(PV_VERTB_EVEN, +- VC4_SET_FIELD(mode->crtc_vsync_start - +- mode->crtc_vdisplay, +- PV_VERTB_VFP) | ++ VC4_SET_FIELD(vert_fp_even, PV_VERTB_VFP) | + VC4_SET_FIELD(mode->crtc_vdisplay, PV_VERTB_VACTIVE)); + +- /* We set up first field even mode for HDMI. VEC's +- * NTSC mode would want first field odd instead, once +- * we support it (to do so, set ODD_FIRST and put the +- * delay in VSYNCD_EVEN instead). ++ /* We set up first field even mode for HDMI and VEC's PAL. ++ * For NTSC, we need first field odd. + */ + CRTC_WRITE(PV_V_CONTROL, + PV_VCONTROL_CONTINUOUS | + (is_dsi ? PV_VCONTROL_DSI : 0) | + PV_VCONTROL_INTERLACE | +- VC4_SET_FIELD(mode->htotal * pixel_rep / (2 * ppc), +- PV_VCONTROL_ODD_DELAY)); +- CRTC_WRITE(PV_VSYNCD_EVEN, 0); ++ (odd_field_first ++ ? PV_VCONTROL_ODD_FIRST ++ : VC4_SET_FIELD(field_delay, ++ PV_VCONTROL_ODD_DELAY))); ++ CRTC_WRITE(PV_VSYNCD_EVEN, ++ (odd_field_first ? field_delay : 0)); + } else { + CRTC_WRITE(PV_V_CONTROL, + PV_VCONTROL_CONTINUOUS | + (is_dsi ? PV_VCONTROL_DSI : 0)); + } + ++ CRTC_WRITE(PV_VERTA, ++ VC4_SET_FIELD(vert_bp, PV_VERTA_VBP) | ++ VC4_SET_FIELD(vert_sync, PV_VERTA_VSYNC)); ++ CRTC_WRITE(PV_VERTB, ++ VC4_SET_FIELD(vert_fp, PV_VERTB_VFP) | ++ VC4_SET_FIELD(mode->crtc_vdisplay, PV_VERTB_VACTIVE)); ++ + if (is_dsi) + CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep); + diff --git a/target/linux/bcm27xx/patches-6.1/950-0007-drm-vc4-Fix-definition-of-PAL-M-mode.patch b/target/linux/bcm27xx/patches-6.1/950-0007-drm-vc4-Fix-definition-of-PAL-M-mode.patch new file mode 100644 index 0000000000..b6345ee50b --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0007-drm-vc4-Fix-definition-of-PAL-M-mode.patch @@ -0,0 +1,77 @@ +From 5bcc290bd33f2b2fb7c6d7b30555b40b1074fd93 Mon Sep 17 00:00:00 2001 +From: Mateusz Kwiatkowski +Date: Thu, 15 Jul 2021 01:07:53 +0200 +Subject: [PATCH] drm/vc4: Fix definition of PAL-M mode + +PAL-M is a Brazilian analog TV standard that uses a PAL-style chroma +subcarrier at 3.575611[888111] MHz on top of 525-line (480i60) timings. +This commit makes the driver actually use the proper VEC preset for this +mode instead of just changing PAL subcarrier frequency. + +DRM mode constant names have also been changed, as they no longer +correspond to the "NTSC" or "PAL" terms. + +Signed-off-by: Mateusz Kwiatkowski +--- + drivers/gpu/drm/vc4/vc4_vec.c | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_vec.c ++++ b/drivers/gpu/drm/vc4/vc4_vec.c +@@ -69,6 +69,7 @@ + #define VEC_CONFIG0_STD_MASK GENMASK(1, 0) + #define VEC_CONFIG0_NTSC_STD 0 + #define VEC_CONFIG0_PAL_BDGHI_STD 1 ++#define VEC_CONFIG0_PAL_M_STD 2 + #define VEC_CONFIG0_PAL_N_STD 3 + + #define VEC_SCHPH 0x108 +@@ -224,14 +225,14 @@ static const struct debugfs_reg32 vec_re + VC4_REG32(VEC_DAC_MISC), + }; + +-static const struct drm_display_mode ntsc_mode = { ++static const struct drm_display_mode drm_mode_480i = { + DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500, + 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0, + 480, 480 + 7, 480 + 7 + 6, 525, 0, + DRM_MODE_FLAG_INTERLACE) + }; + +-static const struct drm_display_mode pal_mode = { ++static const struct drm_display_mode drm_mode_576i = { + DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500, + 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0, + 576, 576 + 4, 576 + 4 + 6, 625, 0, +@@ -240,25 +241,24 @@ static const struct drm_display_mode pal + + static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = { + [VC4_VEC_TV_MODE_NTSC] = { +- .mode = &ntsc_mode, ++ .mode = &drm_mode_480i, + .config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, + [VC4_VEC_TV_MODE_NTSC_J] = { +- .mode = &ntsc_mode, ++ .mode = &drm_mode_480i, + .config0 = VEC_CONFIG0_NTSC_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, + [VC4_VEC_TV_MODE_PAL] = { +- .mode = &pal_mode, ++ .mode = &drm_mode_576i, + .config0 = VEC_CONFIG0_PAL_BDGHI_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, + [VC4_VEC_TV_MODE_PAL_M] = { +- .mode = &pal_mode, +- .config0 = VEC_CONFIG0_PAL_BDGHI_STD, +- .config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ, +- .custom_freq = 0x223b61d1, ++ .mode = &drm_mode_480i, ++ .config0 = VEC_CONFIG0_PAL_M_STD, ++ .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, + }; + diff --git a/target/linux/bcm27xx/patches-6.1/950-0008-drm-vc4-Add-support-for-more-analog-TV-standards.patch b/target/linux/bcm27xx/patches-6.1/950-0008-drm-vc4-Add-support-for-more-analog-TV-standards.patch new file mode 100644 index 0000000000..e1c9170a55 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0008-drm-vc4-Add-support-for-more-analog-TV-standards.patch @@ -0,0 +1,148 @@ +From 5040ce6a1488fb6bf43d10172e0209c13de99a80 Mon Sep 17 00:00:00 2001 +From: Mateusz Kwiatkowski +Date: Thu, 15 Jul 2021 01:07:58 +0200 +Subject: [PATCH] drm/vc4: Add support for more analog TV standards + +Add support for the following composite output modes (all of them are +somewhat more obscure than the previously defined ones): + +- NTSC_443 - NTSC-style signal with the chroma subcarrier shifted to + 4.43361875 MHz (the PAL subcarrier frequency). Never used for + broadcasting, but sometimes used as a hack to play NTSC content in PAL + regions (e.g. on VCRs). +- PAL_N - PAL with alternative chroma subcarrier frequency, + 3.58205625 MHz. Used as a broadcast standard in Argentina, Paraguay + and Uruguay to fit 576i50 with colour in 6 MHz channel raster. +- PAL60 - 480i60 signal with PAL-style color at normal European PAL + frequency. Another non-standard, non-broadcast mode, used in similar + contexts as NTSC_443. Some displays support one but not the other. +- SECAM - French frequency-modulated analog color standard; also have + been broadcast in Eastern Europe and various parts of Africa and Asia. + Uses the same 576i50 timings as PAL. + +Also added some comments explaining color subcarrier frequency +registers. + +Signed-off-by: Mateusz Kwiatkowski +--- + drivers/gpu/drm/vc4/vc4_vec.c | 63 +++++++++++++++++++++++++++++++++++ + 1 file changed, 63 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_vec.c ++++ b/drivers/gpu/drm/vc4/vc4_vec.c +@@ -46,6 +46,7 @@ + #define VEC_CONFIG0_YDEL(x) ((x) << 26) + #define VEC_CONFIG0_CDEL_MASK GENMASK(25, 24) + #define VEC_CONFIG0_CDEL(x) ((x) << 24) ++#define VEC_CONFIG0_SECAM_STD BIT(21) + #define VEC_CONFIG0_PBPR_FIL BIT(18) + #define VEC_CONFIG0_CHROMA_GAIN_MASK GENMASK(17, 16) + #define VEC_CONFIG0_CHROMA_GAIN_UNITY (0 << 16) +@@ -76,6 +77,27 @@ + #define VEC_SOFT_RESET 0x10c + #define VEC_CLMP0_START 0x144 + #define VEC_CLMP0_END 0x148 ++ ++/* ++ * These set the color subcarrier frequency ++ * if VEC_CONFIG1_CUSTOM_FREQ is enabled. ++ * ++ * VEC_FREQ1_0 contains the most significant 16-bit half-word, ++ * VEC_FREQ3_2 contains the least significant 16-bit half-word. ++ * 0x80000000 seems to be equivalent to the pixel clock ++ * (which itself is the VEC clock divided by 8). ++ * ++ * Reference values (with the default pixel clock of 13.5 MHz): ++ * ++ * NTSC (3579545.[45] Hz) - 0x21F07C1F ++ * PAL (4433618.75 Hz) - 0x2A098ACB ++ * PAL-M (3575611.[888111] Hz) - 0x21E6EFE3 ++ * PAL-N (3582056.25 Hz) - 0x21F69446 ++ * ++ * NOTE: For SECAM, it is used as the Dr center frequency, ++ * regardless of whether VEC_CONFIG1_CUSTOM_FREQ is enabled or not; ++ * that is specified as 4406250 Hz, which corresponds to 0x29C71C72. ++ */ + #define VEC_FREQ3_2 0x180 + #define VEC_FREQ1_0 0x184 + +@@ -118,6 +140,14 @@ + + #define VEC_INTERRUPT_CONTROL 0x190 + #define VEC_INTERRUPT_STATUS 0x194 ++ ++/* ++ * Db center frequency for SECAM; the clock for this is the same as for ++ * VEC_FREQ3_2/VEC_FREQ1_0, which is used for Dr center frequency. ++ * ++ * This is specified as 4250000 Hz, which corresponds to 0x284BDA13. ++ * That is also the default value, so no need to set it explicitly. ++ */ + #define VEC_FCW_SECAM_B 0x198 + #define VEC_SECAM_GAIN_VAL 0x19c + +@@ -187,8 +217,12 @@ encoder_to_vc4_vec(struct drm_encoder *e + enum vc4_vec_tv_mode_id { + VC4_VEC_TV_MODE_NTSC, + VC4_VEC_TV_MODE_NTSC_J, ++ VC4_VEC_TV_MODE_NTSC_443, + VC4_VEC_TV_MODE_PAL, + VC4_VEC_TV_MODE_PAL_M, ++ VC4_VEC_TV_MODE_PAL_N, ++ VC4_VEC_TV_MODE_PAL60, ++ VC4_VEC_TV_MODE_SECAM, + }; + + struct vc4_vec_tv_mode { +@@ -250,6 +284,13 @@ static const struct vc4_vec_tv_mode vc4_ + .config0 = VEC_CONFIG0_NTSC_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, ++ [VC4_VEC_TV_MODE_NTSC_443] = { ++ /* NTSC with PAL chroma frequency */ ++ .mode = &drm_mode_480i, ++ .config0 = VEC_CONFIG0_NTSC_STD, ++ .config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ, ++ .custom_freq = 0x2a098acb, ++ }, + [VC4_VEC_TV_MODE_PAL] = { + .mode = &drm_mode_576i, + .config0 = VEC_CONFIG0_PAL_BDGHI_STD, +@@ -260,6 +301,24 @@ static const struct vc4_vec_tv_mode vc4_ + .config0 = VEC_CONFIG0_PAL_M_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, ++ [VC4_VEC_TV_MODE_PAL_N] = { ++ .mode = &drm_mode_576i, ++ .config0 = VEC_CONFIG0_PAL_N_STD, ++ .config1 = VEC_CONFIG1_C_CVBS_CVBS, ++ }, ++ [VC4_VEC_TV_MODE_PAL60] = { ++ /* PAL-M with chroma frequency of regular PAL */ ++ .mode = &drm_mode_480i, ++ .config0 = VEC_CONFIG0_PAL_M_STD, ++ .config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ, ++ .custom_freq = 0x2a098acb, ++ }, ++ [VC4_VEC_TV_MODE_SECAM] = { ++ .mode = &drm_mode_576i, ++ .config0 = VEC_CONFIG0_SECAM_STD, ++ .config1 = VEC_CONFIG1_C_CVBS_CVBS, ++ .custom_freq = 0x29c71c72, ++ }, + }; + + static enum drm_connector_status +@@ -503,8 +562,12 @@ static const struct of_device_id vc4_vec + static const char * const tv_mode_names[] = { + [VC4_VEC_TV_MODE_NTSC] = "NTSC", + [VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J", ++ [VC4_VEC_TV_MODE_NTSC_443] = "NTSC-443", + [VC4_VEC_TV_MODE_PAL] = "PAL", + [VC4_VEC_TV_MODE_PAL_M] = "PAL-M", ++ [VC4_VEC_TV_MODE_PAL_N] = "PAL-N", ++ [VC4_VEC_TV_MODE_PAL60] = "PAL60", ++ [VC4_VEC_TV_MODE_SECAM] = "SECAM", + }; + + static int vc4_vec_bind(struct device *dev, struct device *master, void *data) diff --git a/target/linux/bcm27xx/patches-6.1/950-0009-drm-vc4-Allow-setting-the-TV-norm-via-module-paramet.patch b/target/linux/bcm27xx/patches-6.1/950-0009-drm-vc4-Allow-setting-the-TV-norm-via-module-paramet.patch new file mode 100644 index 0000000000..cfdcf12d46 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0009-drm-vc4-Allow-setting-the-TV-norm-via-module-paramet.patch @@ -0,0 +1,143 @@ +From b5b92244feaa5b39a66fe0dace0d25d576079f0d Mon Sep 17 00:00:00 2001 +From: Mateusz Kwiatkowski +Date: Thu, 15 Jul 2021 01:08:01 +0200 +Subject: [PATCH] drm/vc4: Allow setting the TV norm via module + parameter + +Similar to the ch7006 and nouveau drivers, introduce a "tv_mode" module +parameter that allow setting the TV norm by specifying vc4.tv_norm= on +the kernel command line. + +If that is not specified, try inferring one of the most popular norms +(PAL or NTSC) from the video mode specified on the command line. On +Raspberry Pis, this causes the most common cases of the sdtv_mode +setting in config.txt to be respected. + +Signed-off-by: Mateusz Kwiatkowski +--- + drivers/gpu/drm/vc4/vc4_vec.c | 72 ++++++++++++++++++++++++++++------- + 1 file changed, 58 insertions(+), 14 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_vec.c ++++ b/drivers/gpu/drm/vc4/vc4_vec.c +@@ -67,7 +67,7 @@ + #define VEC_CONFIG0_YCDELAY BIT(4) + #define VEC_CONFIG0_RAMPEN BIT(2) + #define VEC_CONFIG0_YCDIS BIT(2) +-#define VEC_CONFIG0_STD_MASK GENMASK(1, 0) ++#define VEC_CONFIG0_STD_MASK (VEC_CONFIG0_SECAM_STD | GENMASK(1, 0)) + #define VEC_CONFIG0_NTSC_STD 0 + #define VEC_CONFIG0_PAL_BDGHI_STD 1 + #define VEC_CONFIG0_PAL_M_STD 2 +@@ -186,6 +186,8 @@ + #define VEC_DAC_MISC_DAC_RST_N BIT(0) + + ++static char *vc4_vec_tv_norm; ++ + struct vc4_vec_variant { + u32 dac_config; + }; +@@ -321,6 +323,44 @@ static const struct vc4_vec_tv_mode vc4_ + }, + }; + ++static const char * const tv_mode_names[] = { ++ [VC4_VEC_TV_MODE_NTSC] = "NTSC", ++ [VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J", ++ [VC4_VEC_TV_MODE_NTSC_443] = "NTSC-443", ++ [VC4_VEC_TV_MODE_PAL] = "PAL", ++ [VC4_VEC_TV_MODE_PAL_M] = "PAL-M", ++ [VC4_VEC_TV_MODE_PAL_N] = "PAL-N", ++ [VC4_VEC_TV_MODE_PAL60] = "PAL60", ++ [VC4_VEC_TV_MODE_SECAM] = "SECAM", ++}; ++ ++enum vc4_vec_tv_mode_id ++vc4_vec_get_default_mode(struct drm_connector *connector) ++{ ++ int i; ++ ++ if (vc4_vec_tv_norm) { ++ for (i = 0; i < ARRAY_SIZE(tv_mode_names); i++) ++ if (strcmp(vc4_vec_tv_norm, tv_mode_names[i]) == 0) ++ return (enum vc4_vec_tv_mode_id) i; ++ } else if (connector->cmdline_mode.specified && ++ ((connector->cmdline_mode.refresh_specified && ++ (connector->cmdline_mode.refresh == 25 || ++ connector->cmdline_mode.refresh == 50)) || ++ (!connector->cmdline_mode.refresh_specified && ++ (connector->cmdline_mode.yres == 288 || ++ connector->cmdline_mode.yres == 576)))) { ++ /* ++ * no explicitly specified TV norm; use PAL if a mode that ++ * looks like PAL has been specified on the command line ++ */ ++ return VC4_VEC_TV_MODE_PAL; ++ } ++ ++ /* in all other cases, default to NTSC */ ++ return VC4_VEC_TV_MODE_NTSC; ++} ++ + static enum drm_connector_status + vc4_vec_connector_detect(struct drm_connector *connector, bool force) + { +@@ -344,10 +384,18 @@ static int vc4_vec_connector_get_modes(s + return 1; + } + ++static void vc4_vec_connector_reset(struct drm_connector *connector) ++{ ++ drm_atomic_helper_connector_reset(connector); ++ /* preserve TV standard */ ++ if (connector->state) ++ connector->state->tv.mode = vc4_vec_get_default_mode(connector); ++} ++ + static const struct drm_connector_funcs vc4_vec_connector_funcs = { + .detect = vc4_vec_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, +- .reset = drm_atomic_helper_connector_reset, ++ .reset = vc4_vec_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, + }; +@@ -372,7 +420,7 @@ static int vc4_vec_connector_init(struct + + drm_object_attach_property(&connector->base, + dev->mode_config.tv_mode_property, +- VC4_VEC_TV_MODE_NTSC); ++ vc4_vec_get_default_mode(connector)); + + drm_connector_attach_encoder(connector, &vec->encoder.base); + +@@ -559,17 +607,6 @@ static const struct of_device_id vc4_vec + { /* sentinel */ }, + }; + +-static const char * const tv_mode_names[] = { +- [VC4_VEC_TV_MODE_NTSC] = "NTSC", +- [VC4_VEC_TV_MODE_NTSC_J] = "NTSC-J", +- [VC4_VEC_TV_MODE_NTSC_443] = "NTSC-443", +- [VC4_VEC_TV_MODE_PAL] = "PAL", +- [VC4_VEC_TV_MODE_PAL_M] = "PAL-M", +- [VC4_VEC_TV_MODE_PAL_N] = "PAL-N", +- [VC4_VEC_TV_MODE_PAL60] = "PAL60", +- [VC4_VEC_TV_MODE_SECAM] = "SECAM", +-}; +- + static int vc4_vec_bind(struct device *dev, struct device *master, void *data) + { + struct platform_device *pdev = to_platform_device(dev); +@@ -650,3 +687,10 @@ struct platform_driver vc4_vec_driver = + .of_match_table = vc4_vec_dt_match, + }, + }; ++ ++module_param_named(tv_norm, vc4_vec_tv_norm, charp, 0600); ++MODULE_PARM_DESC(tv_norm, "Default TV norm.\n" ++ "\t\tSupported: NTSC, NTSC-J, NTSC-443, PAL, PAL-M, PAL-N,\n" ++ "\t\t\tPAL60, SECAM.\n" ++ "\t\tDefault: PAL if a 50 Hz mode has been set via video=,\n" ++ "\t\t\tNTSC otherwise"); diff --git a/target/linux/bcm27xx/patches-6.1/950-0010-drm-vc4-Refactor-mode-checking-logic.patch b/target/linux/bcm27xx/patches-6.1/950-0010-drm-vc4-Refactor-mode-checking-logic.patch new file mode 100644 index 0000000000..ca67a9c4cd --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0010-drm-vc4-Refactor-mode-checking-logic.patch @@ -0,0 +1,82 @@ +From 3246c9abe5f4358cc5c60b8621485faa9883d06b Mon Sep 17 00:00:00 2001 +From: Mateusz Kwiatkowski +Date: Thu, 15 Jul 2021 01:08:05 +0200 +Subject: [PATCH] drm/vc4: Refactor mode checking logic + +Replace drm_encoder_helper_funcs::atomic_check with +drm_connector_helper_funcs::atomic_check - the former is not called +during drm_mode_obj_set_property_ioctl(). Set crtc_state->mode_changed +if TV norm changes even without explicit mode change. This makes things +like "xrandr --output Composite-1 --set mode PAL-M" work properly. + +Signed-off-by: Mateusz Kwiatkowski +--- + drivers/gpu/drm/vc4/vc4_vec.c | 42 ++++++++++++++++++++++------------- + 1 file changed, 26 insertions(+), 16 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_vec.c ++++ b/drivers/gpu/drm/vc4/vc4_vec.c +@@ -392,6 +392,31 @@ static void vc4_vec_connector_reset(stru + connector->state->tv.mode = vc4_vec_get_default_mode(connector); + } + ++static int vc4_vec_connector_atomic_check(struct drm_connector *conn, ++ struct drm_atomic_state *state) ++{ ++ struct drm_connector_state *old_state = ++ drm_atomic_get_old_connector_state(state, conn); ++ struct drm_connector_state *new_state = ++ drm_atomic_get_new_connector_state(state, conn); ++ ++ const struct vc4_vec_tv_mode *vec_mode = ++ &vc4_vec_tv_modes[new_state->tv.mode]; ++ ++ if (new_state->crtc) { ++ struct drm_crtc_state *crtc_state = ++ drm_atomic_get_new_crtc_state(state, new_state->crtc); ++ ++ if (!drm_mode_equal(vec_mode->mode, &crtc_state->mode)) ++ return -EINVAL; ++ ++ if (old_state->tv.mode != new_state->tv.mode) ++ crtc_state->mode_changed = true; ++ } ++ ++ return 0; ++} ++ + static const struct drm_connector_funcs vc4_vec_connector_funcs = { + .detect = vc4_vec_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, +@@ -402,6 +427,7 @@ static const struct drm_connector_funcs + + static const struct drm_connector_helper_funcs vc4_vec_connector_helper_funcs = { + .get_modes = vc4_vec_connector_get_modes, ++ .atomic_check = vc4_vec_connector_atomic_check, + }; + + static int vc4_vec_connector_init(struct drm_device *dev, struct vc4_vec *vec) +@@ -550,23 +576,7 @@ err_dev_exit: + drm_dev_exit(idx); + } + +-static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder, +- struct drm_crtc_state *crtc_state, +- struct drm_connector_state *conn_state) +-{ +- const struct vc4_vec_tv_mode *vec_mode; +- +- vec_mode = &vc4_vec_tv_modes[conn_state->tv.mode]; +- +- if (conn_state->crtc && +- !drm_mode_equal(vec_mode->mode, &crtc_state->adjusted_mode)) +- return -EINVAL; +- +- return 0; +-} +- + static const struct drm_encoder_helper_funcs vc4_vec_encoder_helper_funcs = { +- .atomic_check = vc4_vec_encoder_atomic_check, + .atomic_disable = vc4_vec_encoder_disable, + .atomic_enable = vc4_vec_encoder_enable, + }; diff --git a/target/linux/bcm27xx/patches-6.1/950-0011-drm-vc4-Add-firmware-kms-mode.patch b/target/linux/bcm27xx/patches-6.1/950-0011-drm-vc4-Add-firmware-kms-mode.patch new file mode 100644 index 0000000000..b01a78c015 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0011-drm-vc4-Add-firmware-kms-mode.patch @@ -0,0 +1,2476 @@ +From 2f74e0d6dd9f545a3b1dcc8d3cdf0ccf55a6f7d0 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 7 Sep 2020 17:32:27 +0100 +Subject: [PATCH] drm/vc4: Add firmware-kms mode + +This is a squash of all firmware-kms related patches from previous +branches, up to and including +"drm/vc4: Set the possible crtcs mask correctly for planes with FKMS" +plus a couple of minor fixups for the 5.9 branch. +Please refer to earlier branches for full history. + +This patch includes work by Eric Anholt, James Hughes, Phil Elwell, +Dave Stevenson, Dom Cobley, and Jonathon Bell. + +Signed-off-by: Dave Stevenson + +drm/vc4: Fixup firmware-kms after "drm/atomic: Pass the full state to CRTC atomic enable/disable" + +Prototype for those calls changed, so amend fkms (which isn't +upstream) to match. + +Signed-off-by: Dave Stevenson + +drm/vc4: Fixup fkms for API change + +Atomic flush and check changed API, so fix up the downstream-only +FKMS driver. + +Signed-off-by: Dave Stevenson + +drm/vc4: Make normalize_zpos conditional on using fkms + +Eric's view was that there was no point in having zpos +support on vc4 as all the planes had the same functionality. + +Can be later squashed into (and fixes): +drm/vc4: Add firmware-kms mode + +Signed-off-by: Dom Cobley + +drm/vc4: FKMS: Change of Broadcast RGB mode needs a mode change + +The Broadcast RGB (aka HDMI limited/full range) property is only +notified to the firmware on mode change, so this needs to be +signalled when set. + +https://github.com/raspberrypi/firmware/issues/1580 + +Signed-off-by: Dave Stevenson + +vc4/drv: Only notify firmware of display done with kms + +fkms driver still wants firmware display to be active + +Signed-off-by: Dom Cobley + +ydrm/vc4: fkms: Fix margin calculations for the right/bottom edges + +The calculations clipped the right/bottom edge of the clipped +range based on the left/top margins. + +https://github.com/raspberrypi/linux/issues/4447 + +Signed-off-by: Dave Stevenson + +drm/vc4: fkms: Use new devm_rpi_firmware_get api + +drm/kms: Add allow_fb_modifiers + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/Makefile | 1 + + drivers/gpu/drm/vc4/vc4_debugfs.c | 3 +- + drivers/gpu/drm/vc4/vc4_drv.c | 29 +- + drivers/gpu/drm/vc4/vc4_drv.h | 7 + + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 1997 ++++++++++++++++++++++++ + drivers/gpu/drm/vc4/vc4_kms.c | 35 +- + drivers/gpu/drm/vc4/vc_image_types.h | 175 +++ + 7 files changed, 2233 insertions(+), 14 deletions(-) + create mode 100644 drivers/gpu/drm/vc4/vc4_firmware_kms.c + create mode 100644 drivers/gpu/drm/vc4/vc_image_types.h + +--- a/drivers/gpu/drm/vc4/Makefile ++++ b/drivers/gpu/drm/vc4/Makefile +@@ -9,6 +9,7 @@ vc4-y := \ + vc4_dpi.o \ + vc4_dsi.o \ + vc4_fence.o \ ++ vc4_firmware_kms.o \ + vc4_kms.o \ + vc4_gem.o \ + vc4_hdmi.o \ +--- a/drivers/gpu/drm/vc4/vc4_debugfs.c ++++ b/drivers/gpu/drm/vc4/vc4_debugfs.c +@@ -24,7 +24,8 @@ vc4_debugfs_init(struct drm_minor *minor + struct vc4_dev *vc4 = to_vc4_dev(minor->dev); + struct drm_device *drm = &vc4->base; + +- drm_WARN_ON(drm, vc4_hvs_debugfs_init(minor)); ++ if (vc4->hvs) ++ drm_WARN_ON(drm, vc4_hvs_debugfs_init(minor)); + + if (vc4->v3d) { + drm_WARN_ON(drm, vc4_bo_debugfs_init(minor)); +--- a/drivers/gpu/drm/vc4/vc4_drv.c ++++ b/drivers/gpu/drm/vc4/vc4_drv.c +@@ -284,6 +284,18 @@ static const struct of_device_id vc4_dma + {} + }; + ++/* ++ * we need this helper function for determining presence of fkms ++ * before it's been bound ++ */ ++static bool firmware_kms(void) ++{ ++ return of_device_is_available(of_find_compatible_node(NULL, NULL, ++ "raspberrypi,rpi-firmware-kms")) || ++ of_device_is_available(of_find_compatible_node(NULL, NULL, ++ "raspberrypi,rpi-firmware-kms-2711")); ++} ++ + static int vc4_drm_bind(struct device *dev) + { + struct platform_device *pdev = to_platform_device(dev); +@@ -357,7 +369,7 @@ static int vc4_drm_bind(struct device *d + if (ret) + return ret; + +- if (firmware) { ++ if (firmware && !firmware_kms()) { + ret = rpi_firmware_property(firmware, + RPI_FIRMWARE_NOTIFY_DISPLAY_DONE, + NULL, 0); +@@ -375,16 +387,20 @@ static int vc4_drm_bind(struct device *d + if (ret) + return ret; + +- ret = vc4_plane_create_additional_planes(drm); +- if (ret) +- goto unbind_all; ++ if (!vc4->firmware_kms) { ++ ret = vc4_plane_create_additional_planes(drm); ++ if (ret) ++ return ret; ++ } + + ret = vc4_kms_load(drm); + if (ret < 0) + goto unbind_all; + +- drm_for_each_crtc(crtc, drm) +- vc4_crtc_disable_at_boot(crtc); ++ if (!vc4->firmware_kms) { ++ drm_for_each_crtc(crtc, drm) ++ vc4_crtc_disable_at_boot(crtc); ++ } + + ret = drm_dev_register(drm, 0); + if (ret < 0) +@@ -428,6 +444,7 @@ static struct platform_driver *const com + &vc4_dsi_driver, + &vc4_txp_driver, + &vc4_crtc_driver, ++ &vc4_firmware_kms_driver, + &vc4_v3d_driver, + }; + +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -82,8 +82,12 @@ struct vc4_dev { + + unsigned int irq; + ++ bool firmware_kms; ++ struct rpi_firmware *firmware; ++ + struct vc4_hvs *hvs; + struct vc4_v3d *v3d; ++ struct vc4_fkms *fkms; + + struct vc4_hang_state *hang_state; + +@@ -905,6 +909,9 @@ extern struct platform_driver vc4_dsi_dr + /* vc4_fence.c */ + extern const struct dma_fence_ops vc4_fence_ops; + ++/* vc4_firmware_kms.c */ ++extern struct platform_driver vc4_firmware_kms_driver; ++ + /* vc4_gem.c */ + int vc4_gem_init(struct drm_device *dev); + int vc4_submit_cl_ioctl(struct drm_device *dev, void *data, +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -0,0 +1,1997 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++/* ++ * Copyright (C) 2016 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/** ++ * DOC: VC4 firmware KMS module. ++ * ++ * As a hack to get us from the current closed source driver world ++ * toward a totally open stack, implement KMS on top of the Raspberry ++ * Pi's firmware display stack. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include "vc4_drv.h" ++#include "vc4_regs.h" ++#include "vc_image_types.h" ++ ++int fkms_max_refresh_rate = 85; ++module_param(fkms_max_refresh_rate, int, 0644); ++MODULE_PARM_DESC(fkms_max_refresh_rate, "Max supported refresh rate"); ++ ++struct get_display_cfg { ++ u32 max_pixel_clock[2]; //Max pixel clock for each display ++}; ++ ++struct vc4_fkms { ++ struct get_display_cfg cfg; ++ bool bcm2711; ++}; ++ ++#define PLANES_PER_CRTC 8 ++ ++struct set_plane { ++ u8 display; ++ u8 plane_id; ++ u8 vc_image_type; ++ s8 layer; ++ ++ u16 width; ++ u16 height; ++ ++ u16 pitch; ++ u16 vpitch; ++ ++ u32 src_x; /* 16p16 */ ++ u32 src_y; /* 16p16 */ ++ ++ u32 src_w; /* 16p16 */ ++ u32 src_h; /* 16p16 */ ++ ++ s16 dst_x; ++ s16 dst_y; ++ ++ u16 dst_w; ++ u16 dst_h; ++ ++ u8 alpha; ++ u8 num_planes; ++ u8 is_vu; ++ u8 color_encoding; ++ ++ u32 planes[4]; /* DMA address of each plane */ ++ ++ u32 transform; ++}; ++ ++/* Values for the transform field */ ++#define TRANSFORM_NO_ROTATE 0 ++#define TRANSFORM_ROTATE_180 BIT(1) ++#define TRANSFORM_FLIP_HRIZ BIT(16) ++#define TRANSFORM_FLIP_VERT BIT(17) ++ ++struct mailbox_set_plane { ++ struct rpi_firmware_property_tag_header tag; ++ struct set_plane plane; ++}; ++ ++struct mailbox_blank_display { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 display; ++ struct rpi_firmware_property_tag_header tag2; ++ u32 blank; ++}; ++ ++struct mailbox_display_pwr { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 display; ++ u32 state; ++}; ++ ++struct mailbox_get_edid { ++ struct rpi_firmware_property_tag_header tag1; ++ u32 block; ++ u32 display_number; ++ u8 edid[128]; ++}; ++ ++struct set_timings { ++ u8 display; ++ u8 padding; ++ u16 video_id_code; ++ ++ u32 clock; /* in kHz */ ++ ++ u16 hdisplay; ++ u16 hsync_start; ++ ++ u16 hsync_end; ++ u16 htotal; ++ ++ u16 hskew; ++ u16 vdisplay; ++ ++ u16 vsync_start; ++ u16 vsync_end; ++ ++ u16 vtotal; ++ u16 vscan; ++ ++ u16 vrefresh; ++ u16 padding2; ++ ++ u32 flags; ++#define TIMINGS_FLAGS_H_SYNC_POS BIT(0) ++#define TIMINGS_FLAGS_H_SYNC_NEG 0 ++#define TIMINGS_FLAGS_V_SYNC_POS BIT(1) ++#define TIMINGS_FLAGS_V_SYNC_NEG 0 ++#define TIMINGS_FLAGS_INTERLACE BIT(2) ++ ++#define TIMINGS_FLAGS_ASPECT_MASK GENMASK(7, 4) ++#define TIMINGS_FLAGS_ASPECT_NONE (0 << 4) ++#define TIMINGS_FLAGS_ASPECT_4_3 (1 << 4) ++#define TIMINGS_FLAGS_ASPECT_16_9 (2 << 4) ++#define TIMINGS_FLAGS_ASPECT_64_27 (3 << 4) ++#define TIMINGS_FLAGS_ASPECT_256_135 (4 << 4) ++ ++/* Limited range RGB flag. Not set corresponds to full range. */ ++#define TIMINGS_FLAGS_RGB_LIMITED BIT(8) ++/* DVI monitor, therefore disable infoframes. Not set corresponds to HDMI. */ ++#define TIMINGS_FLAGS_DVI BIT(9) ++/* Double clock */ ++#define TIMINGS_FLAGS_DBL_CLK BIT(10) ++}; ++ ++struct mailbox_set_mode { ++ struct rpi_firmware_property_tag_header tag1; ++ struct set_timings timings; ++}; ++ ++static const struct vc_image_format { ++ u32 drm; /* DRM_FORMAT_* */ ++ u32 vc_image; /* VC_IMAGE_* */ ++ u32 is_vu; ++} vc_image_formats[] = { ++ { ++ .drm = DRM_FORMAT_XRGB8888, ++ .vc_image = VC_IMAGE_XRGB8888, ++ }, ++ { ++ .drm = DRM_FORMAT_ARGB8888, ++ .vc_image = VC_IMAGE_ARGB8888, ++ }, ++/* ++ * FIXME: Need to resolve which DRM format goes to which vc_image format ++ * for the remaining RGBA and RGBX formats. ++ * { ++ * .drm = DRM_FORMAT_ABGR8888, ++ * .vc_image = VC_IMAGE_RGBA8888, ++ * }, ++ * { ++ * .drm = DRM_FORMAT_XBGR8888, ++ * .vc_image = VC_IMAGE_RGBA8888, ++ * }, ++ */ ++ { ++ .drm = DRM_FORMAT_RGB565, ++ .vc_image = VC_IMAGE_RGB565, ++ }, ++ { ++ .drm = DRM_FORMAT_RGB888, ++ .vc_image = VC_IMAGE_BGR888, ++ }, ++ { ++ .drm = DRM_FORMAT_BGR888, ++ .vc_image = VC_IMAGE_RGB888, ++ }, ++ { ++ .drm = DRM_FORMAT_YUV422, ++ .vc_image = VC_IMAGE_YUV422PLANAR, ++ }, ++ { ++ .drm = DRM_FORMAT_YUV420, ++ .vc_image = VC_IMAGE_YUV420, ++ }, ++ { ++ .drm = DRM_FORMAT_YVU420, ++ .vc_image = VC_IMAGE_YUV420, ++ .is_vu = 1, ++ }, ++ { ++ .drm = DRM_FORMAT_NV12, ++ .vc_image = VC_IMAGE_YUV420SP, ++ }, ++ { ++ .drm = DRM_FORMAT_NV21, ++ .vc_image = VC_IMAGE_YUV420SP, ++ .is_vu = 1, ++ }, ++ { ++ .drm = DRM_FORMAT_P030, ++ .vc_image = VC_IMAGE_YUV10COL, ++ }, ++}; ++ ++static const struct vc_image_format *vc4_get_vc_image_fmt(u32 drm_format) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < ARRAY_SIZE(vc_image_formats); i++) { ++ if (vc_image_formats[i].drm == drm_format) ++ return &vc_image_formats[i]; ++ } ++ ++ return NULL; ++} ++ ++/* The firmware delivers a vblank interrupt to us through the SMI ++ * hardware, which has only this one register. ++ */ ++#define SMICS 0x0 ++#define SMIDSW0 0x14 ++#define SMIDSW1 0x1C ++#define SMICS_INTERRUPTS (BIT(9) | BIT(10) | BIT(11)) ++ ++/* Flag to denote that the firmware is giving multiple display callbacks */ ++#define SMI_NEW 0xabcd0000 ++ ++#define vc4_crtc vc4_kms_crtc ++#define to_vc4_crtc to_vc4_kms_crtc ++struct vc4_crtc { ++ struct drm_crtc base; ++ struct drm_encoder *encoder; ++ struct drm_connector *connector; ++ void __iomem *regs; ++ ++ struct drm_pending_vblank_event *event; ++ bool vblank_enabled; ++ u32 display_number; ++ u32 display_type; ++}; ++ ++static inline struct vc4_crtc *to_vc4_crtc(struct drm_crtc *crtc) ++{ ++ return container_of(crtc, struct vc4_crtc, base); ++} ++ ++struct vc4_fkms_encoder { ++ struct drm_encoder base; ++ bool hdmi_monitor; ++ bool rgb_range_selectable; ++ int display_num; ++}; ++ ++static inline struct vc4_fkms_encoder * ++to_vc4_fkms_encoder(struct drm_encoder *encoder) ++{ ++ return container_of(encoder, struct vc4_fkms_encoder, base); ++} ++ ++/* "Broadcast RGB" property. ++ * Allows overriding of HDMI full or limited range RGB ++ */ ++#define VC4_BROADCAST_RGB_AUTO 0 ++#define VC4_BROADCAST_RGB_FULL 1 ++#define VC4_BROADCAST_RGB_LIMITED 2 ++ ++/* VC4 FKMS connector KMS struct */ ++struct vc4_fkms_connector { ++ struct drm_connector base; ++ ++ /* Since the connector is attached to just the one encoder, ++ * this is the reference to it so we can do the best_encoder() ++ * hook. ++ */ ++ struct drm_encoder *encoder; ++ struct vc4_dev *vc4_dev; ++ u32 display_number; ++ u32 display_type; ++ ++ struct drm_property *broadcast_rgb_property; ++}; ++ ++static inline struct vc4_fkms_connector * ++to_vc4_fkms_connector(struct drm_connector *connector) ++{ ++ return container_of(connector, struct vc4_fkms_connector, base); ++} ++ ++/* VC4 FKMS connector state */ ++struct vc4_fkms_connector_state { ++ struct drm_connector_state base; ++ ++ int broadcast_rgb; ++}; ++ ++#define to_vc4_fkms_connector_state(x) \ ++ container_of(x, struct vc4_fkms_connector_state, base) ++ ++static u32 vc4_get_display_type(u32 display_number) ++{ ++ const u32 display_types[] = { ++ /* The firmware display (DispmanX) IDs map to specific types in ++ * a fixed manner. ++ */ ++ DRM_MODE_ENCODER_DSI, /* MAIN_LCD - DSI or DPI */ ++ DRM_MODE_ENCODER_DSI, /* AUX_LCD */ ++ DRM_MODE_ENCODER_TMDS, /* HDMI0 */ ++ DRM_MODE_ENCODER_TVDAC, /* VEC */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_LCD */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_TV */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_OTHER */ ++ DRM_MODE_ENCODER_TMDS, /* HDMI1 */ ++ DRM_MODE_ENCODER_NONE, /* FORCE_TV2 */ ++ }; ++ return display_number > ARRAY_SIZE(display_types) - 1 ? ++ DRM_MODE_ENCODER_NONE : display_types[display_number]; ++} ++ ++/* Firmware's structure for making an FB mbox call. */ ++struct fbinfo_s { ++ u32 xres, yres, xres_virtual, yres_virtual; ++ u32 pitch, bpp; ++ u32 xoffset, yoffset; ++ u32 base; ++ u32 screen_size; ++ u16 cmap[256]; ++}; ++ ++struct vc4_fkms_plane { ++ struct drm_plane base; ++ struct fbinfo_s *fbinfo; ++ dma_addr_t fbinfo_bus_addr; ++ u32 pitch; ++ struct mailbox_set_plane mb; ++}; ++ ++static inline struct vc4_fkms_plane *to_vc4_fkms_plane(struct drm_plane *plane) ++{ ++ return (struct vc4_fkms_plane *)plane; ++} ++ ++static int vc4_plane_set_blank(struct drm_plane *plane, bool blank) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(plane->dev); ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ struct mailbox_set_plane blank_mb = { ++ .tag = { RPI_FIRMWARE_SET_PLANE, sizeof(struct set_plane), 0 }, ++ .plane = { ++ .display = vc4_plane->mb.plane.display, ++ .plane_id = vc4_plane->mb.plane.plane_id, ++ } ++ }; ++ static const char * const plane_types[] = { ++ "overlay", ++ "primary", ++ "cursor" ++ }; ++ int ret; ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] %s plane %s", ++ plane->base.id, plane->name, plane_types[plane->type], ++ blank ? "blank" : "unblank"); ++ ++ if (blank) ++ ret = rpi_firmware_property_list(vc4->firmware, &blank_mb, ++ sizeof(blank_mb)); ++ else ++ ret = rpi_firmware_property_list(vc4->firmware, &vc4_plane->mb, ++ sizeof(vc4_plane->mb)); ++ ++ WARN_ONCE(ret, "%s: firmware call failed. Please update your firmware", ++ __func__); ++ return ret; ++} ++ ++static void vc4_fkms_crtc_get_margins(struct drm_crtc_state *state, ++ unsigned int *left, unsigned int *right, ++ unsigned int *top, unsigned int *bottom) ++{ ++ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state); ++ struct drm_connector_state *conn_state; ++ struct drm_connector *conn; ++ int i; ++ ++ *left = vc4_state->margins.left; ++ *right = vc4_state->margins.right; ++ *top = vc4_state->margins.top; ++ *bottom = vc4_state->margins.bottom; ++ ++ /* We have to interate over all new connector states because ++ * vc4_fkms_crtc_get_margins() might be called before ++ * vc4_fkms_crtc_atomic_check() which means margins info in ++ * vc4_crtc_state might be outdated. ++ */ ++ for_each_new_connector_in_state(state->state, conn, conn_state, i) { ++ if (conn_state->crtc != state->crtc) ++ continue; ++ ++ *left = conn_state->tv.margins.left; ++ *right = conn_state->tv.margins.right; ++ *top = conn_state->tv.margins.top; ++ *bottom = conn_state->tv.margins.bottom; ++ break; ++ } ++} ++ ++static int vc4_fkms_margins_adj(struct drm_plane_state *pstate, ++ struct set_plane *plane) ++{ ++ unsigned int left, right, top, bottom; ++ int adjhdisplay, adjvdisplay; ++ struct drm_crtc_state *crtc_state; ++ ++ crtc_state = drm_atomic_get_new_crtc_state(pstate->state, ++ pstate->crtc); ++ ++ vc4_fkms_crtc_get_margins(crtc_state, &left, &right, &top, &bottom); ++ ++ if (!left && !right && !top && !bottom) ++ return 0; ++ ++ if (left + right >= crtc_state->mode.hdisplay || ++ top + bottom >= crtc_state->mode.vdisplay) ++ return -EINVAL; ++ ++ adjhdisplay = crtc_state->mode.hdisplay - (left + right); ++ plane->dst_x = DIV_ROUND_CLOSEST(plane->dst_x * adjhdisplay, ++ (int)crtc_state->mode.hdisplay); ++ plane->dst_x += left; ++ if (plane->dst_x > (int)(crtc_state->mode.hdisplay - right)) ++ plane->dst_x = crtc_state->mode.hdisplay - right; ++ ++ adjvdisplay = crtc_state->mode.vdisplay - (top + bottom); ++ plane->dst_y = DIV_ROUND_CLOSEST(plane->dst_y * adjvdisplay, ++ (int)crtc_state->mode.vdisplay); ++ plane->dst_y += top; ++ if (plane->dst_y > (int)(crtc_state->mode.vdisplay - bottom)) ++ plane->dst_y = crtc_state->mode.vdisplay - bottom; ++ ++ plane->dst_w = DIV_ROUND_CLOSEST(plane->dst_w * adjhdisplay, ++ crtc_state->mode.hdisplay); ++ plane->dst_h = DIV_ROUND_CLOSEST(plane->dst_h * adjvdisplay, ++ crtc_state->mode.vdisplay); ++ ++ if (!plane->dst_w || !plane->dst_h) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static void vc4_plane_atomic_update(struct drm_plane *plane, ++ struct drm_atomic_state *old_state) ++{ ++ struct drm_plane_state *state = plane->state; ++ ++ /* ++ * Do NOT set now, as we haven't checked if the crtc is active or not. ++ * Set from vc4_plane_set_blank instead. ++ * ++ * If the CRTC is on (or going to be on) and we're enabled, ++ * then unblank. Otherwise, stay blank until CRTC enable. ++ */ ++ if (state->crtc->state->active) ++ vc4_plane_set_blank(plane, false); ++} ++ ++static void vc4_plane_atomic_disable(struct drm_plane *plane, ++ struct drm_atomic_state *old_state) ++{ ++ struct drm_plane_state *state = plane->state; ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n", ++ plane->base.id, plane->name, ++ state->crtc_w, ++ state->crtc_h, ++ vc4_plane->mb.plane.vc_image_type, ++ state->crtc_x, ++ state->crtc_y); ++ vc4_plane_set_blank(plane, true); ++} ++ ++static bool plane_enabled(struct drm_plane_state *state) ++{ ++ return state->fb && state->crtc; ++} ++ ++static int vc4_plane_to_mb(struct drm_plane *plane, ++ struct mailbox_set_plane *mb, ++ struct drm_plane_state *state) ++{ ++ struct drm_framebuffer *fb = state->fb; ++ struct drm_gem_dma_object *bo = drm_fb_dma_get_gem_obj(fb, 0); ++ const struct drm_format_info *drm_fmt = fb->format; ++ const struct vc_image_format *vc_fmt = ++ vc4_get_vc_image_fmt(drm_fmt->format); ++ int num_planes = fb->format->num_planes; ++ unsigned int rotation; ++ ++ mb->plane.vc_image_type = vc_fmt->vc_image; ++ mb->plane.width = fb->width; ++ mb->plane.height = fb->height; ++ mb->plane.pitch = fb->pitches[0]; ++ mb->plane.src_w = state->src_w; ++ mb->plane.src_h = state->src_h; ++ mb->plane.src_x = state->src_x; ++ mb->plane.src_y = state->src_y; ++ mb->plane.dst_w = state->crtc_w; ++ mb->plane.dst_h = state->crtc_h; ++ mb->plane.dst_x = state->crtc_x; ++ mb->plane.dst_y = state->crtc_y; ++ mb->plane.alpha = state->alpha >> 8; ++ mb->plane.layer = state->normalized_zpos ? ++ state->normalized_zpos : -127; ++ mb->plane.num_planes = num_planes; ++ mb->plane.is_vu = vc_fmt->is_vu; ++ mb->plane.planes[0] = bo->dma_addr + fb->offsets[0]; ++ ++ rotation = drm_rotation_simplify(state->rotation, ++ DRM_MODE_ROTATE_0 | ++ DRM_MODE_REFLECT_X | ++ DRM_MODE_REFLECT_Y); ++ ++ mb->plane.transform = TRANSFORM_NO_ROTATE; ++ if (rotation & DRM_MODE_REFLECT_X) ++ mb->plane.transform |= TRANSFORM_FLIP_HRIZ; ++ if (rotation & DRM_MODE_REFLECT_Y) ++ mb->plane.transform |= TRANSFORM_FLIP_VERT; ++ ++ vc4_fkms_margins_adj(state, &mb->plane); ++ ++ if (num_planes > 1) { ++ /* Assume this must be YUV */ ++ /* Makes assumptions on the stride for the chroma planes as we ++ * can't easily plumb in non-standard pitches. ++ */ ++ mb->plane.planes[1] = bo->dma_addr + fb->offsets[1]; ++ if (num_planes > 2) ++ mb->plane.planes[2] = bo->dma_addr + fb->offsets[2]; ++ else ++ mb->plane.planes[2] = 0; ++ ++ /* Special case the YUV420 with U and V as line interleaved ++ * planes as we have special handling for that case. ++ */ ++ if (num_planes == 3 && ++ (fb->offsets[2] - fb->offsets[1]) == fb->pitches[1]) ++ mb->plane.vc_image_type = VC_IMAGE_YUV420_S; ++ ++ switch (state->color_encoding) { ++ default: ++ case DRM_COLOR_YCBCR_BT601: ++ if (state->color_range == DRM_COLOR_YCBCR_LIMITED_RANGE) ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT601; ++ else ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF; ++ break; ++ case DRM_COLOR_YCBCR_BT709: ++ /* Currently no support for a full range BT709 */ ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT709; ++ break; ++ case DRM_COLOR_YCBCR_BT2020: ++ /* Currently no support for a full range BT2020 */ ++ mb->plane.color_encoding = ++ VC_IMAGE_YUVINFO_CSC_REC_2020; ++ break; ++ } ++ } else { ++ mb->plane.planes[1] = 0; ++ mb->plane.planes[2] = 0; ++ } ++ mb->plane.planes[3] = 0; ++ ++ switch (fourcc_mod_broadcom_mod(fb->modifier)) { ++ case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: ++ switch (mb->plane.vc_image_type) { ++ case VC_IMAGE_XRGB8888: ++ mb->plane.vc_image_type = VC_IMAGE_TF_RGBX32; ++ break; ++ case VC_IMAGE_ARGB8888: ++ mb->plane.vc_image_type = VC_IMAGE_TF_RGBA32; ++ break; ++ case VC_IMAGE_RGB565: ++ mb->plane.vc_image_type = VC_IMAGE_TF_RGB565; ++ break; ++ } ++ break; ++ case DRM_FORMAT_MOD_BROADCOM_SAND128: ++ switch (mb->plane.vc_image_type) { ++ case VC_IMAGE_YUV420SP: ++ mb->plane.vc_image_type = VC_IMAGE_YUV_UV; ++ break; ++ /* VC_IMAGE_YUV10COL could be included in here, but it is only ++ * valid as a SAND128 format, so the table at the top will have ++ * already set the correct format. ++ */ ++ } ++ /* Note that the column pitch is passed across in lines, not ++ * bytes. ++ */ ++ mb->plane.pitch = fourcc_mod_broadcom_param(fb->modifier); ++ break; ++ } ++ ++ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane update %dx%d@%d +dst(%d,%d, %d,%d) +src(%d,%d, %d,%d) 0x%08x/%08x/%08x/%d, alpha %u zpos %u\n", ++ plane->base.id, plane->name, ++ mb->plane.width, ++ mb->plane.height, ++ mb->plane.vc_image_type, ++ state->crtc_x, ++ state->crtc_y, ++ state->crtc_w, ++ state->crtc_h, ++ mb->plane.src_x, ++ mb->plane.src_y, ++ mb->plane.src_w, ++ mb->plane.src_h, ++ mb->plane.planes[0], ++ mb->plane.planes[1], ++ mb->plane.planes[2], ++ fb->pitches[0], ++ state->alpha, ++ state->normalized_zpos); ++ ++ return 0; ++} ++ ++static int vc4_plane_atomic_check(struct drm_plane *plane, ++ struct drm_atomic_state *state) ++{ ++ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, ++ plane); ++ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane); ++ ++ if (!plane_enabled(new_plane_state)) ++ return 0; ++ ++ return vc4_plane_to_mb(plane, &vc4_plane->mb, new_plane_state); ++} ++ ++/* Called during init to allocate the plane's atomic state. */ ++static void vc4_plane_reset(struct drm_plane *plane) ++{ ++ struct vc4_plane_state *vc4_state; ++ ++ WARN_ON(plane->state); ++ ++ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL); ++ if (!vc4_state) ++ return; ++ ++ __drm_atomic_helper_plane_reset(plane, &vc4_state->base); ++} ++ ++static void vc4_plane_destroy(struct drm_plane *plane) ++{ ++ drm_plane_cleanup(plane); ++} ++ ++static bool vc4_fkms_format_mod_supported(struct drm_plane *plane, ++ uint32_t format, ++ uint64_t modifier) ++{ ++ /* Support T_TILING for RGB formats only. */ ++ switch (format) { ++ case DRM_FORMAT_XRGB8888: ++ case DRM_FORMAT_ARGB8888: ++ case DRM_FORMAT_RGB565: ++ switch (modifier) { ++ case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED: ++ case DRM_FORMAT_MOD_LINEAR: ++ return true; ++ default: ++ return false; ++ } ++ case DRM_FORMAT_NV12: ++ switch (fourcc_mod_broadcom_mod(modifier)) { ++ case DRM_FORMAT_MOD_LINEAR: ++ case DRM_FORMAT_MOD_BROADCOM_SAND128: ++ return true; ++ default: ++ return false; ++ } ++ case DRM_FORMAT_P030: ++ switch (fourcc_mod_broadcom_mod(modifier)) { ++ case DRM_FORMAT_MOD_BROADCOM_SAND128: ++ return true; ++ default: ++ return false; ++ } ++ case DRM_FORMAT_NV21: ++ case DRM_FORMAT_RGB888: ++ case DRM_FORMAT_BGR888: ++ case DRM_FORMAT_YUV422: ++ case DRM_FORMAT_YUV420: ++ case DRM_FORMAT_YVU420: ++ default: ++ return (modifier == DRM_FORMAT_MOD_LINEAR); ++ } ++} ++ ++static struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane) ++{ ++ struct vc4_plane_state *vc4_state; ++ ++ if (WARN_ON(!plane->state)) ++ return NULL; ++ ++ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL); ++ if (!vc4_state) ++ return NULL; ++ ++ __drm_atomic_helper_plane_duplicate_state(plane, &vc4_state->base); ++ ++ return &vc4_state->base; ++} ++ ++static const struct drm_plane_funcs vc4_plane_funcs = { ++ .update_plane = drm_atomic_helper_update_plane, ++ .disable_plane = drm_atomic_helper_disable_plane, ++ .destroy = vc4_plane_destroy, ++ .set_property = NULL, ++ .reset = vc4_plane_reset, ++ .atomic_duplicate_state = vc4_plane_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, ++ .format_mod_supported = vc4_fkms_format_mod_supported, ++}; ++ ++static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = { ++ .prepare_fb = drm_gem_plane_helper_prepare_fb, ++ .cleanup_fb = NULL, ++ .atomic_check = vc4_plane_atomic_check, ++ .atomic_update = vc4_plane_atomic_update, ++ .atomic_disable = vc4_plane_atomic_disable, ++}; ++ ++static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, ++ enum drm_plane_type type, ++ u8 display_num, ++ u8 plane_id) ++{ ++ struct drm_plane *plane = NULL; ++ struct vc4_fkms_plane *vc4_plane; ++ u32 formats[ARRAY_SIZE(vc_image_formats)]; ++ unsigned int default_zpos = 0; ++ u32 num_formats = 0; ++ int ret = 0; ++ static const uint64_t modifiers[] = { ++ DRM_FORMAT_MOD_LINEAR, ++ /* VC4_T_TILED should come after linear, because we ++ * would prefer to scan out linear (less bus traffic). ++ */ ++ DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED, ++ DRM_FORMAT_MOD_BROADCOM_SAND128, ++ DRM_FORMAT_MOD_INVALID, ++ }; ++ int i; ++ ++ vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane), ++ GFP_KERNEL); ++ if (!vc4_plane) { ++ ret = -ENOMEM; ++ goto fail; ++ } ++ ++ for (i = 0; i < ARRAY_SIZE(vc_image_formats); i++) ++ formats[num_formats++] = vc_image_formats[i].drm; ++ ++ plane = &vc4_plane->base; ++ ret = drm_universal_plane_init(dev, plane, 0, ++ &vc4_plane_funcs, ++ formats, num_formats, modifiers, ++ type, NULL); ++ ++ /* FIXME: Do we need to be checking return values from all these calls? ++ */ ++ drm_plane_helper_add(plane, &vc4_plane_helper_funcs); ++ ++ drm_plane_create_alpha_property(plane); ++ drm_plane_create_rotation_property(plane, DRM_MODE_ROTATE_0, ++ DRM_MODE_ROTATE_0 | ++ DRM_MODE_ROTATE_180 | ++ DRM_MODE_REFLECT_X | ++ DRM_MODE_REFLECT_Y); ++ drm_plane_create_color_properties(plane, ++ BIT(DRM_COLOR_YCBCR_BT601) | ++ BIT(DRM_COLOR_YCBCR_BT709) | ++ BIT(DRM_COLOR_YCBCR_BT2020), ++ BIT(DRM_COLOR_YCBCR_LIMITED_RANGE) | ++ BIT(DRM_COLOR_YCBCR_FULL_RANGE), ++ DRM_COLOR_YCBCR_BT709, ++ DRM_COLOR_YCBCR_LIMITED_RANGE); ++ ++ /* ++ * Default frame buffer setup is with FB on -127, and raspistill etc ++ * tend to drop overlays on layer 2. Cursor plane was on layer +127. ++ * ++ * For F-KMS the mailbox call allows for a s8. ++ * Remap zpos 0 to -127 for the background layer, but leave all the ++ * other layers as requested by KMS. ++ */ ++ switch (type) { ++ default: ++ case DRM_PLANE_TYPE_PRIMARY: ++ default_zpos = 0; ++ break; ++ case DRM_PLANE_TYPE_OVERLAY: ++ default_zpos = 1; ++ break; ++ case DRM_PLANE_TYPE_CURSOR: ++ default_zpos = 2; ++ break; ++ } ++ drm_plane_create_zpos_property(plane, default_zpos, 0, 127); ++ ++ /* Prepare the static elements of the mailbox structure */ ++ vc4_plane->mb.tag.tag = RPI_FIRMWARE_SET_PLANE; ++ vc4_plane->mb.tag.buf_size = sizeof(struct set_plane); ++ vc4_plane->mb.tag.req_resp_size = 0; ++ vc4_plane->mb.plane.display = display_num; ++ vc4_plane->mb.plane.plane_id = plane_id; ++ vc4_plane->mb.plane.layer = default_zpos ? default_zpos : -127; ++ ++ return plane; ++fail: ++ if (plane) ++ vc4_plane_destroy(plane); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc) ++{ ++ struct drm_device *dev = crtc->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_display_mode *mode = &crtc->state->adjusted_mode; ++ struct vc4_fkms_encoder *vc4_encoder = ++ to_vc4_fkms_encoder(vc4_crtc->encoder); ++ struct mailbox_set_mode mb = { ++ .tag1 = { RPI_FIRMWARE_SET_TIMING, ++ sizeof(struct set_timings), 0}, ++ }; ++ union hdmi_infoframe frame; ++ int ret; ++ ++ ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, vc4_crtc->connector, mode); ++ if (ret < 0) { ++ DRM_ERROR("couldn't fill AVI infoframe\n"); ++ return; ++ } ++ ++ DRM_DEBUG_KMS("Setting mode for display num %u mode name %s, clk %d, h(disp %d, start %d, end %d, total %d, skew %d) v(disp %d, start %d, end %d, total %d, scan %d), vrefresh %d, par %u, flags 0x%04x\n", ++ vc4_crtc->display_number, mode->name, mode->clock, ++ mode->hdisplay, mode->hsync_start, mode->hsync_end, ++ mode->htotal, mode->hskew, mode->vdisplay, ++ mode->vsync_start, mode->vsync_end, mode->vtotal, ++ mode->vscan, drm_mode_vrefresh(mode), ++ mode->picture_aspect_ratio, mode->flags); ++ mb.timings.display = vc4_crtc->display_number; ++ ++ mb.timings.clock = mode->clock; ++ mb.timings.hdisplay = mode->hdisplay; ++ mb.timings.hsync_start = mode->hsync_start; ++ mb.timings.hsync_end = mode->hsync_end; ++ mb.timings.htotal = mode->htotal; ++ mb.timings.hskew = mode->hskew; ++ mb.timings.vdisplay = mode->vdisplay; ++ mb.timings.vsync_start = mode->vsync_start; ++ mb.timings.vsync_end = mode->vsync_end; ++ mb.timings.vtotal = mode->vtotal; ++ mb.timings.vscan = mode->vscan; ++ mb.timings.vrefresh = drm_mode_vrefresh(mode); ++ mb.timings.flags = 0; ++ if (mode->flags & DRM_MODE_FLAG_PHSYNC) ++ mb.timings.flags |= TIMINGS_FLAGS_H_SYNC_POS; ++ if (mode->flags & DRM_MODE_FLAG_PVSYNC) ++ mb.timings.flags |= TIMINGS_FLAGS_V_SYNC_POS; ++ ++ switch (frame.avi.picture_aspect) { ++ default: ++ case HDMI_PICTURE_ASPECT_NONE: ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_NONE; ++ break; ++ case HDMI_PICTURE_ASPECT_4_3: ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_4_3; ++ break; ++ case HDMI_PICTURE_ASPECT_16_9: ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_16_9; ++ break; ++ case HDMI_PICTURE_ASPECT_64_27: ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_64_27; ++ break; ++ case HDMI_PICTURE_ASPECT_256_135: ++ mb.timings.flags |= TIMINGS_FLAGS_ASPECT_256_135; ++ break; ++ } ++ ++ if (mode->flags & DRM_MODE_FLAG_INTERLACE) ++ mb.timings.flags |= TIMINGS_FLAGS_INTERLACE; ++ if (mode->flags & DRM_MODE_FLAG_DBLCLK) ++ mb.timings.flags |= TIMINGS_FLAGS_DBL_CLK; ++ ++ mb.timings.video_id_code = frame.avi.video_code; ++ ++ if (!vc4_encoder->hdmi_monitor) { ++ mb.timings.flags |= TIMINGS_FLAGS_DVI; ++ } else { ++ struct vc4_fkms_connector_state *conn_state = ++ to_vc4_fkms_connector_state(vc4_crtc->connector->state); ++ ++ if (conn_state->broadcast_rgb == VC4_BROADCAST_RGB_AUTO) { ++ /* See CEA-861-E - 5.1 Default Encoding Parameters */ ++ if (drm_default_rgb_quant_range(mode) == ++ HDMI_QUANTIZATION_RANGE_LIMITED) ++ mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; ++ } else { ++ if (conn_state->broadcast_rgb == ++ VC4_BROADCAST_RGB_LIMITED) ++ mb.timings.flags |= TIMINGS_FLAGS_RGB_LIMITED; ++ ++ /* If not using the default range, then do not provide ++ * a VIC as the HDMI spec requires that we do not ++ * signal the opposite of the defined range in the AVI ++ * infoframe. ++ */ ++ if (!!(mb.timings.flags & TIMINGS_FLAGS_RGB_LIMITED) != ++ (drm_default_rgb_quant_range(mode) == ++ HDMI_QUANTIZATION_RANGE_LIMITED)) ++ mb.timings.video_id_code = 0; ++ } ++ } ++ ++ /* ++ * FIXME: To implement ++ * switch(mode->flag & DRM_MODE_FLAG_3D_MASK) { ++ * case DRM_MODE_FLAG_3D_NONE: ++ * case DRM_MODE_FLAG_3D_FRAME_PACKING: ++ * case DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: ++ * case DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: ++ * case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: ++ * case DRM_MODE_FLAG_3D_L_DEPTH: ++ * case DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ++ * case DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: ++ * case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: ++ * } ++ */ ++ ++ ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); ++} ++ ++static void vc4_crtc_disable(struct drm_crtc *crtc, ++ struct drm_atomic_state *state) ++{ ++ struct drm_device *dev = crtc->dev; ++ struct drm_plane *plane; ++ ++ DRM_DEBUG_KMS("[CRTC:%d] vblanks off.\n", ++ crtc->base.id); ++ drm_crtc_vblank_off(crtc); ++ ++ /* Always turn the planes off on CRTC disable. In DRM, planes ++ * are enabled/disabled through the update/disable hooks ++ * above, and the CRTC enable/disable independently controls ++ * whether anything scans out at all, but the firmware doesn't ++ * give us a CRTC-level control for that. ++ */ ++ ++ drm_atomic_crtc_for_each_plane(plane, crtc) ++ vc4_plane_atomic_disable(plane, state); ++ ++ /* ++ * Make sure we issue a vblank event after disabling the CRTC if ++ * someone was waiting it. ++ */ ++ if (crtc->state->event) { ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ drm_crtc_send_vblank_event(crtc, crtc->state->event); ++ crtc->state->event = NULL; ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++ } ++} ++ ++static void vc4_crtc_consume_event(struct drm_crtc *crtc) ++{ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ if (!crtc->state->event) ++ return; ++ ++ crtc->state->event->pipe = drm_crtc_index(crtc); ++ ++ WARN_ON(drm_crtc_vblank_get(crtc) != 0); ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ vc4_crtc->event = crtc->state->event; ++ crtc->state->event = NULL; ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++} ++ ++static void vc4_crtc_enable(struct drm_crtc *crtc, ++ struct drm_atomic_state *state) ++{ ++ struct drm_plane *plane; ++ ++ DRM_DEBUG_KMS("[CRTC:%d] vblanks on.\n", ++ crtc->base.id); ++ drm_crtc_vblank_on(crtc); ++ vc4_crtc_consume_event(crtc); ++ ++ /* Unblank the planes (if they're supposed to be displayed). */ ++ drm_atomic_crtc_for_each_plane(plane, crtc) ++ if (plane->state->fb) ++ vc4_plane_set_blank(plane, plane->state->visible); ++} ++ ++static enum drm_mode_status ++vc4_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode) ++{ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ struct drm_device *dev = crtc->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct vc4_fkms *fkms = vc4->fkms; ++ ++ /* Do not allow doublescan modes from user space */ ++ if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { ++ DRM_DEBUG_KMS("[CRTC:%d] Doublescan mode rejected.\n", ++ crtc->base.id); ++ return MODE_NO_DBLESCAN; ++ } ++ ++ /* Disable refresh rates > defined threshold (default 85Hz) as limited ++ * gain from them ++ */ ++ if (drm_mode_vrefresh(mode) > fkms_max_refresh_rate) ++ return MODE_BAD_VVALUE; ++ ++ /* Limit the pixel clock based on the HDMI clock limits from the ++ * firmware ++ */ ++ switch (vc4_crtc->display_number) { ++ case 2: /* HDMI0 */ ++ if (fkms->cfg.max_pixel_clock[0] && ++ mode->clock > fkms->cfg.max_pixel_clock[0]) ++ return MODE_CLOCK_HIGH; ++ break; ++ case 7: /* HDMI1 */ ++ if (fkms->cfg.max_pixel_clock[1] && ++ mode->clock > fkms->cfg.max_pixel_clock[1]) ++ return MODE_CLOCK_HIGH; ++ break; ++ } ++ ++ /* Pi4 can't generate odd horizontal timings on HDMI, so reject modes ++ * that would set them. ++ */ ++ if (fkms->bcm2711 && ++ (vc4_crtc->display_number == 2 || vc4_crtc->display_number == 7) && ++ !(mode->flags & DRM_MODE_FLAG_DBLCLK) && ++ ((mode->hdisplay | /* active */ ++ (mode->hsync_start - mode->hdisplay) | /* front porch */ ++ (mode->hsync_end - mode->hsync_start) | /* sync pulse */ ++ (mode->htotal - mode->hsync_end)) & 1)) /* back porch */ { ++ DRM_DEBUG_KMS("[CRTC:%d] Odd timing rejected %u %u %u %u.\n", ++ crtc->base.id, mode->hdisplay, mode->hsync_start, ++ mode->hsync_end, mode->htotal); ++ return MODE_H_ILLEGAL; ++ } ++ ++ return MODE_OK; ++} ++ ++static int vc4_crtc_atomic_check(struct drm_crtc *crtc, ++ struct drm_atomic_state *state) ++{ ++ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, ++ crtc); ++ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state); ++ struct drm_connector *conn; ++ struct drm_connector_state *conn_state; ++ int i; ++ ++ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n", crtc->base.id); ++ ++ for_each_new_connector_in_state(crtc_state->state, conn, conn_state, i) { ++ if (conn_state->crtc != crtc) ++ continue; ++ ++ vc4_state->margins.left = conn_state->tv.margins.left; ++ vc4_state->margins.right = conn_state->tv.margins.right; ++ vc4_state->margins.top = conn_state->tv.margins.top; ++ vc4_state->margins.bottom = conn_state->tv.margins.bottom; ++ break; ++ } ++ return 0; ++} ++ ++static void vc4_crtc_atomic_flush(struct drm_crtc *crtc, ++ struct drm_atomic_state *state) ++{ ++ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, ++ crtc); ++ ++ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_flush.\n", ++ crtc->base.id); ++ if (crtc->state->active && old_state->active && crtc->state->event) ++ vc4_crtc_consume_event(crtc); ++} ++ ++static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc) ++{ ++ struct drm_crtc *crtc = &vc4_crtc->base; ++ struct drm_device *dev = crtc->dev; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dev->event_lock, flags); ++ if (vc4_crtc->event) { ++ drm_crtc_send_vblank_event(crtc, vc4_crtc->event); ++ vc4_crtc->event = NULL; ++ drm_crtc_vblank_put(crtc); ++ } ++ spin_unlock_irqrestore(&dev->event_lock, flags); ++} ++ ++static irqreturn_t vc4_crtc_irq_handler(int irq, void *data) ++{ ++ struct vc4_crtc **crtc_list = data; ++ int i; ++ u32 stat = readl(crtc_list[0]->regs + SMICS); ++ irqreturn_t ret = IRQ_NONE; ++ u32 chan; ++ ++ if (stat & SMICS_INTERRUPTS) { ++ writel(0, crtc_list[0]->regs + SMICS); ++ ++ chan = readl(crtc_list[0]->regs + SMIDSW0); ++ ++ if ((chan & 0xFFFF0000) != SMI_NEW) { ++ /* Older firmware. Treat the one interrupt as vblank/ ++ * complete for all crtcs. ++ */ ++ for (i = 0; crtc_list[i]; i++) { ++ if (crtc_list[i]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[i]->base); ++ vc4_crtc_handle_page_flip(crtc_list[i]); ++ } ++ } else { ++ if (chan & 1) { ++ writel(SMI_NEW, crtc_list[0]->regs + SMIDSW0); ++ if (crtc_list[0]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[0]->base); ++ vc4_crtc_handle_page_flip(crtc_list[0]); ++ } ++ ++ if (crtc_list[1]) { ++ /* Check for the secondary display too */ ++ chan = readl(crtc_list[0]->regs + SMIDSW1); ++ ++ if (chan & 1) { ++ writel(SMI_NEW, crtc_list[0]->regs + SMIDSW1); ++ ++ if (crtc_list[1]->vblank_enabled) ++ drm_crtc_handle_vblank(&crtc_list[1]->base); ++ vc4_crtc_handle_page_flip(crtc_list[1]); ++ } ++ } ++ } ++ ++ ret = IRQ_HANDLED; ++ } ++ ++ return ret; ++} ++ ++static int vc4_fkms_page_flip(struct drm_crtc *crtc, ++ struct drm_framebuffer *fb, ++ struct drm_pending_vblank_event *event, ++ uint32_t flags, ++ struct drm_modeset_acquire_ctx *ctx) ++{ ++ if (flags & DRM_MODE_PAGE_FLIP_ASYNC) { ++ DRM_ERROR("Async flips aren't allowed\n"); ++ return -EINVAL; ++ } ++ ++ return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx); ++} ++ ++static struct drm_crtc_state * ++vc4_fkms_crtc_duplicate_state(struct drm_crtc *crtc) ++{ ++ struct vc4_crtc_state *vc4_state, *old_vc4_state; ++ ++ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL); ++ if (!vc4_state) ++ return NULL; ++ ++ old_vc4_state = to_vc4_crtc_state(crtc->state); ++ vc4_state->margins = old_vc4_state->margins; ++ ++ __drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base); ++ return &vc4_state->base; ++} ++ ++static void ++vc4_fkms_crtc_reset(struct drm_crtc *crtc) ++{ ++ if (crtc->state) ++ __drm_atomic_helper_crtc_destroy_state(crtc->state); ++ ++ crtc->state = kzalloc(sizeof(*crtc->state), GFP_KERNEL); ++ if (crtc->state) ++ crtc->state->crtc = crtc; ++} ++ ++static int vc4_fkms_enable_vblank(struct drm_crtc *crtc) ++{ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ ++ DRM_DEBUG_KMS("[CRTC:%d] enable_vblank.\n", ++ crtc->base.id); ++ vc4_crtc->vblank_enabled = true; ++ ++ return 0; ++} ++ ++static void vc4_fkms_disable_vblank(struct drm_crtc *crtc) ++{ ++ struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); ++ ++ DRM_DEBUG_KMS("[CRTC:%d] disable_vblank.\n", ++ crtc->base.id); ++ vc4_crtc->vblank_enabled = false; ++} ++ ++static const struct drm_crtc_funcs vc4_crtc_funcs = { ++ .set_config = drm_atomic_helper_set_config, ++ .destroy = drm_crtc_cleanup, ++ .page_flip = vc4_fkms_page_flip, ++ .set_property = NULL, ++ .cursor_set = NULL, /* handled by drm_mode_cursor_universal */ ++ .cursor_move = NULL, /* handled by drm_mode_cursor_universal */ ++ .reset = vc4_fkms_crtc_reset, ++ .atomic_duplicate_state = vc4_fkms_crtc_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, ++ .enable_vblank = vc4_fkms_enable_vblank, ++ .disable_vblank = vc4_fkms_disable_vblank, ++}; ++ ++static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = { ++ .mode_set_nofb = vc4_crtc_mode_set_nofb, ++ .mode_valid = vc4_crtc_mode_valid, ++ .atomic_check = vc4_crtc_atomic_check, ++ .atomic_flush = vc4_crtc_atomic_flush, ++ .atomic_enable = vc4_crtc_enable, ++ .atomic_disable = vc4_crtc_disable, ++}; ++ ++static const struct of_device_id vc4_firmware_kms_dt_match[] = { ++ { .compatible = "raspberrypi,rpi-firmware-kms" }, ++ { .compatible = "raspberrypi,rpi-firmware-kms-2711", ++ .data = (void *)1 }, ++ {} ++}; ++ ++static enum drm_connector_status ++vc4_fkms_connector_detect(struct drm_connector *connector, bool force) ++{ ++ DRM_DEBUG_KMS("connector detect.\n"); ++ return connector_status_connected; ++} ++ ++/* Queries the firmware to populate a drm_mode structure for this display */ ++static int vc4_fkms_get_fw_mode(struct vc4_fkms_connector *fkms_connector, ++ struct drm_display_mode *mode) ++{ ++ struct vc4_dev *vc4 = fkms_connector->vc4_dev; ++ struct set_timings timings = { 0 }; ++ int ret; ++ ++ timings.display = fkms_connector->display_number; ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_GET_DISPLAY_TIMING, &timings, ++ sizeof(timings)); ++ if (ret || !timings.clock) ++ /* No mode returned - abort */ ++ return -1; ++ ++ /* Equivalent to DRM_MODE macro. */ ++ memset(mode, 0, sizeof(*mode)); ++ strncpy(mode->name, "FIXED_MODE", sizeof(mode->name)); ++ mode->status = 0; ++ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; ++ mode->clock = timings.clock; ++ mode->hdisplay = timings.hdisplay; ++ mode->hsync_start = timings.hsync_start; ++ mode->hsync_end = timings.hsync_end; ++ mode->htotal = timings.htotal; ++ mode->hskew = 0; ++ mode->vdisplay = timings.vdisplay; ++ mode->vsync_start = timings.vsync_start; ++ mode->vsync_end = timings.vsync_end; ++ mode->vtotal = timings.vtotal; ++ mode->vscan = timings.vscan; ++ ++ if (timings.flags & TIMINGS_FLAGS_H_SYNC_POS) ++ mode->flags |= DRM_MODE_FLAG_PHSYNC; ++ else ++ mode->flags |= DRM_MODE_FLAG_NHSYNC; ++ ++ if (timings.flags & TIMINGS_FLAGS_V_SYNC_POS) ++ mode->flags |= DRM_MODE_FLAG_PVSYNC; ++ else ++ mode->flags |= DRM_MODE_FLAG_NVSYNC; ++ ++ if (timings.flags & TIMINGS_FLAGS_INTERLACE) ++ mode->flags |= DRM_MODE_FLAG_INTERLACE; ++ ++ return 0; ++} ++ ++static int vc4_fkms_get_edid_block(void *data, u8 *buf, unsigned int block, ++ size_t len) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ (struct vc4_fkms_connector *)data; ++ struct vc4_dev *vc4 = fkms_connector->vc4_dev; ++ struct mailbox_get_edid mb = { ++ .tag1 = { RPI_FIRMWARE_GET_EDID_BLOCK_DISPLAY, ++ 128 + 8, 0 }, ++ .block = block, ++ .display_number = fkms_connector->display_number, ++ }; ++ int ret = 0; ++ ++ ret = rpi_firmware_property_list(vc4->firmware, &mb, sizeof(mb)); ++ ++ if (!ret) ++ memcpy(buf, mb.edid, len); ++ ++ return ret; ++} ++ ++static int vc4_fkms_connector_get_modes(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct drm_encoder *encoder = fkms_connector->encoder; ++ struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); ++ struct drm_display_mode fw_mode; ++ struct drm_display_mode *mode; ++ struct edid *edid; ++ int num_modes; ++ ++ if (!vc4_fkms_get_fw_mode(fkms_connector, &fw_mode)) { ++ drm_mode_debug_printmodeline(&fw_mode); ++ mode = drm_mode_duplicate(connector->dev, ++ &fw_mode); ++ drm_mode_probed_add(connector, mode); ++ num_modes = 1; /* 1 mode */ ++ } else { ++ edid = drm_do_get_edid(connector, vc4_fkms_get_edid_block, ++ fkms_connector); ++ ++ /* FIXME: Can we do CEC? ++ * cec_s_phys_addr_from_edid(vc4->hdmi->cec_adap, edid); ++ * if (!edid) ++ * return -ENODEV; ++ */ ++ ++ vc4_encoder->hdmi_monitor = drm_detect_hdmi_monitor(edid); ++ ++ drm_connector_update_edid_property(connector, edid); ++ num_modes = drm_add_edid_modes(connector, edid); ++ kfree(edid); ++ } ++ ++ return num_modes; ++} ++ ++/* This is the DSI panel resolution. Use this as a default should the firmware ++ * not respond to our request for the timings. ++ */ ++static const struct drm_display_mode lcd_mode = { ++ DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, ++ 25979400 / 1000, ++ 800, 800 + 1, 800 + 1 + 2, 800 + 1 + 2 + 46, 0, ++ 480, 480 + 7, 480 + 7 + 2, 480 + 7 + 2 + 21, 0, ++ 0) ++}; ++ ++static int vc4_fkms_lcd_connector_get_modes(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct drm_display_mode *mode; ++ struct drm_display_mode fw_mode; ++ ++ if (!vc4_fkms_get_fw_mode(fkms_connector, &fw_mode) && fw_mode.clock) ++ mode = drm_mode_duplicate(connector->dev, ++ &fw_mode); ++ else ++ mode = drm_mode_duplicate(connector->dev, ++ &lcd_mode); ++ ++ if (!mode) { ++ DRM_ERROR("Failed to create a new display mode\n"); ++ return -ENOMEM; ++ } ++ ++ drm_mode_probed_add(connector, mode); ++ ++ /* We have one mode */ ++ return 1; ++} ++ ++static struct drm_encoder * ++vc4_fkms_connector_best_encoder(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ DRM_DEBUG_KMS("best_connector.\n"); ++ return fkms_connector->encoder; ++} ++ ++static void vc4_fkms_connector_destroy(struct drm_connector *connector) ++{ ++ DRM_DEBUG_KMS("[CONNECTOR:%d] destroy.\n", ++ connector->base.id); ++ drm_connector_unregister(connector); ++ drm_connector_cleanup(connector); ++} ++ ++/** ++ * vc4_connector_duplicate_state - duplicate connector state ++ * @connector: digital connector ++ * ++ * Allocates and returns a copy of the connector state (both common and ++ * digital connector specific) for the specified connector. ++ * ++ * Returns: The newly allocated connector state, or NULL on failure. ++ */ ++struct drm_connector_state * ++vc4_connector_duplicate_state(struct drm_connector *connector) ++{ ++ struct vc4_fkms_connector_state *state; ++ ++ state = kmemdup(connector->state, sizeof(*state), GFP_KERNEL); ++ if (!state) ++ return NULL; ++ ++ __drm_atomic_helper_connector_duplicate_state(connector, &state->base); ++ return &state->base; ++} ++ ++/** ++ * vc4_connector_atomic_get_property - hook for connector->atomic_get_property. ++ * @connector: Connector to get the property for. ++ * @state: Connector state to retrieve the property from. ++ * @property: Property to retrieve. ++ * @val: Return value for the property. ++ * ++ * Returns the atomic property value for a digital connector. ++ */ ++int vc4_connector_atomic_get_property(struct drm_connector *connector, ++ const struct drm_connector_state *state, ++ struct drm_property *property, ++ uint64_t *val) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct vc4_fkms_connector_state *vc4_conn_state = ++ to_vc4_fkms_connector_state(state); ++ ++ if (property == fkms_connector->broadcast_rgb_property) { ++ *val = vc4_conn_state->broadcast_rgb; ++ } else { ++ DRM_DEBUG_ATOMIC("Unknown property [PROP:%d:%s]\n", ++ property->base.id, property->name); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * vc4_connector_atomic_set_property - hook for connector->atomic_set_property. ++ * @connector: Connector to set the property for. ++ * @state: Connector state to set the property on. ++ * @property: Property to set. ++ * @val: New value for the property. ++ * ++ * Sets the atomic property value for a digital connector. ++ */ ++int vc4_connector_atomic_set_property(struct drm_connector *connector, ++ struct drm_connector_state *state, ++ struct drm_property *property, ++ uint64_t val) ++{ ++ struct vc4_fkms_connector *fkms_connector = ++ to_vc4_fkms_connector(connector); ++ struct vc4_fkms_connector_state *vc4_conn_state = ++ to_vc4_fkms_connector_state(state); ++ ++ if (property == fkms_connector->broadcast_rgb_property) { ++ vc4_conn_state->broadcast_rgb = val; ++ return 0; ++ } ++ ++ DRM_DEBUG_ATOMIC("Unknown property [PROP:%d:%s]\n", ++ property->base.id, property->name); ++ return -EINVAL; ++} ++ ++int vc4_connector_atomic_check(struct drm_connector *connector, ++ struct drm_atomic_state *state) ++{ ++ struct drm_connector_state *old_state = ++ drm_atomic_get_old_connector_state(state, connector); ++ struct vc4_fkms_connector_state *vc4_old_state = ++ to_vc4_fkms_connector_state(old_state); ++ struct drm_connector_state *new_state = ++ drm_atomic_get_new_connector_state(state, connector); ++ struct vc4_fkms_connector_state *vc4_new_state = ++ to_vc4_fkms_connector_state(new_state); ++ struct drm_crtc *crtc = new_state->crtc; ++ ++ if (!crtc) ++ return 0; ++ ++ if (vc4_old_state->broadcast_rgb != vc4_new_state->broadcast_rgb) { ++ struct drm_crtc_state *crtc_state; ++ ++ crtc_state = drm_atomic_get_crtc_state(state, crtc); ++ if (IS_ERR(crtc_state)) ++ return PTR_ERR(crtc_state); ++ ++ crtc_state->mode_changed = true; ++ } ++ return 0; ++} ++ ++static void vc4_hdmi_connector_reset(struct drm_connector *connector) ++{ ++ drm_atomic_helper_connector_reset(connector); ++ drm_atomic_helper_connector_tv_reset(connector); ++} ++ ++static const struct drm_connector_funcs vc4_fkms_connector_funcs = { ++ .detect = vc4_fkms_connector_detect, ++ .fill_modes = drm_helper_probe_single_connector_modes, ++ .destroy = vc4_fkms_connector_destroy, ++ .reset = vc4_hdmi_connector_reset, ++ .atomic_duplicate_state = vc4_connector_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++ .atomic_get_property = vc4_connector_atomic_get_property, ++ .atomic_set_property = vc4_connector_atomic_set_property, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_fkms_connector_helper_funcs = { ++ .get_modes = vc4_fkms_connector_get_modes, ++ .best_encoder = vc4_fkms_connector_best_encoder, ++ .atomic_check = vc4_connector_atomic_check, ++}; ++ ++static const struct drm_connector_helper_funcs vc4_fkms_lcd_conn_helper_funcs = { ++ .get_modes = vc4_fkms_lcd_connector_get_modes, ++ .best_encoder = vc4_fkms_connector_best_encoder, ++}; ++ ++static const struct drm_prop_enum_list broadcast_rgb_names[] = { ++ { VC4_BROADCAST_RGB_AUTO, "Automatic" }, ++ { VC4_BROADCAST_RGB_FULL, "Full" }, ++ { VC4_BROADCAST_RGB_LIMITED, "Limited 16:235" }, ++}; ++ ++static void ++vc4_attach_broadcast_rgb_property(struct vc4_fkms_connector *fkms_connector) ++{ ++ struct drm_device *dev = fkms_connector->base.dev; ++ struct drm_property *prop; ++ ++ prop = fkms_connector->broadcast_rgb_property; ++ if (!prop) { ++ prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, ++ "Broadcast RGB", ++ broadcast_rgb_names, ++ ARRAY_SIZE(broadcast_rgb_names)); ++ if (!prop) ++ return; ++ ++ fkms_connector->broadcast_rgb_property = prop; ++ } ++ ++ drm_object_attach_property(&fkms_connector->base.base, prop, 0); ++} ++ ++static struct drm_connector * ++vc4_fkms_connector_init(struct drm_device *dev, struct drm_encoder *encoder, ++ u32 display_num) ++{ ++ struct drm_connector *connector = NULL; ++ struct vc4_fkms_connector *fkms_connector; ++ struct vc4_fkms_connector_state *conn_state = NULL; ++ struct vc4_dev *vc4_dev = to_vc4_dev(dev); ++ int ret = 0; ++ ++ DRM_DEBUG_KMS("connector_init, display_num %u\n", display_num); ++ ++ fkms_connector = devm_kzalloc(dev->dev, sizeof(*fkms_connector), ++ GFP_KERNEL); ++ if (!fkms_connector) ++ return ERR_PTR(-ENOMEM); ++ ++ /* ++ * Allocate enough memory to hold vc4_fkms_connector_state, ++ */ ++ conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL); ++ if (!conn_state) { ++ kfree(fkms_connector); ++ return ERR_PTR(-ENOMEM); ++ } ++ ++ connector = &fkms_connector->base; ++ ++ fkms_connector->encoder = encoder; ++ fkms_connector->display_number = display_num; ++ fkms_connector->display_type = vc4_get_display_type(display_num); ++ fkms_connector->vc4_dev = vc4_dev; ++ ++ __drm_atomic_helper_connector_reset(connector, ++ &conn_state->base); ++ ++ if (fkms_connector->display_type == DRM_MODE_ENCODER_DSI) { ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_DSI); ++ drm_connector_helper_add(connector, ++ &vc4_fkms_lcd_conn_helper_funcs); ++ connector->interlace_allowed = 0; ++ } else if (fkms_connector->display_type == DRM_MODE_ENCODER_TVDAC) { ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_Composite); ++ drm_connector_helper_add(connector, ++ &vc4_fkms_lcd_conn_helper_funcs); ++ connector->interlace_allowed = 1; ++ } else { ++ drm_connector_init(dev, connector, &vc4_fkms_connector_funcs, ++ DRM_MODE_CONNECTOR_HDMIA); ++ drm_connector_helper_add(connector, ++ &vc4_fkms_connector_helper_funcs); ++ connector->interlace_allowed = 1; ++ } ++ ++ ret = drm_mode_create_tv_margin_properties(dev); ++ if (ret) ++ goto fail; ++ ++ drm_connector_attach_tv_margin_properties(connector); ++ ++ connector->polled = (DRM_CONNECTOR_POLL_CONNECT | ++ DRM_CONNECTOR_POLL_DISCONNECT); ++ ++ connector->doublescan_allowed = 0; ++ ++ vc4_attach_broadcast_rgb_property(fkms_connector); ++ ++ drm_connector_attach_encoder(connector, encoder); ++ ++ return connector; ++ ++ fail: ++ if (connector) ++ vc4_fkms_connector_destroy(connector); ++ ++ return ERR_PTR(ret); ++} ++ ++static void vc4_fkms_encoder_destroy(struct drm_encoder *encoder) ++{ ++ DRM_DEBUG_KMS("Encoder_destroy\n"); ++ drm_encoder_cleanup(encoder); ++} ++ ++static const struct drm_encoder_funcs vc4_fkms_encoder_funcs = { ++ .destroy = vc4_fkms_encoder_destroy, ++}; ++ ++static void vc4_fkms_display_power(struct drm_encoder *encoder, bool power) ++{ ++ struct vc4_fkms_encoder *vc4_encoder = to_vc4_fkms_encoder(encoder); ++ struct vc4_dev *vc4 = to_vc4_dev(encoder->dev); ++ ++ struct mailbox_display_pwr pwr = { ++ .tag1 = {RPI_FIRMWARE_SET_DISPLAY_POWER, 8, 0, }, ++ .display = vc4_encoder->display_num, ++ .state = power ? 1 : 0, ++ }; ++ ++ rpi_firmware_property_list(vc4->firmware, &pwr, sizeof(pwr)); ++} ++ ++static void vc4_fkms_encoder_enable(struct drm_encoder *encoder) ++{ ++ vc4_fkms_display_power(encoder, true); ++ DRM_DEBUG_KMS("Encoder_enable\n"); ++} ++ ++static void vc4_fkms_encoder_disable(struct drm_encoder *encoder) ++{ ++ vc4_fkms_display_power(encoder, false); ++ DRM_DEBUG_KMS("Encoder_disable\n"); ++} ++ ++static const struct drm_encoder_helper_funcs vc4_fkms_encoder_helper_funcs = { ++ .enable = vc4_fkms_encoder_enable, ++ .disable = vc4_fkms_encoder_disable, ++}; ++ ++static int vc4_fkms_create_screen(struct device *dev, struct drm_device *drm, ++ int display_idx, int display_ref, ++ struct vc4_crtc **ret_crtc) ++{ ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct vc4_crtc *vc4_crtc; ++ struct vc4_fkms_encoder *vc4_encoder; ++ struct drm_crtc *crtc; ++ struct drm_plane *destroy_plane, *temp; ++ struct mailbox_blank_display blank = { ++ .tag1 = {RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM, 4, 0, }, ++ .display = display_idx, ++ .tag2 = { RPI_FIRMWARE_FRAMEBUFFER_BLANK, 4, 0, }, ++ .blank = 1, ++ }; ++ struct drm_plane *planes[PLANES_PER_CRTC]; ++ int ret, i; ++ ++ vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL); ++ if (!vc4_crtc) ++ return -ENOMEM; ++ crtc = &vc4_crtc->base; ++ ++ vc4_crtc->display_number = display_ref; ++ vc4_crtc->display_type = vc4_get_display_type(display_ref); ++ ++ /* Blank the firmware provided framebuffer */ ++ rpi_firmware_property_list(vc4->firmware, &blank, sizeof(blank)); ++ ++ for (i = 0; i < PLANES_PER_CRTC; i++) { ++ planes[i] = vc4_fkms_plane_init(drm, ++ (i == 0) ? ++ DRM_PLANE_TYPE_PRIMARY : ++ (i == PLANES_PER_CRTC - 1) ? ++ DRM_PLANE_TYPE_CURSOR : ++ DRM_PLANE_TYPE_OVERLAY, ++ display_ref, ++ i + (display_idx * PLANES_PER_CRTC) ++ ); ++ if (IS_ERR(planes[i])) { ++ dev_err(dev, "failed to construct plane %u\n", i); ++ ret = PTR_ERR(planes[i]); ++ goto err; ++ } ++ } ++ ++ drm_crtc_init_with_planes(drm, crtc, planes[0], ++ planes[PLANES_PER_CRTC - 1], &vc4_crtc_funcs, ++ NULL); ++ drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs); ++ ++ /* Update the possible_crtcs mask for the overlay plane(s) */ ++ for (i = 1; i < (PLANES_PER_CRTC - 1); i++) ++ planes[i]->possible_crtcs = drm_crtc_mask(crtc); ++ ++ vc4_encoder = devm_kzalloc(dev, sizeof(*vc4_encoder), GFP_KERNEL); ++ if (!vc4_encoder) ++ return -ENOMEM; ++ vc4_crtc->encoder = &vc4_encoder->base; ++ ++ vc4_encoder->display_num = display_ref; ++ vc4_encoder->base.possible_crtcs |= drm_crtc_mask(crtc); ++ ++ drm_encoder_init(drm, &vc4_encoder->base, &vc4_fkms_encoder_funcs, ++ vc4_crtc->display_type, NULL); ++ drm_encoder_helper_add(&vc4_encoder->base, ++ &vc4_fkms_encoder_helper_funcs); ++ ++ vc4_crtc->connector = vc4_fkms_connector_init(drm, &vc4_encoder->base, ++ display_ref); ++ if (IS_ERR(vc4_crtc->connector)) { ++ ret = PTR_ERR(vc4_crtc->connector); ++ goto err_destroy_encoder; ++ } ++ ++ *ret_crtc = vc4_crtc; ++ ++ return 0; ++ ++err_destroy_encoder: ++ vc4_fkms_encoder_destroy(vc4_crtc->encoder); ++ list_for_each_entry_safe(destroy_plane, temp, ++ &drm->mode_config.plane_list, head) { ++ if (destroy_plane->possible_crtcs == 1 << drm_crtc_index(crtc)) ++ destroy_plane->funcs->destroy(destroy_plane); ++ } ++err: ++ return ret; ++} ++ ++static int vc4_fkms_bind(struct device *dev, struct device *master, void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct drm_device *drm = dev_get_drvdata(master); ++ struct vc4_dev *vc4 = to_vc4_dev(drm); ++ struct device_node *firmware_node; ++ const struct of_device_id *match; ++ struct vc4_crtc **crtc_list; ++ u32 num_displays, display_num; ++ struct vc4_fkms *fkms; ++ int ret; ++ u32 display_id; ++ ++ vc4->firmware_kms = true; ++ ++ fkms = devm_kzalloc(dev, sizeof(*fkms), GFP_KERNEL); ++ if (!fkms) ++ return -ENOMEM; ++ ++ match = of_match_device(vc4_firmware_kms_dt_match, dev); ++ if (!match) ++ return -ENODEV; ++ if (match->data) ++ fkms->bcm2711 = true; ++ ++ firmware_node = of_parse_phandle(dev->of_node, "brcm,firmware", 0); ++ vc4->firmware = devm_rpi_firmware_get(&pdev->dev, firmware_node); ++ if (!vc4->firmware) { ++ DRM_DEBUG("Failed to get Raspberry Pi firmware reference.\n"); ++ return -EPROBE_DEFER; ++ } ++ of_node_put(firmware_node); ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS, ++ &num_displays, sizeof(u32)); ++ ++ /* If we fail to get the number of displays, then ++ * assume old firmware that doesn't have the mailbox call, so just ++ * set one display ++ */ ++ if (ret) { ++ num_displays = 1; ++ DRM_WARN("Unable to determine number of displays - assuming 1\n"); ++ ret = 0; ++ } ++ ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_GET_DISPLAY_CFG, ++ &fkms->cfg, sizeof(fkms->cfg)); ++ ++ if (ret) ++ return -EINVAL; ++ /* The firmware works in Hz. This will be compared against kHz, so div ++ * 1000 now rather than multiple times later. ++ */ ++ fkms->cfg.max_pixel_clock[0] /= 1000; ++ fkms->cfg.max_pixel_clock[1] /= 1000; ++ ++ /* Allocate a list, with space for a NULL on the end */ ++ crtc_list = devm_kzalloc(dev, sizeof(crtc_list) * (num_displays + 1), ++ GFP_KERNEL); ++ if (!crtc_list) ++ return -ENOMEM; ++ ++ for (display_num = 0; display_num < num_displays; display_num++) { ++ display_id = display_num; ++ ret = rpi_firmware_property(vc4->firmware, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID, ++ &display_id, sizeof(display_id)); ++ /* FIXME: Determine the correct error handling here. ++ * Should we fail to create the one "screen" but keep the ++ * others, or fail the whole thing? ++ */ ++ if (ret) ++ DRM_ERROR("Failed to get display id %u\n", display_num); ++ ++ ret = vc4_fkms_create_screen(dev, drm, display_num, display_id, ++ &crtc_list[display_num]); ++ if (ret) ++ DRM_ERROR("Oh dear, failed to create display %u\n", ++ display_num); ++ } ++ ++ if (num_displays > 0) { ++ /* Map the SMI interrupt reg */ ++ crtc_list[0]->regs = vc4_ioremap_regs(pdev, 0); ++ if (IS_ERR(crtc_list[0]->regs)) ++ DRM_ERROR("Oh dear, failed to map registers\n"); ++ ++ writel(0, crtc_list[0]->regs + SMICS); ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), ++ vc4_crtc_irq_handler, 0, ++ "vc4 firmware kms", crtc_list); ++ if (ret) ++ DRM_ERROR("Oh dear, failed to register IRQ\n"); ++ } else { ++ DRM_WARN("No displays found. Consider forcing hotplug if HDMI is attached\n"); ++ } ++ ++ vc4->fkms = fkms; ++ ++ platform_set_drvdata(pdev, crtc_list); ++ ++ return 0; ++} ++ ++static void vc4_fkms_unbind(struct device *dev, struct device *master, ++ void *data) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct vc4_crtc **crtc_list = dev_get_drvdata(dev); ++ int i; ++ ++ for (i = 0; crtc_list[i]; i++) { ++ vc4_fkms_connector_destroy(crtc_list[i]->connector); ++ vc4_fkms_encoder_destroy(crtc_list[i]->encoder); ++ drm_crtc_cleanup(&crtc_list[i]->base); ++ } ++ ++ platform_set_drvdata(pdev, NULL); ++} ++ ++static const struct component_ops vc4_fkms_ops = { ++ .bind = vc4_fkms_bind, ++ .unbind = vc4_fkms_unbind, ++}; ++ ++static int vc4_fkms_probe(struct platform_device *pdev) ++{ ++ return component_add(&pdev->dev, &vc4_fkms_ops); ++} ++ ++static int vc4_fkms_remove(struct platform_device *pdev) ++{ ++ component_del(&pdev->dev, &vc4_fkms_ops); ++ return 0; ++} ++ ++struct platform_driver vc4_firmware_kms_driver = { ++ .probe = vc4_fkms_probe, ++ .remove = vc4_fkms_remove, ++ .driver = { ++ .name = "vc4_firmware_kms", ++ .of_match_table = vc4_firmware_kms_dt_match, ++ }, ++}; +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -162,6 +162,9 @@ vc4_ctm_commit(struct vc4_dev *vc4, stru + struct vc4_ctm_state *ctm_state = to_vc4_ctm_state(vc4->ctm_manager.state); + struct drm_color_ctm *ctm = ctm_state->ctm; + ++ if (vc4->firmware_kms) ++ return; ++ + if (ctm_state->fifo) { + HVS_WRITE(SCALER_OLEDCOEF2, + VC4_SET_FIELD(vc4_ctm_s31_32_to_s0_9(ctm->matrix[0]), +@@ -367,7 +370,7 @@ static void vc4_atomic_commit_tail(struc + for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { + struct vc4_crtc_state *vc4_crtc_state; + +- if (!new_crtc_state->commit) ++ if (!new_crtc_state->commit || vc4->firmware_kms) + continue; + + vc4_crtc_state = to_vc4_crtc_state(new_crtc_state); +@@ -393,7 +396,7 @@ static void vc4_atomic_commit_tail(struc + old_hvs_state->fifo_state[channel].pending_commit = NULL; + } + +- if (vc4->is_vc5) { ++ if (vc4->is_vc5 && !vc4->firmware_kms) { + unsigned long state_rate = max(old_hvs_state->core_clock_rate, + new_hvs_state->core_clock_rate); + unsigned long core_rate = max_t(unsigned long, +@@ -412,10 +415,12 @@ static void vc4_atomic_commit_tail(struc + + vc4_ctm_commit(vc4, state); + +- if (vc4->is_vc5) +- vc5_hvs_pv_muxing_commit(vc4, state); +- else +- vc4_hvs_pv_muxing_commit(vc4, state); ++ if (!vc4->firmware_kms) { ++ if (vc4->is_vc5) ++ vc5_hvs_pv_muxing_commit(vc4, state); ++ else ++ vc4_hvs_pv_muxing_commit(vc4, state); ++ } + + drm_atomic_helper_commit_planes(dev, state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); +@@ -430,7 +435,7 @@ static void vc4_atomic_commit_tail(struc + + drm_atomic_helper_cleanup_planes(dev, state); + +- if (vc4->is_vc5) { ++ if (vc4->is_vc5 && !vc4->firmware_kms) { + drm_dbg(dev, "Running the core clock at %lu Hz\n", + new_hvs_state->core_clock_rate); + +@@ -447,11 +452,21 @@ static void vc4_atomic_commit_tail(struc + + static int vc4_atomic_commit_setup(struct drm_atomic_state *state) + { ++ struct drm_device *dev = state->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); + struct drm_crtc_state *crtc_state; + struct vc4_hvs_state *hvs_state; + struct drm_crtc *crtc; + unsigned int i; + ++ /* We know for sure we don't want an async update here. Set ++ * state->legacy_cursor_update to false to prevent ++ * drm_atomic_helper_setup_commit() from auto-completing ++ * commit->flip_done. ++ */ ++ if (!vc4->firmware_kms) ++ state->legacy_cursor_update = false; ++ + hvs_state = vc4_hvs_get_new_global_state(state); + if (WARN_ON(IS_ERR(hvs_state))) + return PTR_ERR(hvs_state); +@@ -806,6 +821,7 @@ static int vc4_hvs_channels_obj_init(str + static int vc4_pv_muxing_atomic_check(struct drm_device *dev, + struct drm_atomic_state *state) + { ++ struct vc4_dev *vc4 = to_vc4_dev(state->dev); + struct vc4_hvs_state *hvs_new_state; + struct drm_crtc_state *old_crtc_state, *new_crtc_state; + struct drm_crtc *crtc; +@@ -829,6 +845,9 @@ static int vc4_pv_muxing_atomic_check(st + unsigned int matching_channels; + unsigned int channel; + ++ if (vc4->firmware_kms) ++ continue; ++ + drm_dbg(dev, "%s: Trying to find a channel.\n", crtc->name); + + /* Nothing to do here, let's skip it */ +@@ -1047,6 +1066,8 @@ int vc4_kms_load(struct drm_device *dev) + dev->mode_config.helper_private = &vc4_mode_config_helpers; + dev->mode_config.preferred_depth = 24; + dev->mode_config.async_page_flip = true; ++ if (vc4->firmware_kms) ++ dev->mode_config.normalize_zpos = true; + + ret = vc4_ctm_obj_init(vc4); + if (ret) +--- /dev/null ++++ b/drivers/gpu/drm/vc4/vc_image_types.h +@@ -0,0 +1,175 @@ ++ ++/* ++ * Copyright (c) 2012, Broadcom Europe Ltd ++ * ++ * Values taken from vc_image_types.h released by Broadcom at ++ * https://github.com/raspberrypi/userland/blob/master/interface/vctypes/vc_image_types.h ++ * and vc_image_structs.h at ++ * https://github.com/raspberrypi/userland/blob/master/interface/vctypes/vc_image_structs.h ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++enum { ++ VC_IMAGE_MIN = 0, //bounds for error checking ++ ++ VC_IMAGE_RGB565 = 1, ++ VC_IMAGE_1BPP, ++ VC_IMAGE_YUV420, ++ VC_IMAGE_48BPP, ++ VC_IMAGE_RGB888, ++ VC_IMAGE_8BPP, ++ /* 4bpp palettised image */ ++ VC_IMAGE_4BPP, ++ /* A separated format of 16 colour/light shorts followed by 16 z ++ * values ++ */ ++ VC_IMAGE_3D32, ++ /* 16 colours followed by 16 z values */ ++ VC_IMAGE_3D32B, ++ /* A separated format of 16 material/colour/light shorts followed by ++ * 16 z values ++ */ ++ VC_IMAGE_3D32MAT, ++ /* 32 bit format containing 18 bits of 6.6.6 RGB, 9 bits per short */ ++ VC_IMAGE_RGB2X9, ++ /* 32-bit format holding 18 bits of 6.6.6 RGB */ ++ VC_IMAGE_RGB666, ++ /* 4bpp palettised image with embedded palette */ ++ VC_IMAGE_PAL4_OBSOLETE, ++ /* 8bpp palettised image with embedded palette */ ++ VC_IMAGE_PAL8_OBSOLETE, ++ /* RGB888 with an alpha byte after each pixel */ ++ VC_IMAGE_RGBA32, ++ /* a line of Y (32-byte padded), a line of U (16-byte padded), and a ++ * line of V (16-byte padded) ++ */ ++ VC_IMAGE_YUV422, ++ /* RGB565 with a transparent patch */ ++ VC_IMAGE_RGBA565, ++ /* Compressed (4444) version of RGBA32 */ ++ VC_IMAGE_RGBA16, ++ /* VCIII codec format */ ++ VC_IMAGE_YUV_UV, ++ /* VCIII T-format RGBA8888 */ ++ VC_IMAGE_TF_RGBA32, ++ /* VCIII T-format RGBx8888 */ ++ VC_IMAGE_TF_RGBX32, ++ /* VCIII T-format float */ ++ VC_IMAGE_TF_FLOAT, ++ /* VCIII T-format RGBA4444 */ ++ VC_IMAGE_TF_RGBA16, ++ /* VCIII T-format RGB5551 */ ++ VC_IMAGE_TF_RGBA5551, ++ /* VCIII T-format RGB565 */ ++ VC_IMAGE_TF_RGB565, ++ /* VCIII T-format 8-bit luma and 8-bit alpha */ ++ VC_IMAGE_TF_YA88, ++ /* VCIII T-format 8 bit generic sample */ ++ VC_IMAGE_TF_BYTE, ++ /* VCIII T-format 8-bit palette */ ++ VC_IMAGE_TF_PAL8, ++ /* VCIII T-format 4-bit palette */ ++ VC_IMAGE_TF_PAL4, ++ /* VCIII T-format Ericsson Texture Compressed */ ++ VC_IMAGE_TF_ETC1, ++ /* RGB888 with R & B swapped */ ++ VC_IMAGE_BGR888, ++ /* RGB888 with R & B swapped, but with no pitch, i.e. no padding after ++ * each row of pixels ++ */ ++ VC_IMAGE_BGR888_NP, ++ /* Bayer image, extra defines which variant is being used */ ++ VC_IMAGE_BAYER, ++ /* General wrapper for codec images e.g. JPEG from camera */ ++ VC_IMAGE_CODEC, ++ /* VCIII codec format */ ++ VC_IMAGE_YUV_UV32, ++ /* VCIII T-format 8-bit luma */ ++ VC_IMAGE_TF_Y8, ++ /* VCIII T-format 8-bit alpha */ ++ VC_IMAGE_TF_A8, ++ /* VCIII T-format 16-bit generic sample */ ++ VC_IMAGE_TF_SHORT, ++ /* VCIII T-format 1bpp black/white */ ++ VC_IMAGE_TF_1BPP, ++ VC_IMAGE_OPENGL, ++ /* VCIII-B0 HVS YUV 4:4:4 interleaved samples */ ++ VC_IMAGE_YUV444I, ++ /* Y, U, & V planes separately (VC_IMAGE_YUV422 has them interleaved on ++ * a per line basis) ++ */ ++ VC_IMAGE_YUV422PLANAR, ++ /* 32bpp with 8bit alpha at MS byte, with R, G, B (LS byte) */ ++ VC_IMAGE_ARGB8888, ++ /* 32bpp with 8bit unused at MS byte, with R, G, B (LS byte) */ ++ VC_IMAGE_XRGB8888, ++ ++ /* interleaved 8 bit samples of Y, U, Y, V (4 flavours) */ ++ VC_IMAGE_YUV422YUYV, ++ VC_IMAGE_YUV422YVYU, ++ VC_IMAGE_YUV422UYVY, ++ VC_IMAGE_YUV422VYUY, ++ ++ /* 32bpp like RGBA32 but with unused alpha */ ++ VC_IMAGE_RGBX32, ++ /* 32bpp, corresponding to RGBA with unused alpha */ ++ VC_IMAGE_RGBX8888, ++ /* 32bpp, corresponding to BGRA with unused alpha */ ++ VC_IMAGE_BGRX8888, ++ ++ /* Y as a plane, then UV byte interleaved in plane with same pitch, ++ * half height ++ */ ++ VC_IMAGE_YUV420SP, ++ ++ /* Y, U, & V planes separately 4:4:4 */ ++ VC_IMAGE_YUV444PLANAR, ++ ++ /* T-format 8-bit U - same as TF_Y8 buf from U plane */ ++ VC_IMAGE_TF_U8, ++ /* T-format 8-bit U - same as TF_Y8 buf from V plane */ ++ VC_IMAGE_TF_V8, ++ ++ /* YUV4:2:0 planar, 16bit values */ ++ VC_IMAGE_YUV420_16, ++ /* YUV4:2:0 codec format, 16bit values */ ++ VC_IMAGE_YUV_UV_16, ++ /* YUV4:2:0 with U,V in side-by-side format */ ++ VC_IMAGE_YUV420_S, ++ /* 10-bit YUV 420 column image format */ ++ VC_IMAGE_YUV10COL, ++ /* 32-bpp, 10-bit R/G/B, 2-bit Alpha */ ++ VC_IMAGE_RGBA1010102, ++ ++ VC_IMAGE_MAX, /* bounds for error checking */ ++ VC_IMAGE_FORCE_ENUM_16BIT = 0xffff, ++}; ++ ++enum { ++ /* Unknown or unset - defaults to BT601 interstitial */ ++ VC_IMAGE_YUVINFO_UNSPECIFIED = 0, ++ ++ /* colour-space conversions data [4 bits] */ ++ ++ /* ITU-R BT.601-5 [SDTV] (compatible with VideoCore-II) */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT601 = 1, ++ /* ITU-R BT.709-3 [HDTV] */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT709 = 2, ++ /* JPEG JFIF */ ++ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF = 3, ++ /* Title 47 Code of Federal Regulations (2003) 73.682 (a) (20) */ ++ VC_IMAGE_YUVINFO_CSC_FCC = 4, ++ /* Society of Motion Picture and Television Engineers 240M (1999) */ ++ VC_IMAGE_YUVINFO_CSC_SMPTE_240M = 5, ++ /* ITU-R BT.470-2 System M */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT470_2_M = 6, ++ /* ITU-R BT.470-2 System B,G */ ++ VC_IMAGE_YUVINFO_CSC_ITUR_BT470_2_BG = 7, ++ /* JPEG JFIF, but with 16..255 luma */ ++ VC_IMAGE_YUVINFO_CSC_JPEG_JFIF_Y16_255 = 8, ++ /* Rec 2020 */ ++ VC_IMAGE_YUVINFO_CSC_REC_2020 = 9, ++}; diff --git a/target/linux/bcm27xx/patches-6.1/950-0012-drm-vc4-Add-support-for-gamma-on-BCM2711.patch b/target/linux/bcm27xx/patches-6.1/950-0012-drm-vc4-Add-support-for-gamma-on-BCM2711.patch new file mode 100644 index 0000000000..1ec4c4252e --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0012-drm-vc4-Add-support-for-gamma-on-BCM2711.patch @@ -0,0 +1,276 @@ +From 387b65c16c0d763ee4610675ce61e1072fa6cd72 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 27 Apr 2021 14:24:21 +0200 +Subject: [PATCH] drm/vc4: Add support for gamma on BCM2711 + +BCM2711 changes from a 256 entry lookup table to a 16 point +piecewise linear function as the pipeline bitdepth has increased +to make a LUT unwieldy. + +Implement a simple conversion from a 256 entry LUT that userspace +is likely to expect to 16 evenly spread points in the PWL. This +could be improved with curve fitting at a later date. + +Co-developed-by: Juerg Haefliger +Signed-off-by: Juerg Haefliger +Signed-off-by: Dave Stevenson +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 35 ++++++++++--- + drivers/gpu/drm/vc4/vc4_drv.h | 28 +++++++++-- + drivers/gpu/drm/vc4/vc4_hvs.c | 89 ++++++++++++++++++++++++++++++++-- + drivers/gpu/drm/vc4/vc4_regs.h | 22 +++++++++ + 4 files changed, 162 insertions(+), 12 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -1326,19 +1326,42 @@ int vc4_crtc_init(struct drm_device *drm + + if (!vc4->is_vc5) { + drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r)); ++ } else { ++ /* This is a lie for hvs5 which uses a 16 point PWL, but it ++ * allows for something smarter than just 16 linearly spaced ++ * segments. Conversion is done in vc5_hvs_update_gamma_lut. ++ */ ++ drm_mode_crtc_set_gamma_size(crtc, 256); ++ } + +- drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size); ++ drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size); + ++ if (!vc4->is_vc5) { + /* We support CTM, but only for one CRTC at a time. It's therefore + * implemented as private driver state in vc4_kms, not here. + */ + drm_crtc_enable_color_mgmt(crtc, 0, true, crtc->gamma_size); +- } + +- for (i = 0; i < crtc->gamma_size; i++) { +- vc4_crtc->lut_r[i] = i; +- vc4_crtc->lut_g[i] = i; +- vc4_crtc->lut_b[i] = i; ++ /* Initialize the VC4 gamma LUTs */ ++ for (i = 0; i < crtc->gamma_size; i++) { ++ vc4_crtc->lut_r[i] = i; ++ vc4_crtc->lut_g[i] = i; ++ vc4_crtc->lut_b[i] = i; ++ } ++ } else { ++ /* Initialize the VC5 gamma PWL entries. Assume 12-bit pipeline, ++ * evenly spread over full range. ++ */ ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++) { ++ vc4_crtc->pwl_r[i] = ++ VC5_HVS_SET_GAMMA_ENTRY(i << 8, i << 12, 1 << 8); ++ vc4_crtc->pwl_g[i] = ++ VC5_HVS_SET_GAMMA_ENTRY(i << 8, i << 12, 1 << 8); ++ vc4_crtc->pwl_b[i] = ++ VC5_HVS_SET_GAMMA_ENTRY(i << 8, i << 12, 1 << 8); ++ vc4_crtc->pwl_a[i] = ++ VC5_HVS_SET_GAMMA_ENTRY(i << 8, i << 12, 1 << 8); ++ } + } + + return 0; +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -20,6 +20,7 @@ + #include + + #include "uapi/drm/vc4_drm.h" ++#include "vc4_regs.h" + + struct drm_device; + struct drm_gem_object; +@@ -481,6 +482,17 @@ struct vc4_pv_data { + enum vc4_encoder_type encoder_types[4]; + }; + ++struct vc5_gamma_entry { ++ u32 x_c_terms; ++ u32 grad_term; ++}; ++ ++#define VC5_HVS_SET_GAMMA_ENTRY(x, c, g) (struct vc5_gamma_entry){ \ ++ .x_c_terms = VC4_SET_FIELD((x), SCALER5_DSPGAMMA_OFF_X) | \ ++ VC4_SET_FIELD((c), SCALER5_DSPGAMMA_OFF_C), \ ++ .grad_term = (g) \ ++} ++ + struct vc4_crtc { + struct drm_crtc base; + struct platform_device *pdev; +@@ -490,9 +502,19 @@ struct vc4_crtc { + /* Timestamp at start of vblank irq - unaffected by lock delays. */ + ktime_t t_vblank; + +- u8 lut_r[256]; +- u8 lut_g[256]; +- u8 lut_b[256]; ++ union { ++ struct { /* VC4 gamma LUT */ ++ u8 lut_r[256]; ++ u8 lut_g[256]; ++ u8 lut_b[256]; ++ }; ++ struct { /* VC5 gamma PWL entries */ ++ struct vc5_gamma_entry pwl_r[SCALER5_DSPGAMMA_NUM_POINTS]; ++ struct vc5_gamma_entry pwl_g[SCALER5_DSPGAMMA_NUM_POINTS]; ++ struct vc5_gamma_entry pwl_b[SCALER5_DSPGAMMA_NUM_POINTS]; ++ struct vc5_gamma_entry pwl_a[SCALER5_DSPGAMMA_NUM_POINTS]; ++ }; ++ }; + + struct drm_pending_vblank_event *event; + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -241,7 +241,8 @@ static void vc4_hvs_lut_load(struct vc4_ + static void vc4_hvs_update_gamma_lut(struct vc4_hvs *hvs, + struct vc4_crtc *vc4_crtc) + { +- struct drm_crtc_state *crtc_state = vc4_crtc->base.state; ++ struct drm_crtc *crtc = &vc4_crtc->base; ++ struct drm_crtc_state *crtc_state = crtc->state; + struct drm_color_lut *lut = crtc_state->gamma_lut->data; + u32 length = drm_color_lut_size(crtc_state->gamma_lut); + u32 i; +@@ -255,6 +256,81 @@ static void vc4_hvs_update_gamma_lut(str + vc4_hvs_lut_load(hvs, vc4_crtc); + } + ++static void vc5_hvs_write_gamma_entry(struct vc4_hvs *hvs, ++ u32 offset, ++ struct vc5_gamma_entry *gamma) ++{ ++ HVS_WRITE(offset, gamma->x_c_terms); ++ HVS_WRITE(offset + 4, gamma->grad_term); ++} ++ ++static void vc5_hvs_lut_load(struct vc4_hvs *hvs, ++ struct vc4_crtc *vc4_crtc) ++{ ++ struct drm_crtc *crtc = &vc4_crtc->base; ++ struct drm_crtc_state *crtc_state = crtc->state; ++ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state); ++ u32 i; ++ u32 offset = SCALER5_DSPGAMMA_START + ++ vc4_state->assigned_channel * SCALER5_DSPGAMMA_CHAN_OFFSET; ++ ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) ++ vc5_hvs_write_gamma_entry(hvs, offset, &vc4_crtc->pwl_r[i]); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) ++ vc5_hvs_write_gamma_entry(hvs, offset, &vc4_crtc->pwl_g[i]); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) ++ vc5_hvs_write_gamma_entry(hvs, offset, &vc4_crtc->pwl_b[i]); ++ ++ if (vc4_state->assigned_channel == 2) { ++ /* Alpha only valid on channel 2 */ ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) ++ vc5_hvs_write_gamma_entry(hvs, offset, &vc4_crtc->pwl_a[i]); ++ } ++} ++ ++static void vc5_hvs_update_gamma_lut(struct vc4_hvs *hvs, ++ struct vc4_crtc *vc4_crtc) ++{ ++ struct drm_crtc *crtc = &vc4_crtc->base; ++ struct drm_color_lut *lut = crtc->state->gamma_lut->data; ++ unsigned int step, i; ++ u32 start, end; ++ ++#define VC5_HVS_UPDATE_GAMMA_ENTRY_FROM_LUT(pwl, chan) \ ++ start = drm_color_lut_extract(lut[i * step].chan, 12); \ ++ end = drm_color_lut_extract(lut[(i + 1) * step - 1].chan, 12); \ ++ \ ++ /* Negative gradients not permitted by the hardware, so \ ++ * flatten such points out. \ ++ */ \ ++ if (end < start) \ ++ end = start; \ ++ \ ++ /* Assume 12bit pipeline. \ ++ * X evenly spread over full range (12 bit). \ ++ * C as U12.4 format. \ ++ * Gradient as U4.8 format. \ ++ */ \ ++ vc4_crtc->pwl[i] = \ ++ VC5_HVS_SET_GAMMA_ENTRY(i << 8, start << 4, \ ++ ((end - start) << 4) / (step - 1)) ++ ++ /* HVS5 has a 16 point piecewise linear function for each colour ++ * channel (including alpha on channel 2) on each display channel. ++ * ++ * Currently take a crude subsample of the gamma LUT, but this could ++ * be improved to implement curve fitting. ++ */ ++ step = crtc->gamma_size / SCALER5_DSPGAMMA_NUM_POINTS; ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++) { ++ VC5_HVS_UPDATE_GAMMA_ENTRY_FROM_LUT(pwl_r, red); ++ VC5_HVS_UPDATE_GAMMA_ENTRY_FROM_LUT(pwl_g, green); ++ VC5_HVS_UPDATE_GAMMA_ENTRY_FROM_LUT(pwl_b, blue); ++ } ++ ++ vc5_hvs_lut_load(hvs, vc4_crtc); ++} ++ + u8 vc4_hvs_get_fifo_frame_count(struct vc4_hvs *hvs, unsigned int fifo) + { + struct drm_device *drm = &hvs->vc4->base; +@@ -398,7 +474,10 @@ static int vc4_hvs_init_channel(struct v + /* Reload the LUT, since the SRAMs would have been disabled if + * all CRTCs had SCALER_DISPBKGND_GAMMA unset at once. + */ +- vc4_hvs_lut_load(hvs, vc4_crtc); ++ if (!vc4->is_vc5) ++ vc4_hvs_lut_load(hvs, vc4_crtc); ++ else ++ vc5_hvs_lut_load(hvs, vc4_crtc); + + drm_dev_exit(idx); + +@@ -628,7 +707,11 @@ void vc4_hvs_atomic_flush(struct drm_crt + u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(channel)); + + if (crtc->state->gamma_lut) { +- vc4_hvs_update_gamma_lut(hvs, vc4_crtc); ++ if (!vc4->is_vc5) ++ vc4_hvs_update_gamma_lut(hvs, vc4_crtc); ++ else ++ vc5_hvs_update_gamma_lut(hvs, vc4_crtc); ++ + dispbkgndx |= SCALER_DISPBKGND_GAMMA; + } else { + /* Unsetting DISPBKGND_GAMMA skips the gamma lut step +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -512,6 +512,28 @@ + #define SCALER_DLIST_START 0x00002000 + #define SCALER_DLIST_SIZE 0x00004000 + ++/* Gamma PWL for each channel. 16 points for each of 4 colour channels (alpha ++ * only on channel 2). 8 bytes per entry, offsets first, then gradient: ++ * Y = GRAD * X + C ++ * ++ * Values for X and C are left justified, and vary depending on the width of ++ * the HVS channel: ++ * 8-bit pipeline: X uses [31:24], C is U8.8 format, and GRAD is U4.8. ++ * 12-bit pipeline: X uses [31:20], C is U12.4 format, and GRAD is U4.8. ++ * ++ * The 3 HVS channels start at 0x400 offsets (ie chan 1 starts at 0x2400, and ++ * chan 2 at 0x2800). ++ */ ++#define SCALER5_DSPGAMMA_NUM_POINTS 16 ++#define SCALER5_DSPGAMMA_START 0x00002000 ++#define SCALER5_DSPGAMMA_CHAN_OFFSET 0x400 ++# define SCALER5_DSPGAMMA_OFF_X_MASK VC4_MASK(31, 20) ++# define SCALER5_DSPGAMMA_OFF_X_SHIFT 20 ++# define SCALER5_DSPGAMMA_OFF_C_MASK VC4_MASK(15, 0) ++# define SCALER5_DSPGAMMA_OFF_C_SHIFT 0 ++# define SCALER5_DSPGAMMA_GRAD_MASK VC4_MASK(11, 0) ++# define SCALER5_DSPGAMMA_GRAD_SHIFT 0 ++ + #define SCALER5_DLIST_START 0x00004000 + + # define VC4_HDMI_SW_RESET_FORMAT_DETECT BIT(1) diff --git a/target/linux/bcm27xx/patches-6.1/950-0013-drm-vc4-Add-debugfs-node-that-dumps-the-vc5-gamma-PW.patch b/target/linux/bcm27xx/patches-6.1/950-0013-drm-vc4-Add-debugfs-node-that-dumps-the-vc5-gamma-PW.patch new file mode 100644 index 0000000000..4b4dcb64df --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0013-drm-vc4-Add-debugfs-node-that-dumps-the-vc5-gamma-PW.patch @@ -0,0 +1,122 @@ +From 3905be68859b15731ec41b3d22cd1a9069375f7f Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 28 Apr 2021 12:32:10 +0200 +Subject: [PATCH] drm/vc4: Add debugfs node that dumps the vc5 gamma + PWL entries + +This helps with debugging the conversion from a 256 point gamma LUT to +16 point PWL entries as used by the BCM2711. + +Co-developed-by: Juerg Haefliger +Signed-off-by: Juerg Haefliger +Signed-off-by: Dave Stevenson +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 85 ++++++++++++++++++++++++++++++++++- + 1 file changed, 84 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -141,6 +141,85 @@ static int vc4_hvs_debugfs_dlist(struct + return 0; + } + ++static int vc5_hvs_debugfs_gamma(struct seq_file *m, void *data) ++{ ++ struct drm_info_node *node = m->private; ++ struct drm_device *dev = node->minor->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ struct vc4_hvs *hvs = vc4->hvs; ++ struct drm_printer p = drm_seq_file_printer(m); ++ unsigned int i, chan; ++ u32 dispstat, dispbkgndx; ++ ++ for (chan = 0; chan < SCALER_CHANNELS_COUNT; chan++) { ++ u32 x_c, grad; ++ u32 offset = SCALER5_DSPGAMMA_START + ++ chan * SCALER5_DSPGAMMA_CHAN_OFFSET; ++ ++ dispstat = VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan)), ++ SCALER_DISPSTATX_MODE); ++ if (dispstat == SCALER_DISPSTATX_MODE_DISABLED || ++ dispstat == SCALER_DISPSTATX_MODE_EOF) { ++ drm_printf(&p, "HVS channel %u: Channel disabled\n", chan); ++ continue; ++ } ++ ++ dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(chan)); ++ if (!(dispbkgndx & SCALER_DISPBKGND_GAMMA)) { ++ drm_printf(&p, "HVS channel %u: Gamma disabled\n", chan); ++ continue; ++ } ++ ++ drm_printf(&p, "HVS channel %u:\n", chan); ++ drm_printf(&p, " red:\n"); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) { ++ x_c = HVS_READ(offset); ++ grad = HVS_READ(offset + 4); ++ drm_printf(&p, " %08x %08x - x %u, c %u, grad %u\n", ++ x_c, grad, ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_X), ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_C), ++ grad); ++ } ++ drm_printf(&p, " green:\n"); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) { ++ x_c = HVS_READ(offset); ++ grad = HVS_READ(offset + 4); ++ drm_printf(&p, " %08x %08x - x %u, c %u, grad %u\n", ++ x_c, grad, ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_X), ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_C), ++ grad); ++ } ++ drm_printf(&p, " blue:\n"); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) { ++ x_c = HVS_READ(offset); ++ grad = HVS_READ(offset + 4); ++ drm_printf(&p, " %08x %08x - x %u, c %u, grad %u\n", ++ x_c, grad, ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_X), ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_C), ++ grad); ++ } ++ ++ /* Alpha only valid on channel 2 */ ++ if (chan != 2) ++ continue; ++ ++ drm_printf(&p, " alpha:\n"); ++ for (i = 0; i < SCALER5_DSPGAMMA_NUM_POINTS; i++, offset += 8) { ++ x_c = HVS_READ(offset); ++ grad = HVS_READ(offset + 4); ++ drm_printf(&p, " %08x %08x - x %u, c %u, grad %u\n", ++ x_c, grad, ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_X), ++ VC4_GET_FIELD(x_c, SCALER5_DSPGAMMA_OFF_C), ++ grad); ++ } ++ } ++ return 0; ++} ++ + /* The filter kernel is composed of dwords each containing 3 9-bit + * signed integers packed next to each other. + */ +@@ -833,11 +912,15 @@ int vc4_hvs_debugfs_init(struct drm_mino + if (!vc4->hvs) + return -ENODEV; + +- if (!vc4->is_vc5) ++ if (!vc4->is_vc5) { + debugfs_create_bool("hvs_load_tracker", S_IRUGO | S_IWUSR, + minor->debugfs_root, + &vc4->load_tracker_enabled); + ++ vc4_debugfs_add_file(minor, "hvs_gamma", vc5_hvs_debugfs_gamma, ++ NULL); ++ } ++ + ret = vc4_debugfs_add_file(minor, "hvs_dlists", + vc4_hvs_debugfs_dlist, NULL); + if (ret) diff --git a/target/linux/bcm27xx/patches-6.1/950-0014-drm-vc4-hvs-Force-modeset-on-gamma-lut-change.patch b/target/linux/bcm27xx/patches-6.1/950-0014-drm-vc4-hvs-Force-modeset-on-gamma-lut-change.patch new file mode 100644 index 0000000000..cb6f834861 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0014-drm-vc4-hvs-Force-modeset-on-gamma-lut-change.patch @@ -0,0 +1,105 @@ +From 132865ef0ce76d66a27152eee131ba4335639df4 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 14 Jun 2021 15:28:30 +0200 +Subject: [PATCH] drm/vc4: hvs: Force modeset on gamma lut change + +The HVS Gamma block can only be updated when idle, so we need to disable +the HVS channel when the gamma property is set in an atomic commit. + +Since the pixelvalve cannot have its assigned channel halted without +stalling unless it's disabled as well, in our case that means forcing a +full disable / enable cycle on the pipeline. + +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 17 +++++++++++++++++ + drivers/gpu/drm/vc4/vc4_drv.h | 3 +++ + drivers/gpu/drm/vc4/vc4_hvs.c | 32 +++++++++++++++++++++++++++++++- + 3 files changed, 51 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -293,6 +293,23 @@ struct drm_encoder *vc4_get_crtc_encoder + return NULL; + } + ++#define drm_for_each_connector_mask(connector, dev, connector_mask) \ ++ list_for_each_entry((connector), &(dev)->mode_config.connector_list, head) \ ++ for_each_if ((connector_mask) & drm_connector_mask(connector)) ++ ++struct drm_connector *vc4_get_crtc_connector(struct drm_crtc *crtc, ++ struct drm_crtc_state *state) ++{ ++ struct drm_connector *connector; ++ ++ WARN_ON(hweight32(state->connector_mask) > 1); ++ ++ drm_for_each_connector_mask(connector, crtc->dev, state->connector_mask) ++ return connector; ++ ++ return NULL; ++} ++ + static void vc4_crtc_pixelvalve_reset(struct drm_crtc *crtc) + { + struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc); +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -568,6 +568,9 @@ vc4_crtc_to_vc4_pv_data(const struct vc4 + return container_of(data, struct vc4_pv_data, base); + } + ++struct drm_connector *vc4_get_crtc_connector(struct drm_crtc *crtc, ++ struct drm_crtc_state *state); ++ + struct drm_encoder *vc4_get_crtc_encoder(struct drm_crtc *crtc, + struct drm_crtc_state *state); + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -594,6 +594,36 @@ out: + drm_dev_exit(idx); + } + ++static int vc4_hvs_gamma_check(struct drm_crtc *crtc, ++ struct drm_atomic_state *state) ++{ ++ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ++ struct drm_connector_state *conn_state; ++ struct drm_connector *connector; ++ struct drm_device *dev = crtc->dev; ++ struct vc4_dev *vc4 = to_vc4_dev(dev); ++ ++ if (!vc4->is_vc5) ++ return 0; ++ ++ if (!crtc_state->color_mgmt_changed) ++ return 0; ++ ++ connector = vc4_get_crtc_connector(crtc, crtc_state); ++ if (!connector) ++ return -EINVAL; ++ ++ if (!(connector->connector_type == DRM_MODE_CONNECTOR_HDMIA)) ++ return 0; ++ ++ conn_state = drm_atomic_get_connector_state(state, connector); ++ if (!conn_state) ++ return -EINVAL; ++ ++ crtc_state->mode_changed = true; ++ return 0; ++} ++ + int vc4_hvs_atomic_check(struct drm_crtc *crtc, struct drm_atomic_state *state) + { + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); +@@ -624,7 +654,7 @@ int vc4_hvs_atomic_check(struct drm_crtc + if (ret) + return ret; + +- return 0; ++ return vc4_hvs_gamma_check(crtc, state); + } + + static void vc4_hvs_install_dlist(struct drm_crtc *crtc) diff --git a/target/linux/bcm27xx/patches-6.1/950-0015-drm-vc4-Relax-VEC-modeline-requirements-and-add-prog.patch b/target/linux/bcm27xx/patches-6.1/950-0015-drm-vc4-Relax-VEC-modeline-requirements-and-add-prog.patch new file mode 100644 index 0000000000..9b7bc332ef --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0015-drm-vc4-Relax-VEC-modeline-requirements-and-add-prog.patch @@ -0,0 +1,149 @@ +From a4614b6f6c4e3a9ef80c88f272c1503b91f7ef8c Mon Sep 17 00:00:00 2001 +From: Mateusz Kwiatkowski +Date: Thu, 15 Jul 2021 01:08:08 +0200 +Subject: [PATCH] drm/vc4: Relax VEC modeline requirements and add + progressive mode support + +Make vc4_vec_encoder_atomic_check() accept arbitrary modelines, as long +as they result in somewhat sane output from the VEC. The bounds have +been determined empirically. Additionally, add support for the +progressive 262-line and 312-line modes. + +Signed-off-by: Mateusz Kwiatkowski +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 1 + + drivers/gpu/drm/vc4/vc4_vec.c | 94 ++++++++++++++++++++++++++++++---- + 2 files changed, 85 insertions(+), 10 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -422,6 +422,7 @@ static void vc4_crtc_config_pv(struct dr + CRTC_WRITE(PV_V_CONTROL, + PV_VCONTROL_CONTINUOUS | + (is_dsi ? PV_VCONTROL_DSI : 0)); ++ CRTC_WRITE(PV_VSYNCD_EVEN, 0); + } + + CRTC_WRITE(PV_VERTA, +--- a/drivers/gpu/drm/vc4/vc4_vec.c ++++ b/drivers/gpu/drm/vc4/vc4_vec.c +@@ -400,18 +400,11 @@ static int vc4_vec_connector_atomic_chec + struct drm_connector_state *new_state = + drm_atomic_get_new_connector_state(state, conn); + +- const struct vc4_vec_tv_mode *vec_mode = +- &vc4_vec_tv_modes[new_state->tv.mode]; +- +- if (new_state->crtc) { ++ if (new_state->crtc && old_state->tv.mode != new_state->tv.mode) { + struct drm_crtc_state *crtc_state = + drm_atomic_get_new_crtc_state(state, new_state->crtc); + +- if (!drm_mode_equal(vec_mode->mode, &crtc_state->mode)) +- return -EINVAL; +- +- if (old_state->tv.mode != new_state->tv.mode) +- crtc_state->mode_changed = true; ++ crtc_state->mode_changed = true; + } + + return 0; +@@ -546,7 +539,10 @@ static void vc4_vec_encoder_enable(struc + VEC_WRITE(VEC_CLMP0_START, 0xac); + VEC_WRITE(VEC_CLMP0_END, 0xec); + VEC_WRITE(VEC_CONFIG2, +- VEC_CONFIG2_UV_DIG_DIS | VEC_CONFIG2_RGB_DIG_DIS); ++ VEC_CONFIG2_UV_DIG_DIS | ++ VEC_CONFIG2_RGB_DIG_DIS | ++ ((encoder->crtc->state->adjusted_mode.flags & ++ DRM_MODE_FLAG_INTERLACE) ? 0 : VEC_CONFIG2_PROG_SCAN)); + VEC_WRITE(VEC_CONFIG3, VEC_CONFIG3_HORIZ_LEN_STD); + VEC_WRITE(VEC_DAC_CONFIG, vec->variant->dac_config); + +@@ -575,8 +571,86 @@ err_put_runtime_pm: + err_dev_exit: + drm_dev_exit(idx); + } ++static int vc4_vec_encoder_atomic_check(struct drm_encoder *encoder, ++ struct drm_crtc_state *crtc_state, ++ struct drm_connector_state *conn_state) ++{ ++ const struct drm_display_mode *reference_mode = ++ vc4_vec_tv_modes[conn_state->tv.mode].mode; ++ ++ if (crtc_state->adjusted_mode.crtc_clock != reference_mode->clock || ++ crtc_state->adjusted_mode.crtc_htotal != reference_mode->htotal || ++ crtc_state->adjusted_mode.crtc_hdisplay % 4 != 0 || ++ crtc_state->adjusted_mode.crtc_hsync_end - ++ crtc_state->adjusted_mode.crtc_hsync_start < 1) ++ return -EINVAL; ++ ++ switch (reference_mode->vtotal) { ++ case 525: ++ if (crtc_state->adjusted_mode.crtc_vdisplay < 1 || ++ crtc_state->adjusted_mode.crtc_vdisplay > 253 || ++ crtc_state->adjusted_mode.crtc_vsync_start - ++ crtc_state->adjusted_mode.crtc_vdisplay < 1 || ++ crtc_state->adjusted_mode.crtc_vsync_end - ++ crtc_state->adjusted_mode.crtc_vsync_start != 3 || ++ crtc_state->adjusted_mode.crtc_vtotal - ++ crtc_state->adjusted_mode.crtc_vsync_end < 4 || ++ crtc_state->adjusted_mode.crtc_vtotal > 262) ++ return -EINVAL; ++ ++ if ((crtc_state->adjusted_mode.flags & ++ DRM_MODE_FLAG_INTERLACE) && ++ (crtc_state->adjusted_mode.vdisplay % 2 != 0 || ++ crtc_state->adjusted_mode.vsync_start % 2 != 1 || ++ crtc_state->adjusted_mode.vsync_end % 2 != 1 || ++ crtc_state->adjusted_mode.vtotal % 2 != 1)) ++ return -EINVAL; ++ ++ /* progressive mode is hard-wired to 262 total lines */ ++ if (!(crtc_state->adjusted_mode.flags & ++ DRM_MODE_FLAG_INTERLACE) && ++ crtc_state->adjusted_mode.crtc_vtotal != 262) ++ return -EINVAL; ++ ++ break; ++ ++ case 625: ++ if (crtc_state->adjusted_mode.crtc_vdisplay < 1 || ++ crtc_state->adjusted_mode.crtc_vdisplay > 305 || ++ crtc_state->adjusted_mode.crtc_vsync_start - ++ crtc_state->adjusted_mode.crtc_vdisplay < 1 || ++ crtc_state->adjusted_mode.crtc_vsync_end - ++ crtc_state->adjusted_mode.crtc_vsync_start != 3 || ++ crtc_state->adjusted_mode.crtc_vtotal - ++ crtc_state->adjusted_mode.crtc_vsync_end < 2 || ++ crtc_state->adjusted_mode.crtc_vtotal > 312) ++ return -EINVAL; ++ ++ if ((crtc_state->adjusted_mode.flags & ++ DRM_MODE_FLAG_INTERLACE) && ++ (crtc_state->adjusted_mode.vdisplay % 2 != 0 || ++ crtc_state->adjusted_mode.vsync_start % 2 != 0 || ++ crtc_state->adjusted_mode.vsync_end % 2 != 0 || ++ crtc_state->adjusted_mode.vtotal % 2 != 1)) ++ return -EINVAL; ++ ++ /* progressive mode is hard-wired to 312 total lines */ ++ if (!(crtc_state->adjusted_mode.flags & ++ DRM_MODE_FLAG_INTERLACE) && ++ crtc_state->adjusted_mode.crtc_vtotal != 312) ++ return -EINVAL; ++ ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} + + static const struct drm_encoder_helper_funcs vc4_vec_encoder_helper_funcs = { ++ .atomic_check = vc4_vec_encoder_atomic_check, + .atomic_disable = vc4_vec_encoder_disable, + .atomic_enable = vc4_vec_encoder_enable, + }; diff --git a/target/linux/bcm27xx/patches-6.1/950-0016-drm-vc4-Make-VEC-progressive-modes-readily-accessibl.patch b/target/linux/bcm27xx/patches-6.1/950-0016-drm-vc4-Make-VEC-progressive-modes-readily-accessibl.patch new file mode 100644 index 0000000000..43eab7edda --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0016-drm-vc4-Make-VEC-progressive-modes-readily-accessibl.patch @@ -0,0 +1,165 @@ +From bfd6f67af0450e29378d390386210ac91c5dcfce Mon Sep 17 00:00:00 2001 +From: Mateusz Kwiatkowski +Date: Thu, 15 Jul 2021 01:08:11 +0200 +Subject: [PATCH] drm/vc4: Make VEC progressive modes readily + accessible + +Add predefined modelines for the 240p (NTSC) and 288p (PAL) progressive +modes, and report them through vc4_vec_connector_get_modes(). + +Signed-off-by: Mateusz Kwiatkowski +--- + drivers/gpu/drm/vc4/vc4_vec.c | 73 ++++++++++++++++++++++++++--------- + 1 file changed, 55 insertions(+), 18 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_vec.c ++++ b/drivers/gpu/drm/vc4/vc4_vec.c +@@ -228,7 +228,8 @@ enum vc4_vec_tv_mode_id { + }; + + struct vc4_vec_tv_mode { +- const struct drm_display_mode *mode; ++ const struct drm_display_mode *interlaced_mode; ++ const struct drm_display_mode *progressive_mode; + u32 config0; + u32 config1; + u32 custom_freq; +@@ -262,61 +263,81 @@ static const struct debugfs_reg32 vec_re + }; + + static const struct drm_display_mode drm_mode_480i = { +- DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 13500, ++ DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 13500, + 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0, + 480, 480 + 7, 480 + 7 + 6, 525, 0, + DRM_MODE_FLAG_INTERLACE) + }; + ++static const struct drm_display_mode drm_mode_240p = { ++ DRM_MODE("720x240", DRM_MODE_TYPE_DRIVER, 13500, ++ 720, 720 + 14, 720 + 14 + 64, 720 + 14 + 64 + 60, 0, ++ 240, 240 + 3, 240 + 3 + 3, 262, 0, 0) ++}; ++ + static const struct drm_display_mode drm_mode_576i = { +- DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 13500, ++ DRM_MODE("720x576i", DRM_MODE_TYPE_DRIVER, 13500, + 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0, + 576, 576 + 4, 576 + 4 + 6, 625, 0, + DRM_MODE_FLAG_INTERLACE) + }; + ++static const struct drm_display_mode drm_mode_288p = { ++ DRM_MODE("720x288", DRM_MODE_TYPE_DRIVER, 13500, ++ 720, 720 + 20, 720 + 20 + 64, 720 + 20 + 64 + 60, 0, ++ 288, 288 + 2, 288 + 2 + 3, 312, 0, 0) ++}; ++ + static const struct vc4_vec_tv_mode vc4_vec_tv_modes[] = { + [VC4_VEC_TV_MODE_NTSC] = { +- .mode = &drm_mode_480i, ++ .interlaced_mode = &drm_mode_480i, ++ .progressive_mode = &drm_mode_240p, + .config0 = VEC_CONFIG0_NTSC_STD | VEC_CONFIG0_PDEN, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, + [VC4_VEC_TV_MODE_NTSC_J] = { +- .mode = &drm_mode_480i, ++ .interlaced_mode = &drm_mode_480i, ++ .progressive_mode = &drm_mode_240p, + .config0 = VEC_CONFIG0_NTSC_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, + [VC4_VEC_TV_MODE_NTSC_443] = { + /* NTSC with PAL chroma frequency */ +- .mode = &drm_mode_480i, ++ .interlaced_mode = &drm_mode_480i, ++ .progressive_mode = &drm_mode_240p, + .config0 = VEC_CONFIG0_NTSC_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ, + .custom_freq = 0x2a098acb, + }, + [VC4_VEC_TV_MODE_PAL] = { +- .mode = &drm_mode_576i, ++ .interlaced_mode = &drm_mode_576i, ++ .progressive_mode = &drm_mode_288p, + .config0 = VEC_CONFIG0_PAL_BDGHI_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, + [VC4_VEC_TV_MODE_PAL_M] = { +- .mode = &drm_mode_480i, ++ .interlaced_mode = &drm_mode_480i, ++ .progressive_mode = &drm_mode_240p, + .config0 = VEC_CONFIG0_PAL_M_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, + [VC4_VEC_TV_MODE_PAL_N] = { +- .mode = &drm_mode_576i, ++ .interlaced_mode = &drm_mode_576i, ++ .progressive_mode = &drm_mode_288p, + .config0 = VEC_CONFIG0_PAL_N_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + }, + [VC4_VEC_TV_MODE_PAL60] = { + /* PAL-M with chroma frequency of regular PAL */ +- .mode = &drm_mode_480i, ++ .interlaced_mode = &drm_mode_480i, ++ .progressive_mode = &drm_mode_240p, + .config0 = VEC_CONFIG0_PAL_M_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS | VEC_CONFIG1_CUSTOM_FREQ, + .custom_freq = 0x2a098acb, + }, + [VC4_VEC_TV_MODE_SECAM] = { +- .mode = &drm_mode_576i, ++ .interlaced_mode = &drm_mode_576i, ++ .progressive_mode = &drm_mode_288p, + .config0 = VEC_CONFIG0_SECAM_STD, + .config1 = VEC_CONFIG1_C_CVBS_CVBS, + .custom_freq = 0x29c71c72, +@@ -370,16 +391,32 @@ vc4_vec_connector_detect(struct drm_conn + static int vc4_vec_connector_get_modes(struct drm_connector *connector) + { + struct drm_connector_state *state = connector->state; +- struct drm_display_mode *mode; ++ struct drm_display_mode *interlaced_mode, *progressive_mode; + +- mode = drm_mode_duplicate(connector->dev, +- vc4_vec_tv_modes[state->tv.mode].mode); +- if (!mode) { ++ interlaced_mode = ++ drm_mode_duplicate(connector->dev, ++ vc4_vec_tv_modes[state->tv.mode].interlaced_mode); ++ progressive_mode = ++ drm_mode_duplicate(connector->dev, ++ vc4_vec_tv_modes[state->tv.mode].progressive_mode); ++ if (!interlaced_mode || !progressive_mode) { + DRM_ERROR("Failed to create a new display mode\n"); ++ drm_mode_destroy(connector->dev, interlaced_mode); ++ drm_mode_destroy(connector->dev, progressive_mode); + return -ENOMEM; + } + +- drm_mode_probed_add(connector, mode); ++ if (connector->cmdline_mode.specified && ++ connector->cmdline_mode.refresh_specified && ++ !connector->cmdline_mode.interlace) ++ /* progressive mode set at boot, let's make it preferred */ ++ progressive_mode->type |= DRM_MODE_TYPE_PREFERRED; ++ else ++ /* otherwise, interlaced mode is preferred */ ++ interlaced_mode->type |= DRM_MODE_TYPE_PREFERRED; ++ ++ drm_mode_probed_add(connector, interlaced_mode); ++ drm_mode_probed_add(connector, progressive_mode); + + return 1; + } +@@ -576,7 +613,7 @@ static int vc4_vec_encoder_atomic_check( + struct drm_connector_state *conn_state) + { + const struct drm_display_mode *reference_mode = +- vc4_vec_tv_modes[conn_state->tv.mode].mode; ++ vc4_vec_tv_modes[conn_state->tv.mode].interlaced_mode; + + if (crtc_state->adjusted_mode.crtc_clock != reference_mode->clock || + crtc_state->adjusted_mode.crtc_htotal != reference_mode->htotal || diff --git a/target/linux/bcm27xx/patches-6.1/950-0017-drm-Check-whether-the-gamma-lut-has-changed-before-u.patch b/target/linux/bcm27xx/patches-6.1/950-0017-drm-Check-whether-the-gamma-lut-has-changed-before-u.patch new file mode 100644 index 0000000000..c5b06b4442 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0017-drm-Check-whether-the-gamma-lut-has-changed-before-u.patch @@ -0,0 +1,30 @@ +From 39a1d2daa0440779a0790ca32543f30220b451da Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 2 Nov 2021 16:01:36 +0000 +Subject: [PATCH] drm: Check whether the gamma lut has changed before + updating + +drm_crtc_legacy_gamma_set updates the gamma_lut blob unconditionally, +which leads to unnecessary reprogramming of hardware. + +Check whether the blob contents has actually changed before +signalling that it has been updated. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/drm_color_mgmt.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/drm_color_mgmt.c ++++ b/drivers/gpu/drm/drm_color_mgmt.c +@@ -330,7 +330,9 @@ static int drm_crtc_legacy_gamma_set(str + replaced = drm_property_replace_blob(&crtc_state->degamma_lut, + use_gamma_lut ? NULL : blob); + replaced |= drm_property_replace_blob(&crtc_state->ctm, NULL); +- replaced |= drm_property_replace_blob(&crtc_state->gamma_lut, ++ if (!crtc_state->gamma_lut || !crtc_state->gamma_lut->data || ++ memcmp(crtc_state->gamma_lut->data, blob_data, blob->length)) ++ replaced |= drm_property_replace_blob(&crtc_state->gamma_lut, + use_gamma_lut ? blob : NULL); + crtc_state->color_mgmt_changed |= replaced; + diff --git a/target/linux/bcm27xx/patches-6.1/950-0018-drm-vc4-Enable-gamma-block-only-when-required.patch b/target/linux/bcm27xx/patches-6.1/950-0018-drm-vc4-Enable-gamma-block-only-when-required.patch new file mode 100644 index 0000000000..0a49472ddb --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0018-drm-vc4-Enable-gamma-block-only-when-required.patch @@ -0,0 +1,66 @@ +From 23c8491ac23b95c0557fc398f338ecc62393cf53 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 8 Nov 2021 17:32:45 +0000 +Subject: [PATCH] drm/vc4: Enable gamma block only when required. + +With HVS5 the gamma block is now only reprogrammed with +a disable/enable. Loading the table from vc4_hvs_init_channel +(called from vc4_hvs_atomic_enable) appears to be at an +invalid point in time and so isn't applied. + +Switch to enabling and disabling the gamma table instead. This +isn't safe if the pipeline is running, but it isn't now. +For HVS4 it is safe to enable and disable dynamically, so +adopt that approach there too. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 22 ++++++++++++++++------ + 1 file changed, 16 insertions(+), 6 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -546,8 +546,11 @@ static int vc4_hvs_init_channel(struct v + dispbkgndx &= ~SCALER_DISPBKGND_GAMMA; + dispbkgndx &= ~SCALER_DISPBKGND_INTERLACE; + ++ if (crtc->state->gamma_lut) ++ /* Enable gamma on if required */ ++ dispbkgndx |= SCALER_DISPBKGND_GAMMA; ++ + HVS_WRITE(SCALER_DISPBKGNDX(chan), dispbkgndx | +- ((!vc4->is_vc5) ? SCALER_DISPBKGND_GAMMA : 0) | + (interlace ? SCALER_DISPBKGND_INTERLACE : 0)); + + /* Reload the LUT, since the SRAMs would have been disabled if +@@ -816,18 +819,25 @@ void vc4_hvs_atomic_flush(struct drm_crt + u32 dispbkgndx = HVS_READ(SCALER_DISPBKGNDX(channel)); + + if (crtc->state->gamma_lut) { +- if (!vc4->is_vc5) ++ if (!vc4->is_vc5) { + vc4_hvs_update_gamma_lut(hvs, vc4_crtc); +- else ++ dispbkgndx |= SCALER_DISPBKGND_GAMMA; ++ } else { + vc5_hvs_update_gamma_lut(hvs, vc4_crtc); +- +- dispbkgndx |= SCALER_DISPBKGND_GAMMA; ++ } + } else { + /* Unsetting DISPBKGND_GAMMA skips the gamma lut step + * in hardware, which is the same as a linear lut that + * DRM expects us to use in absence of a user lut. ++ * ++ * Do NOT change state dynamically for hvs5 as it ++ * inserts a delay in the pipeline that will cause ++ * stalls if enabled/disabled whilst running. The other ++ * should already be disabling/enabling the pipeline ++ * when gamma changes. + */ +- dispbkgndx &= ~SCALER_DISPBKGND_GAMMA; ++ if (!vc4->is_vc5) ++ dispbkgndx &= ~SCALER_DISPBKGND_GAMMA; + } + HVS_WRITE(SCALER_DISPBKGNDX(channel), dispbkgndx); + } diff --git a/target/linux/bcm27xx/patches-6.1/950-0019-drm-vc4-Only-add-gamma-properties-once.patch b/target/linux/bcm27xx/patches-6.1/950-0019-drm-vc4-Only-add-gamma-properties-once.patch new file mode 100644 index 0000000000..c817b62877 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0019-drm-vc4-Only-add-gamma-properties-once.patch @@ -0,0 +1,26 @@ +From 7b997c4910042491c90202df414f0e574a320258 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 8 Nov 2021 18:25:49 +0000 +Subject: [PATCH] drm/vc4: Only add gamma properties once. + +Two calls were made to drm_crtc_enable_color_mgmt to add gamma +and CTM, however they were both set to add the gamma properties, +so they ended up added twice. + +Fixes: 766cc6b1f7fc "drm/vc4: Add CTM support" +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -1358,7 +1358,7 @@ int vc4_crtc_init(struct drm_device *drm + /* We support CTM, but only for one CRTC at a time. It's therefore + * implemented as private driver state in vc4_kms, not here. + */ +- drm_crtc_enable_color_mgmt(crtc, 0, true, crtc->gamma_size); ++ drm_crtc_enable_color_mgmt(crtc, 0, true, 0); + + /* Initialize the VC4 gamma LUTs */ + for (i = 0; i < crtc->gamma_size; i++) { diff --git a/target/linux/bcm27xx/patches-6.1/950-0020-drm-vc4-Validate-the-size-of-the-gamma_lut.patch b/target/linux/bcm27xx/patches-6.1/950-0020-drm-vc4-Validate-the-size-of-the-gamma_lut.patch new file mode 100644 index 0000000000..1d4ba76e70 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0020-drm-vc4-Validate-the-size-of-the-gamma_lut.patch @@ -0,0 +1,32 @@ +From fc4d71fb629da4be7fee128bced80b9625acf3bb Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 10 Nov 2021 16:36:12 +0000 +Subject: [PATCH] drm/vc4: Validate the size of the gamma_lut + +Add a check to vc4_hvs_gamma_check to ensure a new non-empty +gamma LUT is of the correct length before accepting it. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -612,6 +612,16 @@ static int vc4_hvs_gamma_check(struct dr + if (!crtc_state->color_mgmt_changed) + return 0; + ++ if (crtc_state->gamma_lut) { ++ unsigned int len = drm_color_lut_size(crtc_state->gamma_lut); ++ ++ if (len != crtc->gamma_size) { ++ DRM_DEBUG_KMS("Invalid LUT size; got %u, expected %u\n", ++ len, crtc->gamma_size); ++ return -EINVAL; ++ } ++ } ++ + connector = vc4_get_crtc_connector(crtc, crtc_state); + if (!connector) + return -EINVAL; diff --git a/target/linux/bcm27xx/patches-6.1/950-0021-drm-vc4-Disable-Gamma-control-on-HVS5-due-to-issues-.patch b/target/linux/bcm27xx/patches-6.1/950-0021-drm-vc4-Disable-Gamma-control-on-HVS5-due-to-issues-.patch new file mode 100644 index 0000000000..8b443b9d56 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0021-drm-vc4-Disable-Gamma-control-on-HVS5-due-to-issues-.patch @@ -0,0 +1,36 @@ +From bb3a24c168067c1813b9b607b6c44c43a4a889e8 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 13 Jan 2022 11:30:42 +0000 +Subject: [PATCH] drm/vc4: Disable Gamma control on HVS5 due to issues + writing the table + +Still under investigation, but the conditions under which the HVS +will accept values written to the gamma PWL are not straightforward. + +Disable gamma on HVS5 again until it can be resolved to avoid +gamma being enabled with an incorrect table. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 8 +------- + 1 file changed, 1 insertion(+), 7 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -1344,15 +1344,9 @@ int vc4_crtc_init(struct drm_device *drm + + if (!vc4->is_vc5) { + drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r)); +- } else { +- /* This is a lie for hvs5 which uses a 16 point PWL, but it +- * allows for something smarter than just 16 linearly spaced +- * segments. Conversion is done in vc5_hvs_update_gamma_lut. +- */ +- drm_mode_crtc_set_gamma_size(crtc, 256); ++ drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size); + } + +- drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size); + + if (!vc4->is_vc5) { + /* We support CTM, but only for one CRTC at a time. It's therefore diff --git a/target/linux/bcm27xx/patches-6.1/950-0022-drm-vc4_hdmi-Add-Broadcast-RGB-property-to-allow-ove.patch b/target/linux/bcm27xx/patches-6.1/950-0022-drm-vc4_hdmi-Add-Broadcast-RGB-property-to-allow-ove.patch new file mode 100644 index 0000000000..60a96ca8e4 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0022-drm-vc4_hdmi-Add-Broadcast-RGB-property-to-allow-ove.patch @@ -0,0 +1,223 @@ +From b975642ea1ebaf66f6ed0ac403dfa82fa9d0e206 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 8 Apr 2020 16:12:02 +0100 +Subject: [PATCH] drm/vc4_hdmi: Add Broadcast RGB property to allow + override of RGB range + +Copy Intel's "Broadcast RGB" property semantics to add manual override +of the HDMI pixel range for monitors that don't abide by the content +of the AVI Infoframe. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 104 +++++++++++++++++++++++++++++++++ + drivers/gpu/drm/vc4/vc4_hdmi.h | 15 +++++ + 2 files changed, 119 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -57,6 +57,14 @@ + #include "vc4_hdmi_regs.h" + #include "vc4_regs.h" + ++/* ++ * "Broadcast RGB" property. ++ * Allows overriding of HDMI full or limited range RGB ++ */ ++#define VC4_BROADCAST_RGB_AUTO 0 ++#define VC4_BROADCAST_RGB_FULL 1 ++#define VC4_BROADCAST_RGB_LIMITED 2 ++ + #define VC5_HDMI_HORZA_HFP_SHIFT 16 + #define VC5_HDMI_HORZA_HFP_MASK VC4_MASK(28, 16) + #define VC5_HDMI_HORZA_VPOS BIT(15) +@@ -155,6 +163,11 @@ static bool vc4_hdmi_is_full_range_rgb(s + { + struct drm_display_info *display = &vc4_hdmi->connector.display_info; + ++ if (vc4_hdmi->broadcast_rgb == VC4_BROADCAST_RGB_LIMITED) ++ return false; ++ else if (vc4_hdmi->broadcast_rgb == VC4_BROADCAST_RGB_FULL) ++ return true; ++ + return !display->is_hdmi || + drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_FULL; + } +@@ -544,6 +557,65 @@ static int vc4_hdmi_connector_atomic_che + return 0; + } + ++/** ++ * vc4_hdmi_connector_atomic_get_property - hook for ++ * connector->atomic_get_property. ++ * @connector: Connector to get the property for. ++ * @state: Connector state to retrieve the property from. ++ * @property: Property to retrieve. ++ * @val: Return value for the property. ++ * ++ * Returns the atomic property value for a digital connector. ++ */ ++int vc4_hdmi_connector_get_property(struct drm_connector *connector, ++ const struct drm_connector_state *state, ++ struct drm_property *property, ++ uint64_t *val) ++{ ++ struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector); ++ const struct vc4_hdmi_connector_state *vc4_conn_state = ++ const_conn_state_to_vc4_hdmi_conn_state(state); ++ ++ if (property == vc4_hdmi->broadcast_rgb_property) { ++ *val = vc4_conn_state->broadcast_rgb; ++ } else { ++ DRM_DEBUG_ATOMIC("Unknown property [PROP:%d:%s]\n", ++ property->base.id, property->name); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * vc4_hdmi_connector_atomic_set_property - hook for ++ * connector->atomic_set_property. ++ * @connector: Connector to set the property for. ++ * @state: Connector state to set the property on. ++ * @property: Property to set. ++ * @val: New value for the property. ++ * ++ * Sets the atomic property value for a digital connector. ++ */ ++int vc4_hdmi_connector_set_property(struct drm_connector *connector, ++ struct drm_connector_state *state, ++ struct drm_property *property, ++ uint64_t val) ++{ ++ struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector); ++ struct vc4_hdmi_connector_state *vc4_conn_state = ++ conn_state_to_vc4_hdmi_conn_state(state); ++ ++ if (property == vc4_hdmi->broadcast_rgb_property) { ++ vc4_conn_state->broadcast_rgb = val; ++ return 0; ++ } ++ ++ DRM_DEBUG_ATOMIC("Unknown property [PROP:%d:%s]\n", ++ property->base.id, property->name); ++ return -EINVAL; ++} ++ + static void vc4_hdmi_connector_reset(struct drm_connector *connector) + { + struct vc4_hdmi_connector_state *old_state = +@@ -580,6 +652,7 @@ vc4_hdmi_connector_duplicate_state(struc + new_state->tmds_char_rate = vc4_state->tmds_char_rate; + new_state->output_bpc = vc4_state->output_bpc; + new_state->output_format = vc4_state->output_format; ++ new_state->broadcast_rgb = vc4_state->broadcast_rgb; + __drm_atomic_helper_connector_duplicate_state(connector, &new_state->base); + + return &new_state->base; +@@ -590,6 +663,8 @@ static const struct drm_connector_funcs + .reset = vc4_hdmi_connector_reset, + .atomic_duplicate_state = vc4_hdmi_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, ++ .atomic_get_property = vc4_hdmi_connector_get_property, ++ .atomic_set_property = vc4_hdmi_connector_set_property, + }; + + static const struct drm_connector_helper_funcs vc4_hdmi_connector_helper_funcs = { +@@ -598,6 +673,32 @@ static const struct drm_connector_helper + .atomic_check = vc4_hdmi_connector_atomic_check, + }; + ++static const struct drm_prop_enum_list broadcast_rgb_names[] = { ++ { VC4_BROADCAST_RGB_AUTO, "Automatic" }, ++ { VC4_BROADCAST_RGB_FULL, "Full" }, ++ { VC4_BROADCAST_RGB_LIMITED, "Limited 16:235" }, ++}; ++ ++static void ++vc4_hdmi_attach_broadcast_rgb_property(struct drm_device *dev, ++ struct vc4_hdmi *vc4_hdmi) ++{ ++ struct drm_property *prop = vc4_hdmi->broadcast_rgb_property; ++ ++ if (!prop) { ++ prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM, ++ "Broadcast RGB", ++ broadcast_rgb_names, ++ ARRAY_SIZE(broadcast_rgb_names)); ++ if (!prop) ++ return; ++ ++ vc4_hdmi->broadcast_rgb_property = prop; ++ } ++ ++ drm_object_attach_property(&vc4_hdmi->connector.base, prop, 0); ++} ++ + static int vc4_hdmi_connector_init(struct drm_device *dev, + struct vc4_hdmi *vc4_hdmi) + { +@@ -644,6 +745,8 @@ static int vc4_hdmi_connector_init(struc + if (vc4_hdmi->variant->supports_hdr) + drm_connector_attach_hdr_output_metadata_property(connector); + ++ vc4_hdmi_attach_broadcast_rgb_property(dev, vc4_hdmi); ++ + drm_connector_attach_encoder(connector, encoder); + + return 0; +@@ -1683,6 +1786,7 @@ static void vc4_hdmi_encoder_atomic_mode + mutex_lock(&vc4_hdmi->mutex); + drm_mode_copy(&vc4_hdmi->saved_adjusted_mode, + &crtc_state->adjusted_mode); ++ vc4_hdmi->broadcast_rgb = vc4_state->broadcast_rgb; + vc4_hdmi->output_bpc = vc4_state->output_bpc; + vc4_hdmi->output_format = vc4_state->output_format; + mutex_unlock(&vc4_hdmi->mutex); +--- a/drivers/gpu/drm/vc4/vc4_hdmi.h ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.h +@@ -129,6 +129,8 @@ struct vc4_hdmi { + + struct delayed_work scrambling_work; + ++ struct drm_property *broadcast_rgb_property; ++ + struct i2c_adapter *ddc; + void __iomem *hdmicore_regs; + void __iomem *hd_regs; +@@ -229,6 +231,12 @@ struct vc4_hdmi { + * for use outside of KMS hooks. Protected by @mutex. + */ + enum vc4_hdmi_output_format output_format; ++ ++ /** ++ * @broadcast_rgb: Copy of @vc4_connector_state.broadcast_rgb ++ * for use outside of KMS hooks. Protected by @mutex. ++ */ ++ int broadcast_rgb; + }; + + static inline struct vc4_hdmi * +@@ -249,6 +257,7 @@ struct vc4_hdmi_connector_state { + unsigned long long tmds_char_rate; + unsigned int output_bpc; + enum vc4_hdmi_output_format output_format; ++ int broadcast_rgb; + }; + + static inline struct vc4_hdmi_connector_state * +@@ -256,6 +265,12 @@ conn_state_to_vc4_hdmi_conn_state(struct + { + return container_of(conn_state, struct vc4_hdmi_connector_state, base); + } ++ ++static inline const struct vc4_hdmi_connector_state * ++const_conn_state_to_vc4_hdmi_conn_state(const struct drm_connector_state *conn_state) ++{ ++ return container_of(conn_state, struct vc4_hdmi_connector_state, base); ++} + + void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, + struct vc4_hdmi_connector_state *vc4_conn_state); diff --git a/target/linux/bcm27xx/patches-6.1/950-0023-drm-vc4-Add-DRM-210101010-RGB-formats-for-hvs5.patch b/target/linux/bcm27xx/patches-6.1/950-0023-drm-vc4-Add-DRM-210101010-RGB-formats-for-hvs5.patch new file mode 100644 index 0000000000..3d66af6e88 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0023-drm-vc4-Add-DRM-210101010-RGB-formats-for-hvs5.patch @@ -0,0 +1,51 @@ +From 496704e90c065015a808fc31356c7aecc5bfeccd Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 31 Jan 2022 16:28:43 +0000 +Subject: [PATCH] drm/vc4: Add DRM 210101010 RGB formats for hvs5. + +HVS5 supports the 210101010 RGB[A|X] formats, but they were +missing from the DRM to HVS mapping list, so weren't available. +Add them in. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_plane.c | 28 ++++++++++++++++++++++++++++ + 1 file changed, 28 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -139,6 +139,34 @@ static const struct hvs_format { + .pixel_order = HVS_PIXEL_ORDER_XYCBCR, + .hvs5_only = true, + }, ++ { ++ .drm = DRM_FORMAT_XRGB2101010, ++ .hvs = HVS_PIXEL_FORMAT_RGBA1010102, ++ .pixel_order = HVS_PIXEL_ORDER_ABGR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ARGB, ++ .hvs5_only = true, ++ }, ++ { ++ .drm = DRM_FORMAT_ARGB2101010, ++ .hvs = HVS_PIXEL_FORMAT_RGBA1010102, ++ .pixel_order = HVS_PIXEL_ORDER_ABGR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ARGB, ++ .hvs5_only = true, ++ }, ++ { ++ .drm = DRM_FORMAT_ABGR2101010, ++ .hvs = HVS_PIXEL_FORMAT_RGBA1010102, ++ .pixel_order = HVS_PIXEL_ORDER_ARGB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ABGR, ++ .hvs5_only = true, ++ }, ++ { ++ .drm = DRM_FORMAT_XBGR2101010, ++ .hvs = HVS_PIXEL_FORMAT_RGBA1010102, ++ .pixel_order = HVS_PIXEL_ORDER_ARGB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ABGR, ++ .hvs5_only = true, ++ }, + }; + + static const struct hvs_format *vc4_get_hvs_format(u32 drm_format) diff --git a/target/linux/bcm27xx/patches-6.1/950-0024-drm-vc4-dpi-Support-DPI-interface-in-mode3-for-RGB56.patch b/target/linux/bcm27xx/patches-6.1/950-0024-drm-vc4-dpi-Support-DPI-interface-in-mode3-for-RGB56.patch new file mode 100644 index 0000000000..2142cf58ce --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0024-drm-vc4-dpi-Support-DPI-interface-in-mode3-for-RGB56.patch @@ -0,0 +1,31 @@ +From 1c22021723d142524d744f6e2a6d81fc39b1b366 Mon Sep 17 00:00:00 2001 +From: Chris Morgan +Date: Fri, 28 Jan 2022 17:39:54 -0600 +Subject: [PATCH] drm/vc4: dpi: Support DPI interface in mode3 for + RGB565 + +Add support for the VC4 DPI driver to utilize DPI mode 3. This is +defined here as xxxRRRRRxxGGGGGGxxxBBBBB: +https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#parallel-display-interface-dpi + +This mode is required to use the Geekworm MZP280 DPI display. + +Signed-off-by: Chris Morgan +Reviewed-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_dpi.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_dpi.c ++++ b/drivers/gpu/drm/vc4/vc4_dpi.c +@@ -188,6 +188,10 @@ static void vc4_dpi_encoder_enable(struc + dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_1, + DPI_FORMAT); + break; ++ case MEDIA_BUS_FMT_RGB565_1X24_CPADHI: ++ dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_2, ++ DPI_FORMAT); ++ break; + default: + DRM_ERROR("Unknown media bus format %d\n", + bus_format); diff --git a/target/linux/bcm27xx/patches-6.1/950-0025-drm-panel-Add-and-initialise-an-orientation-field-to.patch b/target/linux/bcm27xx/patches-6.1/950-0025-drm-panel-Add-and-initialise-an-orientation-field-to.patch new file mode 100644 index 0000000000..9cdbe6d7c8 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0025-drm-panel-Add-and-initialise-an-orientation-field-to.patch @@ -0,0 +1,89 @@ +From 49d74639d19ec3ae9810a1d6ae6c0ff725c75881 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 1 Feb 2022 12:20:20 +0000 +Subject: [PATCH] drm/panel: Add and initialise an orientation field to + drm_panel + +Current usage of drm_connector_set_panel_orientation is from a panel's +get_modes call. However if the panel orientation property doesn't +exist on the connector at this point, then drm_mode_object triggers +WARNs as the connector is already registered. + +Add an orientation variable to struct drm_panel and initialise it from +drm_panel_init. +panel_bridge_attach can then create the property before the connector +is registered. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/bridge/panel.c | 4 ++++ + drivers/gpu/drm/drm_panel.c | 15 ++++++++++----- + include/drm/drm_panel.h | 8 ++++++++ + 3 files changed, 22 insertions(+), 5 deletions(-) + +--- a/drivers/gpu/drm/bridge/panel.c ++++ b/drivers/gpu/drm/bridge/panel.c +@@ -81,6 +81,10 @@ static int panel_bridge_attach(struct dr + return ret; + } + ++ /* set up connector's "panel orientation" property */ ++ drm_connector_set_panel_orientation(&panel_bridge->connector, ++ panel_bridge->panel->orientation); ++ + drm_connector_attach_encoder(&panel_bridge->connector, + bridge->encoder); + +--- a/drivers/gpu/drm/drm_panel.c ++++ b/drivers/gpu/drm/drm_panel.c +@@ -61,6 +61,9 @@ void drm_panel_init(struct drm_panel *pa + panel->dev = dev; + panel->funcs = funcs; + panel->connector_type = connector_type; ++ ++ panel->orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN; ++ of_drm_get_panel_orientation(dev->of_node, &panel->orientation); + } + EXPORT_SYMBOL(drm_panel_init); + +@@ -289,16 +292,18 @@ int of_drm_get_panel_orientation(const s + if (ret < 0) + return ret; + +- if (rotation == 0) ++ if (rotation == 0) { + *orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL; +- else if (rotation == 90) ++ } else if (rotation == 90) { + *orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP; +- else if (rotation == 180) ++ } else if (rotation == 180) { + *orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP; +- else if (rotation == 270) ++ } else if (rotation == 270) { + *orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP; +- else ++ } else { ++ DRM_ERROR("%pOF: invalid orientation %d\n", np, ret); + return -EINVAL; ++ } + + return 0; + } +--- a/include/drm/drm_panel.h ++++ b/include/drm/drm_panel.h +@@ -183,6 +183,14 @@ struct drm_panel { + int connector_type; + + /** ++ * @orientation: ++ * ++ * Panel orientation at initialisation. This is used to initialise the ++ * drm_connector property for panel orientation. ++ */ ++ enum drm_panel_orientation orientation; ++ ++ /** + * @list: + * + * Panel entry in registry. diff --git a/target/linux/bcm27xx/patches-6.1/950-0026-drm-dsi-Document-the-meaning-and-spec-references-for.patch b/target/linux/bcm27xx/patches-6.1/950-0026-drm-dsi-Document-the-meaning-and-spec-references-for.patch new file mode 100644 index 0000000000..a26f56e03e --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0026-drm-dsi-Document-the-meaning-and-spec-references-for.patch @@ -0,0 +1,76 @@ +From b99fa92c1ff228cf2d6c6ee02cdc2650fe7bfef1 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 17 Dec 2021 13:36:52 +0000 +Subject: [PATCH] drm/dsi: Document the meaning and spec references for + MIPI_DSI_MODE_* + +The MIPI_DSI_MODE_* flags have fairly terse descriptions and no reference +to the DSI specification as to their exact meaning. Usage has therefore +been rather fluid. + +Extend the descriptions and provide references to the part of the +MIPI DSI specification regarding what they mean. + +Signed-off-by: Dave Stevenson +--- + include/drm/drm_mipi_dsi.h | 38 ++++++++++++++++++++++++++------------ + 1 file changed, 26 insertions(+), 12 deletions(-) + +--- a/include/drm/drm_mipi_dsi.h ++++ b/include/drm/drm_mipi_dsi.h +@@ -113,29 +113,43 @@ struct mipi_dsi_host *of_find_mipi_dsi_h + + /* DSI mode flags */ + +-/* video mode */ ++/* Video mode display. ++ * Not set denotes a command mode display. ++ */ + #define MIPI_DSI_MODE_VIDEO BIT(0) +-/* video burst mode */ ++/* Video burst mode. ++ * Link frequency to be configured via platform configuration. ++ * This should always be set in conjunction with MIPI_DSI_MODE_VIDEO. ++ * (DSI spec V1.1 8.11.4) ++ */ + #define MIPI_DSI_MODE_VIDEO_BURST BIT(1) +-/* video pulse mode */ ++/* Video pulse mode. ++ * Not set denotes sync event mode. (DSI spec V1.1 8.11.2) ++ */ + #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) +-/* enable auto vertical count mode */ ++/* Enable auto vertical count mode */ + #define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) +-/* enable hsync-end packets in vsync-pulse and v-porch area */ ++/* Enable hsync-end packets in vsync-pulse and v-porch area */ + #define MIPI_DSI_MODE_VIDEO_HSE BIT(4) +-/* disable hfront-porch area */ ++/* Transmit NULL packets or LP mode during hfront-porch area. ++ * Not set denotes sending a blanking packet instead. (DSI spec V1.1 8.11.1) ++ */ + #define MIPI_DSI_MODE_VIDEO_NO_HFP BIT(5) +-/* disable hback-porch area */ ++/* Transmit NULL packets or LP mode during hback-porch area. ++ * Not set denotes sending a blanking packet instead. (DSI spec V1.1 8.11.1) ++ */ + #define MIPI_DSI_MODE_VIDEO_NO_HBP BIT(6) +-/* disable hsync-active area */ ++/* Transmit NULL packets or LP mode during hsync-active area. ++ * Not set denotes sending a blanking packet instead. (DSI spec V1.1 8.11.1) ++ */ + #define MIPI_DSI_MODE_VIDEO_NO_HSA BIT(7) +-/* flush display FIFO on vsync pulse */ ++/* Flush display FIFO on vsync pulse */ + #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) +-/* disable EoT packets in HS mode */ ++/* Disable EoT packets in HS mode. (DSI spec V1.1 8.1) */ + #define MIPI_DSI_MODE_NO_EOT_PACKET BIT(9) +-/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ ++/* Device supports non-continuous clock behavior (DSI spec V1.1 5.6.1) */ + #define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) +-/* transmit data in low power */ ++/* Transmit data in low power */ + #define MIPI_DSI_MODE_LPM BIT(11) + /* transmit data ending at the same time for all lanes within one hsync */ + #define MIPI_DSI_HS_PKT_END_ALIGNED BIT(12) diff --git a/target/linux/bcm27xx/patches-6.1/950-0027-drm-bridge-tc358762-Ignore-EPROBE_DEFER-when-logging.patch b/target/linux/bcm27xx/patches-6.1/950-0027-drm-bridge-tc358762-Ignore-EPROBE_DEFER-when-logging.patch new file mode 100644 index 0000000000..ce9bab645a --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0027-drm-bridge-tc358762-Ignore-EPROBE_DEFER-when-logging.patch @@ -0,0 +1,25 @@ +From 135340b06a02d3a5ad0b214b3c0d59f6adb79dba Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 20 Jan 2022 17:29:36 +0000 +Subject: [PATCH] drm/bridge: tc358762: Ignore EPROBE_DEFER when + logging errors + +mipi_dsi_attach can fail due to resources not being available +yet, therefore do not log error messages should they occur. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/bridge/tc358762.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/gpu/drm/bridge/tc358762.c ++++ b/drivers/gpu/drm/bridge/tc358762.c +@@ -235,7 +235,7 @@ static int tc358762_probe(struct mipi_ds + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + drm_bridge_remove(&ctx->bridge); +- dev_err(dev, "failed to attach dsi\n"); ++ dev_err_probe(dev, ret, "failed to attach dsi\n"); + } + + return ret; diff --git a/target/linux/bcm27xx/patches-6.1/950-0028-drm-vc4-Rename-bridge-to-out_bridge.patch b/target/linux/bcm27xx/patches-6.1/950-0028-drm-vc4-Rename-bridge-to-out_bridge.patch new file mode 100644 index 0000000000..1ebf4efd51 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0028-drm-vc4-Rename-bridge-to-out_bridge.patch @@ -0,0 +1,56 @@ +From ed34c4192a6189ef27ea4a1958ea843906afbe4d Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 30 Sep 2021 17:51:16 +0100 +Subject: [PATCH] drm/vc4: Rename bridge to out_bridge + +In preparation for converting the encoder to being a bridge, +rename the variable holding the next bridge in the chain to +out_bridge, so that our bridge can be called bridge. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_dsi.c | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_dsi.c ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -556,7 +556,7 @@ struct vc4_dsi { + + struct platform_device *pdev; + +- struct drm_bridge *bridge; ++ struct drm_bridge *out_bridge; + struct list_head bridge_chain; + + void __iomem *regs; +@@ -800,7 +800,7 @@ static void vc4_dsi_encoder_disable(stru + if (iter->funcs->disable) + iter->funcs->disable(iter); + +- if (iter == dsi->bridge) ++ if (iter == dsi->out_bridge) + break; + } + +@@ -1723,9 +1723,9 @@ static int vc4_dsi_bind(struct device *d + return ret; + } + +- dsi->bridge = drmm_of_get_bridge(drm, dev->of_node, 0, 0); +- if (IS_ERR(dsi->bridge)) +- return PTR_ERR(dsi->bridge); ++ dsi->out_bridge = drmm_of_get_bridge(drm, dev->of_node, 0, 0); ++ if (IS_ERR(dsi->out_bridge)) ++ return PTR_ERR(dsi->out_bridge); + + /* The esc clock rate is supposed to always be 100Mhz. */ + ret = clk_set_rate(dsi->escape_clock, 100 * 1000000); +@@ -1751,7 +1751,7 @@ static int vc4_dsi_bind(struct device *d + if (ret) + return ret; + +- ret = drm_bridge_attach(encoder, dsi->bridge, NULL, 0); ++ ret = drm_bridge_attach(encoder, dsi->out_bridge, NULL, 0); + if (ret) + return ret; + /* Disable the atomic helper calls into the bridge. We diff --git a/target/linux/bcm27xx/patches-6.1/950-0029-drm-vc4-Move-DSI-initialisation-to-encoder_mode_set.patch b/target/linux/bcm27xx/patches-6.1/950-0029-drm-vc4-Move-DSI-initialisation-to-encoder_mode_set.patch new file mode 100644 index 0000000000..9803df95d1 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0029-drm-vc4-Move-DSI-initialisation-to-encoder_mode_set.patch @@ -0,0 +1,64 @@ +From 5590c79c417064363236f24ffe40d87d6cfd128e Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 7 Feb 2022 17:14:51 +0000 +Subject: [PATCH] drm/vc4: Move DSI initialisation to encoder_mode_set. + +Breaking the bridge chain does not work for atomic bridges/panels +and generally causes issues. +We need to initialise the DSI host before the bridge pre_enables +are called, so move that to encoder_mode_set in the same way that +dw-mipi-dsi does. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_dsi.c | 17 +++++++++++++---- + 1 file changed, 13 insertions(+), 4 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_dsi.c ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -867,18 +867,18 @@ static bool vc4_dsi_encoder_mode_fixup(s + return true; + } + +-static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) ++static void vc4_dsi_encoder_mode_set(struct drm_encoder *encoder, ++ struct drm_display_mode *mode, ++ struct drm_display_mode *adjusted_mode) + { +- struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; + struct vc4_dsi *dsi = to_vc4_dsi(encoder); + struct device *dev = &dsi->pdev->dev; + bool debug_dump_regs = false; +- struct drm_bridge *iter; + unsigned long hs_clock; + u32 ui_ns; + /* Minimum LP state duration in escape clock cycles. */ + u32 lpx = dsi_esc_timing(60); +- unsigned long pixel_clock_hz = mode->clock * 1000; ++ unsigned long pixel_clock_hz = adjusted_mode->clock * 1000; + unsigned long dsip_clock; + unsigned long phy_clock; + int ret; +@@ -1105,6 +1105,14 @@ static void vc4_dsi_encoder_enable(struc + ~DSI_PORT_BIT(PHY_AFEC0_RESET)); + + vc4_dsi_ulps(dsi, false); ++} ++ ++static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) ++{ ++ struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); ++ struct vc4_dsi *dsi = vc4_encoder->dsi; ++ bool debug_dump_regs = false; ++ struct drm_bridge *iter; + + list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) { + if (iter->funcs->pre_enable) +@@ -1370,6 +1378,7 @@ static const struct drm_encoder_helper_f + .disable = vc4_dsi_encoder_disable, + .enable = vc4_dsi_encoder_enable, + .mode_fixup = vc4_dsi_encoder_mode_fixup, ++ .mode_set = vc4_dsi_encoder_mode_set, + }; + + static int vc4_dsi_late_register(struct drm_encoder *encoder) diff --git a/target/linux/bcm27xx/patches-6.1/950-0030-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch b/target/linux/bcm27xx/patches-6.1/950-0030-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch new file mode 100644 index 0000000000..7718e3be81 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0030-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch @@ -0,0 +1,118 @@ +From bd58cbe5c5155279ccd85c29ddef53094cf6dc81 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 15 Dec 2021 17:44:49 +0000 +Subject: [PATCH] drm/vc4: Remove splitting the bridge chain from the + driver. + +Splitting the bridge chain fails for atomic bridges as the +framework can't add the relevant state in +drm_atomic_add_encoder_bridges. +The chain was split because we needed to power up before +calling pre_enable, but that is now done in mode_set, and will +move into the framework. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_dsi.c | 47 ----------------------------------- + 1 file changed, 47 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_dsi.c ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -557,7 +557,6 @@ struct vc4_dsi { + struct platform_device *pdev; + + struct drm_bridge *out_bridge; +- struct list_head bridge_chain; + + void __iomem *regs; + +@@ -794,23 +793,9 @@ static void vc4_dsi_encoder_disable(stru + { + struct vc4_dsi *dsi = to_vc4_dsi(encoder); + struct device *dev = &dsi->pdev->dev; +- struct drm_bridge *iter; +- +- list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) { +- if (iter->funcs->disable) +- iter->funcs->disable(iter); +- +- if (iter == dsi->out_bridge) +- break; +- } + + vc4_dsi_ulps(dsi, true); + +- list_for_each_entry_from(iter, &dsi->bridge_chain, chain_node) { +- if (iter->funcs->post_disable) +- iter->funcs->post_disable(iter); +- } +- + clk_disable_unprepare(dsi->pll_phy_clock); + clk_disable_unprepare(dsi->escape_clock); + clk_disable_unprepare(dsi->pixel_clock); +@@ -1112,12 +1097,6 @@ static void vc4_dsi_encoder_enable(struc + struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); + struct vc4_dsi *dsi = vc4_encoder->dsi; + bool debug_dump_regs = false; +- struct drm_bridge *iter; +- +- list_for_each_entry_reverse(iter, &dsi->bridge_chain, chain_node) { +- if (iter->funcs->pre_enable) +- iter->funcs->pre_enable(iter); +- } + + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { + DSI_PORT_WRITE(DISP0_CTRL, +@@ -1134,11 +1113,6 @@ static void vc4_dsi_encoder_enable(struc + DSI_DISP0_ENABLE); + } + +- list_for_each_entry(iter, &dsi->bridge_chain, chain_node) { +- if (iter->funcs->enable) +- iter->funcs->enable(iter); +- } +- + if (debug_dump_regs) { + struct drm_printer p = drm_info_printer(&dsi->pdev->dev); + dev_info(&dsi->pdev->dev, "DSI regs after:\n"); +@@ -1626,7 +1600,6 @@ static int vc4_dsi_bind(struct device *d + + dsi->variant = of_device_get_match_data(dev); + +- INIT_LIST_HEAD(&dsi->bridge_chain); + dsi->encoder.type = dsi->variant->port ? + VC4_ENCODER_TYPE_DSI1 : VC4_ENCODER_TYPE_DSI0; + +@@ -1763,32 +1736,12 @@ static int vc4_dsi_bind(struct device *d + ret = drm_bridge_attach(encoder, dsi->out_bridge, NULL, 0); + if (ret) + return ret; +- /* Disable the atomic helper calls into the bridge. We +- * manually call the bridge pre_enable / enable / etc. calls +- * from our driver, since we need to sequence them within the +- * encoder's enable/disable paths. +- */ +- list_splice_init(&encoder->bridge_chain, &dsi->bridge_chain); + + return 0; + } + +-static void vc4_dsi_unbind(struct device *dev, struct device *master, +- void *data) +-{ +- struct vc4_dsi *dsi = dev_get_drvdata(dev); +- struct drm_encoder *encoder = &dsi->encoder.base; +- +- /* +- * Restore the bridge_chain so the bridge detach procedure can happen +- * normally. +- */ +- list_splice_init(&dsi->bridge_chain, &encoder->bridge_chain); +-} +- + static const struct component_ops vc4_dsi_ops = { + .bind = vc4_dsi_bind, +- .unbind = vc4_dsi_unbind, + }; + + static int vc4_dsi_dev_probe(struct platform_device *pdev) diff --git a/target/linux/bcm27xx/patches-6.1/950-0031-drm-vc4-Convert-vc4_dsi-to-use-atomic-enable-disable.patch b/target/linux/bcm27xx/patches-6.1/950-0031-drm-vc4-Convert-vc4_dsi-to-use-atomic-enable-disable.patch new file mode 100644 index 0000000000..2554944748 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0031-drm-vc4-Convert-vc4_dsi-to-use-atomic-enable-disable.patch @@ -0,0 +1,84 @@ +From ab6f22f1747903266a88b73f628eb4f89474c84c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 15 Dec 2021 17:47:14 +0000 +Subject: [PATCH] drm/vc4: Convert vc4_dsi to use atomic + enable/disable/mode_set. + +The atomic calls are preferred as the non-atomic ones +are deprecated. In preparation for conversion to a bridge, +switch to the atomic calls. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_dsi.c | 23 +++++++++++++++-------- + 1 file changed, 15 insertions(+), 8 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_dsi.c ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -789,7 +789,8 @@ dsi_esc_timing(u32 ns) + return DIV_ROUND_UP(ns, ESC_TIME_NS); + } + +-static void vc4_dsi_encoder_disable(struct drm_encoder *encoder) ++static void vc4_dsi_encoder_disable(struct drm_encoder *encoder, ++ struct drm_atomic_state *state) + { + struct vc4_dsi *dsi = to_vc4_dsi(encoder); + struct device *dev = &dsi->pdev->dev; +@@ -853,17 +854,18 @@ static bool vc4_dsi_encoder_mode_fixup(s + } + + static void vc4_dsi_encoder_mode_set(struct drm_encoder *encoder, +- struct drm_display_mode *mode, +- struct drm_display_mode *adjusted_mode) ++ struct drm_crtc_state *crtc_state, ++ struct drm_connector_state *conn_state) + { + struct vc4_dsi *dsi = to_vc4_dsi(encoder); + struct device *dev = &dsi->pdev->dev; ++ const struct drm_display_mode *mode; + bool debug_dump_regs = false; + unsigned long hs_clock; + u32 ui_ns; + /* Minimum LP state duration in escape clock cycles. */ + u32 lpx = dsi_esc_timing(60); +- unsigned long pixel_clock_hz = adjusted_mode->clock * 1000; ++ unsigned long pixel_clock_hz; + unsigned long dsip_clock; + unsigned long phy_clock; + int ret; +@@ -880,6 +882,10 @@ static void vc4_dsi_encoder_mode_set(str + drm_print_regset32(&p, &dsi->regset); + } + ++ mode = &crtc_state->adjusted_mode; ++ ++ pixel_clock_hz = mode->clock * 1000; ++ + /* Round up the clk_set_rate() request slightly, since + * PLLD_DSI1 is an integer divider and its rate selection will + * never round up. +@@ -1092,7 +1098,8 @@ static void vc4_dsi_encoder_mode_set(str + vc4_dsi_ulps(dsi, false); + } + +-static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) ++static void vc4_dsi_encoder_enable(struct drm_encoder *encoder, ++ struct drm_atomic_state *state) + { + struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); + struct vc4_dsi *dsi = vc4_encoder->dsi; +@@ -1349,10 +1356,10 @@ static const struct mipi_dsi_host_ops vc + }; + + static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = { +- .disable = vc4_dsi_encoder_disable, +- .enable = vc4_dsi_encoder_enable, ++ .atomic_disable = vc4_dsi_encoder_disable, ++ .atomic_enable = vc4_dsi_encoder_enable, + .mode_fixup = vc4_dsi_encoder_mode_fixup, +- .mode_set = vc4_dsi_encoder_mode_set, ++ .atomic_mode_set = vc4_dsi_encoder_mode_set, + }; + + static int vc4_dsi_late_register(struct drm_encoder *encoder) diff --git a/target/linux/bcm27xx/patches-6.1/950-0032-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch b/target/linux/bcm27xx/patches-6.1/950-0032-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch new file mode 100644 index 0000000000..480a600e63 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0032-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch @@ -0,0 +1,266 @@ +From c0611a36761fb6abf5a806bbfe417db1f4464a56 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 15 Dec 2021 17:57:45 +0000 +Subject: [PATCH] drm/vc4: Convert vc4_dsi to using a bridge instead of + encoder. + +Remove the encoder functions, and create a bridge attached to +this dumb encoder which implements the same functionality. + +As a bridge has state which an encoder doesn't, we need to +add the state management functions as well. + +As there is no bridge atomic_mode_set, move the initialisation +code that was in mode_set into _pre_enable. +The code to actually enable and disable sending video are split +from the general control into _enable and _disable. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_dsi.c | 122 +++++++++++++++++++++++++--------- + 1 file changed, 90 insertions(+), 32 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_dsi.c ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -557,6 +557,7 @@ struct vc4_dsi { + struct platform_device *pdev; + + struct drm_bridge *out_bridge; ++ struct drm_bridge bridge; + + void __iomem *regs; + +@@ -608,6 +609,12 @@ to_vc4_dsi(struct drm_encoder *encoder) + return container_of(encoder, struct vc4_dsi, encoder.base); + } + ++static inline struct vc4_dsi * ++bridge_to_vc4_dsi(struct drm_bridge *bridge) ++{ ++ return container_of(bridge, struct vc4_dsi, bridge); ++} ++ + static inline void + dsi_dma_workaround_write(struct vc4_dsi *dsi, u32 offset, u32 val) + { +@@ -789,10 +796,21 @@ dsi_esc_timing(u32 ns) + return DIV_ROUND_UP(ns, ESC_TIME_NS); + } + +-static void vc4_dsi_encoder_disable(struct drm_encoder *encoder, +- struct drm_atomic_state *state) ++static void vc4_dsi_bridge_disable(struct drm_bridge *bridge, ++ struct drm_bridge_state *state) + { +- struct vc4_dsi *dsi = to_vc4_dsi(encoder); ++ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge); ++ u32 disp0_ctrl; ++ ++ disp0_ctrl = DSI_PORT_READ(DISP0_CTRL); ++ disp0_ctrl &= ~DSI_DISP0_ENABLE; ++ DSI_PORT_WRITE(DISP0_CTRL, disp0_ctrl); ++} ++ ++static void vc4_dsi_bridge_post_disable(struct drm_bridge *bridge, ++ struct drm_bridge_state *state) ++{ ++ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge); + struct device *dev = &dsi->pdev->dev; + + vc4_dsi_ulps(dsi, true); +@@ -817,11 +835,11 @@ static void vc4_dsi_encoder_disable(stru + * higher-than-expected clock rate to the panel, but that's what the + * firmware does too. + */ +-static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder, +- const struct drm_display_mode *mode, +- struct drm_display_mode *adjusted_mode) ++static bool vc4_dsi_bridge_mode_fixup(struct drm_bridge *bridge, ++ const struct drm_display_mode *mode, ++ struct drm_display_mode *adjusted_mode) + { +- struct vc4_dsi *dsi = to_vc4_dsi(encoder); ++ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge); + struct clk *phy_parent = clk_get_parent(dsi->pll_phy_clock); + unsigned long parent_rate = clk_get_rate(phy_parent); + unsigned long pixel_clock_hz = mode->clock * 1000; +@@ -853,15 +871,18 @@ static bool vc4_dsi_encoder_mode_fixup(s + return true; + } + +-static void vc4_dsi_encoder_mode_set(struct drm_encoder *encoder, +- struct drm_crtc_state *crtc_state, +- struct drm_connector_state *conn_state) ++static void vc4_dsi_bridge_pre_enable(struct drm_bridge *bridge, ++ struct drm_bridge_state *old_state) + { +- struct vc4_dsi *dsi = to_vc4_dsi(encoder); ++ struct drm_atomic_state *state = old_state->base.state; ++ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge); ++ const struct drm_crtc_state *crtc_state; + struct device *dev = &dsi->pdev->dev; + const struct drm_display_mode *mode; ++ struct drm_connector *connector; + bool debug_dump_regs = false; + unsigned long hs_clock; ++ struct drm_crtc *crtc; + u32 ui_ns; + /* Minimum LP state duration in escape clock cycles. */ + u32 lpx = dsi_esc_timing(60); +@@ -882,6 +903,14 @@ static void vc4_dsi_encoder_mode_set(str + drm_print_regset32(&p, &dsi->regset); + } + ++ /* ++ * Retrieve the CRTC adjusted mode. This requires a little dance to go ++ * from the bridge to the encoder, to the connector and to the CRTC. ++ */ ++ connector = drm_atomic_get_new_connector_for_encoder(state, ++ bridge->encoder); ++ crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; ++ crtc_state = drm_atomic_get_new_crtc_state(state, crtc); + mode = &crtc_state->adjusted_mode; + + pixel_clock_hz = mode->clock * 1000; +@@ -1096,14 +1125,6 @@ static void vc4_dsi_encoder_mode_set(str + ~DSI_PORT_BIT(PHY_AFEC0_RESET)); + + vc4_dsi_ulps(dsi, false); +-} +- +-static void vc4_dsi_encoder_enable(struct drm_encoder *encoder, +- struct drm_atomic_state *state) +-{ +- struct vc4_dsi_encoder *vc4_encoder = to_vc4_dsi_encoder(encoder); +- struct vc4_dsi *dsi = vc4_encoder->dsi; +- bool debug_dump_regs = false; + + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { + DSI_PORT_WRITE(DISP0_CTRL, +@@ -1112,13 +1133,23 @@ static void vc4_dsi_encoder_enable(struc + VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) | + VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME, + DSI_DISP0_LP_STOP_CTRL) | +- DSI_DISP0_ST_END | +- DSI_DISP0_ENABLE); ++ DSI_DISP0_ST_END); + } else { + DSI_PORT_WRITE(DISP0_CTRL, +- DSI_DISP0_COMMAND_MODE | +- DSI_DISP0_ENABLE); ++ DSI_DISP0_COMMAND_MODE); + } ++} ++ ++static void vc4_dsi_bridge_enable(struct drm_bridge *bridge, ++ struct drm_bridge_state *old_state) ++{ ++ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge); ++ bool debug_dump_regs = false; ++ u32 disp0_ctrl; ++ ++ disp0_ctrl = DSI_PORT_READ(DISP0_CTRL); ++ disp0_ctrl |= DSI_DISP0_ENABLE; ++ DSI_PORT_WRITE(DISP0_CTRL, disp0_ctrl); + + if (debug_dump_regs) { + struct drm_printer p = drm_info_printer(&dsi->pdev->dev); +@@ -1127,6 +1158,16 @@ static void vc4_dsi_encoder_enable(struc + } + } + ++static int vc4_dsi_bridge_attach(struct drm_bridge *bridge, ++ enum drm_bridge_attach_flags flags) ++{ ++ struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge); ++ ++ /* Attach the panel or bridge to the dsi bridge */ ++ return drm_bridge_attach(bridge->encoder, dsi->out_bridge, ++ &dsi->bridge, flags); ++} ++ + static ssize_t vc4_dsi_host_transfer(struct mipi_dsi_host *host, + const struct mipi_dsi_msg *msg) + { +@@ -1303,6 +1344,7 @@ static int vc4_dsi_host_attach(struct mi + struct mipi_dsi_device *device) + { + struct vc4_dsi *dsi = host_to_dsi(host); ++ int ret; + + dsi->lanes = device->lanes; + dsi->channel = device->channel; +@@ -1337,7 +1379,15 @@ static int vc4_dsi_host_attach(struct mi + return 0; + } + +- return component_add(&dsi->pdev->dev, &vc4_dsi_ops); ++ drm_bridge_add(&dsi->bridge); ++ ++ ret = component_add(&dsi->pdev->dev, &vc4_dsi_ops); ++ if (ret) { ++ drm_bridge_remove(&dsi->bridge); ++ return ret; ++ } ++ ++ return 0; + } + + static int vc4_dsi_host_detach(struct mipi_dsi_host *host, +@@ -1346,6 +1396,7 @@ static int vc4_dsi_host_detach(struct mi + struct vc4_dsi *dsi = host_to_dsi(host); + + component_del(&dsi->pdev->dev, &vc4_dsi_ops); ++ drm_bridge_remove(&dsi->bridge); + return 0; + } + +@@ -1355,11 +1406,16 @@ static const struct mipi_dsi_host_ops vc + .transfer = vc4_dsi_host_transfer, + }; + +-static const struct drm_encoder_helper_funcs vc4_dsi_encoder_helper_funcs = { +- .atomic_disable = vc4_dsi_encoder_disable, +- .atomic_enable = vc4_dsi_encoder_enable, +- .mode_fixup = vc4_dsi_encoder_mode_fixup, +- .atomic_mode_set = vc4_dsi_encoder_mode_set, ++static const struct drm_bridge_funcs vc4_dsi_bridge_funcs = { ++ .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, ++ .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, ++ .atomic_reset = drm_atomic_helper_bridge_reset, ++ .atomic_pre_enable = vc4_dsi_bridge_pre_enable, ++ .atomic_enable = vc4_dsi_bridge_enable, ++ .atomic_disable = vc4_dsi_bridge_disable, ++ .atomic_post_disable = vc4_dsi_bridge_post_disable, ++ .attach = vc4_dsi_bridge_attach, ++ .mode_fixup = vc4_dsi_bridge_mode_fixup, + }; + + static int vc4_dsi_late_register(struct drm_encoder *encoder) +@@ -1734,13 +1790,11 @@ static int vc4_dsi_bind(struct device *d + if (ret) + return ret; + +- drm_encoder_helper_add(encoder, &vc4_dsi_encoder_helper_funcs); +- + ret = devm_pm_runtime_enable(dev); + if (ret) + return ret; + +- ret = drm_bridge_attach(encoder, dsi->out_bridge, NULL, 0); ++ ret = drm_bridge_attach(encoder, &dsi->bridge, NULL, 0); + if (ret) + return ret; + +@@ -1762,7 +1816,11 @@ static int vc4_dsi_dev_probe(struct plat + dev_set_drvdata(dev, dsi); + + kref_init(&dsi->kref); ++ + dsi->pdev = pdev; ++ dsi->bridge.funcs = &vc4_dsi_bridge_funcs; ++ dsi->bridge.of_node = dev->of_node; ++ dsi->bridge.type = DRM_MODE_CONNECTOR_DSI; + dsi->dsi_host.ops = &vc4_dsi_host_ops; + dsi->dsi_host.dev = dev; + mipi_dsi_host_register(&dsi->dsi_host); diff --git a/target/linux/bcm27xx/patches-6.1/950-0033-drm-vc4-Remove-entry-to-ULPS-from-vc4_dsi-post_disab.patch b/target/linux/bcm27xx/patches-6.1/950-0033-drm-vc4-Remove-entry-to-ULPS-from-vc4_dsi-post_disab.patch new file mode 100644 index 0000000000..e9aefd181b --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0033-drm-vc4-Remove-entry-to-ULPS-from-vc4_dsi-post_disab.patch @@ -0,0 +1,32 @@ +From b0b5ae1ea6701cf9395f3132d559a5379a4fb73e Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 11 Feb 2022 14:15:26 +0000 +Subject: [PATCH] drm/vc4: Remove entry to ULPS from vc4_dsi + post_disable + +Post_disable was sending the D-PHY sequence to put any device +into ULPS suspend mode, and then cutting power to the DSI block. +The power-on reset state of the DSI block is for DSI to be in +an operational state, not ULPS, so it then never sent the sequence +for exiting ULPS. Any attached device that didn't have an external +reset therefore remained in ULPS / standby, and didn't function. + +Use of ULPS isn't well specified in DRM, therefore remove entering +it to avoid the above situation. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_dsi.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_dsi.c ++++ b/drivers/gpu/drm/vc4/vc4_dsi.c +@@ -813,8 +813,6 @@ static void vc4_dsi_bridge_post_disable( + struct vc4_dsi *dsi = bridge_to_vc4_dsi(bridge); + struct device *dev = &dsi->pdev->dev; + +- vc4_dsi_ulps(dsi, true); +- + clk_disable_unprepare(dsi->pll_phy_clock); + clk_disable_unprepare(dsi->escape_clock); + clk_disable_unprepare(dsi->pixel_clock); diff --git a/target/linux/bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch b/target/linux/bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch new file mode 100644 index 0000000000..bab4ed9b90 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0034-drm-bridge-Introduce-pre_enable_upstream_first-to-al.patch @@ -0,0 +1,308 @@ +From 5365030a003a6cb0c336202256341e4bc9d65d52 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 16 Dec 2021 15:25:35 +0000 +Subject: [PATCH] drm/bridge: Introduce pre_enable_upstream_first to + alter bridge init order + +DSI sink devices typically want the DSI host powered up and configured +before they are powered up. pre_enable is the place this would normally +happen, but they are called in reverse order from panel/connector towards +the encoder, which is the "wrong" order. + +Add a new flag pre_enable_upstream_first that any bridge can set +to swap the order of pre_enable (and post_disable) for that and the +immediately upstream bridge. +Should the immediately upstream bridge also set the +pre_enable_upstream_first flag, the bridge upstream of that will be called +before either of those which requested pre_enable_upstream_first. + +eg: +- Panel +- Bridge 1 +- Bridge 2 pre_enable_upstream_first +- Bridge 3 +- Bridge 4 pre_enable_upstream_first +- Bridge 5 pre_enable_upstream_first +- Bridge 6 +- Encoder +Would result in pre_enable's being called as Panel, Bridge 1, Bridge 3, +Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/drm_bridge.c | 177 +++++++++++++++++++++++++---------- + include/drm/drm_bridge.h | 8 ++ + 2 files changed, 137 insertions(+), 48 deletions(-) + +--- a/drivers/gpu/drm/drm_bridge.c ++++ b/drivers/gpu/drm/drm_bridge.c +@@ -547,20 +547,15 @@ EXPORT_SYMBOL(drm_bridge_chain_disable); + * encoder chain, starting from the first bridge to the last. These are called + * after completing the encoder's prepare op. + * ++ * If a bridge sets @pre_enable_upstream_first, then the @post_disable for that ++ * bridge will be called before the previous one to reverse the @pre_enable ++ * calling direction. ++ * + * Note: the bridge passed should be the one closest to the encoder + */ + void drm_bridge_chain_post_disable(struct drm_bridge *bridge) + { +- struct drm_encoder *encoder; +- +- if (!bridge) +- return; +- +- encoder = bridge->encoder; +- list_for_each_entry_from(bridge, &encoder->bridge_chain, chain_node) { +- if (bridge->funcs->post_disable) +- bridge->funcs->post_disable(bridge); +- } ++ drm_atomic_bridge_chain_post_disable(bridge, NULL); + } + EXPORT_SYMBOL(drm_bridge_chain_post_disable); + +@@ -602,24 +597,14 @@ EXPORT_SYMBOL(drm_bridge_chain_mode_set) + * chain, starting from the last bridge to the first. These are called + * before calling the encoder's commit op. + * ++ * If a bridge sets @pre_enable_upstream_first, then the @pre_enable for the ++ * previous bridge will be called before @pre_enable of this bridge. ++ * + * Note: the bridge passed should be the one closest to the encoder + */ + void drm_bridge_chain_pre_enable(struct drm_bridge *bridge) + { +- struct drm_encoder *encoder; +- struct drm_bridge *iter; +- +- if (!bridge) +- return; +- +- encoder = bridge->encoder; +- list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) { +- if (iter->funcs->pre_enable) +- iter->funcs->pre_enable(iter); +- +- if (iter == bridge) +- break; +- } ++ drm_atomic_bridge_chain_pre_enable(bridge, NULL); + } + EXPORT_SYMBOL(drm_bridge_chain_pre_enable); + +@@ -691,6 +676,25 @@ void drm_atomic_bridge_chain_disable(str + } + EXPORT_SYMBOL(drm_atomic_bridge_chain_disable); + ++static void drm_atomic_bridge_call_post_disable(struct drm_bridge *bridge, ++ struct drm_atomic_state *old_state) ++{ ++ if (old_state && bridge->funcs->atomic_post_disable) { ++ struct drm_bridge_state *old_bridge_state; ++ ++ old_bridge_state = ++ drm_atomic_get_old_bridge_state(old_state, ++ bridge); ++ if (WARN_ON(!old_bridge_state)) ++ return; ++ ++ bridge->funcs->atomic_post_disable(bridge, ++ old_bridge_state); ++ } else if (bridge->funcs->post_disable) { ++ bridge->funcs->post_disable(bridge); ++ } ++} ++ + /** + * drm_atomic_bridge_chain_post_disable - cleans up after disabling all bridges + * in the encoder chain +@@ -701,6 +705,9 @@ EXPORT_SYMBOL(drm_atomic_bridge_chain_di + * &drm_bridge_funcs.post_disable) op for all the bridges in the encoder chain, + * starting from the first bridge to the last. These are called after completing + * &drm_encoder_helper_funcs.atomic_disable ++ * If a bridge sets @pre_enable_upstream_first, then the @post_disable for that ++ * bridge will be called before the previous one to reverse the @pre_enable ++ * calling direction. + * + * Note: the bridge passed should be the one closest to the encoder + */ +@@ -708,30 +715,75 @@ void drm_atomic_bridge_chain_post_disabl + struct drm_atomic_state *old_state) + { + struct drm_encoder *encoder; ++ struct drm_bridge *next, *limit; + + if (!bridge) + return; + + encoder = bridge->encoder; ++ + list_for_each_entry_from(bridge, &encoder->bridge_chain, chain_node) { +- if (bridge->funcs->atomic_post_disable) { +- struct drm_bridge_state *old_bridge_state; ++ limit = NULL; + +- old_bridge_state = +- drm_atomic_get_old_bridge_state(old_state, +- bridge); +- if (WARN_ON(!old_bridge_state)) +- return; ++ if (!list_is_last(&bridge->chain_node, &encoder->bridge_chain)) { ++ next = list_next_entry(bridge, chain_node); + +- bridge->funcs->atomic_post_disable(bridge, +- old_bridge_state); +- } else if (bridge->funcs->post_disable) { +- bridge->funcs->post_disable(bridge); ++ if (next->pre_enable_upstream_first) { ++ /* Downstream bridge had requested that upstream ++ * was enabled first, so disabled last ++ */ ++ limit = next; ++ ++ /* Find the next bridge that has NOT requested ++ * upstream to be enabled first / disabled last ++ */ ++ list_for_each_entry_from(next, &encoder->bridge_chain, ++ chain_node) { ++ if (next->pre_enable_upstream_first) { ++ next = list_prev_entry(next, chain_node); ++ limit = next; ++ break; ++ } ++ } ++ ++ /* Call these bridges in reverse order */ ++ list_for_each_entry_from_reverse(next, &encoder->bridge_chain, ++ chain_node) { ++ if (next == bridge) ++ break; ++ ++ drm_atomic_bridge_call_post_disable(next, ++ old_state); ++ } ++ } + } ++ ++ drm_atomic_bridge_call_post_disable(bridge, old_state); ++ ++ if (limit) ++ bridge = limit; + } + } + EXPORT_SYMBOL(drm_atomic_bridge_chain_post_disable); + ++static void drm_atomic_bridge_call_pre_enable(struct drm_bridge *bridge, ++ struct drm_atomic_state *old_state) ++{ ++ if (old_state && bridge->funcs->atomic_pre_enable) { ++ struct drm_bridge_state *old_bridge_state; ++ ++ old_bridge_state = ++ drm_atomic_get_old_bridge_state(old_state, ++ bridge); ++ if (WARN_ON(!old_bridge_state)) ++ return; ++ ++ bridge->funcs->atomic_pre_enable(bridge, old_bridge_state); ++ } else if (bridge->funcs->pre_enable) { ++ bridge->funcs->pre_enable(bridge); ++ } ++} ++ + /** + * drm_atomic_bridge_chain_pre_enable - prepares for enabling all bridges in + * the encoder chain +@@ -743,33 +795,62 @@ EXPORT_SYMBOL(drm_atomic_bridge_chain_po + * starting from the last bridge to the first. These are called before calling + * &drm_encoder_helper_funcs.atomic_enable + * ++ * If a bridge sets @pre_enable_upstream_first, then the pre_enable for the ++ * upstream bridge will be called before pre_enable of this bridge. ++ * + * Note: the bridge passed should be the one closest to the encoder + */ + void drm_atomic_bridge_chain_pre_enable(struct drm_bridge *bridge, + struct drm_atomic_state *old_state) + { + struct drm_encoder *encoder; +- struct drm_bridge *iter; ++ struct drm_bridge *iter, *next, *limit; + + if (!bridge) + return; + + encoder = bridge->encoder; +- list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) { +- if (iter->funcs->atomic_pre_enable) { +- struct drm_bridge_state *old_bridge_state; + +- old_bridge_state = +- drm_atomic_get_old_bridge_state(old_state, +- iter); +- if (WARN_ON(!old_bridge_state)) +- return; ++ list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) { ++ if (iter->pre_enable_upstream_first) { ++ next = iter; ++ limit = bridge; ++ list_for_each_entry_from_reverse(next, ++ &encoder->bridge_chain, ++ chain_node) { ++ if (next == bridge) ++ break; ++ ++ if (!next->pre_enable_upstream_first) { ++ /* Found first bridge that does NOT ++ * request upstream to be enabled first ++ */ ++ limit = list_prev_entry(next, chain_node); ++ break; ++ } ++ } ++ ++ list_for_each_entry_from(next, &encoder->bridge_chain, chain_node) { ++ /* Call requested upstream bridge pre_enable ++ * in order. ++ */ ++ if (next == iter) ++ /* At the first bridgge to request upstream ++ * bridges called first. ++ */ ++ break; + +- iter->funcs->atomic_pre_enable(iter, old_bridge_state); +- } else if (iter->funcs->pre_enable) { +- iter->funcs->pre_enable(iter); ++ drm_atomic_bridge_call_pre_enable(next, old_state); ++ } + } + ++ drm_atomic_bridge_call_pre_enable(iter, old_state); ++ ++ if (iter->pre_enable_upstream_first) ++ /* Jump all bridges that we have already pre_enabled ++ */ ++ iter = limit; ++ + if (iter == bridge) + break; + } +--- a/include/drm/drm_bridge.h ++++ b/include/drm/drm_bridge.h +@@ -769,6 +769,14 @@ struct drm_bridge { + */ + bool interlace_allowed; + /** ++ * @pre_enable_upstream_first: The bridge requires that the upstream ++ * bridge @pre_enable function is called before its @pre_enable, ++ * and conversely for post_disable. This is most frequently a ++ * requirement for DSI devices which need the host to be initialised ++ * before the peripheral. ++ */ ++ bool pre_enable_upstream_first; ++ /** + * @ddc: Associated I2C adapter for DDC access, if any. + */ + struct i2c_adapter *ddc; diff --git a/target/linux/bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch b/target/linux/bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch new file mode 100644 index 0000000000..6ca65ab3f3 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0035-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch @@ -0,0 +1,48 @@ +From 9ac3eedd8cda7d5f2429edc0bdba137c35e07157 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Wed, 23 Feb 2022 15:36:56 +0000 +Subject: [PATCH] drm/panel: Add prepare_upstream_first flag to + drm_panel + +Mapping to the drm_bridge flag pre_enable_upstream_first, +add a new flag prepare_upstream_first to drm_panel to allow +the panel driver to request that the upstream bridge should +be pre_enabled before the panel prepare. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/bridge/panel.c | 3 +++ + include/drm/drm_panel.h | 10 ++++++++++ + 2 files changed, 13 insertions(+) + +--- a/drivers/gpu/drm/bridge/panel.c ++++ b/drivers/gpu/drm/bridge/panel.c +@@ -258,6 +258,9 @@ struct drm_bridge *drm_panel_bridge_add_ + panel_bridge->bridge.ops = DRM_BRIDGE_OP_MODES; + panel_bridge->bridge.type = connector_type; + ++ panel_bridge->bridge.pre_enable_upstream_first = ++ panel->prepare_upstream_first; ++ + drm_bridge_add(&panel_bridge->bridge); + + return &panel_bridge->bridge; +--- a/include/drm/drm_panel.h ++++ b/include/drm/drm_panel.h +@@ -196,6 +196,16 @@ struct drm_panel { + * Panel entry in registry. + */ + struct list_head list; ++ ++ /** ++ * @prepare_upstream_first: ++ * ++ * The upstream controller should be prepared first, before the prepare ++ * for the panel is called. This is largely required for DSI panels ++ * where the DSI host controller should be initialised to LP-11 before ++ * the panel is powered up. ++ */ ++ bool prepare_upstream_first; + }; + + void drm_panel_init(struct drm_panel *panel, struct device *dev, diff --git a/target/linux/bcm27xx/patches-6.1/950-0036-drm-Include-drm_connector.h-from-drm_panel.h.patch b/target/linux/bcm27xx/patches-6.1/950-0036-drm-Include-drm_connector.h-from-drm_panel.h.patch new file mode 100644 index 0000000000..75a4a30caf --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0036-drm-Include-drm_connector.h-from-drm_panel.h.patch @@ -0,0 +1,36 @@ +From 16e9466e562335961f89ec25bd60bff4cf82f7ad Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 11 Mar 2022 17:24:37 +0000 +Subject: [PATCH] drm: Include drm_connector.h from drm_panel.h + +drm_panel.h wants to reference enum drm_panel_orientation which is defined +in drm_connector.h (despite the name). +Include drm_connector.h in drm_panel.h to avoid the rare situation where +drm_panel.h is used with drm_connector.h + +https://github.com/raspberrypi/linux/issues/4919 + +Signed-off-by: Dave Stevenson +--- + include/drm/drm_panel.h | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/include/drm/drm_panel.h ++++ b/include/drm/drm_panel.h +@@ -24,6 +24,7 @@ + #ifndef __DRM_PANEL_H__ + #define __DRM_PANEL_H__ + ++#include + #include + #include + #include +@@ -36,8 +37,6 @@ struct drm_device; + struct drm_panel; + struct display_timing; + +-enum drm_panel_orientation; +- + /** + * struct drm_panel_funcs - perform operations on a given panel + * diff --git a/target/linux/bcm27xx/patches-6.1/950-0037-drm-tc358762-Set-the-pre_enable_upstream_first-flag-.patch b/target/linux/bcm27xx/patches-6.1/950-0037-drm-tc358762-Set-the-pre_enable_upstream_first-flag-.patch new file mode 100644 index 0000000000..2cf35236bd --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0037-drm-tc358762-Set-the-pre_enable_upstream_first-flag-.patch @@ -0,0 +1,25 @@ +From 2551dd11f3c6f1633f7aa9ec2c68b1c9831b3559 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 16 Dec 2021 15:33:43 +0000 +Subject: [PATCH] drm/tc358762: Set the pre_enable_upstream_first flag + to configure DSI host + +TC358762 wants the DSI host to be prepared before it is powered up, so +set the flag to request that the upstream bridges have their +pre_enable called first. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/bridge/tc358762.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/gpu/drm/bridge/tc358762.c ++++ b/drivers/gpu/drm/bridge/tc358762.c +@@ -229,6 +229,7 @@ static int tc358762_probe(struct mipi_ds + ctx->bridge.funcs = &tc358762_bridge_funcs; + ctx->bridge.type = DRM_MODE_CONNECTOR_DPI; + ctx->bridge.of_node = dev->of_node; ++ ctx->bridge.pre_enable_upstream_first = true; + + drm_bridge_add(&ctx->bridge); + diff --git a/target/linux/bcm27xx/patches-6.1/950-0038-drm-vc4-Support-zpos-on-all-planes.patch b/target/linux/bcm27xx/patches-6.1/950-0038-drm-vc4-Support-zpos-on-all-planes.patch new file mode 100644 index 0000000000..068862766f --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0038-drm-vc4-Support-zpos-on-all-planes.patch @@ -0,0 +1,144 @@ +From 7354aa4ed8b97b3bd7706e6440a087491a47fb39 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 25 Jan 2022 17:28:18 +0000 +Subject: [PATCH] drm/vc4: Support zpos on all planes + +Adds the zpos property to all planes, and creates the dlist +by placing the fragments in the correct order based on zpos. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 43 +++++++++++++++++++++------------ + drivers/gpu/drm/vc4/vc4_kms.c | 3 +-- + drivers/gpu/drm/vc4/vc4_plane.c | 22 ++++++++++++++--- + 3 files changed, 48 insertions(+), 20 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -769,6 +769,8 @@ void vc4_hvs_atomic_flush(struct drm_crt + bool enable_bg_fill = false; + u32 __iomem *dlist_start = vc4->hvs->dlist + vc4_state->mm.start; + u32 __iomem *dlist_next = dlist_start; ++ unsigned int zpos = 0; ++ bool found = false; + int idx; + + if (!drm_dev_enter(dev, &idx)) { +@@ -782,23 +784,34 @@ void vc4_hvs_atomic_flush(struct drm_crt + } + + /* Copy all the active planes' dlist contents to the hardware dlist. */ +- drm_atomic_crtc_for_each_plane(plane, crtc) { +- /* Is this the first active plane? */ +- if (dlist_next == dlist_start) { +- /* We need to enable background fill when a plane +- * could be alpha blending from the background, i.e. +- * where no other plane is underneath. It suffices to +- * consider the first active plane here since we set +- * needs_bg_fill such that either the first plane +- * already needs it or all planes on top blend from +- * the first or a lower plane. +- */ +- vc4_plane_state = to_vc4_plane_state(plane->state); +- enable_bg_fill = vc4_plane_state->needs_bg_fill; ++ do { ++ found = false; ++ ++ drm_atomic_crtc_for_each_plane(plane, crtc) { ++ if (plane->state->normalized_zpos != zpos) ++ continue; ++ ++ /* Is this the first active plane? */ ++ if (dlist_next == dlist_start) { ++ /* We need to enable background fill when a plane ++ * could be alpha blending from the background, i.e. ++ * where no other plane is underneath. It suffices to ++ * consider the first active plane here since we set ++ * needs_bg_fill such that either the first plane ++ * already needs it or all planes on top blend from ++ * the first or a lower plane. ++ */ ++ vc4_plane_state = to_vc4_plane_state(plane->state); ++ enable_bg_fill = vc4_plane_state->needs_bg_fill; ++ } ++ ++ dlist_next += vc4_plane_write_dlist(plane, dlist_next); ++ ++ found = true; + } + +- dlist_next += vc4_plane_write_dlist(plane, dlist_next); +- } ++ zpos++; ++ } while (found); + + writel(SCALER_CTL0_END, dlist_next); + dlist_next++; +--- a/drivers/gpu/drm/vc4/vc4_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_kms.c +@@ -1066,8 +1066,7 @@ int vc4_kms_load(struct drm_device *dev) + dev->mode_config.helper_private = &vc4_mode_config_helpers; + dev->mode_config.preferred_depth = 24; + dev->mode_config.async_page_flip = true; +- if (vc4->firmware_kms) +- dev->mode_config.normalize_zpos = true; ++ dev->mode_config.normalize_zpos = true; + + ret = vc4_ctm_obj_init(vc4); + if (ret) +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -1600,9 +1600,14 @@ struct drm_plane *vc4_plane_init(struct + DRM_COLOR_YCBCR_BT709, + DRM_COLOR_YCBCR_LIMITED_RANGE); + ++ if (type == DRM_PLANE_TYPE_PRIMARY) ++ drm_plane_create_zpos_immutable_property(plane, 0); ++ + return plane; + } + ++#define VC4_NUM_OVERLAY_PLANES 16 ++ + int vc4_plane_create_additional_planes(struct drm_device *drm) + { + struct drm_plane *cursor_plane; +@@ -1618,24 +1623,35 @@ int vc4_plane_create_additional_planes(s + * modest number of planes to expose, that should hopefully + * still cover any sane usecase. + */ +- for (i = 0; i < 16; i++) { ++ for (i = 0; i < VC4_NUM_OVERLAY_PLANES; i++) { + struct drm_plane *plane = + vc4_plane_init(drm, DRM_PLANE_TYPE_OVERLAY, + GENMASK(drm->mode_config.num_crtc - 1, 0)); + + if (IS_ERR(plane)) + continue; ++ ++ /* Create zpos property. Max of all the overlays + 1 primary + ++ * 1 cursor plane on a crtc. ++ */ ++ drm_plane_create_zpos_property(plane, i + 1, 1, ++ VC4_NUM_OVERLAY_PLANES + 1); + } + + drm_for_each_crtc(crtc, drm) { + /* Set up the legacy cursor after overlay initialization, +- * since we overlay planes on the CRTC in the order they were +- * initialized. ++ * since the zpos fallback is that planes are rendered by plane ++ * ID order, and that then puts the cursor on top. + */ + cursor_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_CURSOR, + drm_crtc_mask(crtc)); + if (!IS_ERR(cursor_plane)) { + crtc->cursor = cursor_plane; ++ ++ drm_plane_create_zpos_property(cursor_plane, ++ VC4_NUM_OVERLAY_PLANES + 1, ++ 1, ++ VC4_NUM_OVERLAY_PLANES + 1); + } + } + diff --git a/target/linux/bcm27xx/patches-6.1/950-0039-drm-vc4-hdmi-Add-CSC-for-BT601-709-2020-limited-and-.patch b/target/linux/bcm27xx/patches-6.1/950-0039-drm-vc4-hdmi-Add-CSC-for-BT601-709-2020-limited-and-.patch new file mode 100644 index 0000000000..b1fa4825e5 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0039-drm-vc4-hdmi-Add-CSC-for-BT601-709-2020-limited-and-.patch @@ -0,0 +1,301 @@ +From 6729f3d6ace95770cfda201fd04fafcc2e46fd36 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 7 Mar 2022 15:19:38 +0000 +Subject: [PATCH] drm/vc4: hdmi: Add CSC for BT601/709/2020 limited and + full range output + +The HVS always composes in the RGB domain, but there is a colourspace +conversion block on the output to allow for sending YCbCr over the +HDMI interface. +The colourspace on that link is configurable via the "Colorspace" +property on the connector, and that updates the infoframes. There +is also selection of limited or full range based on the mode selected +or an override. + +Add code to update the CSC as well so that the metadata matches the +image data. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 196 ++++++++++++++++++++++++--------- + 1 file changed, 145 insertions(+), 51 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -158,8 +158,8 @@ static bool vc4_hdmi_mode_needs_scrambli + return clock > HDMI_14_MAX_TMDS_CLK; + } + +-static bool vc4_hdmi_is_full_range_rgb(struct vc4_hdmi *vc4_hdmi, +- const struct drm_display_mode *mode) ++static bool vc4_hdmi_is_full_range(struct vc4_hdmi *vc4_hdmi, ++ const struct drm_display_mode *mode) + { + struct drm_display_info *display = &vc4_hdmi->connector.display_info; + +@@ -901,7 +901,7 @@ static void vc4_hdmi_set_avi_infoframe(s + + drm_hdmi_avi_infoframe_quant_range(&frame.avi, + connector, mode, +- vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode) ? ++ vc4_hdmi_is_full_range(vc4_hdmi, mode) ? + HDMI_QUANTIZATION_RANGE_FULL : + HDMI_QUANTIZATION_RANGE_LIMITED); + drm_hdmi_avi_infoframe_colorimetry(&frame.avi, cstate); +@@ -1154,7 +1154,7 @@ static void vc4_hdmi_csc_setup(struct vc + csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR, + VC4_HD_CSC_CTL_ORDER); + +- if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) { ++ if (!vc4_hdmi_is_full_range(vc4_hdmi, mode)) { + /* CEA VICs other than #1 requre limited range RGB + * output unless overridden by an AVI infoframe. + * Apply a colorspace conversion to squash 0-255 down +@@ -1193,15 +1193,6 @@ static void vc4_hdmi_csc_setup(struct vc + * [ 0 1 0 0] + * [ 0 0 1 0] + * +- * Matrix is signed 2p13 fixed point, with signed 9p6 offsets +- */ +-static const u16 vc5_hdmi_csc_full_rgb_unity[3][4] = { +- { 0x2000, 0x0000, 0x0000, 0x0000 }, +- { 0x0000, 0x2000, 0x0000, 0x0000 }, +- { 0x0000, 0x0000, 0x2000, 0x0000 }, +-}; +- +-/* + * CEA VICs other than #1 require limited range RGB output unless + * overridden by an AVI infoframe. Apply a colorspace conversion to + * squash 0-255 down to 16-235. The matrix here is: +@@ -1212,43 +1203,105 @@ static const u16 vc5_hdmi_csc_full_rgb_u + * + * Matrix is signed 2p13 fixed point, with signed 9p6 offsets + */ +-static const u16 vc5_hdmi_csc_full_rgb_to_limited_rgb[3][4] = { +- { 0x1b80, 0x0000, 0x0000, 0x0400 }, +- { 0x0000, 0x1b80, 0x0000, 0x0400 }, +- { 0x0000, 0x0000, 0x1b80, 0x0400 }, ++static const u16 vc5_hdmi_csc_full_rgb_to_rgb[2][3][4] = { ++ { ++ /* Full range - unity */ ++ { 0x2000, 0x0000, 0x0000, 0x0000 }, ++ { 0x0000, 0x2000, 0x0000, 0x0000 }, ++ { 0x0000, 0x0000, 0x2000, 0x0000 }, ++ }, { ++ /* Limited range */ ++ { 0x1b80, 0x0000, 0x0000, 0x0400 }, ++ { 0x0000, 0x1b80, 0x0000, 0x0400 }, ++ { 0x0000, 0x0000, 0x1b80, 0x0400 }, ++ } ++}; ++ ++/* ++ * Conversion between Full Range RGB and YUV using the BT.601 Colorspace ++ * ++ * Full range ++ * [ 0.299000 0.587000 0.114000 0.000000 ] ++ * [ -0.168736 -0.331264 0.500000 128.000000 ] ++ * [ 0.500000 -0.418688 -0.081312 128.000000 ] ++ * ++ * Limited range ++ * [ 0.255785 0.502160 0.097523 16.000000 ] ++ * [ -0.147644 -0.289856 0.437500 128.000000 ] ++ * [ 0.437500 -0.366352 -0.071148 128.000000 ] ++ * ++ * Matrix is signed 2p13 fixed point, with signed 9p6 offsets ++ */ ++static const u16 vc5_hdmi_csc_full_rgb_to_yuv_bt601[2][3][4] = { ++ { ++ /* Full range */ ++ { 0x0991, 0x12c9, 0x03a6, 0x0000 }, ++ { 0xfa9b, 0xf567, 0x1000, 0x2000 }, ++ { 0x1000, 0xf29b, 0xfd67, 0x2000 }, ++ }, { ++ /* Limited range */ ++ { 0x082f, 0x1012, 0x031f, 0x0400 }, ++ { 0xfb48, 0xf6ba, 0x0e00, 0x2000 }, ++ { 0x0e00, 0xf448, 0xfdba, 0x2000 }, ++ } + }; + + /* +- * Conversion between Full Range RGB and Full Range YUV422 using the +- * BT.709 Colorspace ++ * Conversion between Full Range RGB and YUV using the BT.709 Colorspace + * ++ * Full range ++ * [ 0.212600 0.715200 0.072200 0.000000 ] ++ * [ -0.114572 -0.385428 0.500000 128.000000 ] ++ * [ 0.500000 -0.454153 -0.045847 128.000000 ] + * +- * [ 0.181906 0.611804 0.061758 16 ] +- * [ -0.100268 -0.337232 0.437500 128 ] +- * [ 0.437500 -0.397386 -0.040114 128 ] ++ * Limited range ++ * [ 0.181873 0.611831 0.061765 16.000000 ] ++ * [ -0.100251 -0.337249 0.437500 128.000000 ] ++ * [ 0.437500 -0.397384 -0.040116 128.000000 ] + * + * Matrix is signed 2p13 fixed point, with signed 9p6 offsets + */ +-static const u16 vc5_hdmi_csc_full_rgb_to_limited_yuv422_bt709[3][4] = { +- { 0x05d2, 0x1394, 0x01fa, 0x0400 }, +- { 0xfccc, 0xf536, 0x0e00, 0x2000 }, +- { 0x0e00, 0xf34a, 0xfeb8, 0x2000 }, ++static const u16 vc5_hdmi_csc_full_rgb_to_yuv_bt709[2][3][4] = { ++ { ++ /* Full range */ ++ { 0x06ce, 0x16e3, 0x024f, 0x0000 }, ++ { 0xfc56, 0xf3ac, 0x1000, 0x2000 }, ++ { 0x1000, 0xf179, 0xfe89, 0x2000 }, ++ }, { ++ /* Limited range */ ++ { 0x05d2, 0x1394, 0x01fa, 0x0400 }, ++ { 0xfccc, 0xf536, 0x0e00, 0x2000 }, ++ { 0x0e00, 0xf34a, 0xfeb8, 0x2000 }, ++ } + }; + + /* +- * Conversion between Full Range RGB and Full Range YUV444 using the +- * BT.709 Colorspace ++ * Conversion between Full Range RGB and YUV using the BT.2020 Colorspace + * +- * [ -0.100268 -0.337232 0.437500 128 ] +- * [ 0.437500 -0.397386 -0.040114 128 ] +- * [ 0.181906 0.611804 0.061758 16 ] ++ * Full range ++ * [ 0.262700 0.678000 0.059300 0.000000 ] ++ * [ -0.139630 -0.360370 0.500000 128.000000 ] ++ * [ 0.500000 -0.459786 -0.040214 128.000000 ] ++ * ++ * Limited range ++ * [ 0.224732 0.580008 0.050729 16.000000 ] ++ * [ -0.122176 -0.315324 0.437500 128.000000 ] ++ * [ 0.437500 -0.402312 -0.035188 128.000000 ] + * + * Matrix is signed 2p13 fixed point, with signed 9p6 offsets + */ +-static const u16 vc5_hdmi_csc_full_rgb_to_limited_yuv444_bt709[3][4] = { +- { 0xfccc, 0xf536, 0x0e00, 0x2000 }, +- { 0x0e00, 0xf34a, 0xfeb8, 0x2000 }, +- { 0x05d2, 0x1394, 0x01fa, 0x0400 }, ++static const u16 vc5_hdmi_csc_full_rgb_to_yuv_bt2020[2][3][4] = { ++ { ++ /* Full range */ ++ { 0x0868, 0x15b2, 0x01e6, 0x0000 }, ++ { 0xfb89, 0xf479, 0x1000, 0x2000 }, ++ { 0x1000, 0xf14a, 0xfeb8, 0x2000 }, ++ }, { ++ /* Limited range */ ++ { 0x0731, 0x128f, 0x01a0, 0x0400 }, ++ { 0xfc18, 0xf5ea, 0x0e00, 0x2000 }, ++ { 0x0e00, 0xf321, 0xfee1, 0x2000 }, ++ } + }; + + static void vc5_hdmi_set_csc_coeffs(struct vc4_hdmi *vc4_hdmi, +@@ -1264,6 +1317,20 @@ static void vc5_hdmi_set_csc_coeffs(stru + HDMI_WRITE(HDMI_CSC_34_33, (coeffs[2][3] << 16) | coeffs[2][2]); + } + ++static void vc5_hdmi_set_csc_coeffs_swap(struct vc4_hdmi *vc4_hdmi, ++ const u16 coeffs[3][4]) ++{ ++ lockdep_assert_held(&vc4_hdmi->hw_lock); ++ ++ /* YUV444 needs the CSC matrices using the channels in a different order */ ++ HDMI_WRITE(HDMI_CSC_12_11, (coeffs[2][1] << 16) | coeffs[2][0]); ++ HDMI_WRITE(HDMI_CSC_14_13, (coeffs[2][3] << 16) | coeffs[2][2]); ++ HDMI_WRITE(HDMI_CSC_22_21, (coeffs[0][1] << 16) | coeffs[0][0]); ++ HDMI_WRITE(HDMI_CSC_24_23, (coeffs[0][3] << 16) | coeffs[0][2]); ++ HDMI_WRITE(HDMI_CSC_32_31, (coeffs[1][1] << 16) | coeffs[1][0]); ++ HDMI_WRITE(HDMI_CSC_34_33, (coeffs[1][3] << 16) | coeffs[1][2]); ++} ++ + static void vc5_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, + struct drm_connector_state *state, + const struct drm_display_mode *mode) +@@ -1271,6 +1338,8 @@ static void vc5_hdmi_csc_setup(struct vc + struct drm_device *drm = vc4_hdmi->connector.dev; + struct vc4_hdmi_connector_state *vc4_state = + conn_state_to_vc4_hdmi_conn_state(state); ++ unsigned int lim_range = vc4_hdmi_is_full_range(vc4_hdmi, mode) ? 0 : 1; ++ const u16 (*csc)[4]; + unsigned long flags; + u32 if_cfg = 0; + u32 if_xbar = 0x543210; +@@ -1286,31 +1355,56 @@ static void vc5_hdmi_csc_setup(struct vc + + switch (vc4_state->output_format) { + case VC4_HDMI_OUTPUT_YUV444: +- vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_limited_yuv444_bt709); +- break; +- + case VC4_HDMI_OUTPUT_YUV422: +- csc_ctl |= VC4_SET_FIELD(VC5_MT_CP_CSC_CTL_FILTER_MODE_444_TO_422_STANDARD, +- VC5_MT_CP_CSC_CTL_FILTER_MODE_444_TO_422) | +- VC5_MT_CP_CSC_CTL_USE_444_TO_422 | +- VC5_MT_CP_CSC_CTL_USE_RNG_SUPPRESSION; +- +- csc_chan_ctl |= VC4_SET_FIELD(VC5_MT_CP_CHANNEL_CTL_OUTPUT_REMAP_LEGACY_STYLE, +- VC5_MT_CP_CHANNEL_CTL_OUTPUT_REMAP); ++ switch (state->colorspace) { ++ default: ++ case DRM_MODE_COLORIMETRY_NO_DATA: ++ case DRM_MODE_COLORIMETRY_BT709_YCC: ++ case DRM_MODE_COLORIMETRY_XVYCC_709: ++ case DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED: ++ case DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT: ++ csc = vc5_hdmi_csc_full_rgb_to_yuv_bt709[lim_range]; ++ break; ++ case DRM_MODE_COLORIMETRY_SMPTE_170M_YCC: ++ case DRM_MODE_COLORIMETRY_XVYCC_601: ++ case DRM_MODE_COLORIMETRY_SYCC_601: ++ case DRM_MODE_COLORIMETRY_OPYCC_601: ++ case DRM_MODE_COLORIMETRY_BT601_YCC: ++ csc = vc5_hdmi_csc_full_rgb_to_yuv_bt601[lim_range]; ++ break; ++ case DRM_MODE_COLORIMETRY_BT2020_CYCC: ++ case DRM_MODE_COLORIMETRY_BT2020_YCC: ++ case DRM_MODE_COLORIMETRY_BT2020_RGB: ++ case DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65: ++ case DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER: ++ csc = vc5_hdmi_csc_full_rgb_to_yuv_bt2020[lim_range]; ++ break; ++ } + +- if_cfg |= VC4_SET_FIELD(VC5_DVP_HT_VEC_INTERFACE_CFG_SEL_422_FORMAT_422_LEGACY, +- VC5_DVP_HT_VEC_INTERFACE_CFG_SEL_422); ++ if (vc4_state->output_format == VC4_HDMI_OUTPUT_YUV422) { ++ csc_ctl |= VC4_SET_FIELD(VC5_MT_CP_CSC_CTL_FILTER_MODE_444_TO_422_STANDARD, ++ VC5_MT_CP_CSC_CTL_FILTER_MODE_444_TO_422) | ++ VC5_MT_CP_CSC_CTL_USE_444_TO_422 | ++ VC5_MT_CP_CSC_CTL_USE_RNG_SUPPRESSION; ++ ++ csc_chan_ctl |= VC4_SET_FIELD(VC5_MT_CP_CHANNEL_CTL_OUTPUT_REMAP_LEGACY_STYLE, ++ VC5_MT_CP_CHANNEL_CTL_OUTPUT_REMAP); ++ ++ if_cfg |= VC4_SET_FIELD(VC5_DVP_HT_VEC_INTERFACE_CFG_SEL_422_FORMAT_422_LEGACY, ++ VC5_DVP_HT_VEC_INTERFACE_CFG_SEL_422); ++ ++ vc5_hdmi_set_csc_coeffs(vc4_hdmi, csc); ++ } else { ++ vc5_hdmi_set_csc_coeffs_swap(vc4_hdmi, csc); ++ } + +- vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_limited_yuv422_bt709); + break; + + case VC4_HDMI_OUTPUT_RGB: + if_xbar = 0x354021; + +- if (!vc4_hdmi_is_full_range_rgb(vc4_hdmi, mode)) +- vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_to_limited_rgb); +- else +- vc5_hdmi_set_csc_coeffs(vc4_hdmi, vc5_hdmi_csc_full_rgb_unity); ++ vc5_hdmi_set_csc_coeffs(vc4_hdmi, ++ vc5_hdmi_csc_full_rgb_to_rgb[lim_range]); + break; + + default: diff --git a/target/linux/bcm27xx/patches-6.1/950-0040-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch b/target/linux/bcm27xx/patches-6.1/950-0040-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch new file mode 100644 index 0000000000..0b4b2bc6cd --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0040-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch @@ -0,0 +1,212 @@ +From dabc8fbdb2e159d27b5f02ac428fa5788c2c4c2a Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Mon, 14 Mar 2022 17:56:10 +0000 +Subject: [PATCH] vc4/drm: vc4_plane: Keep fractional source coords + inside state + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/vc4_drv.h | 2 +- + drivers/gpu/drm/vc4/vc4_plane.c | 68 ++++++++++++++++----------------- + 2 files changed, 34 insertions(+), 36 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -384,7 +384,7 @@ struct vc4_plane_state { + + /* Clipped coordinates of the plane on the display. */ + int crtc_x, crtc_y, crtc_w, crtc_h; +- /* Clipped area being scanned from in the FB. */ ++ /* Clipped area being scanned from in the FB in u16.16 format */ + u32 src_x, src_y; + + u32 src_w[2], src_h[2]; +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -183,9 +183,9 @@ static const struct hvs_format *vc4_get_ + + static enum vc4_scaling_mode vc4_get_scaling_mode(u32 src, u32 dst) + { +- if (dst == src) ++ if (dst == src >> 16) + return VC4_SCALING_NONE; +- if (3 * dst >= 2 * src) ++ if (3 * dst >= 2 * (src >> 16)) + return VC4_SCALING_PPF; + else + return VC4_SCALING_TPZ; +@@ -394,15 +394,10 @@ static int vc4_plane_setup_clipping_and_ + vc4_state->offsets[i] = bo->dma_addr + fb->offsets[i]; + } + +- /* +- * We don't support subpixel source positioning for scaling, +- * but fractional coordinates can be generated by clipping +- * so just round for now +- */ +- vc4_state->src_x = DIV_ROUND_CLOSEST(state->src.x1, 1 << 16); +- vc4_state->src_y = DIV_ROUND_CLOSEST(state->src.y1, 1 << 16); +- vc4_state->src_w[0] = DIV_ROUND_CLOSEST(state->src.x2, 1 << 16) - vc4_state->src_x; +- vc4_state->src_h[0] = DIV_ROUND_CLOSEST(state->src.y2, 1 << 16) - vc4_state->src_y; ++ vc4_state->src_x = state->src.x1; ++ vc4_state->src_y = state->src.y1; ++ vc4_state->src_w[0] = state->src.x2 - vc4_state->src_x; ++ vc4_state->src_h[0] = state->src.y2 - vc4_state->src_y; + + vc4_state->crtc_x = state->dst.x1; + vc4_state->crtc_y = state->dst.y1; +@@ -455,7 +450,7 @@ static void vc4_write_tpz(struct vc4_pla + { + u32 scale, recip; + +- scale = (1 << 16) * src / dst; ++ scale = src / dst; + + /* The specs note that while the reciprocal would be defined + * as (1<<32)/scale, ~0 is close enough. +@@ -501,7 +496,7 @@ static u32 vc4_lbm_size(struct drm_plane + if (vc4_state->x_scaling[0] == VC4_SCALING_TPZ) + pix_per_line = vc4_state->crtc_w; + else +- pix_per_line = vc4_state->src_w[0]; ++ pix_per_line = vc4_state->src_w[0] >> 16; + + if (!vc4_state->is_yuv) { + if (vc4_state->y_scaling[0] == VC4_SCALING_TPZ) +@@ -592,7 +587,8 @@ static void vc4_plane_calc_load(struct d + for (i = 0; i < fb->format->num_planes; i++) { + /* Even if the bandwidth/plane required for a single frame is + * +- * vc4_state->src_w[i] * vc4_state->src_h[i] * cpp * vrefresh ++ * (vc4_state->src_w[i] >> 16) * (vc4_state->src_h[i] >> 16) * ++ * cpp * vrefresh + * + * when downscaling, we have to read more pixels per line in + * the time frame reserved for a single line, so the bandwidth +@@ -601,11 +597,11 @@ static void vc4_plane_calc_load(struct d + * load by this number. We're likely over-estimating the read + * demand, but that's better than under-estimating it. + */ +- vscale_factor = DIV_ROUND_UP(vc4_state->src_h[i], ++ vscale_factor = DIV_ROUND_UP(vc4_state->src_h[i] >> 16, + vc4_state->crtc_h); +- vc4_state->membus_load += vc4_state->src_w[i] * +- vc4_state->src_h[i] * vscale_factor * +- fb->format->cpp[i]; ++ vc4_state->membus_load += (vc4_state->src_w[i] >> 16) * ++ (vc4_state->src_h[i] >> 16) * ++ vscale_factor * fb->format->cpp[i]; + vc4_state->hvs_load += vc4_state->crtc_h * vc4_state->crtc_w; + } + +@@ -758,7 +754,8 @@ static int vc4_plane_mode_set(struct drm + bool mix_plane_alpha; + bool covers_screen; + u32 scl0, scl1, pitch0; +- u32 tiling, src_y; ++ u32 tiling, src_x, src_y; ++ u32 width, height; + u32 hvs_format = format->hvs; + unsigned int rotation; + int ret, i; +@@ -770,6 +767,9 @@ static int vc4_plane_mode_set(struct drm + if (ret) + return ret; + ++ width = vc4_state->src_w[0] >> 16; ++ height = vc4_state->src_h[0] >> 16; ++ + /* SCL1 is used for Cb/Cr scaling of planar formats. For RGB + * and 4:4:4, scl1 should be set to scl0 so both channels of + * the scaler do the same thing. For YUV, the Y plane needs +@@ -790,9 +790,11 @@ static int vc4_plane_mode_set(struct drm + DRM_MODE_REFLECT_Y); + + /* We must point to the last line when Y reflection is enabled. */ +- src_y = vc4_state->src_y; ++ src_y = vc4_state->src_y >> 16; + if (rotation & DRM_MODE_REFLECT_Y) +- src_y += vc4_state->src_h[0] - 1; ++ src_y += height - 1; ++ ++ src_x = vc4_state->src_x >> 16; + + switch (base_format_mod) { + case DRM_FORMAT_MOD_LINEAR: +@@ -807,7 +809,7 @@ static int vc4_plane_mode_set(struct drm + (i ? v_subsample : 1) * + fb->pitches[i]; + +- vc4_state->offsets[i] += vc4_state->src_x / ++ vc4_state->offsets[i] += src_x / + (i ? h_subsample : 1) * + fb->format->cpp[i]; + } +@@ -830,7 +832,7 @@ static int vc4_plane_mode_set(struct drm + * pitch * tile_h == tile_size * tiles_per_row + */ + u32 tiles_w = fb->pitches[0] >> (tile_size_shift - tile_h_shift); +- u32 tiles_l = vc4_state->src_x >> tile_w_shift; ++ u32 tiles_l = src_x >> tile_w_shift; + u32 tiles_r = tiles_w - tiles_l; + u32 tiles_t = src_y >> tile_h_shift; + /* Intra-tile offsets, which modify the base address (the +@@ -840,7 +842,7 @@ static int vc4_plane_mode_set(struct drm + u32 tile_y = (src_y >> 4) & 1; + u32 subtile_y = (src_y >> 2) & 3; + u32 utile_y = src_y & 3; +- u32 x_off = vc4_state->src_x & tile_w_mask; ++ u32 x_off = src_x & tile_w_mask; + u32 y_off = src_y & tile_h_mask; + + /* When Y reflection is requested we must set the +@@ -936,7 +938,7 @@ static int vc4_plane_mode_set(struct drm + * of the 12-pixels in that 128-bit word is the + * first pixel to be used + */ +- u32 remaining_pixels = vc4_state->src_x % 96; ++ u32 remaining_pixels = src_x % 96; + u32 aligned = remaining_pixels / 12; + u32 last_bits = remaining_pixels % 12; + +@@ -958,12 +960,12 @@ static int vc4_plane_mode_set(struct drm + return -EINVAL; + } + pix_per_tile = tile_w / fb->format->cpp[0]; +- x_off = (vc4_state->src_x % pix_per_tile) / ++ x_off = (src_x % pix_per_tile) / + (i ? h_subsample : 1) * + fb->format->cpp[i]; + } + +- tile = vc4_state->src_x / pix_per_tile; ++ tile = src_x / pix_per_tile; + + vc4_state->offsets[i] += param * tile_w * tile; + vc4_state->offsets[i] += src_y / +@@ -1024,10 +1026,8 @@ static int vc4_plane_mode_set(struct drm + vc4_dlist_write(vc4_state, + (mix_plane_alpha ? SCALER_POS2_ALPHA_MIX : 0) | + vc4_hvs4_get_alpha_blend_mode(state) | +- VC4_SET_FIELD(vc4_state->src_w[0], +- SCALER_POS2_WIDTH) | +- VC4_SET_FIELD(vc4_state->src_h[0], +- SCALER_POS2_HEIGHT)); ++ VC4_SET_FIELD(width, SCALER_POS2_WIDTH) | ++ VC4_SET_FIELD(height, SCALER_POS2_HEIGHT)); + + /* Position Word 3: Context. Written by the HVS. */ + vc4_dlist_write(vc4_state, 0xc0c0c0c0); +@@ -1085,10 +1085,8 @@ static int vc4_plane_mode_set(struct drm + /* Position Word 2: Source Image Size */ + vc4_state->pos2_offset = vc4_state->dlist_count; + vc4_dlist_write(vc4_state, +- VC4_SET_FIELD(vc4_state->src_w[0], +- SCALER5_POS2_WIDTH) | +- VC4_SET_FIELD(vc4_state->src_h[0], +- SCALER5_POS2_HEIGHT)); ++ VC4_SET_FIELD(width, SCALER5_POS2_WIDTH) | ++ VC4_SET_FIELD(height, SCALER5_POS2_HEIGHT)); + + /* Position Word 3: Context. Written by the HVS. */ + vc4_dlist_write(vc4_state, 0xc0c0c0c0); diff --git a/target/linux/bcm27xx/patches-6.1/950-0041-vc4-drm-Handle-fractional-coordinates-using-the-phas.patch b/target/linux/bcm27xx/patches-6.1/950-0041-vc4-drm-Handle-fractional-coordinates-using-the-phas.patch new file mode 100644 index 0000000000..087ec8ee2b --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0041-vc4-drm-Handle-fractional-coordinates-using-the-phas.patch @@ -0,0 +1,105 @@ +From 1f344e8eb017093573ddccd939b2dc5d930569dc Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Fri, 9 Apr 2021 15:00:40 +0100 +Subject: [PATCH] vc4/drm: Handle fractional coordinates using the + phase field + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/vc4_plane.c | 61 ++++++++++++++++++++++++++++++--- + 1 file changed, 56 insertions(+), 5 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -464,14 +464,47 @@ static void vc4_write_tpz(struct vc4_pla + VC4_SET_FIELD(recip, SCALER_TPZ1_RECIP)); + } + +-static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst) ++/* phase magnitude bits */ ++#define PHASE_BITS 6 ++ ++static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst, u32 xy, int channel) + { +- u32 scale = (1 << 16) * src / dst; ++ u32 scale = src / dst; ++ s32 offset, offset2; ++ s32 phase; ++ ++ /* Start the phase at 1/2 pixel from the 1st pixel at src_x. ++ 1/4 pixel for YUV. */ ++ if (channel) { ++ /* the phase is relative to scale_src->x, so shift it for display list's x value */ ++ offset = (xy & 0x1ffff) >> (16 - PHASE_BITS) >> 1; ++ offset += -(1 << PHASE_BITS >> 2); ++ } else { ++ /* the phase is relative to scale_src->x, so shift it for display list's x value */ ++ offset = (xy & 0xffff) >> (16 - PHASE_BITS); ++ offset += -(1 << PHASE_BITS >> 1); ++ ++ /* This is a kludge to make sure the scaling factors are consitent with YUV's luma scaling. ++ we lose 1bit precision because of this. */ ++ scale &= ~1; ++ } ++ ++ /* There may be a also small error introduced by precision of scale. ++ Add half of that as a compromise */ ++ offset2 = src - dst * scale; ++ offset2 >>= 16 - PHASE_BITS; ++ phase = offset + (offset2 >> 1); ++ ++ /* Ensure +ve values don't touch the sign bit, then truncate negative values */ ++ if (phase >= 1 << PHASE_BITS) ++ phase = (1 << PHASE_BITS) - 1; ++ ++ phase &= SCALER_PPF_IPHASE_MASK; + + vc4_dlist_write(vc4_state, + SCALER_PPF_AGC | + VC4_SET_FIELD(scale, SCALER_PPF_SCALE) | +- VC4_SET_FIELD(0, SCALER_PPF_IPHASE)); ++ VC4_SET_FIELD(phase, SCALER_PPF_IPHASE)); + } + + static u32 vc4_lbm_size(struct drm_plane_state *state) +@@ -530,13 +563,13 @@ static void vc4_write_scaling_parameters + /* Ch0 H-PPF Word 0: Scaling Parameters */ + if (vc4_state->x_scaling[channel] == VC4_SCALING_PPF) { + vc4_write_ppf(vc4_state, +- vc4_state->src_w[channel], vc4_state->crtc_w); ++ vc4_state->src_w[channel], vc4_state->crtc_w, vc4_state->src_x, channel); + } + + /* Ch0 V-PPF Words 0-1: Scaling Parameters, Context */ + if (vc4_state->y_scaling[channel] == VC4_SCALING_PPF) { + vc4_write_ppf(vc4_state, +- vc4_state->src_h[channel], vc4_state->crtc_h); ++ vc4_state->src_h[channel], vc4_state->crtc_h, vc4_state->src_y, channel); + vc4_dlist_write(vc4_state, 0xc0c0c0c0); + } + +@@ -984,6 +1017,24 @@ static int vc4_plane_mode_set(struct drm + return -EINVAL; + } + ++ /* fetch an extra pixel if we don't actually line up with the left edge. */ ++ if ((vc4_state->src_x & 0xffff) && vc4_state->src_x < (state->fb->width << 16)) ++ width++; ++ ++ /* same for the right side */ ++ if (((vc4_state->src_x + vc4_state->src_w[0]) & 0xffff) && ++ vc4_state->src_x + vc4_state->src_w[0] < (state->fb->width << 16)) ++ width++; ++ ++ /* now for the top */ ++ if ((vc4_state->src_y & 0xffff) && vc4_state->src_y < (state->fb->height << 16)) ++ height++; ++ ++ /* and the bottom */ ++ if (((vc4_state->src_y + vc4_state->src_h[0]) & 0xffff) && ++ vc4_state->src_y + vc4_state->src_h[0] < (state->fb->height << 16)) ++ height++; ++ + /* Don't waste cycles mixing with plane alpha if the set alpha + * is opaque or there is no per-pixel alpha information. + * In any case we use the alpha property value as the fixed alpha. diff --git a/target/linux/bcm27xx/patches-6.1/950-0042-drm-Add-chroma-siting-properties.patch b/target/linux/bcm27xx/patches-6.1/950-0042-drm-Add-chroma-siting-properties.patch new file mode 100644 index 0000000000..7ae221e8a9 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0042-drm-Add-chroma-siting-properties.patch @@ -0,0 +1,170 @@ +From ca82414470eea1d81f8fe4169ee19b89245989dc Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Wed, 26 Jan 2022 15:58:13 +0000 +Subject: [PATCH] drm: Add chroma siting properties + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/drm_atomic_state_helper.c | 14 +++++++++ + drivers/gpu/drm/drm_atomic_uapi.c | 8 +++++ + drivers/gpu/drm/drm_color_mgmt.c | 36 +++++++++++++++++++++++ + include/drm/drm_color_mgmt.h | 3 ++ + include/drm/drm_plane.h | 36 +++++++++++++++++++++++ + 5 files changed, 97 insertions(+) + +--- a/drivers/gpu/drm/drm_atomic_state_helper.c ++++ b/drivers/gpu/drm/drm_atomic_state_helper.c +@@ -267,6 +267,20 @@ void __drm_atomic_helper_plane_state_res + plane_state->color_range = val; + } + ++ if (plane->chroma_siting_h_property) { ++ if (!drm_object_property_get_default_value(&plane->base, ++ plane->chroma_siting_h_property, ++ &val)) ++ plane_state->chroma_siting_h = val; ++ } ++ ++ if (plane->chroma_siting_v_property) { ++ if (!drm_object_property_get_default_value(&plane->base, ++ plane->chroma_siting_v_property, ++ &val)) ++ plane_state->chroma_siting_v = val; ++ } ++ + if (plane->zpos_property) { + if (!drm_object_property_get_default_value(&plane->base, + plane->zpos_property, +--- a/drivers/gpu/drm/drm_atomic_uapi.c ++++ b/drivers/gpu/drm/drm_atomic_uapi.c +@@ -562,6 +562,10 @@ static int drm_atomic_plane_set_property + state->color_encoding = val; + } else if (property == plane->color_range_property) { + state->color_range = val; ++ } else if (property == plane->chroma_siting_h_property) { ++ state->chroma_siting_h = val; ++ } else if (property == plane->chroma_siting_v_property) { ++ state->chroma_siting_v = val; + } else if (property == config->prop_fb_damage_clips) { + ret = drm_atomic_replace_property_blob_from_id(dev, + &state->fb_damage_clips, +@@ -628,6 +632,10 @@ drm_atomic_plane_get_property(struct drm + *val = state->color_encoding; + } else if (property == plane->color_range_property) { + *val = state->color_range; ++ } else if (property == plane->chroma_siting_h_property) { ++ *val = state->chroma_siting_h; ++ } else if (property == plane->chroma_siting_v_property) { ++ *val = state->chroma_siting_v; + } else if (property == config->prop_fb_damage_clips) { + *val = (state->fb_damage_clips) ? + state->fb_damage_clips->base.id : 0; +--- a/drivers/gpu/drm/drm_color_mgmt.c ++++ b/drivers/gpu/drm/drm_color_mgmt.c +@@ -591,6 +591,42 @@ int drm_plane_create_color_properties(st + EXPORT_SYMBOL(drm_plane_create_color_properties); + + /** ++ * drm_plane_create_chroma_siting_properties - chroma siting related plane properties ++ * @plane: plane object ++ * ++ * Create and attach plane specific CHROMA_SITING ++ * properties to @plane. ++ */ ++int drm_plane_create_chroma_siting_properties(struct drm_plane *plane, ++ int32_t default_chroma_siting_h, ++ int32_t default_chroma_siting_v) ++{ ++ struct drm_device *dev = plane->dev; ++ struct drm_property *prop; ++ ++ prop = drm_property_create_range(dev, 0, "CHROMA_SITING_H", ++ 0, 1<<16); ++ if (!prop) ++ return -ENOMEM; ++ plane->chroma_siting_h_property = prop; ++ drm_object_attach_property(&plane->base, prop, default_chroma_siting_h); ++ ++ prop = drm_property_create_range(dev, 0, "CHROMA_SITING_V", ++ 0, 1<<16); ++ if (!prop) ++ return -ENOMEM; ++ plane->chroma_siting_v_property = prop; ++ drm_object_attach_property(&plane->base, prop, default_chroma_siting_v); ++ ++ if (plane->state) { ++ plane->state->chroma_siting_h = default_chroma_siting_h; ++ plane->state->chroma_siting_v = default_chroma_siting_v; ++ } ++ return 0; ++} ++EXPORT_SYMBOL(drm_plane_create_chroma_siting_properties); ++ ++/** + * drm_color_lut_check - check validity of lookup table + * @lut: property blob containing LUT to check + * @tests: bitmask of tests to run +--- a/include/drm/drm_color_mgmt.h ++++ b/include/drm/drm_color_mgmt.h +@@ -93,6 +93,9 @@ int drm_plane_create_color_properties(st + enum drm_color_encoding default_encoding, + enum drm_color_range default_range); + ++int drm_plane_create_chroma_siting_properties(struct drm_plane *plane, ++ int32_t default_chroma_siting_h, int32_t default_chroma_siting_v); ++ + /** + * enum drm_color_lut_tests - hw-specific LUT tests to perform + * +--- a/include/drm/drm_plane.h ++++ b/include/drm/drm_plane.h +@@ -178,6 +178,24 @@ struct drm_plane_state { + enum drm_color_range color_range; + + /** ++ * @chroma_siting_h: ++ * ++ * Location of chroma samples horizontally compared to luma ++ * 0 means chroma is sited with left luma ++ * 0x8000 is interstitial. 0x10000 is sited with right luma ++ */ ++ int32_t chroma_siting_h; ++ ++ /** ++ * @chroma_siting_v: ++ * ++ * Location of chroma samples vertically compared to luma ++ * 0 means chroma is sited with top luma ++ * 0x8000 is interstitial. 0x10000 is sited with bottom luma ++ */ ++ int32_t chroma_siting_v; ++ ++ /** + * @fb_damage_clips: + * + * Blob representing damage (area in plane framebuffer that changed +@@ -748,6 +766,24 @@ struct drm_plane { + * scaling. + */ + struct drm_property *scaling_filter_property; ++ ++ /** ++ * @chroma_siting_h_property: ++ * ++ * Optional "CHROMA_SITING_H" property for specifying ++ * chroma siting for YUV formats. ++ * See drm_plane_create_chroma_siting_properties(). ++ */ ++ struct drm_property *chroma_siting_h_property; ++ ++ /** ++ * @chroma_siting_v_property: ++ * ++ * Optional "CHROMA_SITING_V" property for specifying ++ * chroma siting for YUV formats. ++ * See drm_plane_create_chroma_siting_properties(). ++ */ ++ struct drm_property *chroma_siting_v_property; + }; + + #define obj_to_plane(x) container_of(x, struct drm_plane, base) diff --git a/target/linux/bcm27xx/patches-6.1/950-0043-vc4-drm-plane-Make-use-of-chroma-siting-parameter.patch b/target/linux/bcm27xx/patches-6.1/950-0043-vc4-drm-plane-Make-use-of-chroma-siting-parameter.patch new file mode 100644 index 0000000000..b5ebb28bbf --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0043-vc4-drm-plane-Make-use-of-chroma-siting-parameter.patch @@ -0,0 +1,60 @@ +From 2b8db0ad29be4c12f2a1c5a209e15e5e14efc047 Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Thu, 27 Jan 2022 15:32:04 +0000 +Subject: [PATCH] vc4/drm:plane: Make use of chroma siting parameter + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/vc4_plane.c | 13 +++++++++---- + 1 file changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -467,17 +467,18 @@ static void vc4_write_tpz(struct vc4_pla + /* phase magnitude bits */ + #define PHASE_BITS 6 + +-static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst, u32 xy, int channel) ++static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst, u32 xy, int channel, int chroma_offset) + { + u32 scale = src / dst; + s32 offset, offset2; + s32 phase; + + /* Start the phase at 1/2 pixel from the 1st pixel at src_x. +- 1/4 pixel for YUV. */ ++ 1/4 pixel for YUV, plus the offset for chroma siting */ + if (channel) { + /* the phase is relative to scale_src->x, so shift it for display list's x value */ + offset = (xy & 0x1ffff) >> (16 - PHASE_BITS) >> 1; ++ offset -= chroma_offset >> (17 - PHASE_BITS); + offset += -(1 << PHASE_BITS >> 2); + } else { + /* the phase is relative to scale_src->x, so shift it for display list's x value */ +@@ -563,13 +564,15 @@ static void vc4_write_scaling_parameters + /* Ch0 H-PPF Word 0: Scaling Parameters */ + if (vc4_state->x_scaling[channel] == VC4_SCALING_PPF) { + vc4_write_ppf(vc4_state, +- vc4_state->src_w[channel], vc4_state->crtc_w, vc4_state->src_x, channel); ++ vc4_state->src_w[channel], vc4_state->crtc_w, vc4_state->src_x, channel, ++ state->chroma_siting_h); + } + + /* Ch0 V-PPF Words 0-1: Scaling Parameters, Context */ + if (vc4_state->y_scaling[channel] == VC4_SCALING_PPF) { + vc4_write_ppf(vc4_state, +- vc4_state->src_h[channel], vc4_state->crtc_h, vc4_state->src_y, channel); ++ vc4_state->src_h[channel], vc4_state->crtc_h, vc4_state->src_y, channel, ++ state->chroma_siting_v); + vc4_dlist_write(vc4_state, 0xc0c0c0c0); + } + +@@ -1649,6 +1652,8 @@ struct drm_plane *vc4_plane_init(struct + DRM_COLOR_YCBCR_BT709, + DRM_COLOR_YCBCR_LIMITED_RANGE); + ++ drm_plane_create_chroma_siting_properties(plane, 0, 0); ++ + if (type == DRM_PLANE_TYPE_PRIMARY) + drm_plane_create_zpos_immutable_property(plane, 0); + diff --git a/target/linux/bcm27xx/patches-6.1/950-0044-drm-vc4-Force-trigger-of-dlist-update-on-margins-cha.patch b/target/linux/bcm27xx/patches-6.1/950-0044-drm-vc4-Force-trigger-of-dlist-update-on-margins-cha.patch new file mode 100644 index 0000000000..0820d27ba7 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0044-drm-vc4-Force-trigger-of-dlist-update-on-margins-cha.patch @@ -0,0 +1,58 @@ +From b583024119e8ea35f7a6d2d8b143c0eb390afa70 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 1 Apr 2022 11:31:38 +0100 +Subject: [PATCH] drm/vc4: Force trigger of dlist update on margins + change + +When the margins are changed, the dlist needs to be regenerated +with the changed updated dest regions for each of the planes. + +Setting the zpos_changed flag is sufficient to trigger that +without doing a full modeset, therefore set it should the +margins be changed. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_crtc.c | 14 ++++++++++---- + drivers/gpu/drm/vc4/vc4_drv.h | 7 +------ + 2 files changed, 11 insertions(+), 10 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_crtc.c ++++ b/drivers/gpu/drm/vc4/vc4_crtc.c +@@ -757,10 +757,16 @@ static int vc4_crtc_atomic_check(struct + if (conn_state->crtc != crtc) + continue; + +- vc4_state->margins.left = conn_state->tv.margins.left; +- vc4_state->margins.right = conn_state->tv.margins.right; +- vc4_state->margins.top = conn_state->tv.margins.top; +- vc4_state->margins.bottom = conn_state->tv.margins.bottom; ++ if (memcmp(&vc4_state->margins, &conn_state->tv.margins, ++ sizeof(vc4_state->margins))) { ++ memcpy(&vc4_state->margins, &conn_state->tv.margins, ++ sizeof(vc4_state->margins)); ++ ++ /* Need to force the dlist entries for all planes to be ++ * updated so that the dest rectangles are changed. ++ */ ++ crtc_state->zpos_changed = true; ++ } + break; + } + +--- a/drivers/gpu/drm/vc4/vc4_drv.h ++++ b/drivers/gpu/drm/vc4/vc4_drv.h +@@ -581,12 +581,7 @@ struct vc4_crtc_state { + bool txp_armed; + unsigned int assigned_channel; + +- struct { +- unsigned int left; +- unsigned int right; +- unsigned int top; +- unsigned int bottom; +- } margins; ++ struct drm_connector_tv_margins margins; + + unsigned long hvs_load; + diff --git a/target/linux/bcm27xx/patches-6.1/950-0045-drm-atomic-helpers-remove-legacy_cursor_update-hacks.patch b/target/linux/bcm27xx/patches-6.1/950-0045-drm-atomic-helpers-remove-legacy_cursor_update-hacks.patch new file mode 100644 index 0000000000..520d6fa7eb --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0045-drm-atomic-helpers-remove-legacy_cursor_update-hacks.patch @@ -0,0 +1,121 @@ +From 34b4470575bd300507847093497516f1adbc5020 Mon Sep 17 00:00:00 2001 +From: Daniel Vetter +Date: Fri, 23 Oct 2020 14:39:23 +0200 +Subject: [PATCH] drm/atomic-helpers: remove legacy_cursor_update hacks +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The stuff never really worked, and leads to lots of fun because it +out-of-order frees atomic states. Which upsets KASAN, among other +things. + +For async updates we now have a more solid solution with the +->atomic_async_check and ->atomic_async_commit hooks. Support for that +for msm and vc4 landed. nouveau and i915 have their own commit +routines, doing something similar. + +For everyone else it's probably better to remove the use-after-free +bug, and encourage folks to use the async support instead. The +affected drivers which register a legacy cursor plane and don't either +use the new async stuff or their own commit routine are: amdgpu, +atmel, mediatek, qxl, rockchip, sti, sun4i, tegra, virtio, and vmwgfx. + +Inspired by an amdgpu bug report. + +v2: Drop RFC, I think with amdgpu converted over to use +atomic_async_check/commit done in + +commit 674e78acae0dfb4beb56132e41cbae5b60f7d662 +Author: Nicholas Kazlauskas +Date: Wed Dec 5 14:59:07 2018 -0500 + + drm/amd/display: Add fast path for cursor plane updates + +we don't have any driver anymore where we have userspace expecting +solid legacy cursor support _and_ they are using the atomic helpers in +their fully glory. So we can retire this. + +v3: Paper over msm and i915 regression. The complete_all is the only +thing missing afaict. + +v4: Rebased on recent kernel, added extra link for vc4 bug. + +Link: https://bugzilla.kernel.org/show_bug.cgi?id=199425 +Link: https://lore.kernel.org/all/20220221134155.125447-9-maxime@cerno.tech/ +Cc: mikita.lipski@amd.com +Cc: Michel Dänzer +Cc: harry.wentland@amd.com +Cc: Rob Clark +Cc: "Kazlauskas, Nicholas" +Tested-by: Maxime Ripard +Signed-off-by: Daniel Vetter +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/drm_atomic_helper.c | 13 ------------- + drivers/gpu/drm/i915/display/intel_display.c | 13 +++++++++++++ + drivers/gpu/drm/msm/msm_atomic.c | 2 ++ + 3 files changed, 15 insertions(+), 13 deletions(-) + +--- a/drivers/gpu/drm/drm_atomic_helper.c ++++ b/drivers/gpu/drm/drm_atomic_helper.c +@@ -1608,13 +1608,6 @@ drm_atomic_helper_wait_for_vblanks(struc + int i, ret; + unsigned int crtc_mask = 0; + +- /* +- * Legacy cursor ioctls are completely unsynced, and userspace +- * relies on that (by doing tons of cursor updates). +- */ +- if (old_state->legacy_cursor_update) +- return; +- + for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) { + if (!new_crtc_state->active) + continue; +@@ -2264,12 +2257,6 @@ int drm_atomic_helper_setup_commit(struc + complete_all(&commit->flip_done); + continue; + } +- +- /* Legacy cursor updates are fully unsynced. */ +- if (state->legacy_cursor_update) { +- complete_all(&commit->flip_done); +- continue; +- } + + if (!new_crtc_state->event) { + commit->event = kzalloc(sizeof(*commit->event), +--- a/drivers/gpu/drm/i915/display/intel_display.c ++++ b/drivers/gpu/drm/i915/display/intel_display.c +@@ -7766,6 +7766,19 @@ static int intel_atomic_commit(struct dr + state->base.legacy_cursor_update = false; + } + ++ /* ++ * FIXME: Cut over to (async) commit helpers instead of hand-rolling ++ * everything. ++ */ ++ if (state->base.legacy_cursor_update) { ++ struct intel_crtc_state *new_crtc_state; ++ struct intel_crtc *crtc; ++ int i; ++ ++ for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) ++ complete_all(&new_crtc_state->uapi.commit->flip_done); ++ } ++ + ret = intel_atomic_prepare_commit(state); + if (ret) { + drm_dbg_atomic(&dev_priv->drm, +--- a/drivers/gpu/drm/msm/msm_atomic.c ++++ b/drivers/gpu/drm/msm/msm_atomic.c +@@ -222,6 +222,8 @@ void msm_atomic_commit_tail(struct drm_a + /* async updates are limited to single-crtc updates: */ + WARN_ON(crtc_mask != drm_crtc_mask(async_crtc)); + ++ complete_all(&async_crtc->state->commit->flip_done); ++ + /* + * Start timer if we don't already have an update pending + * on this crtc: diff --git a/target/linux/bcm27xx/patches-6.1/950-0046-drm-vc4_hdmi-Force-a-modeset-when-Broadcast-RGB-sett.patch b/target/linux/bcm27xx/patches-6.1/950-0046-drm-vc4_hdmi-Force-a-modeset-when-Broadcast-RGB-sett.patch new file mode 100644 index 0000000000..42301da88f --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0046-drm-vc4_hdmi-Force-a-modeset-when-Broadcast-RGB-sett.patch @@ -0,0 +1,33 @@ +From bf53b44573db760e243ef2fdf542bc3e991c97a6 Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Thu, 5 May 2022 18:50:04 +0100 +Subject: [PATCH] drm/vc4_hdmi: Force a modeset when Broadcast RGB + setting changes + +Without this the change is not visible until the next modeset + +Signed-off-by: Dom Cobley +--- + drivers/gpu/drm/vc4/vc4_hdmi.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hdmi.c ++++ b/drivers/gpu/drm/vc4/vc4_hdmi.c +@@ -536,14 +536,17 @@ static int vc4_hdmi_connector_atomic_che + { + struct drm_connector_state *old_state = + drm_atomic_get_old_connector_state(state, connector); ++ struct vc4_hdmi_connector_state *old_vc4_state = conn_state_to_vc4_hdmi_conn_state(old_state); + struct drm_connector_state *new_state = + drm_atomic_get_new_connector_state(state, connector); ++ struct vc4_hdmi_connector_state *new_vc4_state = conn_state_to_vc4_hdmi_conn_state(new_state); + struct drm_crtc *crtc = new_state->crtc; + + if (!crtc) + return 0; + + if (old_state->colorspace != new_state->colorspace || ++ old_vc4_state->broadcast_rgb != new_vc4_state->broadcast_rgb || + !drm_connector_atomic_hdr_metadata_equal(old_state, new_state)) { + struct drm_crtc_state *crtc_state; + diff --git a/target/linux/bcm27xx/patches-6.1/950-0047-drm-atomic-If-margins-are-updated-update-all-planes.patch b/target/linux/bcm27xx/patches-6.1/950-0047-drm-atomic-If-margins-are-updated-update-all-planes.patch new file mode 100644 index 0000000000..671f651538 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0047-drm-atomic-If-margins-are-updated-update-all-planes.patch @@ -0,0 +1,60 @@ +From 62813ba7cbf8c2df7af04036a297175fc0457626 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 1 Apr 2022 17:10:37 +0100 +Subject: [PATCH] drm/atomic: If margins are updated, update all + planes. + +Margins may be implemented by scaling the planes, but as there +is no way of intercepting the set_property for a standard property, +and all planes are checked in drm_atomic_check_only before the +connectors, there's now way to add the planes into the state +from the driver. + +If the margin properties change, add all corresponding planes to +the state. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/drm_atomic_uapi.c | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/drivers/gpu/drm/drm_atomic_uapi.c ++++ b/drivers/gpu/drm/drm_atomic_uapi.c +@@ -679,6 +679,7 @@ static int drm_atomic_connector_set_prop + { + struct drm_device *dev = connector->dev; + struct drm_mode_config *config = &dev->mode_config; ++ bool margins_updated = false; + bool replaced = false; + int ret; + +@@ -698,12 +699,16 @@ static int drm_atomic_connector_set_prop + state->tv.subconnector = val; + } else if (property == config->tv_left_margin_property) { + state->tv.margins.left = val; ++ margins_updated = true; + } else if (property == config->tv_right_margin_property) { + state->tv.margins.right = val; ++ margins_updated = true; + } else if (property == config->tv_top_margin_property) { + state->tv.margins.top = val; ++ margins_updated = true; + } else if (property == config->tv_bottom_margin_property) { + state->tv.margins.bottom = val; ++ margins_updated = true; + } else if (property == config->tv_mode_property) { + state->tv.mode = val; + } else if (property == config->tv_brightness_property) { +@@ -784,6 +789,12 @@ static int drm_atomic_connector_set_prop + return -EINVAL; + } + ++ if (margins_updated && state->crtc) { ++ ret = drm_atomic_add_affected_planes(state->state, state->crtc); ++ ++ return ret; ++ } ++ + return 0; + } + diff --git a/target/linux/bcm27xx/patches-6.1/950-0048-drm-vc4-hvs-Ignore-atomic_flush-if-we-re-disabled.patch b/target/linux/bcm27xx/patches-6.1/950-0048-drm-vc4-hvs-Ignore-atomic_flush-if-we-re-disabled.patch new file mode 100644 index 0000000000..4ddda92e16 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0048-drm-vc4-hvs-Ignore-atomic_flush-if-we-re-disabled.patch @@ -0,0 +1,27 @@ +From 2f38c1f89175b33aaa091d055a804f4f31c47ec2 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 6 Dec 2021 16:32:10 +0100 +Subject: [PATCH] drm/vc4: hvs: Ignore atomic_flush if we're disabled + +atomic_flush will be called for each CRTC even if they aren't enabled. + +The whole code we have there will thus run without a properly affected +channel, which can then result in all sorts of weird behaviour. + +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -778,6 +778,9 @@ void vc4_hvs_atomic_flush(struct drm_crt + return; + } + ++ if (vc4_state->assigned_channel == VC4_HVS_CHANNEL_DISABLED) ++ return; ++ + if (debug_dump_regs) { + DRM_INFO("CRTC %d HVS before:\n", drm_crtc_index(crtc)); + vc4_hvs_dump_state(hvs); diff --git a/target/linux/bcm27xx/patches-6.1/950-0049-drm-vc4-0-is-a-valid-value-for-pixel_order_hvs5-so-f.patch b/target/linux/bcm27xx/patches-6.1/950-0049-drm-vc4-0-is-a-valid-value-for-pixel_order_hvs5-so-f.patch new file mode 100644 index 0000000000..ebc9ce44ec --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0049-drm-vc4-0-is-a-valid-value-for-pixel_order_hvs5-so-f.patch @@ -0,0 +1,118 @@ +From b16dcc5f735739444da66149b473bb88fb44d4d9 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 3 Jun 2022 16:49:09 +0100 +Subject: [PATCH] drm: vc4: 0 is a valid value for pixel_order_hvs5, so + fix conditionals + +vc4_plane_mode_set for HVS5 was using pixel_order unless pixel_order_hvs5 +was non-zero, except 0 is a valid value for the pixel_order. + +Specify pixel_order_hvs5 for all formats and remove the conditional. + +Reported-by: vrazzer +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_plane.c | 20 ++++++++++++++------ + 1 file changed, 14 insertions(+), 6 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -65,11 +65,13 @@ static const struct hvs_format { + .drm = DRM_FORMAT_RGB565, + .hvs = HVS_PIXEL_FORMAT_RGB565, + .pixel_order = HVS_PIXEL_ORDER_XRGB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XRGB, + }, + { + .drm = DRM_FORMAT_BGR565, + .hvs = HVS_PIXEL_FORMAT_RGB565, + .pixel_order = HVS_PIXEL_ORDER_XBGR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XBGR, + }, + { + .drm = DRM_FORMAT_ARGB1555, +@@ -87,56 +89,67 @@ static const struct hvs_format { + .drm = DRM_FORMAT_RGB888, + .hvs = HVS_PIXEL_FORMAT_RGB888, + .pixel_order = HVS_PIXEL_ORDER_XRGB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XRGB, + }, + { + .drm = DRM_FORMAT_BGR888, + .hvs = HVS_PIXEL_FORMAT_RGB888, + .pixel_order = HVS_PIXEL_ORDER_XBGR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XBGR, + }, + { + .drm = DRM_FORMAT_YUV422, + .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE, + .pixel_order = HVS_PIXEL_ORDER_XYCBCR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCBCR, + }, + { + .drm = DRM_FORMAT_YVU422, + .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE, + .pixel_order = HVS_PIXEL_ORDER_XYCRCB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCRCB, + }, + { + .drm = DRM_FORMAT_YUV420, + .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE, + .pixel_order = HVS_PIXEL_ORDER_XYCBCR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCBCR, + }, + { + .drm = DRM_FORMAT_YVU420, + .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE, + .pixel_order = HVS_PIXEL_ORDER_XYCRCB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCRCB, + }, + { + .drm = DRM_FORMAT_NV12, + .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE, + .pixel_order = HVS_PIXEL_ORDER_XYCBCR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCBCR, + }, + { + .drm = DRM_FORMAT_NV21, + .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE, + .pixel_order = HVS_PIXEL_ORDER_XYCRCB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCRCB, + }, + { + .drm = DRM_FORMAT_NV16, + .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE, + .pixel_order = HVS_PIXEL_ORDER_XYCBCR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCBCR, + }, + { + .drm = DRM_FORMAT_NV61, + .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE, + .pixel_order = HVS_PIXEL_ORDER_XYCRCB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCRCB, + }, + { + .drm = DRM_FORMAT_P030, + .hvs = HVS_PIXEL_FORMAT_YCBCR_10BIT, + .pixel_order = HVS_PIXEL_ORDER_XYCBCR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCBCR, + .hvs5_only = true, + }, + { +@@ -1087,15 +1100,10 @@ static int vc4_plane_mode_set(struct drm + vc4_dlist_write(vc4_state, 0xc0c0c0c0); + + } else { +- u32 hvs_pixel_order = format->pixel_order; +- +- if (format->pixel_order_hvs5) +- hvs_pixel_order = format->pixel_order_hvs5; +- + /* Control word */ + vc4_dlist_write(vc4_state, + SCALER_CTL0_VALID | +- (hvs_pixel_order << SCALER_CTL0_ORDER_SHIFT) | ++ (format->pixel_order_hvs5 << SCALER_CTL0_ORDER_SHIFT) | + (hvs_format << SCALER_CTL0_PIXEL_FORMAT_SHIFT) | + VC4_SET_FIELD(tiling, SCALER_CTL0_TILING) | + (vc4_state->is_unity ? diff --git a/target/linux/bcm27xx/patches-6.1/950-0050-drm-vc4-Omit-pixel_order-from-the-hvs_format-for-hvs.patch b/target/linux/bcm27xx/patches-6.1/950-0050-drm-vc4-Omit-pixel_order-from-the-hvs_format-for-hvs.patch new file mode 100644 index 0000000000..e59ab2cf83 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0050-drm-vc4-Omit-pixel_order-from-the-hvs_format-for-hvs.patch @@ -0,0 +1,54 @@ +From e229805297bd5ff53b5fc63d08c5f37c2404c2d6 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 6 Jun 2022 12:23:28 +0100 +Subject: [PATCH] drm: vc4: Omit pixel_order from the hvs_format for + hvs5 only formats + +pixel_order is used for the earlier versions of the HVS, so is +redundant on the 10:10:10:2 and 10bit YUV formats that are only +supported on HVS5. +Remove the assignment from the table to avoid confusion. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_plane.c | 5 ----- + 1 file changed, 5 deletions(-) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -148,35 +148,30 @@ static const struct hvs_format { + { + .drm = DRM_FORMAT_P030, + .hvs = HVS_PIXEL_FORMAT_YCBCR_10BIT, +- .pixel_order = HVS_PIXEL_ORDER_XYCBCR, + .pixel_order_hvs5 = HVS_PIXEL_ORDER_XYCBCR, + .hvs5_only = true, + }, + { + .drm = DRM_FORMAT_XRGB2101010, + .hvs = HVS_PIXEL_FORMAT_RGBA1010102, +- .pixel_order = HVS_PIXEL_ORDER_ABGR, + .pixel_order_hvs5 = HVS_PIXEL_ORDER_ARGB, + .hvs5_only = true, + }, + { + .drm = DRM_FORMAT_ARGB2101010, + .hvs = HVS_PIXEL_FORMAT_RGBA1010102, +- .pixel_order = HVS_PIXEL_ORDER_ABGR, + .pixel_order_hvs5 = HVS_PIXEL_ORDER_ARGB, + .hvs5_only = true, + }, + { + .drm = DRM_FORMAT_ABGR2101010, + .hvs = HVS_PIXEL_FORMAT_RGBA1010102, +- .pixel_order = HVS_PIXEL_ORDER_ARGB, + .pixel_order_hvs5 = HVS_PIXEL_ORDER_ABGR, + .hvs5_only = true, + }, + { + .drm = DRM_FORMAT_XBGR2101010, + .hvs = HVS_PIXEL_FORMAT_RGBA1010102, +- .pixel_order = HVS_PIXEL_ORDER_ARGB, + .pixel_order_hvs5 = HVS_PIXEL_ORDER_ABGR, + .hvs5_only = true, + }, diff --git a/target/linux/bcm27xx/patches-6.1/950-0051-drm-vc4-Add-3-3-2-and-4-4-4-4-RGB-RGBX-RGBA-formats.patch b/target/linux/bcm27xx/patches-6.1/950-0051-drm-vc4-Add-3-3-2-and-4-4-4-4-RGB-RGBX-RGBA-formats.patch new file mode 100644 index 0000000000..c4e0050589 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0051-drm-vc4-Add-3-3-2-and-4-4-4-4-RGB-RGBX-RGBA-formats.patch @@ -0,0 +1,104 @@ +From db4cb2248e9d98cc513300964c3ecdc80b8bc364 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 3 Jun 2022 16:57:04 +0100 +Subject: [PATCH] drm: vc4: Add 3:3:2 and 4:4:4:4 RGB/RGBX/RGBA formats + +The hardware supports the 332 8bpp and 4:4:4:4 16bpp formats, +but the table of supported formats didn't include them. +Add them in. + +In theory they are supported for T-format as well as linear, +but without a way to test them just add them as linear for now. + +Suggested-by: vrazzer +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_plane.c | 70 +++++++++++++++++++++++++++++++++ + 1 file changed, 70 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_plane.c ++++ b/drivers/gpu/drm/vc4/vc4_plane.c +@@ -175,6 +175,66 @@ static const struct hvs_format { + .pixel_order_hvs5 = HVS_PIXEL_ORDER_ABGR, + .hvs5_only = true, + }, ++ { ++ .drm = DRM_FORMAT_RGB332, ++ .hvs = HVS_PIXEL_FORMAT_RGB332, ++ .pixel_order = HVS_PIXEL_ORDER_ARGB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ARGB, ++ }, ++ { ++ .drm = DRM_FORMAT_BGR233, ++ .hvs = HVS_PIXEL_FORMAT_RGB332, ++ .pixel_order = HVS_PIXEL_ORDER_ABGR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ABGR, ++ }, ++ { ++ .drm = DRM_FORMAT_XRGB4444, ++ .hvs = HVS_PIXEL_FORMAT_RGBA4444, ++ .pixel_order = HVS_PIXEL_ORDER_ABGR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ARGB, ++ }, ++ { ++ .drm = DRM_FORMAT_ARGB4444, ++ .hvs = HVS_PIXEL_FORMAT_RGBA4444, ++ .pixel_order = HVS_PIXEL_ORDER_ABGR, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ARGB, ++ }, ++ { ++ .drm = DRM_FORMAT_XBGR4444, ++ .hvs = HVS_PIXEL_FORMAT_RGBA4444, ++ .pixel_order = HVS_PIXEL_ORDER_ARGB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ABGR, ++ }, ++ { ++ .drm = DRM_FORMAT_ABGR4444, ++ .hvs = HVS_PIXEL_FORMAT_RGBA4444, ++ .pixel_order = HVS_PIXEL_ORDER_ARGB, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_ABGR, ++ }, ++ { ++ .drm = DRM_FORMAT_BGRX4444, ++ .hvs = HVS_PIXEL_FORMAT_RGBA4444, ++ .pixel_order = HVS_PIXEL_ORDER_RGBA, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_BGRA, ++ }, ++ { ++ .drm = DRM_FORMAT_BGRA4444, ++ .hvs = HVS_PIXEL_FORMAT_RGBA4444, ++ .pixel_order = HVS_PIXEL_ORDER_RGBA, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_BGRA, ++ }, ++ { ++ .drm = DRM_FORMAT_RGBX4444, ++ .hvs = HVS_PIXEL_FORMAT_RGBA4444, ++ .pixel_order = HVS_PIXEL_ORDER_BGRA, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_RGBA, ++ }, ++ { ++ .drm = DRM_FORMAT_RGBA4444, ++ .hvs = HVS_PIXEL_FORMAT_RGBA4444, ++ .pixel_order = HVS_PIXEL_ORDER_BGRA, ++ .pixel_order_hvs5 = HVS_PIXEL_ORDER_RGBA, ++ }, + }; + + static const struct hvs_format *vc4_get_hvs_format(u32 drm_format) +@@ -1575,6 +1635,16 @@ static bool vc4_format_mod_supported(str + case DRM_FORMAT_BGRX1010102: + case DRM_FORMAT_RGBA1010102: + case DRM_FORMAT_BGRA1010102: ++ case DRM_FORMAT_XRGB4444: ++ case DRM_FORMAT_ARGB4444: ++ case DRM_FORMAT_XBGR4444: ++ case DRM_FORMAT_ABGR4444: ++ case DRM_FORMAT_RGBX4444: ++ case DRM_FORMAT_RGBA4444: ++ case DRM_FORMAT_BGRX4444: ++ case DRM_FORMAT_BGRA4444: ++ case DRM_FORMAT_RGB332: ++ case DRM_FORMAT_BGR233: + case DRM_FORMAT_YUV422: + case DRM_FORMAT_YVU422: + case DRM_FORMAT_YUV420: diff --git a/target/linux/bcm27xx/patches-6.1/950-0052-drm-vc4-Add-comments-for-which-HVS_PIXEL_ORDER_xxx-d.patch b/target/linux/bcm27xx/patches-6.1/950-0052-drm-vc4-Add-comments-for-which-HVS_PIXEL_ORDER_xxx-d.patch new file mode 100644 index 0000000000..83f1fdca90 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0052-drm-vc4-Add-comments-for-which-HVS_PIXEL_ORDER_xxx-d.patch @@ -0,0 +1,36 @@ +From 30f0c2f0da952655da949c2af36bf53138092ba5 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 6 Jun 2022 14:53:56 +0100 +Subject: [PATCH] drm: vc4: Add comments for which HVS_PIXEL_ORDER_xxx + defines apply + +The HVS_PIXEL_ORDER_xxx defines apply to specific HVS_PIXEL_FORMAT_xxx +modes, so add comments to make this obvious. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_regs.h | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_regs.h ++++ b/drivers/gpu/drm/vc4/vc4_regs.h +@@ -870,16 +870,19 @@ enum hvs_pixel_format { + /* Note: the LSB is the rightmost character shown. Only valid for + * HVS_PIXEL_FORMAT_RGB8888, not RGB888. + */ ++/* For modes 332, 4444, 555, 5551, 6666, 8888, 10:10:10:2 */ + #define HVS_PIXEL_ORDER_RGBA 0 + #define HVS_PIXEL_ORDER_BGRA 1 + #define HVS_PIXEL_ORDER_ARGB 2 + #define HVS_PIXEL_ORDER_ABGR 3 + ++/* For modes 666 and 888 (4 & 5) */ + #define HVS_PIXEL_ORDER_XBRG 0 + #define HVS_PIXEL_ORDER_XRBG 1 + #define HVS_PIXEL_ORDER_XRGB 2 + #define HVS_PIXEL_ORDER_XBGR 3 + ++/* For YCbCr modes (8-12, and 17) */ + #define HVS_PIXEL_ORDER_XYCBCR 0 + #define HVS_PIXEL_ORDER_XYCRCB 1 + #define HVS_PIXEL_ORDER_YXCBCR 2 diff --git a/target/linux/bcm27xx/patches-6.1/950-0053-drm-vc4-Add-async-update-support-for-cursor-planes.patch b/target/linux/bcm27xx/patches-6.1/950-0053-drm-vc4-Add-async-update-support-for-cursor-planes.patch new file mode 100644 index 0000000000..24e46f87e7 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0053-drm-vc4-Add-async-update-support-for-cursor-planes.patch @@ -0,0 +1,87 @@ +From e6f7f8f83e736bb94b146781b149810853b2bff3 Mon Sep 17 00:00:00 2001 +From: Phil Elwell <8911409+pelwell@users.noreply.github.com> +Date: Wed, 24 Aug 2022 11:14:40 +0100 +Subject: [PATCH] drm/vc4: Add async update support for cursor planes + +Now that cursors are implemented as regular planes, all cursor +movements result in atomic updates. As the firmware-kms driver +doesn't support asynchronous updates, these are synchronous, which +limits the update rate to the screen refresh rate. Xorg seems unaware +of this (or at least of the effect of this), because if the mouse is +configured with a higher update rate than the screen then continuous +mouse movement results in an increasing backlog of mouse events - +cue extreme lag. + +Add minimal support for asynchronous updates - limited to cursor +planes - to eliminate the lag. + +See: https://github.com/raspberrypi/linux/pull/4971 + https://github.com/raspberrypi/linux/issues/4988 + +Signed-off-by: Phil Elwell +--- + drivers/gpu/drm/vc4/vc4_firmware_kms.c | 46 ++++++++++++++++++++++++++ + 1 file changed, 46 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c ++++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c +@@ -675,6 +675,50 @@ static int vc4_plane_atomic_check(struct + return vc4_plane_to_mb(plane, &vc4_plane->mb, new_plane_state); + } + ++static void vc4_plane_atomic_async_update(struct drm_plane *plane, ++ struct drm_atomic_state *state) ++{ ++ struct drm_plane_state *new_plane_state = ++ drm_atomic_get_new_plane_state(state, plane); ++ ++ swap(plane->state->fb, new_plane_state->fb); ++ plane->state->crtc_x = new_plane_state->crtc_x; ++ plane->state->crtc_y = new_plane_state->crtc_y; ++ plane->state->crtc_w = new_plane_state->crtc_w; ++ plane->state->crtc_h = new_plane_state->crtc_h; ++ plane->state->src_x = new_plane_state->src_x; ++ plane->state->src_y = new_plane_state->src_y; ++ plane->state->src_w = new_plane_state->src_w; ++ plane->state->src_h = new_plane_state->src_h; ++ plane->state->alpha = new_plane_state->alpha; ++ plane->state->pixel_blend_mode = new_plane_state->pixel_blend_mode; ++ plane->state->rotation = new_plane_state->rotation; ++ plane->state->zpos = new_plane_state->zpos; ++ plane->state->normalized_zpos = new_plane_state->normalized_zpos; ++ plane->state->color_encoding = new_plane_state->color_encoding; ++ plane->state->color_range = new_plane_state->color_range; ++ plane->state->src = new_plane_state->src; ++ plane->state->dst = new_plane_state->dst; ++ plane->state->visible = new_plane_state->visible; ++ ++ vc4_plane_set_blank(plane, false); ++} ++ ++static int vc4_plane_atomic_async_check(struct drm_plane *plane, ++ struct drm_atomic_state *state) ++{ ++ struct drm_plane_state *new_plane_state = ++ drm_atomic_get_new_plane_state(state, plane); ++ int ret = -EINVAL; ++ ++ if (plane->type == 2 && ++ plane->state->fb && ++ new_plane_state->crtc->state->active) ++ ret = 0; ++ ++ return ret; ++} ++ + /* Called during init to allocate the plane's atomic state. */ + static void vc4_plane_reset(struct drm_plane *plane) + { +@@ -769,6 +813,8 @@ static const struct drm_plane_helper_fun + .atomic_check = vc4_plane_atomic_check, + .atomic_update = vc4_plane_atomic_update, + .atomic_disable = vc4_plane_atomic_disable, ++ .atomic_async_check = vc4_plane_atomic_async_check, ++ .atomic_async_update = vc4_plane_atomic_async_update, + }; + + static struct drm_plane *vc4_fkms_plane_init(struct drm_device *dev, diff --git a/target/linux/bcm27xx/patches-6.1/950-0054-drm-vc4-Configure-the-HVS-COB-allocations.patch b/target/linux/bcm27xx/patches-6.1/950-0054-drm-vc4-Configure-the-HVS-COB-allocations.patch new file mode 100644 index 0000000000..41d2d00dc5 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0054-drm-vc4-Configure-the-HVS-COB-allocations.patch @@ -0,0 +1,96 @@ +From 4477b8c71c8b3b5aa8bd15f9993f48d02d178fc5 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 11 Aug 2022 13:49:16 +0100 +Subject: [PATCH] drm/vc4: Configure the HVS COB allocations + +The HVS Composite Output Buffer (COB) is the memory used to +generate the output pixel data. +Until now the vc4 driver has been relying on the firmware to +have set these to sensible values. + +In testing triple screen support it has been noted that only +1 line was being assigned to HVS channel 2. Whilst that is fine +for the transposer (TXP), and indeed needed as only some pixels +have an alpha channel, it is insufficient to run a live display. + +Split the COB more evenly between the 3 HVS channels. + +Signed-off-by: Dave Stevenson + +Revert vc4_regs change +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 56 ++++++++++++++++++++++++++++++++++- + 1 file changed, 55 insertions(+), 1 deletion(-) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -1013,7 +1013,7 @@ static int vc4_hvs_bind(struct device *d + struct vc4_hvs *hvs = NULL; + int ret; + u32 dispctrl; +- u32 reg; ++ u32 reg, top; + + hvs = drmm_kzalloc(drm, sizeof(*hvs), GFP_KERNEL); + if (!hvs) +@@ -1151,6 +1151,60 @@ static int vc4_hvs_bind(struct device *d + + HVS_WRITE(SCALER_DISPCTRL, dispctrl); + ++ /* Recompute Composite Output Buffer (COB) allocations for the displays ++ */ ++ if (!vc4->is_vc5) { ++ /* The COB is 20736 pixels, or just over 10 lines at 2048 wide. ++ * The bottom 2048 pixels are full 32bpp RGBA (intended for the ++ * TXP composing RGBA to memory), whilst the remainder are only ++ * 24bpp RGB. ++ * ++ * Assign 3 lines to channels 1 & 2, and just over 4 lines to ++ * channel 0. ++ */ ++ #define VC4_COB_SIZE 20736 ++ #define VC4_COB_LINE_WIDTH 2048 ++ #define VC4_COB_NUM_LINES 3 ++ reg = 0; ++ top = VC4_COB_LINE_WIDTH * VC4_COB_NUM_LINES; ++ reg |= (top - 1) << 16; ++ HVS_WRITE(SCALER_DISPBASE2, reg); ++ reg = top; ++ top += VC4_COB_LINE_WIDTH * VC4_COB_NUM_LINES; ++ reg |= (top - 1) << 16; ++ HVS_WRITE(SCALER_DISPBASE1, reg); ++ reg = top; ++ top = VC4_COB_SIZE; ++ reg |= (top - 1) << 16; ++ HVS_WRITE(SCALER_DISPBASE0, reg); ++ } else { ++ /* The COB is 44416 pixels, or 10.8 lines at 4096 wide. ++ * The bottom 4096 pixels are full RGBA (intended for the TXP ++ * composing RGBA to memory), whilst the remainder are only ++ * RGB. Addressing is always pixel wide. ++ * ++ * Assign 3 lines of 4096 to channels 1 & 2, and just over 4 ++ * lines. to channel 0. ++ */ ++ #define VC5_COB_SIZE 44416 ++ #define VC5_COB_LINE_WIDTH 4096 ++ #define VC5_COB_NUM_LINES 3 ++ reg = 0; ++ top = VC5_COB_LINE_WIDTH * VC5_COB_NUM_LINES; ++ reg |= top << 16; ++ HVS_WRITE(SCALER_DISPBASE2, reg); ++ top += 16; ++ reg = top; ++ top += VC5_COB_LINE_WIDTH * VC5_COB_NUM_LINES; ++ reg |= top << 16; ++ HVS_WRITE(SCALER_DISPBASE1, reg); ++ top += 16; ++ reg = top; ++ top = VC5_COB_SIZE; ++ reg |= top << 16; ++ HVS_WRITE(SCALER_DISPBASE0, reg); ++ } ++ + ret = devm_request_irq(dev, platform_get_irq(pdev, 0), + vc4_hvs_irq_handler, 0, "vc4 hvs", drm); + if (ret) diff --git a/target/linux/bcm27xx/patches-6.1/950-0055-drm-vc4-Set-AXI-panic-modes-for-the-HVS.patch b/target/linux/bcm27xx/patches-6.1/950-0055-drm-vc4-Set-AXI-panic-modes-for-the-HVS.patch new file mode 100644 index 0000000000..40465b0373 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0055-drm-vc4-Set-AXI-panic-modes-for-the-HVS.patch @@ -0,0 +1,39 @@ +From b6b9915ad0b9c70c3b7edc45dfca2fdcfd4ba5cb Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Thu, 11 Aug 2022 13:59:34 +0100 +Subject: [PATCH] drm/vc4: Set AXI panic modes for the HVS + +The HVS can change AXI request mode based on how full the COB +FIFOs are. +Until now the vc4 driver has been relying on the firmware to +have set these to sensible values. + +With HVS channel 2 now being used for live video, change the +panic mode for all channels to be explicitly set by the driver, +and the same for all channels. + +Signed-off-by: Dave Stevenson +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -1149,6 +1149,17 @@ static int vc4_hvs_bind(struct device *d + dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1); + dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2); + ++ /* Set AXI panic mode. ++ * VC4 panics when < 2 lines in FIFO. ++ * VC5 panics when less than 1 line in the FIFO. ++ */ ++ dispctrl &= ~(SCALER_DISPCTRL_PANIC0_MASK | ++ SCALER_DISPCTRL_PANIC1_MASK | ++ SCALER_DISPCTRL_PANIC2_MASK); ++ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC0); ++ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1); ++ dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2); ++ + HVS_WRITE(SCALER_DISPCTRL, dispctrl); + + /* Recompute Composite Output Buffer (COB) allocations for the displays diff --git a/target/linux/bcm27xx/patches-6.1/950-0056-drm-vc4-hvs-Skip-DebugFS-Registration-for-FKMS.patch b/target/linux/bcm27xx/patches-6.1/950-0056-drm-vc4-hvs-Skip-DebugFS-Registration-for-FKMS.patch new file mode 100644 index 0000000000..d40d5a7b25 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0056-drm-vc4-hvs-Skip-DebugFS-Registration-for-FKMS.patch @@ -0,0 +1,25 @@ +From 6674a753e11c7c623926a8fed128a9ed86530e5c Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 11 Jul 2022 10:38:25 +0200 +Subject: [PATCH] drm/vc4: hvs: Skip DebugFS Registration for FKMS + +FKMS doesn't have an HVS and it's expected. Return from the debugfs init +function immediately if we're running with fkms. + +Signed-off-by: Maxime Ripard +--- + drivers/gpu/drm/vc4/vc4_hvs.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/gpu/drm/vc4/vc4_hvs.c ++++ b/drivers/gpu/drm/vc4/vc4_hvs.c +@@ -975,6 +975,9 @@ int vc4_hvs_debugfs_init(struct drm_mino + struct vc4_hvs *hvs = vc4->hvs; + int ret; + ++ if (vc4->firmware_kms) ++ return 0; ++ + if (!vc4->hvs) + return -ENODEV; + diff --git a/target/linux/bcm27xx/patches-6.1/950-0057-media-uapi-Add-some-RGB-bus-formats-for-VC4-DPI-outp.patch b/target/linux/bcm27xx/patches-6.1/950-0057-media-uapi-Add-some-RGB-bus-formats-for-VC4-DPI-outp.patch new file mode 100644 index 0000000000..2979aede23 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0057-media-uapi-Add-some-RGB-bus-formats-for-VC4-DPI-outp.patch @@ -0,0 +1,40 @@ +From 8400889a0f241a12353673c35087bf6c38ea09e9 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 15 Aug 2022 13:34:02 +0200 +Subject: [PATCH] media: uapi: Add some RGB bus formats for VC4 DPI + output + +The VC4 DPI controller can output more RGB formats that aren't described +through a media bus format yet, so let's add them. + +Signed-off-by: Maxime Ripard +--- + include/uapi/linux/media-bus-format.h | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/include/uapi/linux/media-bus-format.h ++++ b/include/uapi/linux/media-bus-format.h +@@ -34,19 +34,22 @@ + + #define MEDIA_BUS_FMT_FIXED 0x0001 + +-/* RGB - next is 0x1022 */ ++/* RGB - next is 0x1025 */ + #define MEDIA_BUS_FMT_RGB444_1X12 0x1016 + #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE 0x1001 + #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE 0x1002 + #define MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE 0x1003 + #define MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE 0x1004 + #define MEDIA_BUS_FMT_RGB565_1X16 0x1017 ++#define MEDIA_BUS_FMT_RGB565_1X24_CPADHI 0x1022 + #define MEDIA_BUS_FMT_BGR565_2X8_BE 0x1005 + #define MEDIA_BUS_FMT_BGR565_2X8_LE 0x1006 + #define MEDIA_BUS_FMT_RGB565_2X8_BE 0x1007 + #define MEDIA_BUS_FMT_RGB565_2X8_LE 0x1008 ++#define MEDIA_BUS_FMT_BGR666_1X18 0x1023 + #define MEDIA_BUS_FMT_RGB666_1X18 0x1009 + #define MEDIA_BUS_FMT_RBG888_1X24 0x100e ++#define MEDIA_BUS_FMT_BGR666_1X24_CPADHI 0x1024 + #define MEDIA_BUS_FMT_RGB666_1X24_CPADHI 0x1015 + #define MEDIA_BUS_FMT_RGB666_1X7X3_SPWG 0x1010 + #define MEDIA_BUS_FMT_BGR888_1X24 0x1013 diff --git a/target/linux/bcm27xx/patches-6.1/950-0058-raspberrypi-firmware-Update-mailbox-commands.patch b/target/linux/bcm27xx/patches-6.1/950-0058-raspberrypi-firmware-Update-mailbox-commands.patch new file mode 100644 index 0000000000..4db60cca80 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0058-raspberrypi-firmware-Update-mailbox-commands.patch @@ -0,0 +1,99 @@ +From 9c48213eaa5603790ef3213637fd49bdb07e234a Mon Sep 17 00:00:00 2001 +From: Dom Cobley +Date: Thu, 7 Apr 2022 18:23:07 +0100 +Subject: [PATCH] raspberrypi-firmware: Update mailbox commands + +Signed-off-by: Dom Cobley +--- + include/soc/bcm2835/raspberrypi-firmware.h | 28 +++++++++++++++++++++- + 1 file changed, 27 insertions(+), 1 deletion(-) + +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -36,6 +36,8 @@ struct rpi_firmware_property_tag_header + enum rpi_firmware_property_tag { + RPI_FIRMWARE_PROPERTY_END = 0, + RPI_FIRMWARE_GET_FIRMWARE_REVISION = 0x00000001, ++ RPI_FIRMWARE_GET_FIRMWARE_VARIANT = 0x00000002, ++ RPI_FIRMWARE_GET_FIRMWARE_HASH = 0x00000003, + + RPI_FIRMWARE_SET_CURSOR_INFO = 0x00008010, + RPI_FIRMWARE_SET_CURSOR_STATE = 0x00008011, +@@ -71,6 +73,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014, + RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020, + RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021, ++ RPI_FIRMWARE_GET_EDID_BLOCK_DISPLAY = 0x00030023, + RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, + RPI_FIRMWARE_GET_THROTTLED = 0x00030046, + RPI_FIRMWARE_GET_CLOCK_MEASURED = 0x00030047, +@@ -89,8 +92,11 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_GET_PERIPH_REG = 0x00030045, + RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045, + RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049, +- RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050, ++ RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00038049, ++ RPI_FIRMWARE_SET_POE_HAT_VAL_OLD = 0x00030050, + RPI_FIRMWARE_NOTIFY_XHCI_RESET = 0x00030058, ++ RPI_FIRMWARE_GET_REBOOT_FLAGS = 0x00030064, ++ RPI_FIRMWARE_SET_REBOOT_FLAGS = 0x00038064, + RPI_FIRMWARE_NOTIFY_DISPLAY_DONE = 0x00030066, + + /* Dispmanx TAGS */ +@@ -105,9 +111,16 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009, + RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a, + RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_LAYER = 0x0004000c, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_TRANSFORM = 0x0004000d, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_VSYNC = 0x0004000e, + RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f, + RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010, + RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID = 0x00040016, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013, ++ RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014, + RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003, + RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004, + RPI_FIRMWARE_FRAMEBUFFER_TEST_DEPTH = 0x00044005, +@@ -116,26 +129,39 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009, + RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a, + RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b, ++ RPI_FIRMWARE_FRAMEBUFFER_TEST_LAYER = 0x0004400c, ++ RPI_FIRMWARE_FRAMEBUFFER_TEST_TRANSFORM = 0x0004400d, + RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e, + RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004, + RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005, + RPI_FIRMWARE_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006, + RPI_FIRMWARE_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_PITCH = 0x00048008, + RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009, + RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a, + RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b, ++ + RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f, + RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020, + RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_LAYER = 0x0004800c, ++ RPI_FIRMWARE_FRAMEBUFFER_SET_TRANSFORM = 0x0004800d, + RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f, + + RPI_FIRMWARE_VCHIQ_INIT = 0x00048010, + ++ RPI_FIRMWARE_SET_PLANE = 0x00048015, ++ RPI_FIRMWARE_GET_DISPLAY_TIMING = 0x00040017, ++ RPI_FIRMWARE_SET_TIMING = 0x00048017, ++ RPI_FIRMWARE_GET_DISPLAY_CFG = 0x00040018, ++ RPI_FIRMWARE_SET_DISPLAY_POWER = 0x00048019, + RPI_FIRMWARE_GET_COMMAND_LINE = 0x00050001, + RPI_FIRMWARE_GET_DMA_CHANNELS = 0x00060001, + }; + ++#define GET_DISPLAY_SETTINGS_PAYLOAD_SIZE 64 ++ + #if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE) + int rpi_firmware_property(struct rpi_firmware *fw, + u32 tag, void *data, size_t len); diff --git a/target/linux/bcm27xx/patches-6.1/950-0059-clk-bcm-rpi-Create-helper-to-retrieve-private-data.patch b/target/linux/bcm27xx/patches-6.1/950-0059-clk-bcm-rpi-Create-helper-to-retrieve-private-data.patch new file mode 100644 index 0000000000..1fd0792ddc --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0059-clk-bcm-rpi-Create-helper-to-retrieve-private-data.patch @@ -0,0 +1,70 @@ +From cdb7a9e14810f5cd40abf9cd3959294ee9283069 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 11 Jul 2022 15:58:36 +0200 +Subject: [PATCH] clk: bcm: rpi: Create helper to retrieve private data + +The RaspberryPi firmware clocks driver uses in several instances a +container_of to retrieve the struct raspberrypi_clk_data from a pointer +to struct clk_hw. Let's create a small function to avoid duplicating it +all over the place. + +Signed-off-by: Maxime Ripard +--- + drivers/clk/bcm/clk-raspberrypi.c | 18 ++++++++++-------- + 1 file changed, 10 insertions(+), 8 deletions(-) + +--- a/drivers/clk/bcm/clk-raspberrypi.c ++++ b/drivers/clk/bcm/clk-raspberrypi.c +@@ -75,6 +75,12 @@ struct raspberrypi_clk_data { + struct raspberrypi_clk *rpi; + }; + ++static inline ++const struct raspberrypi_clk_data *clk_hw_to_data(const struct clk_hw *hw) ++{ ++ return container_of(hw, struct raspberrypi_clk_data, hw); ++} ++ + struct raspberrypi_clk_variant { + bool export; + char *clkdev; +@@ -187,8 +193,7 @@ static int raspberrypi_clock_property(st + + static int raspberrypi_fw_is_prepared(struct clk_hw *hw) + { +- struct raspberrypi_clk_data *data = +- container_of(hw, struct raspberrypi_clk_data, hw); ++ const struct raspberrypi_clk_data *data = clk_hw_to_data(hw); + struct raspberrypi_clk *rpi = data->rpi; + u32 val = 0; + int ret; +@@ -205,8 +210,7 @@ static int raspberrypi_fw_is_prepared(st + static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw, + unsigned long parent_rate) + { +- struct raspberrypi_clk_data *data = +- container_of(hw, struct raspberrypi_clk_data, hw); ++ const struct raspberrypi_clk_data *data = clk_hw_to_data(hw); + struct raspberrypi_clk *rpi = data->rpi; + u32 val = 0; + int ret; +@@ -222,8 +226,7 @@ static unsigned long raspberrypi_fw_get_ + static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) + { +- struct raspberrypi_clk_data *data = +- container_of(hw, struct raspberrypi_clk_data, hw); ++ const struct raspberrypi_clk_data *data = clk_hw_to_data(hw); + struct raspberrypi_clk *rpi = data->rpi; + u32 _rate = rate; + int ret; +@@ -240,8 +243,7 @@ static int raspberrypi_fw_set_rate(struc + static int raspberrypi_fw_dumb_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) + { +- struct raspberrypi_clk_data *data = +- container_of(hw, struct raspberrypi_clk_data, hw); ++ const struct raspberrypi_clk_data *data = clk_hw_to_data(hw); + struct raspberrypi_clk_variant *variant = data->variant; + + /* diff --git a/target/linux/bcm27xx/patches-6.1/950-0060-arm64-setup-Fix-build-warning.patch b/target/linux/bcm27xx/patches-6.1/950-0060-arm64-setup-Fix-build-warning.patch new file mode 100644 index 0000000000..bc6065bce8 --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0060-arm64-setup-Fix-build-warning.patch @@ -0,0 +1,24 @@ +From eedea0d30a542f255626876be44929af8efc337a Mon Sep 17 00:00:00 2001 +From: Maxime Ripard +Date: Mon, 6 Jun 2022 11:02:16 +0200 +Subject: [PATCH] arm64: setup: Fix build warning + +Signed-off-by: Maxime Ripard +--- + arch/arm64/kernel/setup.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm64/kernel/setup.c ++++ b/arch/arm64/kernel/setup.c +@@ -222,9 +222,9 @@ static void __init request_standard_reso + size_t res_size; + + kernel_code.start = __pa_symbol(_stext); +- kernel_code.end = __pa_symbol(__init_begin - 1); ++ kernel_code.end = __pa_symbol(__init_begin) - 1; + kernel_data.start = __pa_symbol(_sdata); +- kernel_data.end = __pa_symbol(_end - 1); ++ kernel_data.end = __pa_symbol(_end) - 1; + insert_resource(&iomem_resource, &kernel_code); + insert_resource(&iomem_resource, &kernel_data); + diff --git a/target/linux/bcm27xx/patches-6.1/950-0061-BCM2708-Add-core-Device-Tree-support.patch b/target/linux/bcm27xx/patches-6.1/950-0061-BCM2708-Add-core-Device-Tree-support.patch new file mode 100644 index 0000000000..442abb456f --- /dev/null +++ b/target/linux/bcm27xx/patches-6.1/950-0061-BCM2708-Add-core-Device-Tree-support.patch @@ -0,0 +1,37866 @@ +From c34870e7abd75a66d473b1e3c12d47e8b9c349e6 Mon Sep 17 00:00:00 2001 +From: notro +Date: Wed, 9 Jul 2014 14:46:08 +0200 +Subject: [PATCH] BCM2708: Add core Device Tree support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add the bare minimum needed to boot BCM2708 from a Device Tree. + +Signed-off-by: Noralf Tronnes + +BCM2708: DT: change 'axi' nodename to 'soc' + +Change DT node named 'axi' to 'soc' so it matches ARCH_BCM2835. +The VC4 bootloader fills in certain properties in the 'axi' subtree, +but since this is part of an upstreaming effort, the name is changed. + +Signed-off-by: Noralf Tronnes notro@tronnes.org + +BCM2708_DT: Correct length of the peripheral space + +Use dts-dirs feature for overlays. + +The kernel makefiles have a dts-dirs target that is for vendor subdirectories. + +Using this fixes the install_dtbs target, which previously did not install the overlays. + +BCM270X_DT: configure I2S DMA channels + +Signed-off-by: Matthias Reichl + +BCM270X_DT: switch to bcm2835-i2s + +I2S soundcard drivers with proper devicetree support (i.e. not linking +to the cpu_dai/platform via name but to cpu/platform via of_node) +will work out of the box without any modifications. + +When the kernel is compiled without devicetree support the platform +code will instantiate the bcm2708-i2s driver and I2S soundcard drivers +will link to it via name, as before. + +Signed-off-by: Matthias Reichl + +SDIO-overlay: add poll_once-boolean parameter + +Add paramter to toggle sdio-device-polling +done every second or once at boot-time. + +Signed-off-by: Patrick Boettcher + +BCM270X_DT: Make mmc overlay compatible with current firmware + +The original DT overlay logic followed a merge-then-patch procedure, +i.e. parameters are applied to the loaded overlay before the overlay +is merged into the base DTB. This sequence has been changed to +patch-then-merge, in order to support parameterised node names, and +to protect against bad overlays. As a result, overrides (parameters) +must only target labels in the overlay, but the overlay can obviously target nodes in the base DTB. + +mmc-overlay.dts (that switches back to the original mmc sdcard +driver) is the only overlay violating that rule, and this patch +fixes it. + +bcm270x_dt: Use the sdhost MMC controller by default + +The "mmc" overlay reverts to using the other controller. + +squash: Add cprman to dt + +BCM270X_DT: Use clk_core for I2C interfaces + +BCM270X_DT: Use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi + +The mainline Device Tree files are quite close to downstream now. +Let's use bcm283x.dtsi, bcm2835.dtsi and bcm2836.dtsi as base files +for our dts files. + +Mainline dts files are based on these files: + + bcm2835-rpi.dtsi + bcm2835.dtsi bcm2836.dtsi + bcm283x.dtsi + +Current downstream are based on these: + + bcm2708.dtsi bcm2709.dtsi bcm2710.dtsi + bcm2708_common.dtsi + +This patch introduces this dependency: + + bcm2708.dtsi bcm2709.dtsi + bcm2708-rpi.dtsi + bcm270x.dtsi + bcm2835.dtsi bcm2836.dtsi + bcm283x.dtsi + +And: + bcm2710.dtsi + bcm2708-rpi.dtsi + bcm270x.dtsi + bcm283x.dtsi + +bcm270x.dtsi contains the downstream bcm283x.dtsi diff. +bcm2708-rpi.dtsi is the downstream version of bcm2835-rpi.dtsi. + +Other changes: +- The led node has moved from /soc/leds to /leds. This is not a problem + since the label is used to reference it. +- The clk_osc reg property changes from 6 to 3. +- The gpu nodes has their interrupt property set in the base file. +- the clocks label does not point to the /clocks node anymore, but + points to the cprman node. This is not a problem since the overlays + that use the clock node refer to it directly: target-path = "/clocks"; +- some nodes now have 2 labels since mainline and downstream differs in + this respect: cprman/clocks, spi0/spi, gpu/vc4. +- some nodes doesn't have an explicit status = "okay" since they're not + disabled in the base file: watchdog and random. +- gpiomem doesn't need an explicit status = "okay". +- bcm2708-rpi-cm.dts got the hpd-gpios property from bcm2708_common.dtsi, + it's now set directly in that file. +- bcm2709-rpi-2-b.dts has the timer node moved from /soc/timer to /timer. +- Removed clock-frequency property on the bcm{2709,2710}.dtsi timer nodes. + +Signed-off-by: Noralf Trønnes + +BCM270X_DT: Use raspberrypi-power to turn on USB power + +Use the raspberrypi-power driver to turn on USB power. + +Signed-off-by: Noralf Trønnes + +BCM270X_DT: Add a .dtbo target, use for overlays + +Change the filenames and extensions to keep the pre-DDT style of +overlay (-overlay.dtb) distinct from new ones that use a +different style of local fixups (.dtbo), and to match other +platforms. + +The RPi firmware uses the DDTK trailer atom to choose which type of +overlay to use for each kernel. + +Signed-off-by: Phil Elwell + +BCM270X_DT: Don't generate "linux,phandle" props + +The EPAPR standard says to use "phandle" properties to store phandles, +rather than the deprecated "linux,phandle" version. By default, dtc +generates both, but adding "-H epapr" causes it to only generate +"phandle"s, saving some space and clutter. + +Signed-off-by: Phil Elwell + +BCM270X_DT: Add overlay for enc28j60 on SPI2 + +Works on SPI2 for compute module + +BCM270X_DT: Add midi-uart0 overlay + +MIDI requires 31.25kbaud, a baudrate unsupported by Linux. The +midi-uart0 overlay configures uart0 (ttyAMA0) to use a fake clock +so that requesting 38.4kbaud actually gets 31.25kbaud. + +Signed-off-by: Phil Elwell + +BCM270X_DT: Add i2c-sensor overlay + +The i2c-sensor overlay is a container for various pressure and +temperature sensors, currently bmp085 and bmp280. The standalone +bmp085_i2c-sensor overlay is now deprecated. + +Signed-off-by: Phil Elwell + +BCM270X_DT: overlays/*-overlay.dtb -> overlays/*.dtbo (#1752) + +We now create overlays as .dtbo files. + +build: support for .dtbo files for dtb overlays + +Kernel 4.4.6+ on RaspberryPi support .dtbo files for overlays, instead of .dtb. +Patch the kernel, which has faulty rules to generate .dtbo the way yocto does + +Signed-off-by: Herve Jourdain +Signed-off-by: Khem Raj + +BCM270X: Drop position requirement for CMA in VC4 overlay. + +No longer necessary since 2aefcd576195a739a7a256099571c9c4a401005f, +and will probably let peeople that want to choose a larger CMA +allocation (particularly on pi0/1). + +Signed-off-by: Eric Anholt + +BCM270X_DT: RPi Device Tree tidy + +Use the upstream sdhost node, add thermal-zones, and factor out some +common elements. + +Signed-off-by: Phil Elwell + +kbuild: Silence unhelpful DTC warnings + +Signed-off-by: Phil Elwell + +BCM270X_DT: DT build rules no longer arch-specific + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 31 + + arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 200 + + arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts | 208 + + arch/arm/boot/dts/bcm2708-rpi-b.dts | 190 + + arch/arm/boot/dts/bcm2708-rpi-bt.dtsi | 26 + + arch/arm/boot/dts/bcm2708-rpi-cm.dts | 171 + + arch/arm/boot/dts/bcm2708-rpi-cm.dtsi | 22 + + arch/arm/boot/dts/bcm2708-rpi-zero-w.dts | 246 + + arch/arm/boot/dts/bcm2708-rpi-zero.dts | 187 + + arch/arm/boot/dts/bcm2708-rpi.dtsi | 40 + + arch/arm/boot/dts/bcm2708.dtsi | 18 + + arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 200 + + arch/arm/boot/dts/bcm2709-rpi-cm2.dts | 221 + + arch/arm/boot/dts/bcm2709-rpi.dtsi | 5 + + arch/arm/boot/dts/bcm2709.dtsi | 24 + + arch/arm/boot/dts/bcm270x-rpi.dtsi | 177 + + arch/arm/boot/dts/bcm270x.dtsi | 294 ++ + arch/arm/boot/dts/bcm2710-rpi-2-b.dts | 200 + + arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 289 ++ + arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 291 ++ + arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 220 + + arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts | 267 + + arch/arm/boot/dts/bcm2710-rpi-zero-2.dts | 1 + + arch/arm/boot/dts/bcm2710.dtsi | 27 + + arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 320 +- + arch/arm/boot/dts/bcm2711-rpi-400.dts | 532 +- + arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 578 +++ + arch/arm/boot/dts/bcm2711-rpi-cm4s.dts | 427 ++ + arch/arm/boot/dts/bcm2711-rpi-ds.dtsi | 292 ++ + arch/arm/boot/dts/bcm2711-rpi.dtsi | 13 + + arch/arm/boot/dts/bcm271x-rpi-bt.dtsi | 26 + + arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi | 4 + + arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi | 4 + + arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi | 4 + + .../boot/dts/bcm283x-rpi-i2c0mux_0_28.dtsi | 4 + + .../boot/dts/bcm283x-rpi-i2c0mux_0_44.dtsi | 4 + + arch/arm/boot/dts/overlays/Makefile | 287 ++ + arch/arm/boot/dts/overlays/README | 4513 +++++++++++++++++ + .../arm/boot/dts/overlays/act-led-overlay.dts | 27 + + .../dts/overlays/adafruit-st7735r-overlay.dts | 83 + + .../boot/dts/overlays/adafruit18-overlay.dts | 55 + + .../dts/overlays/adau1977-adc-overlay.dts | 40 + + .../dts/overlays/adau7002-simple-overlay.dts | 52 + + .../arm/boot/dts/overlays/ads1015-overlay.dts | 98 + + .../arm/boot/dts/overlays/ads1115-overlay.dts | 103 + + .../arm/boot/dts/overlays/ads7846-overlay.dts | 89 + + .../boot/dts/overlays/adv7282m-overlay.dts | 73 + + .../boot/dts/overlays/adv728x-m-overlay.dts | 37 + + .../overlays/akkordion-iqdacplus-overlay.dts | 49 + + .../allo-boss-dac-pcm512x-audio-overlay.dts | 59 + + .../overlays/allo-boss2-dac-audio-overlay.dts | 57 + + .../dts/overlays/allo-digione-overlay.dts | 44 + + .../allo-katana-dac-audio-overlay.dts | 57 + + .../allo-piano-dac-pcm512x-audio-overlay.dts | 54 + + ...o-piano-dac-plus-pcm512x-audio-overlay.dts | 57 + + arch/arm/boot/dts/overlays/anyspi-overlay.dts | 205 + + .../boot/dts/overlays/apds9960-overlay.dts | 55 + + .../boot/dts/overlays/applepi-dac-overlay.dts | 57 + + .../dts/overlays/arducam-64mp-overlay.dts | 94 + + .../overlays/arducam-pivariety-overlay.dts | 94 + + .../boot/dts/overlays/at86rf233-overlay.dts | 57 + + .../overlays/audioinjector-addons-overlay.dts | 60 + + .../audioinjector-bare-i2s-overlay.dts | 50 + + ...dioinjector-isolated-soundcard-overlay.dts | 55 + + .../overlays/audioinjector-ultra-overlay.dts | 71 + + .../audioinjector-wm8731-audio-overlay.dts | 39 + + .../dts/overlays/audiosense-pi-overlay.dts | 82 + + .../boot/dts/overlays/audremap-overlay.dts | 44 + + .../boot/dts/overlays/balena-fin-overlay.dts | 125 + + .../dts/overlays/camera-mux-2port-overlay.dts | 409 ++ + .../dts/overlays/camera-mux-4port-overlay.dts | 684 +++ + .../arm/boot/dts/overlays/cap1106-overlay.dts | 52 + + .../boot/dts/overlays/chipdip-dac-overlay.dts | 46 + + .../dts/overlays/cirrus-wm5102-overlay.dts | 172 + + arch/arm/boot/dts/overlays/cma-overlay.dts | 36 + + .../dts/overlays/cutiepi-panel-overlay.dts | 117 + + .../boot/dts/overlays/dacberry400-overlay.dts | 71 + + arch/arm/boot/dts/overlays/dht11-overlay.dts | 48 + + .../dts/overlays/dionaudio-kiwi-overlay.dts | 39 + + .../dts/overlays/dionaudio-loco-overlay.dts | 39 + + .../overlays/dionaudio-loco-v2-overlay.dts | 49 + + .../boot/dts/overlays/disable-bt-overlay.dts | 64 + + .../dts/overlays/disable-wifi-overlay.dts | 20 + + arch/arm/boot/dts/overlays/dpi18-overlay.dts | 39 + + .../boot/dts/overlays/dpi18cpadhi-overlay.dts | 26 + + arch/arm/boot/dts/overlays/dpi24-overlay.dts | 39 + + arch/arm/boot/dts/overlays/draws-overlay.dts | 208 + + .../arm/boot/dts/overlays/dwc-otg-overlay.dts | 14 + + arch/arm/boot/dts/overlays/dwc2-overlay.dts | 26 + + .../boot/dts/overlays/edt-ft5406-overlay.dts | 26 + + arch/arm/boot/dts/overlays/edt-ft5406.dtsi | 47 + + .../boot/dts/overlays/enc28j60-overlay.dts | 53 + + .../dts/overlays/enc28j60-spi2-overlay.dts | 47 + + .../arm/boot/dts/overlays/exc3000-overlay.dts | 48 + + arch/arm/boot/dts/overlays/fbtft-overlay.dts | 611 +++ + .../boot/dts/overlays/fe-pi-audio-overlay.dts | 70 + + .../boot/dts/overlays/fsm-demo-overlay.dts | 104 + + arch/arm/boot/dts/overlays/gc9a01-overlay.dts | 151 + + .../boot/dts/overlays/ghost-amp-overlay.dts | 145 + + arch/arm/boot/dts/overlays/goodix-overlay.dts | 46 + + .../googlevoicehat-soundcard-overlay.dts | 49 + + .../boot/dts/overlays/gpio-fan-overlay.dts | 89 + + .../boot/dts/overlays/gpio-hog-overlay.dts | 27 + + .../arm/boot/dts/overlays/gpio-ir-overlay.dts | 49 + + .../boot/dts/overlays/gpio-ir-tx-overlay.dts | 36 + + .../boot/dts/overlays/gpio-key-overlay.dts | 48 + + .../boot/dts/overlays/gpio-led-overlay.dts | 97 + + .../overlays/gpio-no-bank0-irq-overlay.dts | 14 + + .../boot/dts/overlays/gpio-no-irq-overlay.dts | 14 + + .../dts/overlays/gpio-poweroff-overlay.dts | 39 + + .../dts/overlays/gpio-shutdown-overlay.dts | 86 + + .../boot/dts/overlays/hd44780-lcd-overlay.dts | 46 + + .../hdmi-backlight-hwhack-gpio-overlay.dts | 47 + + .../dts/overlays/hifiberry-amp-overlay.dts | 39 + + .../dts/overlays/hifiberry-amp100-overlay.dts | 64 + + .../dts/overlays/hifiberry-amp3-overlay.dts | 57 + + .../dts/overlays/hifiberry-dac-overlay.dts | 34 + + .../overlays/hifiberry-dacplus-overlay.dts | 65 + + .../overlays/hifiberry-dacplusadc-overlay.dts | 72 + + .../hifiberry-dacplusadcpro-overlay.dts | 70 + + .../overlays/hifiberry-dacplusdsp-overlay.dts | 34 + + .../overlays/hifiberry-dacplushd-overlay.dts | 94 + + .../dts/overlays/hifiberry-digi-overlay.dts | 41 + + .../overlays/hifiberry-digi-pro-overlay.dts | 43 + + .../boot/dts/overlays/highperi-overlay.dts | 63 + + arch/arm/boot/dts/overlays/hy28a-overlay.dts | 93 + + .../boot/dts/overlays/hy28b-2017-overlay.dts | 152 + + arch/arm/boot/dts/overlays/hy28b-overlay.dts | 148 + + .../boot/dts/overlays/i-sabre-q2m-overlay.dts | 39 + + .../boot/dts/overlays/i2c-bcm2708-overlay.dts | 13 + + .../arm/boot/dts/overlays/i2c-fan-overlay.dts | 108 + + .../boot/dts/overlays/i2c-gpio-overlay.dts | 47 + + .../arm/boot/dts/overlays/i2c-mux-overlay.dts | 139 + + .../dts/overlays/i2c-pwm-pca9685a-overlay.dts | 26 + + .../arm/boot/dts/overlays/i2c-rtc-common.dtsi | 351 ++ + .../dts/overlays/i2c-rtc-gpio-overlay.dts | 31 + + .../arm/boot/dts/overlays/i2c-rtc-overlay.dts | 42 + + .../boot/dts/overlays/i2c-sensor-common.dtsi | 341 ++ + .../boot/dts/overlays/i2c-sensor-overlay.dts | 42 + + arch/arm/boot/dts/overlays/i2c0-overlay.dts | 83 + + arch/arm/boot/dts/overlays/i2c1-overlay.dts | 44 + + arch/arm/boot/dts/overlays/i2c3-overlay.dts | 36 + + arch/arm/boot/dts/overlays/i2c4-overlay.dts | 36 + + arch/arm/boot/dts/overlays/i2c5-overlay.dts | 36 + + arch/arm/boot/dts/overlays/i2c6-overlay.dts | 36 + + .../arm/boot/dts/overlays/i2s-dac-overlay.dts | 34 + + .../dts/overlays/i2s-gpio28-31-overlay.dts | 18 + + .../boot/dts/overlays/ilitek251x-overlay.dts | 45 + + arch/arm/boot/dts/overlays/imx219-overlay.dts | 89 + + arch/arm/boot/dts/overlays/imx219.dtsi | 27 + + arch/arm/boot/dts/overlays/imx258-overlay.dts | 131 + + arch/arm/boot/dts/overlays/imx258.dtsi | 27 + + arch/arm/boot/dts/overlays/imx290-overlay.dts | 32 + + .../boot/dts/overlays/imx290_327-overlay.dtsi | 112 + + arch/arm/boot/dts/overlays/imx290_327.dtsi | 24 + + arch/arm/boot/dts/overlays/imx296-overlay.dts | 103 + + arch/arm/boot/dts/overlays/imx327-overlay.dts | 32 + + arch/arm/boot/dts/overlays/imx378-overlay.dts | 10 + + arch/arm/boot/dts/overlays/imx462-overlay.dts | 32 + + arch/arm/boot/dts/overlays/imx477-overlay.dts | 10 + + .../boot/dts/overlays/imx477_378-overlay.dtsi | 83 + + arch/arm/boot/dts/overlays/imx477_378.dtsi | 24 + + arch/arm/boot/dts/overlays/imx519-overlay.dts | 96 + + .../dts/overlays/iqaudio-codec-overlay.dts | 42 + + .../boot/dts/overlays/iqaudio-dac-overlay.dts | 46 + + .../dts/overlays/iqaudio-dacplus-overlay.dts | 49 + + .../iqaudio-digi-wm8804-audio-overlay.dts | 47 + + arch/arm/boot/dts/overlays/iqs550-overlay.dts | 59 + + .../arm/boot/dts/overlays/irs1125-overlay.dts | 90 + + .../dts/overlays/jedec-spi-nor-overlay.dts | 309 ++ + .../dts/overlays/justboom-both-overlay.dts | 65 + + .../dts/overlays/justboom-dac-overlay.dts | 46 + + .../dts/overlays/justboom-digi-overlay.dts | 41 + + .../arm/boot/dts/overlays/ltc294x-overlay.dts | 86 + + .../boot/dts/overlays/max98357a-overlay.dts | 84 + + .../boot/dts/overlays/maxtherm-overlay.dts | 186 + + .../boot/dts/overlays/mbed-dac-overlay.dts | 64 + + .../boot/dts/overlays/mcp23017-overlay.dts | 69 + + .../boot/dts/overlays/mcp23s17-overlay.dts | 732 +++ + .../dts/overlays/mcp2515-can0-overlay.dts | 73 + + .../dts/overlays/mcp2515-can1-overlay.dts | 73 + + .../arm/boot/dts/overlays/mcp2515-overlay.dts | 156 + + .../boot/dts/overlays/mcp251xfd-overlay.dts | 226 + + .../arm/boot/dts/overlays/mcp3008-overlay.dts | 205 + + .../arm/boot/dts/overlays/mcp3202-overlay.dts | 205 + + .../arm/boot/dts/overlays/mcp342x-overlay.dts | 164 + + .../dts/overlays/media-center-overlay.dts | 134 + + .../boot/dts/overlays/merus-amp-overlay.dts | 59 + + .../boot/dts/overlays/midi-uart0-overlay.dts | 36 + + .../boot/dts/overlays/midi-uart1-overlay.dts | 43 + + .../boot/dts/overlays/midi-uart2-overlay.dts | 37 + + .../boot/dts/overlays/midi-uart3-overlay.dts | 38 + + .../boot/dts/overlays/midi-uart4-overlay.dts | 38 + + .../boot/dts/overlays/midi-uart5-overlay.dts | 38 + + .../boot/dts/overlays/minipitft13-overlay.dts | 70 + + .../boot/dts/overlays/miniuart-bt-overlay.dts | 93 + + .../dts/overlays/mipi-dbi-spi-overlay.dts | 175 + + .../boot/dts/overlays/mlx90640-overlay.dts | 22 + + arch/arm/boot/dts/overlays/mmc-overlay.dts | 46 + + .../arm/boot/dts/overlays/mpu6050-overlay.dts | 29 + + .../arm/boot/dts/overlays/mz61581-overlay.dts | 117 + + arch/arm/boot/dts/overlays/ov2311-overlay.dts | 77 + + arch/arm/boot/dts/overlays/ov2311.dtsi | 26 + + arch/arm/boot/dts/overlays/ov5647-overlay.dts | 92 + + arch/arm/boot/dts/overlays/ov5647.dtsi | 25 + + arch/arm/boot/dts/overlays/ov7251-overlay.dts | 77 + + arch/arm/boot/dts/overlays/ov7251.dtsi | 28 + + arch/arm/boot/dts/overlays/ov9281-overlay.dts | 78 + + arch/arm/boot/dts/overlays/ov9281.dtsi | 27 + + arch/arm/boot/dts/overlays/overlay_map.dts | 211 + + .../arm/boot/dts/overlays/papirus-overlay.dts | 84 + + .../arm/boot/dts/overlays/pca953x-overlay.dts | 240 + + .../dts/overlays/pcie-32bit-dma-overlay.dts | 38 + + arch/arm/boot/dts/overlays/pibell-overlay.dts | 81 + + .../dts/overlays/pifacedigital-overlay.dts | 144 + + .../arm/boot/dts/overlays/pifi-40-overlay.dts | 50 + + .../boot/dts/overlays/pifi-dac-hd-overlay.dts | 49 + + .../dts/overlays/pifi-dac-zero-overlay.dts | 49 + + .../dts/overlays/pifi-mini-210-overlay.dts | 42 + + arch/arm/boot/dts/overlays/piglow-overlay.dts | 97 + + .../boot/dts/overlays/piscreen-overlay.dts | 102 + + .../boot/dts/overlays/piscreen2r-overlay.dts | 106 + + .../arm/boot/dts/overlays/pisound-overlay.dts | 120 + + .../arm/boot/dts/overlays/pitft22-overlay.dts | 69 + + .../overlays/pitft28-capacitive-overlay.dts | 91 + + .../overlays/pitft28-resistive-overlay.dts | 121 + + .../overlays/pitft35-resistive-overlay.dts | 122 + + .../boot/dts/overlays/pps-gpio-overlay.dts | 39 + + .../boot/dts/overlays/proto-codec-overlay.dts | 39 + + .../boot/dts/overlays/pwm-2chan-overlay.dts | 49 + + .../boot/dts/overlays/pwm-ir-tx-overlay.dts | 40 + + arch/arm/boot/dts/overlays/pwm-overlay.dts | 45 + + .../arm/boot/dts/overlays/qca7000-overlay.dts | 55 + + .../dts/overlays/qca7000-uart0-overlay.dts | 46 + + .../arm/boot/dts/overlays/ramoops-overlay.dts | 25 + + .../boot/dts/overlays/ramoops-pi4-overlay.dts | 25 + + .../dts/overlays/rotary-encoder-overlay.dts | 59 + + .../dts/overlays/rpi-backlight-overlay.dts | 21 + + .../dts/overlays/rpi-codeczero-overlay.dts | 9 + + .../boot/dts/overlays/rpi-dacplus-overlay.dts | 17 + + .../boot/dts/overlays/rpi-dacpro-overlay.dts | 17 + + .../dts/overlays/rpi-digiampplus-overlay.dts | 17 + + .../boot/dts/overlays/rpi-ft5406-overlay.dts | 25 + + .../arm/boot/dts/overlays/rpi-poe-overlay.dts | 154 + + .../dts/overlays/rpi-poe-plus-overlay.dts | 49 + + .../boot/dts/overlays/rpi-sense-overlay.dts | 47 + + .../dts/overlays/rpi-sense-v2-overlay.dts | 47 + + arch/arm/boot/dts/overlays/rpi-tv-overlay.dts | 34 + + .../rra-digidac1-wm8741-audio-overlay.dts | 49 + + .../boot/dts/overlays/sainsmart18-overlay.dts | 52 + + .../dts/overlays/sc16is750-i2c-overlay.dts | 43 + + .../dts/overlays/sc16is752-i2c-overlay.dts | 43 + + .../dts/overlays/sc16is752-spi0-overlay.dts | 49 + + .../dts/overlays/sc16is752-spi1-overlay.dts | 67 + + arch/arm/boot/dts/overlays/sdhost-overlay.dts | 38 + + arch/arm/boot/dts/overlays/sdio-overlay.dts | 77 + + .../overlays/seeed-can-fd-hat-v1-overlay.dts | 138 + + .../overlays/seeed-can-fd-hat-v2-overlay.dts | 117 + + .../boot/dts/overlays/sh1106-spi-overlay.dts | 84 + + .../boot/dts/overlays/si446x-spi0-overlay.dts | 53 + + .../arm/boot/dts/overlays/smi-dev-overlay.dts | 20 + + .../boot/dts/overlays/smi-nand-overlay.dts | 66 + + arch/arm/boot/dts/overlays/smi-overlay.dts | 37 + + .../dts/overlays/spi-gpio35-39-overlay.dts | 31 + + .../dts/overlays/spi-gpio40-45-overlay.dts | 36 + + .../arm/boot/dts/overlays/spi-rtc-overlay.dts | 75 + + .../boot/dts/overlays/spi0-0cs-overlay.dts | 39 + + .../boot/dts/overlays/spi0-1cs-overlay.dts | 42 + + .../boot/dts/overlays/spi0-2cs-overlay.dts | 37 + + .../boot/dts/overlays/spi1-1cs-overlay.dts | 57 + + .../boot/dts/overlays/spi1-2cs-overlay.dts | 69 + + .../boot/dts/overlays/spi1-3cs-overlay.dts | 81 + + .../boot/dts/overlays/spi2-1cs-overlay.dts | 57 + + .../boot/dts/overlays/spi2-2cs-overlay.dts | 69 + + .../boot/dts/overlays/spi2-3cs-overlay.dts | 81 + + .../boot/dts/overlays/spi3-1cs-overlay.dts | 44 + + .../boot/dts/overlays/spi3-2cs-overlay.dts | 56 + + .../boot/dts/overlays/spi4-1cs-overlay.dts | 44 + + .../boot/dts/overlays/spi4-2cs-overlay.dts | 56 + + .../boot/dts/overlays/spi5-1cs-overlay.dts | 44 + + .../boot/dts/overlays/spi5-2cs-overlay.dts | 56 + + .../boot/dts/overlays/spi6-1cs-overlay.dts | 44 + + .../boot/dts/overlays/spi6-2cs-overlay.dts | 56 + + .../arm/boot/dts/overlays/ssd1306-overlay.dts | 36 + + .../boot/dts/overlays/ssd1306-spi-overlay.dts | 84 + + .../boot/dts/overlays/ssd1331-spi-overlay.dts | 83 + + .../boot/dts/overlays/ssd1351-spi-overlay.dts | 83 + + .../dts/overlays/superaudioboard-overlay.dts | 73 + + arch/arm/boot/dts/overlays/sx150x-overlay.dts | 1706 +++++++ + .../dts/overlays/tc358743-audio-overlay.dts | 52 + + .../boot/dts/overlays/tc358743-overlay.dts | 109 + + .../boot/dts/overlays/tinylcd35-overlay.dts | 222 + + .../boot/dts/overlays/tpm-slb9670-overlay.dts | 44 + + .../boot/dts/overlays/tpm-slb9673-overlay.dts | 50 + + arch/arm/boot/dts/overlays/uart0-overlay.dts | 32 + + arch/arm/boot/dts/overlays/uart1-overlay.dts | 38 + + arch/arm/boot/dts/overlays/uart2-overlay.dts | 27 + + arch/arm/boot/dts/overlays/uart3-overlay.dts | 27 + + arch/arm/boot/dts/overlays/uart4-overlay.dts | 27 + + arch/arm/boot/dts/overlays/uart5-overlay.dts | 27 + + arch/arm/boot/dts/overlays/udrc-overlay.dts | 128 + + .../dts/overlays/ugreen-dabboard-overlay.dts | 49 + + .../boot/dts/overlays/upstream-overlay.dts | 101 + + .../dts/overlays/upstream-pi4-overlay.dts | 137 + + .../dts/overlays/vc4-fkms-v3d-overlay.dts | 40 + + .../dts/overlays/vc4-fkms-v3d-pi4-overlay.dts | 44 + + .../overlays/vc4-kms-dpi-generic-overlay.dts | 81 + + .../dts/overlays/vc4-kms-dpi-hyperpixel.dtsi | 94 + + .../vc4-kms-dpi-hyperpixel2r-overlay.dts | 114 + + .../vc4-kms-dpi-hyperpixel4-overlay.dts | 57 + + .../vc4-kms-dpi-hyperpixel4sq-overlay.dts | 36 + + .../overlays/vc4-kms-dpi-panel-overlay.dts | 69 + + arch/arm/boot/dts/overlays/vc4-kms-dpi.dtsi | 111 + + .../overlays/vc4-kms-dsi-7inch-overlay.dts | 118 + + .../vc4-kms-dsi-lt070me05000-overlay.dts | 69 + + .../vc4-kms-dsi-lt070me05000-v2-overlay.dts | 64 + + .../overlays/vc4-kms-kippah-7inch-overlay.dts | 26 + + .../boot/dts/overlays/vc4-kms-v3d-overlay.dts | 124 + + .../dts/overlays/vc4-kms-v3d-pi4-overlay.dts | 200 + + .../dts/overlays/vc4-kms-vga666-overlay.dts | 100 + + arch/arm/boot/dts/overlays/vga666-overlay.dts | 30 + + arch/arm/boot/dts/overlays/vl805-overlay.dts | 18 + + .../arm/boot/dts/overlays/w1-gpio-overlay.dts | 40 + + .../dts/overlays/w1-gpio-pullup-overlay.dts | 42 + + arch/arm/boot/dts/overlays/w5500-overlay.dts | 63 + + .../overlays/watterott-display-overlay.dts | 150 + + .../waveshare-can-fd-hat-mode-a-overlay.dts | 140 + + .../waveshare-can-fd-hat-mode-b-overlay.dts | 103 + + .../arm/boot/dts/overlays/wittypi-overlay.dts | 44 + + .../dts/overlays/wm8960-soundcard-overlay.dts | 82 + + arch/arm64/boot/dts/Makefile | 2 + + arch/arm64/boot/dts/broadcom/Makefile | 14 + + .../boot/dts/broadcom/bcm2710-rpi-2-b.dts | 1 + + .../dts/broadcom/bcm2710-rpi-3-b-plus.dts | 1 + + .../boot/dts/broadcom/bcm2710-rpi-3-b.dts | 1 + + .../boot/dts/broadcom/bcm2710-rpi-cm3.dts | 1 + + .../dts/broadcom/bcm2710-rpi-zero-2-w.dts | 1 + + .../boot/dts/broadcom/bcm2710-rpi-zero-2.dts | 1 + + .../boot/dts/broadcom/bcm2711-rpi-4-b.dts | 3 +- + .../boot/dts/broadcom/bcm2711-rpi-400.dts | 3 +- + .../boot/dts/broadcom/bcm2711-rpi-cm4.dts | 1 + + .../boot/dts/broadcom/bcm2711-rpi-cm4s.dts | 1 + + .../dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi | 1 + + .../dts/broadcom/bcm283x-rpi-lan7515.dtsi | 1 + + arch/arm64/boot/dts/overlays | 1 + + include/dt-bindings/gpio/gpio-fsm.h | 21 + + scripts/Makefile.dtbinst | 3 +- + scripts/Makefile.lib | 13 + + 348 files changed, 34772 insertions(+), 16 deletions(-) + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b-plus.dts + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-b.dts + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-bt.dtsi + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-cm.dts + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-cm.dtsi + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-zero-w.dts + create mode 100644 arch/arm/boot/dts/bcm2708-rpi-zero.dts + create mode 100644 arch/arm/boot/dts/bcm2708-rpi.dtsi + create mode 100644 arch/arm/boot/dts/bcm2708.dtsi + create mode 100644 arch/arm/boot/dts/bcm2709-rpi-2-b.dts + create mode 100644 arch/arm/boot/dts/bcm2709-rpi-cm2.dts + create mode 100644 arch/arm/boot/dts/bcm2709-rpi.dtsi + create mode 100644 arch/arm/boot/dts/bcm2709.dtsi + create mode 100644 arch/arm/boot/dts/bcm270x-rpi.dtsi + create mode 100644 arch/arm/boot/dts/bcm270x.dtsi + create mode 100644 arch/arm/boot/dts/bcm2710-rpi-2-b.dts + create mode 100644 arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts + create mode 100644 arch/arm/boot/dts/bcm2710-rpi-3-b.dts + create mode 100644 arch/arm/boot/dts/bcm2710-rpi-cm3.dts + create mode 100644 arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts + create mode 100644 arch/arm/boot/dts/bcm2710-rpi-zero-2.dts + create mode 100644 arch/arm/boot/dts/bcm2710.dtsi + create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4.dts + create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4s.dts + create mode 100644 arch/arm/boot/dts/bcm2711-rpi-ds.dtsi + create mode 100644 arch/arm/boot/dts/bcm271x-rpi-bt.dtsi + create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi + create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi + create mode 100644 arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi + create mode 100644 arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_28.dtsi + create mode 100644 arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_44.dtsi + create mode 100644 arch/arm/boot/dts/overlays/Makefile + create mode 100644 arch/arm/boot/dts/overlays/README + create mode 100644 arch/arm/boot/dts/overlays/act-led-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adafruit-st7735r-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adafruit18-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ads1015-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ads1115-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ads7846-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adv7282m-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/adv728x-m-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-boss2-dac-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-digione-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/anyspi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/apds9960-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/applepi-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/arducam-64mp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/arducam-pivariety-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/at86rf233-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-bare-i2s-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-isolated-soundcard-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/audremap-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/balena-fin-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/camera-mux-2port-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/camera-mux-4port-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/cap1106-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/chipdip-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/cirrus-wm5102-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/cma-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/cutiepi-panel-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dacberry400-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dht11-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dionaudio-kiwi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/disable-bt-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/disable-wifi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dpi18-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dpi18cpadhi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dpi24-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/draws-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dwc-otg-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/dwc2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/edt-ft5406-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/edt-ft5406.dtsi + create mode 100644 arch/arm/boot/dts/overlays/enc28j60-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/enc28j60-spi2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/exc3000-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/fbtft-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/fsm-demo-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gc9a01-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ghost-amp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/goodix-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-fan-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-hog-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-ir-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-ir-tx-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-key-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/gpio-led-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-no-irq-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hd44780-lcd-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hdmi-backlight-hwhack-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-amp100-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-amp3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplushd-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/highperi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hy28a-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hy28b-2017-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/hy28b-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-bcm2708-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-fan-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-mux-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-common.dtsi + create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/i2c-sensor-common.dtsi + create mode 100755 arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c5-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2c6-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2s-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/i2s-gpio28-31-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ilitek251x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx219-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx219.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx258-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx258.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx290-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx290_327-overlay.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx290_327.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx296-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx327-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx378-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx462-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx477-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/imx477_378-overlay.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx477_378.dtsi + create mode 100644 arch/arm/boot/dts/overlays/imx519-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/iqs550-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/irs1125-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/jedec-spi-nor-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/justboom-both-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/justboom-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/justboom-digi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ltc294x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/max98357a-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/maxtherm-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mbed-dac-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp23017-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp23s17-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/mcp2515-can0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp2515-can1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp2515-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp251xfd-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/mcp3008-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/mcp3202-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mcp342x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/media-center-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/merus-amp-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/midi-uart5-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/minipitft13-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mipi-dbi-spi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mlx90640-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mmc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mpu6050-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/mz61581-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov2311-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov2311.dtsi + create mode 100644 arch/arm/boot/dts/overlays/ov5647-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov5647.dtsi + create mode 100644 arch/arm/boot/dts/overlays/ov7251-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov7251.dtsi + create mode 100644 arch/arm/boot/dts/overlays/ov9281-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ov9281.dtsi + create mode 100644 arch/arm/boot/dts/overlays/overlay_map.dts + create mode 100644 arch/arm/boot/dts/overlays/papirus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pca953x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pcie-32bit-dma-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pibell-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pifacedigital-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pifi-40-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pifi-dac-hd-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pifi-dac-zero-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pifi-mini-210-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/piglow-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/piscreen-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/piscreen2r-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pisound-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft22-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft28-capacitive-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pps-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/proto-codec-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pwm-ir-tx-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/pwm-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/qca7000-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/qca7000-uart0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ramoops-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ramoops-pi4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rotary-encoder-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-backlight-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-codeczero-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-dacplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-dacpro-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-digiampplus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-ft5406-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-poe-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-poe-plus-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-sense-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-sense-v2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rpi-tv-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sainsmart18-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sc16is752-spi0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sdhost-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sdio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/seeed-can-fd-hat-v1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/seeed-can-fd-hat-v2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/si446x-spi0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/smi-dev-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/smi-nand-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/smi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi-gpio35-39-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi-gpio40-45-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi-rtc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi0-0cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi0-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi0-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi1-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi1-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi1-3cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi2-3cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi3-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi3-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi4-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi4-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi5-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi5-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi6-1cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/spi6-2cs-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ssd1306-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ssd1331-spi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/superaudioboard-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/sx150x-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tc358743-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tinylcd35-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tpm-slb9670-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/tpm-slb9673-overlay.dts + create mode 100755 arch/arm/boot/dts/overlays/uart0-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart1-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart3-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/uart5-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/udrc-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ugreen-dabboard-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/upstream-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/upstream-pi4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-fkms-v3d-pi4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-generic-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-hyperpixel.dtsi + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-hyperpixel2r-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-hyperpixel4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-hyperpixel4sq-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-panel-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi.dtsi + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dsi-7inch-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dsi-lt070me05000-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dsi-lt070me05000-v2-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-v3d-pi4-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-vga666-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vga666-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/vl805-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/w1-gpio-pullup-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/w5500-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/watterott-display-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/waveshare-can-fd-hat-mode-a-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/waveshare-can-fd-hat-mode-b-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/wittypi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/wm8960-soundcard-overlay.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-2-b.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-3-b.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-zero-2-w.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-zero-2.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4.dts + create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4s.dts + create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-csi1-2lane.dtsi + create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi + create mode 120000 arch/arm64/boot/dts/overlays + create mode 100644 include/dt-bindings/gpio/gpio-fsm.h + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 6aa7dc4db2fc..f7d8d09c0a16 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -1,4 +1,25 @@ + # SPDX-License-Identifier: GPL-2.0 ++ ++dtb-$(CONFIG_ARCH_BCM2835) += \ ++ bcm2708-rpi-b.dtb \ ++ bcm2708-rpi-b-rev1.dtb \ ++ bcm2708-rpi-b-plus.dtb \ ++ bcm2708-rpi-cm.dtb \ ++ bcm2708-rpi-zero.dtb \ ++ bcm2708-rpi-zero-w.dtb \ ++ bcm2710-rpi-zero-2.dtb \ ++ bcm2710-rpi-zero-2-w.dtb \ ++ bcm2709-rpi-2-b.dtb \ ++ bcm2710-rpi-2-b.dtb \ ++ bcm2710-rpi-3-b.dtb \ ++ bcm2710-rpi-3-b-plus.dtb \ ++ bcm2711-rpi-4-b.dtb \ ++ bcm2711-rpi-400.dtb \ ++ bcm2709-rpi-cm2.dtb \ ++ bcm2710-rpi-cm3.dtb \ ++ bcm2711-rpi-cm4.dtb \ ++ bcm2711-rpi-cm4s.dtb ++ + dtb-$(CONFIG_ARCH_ALPINE) += \ + alpine-db.dtb + dtb-$(CONFIG_MACH_ARTPEC6) += \ +@@ -1633,3 +1654,13 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ + aspeed-bmc-vegman-n110.dtb \ + aspeed-bmc-vegman-rx20.dtb \ + aspeed-bmc-vegman-sx20.dtb ++ ++targets += dtbs dtbs_install ++targets += $(dtb-y) ++ ++subdir-y := overlays ++ ++# Enable fixups to support overlays on BCM2835 platforms ++ifeq ($(CONFIG_ARCH_BCM2835),y) ++ DTC_FLAGS += -@ ++endif +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +new file mode 100644 +index 000000000000..b3b18a7b5fe9 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts +@@ -0,0 +1,200 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; ++ model = "Raspberry Pi Model B+"; ++}; ++ ++&gpio { ++ /* ++ * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf ++ * RPI-BPLUS sheet 1 ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "SDA0", ++ "SCL0", ++ "NC", /* GPIO30 */ ++ "LAN_RUN", /* GPIO31 */ ++ "CAM_GPIO1", /* GPIO32 */ ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "PWR_LOW_N", /* GPIO35 */ ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "USB_LIMIT", /* GPIO38 */ ++ "NC", /* GPIO39 */ ++ "PWM0_OUT", /* GPIO40 */ ++ "CAM_GPIO0", /* GPIO41 */ ++ "NC", /* GPIO42 */ ++ "NC", /* GPIO43 */ ++ "ETH_CLK", /* GPIO44 */ ++ "PWM1_OUT", /* GPIO45 */ ++ "HDMI_HPD_N", ++ "STATUS_LED", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++ ++ pwr_led: led-pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&gpio 35 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts b/arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts +new file mode 100644 +index 000000000000..50ac75e8d3d9 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-b-rev1.dts +@@ -0,0 +1,208 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-smsc9512.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-b", "brcm,bcm2835"; ++ model = "Raspberry Pi Model B"; ++}; ++ ++&gpio { ++ /* ++ * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf ++ * RPI00021 sheet 02 ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "SDA0", ++ "SCL0", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "CAM_GPIO1", ++ "LAN_RUN", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "NC", /* GPIO12 */ ++ "NC", /* GPIO13 */ ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "STATUS_LED_N", ++ "GPIO17", ++ "GPIO18", ++ "NC", /* GPIO19 */ ++ "NC", /* GPIO20 */ ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "NC", /* GPIO26 */ ++ "CAM_GPIO0", ++ /* Binary number representing build/revision */ ++ "CONFIG0", ++ "CONFIG1", ++ "CONFIG2", ++ "CONFIG3", ++ "NC", /* GPIO32 */ ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "NC", /* GPIO35 */ ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "NC", /* GPIO38 */ ++ "NC", /* GPIO39 */ ++ "PWM0_OUT", ++ "NC", /* GPIO41 */ ++ "NC", /* GPIO42 */ ++ "NC", /* GPIO43 */ ++ "NC", /* GPIO44 */ ++ "PWM1_OUT", ++ "HDMI_HPD_P", ++ "SD_CARD_DET", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = <6>; /* alt2 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++/delete-node/ &i2c0mux; ++ ++i2c0: &i2c0if { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ clock-frequency = <100000>; ++}; ++ ++i2c_csi_dsi: &i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++/ { ++ aliases { ++ i2c0 = &i2c0; ++ }; ++ ++ /* Provide an i2c0mux label to avoid undefined symbols in overlays */ ++ i2c0mux: i2c0mux { ++ }; ++ ++ __overrides__ { ++ i2c0 = <&i2c0>, "status"; ++ }; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 16 1>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 27 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts +new file mode 100644 +index 000000000000..4d7444a31bb6 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts +@@ -0,0 +1,190 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-smsc9512.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-b", "brcm,bcm2835"; ++ model = "Raspberry Pi Model B"; ++}; ++ ++&gpio { ++ /* ++ * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf ++ * RPI00022 sheet 02 ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "SDA0", ++ "SCL0", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "CAM_GPIO1", ++ "LAN_RUN", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "NC", /* GPIO12 */ ++ "NC", /* GPIO13 */ ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "STATUS_LED_N", ++ "GPIO17", ++ "GPIO18", ++ "NC", /* GPIO19 */ ++ "NC", /* GPIO20 */ ++ "CAM_GPIO0", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "NC", /* GPIO26 */ ++ "GPIO27", ++ "GPIO28", ++ "GPIO29", ++ "GPIO30", ++ "GPIO31", ++ "NC", /* GPIO32 */ ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "NC", /* GPIO35 */ ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "NC", /* GPIO38 */ ++ "NC", /* GPIO39 */ ++ "PWM0_OUT", ++ "NC", /* GPIO41 */ ++ "NC", /* GPIO42 */ ++ "NC", /* GPIO43 */ ++ "NC", /* GPIO44 */ ++ "PWM1_OUT", ++ "HDMI_HPD_P", ++ "SD_CARD_DET", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <28 29 30 31>; ++ brcm,function = <6>; /* alt2 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 16 1>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 21 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-bt.dtsi b/arch/arm/boot/dts/bcm2708-rpi-bt.dtsi +new file mode 100644 +index 000000000000..a18f80af97d3 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-bt.dtsi +@@ -0,0 +1,26 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++&uart0 { ++ bt: bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <3000000>; ++ shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++ }; ++}; ++ ++&uart1 { ++ minibt: bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <460800>; ++ shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++ }; ++}; ++ ++/ { ++ __overrides__ { ++ krnbt = <&bt>,"status"; ++ krnbt_baudrate = <&bt>,"max-speed:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-cm.dts b/arch/arm/boot/dts/bcm2708-rpi-cm.dts +new file mode 100644 +index 000000000000..6a97189afe58 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts +@@ -0,0 +1,171 @@ ++/dts-v1/; ++ ++#include "bcm2708-rpi-cm.dtsi" ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++ ++/ { ++ compatible = "raspberrypi,compute-module", "brcm,bcm2835"; ++ model = "Raspberry Pi Compute Module"; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 2 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++cam0_reg: &cam0_regulator { ++ gpio = <&gpio 30 GPIO_ACTIVE_HIGH>; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "GPIO0", ++ "GPIO1", ++ "GPIO2", ++ "GPIO3", ++ "GPIO4", ++ "GPIO5", ++ "GPIO6", ++ "GPIO7", ++ "GPIO8", ++ "GPIO9", ++ "GPIO10", ++ "GPIO11", ++ "GPIO12", ++ "GPIO13", ++ "GPIO14", ++ "GPIO15", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "GPIO28", ++ "GPIO29", ++ "GPIO30", ++ "GPIO31", ++ "GPIO32", ++ "GPIO33", ++ "GPIO34", ++ "GPIO35", ++ "GPIO36", ++ "GPIO37", ++ "GPIO38", ++ "GPIO39", ++ "GPIO40", ++ "GPIO41", ++ "GPIO42", ++ "GPIO43", ++ "GPIO44", ++ "GPIO45", ++ "HDMI_HPD_N", ++ /* Also used as ACT LED */ ++ "EMMC_EN_N", ++ /* Used by eMMC */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins; ++ brcm,function; ++ }; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi +new file mode 100644 +index 000000000000..c7845d2ba7ff +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi +@@ -0,0 +1,22 @@ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++}; ++ ++/ { ++ __overrides__ { ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ cam0_reg = <&cam0_reg>,"status"; ++ cam0_reg_gpio = <&cam0_reg>,"gpio:4"; ++ cam1_reg = <&cam1_reg>,"status"; ++ cam1_reg_gpio = <&cam1_reg>,"gpio:4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts +new file mode 100644 +index 000000000000..323fa2ebf730 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts +@@ -0,0 +1,246 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++#include "bcm2708-rpi-bt.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; ++ model = "Raspberry Pi Zero W"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc1 = &mmcnr; ++ }; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "SDA0", ++ "SCL0", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ "CAM_GPIO1", /* GPIO40 */ ++ "WL_ON", /* GPIO41 */ ++ "NC", /* GPIO42 */ ++ "WIFI_CLK", /* GPIO43 */ ++ "CAM_GPIO0", /* GPIO44 */ ++ "BT_ON", /* GPIO45 */ ++ "HDMI_HPD_N", ++ "STATUS_LED_N", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; /* ALT3 = SD1 */ ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; /* none */ ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <30 31 32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <2 0 0 2>; /* up none none up */ ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "actpwr"; ++ gpios = <&gpio 47 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 44 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi-zero.dts b/arch/arm/boot/dts/bcm2708-rpi-zero.dts +new file mode 100644 +index 000000000000..406f945d4093 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts +@@ -0,0 +1,187 @@ ++/dts-v1/; ++ ++#include "bcm2708.dtsi" ++#include "bcm2708-rpi.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-zero", "brcm,bcm2835"; ++ model = "Raspberry Pi Zero"; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "SDA0", ++ "SCL0", ++ "NC", /* GPIO30 */ ++ "NC", /* GPIO31 */ ++ "CAM_GPIO1", /* GPIO32 */ ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "NC", /* GPIO35 */ ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "NC", /* GPIO38 */ ++ "NC", /* GPIO39 */ ++ "NC", /* GPIO40 */ ++ "CAM_GPIO0", /* GPIO41 */ ++ "NC", /* GPIO42 */ ++ "NC", /* GPIO43 */ ++ "NC", /* GPIO44 */ ++ "NC", /* GPIO45 */ ++ "HDMI_HPD_N", ++ "STATUS_LED_N", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "actpwr"; ++ gpios = <&gpio 47 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi +new file mode 100644 +index 000000000000..f774eda1ae55 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -0,0 +1,40 @@ ++/* Downstream modifications common to bcm2835, bcm2836, bcm2837 */ ++ ++#define i2c0 i2c0mux ++#include "bcm2835-rpi.dtsi" ++#undef i2c0 ++#include "bcm270x-rpi.dtsi" ++ ++/ { ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x0>; ++ }; ++ ++ aliases { ++ i2c2 = &i2c2; ++ }; ++ ++ __overrides__ { ++ hdmi = <&hdmi>,"status"; ++ i2c2_iknowwhatimdoing = <&i2c2>,"status"; ++ i2c2_baudrate = <&i2c2>,"clock-frequency:0"; ++ sd = <&sdhost>,"status"; ++ sd_poll_once = <&sdhost>,"non-removable?"; ++ }; ++}; ++ ++&sdhost { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdhost_gpio48>; ++ status = "okay"; ++}; ++ ++&hdmi { ++ power-domains = <&power RPI_POWER_DOMAIN_HDMI>; ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/bcm2708.dtsi b/arch/arm/boot/dts/bcm2708.dtsi +new file mode 100644 +index 000000000000..b3cf34cdcc0e +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2708.dtsi +@@ -0,0 +1,18 @@ ++#define i2c0 i2c0if ++#include "bcm2835.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++ ++/ { ++ __overrides__ { ++ arm_freq; ++ }; ++}; ++ ++&soc { ++ dma-ranges = <0x80000000 0x00000000 0x20000000>; ++}; ++ ++&vc4 { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +new file mode 100644 +index 000000000000..c6220e6d5fbc +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts +@@ -0,0 +1,200 @@ ++/dts-v1/; ++ ++#include "bcm2709.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++ ++/ { ++ compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; ++ model = "Raspberry Pi 2 Model B"; ++}; ++ ++&gpio { ++ /* ++ * Taken from rpi_SCH_2b_1p2_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "SDA0", ++ "SCL0", ++ "NC", /* GPIO30 */ ++ "LAN_RUN", ++ "CAM_GPIO1", ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "PWR_LOW_N", ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "USB_LIMIT", ++ "NC", /* GPIO39 */ ++ "PWM0_OUT", ++ "CAM_GPIO0", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ "ETH_CLK", ++ "PWM1_OUT", ++ "HDMI_HPD_N", ++ "STATUS_LED", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++ ++ pwr_led: led-pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&gpio 35 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2709-rpi-cm2.dts b/arch/arm/boot/dts/bcm2709-rpi-cm2.dts +new file mode 100644 +index 000000000000..c9e47c46f4f7 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2709-rpi-cm2.dts +@@ -0,0 +1,221 @@ ++/dts-v1/; ++ ++#include "bcm2709.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++ ++/ { ++ compatible = "raspberrypi,2-compute-module", "brcm,bcm2836"; ++ model = "Raspberry Pi Compute Module 2"; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 2 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++cam0_reg: &cam0_regulator { ++ gpio = <&gpio 30 GPIO_ACTIVE_HIGH>; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "GPIO0", ++ "GPIO1", ++ "GPIO2", ++ "GPIO3", ++ "GPIO4", ++ "GPIO5", ++ "GPIO6", ++ "GPIO7", ++ "GPIO8", ++ "GPIO9", ++ "GPIO10", ++ "GPIO11", ++ "GPIO12", ++ "GPIO13", ++ "GPIO14", ++ "GPIO15", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "GPIO28", ++ "GPIO29", ++ "GPIO30", ++ "GPIO31", ++ "GPIO32", ++ "GPIO33", ++ "GPIO34", ++ "GPIO35", ++ "GPIO36", ++ "GPIO37", ++ "GPIO38", ++ "GPIO39", ++ "GPIO40", ++ "GPIO41", ++ "GPIO42", ++ "GPIO43", ++ "GPIO44", ++ "GPIO45", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ /* Used by eMMC */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins; ++ brcm,function; ++ }; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ ++}; ++ ++&firmware { ++ expgpio: expgpio { ++ compatible = "raspberrypi,firmware-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-line-names = "HDMI_HPD_N", ++ "EMMC_EN_N", ++ "NC", ++ "NC", ++ "NC", ++ "NC", ++ "NC", ++ "NC"; ++ status = "okay"; ++ }; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&virtgpio 0 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ cam0_reg = <&cam0_reg>,"status"; ++ cam0_reg_gpio = <&cam0_reg>,"gpio:4"; ++ cam1_reg = <&cam1_reg>,"status"; ++ cam1_reg_gpio = <&cam1_reg>,"gpio:4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2709-rpi.dtsi b/arch/arm/boot/dts/bcm2709-rpi.dtsi +new file mode 100644 +index 000000000000..babfa41cd9f7 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2709-rpi.dtsi +@@ -0,0 +1,5 @@ ++#include "bcm2708-rpi.dtsi" ++ ++&vchiq { ++ compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq"; ++}; +diff --git a/arch/arm/boot/dts/bcm2709.dtsi b/arch/arm/boot/dts/bcm2709.dtsi +new file mode 100644 +index 000000000000..e195f7247813 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2709.dtsi +@@ -0,0 +1,24 @@ ++#define i2c0 i2c0if ++#include "bcm2836.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++ ++/ { ++ soc { ++ ranges = <0x7e000000 0x3f000000 0x01000000>, ++ <0x40000000 0x40000000 0x00040000>; ++ ++ /delete-node/ timer@7e003000; ++ }; ++ ++ __overrides__ { ++ arm_freq = <&v7_cpu0>, "clock-frequency:0", ++ <&v7_cpu1>, "clock-frequency:0", ++ <&v7_cpu2>, "clock-frequency:0", ++ <&v7_cpu3>, "clock-frequency:0"; ++ }; ++}; ++ ++&vc4 { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/bcm270x-rpi.dtsi b/arch/arm/boot/dts/bcm270x-rpi.dtsi +new file mode 100644 +index 000000000000..1401d7b261f8 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm270x-rpi.dtsi +@@ -0,0 +1,177 @@ ++/* Downstream modifications to bcm2835-rpi.dtsi */ ++ ++/ { ++ aliases { ++ aux = &aux; ++ sound = &sound; ++ soc = &soc; ++ dma = &dma; ++ intc = &intc; ++ watchdog = &watchdog; ++ random = &random; ++ mailbox = &mailbox; ++ gpio = &gpio; ++ uart0 = &uart0; ++ uart1 = &uart1; ++ sdhost = &sdhost; ++ mmc = &mmc; ++ mmc1 = &mmc; ++ mmc0 = &sdhost; ++ i2s = &i2s; ++ i2c0 = &i2c0; ++ i2c1 = &i2c1; ++ i2c10 = &i2c_csi_dsi; ++ spi0 = &spi0; ++ spi1 = &spi1; ++ spi2 = &spi2; ++ usb = &usb; ++ leds = &leds; ++ fb = &fb; ++ thermal = &thermal; ++ axiperf = &axiperf; ++ }; ++ ++ /* Define these notional regulators for use by overlays */ ++ vdd_3v3_reg: fixedregulator_3v3 { ++ compatible = "regulator-fixed"; ++ regulator-always-on; ++ regulator-max-microvolt = <3300000>; ++ regulator-min-microvolt = <3300000>; ++ regulator-name = "3v3"; ++ }; ++ ++ vdd_5v0_reg: fixedregulator_5v0 { ++ compatible = "regulator-fixed"; ++ regulator-always-on; ++ regulator-max-microvolt = <5000000>; ++ regulator-min-microvolt = <5000000>; ++ regulator-name = "5v0"; ++ }; ++ ++ leds: leds { ++ compatible = "gpio-leds"; ++ }; ++ ++ soc { ++ gpiomem { ++ compatible = "brcm,bcm2835-gpiomem"; ++ reg = <0x7e200000 0x1000>; ++ }; ++ ++ fb: fb { ++ compatible = "brcm,bcm2708-fb"; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ ++ /* External sound card */ ++ sound: sound { ++ status = "disabled"; ++ }; ++ }; ++ ++ __overrides__ { ++ cache_line_size; ++ ++ uart0 = <&uart0>,"status"; ++ uart1 = <&uart1>,"status"; ++ i2s = <&i2s>,"status"; ++ spi = <&spi0>,"status"; ++ i2c0 = <&i2c0if>,"status",<&i2c0mux>,"status"; ++ i2c1 = <&i2c1>,"status"; ++ i2c0_baudrate = <&i2c0if>,"clock-frequency:0"; ++ i2c1_baudrate = <&i2c1>,"clock-frequency:0"; ++ ++ watchdog = <&watchdog>,"status"; ++ random = <&random>,"status"; ++ sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_force_pio = <&sdhost>,"brcm,force-pio?"; ++ sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; ++ sd_debug = <&sdhost>,"brcm,debug"; ++ sdio_overclock = <&mmc>,"brcm,overclock-50:0", ++ <&mmcnr>,"brcm,overclock-50:0"; ++ axiperf = <&axiperf>,"status"; ++ }; ++}; ++ ++&uart0 { ++ skip-init; ++}; ++ ++&uart1 { ++ skip-init; ++}; ++ ++&txp { ++ status = "disabled"; ++}; ++ ++&i2c0if { ++ status = "disabled"; ++}; ++ ++&i2c0mux { ++ pinctrl-names = "i2c0", "i2c_csi_dsi"; ++ /delete-property/ clock-frequency; ++ status = "disabled"; ++}; ++ ++&i2c1 { ++ status = "disabled"; ++}; ++ ++&clocks { ++ firmware = <&firmware>; ++}; ++ ++&sdhci { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_gpio48>; ++ bus-width = <4>; ++}; ++ ++&cpu_thermal { ++ // Add some labels ++ thermal_trips: trips { ++ cpu-crit { ++ // Raise upstream limit of 90C ++ temperature = <110000>; ++ }; ++ }; ++ cooling_maps: cooling-maps { ++ }; ++}; ++ ++&vec { ++ clocks = <&firmware_clocks 15>; ++ status = "disabled"; ++}; ++ ++&firmware { ++#ifndef BCM2711 ++ firmware_clocks: clocks { ++ compatible = "raspberrypi,firmware-clocks"; ++ #clock-cells = <1>; ++ }; ++#endif ++ ++ vcio: vcio { ++ compatible = "raspberrypi,vcio"; ++ }; ++}; ++ ++&vc4 { ++ raspberrypi,firmware = <&firmware>; ++}; ++ ++#ifndef BCM2711 ++ ++&hdmi { ++ reg-names = "hdmi", ++ "hd"; ++ clocks = <&firmware_clocks 9>, ++ <&firmware_clocks 13>; ++ dmas = <&dma (17|(1<<27)|(1<<24))>; ++}; ++ ++#endif +diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi +new file mode 100644 +index 000000000000..bb8e7a9d1b22 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm270x.dtsi +@@ -0,0 +1,294 @@ ++/* Downstream bcm283x.dtsi diff */ ++#include ++ ++/ { ++ chosen: chosen { ++ // Disable audio by default ++ bootargs = "coherent_pool=1M snd_bcm2835.enable_headphones=0"; ++ /delete-property/ stdout-path; ++ }; ++ ++ soc: soc { ++ watchdog: watchdog@7e100000 { ++ /* Add label */ ++ }; ++ ++ random: rng@7e104000 { ++ /* Add label */ ++ }; ++ ++ spi0: spi@7e204000 { ++ /* Add label */ ++ }; ++ ++#ifndef BCM2711 ++ pixelvalve0: pixelvalve@7e206000 { ++ /* Add label */ ++ status = "disabled"; ++ }; ++ ++ pixelvalve1: pixelvalve@7e207000 { ++ /* Add label */ ++ status = "disabled"; ++ }; ++#endif ++ ++ /delete-node/ mmc@7e300000; ++ ++ sdhci: mmc: mmc@7e300000 { ++ compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; ++ reg = <0x7e300000 0x100>; ++ interrupts = <2 30>; ++ clocks = <&clocks BCM2835_CLOCK_EMMC>; ++ dmas = <&dma 11>; ++ dma-names = "rx-tx"; ++ brcm,overclock-50 = <0>; ++ status = "disabled"; ++ }; ++ ++ /* A clone of mmc but with non-removable set */ ++ mmcnr: mmcnr@7e300000 { ++ compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; ++ reg = <0x7e300000 0x100>; ++ interrupts = <2 30>; ++ clocks = <&clocks BCM2835_CLOCK_EMMC>; ++ dmas = <&dma 11>; ++ dma-names = "rx-tx"; ++ brcm,overclock-50 = <0>; ++ non-removable; ++ status = "disabled"; ++ }; ++ ++ hvs: hvs@7e400000 { ++ /* Add label */ ++ status = "disabled"; ++ }; ++ ++ firmwarekms: firmwarekms@7e600000 { ++ compatible = "raspberrypi,rpi-firmware-kms"; ++ /* SMI interrupt reg */ ++ reg = <0x7e600000 0x100>; ++ interrupts = <2 16>; ++ brcm,firmware = <&firmware>; ++ status = "disabled"; ++ }; ++ ++ smi: smi@7e600000 { ++ compatible = "brcm,bcm2835-smi"; ++ reg = <0x7e600000 0x100>; ++ interrupts = <2 16>; ++ clocks = <&clocks BCM2835_CLOCK_SMI>; ++ assigned-clocks = <&clocks BCM2835_CLOCK_SMI>; ++ assigned-clock-rates = <125000000>; ++ dmas = <&dma 4>; ++ dma-names = "rx-tx"; ++ status = "disabled"; ++ }; ++ ++ csi0: csi@7e800000 { ++ compatible = "brcm,bcm2835-unicam"; ++ reg = <0x7e800000 0x800>, ++ <0x7e802000 0x4>; ++ interrupts = <2 6>; ++ clocks = <&clocks BCM2835_CLOCK_CAM0>, ++ <&firmware_clocks 4>; ++ clock-names = "lp", "vpu"; ++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ status = "disabled"; ++ }; ++ ++ csi1: csi@7e801000 { ++ compatible = "brcm,bcm2835-unicam"; ++ reg = <0x7e801000 0x800>, ++ <0x7e802004 0x4>; ++ interrupts = <2 7>; ++ clocks = <&clocks BCM2835_CLOCK_CAM1>, ++ <&firmware_clocks 4>; ++ clock-names = "lp", "vpu"; ++ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ #clock-cells = <1>; ++ status = "disabled"; ++ }; ++ ++#ifndef BCM2711 ++ pixelvalve2: pixelvalve@7e807000 { ++ /* Add label */ ++ status = "disabled"; ++ }; ++#endif ++ ++ hdmi@7e902000 { /* hdmi */ ++ status = "disabled"; ++ }; ++ ++ usb@7e980000 { /* usb */ ++ compatible = "brcm,bcm2708-usb"; ++ reg = <0x7e980000 0x10000>, ++ <0x7e006000 0x1000>; ++ interrupt-names = "usb", ++ "soft"; ++ interrupts = <1 9>, ++ <2 0>; ++ }; ++ ++#ifndef BCM2711 ++ v3d@7ec00000 { /* vd3 */ ++ compatible = "brcm,vc4-v3d"; ++ power-domains = <&power RPI_POWER_DOMAIN_V3D>; ++ status = "disabled"; ++ }; ++#endif ++ ++ axiperf: axiperf { ++ compatible = "brcm,bcm2835-axiperf"; ++ reg = <0x7e009800 0x100>, ++ <0x7ee08000 0x100>; ++ firmware = <&firmware>; ++ status = "disabled"; ++ }; ++ ++ i2c0mux: i2c0mux { ++ compatible = "i2c-mux-pinctrl"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c-parent = <&i2c0if>; ++ ++ status = "disabled"; ++ ++ i2c0: i2c@0 { ++ reg = <0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ i2c_csi_dsi: i2c@1 { ++ reg = <1>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ }; ++ }; ++ ++ cam1_reg: cam1_regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "cam1-reg"; ++ enable-active-high; ++ /* Needs to be enabled, as removing a regulator is very unsafe */ ++ status = "okay"; ++ }; ++ ++ cam1_clk: cam1_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ cam0_regulator: cam0_regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "cam0-reg"; ++ enable-active-high; ++ status = "disabled"; ++ }; ++ ++ cam0_clk: cam0_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ cam_dummy_reg: cam_dummy_reg { ++ compatible = "regulator-fixed"; ++ regulator-name = "cam-dummy-reg"; ++ status = "okay"; ++ }; ++ ++ __overrides__ { ++ cam0-pwdn-ctrl; ++ cam0-pwdn; ++ cam0-led-ctrl; ++ cam0-led; ++ }; ++}; ++ ++&gpio { ++ interrupts = <2 17>, <2 18>; ++ ++ dpi_18bit_cpadhi_gpio0: dpi_18bit_cpadhi_gpio0 { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 ++ 12 13 14 15 16 17 ++ 20 21 22 23 24 25>; ++ brcm,function = ; ++ brcm,pull = <0>; /* no pull */ ++ }; ++ dpi_18bit_cpadhi_gpio2: dpi_18bit_cpadhi_gpio2 { ++ brcm,pins = <2 3 4 5 6 7 8 9 ++ 12 13 14 15 16 17 ++ 20 21 22 23 24 25>; ++ brcm,function = ; ++ }; ++ dpi_18bit_gpio0: dpi_18bit_gpio0 { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19 ++ 20 21>; ++ brcm,function = ; ++ }; ++ dpi_18bit_gpio2: dpi_18bit_gpio2 { ++ brcm,pins = <2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19 ++ 20 21>; ++ brcm,function = ; ++ }; ++ dpi_16bit_gpio0: dpi_16bit_gpio0 { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19>; ++ brcm,function = ; ++ }; ++ dpi_16bit_gpio2: dpi_16bit_gpio2 { ++ brcm,pins = <2 3 4 5 6 7 8 9 10 11 ++ 12 13 14 15 16 17 18 19>; ++ brcm,function = ; ++ }; ++ dpi_16bit_cpadhi_gpio0: dpi_16bit_cpadhi_gpio0 { ++ brcm,pins = <0 1 2 3 4 5 6 7 8 ++ 12 13 14 15 16 17 ++ 20 21 22 23 24>; ++ brcm,function = ; ++ }; ++ dpi_16bit_cpadhi_gpio2: dpi_16bit_cpadhi_gpio2 { ++ brcm,pins = <2 3 4 5 6 7 8 ++ 12 13 14 15 16 17 ++ 20 21 22 23 24>; ++ brcm,function = ; ++ }; ++}; ++ ++&uart0 { ++ /* Enable CTS bug workaround */ ++ cts-event-workaround; ++}; ++ ++&i2s { ++ #sound-dai-cells = <0>; ++ dmas = <&dma 2>, <&dma 3>; ++ dma-names = "tx", "rx"; ++}; ++ ++&sdhost { ++ dmas = <&dma (13|(1<<29))>; ++ dma-names = "rx-tx"; ++ bus-width = <4>; ++ brcm,overclock-50 = <0>; ++ brcm,pio-limit = <1>; ++ firmware = <&firmware>; ++}; ++ ++&spi0 { ++ dmas = <&dma 6>, <&dma 7>; ++ dma-names = "tx", "rx"; ++}; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-2-b.dts b/arch/arm/boot/dts/bcm2710-rpi-2-b.dts +new file mode 100644 +index 000000000000..c77ff30aa738 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-2-b.dts +@@ -0,0 +1,200 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++ ++/ { ++ compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837"; ++ model = "Raspberry Pi 2 Model B rev 1.2"; ++}; ++ ++&gpio { ++ /* ++ * Taken from rpi_SCH_2b_1p2_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD0", ++ "RXD0", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "SDA0", ++ "SCL0", ++ "NC", /* GPIO30 */ ++ "LAN_RUN", ++ "CAM_GPIO1", ++ "NC", /* GPIO33 */ ++ "NC", /* GPIO34 */ ++ "PWR_LOW_N", ++ "NC", /* GPIO36 */ ++ "NC", /* GPIO37 */ ++ "USB_LIMIT", ++ "NC", /* GPIO39 */ ++ "PWM0_OUT", ++ "CAM_GPIO0", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ "ETH_CLK", ++ "PWM1_OUT", ++ "HDMI_HPD_N", ++ "STATUS_LED", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 45>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 47 0>; ++ }; ++ ++ pwr_led: led-pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&gpio 35 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts +new file mode 100644 +index 000000000000..04621bd197c3 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts +@@ -0,0 +1,289 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-lan7515.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++#include "bcm271x-rpi-bt.dtsi" ++ ++/ { ++ compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; ++ model = "Raspberry Pi 3 Model B+"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc1 = &mmcnr; ++ }; ++}; ++ ++&gpio { ++ /* ++ * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "HDMI_HPD_N", ++ "STATUS_LED_G", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ "PWM0_OUT", ++ "PWM1_OUT", ++ "ETH_CLK", ++ "WIFI_CLK", ++ "SDA0", ++ "SCL0", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 41>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ }; ++}; ++ ++&firmware { ++ expgpio: expgpio { ++ compatible = "raspberrypi,firmware-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-line-names = "BT_ON", ++ "WL_ON", ++ "PWR_LED_R", ++ "LAN_RUN", ++ "NC", ++ "CAM_GPIO0", ++ "CAM_GPIO1", ++ "NC"; ++ status = "okay"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 29 0>; ++ }; ++ ++ pwr_led: led-pwr { ++ label = "led1"; ++ linux,default-trigger = "default-on"; ++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++ð_phy { ++ microchip,eee-enabled; ++ microchip,tx-lpi-timer = <600>; /* non-aggressive*/ ++ microchip,downshift-after = <2>; ++}; ++ ++&cam1_reg { ++ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ ++ eee = <ð_phy>,"microchip,eee-enabled?"; ++ tx_lpi_timer = <ð_phy>,"microchip,tx-lpi-timer:0"; ++ eth_led0 = <ð_phy>,"microchip,led-modes:0"; ++ eth_led1 = <ð_phy>,"microchip,led-modes:4"; ++ eth_downshift_after = <ð_phy>,"microchip,downshift-after:0"; ++ eth_max_speed = <ð_phy>,"max-speed:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +new file mode 100644 +index 000000000000..e0b233562c03 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts +@@ -0,0 +1,291 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++#include "bcm271x-rpi-bt.dtsi" ++ ++/ { ++ compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; ++ model = "Raspberry Pi 3 Model B"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc1 = &mmcnr; ++ }; ++}; ++ ++&gpio { ++ /* ++ * Taken from rpi_SCH_3b_1p2_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "NC", /* GPIO 28 */ ++ "LAN_RUN_BOOT", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ "PWM0_OUT", ++ "PWM1_OUT", ++ "ETH_CLK", ++ "WIFI_CLK", ++ "SDA0", ++ "SCL0", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <40 41>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ }; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ ++}; ++ ++&firmware { ++ expgpio: expgpio { ++ compatible = "raspberrypi,firmware-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-line-names = "BT_ON", ++ "WL_ON", ++ "STATUS_LED", ++ "LAN_RUN", ++ "HDMI_HPD_N", ++ "CAM_GPIO0", ++ "CAM_GPIO1", ++ "PWR_LOW_N"; ++ status = "okay"; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&bt { ++ max-speed = <921600>; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&virtgpio 0 0>; ++ }; ++ ++ pwr_led: led-pwr { ++ label = "led1"; ++ linux,default-trigger = "input"; ++ gpios = <&expgpio 7 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +new file mode 100644 +index 000000000000..5b9b44e0f30e +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts +@@ -0,0 +1,220 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++/ { ++ compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; ++ model = "Raspberry Pi Compute Module 3"; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 2 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++cam0_reg: &cam0_regulator { ++ gpio = <&gpio 30 GPIO_ACTIVE_HIGH>; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "GPIO0", ++ "GPIO1", ++ "GPIO2", ++ "GPIO3", ++ "GPIO4", ++ "GPIO5", ++ "GPIO6", ++ "GPIO7", ++ "GPIO8", ++ "GPIO9", ++ "GPIO10", ++ "GPIO11", ++ "GPIO12", ++ "GPIO13", ++ "GPIO14", ++ "GPIO15", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "GPIO28", ++ "GPIO29", ++ "GPIO30", ++ "GPIO31", ++ "GPIO32", ++ "GPIO33", ++ "GPIO34", ++ "GPIO35", ++ "GPIO36", ++ "GPIO37", ++ "GPIO38", ++ "GPIO39", ++ "GPIO40", ++ "GPIO41", ++ "GPIO42", ++ "GPIO43", ++ "GPIO44", ++ "GPIO45", ++ "SMPS_SCL", ++ "SMPS_SDA", ++ /* Used by eMMC */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins; ++ brcm,function; ++ }; ++}; ++ ++&soc { ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ ++}; ++ ++&firmware { ++ expgpio: expgpio { ++ compatible = "raspberrypi,firmware-gpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ gpio-line-names = "HDMI_HPD_N", ++ "EMMC_EN_N", ++ "NC", ++ "NC", ++ "NC", ++ "NC", ++ "NC", ++ "NC"; ++ status = "okay"; ++ }; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&virtgpio 0 0>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ cam0_reg = <&cam0_reg>,"status"; ++ cam0_reg_gpio = <&cam0_reg>,"gpio:4"; ++ cam1_reg = <&cam1_reg>,"status"; ++ cam1_reg_gpio = <&cam1_reg>,"gpio:4"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts +new file mode 100644 +index 000000000000..6522d2aa3d52 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-zero-2-w.dts +@@ -0,0 +1,267 @@ ++/dts-v1/; ++ ++#include "bcm2710.dtsi" ++#include "bcm2709-rpi.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++#include "bcm2708-rpi-bt.dtsi" ++ ++/ { ++ compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837"; ++ model = "Raspberry Pi Zero 2 W"; ++ ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc1 = &mmcnr; ++ }; ++}; ++ ++&gpio { ++ /* ++ * This is based on the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "NC" = not connected (no rail from the SoC) ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "HDMI_HPD_N", ++ "STATUS_LED_N", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ "CAM_GPIO1", /* GPIO40 */ ++ "WL_ON", /* GPIO41 */ ++ "BT_ON", /* GPIO42 */ ++ "WIFI_CLK", /* GPIO43 */ ++ "SDA0", /* GPIO44 */ ++ "SCL0", /* GPIO45 */ ++ "SMPS_SCL", /* GPIO46 */ ++ "SMPS_SDA", /* GPIO47 */ ++ /* Used by SD Card */ ++ "SD_CLK_R", ++ "SD_CMD_R", ++ "SD_DATA0_R", ++ "SD_DATA1_R", ++ "SD_DATA2_R", ++ "SD_DATA3_R"; ++ ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = <1>; /* output */ ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = <4>; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = <4>; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = <4>; /* alt0 */ ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = <7>; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = <43>; ++ brcm,function = <4>; /* alt0:GPCLK2 */ ++ brcm,pull = <0>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <30 31 32 33>; ++ brcm,function = <7>; /* alt3=UART0 */ ++ brcm,pull = <2 0 0 2>; /* up none none up */ ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ ++ firmwares { ++ fw_43436p { ++ chipid = <43430>; ++ revmask = <4>; ++ fw_base = "brcm/brcmfmac43436-sdio"; ++ }; ++ fw_43436s { ++ chipid = <43430>; ++ revmask = <2>; ++ fw_base = "brcm/brcmfmac43436s-sdio"; ++ }; ++ }; ++ }; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "actpwr"; ++ gpios = <&gpio 29 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&hdmi { ++ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&bt { ++ shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++}; ++ ++&minibt { ++ shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 40 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2710-rpi-zero-2.dts b/arch/arm/boot/dts/bcm2710-rpi-zero-2.dts +new file mode 100644 +index 000000000000..daa12bd30d6b +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710-rpi-zero-2.dts +@@ -0,0 +1 @@ ++#include "bcm2710-rpi-zero-2-w.dts" +diff --git a/arch/arm/boot/dts/bcm2710.dtsi b/arch/arm/boot/dts/bcm2710.dtsi +new file mode 100644 +index 000000000000..31b13b24affb +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2710.dtsi +@@ -0,0 +1,27 @@ ++#define i2c0 i2c0if ++#include "bcm2837.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++ ++/ { ++ compatible = "brcm,bcm2837", "brcm,bcm2836"; ++ ++ arm-pmu { ++ compatible = "arm,cortex-a53-pmu", "arm,cortex-a7-pmu"; ++ }; ++ ++ soc { ++ /delete-node/ timer@7e003000; ++ }; ++ ++ __overrides__ { ++ arm_freq = <&cpu0>, "clock-frequency:0", ++ <&cpu1>, "clock-frequency:0", ++ <&cpu2>, "clock-frequency:0", ++ <&cpu3>, "clock-frequency:0"; ++ }; ++}; ++ ++&vc4 { ++ status = "disabled"; ++}; +diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +index 4432412044de..43a6cdcb7150 100644 +--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +@@ -1,9 +1,15 @@ + // SPDX-License-Identifier: GPL-2.0 + /dts-v1/; ++#define BCM2711 ++#define i2c0 i2c0if + #include "bcm2711.dtsi" +-#include "bcm2711-rpi.dtsi" +-#include "bcm283x-rpi-usb-peripheral.dtsi" + #include "bcm283x-rpi-wifi-bt.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++#define i2c0 i2c0mux ++#include "bcm2711-rpi.dtsi" ++#undef i2c0 ++//#include "bcm283x-rpi-usb-peripheral.dtsi" + + / { + compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; +@@ -72,7 +78,7 @@ &expgpio { + "VDD_SD_IO_SEL", + "CAM_GPIO", /* 5 */ + "SD_PWR_ON", +- ""; ++ "SD_OC_N"; + }; + + &gpio { +@@ -240,3 +246,311 @@ &vec { + &wifi_pwrseq { + reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + }; ++ ++// ============================================= ++// Downstream rpi- changes ++ ++#include "bcm271x-rpi-bt.dtsi" ++ ++/ { ++ soc { ++ /delete-node/ pixelvalve@7e807000; ++ /delete-node/ hdmi@7e902000; ++ }; ++}; ++ ++#include "bcm2711-rpi-ds.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++ ++/ { ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc0 = &emmc2; ++ mmc1 = &mmcnr; ++ mmc2 = &sdhost; ++ i2c3 = &i2c3; ++ i2c4 = &i2c4; ++ i2c5 = &i2c5; ++ i2c6 = &i2c6; ++ i2c20 = &ddc0; ++ i2c21 = &ddc1; ++ spi3 = &spi3; ++ spi4 = &spi4; ++ spi5 = &spi5; ++ spi6 = &spi6; ++ /delete-property/ intc; ++ }; ++ ++ /delete-node/ wifi-pwrseq; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-0 = <&uart1_pins>; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = ; ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = ; ++ }; ++ ++ spi3_pins: spi3_pins { ++ brcm,pins = <1 2 3>; ++ brcm,function = ; ++ }; ++ ++ spi3_cs_pins: spi3_cs_pins { ++ brcm,pins = <0 24>; ++ brcm,function = ; ++ }; ++ ++ spi4_pins: spi4_pins { ++ brcm,pins = <5 6 7>; ++ brcm,function = ; ++ }; ++ ++ spi4_cs_pins: spi4_cs_pins { ++ brcm,pins = <4 25>; ++ brcm,function = ; ++ }; ++ ++ spi5_pins: spi5_pins { ++ brcm,pins = <13 14 15>; ++ brcm,function = ; ++ }; ++ ++ spi5_cs_pins: spi5_cs_pins { ++ brcm,pins = <12 26>; ++ brcm,function = ; ++ }; ++ ++ spi6_pins: spi6_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = ; ++ }; ++ ++ spi6_cs_pins: spi6_cs_pins { ++ brcm,pins = <18 27>; ++ brcm,function = ; ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c3_pins: i2c3 { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c4_pins: i2c4 { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c5_pins: i2c5 { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c6_pins: i2c6 { ++ brcm,pins = <22 23>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = ; ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = ; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0 ++ // to fool pinctrl ++ brcm,function = <0>; ++ brcm,pull = <2>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart2_pins: uart2_pins { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart3_pins: uart3_pins { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart4_pins: uart4_pins { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart5_pins: uart5_pins { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++// ============================================= ++// Board specific stuff here ++ ++&sdhost { ++ status = "disabled"; ++}; ++ ++&phy1 { ++ led-modes = <0x00 0x08>; /* link/activity link */ ++}; ++ ++&gpio { ++ audio_pins: audio_pins { ++ brcm,pins = <40 41>; ++ brcm,function = <4>; ++ brcm,pull = <0>; ++ }; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ pwr_led: led-pwr { ++ label = "led1"; ++ linux,default-trigger = "default-on"; ++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&pwm1 { ++ status = "disabled"; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; ++}; ++ ++cam0_reg: &cam_dummy_reg { ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ ++ eth_led0 = <&phy1>,"led-modes:0"; ++ eth_led1 = <&phy1>,"led-modes:4"; ++ ++ sd_poll_once = <&emmc2>, "non-removable?"; ++ spi_dma4 = <&spi0>, "dmas:0=", <&dma40>, ++ <&spi0>, "dmas:8=", <&dma40>; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts +index c53d9eb0b802..67df994170c7 100644 +--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts +@@ -1,6 +1,15 @@ + // SPDX-License-Identifier: GPL-2.0 + /dts-v1/; +-#include "bcm2711-rpi-4-b.dts" ++#define BCM2711 ++#define i2c0 i2c0if ++#include "bcm2711.dtsi" ++#include "bcm283x-rpi-wifi-bt.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++#define i2c0 i2c0mux ++#include "bcm2711-rpi.dtsi" ++#undef i2c0 ++//#include "bcm283x-rpi-usb-peripheral.dtsi" + + / { + compatible = "raspberrypi,400", "brcm,bcm2711"; +@@ -12,19 +21,55 @@ chosen { + }; + + leds { +- /delete-node/ led-act; ++ led-act { ++ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++ }; + + led-pwr { +- gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++ label = "PWR"; ++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; ++ default-state = "keep"; ++ linux,default-trigger = "default-on"; + }; + }; + +- gpio-poweroff { +- compatible = "gpio-poweroff"; +- gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>; ++ sd_io_1v8_reg: sd_io_1v8_reg { ++ compatible = "regulator-gpio"; ++ regulator-name = "vdd-sd-io"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-settling-time-us = <5000>; ++ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; ++ states = <1800000 0x1>, ++ <3300000 0x0>; ++ status = "okay"; ++ }; ++ ++ sd_vcc_reg: sd_vcc_reg { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-sd"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; + }; + }; + ++&bt { ++ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; ++}; ++ ++&ddc0 { ++ status = "okay"; ++}; ++ ++&ddc1 { ++ status = "okay"; ++}; ++ + &expgpio { + gpio-line-names = "BT_ON", + "WL_ON", +@@ -36,10 +81,481 @@ &expgpio { + "SHUTDOWN_REQUEST"; + }; + ++&gpio { ++ /* ++ * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "RGMII_MDIO", ++ "RGMIO_MDC", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ /* Shared with SPI flash */ ++ "PWM0_MISO", ++ "PWM1_MOSI", ++ "STATUS_LED_G_CLK", ++ "SPIFLASH_CE_N", ++ "SDA0", ++ "SCL0", ++ "RGMII_RXCLK", ++ "RGMII_RXCTL", ++ "RGMII_RXD0", ++ "RGMII_RXD1", ++ "RGMII_RXD2", ++ "RGMII_RXD3", ++ "RGMII_TXCLK", ++ "RGMII_TXCTL", ++ "RGMII_TXD0", ++ "RGMII_TXD1", ++ "RGMII_TXD2", ++ "RGMII_TXD3"; ++}; ++ ++&hdmi0 { ++ status = "okay"; ++}; ++ ++&hdmi1 { ++ status = "okay"; ++}; ++ ++&pixelvalve0 { ++ status = "okay"; ++}; ++ ++&pixelvalve1 { ++ status = "okay"; ++}; ++ ++&pixelvalve2 { ++ status = "okay"; ++}; ++ ++&pixelvalve4 { ++ status = "okay"; ++}; ++ ++&pwm1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; ++ status = "okay"; ++}; ++ ++/* EMMC2 is used to drive the SD card */ ++&emmc2 { ++ vqmmc-supply = <&sd_io_1v8_reg>; ++ vmmc-supply = <&sd_vcc_reg>; ++ broken-cd; ++ status = "okay"; ++}; ++ ++&genet { ++ phy-handle = <&phy1>; ++ phy-mode = "rgmii-rxid"; ++ status = "okay"; ++}; ++ ++&genet_mdio { ++ phy1: ethernet-phy@1 { ++ /* No PHY interrupt */ ++ reg = <0x1>; ++ }; ++}; ++ ++&pcie0 { ++ pci@0,0 { ++ device_type = "pci"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ranges; ++ ++ reg = <0 0 0 0 0>; ++ ++ usb@0,0 { ++ reg = <0 0 0 0 0>; ++ resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>; ++ }; ++ }; ++}; ++ ++/* uart0 communicates with the BT module */ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; ++ uart-has-rtscts; ++}; ++ ++/* uart1 is mapped to the pin header */ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_gpio14>; ++ status = "okay"; ++}; ++ ++&vc4 { ++ status = "okay"; ++}; ++ ++&vec { ++ status = "disabled"; ++}; ++ ++&wifi_pwrseq { ++ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; ++}; ++ ++// ============================================= ++// Downstream rpi- changes ++ ++#include "bcm271x-rpi-bt.dtsi" ++ ++/ { ++ soc { ++ /delete-node/ pixelvalve@7e807000; ++ /delete-node/ hdmi@7e902000; ++ }; ++}; ++ ++#include "bcm2711-rpi-ds.dtsi" ++#include "bcm283x-rpi-csi1-2lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++ ++/ { ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc0 = &emmc2; ++ mmc1 = &mmcnr; ++ mmc2 = &sdhost; ++ i2c3 = &i2c3; ++ i2c4 = &i2c4; ++ i2c5 = &i2c5; ++ i2c6 = &i2c6; ++ i2c20 = &ddc0; ++ i2c21 = &ddc1; ++ spi3 = &spi3; ++ spi4 = &spi4; ++ spi5 = &spi5; ++ spi6 = &spi6; ++ /delete-property/ intc; ++ }; ++ ++ /delete-node/ wifi-pwrseq; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-0 = <&uart1_pins>; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = ; ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = ; ++ }; ++ ++ spi3_pins: spi3_pins { ++ brcm,pins = <1 2 3>; ++ brcm,function = ; ++ }; ++ ++ spi3_cs_pins: spi3_cs_pins { ++ brcm,pins = <0 24>; ++ brcm,function = ; ++ }; ++ ++ spi4_pins: spi4_pins { ++ brcm,pins = <5 6 7>; ++ brcm,function = ; ++ }; ++ ++ spi4_cs_pins: spi4_cs_pins { ++ brcm,pins = <4 25>; ++ brcm,function = ; ++ }; ++ ++ spi5_pins: spi5_pins { ++ brcm,pins = <13 14 15>; ++ brcm,function = ; ++ }; ++ ++ spi5_cs_pins: spi5_cs_pins { ++ brcm,pins = <12 26>; ++ brcm,function = ; ++ }; ++ ++ spi6_pins: spi6_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = ; ++ }; ++ ++ spi6_cs_pins: spi6_cs_pins { ++ brcm,pins = <18 27>; ++ brcm,function = ; ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c3_pins: i2c3 { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c4_pins: i2c4 { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c5_pins: i2c5 { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c6_pins: i2c6 { ++ brcm,pins = <22 23>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = ; ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = ; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0 ++ // to fool pinctrl ++ brcm,function = <0>; ++ brcm,pull = <2>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart2_pins: uart2_pins { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart3_pins: uart3_pins { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart4_pins: uart4_pins { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart5_pins: uart5_pins { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++// ============================================= ++// Board specific stuff here ++ ++/ { ++ power_ctrl: power_ctrl { ++ compatible = "gpio-poweroff"; ++ gpios = <&expgpio 5 0>; ++ force; ++ }; ++}; ++ ++&sdhost { ++ status = "disabled"; ++}; ++ ++&phy1 { ++ led-modes = <0x00 0x08>; /* link/activity link */ ++}; ++ ++&gpio { ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "default-on"; ++ default-state = "on"; ++ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ pwr_led: led-pwr { ++ label = "led1"; ++ linux,default-trigger = "default-on"; ++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&pwm1 { ++ status = "disabled"; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ + &genet_mdio { + clock-frequency = <1950000>; + }; + +-&pm { +- /delete-property/ system-power-controller; ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ ++ eth_led0 = <&phy1>,"led-modes:0"; ++ eth_led1 = <&phy1>,"led-modes:4"; ++ ++ sd_poll_once = <&emmc2>, "non-removable?"; ++ spi_dma4 = <&spi0>, "dmas:0=", <&dma40>, ++ <&spi0>, "dmas:8=", <&dma40>; ++ }; + }; +diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts +new file mode 100644 +index 000000000000..5510a1b731c1 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts +@@ -0,0 +1,578 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/dts-v1/; ++#define BCM2711 ++#define i2c0 i2c0if ++#include "bcm2711.dtsi" ++#include "bcm283x-rpi-wifi-bt.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++#define i2c0 i2c0mux ++#include "bcm2711-rpi.dtsi" ++#undef i2c0 ++//#include "bcm283x-rpi-usb-peripheral.dtsi" ++ ++/ { ++ compatible = "raspberrypi,4-compute-module", "brcm,bcm2711"; ++ model = "Raspberry Pi Compute Module 4"; ++ ++ chosen { ++ /* 8250 auxiliary UART instead of pl011 */ ++ stdout-path = "serial1:115200n8"; ++ }; ++ ++ leds { ++ led-act { ++ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ led-pwr { ++ label = "PWR"; ++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; ++ default-state = "keep"; ++ linux,default-trigger = "default-on"; ++ }; ++ }; ++ ++ sd_io_1v8_reg: sd_io_1v8_reg { ++ compatible = "regulator-gpio"; ++ regulator-name = "vdd-sd-io"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-settling-time-us = <5000>; ++ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; ++ states = <1800000 0x1>, ++ <3300000 0x0>; ++ status = "okay"; ++ }; ++ ++ sd_vcc_reg: sd_vcc_reg { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-sd"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; ++ }; ++}; ++ ++&bt { ++ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; ++}; ++ ++&ddc0 { ++ status = "okay"; ++}; ++ ++&ddc1 { ++ status = "okay"; ++}; ++ ++&expgpio { ++ gpio-line-names = "BT_ON", ++ "WL_ON", ++ "PWR_LED_OFF", ++ "ANT1", ++ "VDD_SD_IO_SEL", ++ "CAM_GPIO", ++ "SD_PWR_ON", ++ "ANT2"; ++ ++ ant1: ant1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ }; ++ ++ ant2: ant2 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ }; ++}; ++ ++&gpio { ++ /* ++ * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "RGMII_MDIO", ++ "RGMIO_MDC", ++ /* Used by BT module */ ++ "CTS0", ++ "RTS0", ++ "TXD0", ++ "RXD0", ++ /* Used by Wifi */ ++ "SD1_CLK", ++ "SD1_CMD", ++ "SD1_DATA0", ++ "SD1_DATA1", ++ "SD1_DATA2", ++ "SD1_DATA3", ++ /* Shared with SPI flash */ ++ "PWM0_MISO", ++ "PWM1_MOSI", ++ "STATUS_LED_G_CLK", ++ "SPIFLASH_CE_N", ++ "SDA0", ++ "SCL0", ++ "RGMII_RXCLK", ++ "RGMII_RXCTL", ++ "RGMII_RXD0", ++ "RGMII_RXD1", ++ "RGMII_RXD2", ++ "RGMII_RXD3", ++ "RGMII_TXCLK", ++ "RGMII_TXCTL", ++ "RGMII_TXD0", ++ "RGMII_TXD1", ++ "RGMII_TXD2", ++ "RGMII_TXD3"; ++}; ++ ++&hdmi0 { ++ status = "okay"; ++}; ++ ++&hdmi1 { ++ status = "okay"; ++}; ++ ++&pixelvalve0 { ++ status = "okay"; ++}; ++ ++&pixelvalve1 { ++ status = "okay"; ++}; ++ ++&pixelvalve2 { ++ status = "okay"; ++}; ++ ++&pixelvalve4 { ++ status = "okay"; ++}; ++ ++&pwm1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; ++ status = "okay"; ++}; ++ ++/* EMMC2 is used to drive the EMMC card */ ++&emmc2 { ++ bus-width = <8>; ++ vqmmc-supply = <&sd_io_1v8_reg>; ++ vmmc-supply = <&sd_vcc_reg>; ++ broken-cd; ++ status = "okay"; ++}; ++ ++&genet { ++ phy-handle = <&phy1>; ++ phy-mode = "rgmii-rxid"; ++ status = "okay"; ++}; ++ ++&genet_mdio { ++ phy1: ethernet-phy@0 { ++ /* No PHY interrupt */ ++ reg = <0x0>; ++ }; ++}; ++ ++&pcie0 { ++ pci@0,0 { ++ device_type = "pci"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ranges; ++ ++ reg = <0 0 0 0 0>; ++ }; ++}; ++ ++/* uart0 communicates with the BT module */ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>; ++ uart-has-rtscts; ++}; ++ ++/* uart1 is mapped to the pin header */ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_gpio14>; ++ status = "okay"; ++}; ++ ++&vc4 { ++ status = "okay"; ++}; ++ ++&vec { ++ status = "disabled"; ++}; ++ ++&wifi_pwrseq { ++ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; ++}; ++ ++// ============================================= ++// Downstream rpi- changes ++ ++#include "bcm271x-rpi-bt.dtsi" ++ ++/ { ++ soc { ++ /delete-node/ pixelvalve@7e807000; ++ /delete-node/ hdmi@7e902000; ++ }; ++}; ++ ++#include "bcm2711-rpi-ds.dtsi" ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_44.dtsi" ++ ++/ { ++ chosen { ++ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ mmc0 = &emmc2; ++ mmc1 = &mmcnr; ++ mmc2 = &sdhost; ++ i2c3 = &i2c3; ++ i2c4 = &i2c4; ++ i2c5 = &i2c5; ++ i2c6 = &i2c6; ++ i2c20 = &ddc0; ++ i2c21 = &ddc1; ++ spi3 = &spi3; ++ spi4 = &spi4; ++ spi5 = &spi5; ++ spi6 = &spi6; ++ /delete-property/ intc; ++ }; ++ ++ /delete-node/ wifi-pwrseq; ++}; ++ ++&mmcnr { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; ++ bus-width = <4>; ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-0 = <&uart0_pins &bt_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-0 = <&uart1_pins>; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = ; ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = ; ++ }; ++ ++ spi3_pins: spi3_pins { ++ brcm,pins = <1 2 3>; ++ brcm,function = ; ++ }; ++ ++ spi3_cs_pins: spi3_cs_pins { ++ brcm,pins = <0 24>; ++ brcm,function = ; ++ }; ++ ++ spi4_pins: spi4_pins { ++ brcm,pins = <5 6 7>; ++ brcm,function = ; ++ }; ++ ++ spi4_cs_pins: spi4_cs_pins { ++ brcm,pins = <4 25>; ++ brcm,function = ; ++ }; ++ ++ spi5_pins: spi5_pins { ++ brcm,pins = <13 14 15>; ++ brcm,function = ; ++ }; ++ ++ spi5_cs_pins: spi5_cs_pins { ++ brcm,pins = <12 26>; ++ brcm,function = ; ++ }; ++ ++ spi6_pins: spi6_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = ; ++ }; ++ ++ spi6_cs_pins: spi6_cs_pins { ++ brcm,pins = <18 27>; ++ brcm,function = ; ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c3_pins: i2c3 { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c4_pins: i2c4 { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c5_pins: i2c5 { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c6_pins: i2c6 { ++ brcm,pins = <22 23>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = ; ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = ; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ bt_pins: bt_pins { ++ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0 ++ // to fool pinctrl ++ brcm,function = <0>; ++ brcm,pull = <2>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins = <32 33>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart1_pins: uart1_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart2_pins: uart2_pins { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart3_pins: uart3_pins { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart4_pins: uart4_pins { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart5_pins: uart5_pins { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++// ============================================= ++// Board specific stuff here ++ ++&pcie0 { ++ brcm,enable-l1ss; ++}; ++ ++&sdhost { ++ status = "disabled"; ++}; ++ ++&phy1 { ++ led-modes = <0x00 0x08>; /* link/activity link */ ++}; ++ ++&gpio { ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ pwr_led: led-pwr { ++ label = "led1"; ++ linux,default-trigger = "default-on"; ++ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&pwm1 { ++ status = "disabled"; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++cam0_reg: &cam1_reg { ++ gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ pwr_led_gpio = <&pwr_led>,"gpios:4"; ++ pwr_led_activelow = <&pwr_led>,"gpios:8"; ++ pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; ++ ++ eth_led0 = <&phy1>,"led-modes:0"; ++ eth_led1 = <&phy1>,"led-modes:4"; ++ ++ ant1 = <&ant1>,"output-high?=on", ++ <&ant1>, "output-low?=off", ++ <&ant2>, "output-high?=off", ++ <&ant2>, "output-low?=on"; ++ ant2 = <&ant1>,"output-high?=off", ++ <&ant1>, "output-low?=on", ++ <&ant2>, "output-high?=on", ++ <&ant2>, "output-low?=off"; ++ noant = <&ant1>,"output-high?=off", ++ <&ant1>, "output-low?=on", ++ <&ant2>, "output-high?=off", ++ <&ant2>, "output-low?=on"; ++ ++ sd_poll_once = <&emmc2>, "non-removable?"; ++ spi_dma4 = <&spi0>, "dmas:0=", <&dma40>, ++ <&spi0>, "dmas:8=", <&dma40>; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4s.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4s.dts +new file mode 100644 +index 000000000000..1a1d7af1d148 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2711-rpi-cm4s.dts +@@ -0,0 +1,427 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/dts-v1/; ++#define BCM2711 ++#define i2c0 i2c0if ++#include "bcm2711.dtsi" ++//#include "bcm283x-rpi-wifi-bt.dtsi" ++#undef i2c0 ++#include "bcm270x.dtsi" ++#define i2c0 i2c0mux ++#include "bcm2711-rpi.dtsi" ++#undef i2c0 ++ ++/ { ++ compatible = "raspberrypi,4-compute-module-s", "brcm,bcm2711"; ++ model = "Raspberry Pi Compute Module 4S"; ++ ++ leds { ++ led-act { ++ gpios = <&virtgpio 0 0>; ++ }; ++ }; ++}; ++ ++&ddc0 { ++ status = "okay"; ++}; ++ ++&gpio { ++ /* ++ * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and ++ * the official GPU firmware DT blob. ++ * ++ * Legend: ++ * "FOO" = GPIO line named "FOO" on the schematic ++ * "FOO_N" = GPIO line named "FOO" on schematic, active low ++ */ ++ gpio-line-names = "ID_SDA", ++ "ID_SCL", ++ "SDA1", ++ "SCL1", ++ "GPIO_GCLK", ++ "GPIO5", ++ "GPIO6", ++ "SPI_CE1_N", ++ "SPI_CE0_N", ++ "SPI_MISO", ++ "SPI_MOSI", ++ "SPI_SCLK", ++ "GPIO12", ++ "GPIO13", ++ /* Serial port */ ++ "TXD1", ++ "RXD1", ++ "GPIO16", ++ "GPIO17", ++ "GPIO18", ++ "GPIO19", ++ "GPIO20", ++ "GPIO21", ++ "GPIO22", ++ "GPIO23", ++ "GPIO24", ++ "GPIO25", ++ "GPIO26", ++ "GPIO27", ++ "GPIO28", ++ "GPIO29", ++ "GPIO30", ++ "GPIO31", ++ "GPIO32", ++ "GPIO33", ++ "GPIO34", ++ "GPIO35", ++ "GPIO36", ++ "GPIO37", ++ "GPIO38", ++ "GPIO39", ++ "PWM0_MISO", ++ "PWM1_MOSI", ++ "GPIO42", ++ "GPIO43", ++ "GPIO44", ++ "GPIO45"; ++}; ++ ++&hdmi0 { ++ status = "okay"; ++}; ++ ++&pixelvalve0 { ++ status = "okay"; ++}; ++ ++&pixelvalve1 { ++ status = "okay"; ++}; ++ ++&pixelvalve2 { ++ status = "okay"; ++}; ++ ++&pixelvalve4 { ++ status = "okay"; ++}; ++ ++&pwm1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; ++ status = "okay"; ++}; ++ ++/* EMMC2 is used to drive the EMMC card */ ++&emmc2 { ++ bus-width = <8>; ++ broken-cd; ++ status = "okay"; ++}; ++ ++&pcie0 { ++ status = "disabled"; ++}; ++ ++&vchiq { ++ interrupts = ; ++}; ++ ++&vc4 { ++ status = "okay"; ++}; ++ ++&vec { ++ status = "disabled"; ++}; ++ ++// ============================================= ++// Downstream rpi- changes ++ ++#include "bcm2711-rpi-ds.dtsi" ++ ++/ { ++ soc { ++ /delete-node/ pixelvalve@7e807000; ++ /delete-node/ hdmi@7e902000; ++ ++ virtgpio: virtgpio { ++ compatible = "brcm,bcm2835-virtgpio"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ firmware = <&firmware>; ++ status = "okay"; ++ }; ++ }; ++}; ++ ++#include "bcm283x-rpi-csi0-2lane.dtsi" ++#include "bcm283x-rpi-csi1-4lane.dtsi" ++#include "bcm283x-rpi-i2c0mux_0_28.dtsi" ++ ++/ { ++ chosen { ++ bootargs = "coherent_pool=1M snd_bcm2835.enable_headphones=0"; ++ }; ++ ++ aliases { ++ serial0 = &uart0; ++ mmc0 = &emmc2; ++ mmc1 = &mmcnr; ++ mmc2 = &sdhost; ++ i2c3 = &i2c3; ++ i2c4 = &i2c4; ++ i2c5 = &i2c5; ++ i2c6 = &i2c6; ++ spi3 = &spi3; ++ spi4 = &spi4; ++ spi5 = &spi5; ++ spi6 = &spi6; ++ /delete-property/ intc; ++ }; ++ ++ /delete-node/ wifi-pwrseq; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ status = "okay"; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins &spi0_cs_pins>; ++ cs-gpios = <&gpio 8 1>, <&gpio 7 1>; ++ ++ spidev0: spidev@0{ ++ compatible = "spidev"; ++ reg = <0>; /* CE0 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++ ++ spidev1: spidev@1{ ++ compatible = "spidev"; ++ reg = <1>; /* CE1 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ spi-max-frequency = <125000000>; ++ }; ++}; ++ ++&gpio { ++ spi0_pins: spi0_pins { ++ brcm,pins = <9 10 11>; ++ brcm,function = ; ++ }; ++ ++ spi0_cs_pins: spi0_cs_pins { ++ brcm,pins = <8 7>; ++ brcm,function = ; ++ }; ++ ++ spi3_pins: spi3_pins { ++ brcm,pins = <1 2 3>; ++ brcm,function = ; ++ }; ++ ++ spi3_cs_pins: spi3_cs_pins { ++ brcm,pins = <0 24>; ++ brcm,function = ; ++ }; ++ ++ spi4_pins: spi4_pins { ++ brcm,pins = <5 6 7>; ++ brcm,function = ; ++ }; ++ ++ spi4_cs_pins: spi4_cs_pins { ++ brcm,pins = <4 25>; ++ brcm,function = ; ++ }; ++ ++ spi5_pins: spi5_pins { ++ brcm,pins = <13 14 15>; ++ brcm,function = ; ++ }; ++ ++ spi5_cs_pins: spi5_cs_pins { ++ brcm,pins = <12 26>; ++ brcm,function = ; ++ }; ++ ++ spi6_pins: spi6_pins { ++ brcm,pins = <19 20 21>; ++ brcm,function = ; ++ }; ++ ++ spi6_cs_pins: spi6_cs_pins { ++ brcm,pins = <18 27>; ++ brcm,function = ; ++ }; ++ ++ i2c0_pins: i2c0 { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c1_pins: i2c1 { ++ brcm,pins = <2 3>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c3_pins: i2c3 { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c4_pins: i2c4 { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c5_pins: i2c5 { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2c6_pins: i2c6 { ++ brcm,pins = <22 23>; ++ brcm,function = ; ++ brcm,pull = ; ++ }; ++ ++ i2s_pins: i2s { ++ brcm,pins = <18 19 20 21>; ++ brcm,function = ; ++ }; ++ ++ sdio_pins: sdio_pins { ++ brcm,pins = <34 35 36 37 38 39>; ++ brcm,function = ; // alt3 = SD1 ++ brcm,pull = <0 2 2 2 2 2>; ++ }; ++ ++ uart0_pins: uart0_pins { ++ brcm,pins; ++ brcm,function; ++ brcm,pull; ++ }; ++ ++ uart2_pins: uart2_pins { ++ brcm,pins = <0 1>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart3_pins: uart3_pins { ++ brcm,pins = <4 5>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart4_pins: uart4_pins { ++ brcm,pins = <8 9>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++ ++ uart5_pins: uart5_pins { ++ brcm,pins = <12 13>; ++ brcm,function = ; ++ brcm,pull = <0 2>; ++ }; ++}; ++ ++&i2c0if { ++ clock-frequency = <100000>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <100000>; ++}; ++ ++&i2s { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2s_pins>; ++}; ++ ++// ============================================= ++// Board specific stuff here ++ ++/* Enable USB in OTG-aware mode */ ++&usb { ++ compatible = "brcm,bcm2835-usb"; ++ dr_mode = "otg"; ++ g-np-tx-fifo-size = <32>; ++ g-rx-fifo-size = <558>; ++ g-tx-fifo-size = <512 512 512 512 512 256 256>; ++ status = "okay"; ++}; ++ ++&sdhost { ++ status = "disabled"; ++}; ++ ++&gpio { ++ audio_pins: audio_pins { ++ brcm,pins = <>; ++ brcm,function = <>; ++ }; ++}; ++ ++/* Permanently disable HDMI1 */ ++&hdmi1 { ++ compatible = "disabled"; ++}; ++ ++/* Permanently disable DDC1 */ ++&ddc1 { ++ compatible = "disabled"; ++}; ++ ++&leds { ++ act_led: led-act { ++ label = "led0"; ++ linux,default-trigger = "mmc0"; ++ }; ++}; ++ ++&pwm1 { ++ status = "disabled"; ++}; ++ ++&vchiq { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&audio_pins>; ++}; ++ ++&cam1_reg { ++ gpio = <&gpio 2 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++cam0_reg: &cam0_regulator { ++ gpio = <&gpio 30 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++}; ++ ++/ { ++ __overrides__ { ++ audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; ++ ++ act_led_gpio = <&act_led>,"gpios:4"; ++ act_led_activelow = <&act_led>,"gpios:8"; ++ act_led_trigger = <&act_led>,"linux,default-trigger"; ++ ++ sd_poll_once = <&emmc2>, "non-removable?"; ++ spi_dma4 = <&spi0>, "dmas:0=", <&dma40>, ++ <&spi0>, "dmas:8=", <&dma40>; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2711-rpi-ds.dtsi b/arch/arm/boot/dts/bcm2711-rpi-ds.dtsi +new file mode 100644 +index 000000000000..5f9a5bad98ad +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2711-rpi-ds.dtsi +@@ -0,0 +1,292 @@ ++// SPDX-License-Identifier: GPL-2.0 ++#include "bcm270x-rpi.dtsi" ++ ++/ { ++ __overrides__ { ++ arm_freq; ++ hdmi = <&hdmi0>,"status", ++ <&hdmi1>,"status"; ++ pcie = <&pcie0>,"status"; ++ sd = <&emmc2>,"status"; ++ }; ++ ++ scb: scb { ++ /* Add a label */ ++ }; ++ ++ arm-pmu { ++ compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3", "arm,cortex-a7-pmu"; ++ ++ }; ++ ++ chosen { ++ /delete-property/ stdout-path; ++ }; ++}; ++ ++&vc4 { ++ raspberrypi,firmware = <&firmware>; ++}; ++ ++&cma { ++ /* Limit cma to the lower 768MB to allow room for HIGHMEM on 32-bit */ ++ alloc-ranges = <0x0 0x00000000 0x30000000>; ++}; ++ ++&scb { ++ #size-cells = <2>; ++ ++ ranges = <0x0 0x7c000000 0x0 0xfc000000 0x0 0x03800000>, ++ <0x0 0x40000000 0x0 0xff800000 0x0 0x00800000>, ++ <0x6 0x00000000 0x6 0x00000000 0x0 0x40000000>, ++ <0x0 0x00000000 0x0 0x00000000 0x0 0xfc000000>; ++ dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x4 0x00000000>; ++ ++ dma40: dma@7e007b00 { ++ compatible = "brcm,bcm2711-dma"; ++ reg = <0x0 0x7e007b00 0x0 0x400>; ++ interrupts = ++ , /* dma4 11 */ ++ , /* dma4 12 */ ++ , /* dma4 13 */ ++ ; /* dma4 14 */ ++ interrupt-names = "dma11", ++ "dma12", ++ "dma13", ++ "dma14"; ++ #dma-cells = <1>; ++ brcm,dma-channel-mask = <0x7800>; ++ }; ++ ++ xhci: xhci@7e9c0000 { ++ compatible = "generic-xhci"; ++ status = "disabled"; ++ reg = <0x0 0x7e9c0000 0x0 0x100000>; ++ interrupts = ; ++ power-domains = <&power RPI_POWER_DOMAIN_USB>; ++ }; ++ ++ codec@7eb10000 { ++ compatible = "raspberrypi,rpivid-vid-decoder"; ++ reg = <0x0 0x7eb10000 0x0 0x1000>, /* INTC */ ++ <0x0 0x7eb00000 0x0 0x10000>; /* HEVC */ ++ reg-names = "intc", ++ "hevc"; ++ interrupts = ; ++ ++ clocks = <&firmware_clocks 11>; ++ clock-names = "hevc"; ++ }; ++}; ++ ++&pcie0 { ++ reg = <0x0 0x7d500000 0x0 0x9310>; ++ ranges = <0x02000000 0x0 0xc0000000 0x6 0x00000000 ++ 0x0 0x40000000>; ++}; ++ ++&genet { ++ reg = <0x0 0x7d580000 0x0 0x10000>; ++}; ++ ++&dma40 { ++ /* The VPU firmware uses DMA channel 11 for VCHIQ */ ++ brcm,dma-channel-mask = <0x7000>; ++}; ++ ++&vchiq { ++ compatible = "brcm,bcm2711-vchiq"; ++}; ++ ++&firmwarekms { ++ compatible = "raspberrypi,rpi-firmware-kms-2711"; ++ interrupts = ; ++}; ++ ++&smi { ++ interrupts = ; ++}; ++ ++&mmc { ++ interrupts = ; ++}; ++ ++&mmcnr { ++ interrupts = ; ++}; ++ ++&csi0 { ++ interrupts = ; ++}; ++ ++&csi1 { ++ interrupts = ; ++}; ++ ++&random { ++ compatible = "brcm,bcm2711-rng200"; ++ status = "okay"; ++}; ++ ++&usb { ++ /* Enable the FIQ support */ ++ reg = <0x7e980000 0x10000>, ++ <0x7e00b200 0x200>; ++ interrupts = , ++ ; ++ status = "disabled"; ++}; ++ ++&gpio { ++ interrupts = , ++ ; ++}; ++ ++&emmc2 { ++ mmc-ddr-3_3v; ++}; ++ ++&vc4 { ++ status = "disabled"; ++}; ++ ++&pixelvalve0 { ++ status = "disabled"; ++}; ++ ++&pixelvalve1 { ++ status = "disabled"; ++}; ++ ++&pixelvalve2 { ++ status = "disabled"; ++}; ++ ++&pixelvalve3 { ++ status = "disabled"; ++}; ++ ++&pixelvalve4 { ++ status = "disabled"; ++}; ++ ++&hdmi0 { ++ reg = <0x7ef00700 0x300>, ++ <0x7ef00300 0x200>, ++ <0x7ef00f00 0x80>, ++ <0x7ef00f80 0x80>, ++ <0x7ef01b00 0x200>, ++ <0x7ef01f00 0x400>, ++ <0x7ef00200 0x80>, ++ <0x7ef04300 0x100>, ++ <0x7ef20000 0x100>, ++ <0x7ef00100 0x30>; ++ reg-names = "hdmi", ++ "dvp", ++ "phy", ++ "rm", ++ "packet", ++ "metadata", ++ "csc", ++ "cec", ++ "hd", ++ "intr2"; ++ clocks = <&firmware_clocks 13>, ++ <&firmware_clocks 14>, ++ <&dvp 0>, ++ <&clk_27MHz>; ++ dmas = <&dma (10|(1<<27)|(1<<24)|(10<<16)|(15<<20))>; ++ status = "disabled"; ++}; ++ ++&ddc0 { ++ status = "disabled"; ++}; ++ ++&hdmi1 { ++ reg = <0x7ef05700 0x300>, ++ <0x7ef05300 0x200>, ++ <0x7ef05f00 0x80>, ++ <0x7ef05f80 0x80>, ++ <0x7ef06b00 0x200>, ++ <0x7ef06f00 0x400>, ++ <0x7ef00280 0x80>, ++ <0x7ef09300 0x100>, ++ <0x7ef20000 0x100>, ++ <0x7ef00100 0x30>; ++ reg-names = "hdmi", ++ "dvp", ++ "phy", ++ "rm", ++ "packet", ++ "metadata", ++ "csc", ++ "cec", ++ "hd", ++ "intr2"; ++ clocks = <&firmware_clocks 13>, ++ <&firmware_clocks 14>, ++ <&dvp 1>, ++ <&clk_27MHz>; ++ dmas = <&dma (17|(1<<27)|(1<<24)|(10<<16)|(15<<20))>; ++ status = "disabled"; ++}; ++ ++&ddc1 { ++ status = "disabled"; ++}; ++ ++&dvp { ++ status = "disabled"; ++}; ++ ++&vec { ++ clocks = <&firmware_clocks 15>; ++}; ++ ++&aon_intr { ++ interrupts = ; ++ status = "disabled"; ++}; ++ ++&system_timer { ++ status = "disabled"; ++}; ++ ++&i2c0 { ++ /delete-property/ compatible; ++ /delete-property/ interrupts; ++}; ++ ++&i2c0if { ++ compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; ++ interrupts = ; ++}; ++ ++/delete-node/ &v3d; ++ ++/ { ++ v3dbus: v3dbus { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <2>; ++ ranges = <0x7c500000 0x0 0xfc500000 0x0 0x03300000>, ++ <0x40000000 0x0 0xff800000 0x0 0x00800000>; ++ dma-ranges = <0x00000000 0x0 0x00000000 0x4 0x00000000>; ++ ++ v3d: v3d@7ec04000 { ++ compatible = "brcm,2711-v3d"; ++ reg = ++ <0x7ec00000 0x0 0x4000>, ++ <0x7ec04000 0x0 0x4000>; ++ reg-names = "hub", "core0"; ++ ++ power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; ++ resets = <&pm BCM2835_RESET_V3D>; ++ clocks = <&firmware_clocks 5>; ++ clocks-names = "v3d"; ++ interrupts = ; ++ status = "disabled"; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi +index 98817a6675b9..7b9e946db985 100644 +--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi +@@ -15,6 +15,7 @@ aliases { + ethernet0 = &genet; + pcie0 = &pcie0; + blconfig = &blconfig; ++ blpubkey = &blpubkey; + }; + }; + +@@ -67,6 +68,18 @@ blconfig: nvram@0 { + no-map; + status = "disabled"; + }; ++ /* ++ * RPi4 will copy the binary public key blob (if present) from the bootloader ++ * into memory for use by the OS. ++ */ ++ blpubkey: nvram@1 { ++ compatible = "raspberrypi,bootloader-public-key", "nvmem-rmem"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ reg = <0x0 0x0 0x0>; ++ no-map; ++ status = "disabled"; ++ }; + }; + + &v3d { +diff --git a/arch/arm/boot/dts/bcm271x-rpi-bt.dtsi b/arch/arm/boot/dts/bcm271x-rpi-bt.dtsi +new file mode 100644 +index 000000000000..6b9b79f74cf3 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm271x-rpi-bt.dtsi +@@ -0,0 +1,26 @@ ++// SPDX-License-Identifier: GPL-2.0 ++ ++&uart0 { ++ bt: bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <3000000>; ++ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++ }; ++}; ++ ++&uart1 { ++ minibt: bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <460800>; ++ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; ++ status = "disabled"; ++ }; ++}; ++ ++/ { ++ __overrides__ { ++ krnbt = <&bt>,"status"; ++ krnbt_baudrate = <&bt>,"max-speed:0"; ++ }; ++}; +diff --git a/arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi b/arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi +new file mode 100644 +index 000000000000..6e4ce8622b47 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm283x-rpi-csi0-2lane.dtsi +@@ -0,0 +1,4 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++&csi0 { ++ brcm,num-data-lanes = <2>; ++}; +diff --git a/arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi b/arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi +new file mode 100644 +index 000000000000..6938f4daacdc +--- /dev/null ++++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-2lane.dtsi +@@ -0,0 +1,4 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++&csi1 { ++ brcm,num-data-lanes = <2>; ++}; +diff --git a/arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi b/arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi +new file mode 100644 +index 000000000000..b37037437bee +--- /dev/null ++++ b/arch/arm/boot/dts/bcm283x-rpi-csi1-4lane.dtsi +@@ -0,0 +1,4 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++&csi1 { ++ brcm,num-data-lanes = <4>; ++}; +diff --git a/arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_28.dtsi b/arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_28.dtsi +new file mode 100644 +index 000000000000..38f0074bce3f +--- /dev/null ++++ b/arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_28.dtsi +@@ -0,0 +1,4 @@ ++&i2c0mux { ++ pinctrl-0 = <&i2c0_gpio0>; ++ pinctrl-1 = <&i2c0_gpio28>; ++}; +diff --git a/arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_44.dtsi b/arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_44.dtsi +new file mode 100644 +index 000000000000..119946d878db +--- /dev/null ++++ b/arch/arm/boot/dts/bcm283x-rpi-i2c0mux_0_44.dtsi +@@ -0,0 +1,4 @@ ++&i2c0mux { ++ pinctrl-0 = <&i2c0_gpio0>; ++ pinctrl-1 = <&i2c0_gpio44>; ++}; +diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile +new file mode 100644 +index 000000000000..37254235b641 +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -0,0 +1,287 @@ ++# Overlays for the Raspberry Pi platform ++ ++dtb-$(CONFIG_ARCH_BCM2835) += overlay_map.dtb ++ ++dtbo-$(CONFIG_ARCH_BCM2835) += \ ++ act-led.dtbo \ ++ adafruit-st7735r.dtbo \ ++ adafruit18.dtbo \ ++ adau1977-adc.dtbo \ ++ adau7002-simple.dtbo \ ++ ads1015.dtbo \ ++ ads1115.dtbo \ ++ ads7846.dtbo \ ++ adv7282m.dtbo \ ++ adv728x-m.dtbo \ ++ akkordion-iqdacplus.dtbo \ ++ allo-boss-dac-pcm512x-audio.dtbo \ ++ allo-boss2-dac-audio.dtbo \ ++ allo-digione.dtbo \ ++ allo-katana-dac-audio.dtbo \ ++ allo-piano-dac-pcm512x-audio.dtbo \ ++ allo-piano-dac-plus-pcm512x-audio.dtbo \ ++ anyspi.dtbo \ ++ apds9960.dtbo \ ++ applepi-dac.dtbo \ ++ arducam-64mp.dtbo \ ++ arducam-pivariety.dtbo \ ++ at86rf233.dtbo \ ++ audioinjector-addons.dtbo \ ++ audioinjector-bare-i2s.dtbo \ ++ audioinjector-isolated-soundcard.dtbo \ ++ audioinjector-ultra.dtbo \ ++ audioinjector-wm8731-audio.dtbo \ ++ audiosense-pi.dtbo \ ++ audremap.dtbo \ ++ balena-fin.dtbo \ ++ camera-mux-2port.dtbo \ ++ camera-mux-4port.dtbo \ ++ cap1106.dtbo \ ++ chipdip-dac.dtbo \ ++ cirrus-wm5102.dtbo \ ++ cma.dtbo \ ++ cutiepi-panel.dtbo \ ++ dacberry400.dtbo \ ++ dht11.dtbo \ ++ dionaudio-kiwi.dtbo \ ++ dionaudio-loco.dtbo \ ++ dionaudio-loco-v2.dtbo \ ++ disable-bt.dtbo \ ++ disable-wifi.dtbo \ ++ dpi18.dtbo \ ++ dpi18cpadhi.dtbo \ ++ dpi24.dtbo \ ++ draws.dtbo \ ++ dwc-otg.dtbo \ ++ dwc2.dtbo \ ++ edt-ft5406.dtbo \ ++ enc28j60.dtbo \ ++ enc28j60-spi2.dtbo \ ++ exc3000.dtbo \ ++ fbtft.dtbo \ ++ fe-pi-audio.dtbo \ ++ fsm-demo.dtbo \ ++ gc9a01.dtbo \ ++ ghost-amp.dtbo \ ++ goodix.dtbo \ ++ googlevoicehat-soundcard.dtbo \ ++ gpio-fan.dtbo \ ++ gpio-hog.dtbo \ ++ gpio-ir.dtbo \ ++ gpio-ir-tx.dtbo \ ++ gpio-key.dtbo \ ++ gpio-led.dtbo \ ++ gpio-no-bank0-irq.dtbo \ ++ gpio-no-irq.dtbo \ ++ gpio-poweroff.dtbo \ ++ gpio-shutdown.dtbo \ ++ hd44780-lcd.dtbo \ ++ hdmi-backlight-hwhack-gpio.dtbo \ ++ hifiberry-amp.dtbo \ ++ hifiberry-amp100.dtbo \ ++ hifiberry-amp3.dtbo \ ++ hifiberry-dac.dtbo \ ++ hifiberry-dacplus.dtbo \ ++ hifiberry-dacplusadc.dtbo \ ++ hifiberry-dacplusadcpro.dtbo \ ++ hifiberry-dacplusdsp.dtbo \ ++ hifiberry-dacplushd.dtbo \ ++ hifiberry-digi.dtbo \ ++ hifiberry-digi-pro.dtbo \ ++ highperi.dtbo \ ++ hy28a.dtbo \ ++ hy28b.dtbo \ ++ hy28b-2017.dtbo \ ++ i-sabre-q2m.dtbo \ ++ i2c-bcm2708.dtbo \ ++ i2c-fan.dtbo \ ++ i2c-gpio.dtbo \ ++ i2c-mux.dtbo \ ++ i2c-pwm-pca9685a.dtbo \ ++ i2c-rtc.dtbo \ ++ i2c-rtc-gpio.dtbo \ ++ i2c-sensor.dtbo \ ++ i2c0.dtbo \ ++ i2c1.dtbo \ ++ i2c3.dtbo \ ++ i2c4.dtbo \ ++ i2c5.dtbo \ ++ i2c6.dtbo \ ++ i2s-dac.dtbo \ ++ i2s-gpio28-31.dtbo \ ++ ilitek251x.dtbo \ ++ imx219.dtbo \ ++ imx258.dtbo \ ++ imx290.dtbo \ ++ imx296.dtbo \ ++ imx327.dtbo \ ++ imx378.dtbo \ ++ imx462.dtbo \ ++ imx477.dtbo \ ++ imx519.dtbo \ ++ iqaudio-codec.dtbo \ ++ iqaudio-dac.dtbo \ ++ iqaudio-dacplus.dtbo \ ++ iqaudio-digi-wm8804-audio.dtbo \ ++ iqs550.dtbo \ ++ irs1125.dtbo \ ++ jedec-spi-nor.dtbo \ ++ justboom-both.dtbo \ ++ justboom-dac.dtbo \ ++ justboom-digi.dtbo \ ++ ltc294x.dtbo \ ++ max98357a.dtbo \ ++ maxtherm.dtbo \ ++ mbed-dac.dtbo \ ++ mcp23017.dtbo \ ++ mcp23s17.dtbo \ ++ mcp2515.dtbo \ ++ mcp2515-can0.dtbo \ ++ mcp2515-can1.dtbo \ ++ mcp251xfd.dtbo \ ++ mcp3008.dtbo \ ++ mcp3202.dtbo \ ++ mcp342x.dtbo \ ++ media-center.dtbo \ ++ merus-amp.dtbo \ ++ midi-uart0.dtbo \ ++ midi-uart1.dtbo \ ++ midi-uart2.dtbo \ ++ midi-uart3.dtbo \ ++ midi-uart4.dtbo \ ++ midi-uart5.dtbo \ ++ minipitft13.dtbo \ ++ miniuart-bt.dtbo \ ++ mipi-dbi-spi.dtbo \ ++ mlx90640.dtbo \ ++ mmc.dtbo \ ++ mpu6050.dtbo \ ++ mz61581.dtbo \ ++ ov2311.dtbo \ ++ ov5647.dtbo \ ++ ov7251.dtbo \ ++ ov9281.dtbo \ ++ papirus.dtbo \ ++ pca953x.dtbo \ ++ pcie-32bit-dma.dtbo \ ++ pibell.dtbo \ ++ pifacedigital.dtbo \ ++ pifi-40.dtbo \ ++ pifi-dac-hd.dtbo \ ++ pifi-dac-zero.dtbo \ ++ pifi-mini-210.dtbo \ ++ piglow.dtbo \ ++ piscreen.dtbo \ ++ piscreen2r.dtbo \ ++ pisound.dtbo \ ++ pitft22.dtbo \ ++ pitft28-capacitive.dtbo \ ++ pitft28-resistive.dtbo \ ++ pitft35-resistive.dtbo \ ++ pps-gpio.dtbo \ ++ proto-codec.dtbo \ ++ pwm.dtbo \ ++ pwm-2chan.dtbo \ ++ pwm-ir-tx.dtbo \ ++ qca7000.dtbo \ ++ qca7000-uart0.dtbo \ ++ ramoops.dtbo \ ++ ramoops-pi4.dtbo \ ++ rotary-encoder.dtbo \ ++ rpi-backlight.dtbo \ ++ rpi-codeczero.dtbo \ ++ rpi-dacplus.dtbo \ ++ rpi-dacpro.dtbo \ ++ rpi-digiampplus.dtbo \ ++ rpi-ft5406.dtbo \ ++ rpi-poe.dtbo \ ++ rpi-poe-plus.dtbo \ ++ rpi-sense.dtbo \ ++ rpi-sense-v2.dtbo \ ++ rpi-tv.dtbo \ ++ rra-digidac1-wm8741-audio.dtbo \ ++ sainsmart18.dtbo \ ++ sc16is750-i2c.dtbo \ ++ sc16is752-i2c.dtbo \ ++ sc16is752-spi0.dtbo \ ++ sc16is752-spi1.dtbo \ ++ sdhost.dtbo \ ++ sdio.dtbo \ ++ seeed-can-fd-hat-v1.dtbo \ ++ seeed-can-fd-hat-v2.dtbo \ ++ sh1106-spi.dtbo \ ++ si446x-spi0.dtbo \ ++ smi.dtbo \ ++ smi-dev.dtbo \ ++ smi-nand.dtbo \ ++ spi-gpio35-39.dtbo \ ++ spi-gpio40-45.dtbo \ ++ spi-rtc.dtbo \ ++ spi0-0cs.dtbo \ ++ spi0-1cs.dtbo \ ++ spi0-2cs.dtbo \ ++ spi1-1cs.dtbo \ ++ spi1-2cs.dtbo \ ++ spi1-3cs.dtbo \ ++ spi2-1cs.dtbo \ ++ spi2-2cs.dtbo \ ++ spi2-3cs.dtbo \ ++ spi3-1cs.dtbo \ ++ spi3-2cs.dtbo \ ++ spi4-1cs.dtbo \ ++ spi4-2cs.dtbo \ ++ spi5-1cs.dtbo \ ++ spi5-2cs.dtbo \ ++ spi6-1cs.dtbo \ ++ spi6-2cs.dtbo \ ++ ssd1306.dtbo \ ++ ssd1306-spi.dtbo \ ++ ssd1331-spi.dtbo \ ++ ssd1351-spi.dtbo \ ++ superaudioboard.dtbo \ ++ sx150x.dtbo \ ++ tc358743.dtbo \ ++ tc358743-audio.dtbo \ ++ tinylcd35.dtbo \ ++ tpm-slb9670.dtbo \ ++ tpm-slb9673.dtbo \ ++ uart0.dtbo \ ++ uart1.dtbo \ ++ uart2.dtbo \ ++ uart3.dtbo \ ++ uart4.dtbo \ ++ uart5.dtbo \ ++ udrc.dtbo \ ++ ugreen-dabboard.dtbo \ ++ upstream.dtbo \ ++ upstream-pi4.dtbo \ ++ vc4-fkms-v3d.dtbo \ ++ vc4-fkms-v3d-pi4.dtbo \ ++ vc4-kms-dpi-generic.dtbo \ ++ vc4-kms-dpi-hyperpixel2r.dtbo \ ++ vc4-kms-dpi-hyperpixel4.dtbo \ ++ vc4-kms-dpi-hyperpixel4sq.dtbo \ ++ vc4-kms-dpi-panel.dtbo \ ++ vc4-kms-dsi-7inch.dtbo \ ++ vc4-kms-dsi-lt070me05000.dtbo \ ++ vc4-kms-dsi-lt070me05000-v2.dtbo \ ++ vc4-kms-kippah-7inch.dtbo \ ++ vc4-kms-v3d.dtbo \ ++ vc4-kms-v3d-pi4.dtbo \ ++ vc4-kms-vga666.dtbo \ ++ vga666.dtbo \ ++ vl805.dtbo \ ++ w1-gpio.dtbo \ ++ w1-gpio-pullup.dtbo \ ++ w5500.dtbo \ ++ watterott-display.dtbo \ ++ waveshare-can-fd-hat-mode-a.dtbo \ ++ waveshare-can-fd-hat-mode-b.dtbo \ ++ wittypi.dtbo \ ++ wm8960-soundcard.dtbo ++ ++targets += dtbs dtbs_install ++targets += $(dtbo-y) ++ ++always-y := $(dtbo-y) ++clean-files := *.dtbo +diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README +new file mode 100644 +index 000000000000..90d861b85c9e +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/README +@@ -0,0 +1,4513 @@ ++Introduction ++============ ++ ++This directory contains Device Tree overlays. Device Tree makes it possible ++to support many hardware configurations with a single kernel and without the ++need to explicitly load or blacklist kernel modules. Note that this isn't a ++"pure" Device Tree configuration (c.f. MACH_BCM2835) - some on-board devices ++are still configured by the board support code, but the intention is to ++eventually reach that goal. ++ ++On Raspberry Pi, Device Tree usage is controlled from /boot/config.txt. By ++default, the Raspberry Pi kernel boots with device tree enabled. You can ++completely disable DT usage (for now) by adding: ++ ++ device_tree= ++ ++to your config.txt, which should cause your Pi to revert to the old way of ++doing things after a reboot. ++ ++In /boot you will find a .dtb for each base platform. This describes the ++hardware that is part of the Raspberry Pi board. The loader (start.elf and its ++siblings) selects the .dtb file appropriate for the platform by name, and reads ++it into memory. At this point, all of the optional interfaces (i2c, i2s, spi) ++are disabled, but they can be enabled using Device Tree parameters: ++ ++ dtparam=i2c=on,i2s=on,spi=on ++ ++However, this shouldn't be necessary in many use cases because loading an ++overlay that requires one of those interfaces will cause it to be enabled ++automatically, and it is advisable to only enable interfaces if they are ++needed. ++ ++Configuring additional, optional hardware is done using Device Tree overlays ++(see below). ++ ++GPIO numbering uses the hardware pin numbering scheme (aka BCM scheme) and ++not the physical pin numbers. ++ ++raspi-config ++============ ++ ++The Advanced Options section of the raspi-config utility can enable and disable ++Device Tree use, as well as toggling the I2C and SPI interfaces. Note that it ++is possible to both enable an interface and blacklist the driver, if for some ++reason you should want to defer the loading. ++ ++Modules ++======= ++ ++As well as describing the hardware, Device Tree also gives enough information ++to allow suitable driver modules to be located and loaded, with the corollary ++that unneeded modules are not loaded. As a result it should be possible to ++remove lines from /etc/modules, and /etc/modprobe.d/raspi-blacklist.conf can ++have its contents deleted (or commented out). ++ ++Using Overlays ++============== ++ ++Overlays are loaded using the "dtoverlay" config.txt setting. As an example, ++consider I2C Real Time Clock drivers. In the pre-DT world these would be loaded ++by writing a magic string comprising a device identifier and an I2C address to ++a special file in /sys/class/i2c-adapter, having first loaded the driver for ++the I2C interface and the RTC device - something like this: ++ ++ modprobe i2c-bcm2835 ++ modprobe rtc-ds1307 ++ echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device ++ ++With DT enabled, this becomes a line in config.txt: ++ ++ dtoverlay=i2c-rtc,ds1307 ++ ++This causes the file /boot/overlays/i2c-rtc.dtbo to be loaded and a "node" ++describing the DS1307 I2C device to be added to the Device Tree for the Pi. By ++default it usees address 0x68, but this can be modified with an additional DT ++parameter: ++ ++ dtoverlay=i2c-rtc,ds1307,addr=0x68 ++ ++Parameters usually have default values, although certain parameters are ++mandatory. See the list of overlays below for a description of the parameters ++and their defaults. ++ ++Making new Overlays based on existing Overlays ++============================================== ++ ++Recent overlays have been designed in a more general way, so that they can be ++adapted to hardware by changing their parameters. When you have additional ++hardware with more than one device of a kind, you end up using the same overlay ++multiple times with other parameters, e.g. ++ ++ # 2 CAN FD interfaces on spi but with different pins ++ dtoverlay=mcp251xfd,spi0-0,interrupt=25 ++ dtoverlay=mcp251xfd,spi0-1,interrupt=24 ++ ++ # a realtime clock on i2c ++ dtoverlay=i2c-rtc,pcf85063 ++ ++While this approach does work, it requires knowledge about the hardware design. ++It is more feasible to simplify things for the end user by providing a single ++overlay as it is done the traditional way. ++ ++A new overlay can be generated by using ovmerge utility. ++https://github.com/raspberrypi/utils/blob/master/ovmerge/ovmerge ++ ++To generate an overlay for the above configuration we pass the configuration ++to ovmerge and add the -c flag. ++ ++ ovmerge -c mcp251xfd-overlay.dts,spi0-0,interrupt=25 \ ++ mcp251xfd-overlay.dts,spi0-1,interrupt=24 \ ++ i2c-rtc-overlay.dts,pcf85063 \ ++ >> merged-overlay.dts ++ ++The -c option writes the command above as a comment into the overlay as ++a marker that this overlay is generated and how it was generated. ++After compiling the overlay it can be loaded in a single line. ++ ++ dtoverlay=merged ++ ++It does the same as the original configuration but without parameters. ++ ++The Overlay and Parameter Reference ++=================================== ++ ++N.B. When editing this file, please preserve the indentation levels to make it ++simple to parse programmatically. NO HARD TABS. ++ ++ ++Name: ++Info: Configures the base Raspberry Pi hardware ++Load: ++Params: ++ ant1 Select antenna 1 (default). CM4 only. ++ ++ ant2 Select antenna 2. CM4 only. ++ ++ noant Disable both antennas. CM4 only. ++ ++ audio Set to "on" to enable the onboard ALSA audio ++ interface (default "off") ++ ++ axiperf Set to "on" to enable the AXI bus performance ++ monitors. ++ See /sys/kernel/debug/raspberrypi_axi_monitor ++ for the results. ++ ++ cam0_reg Enables CAM 0 regulator. CM1 & 3 only. ++ ++ cam0_reg_gpio Set GPIO for CAM 0 regulator. Default 30. ++ CM1 & 3 only. ++ ++ cam1_reg Enables CAM 1 regulator. CM1 & 3 only. ++ ++ cam1_reg_gpio Set GPIO for CAM 1 regulator. Default 2. ++ CM1 & 3 only. ++ ++ eee Enable Energy Efficient Ethernet support for ++ compatible devices (default "on"). See also ++ "tx_lpi_timer". Pi3B+ only. ++ ++ eth_downshift_after Set the number of auto-negotiation failures ++ after which the 1000Mbps modes are disabled. ++ Legal values are 2, 3, 4, 5 and 0, where ++ 0 means never downshift (default 2). Pi3B+ only. ++ ++ eth_led0 Set mode of LED0 - amber on Pi3B+ (default "1"), ++ green on Pi4 (default "0"). ++ The legal values are: ++ ++ Pi3B+ ++ ++ 0=link/activity 1=link1000/activity ++ 2=link100/activity 3=link10/activity ++ 4=link100/1000/activity 5=link10/1000/activity ++ 6=link10/100/activity 14=off 15=on ++ ++ Pi4 ++ ++ 0=Speed/Activity 1=Speed ++ 2=Flash activity 3=FDX ++ 4=Off 5=On ++ 6=Alt 7=Speed/Flash ++ 8=Link 9=Activity ++ ++ eth_led1 Set mode of LED1 - green on Pi3B+ (default "6"), ++ amber on Pi4 (default "8"). See eth_led0 for ++ legal values. ++ ++ eth_max_speed Set the maximum speed a link is allowed ++ to negotiate. Legal values are 10, 100 and ++ 1000 (default 1000). Pi3B+ only. ++ ++ hdmi Set to "off" to disable the HDMI interface ++ (default "on") ++ ++ i2c_arm Set to "on" to enable the ARM's i2c interface ++ (default "off") ++ ++ i2c_vc Set to "on" to enable the i2c interface ++ usually reserved for the VideoCore processor ++ (default "off") ++ ++ i2c An alias for i2c_arm ++ ++ i2c_arm_baudrate Set the baudrate of the ARM's i2c interface ++ (default "100000") ++ ++ i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface ++ (default "100000") ++ ++ i2c_baudrate An alias for i2c_arm_baudrate ++ ++ i2s Set to "on" to enable the i2s interface ++ (default "off") ++ ++ krnbt Set to "on" to enable autoprobing of Bluetooth ++ driver without need of hciattach/btattach ++ (default "off") ++ ++ krnbt_baudrate Set the baudrate of the PL011 UART when used ++ with krnbt=on ++ ++ pcie Set to "off" to disable the PCIe interface ++ (default "on") ++ (2711 only, but not applicable on CM4S) ++ N.B. USB-A ports on 4B are subsequently disabled ++ ++ spi Set to "on" to enable the spi interfaces ++ (default "off") ++ ++ spi_dma4 Use to enable 40-bit DMA on spi interfaces ++ (the assigned value doesn't matter) ++ (2711 only) ++ ++ random Set to "on" to enable the hardware random ++ number generator (default "on") ++ ++ sd Set to "off" to disable the SD card (or eMMC on ++ non-lite SKU of CM4). ++ (default "on") ++ ++ sd_overclock Clock (in MHz) to use when the MMC framework ++ requests 50MHz ++ ++ sd_poll_once Looks for a card once after booting. Useful ++ for network booting scenarios to avoid the ++ overhead of continuous polling. N.B. Using ++ this option restricts the system to using a ++ single card per boot (or none at all). ++ (default off) ++ ++ sd_force_pio Disable DMA support for SD driver (default off) ++ ++ sd_pio_limit Number of blocks above which to use DMA for ++ SD card (default 1) ++ ++ sd_debug Enable debug output from SD driver (default off) ++ ++ sdio_overclock Clock (in MHz) to use when the MMC framework ++ requests 50MHz for the SDIO/WLAN interface. ++ ++ tx_lpi_timer Set the delay in microseconds between going idle ++ and entering the low power state (default 600). ++ Requires EEE to be enabled - see "eee". ++ ++ uart0 Set to "off" to disable uart0 (default "on") ++ ++ uart1 Set to "on" or "off" to enable or disable uart1 ++ (default varies) ++ ++ watchdog Set to "on" to enable the hardware watchdog ++ (default "off") ++ ++ act_led_trigger Choose which activity the LED tracks. ++ Use "heartbeat" for a nice load indicator. ++ (default "mmc") ++ ++ act_led_activelow Set to "on" to invert the sense of the LED ++ (default "off") ++ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led ++ overlay. ++ ++ act_led_gpio Set which GPIO to use for the activity LED ++ (in case you want to connect it to an external ++ device) ++ (default "16" on a non-Plus board, "47" on a ++ Plus or Pi 2) ++ N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led ++ overlay. ++ ++ pwr_led_trigger ++ pwr_led_activelow ++ pwr_led_gpio ++ As for act_led_*, but using the PWR LED. ++ Not available on Model A/B boards. ++ ++ N.B. It is recommended to only enable those interfaces that are needed. ++ Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc ++ interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.) ++ Note also that i2c, i2c_arm and i2c_vc are aliases for the physical ++ interfaces i2c0 and i2c1. Use of the numeric variants is still possible ++ but deprecated because the ARM/VC assignments differ between board ++ revisions. The same board-specific mapping applies to i2c_baudrate, ++ and the other i2c baudrate parameters. ++ ++ ++Name: act-led ++Info: Pi 3B, 3B+, 3A+ and 4B use a GPIO expander to drive the LEDs which can ++ only be accessed from the VPU. There is a special driver for this with a ++ separate DT node, which has the unfortunate consequence of breaking the ++ act_led_gpio and act_led_activelow dtparams. ++ This overlay changes the GPIO controller back to the standard one and ++ restores the dtparams. ++Load: dtoverlay=act-led,= ++Params: activelow Set to "on" to invert the sense of the LED ++ (default "off") ++ ++ gpio Set which GPIO to use for the activity LED ++ (in case you want to connect it to an external ++ device) ++ REQUIRED ++ ++ ++Name: adafruit-st7735r ++Info: Overlay for the SPI-connected Adafruit 1.8" 160x128 or 128x128 displays, ++ based on the ST7735R chip. ++ This overlay uses the newer DRM/KMS "Tiny" driver. ++Load: dtoverlay=adafruit-st7735r,= ++Params: 128x128 Select the 128x128 driver (default 160x128) ++ rotate Display rotation {0,90,180,270} (default 90) ++ speed SPI bus speed in Hz (default 4000000) ++ dc_pin GPIO pin for D/C (default 24) ++ reset_pin GPIO pin for RESET (default 25) ++ led_pin GPIO used to control backlight (default 18) ++ ++ ++Name: adafruit18 ++Info: Overlay for the SPI-connected Adafruit 1.8" display (based on the ++ ST7735R chip). It includes support for the "green tab" version. ++ This overlay uses the older fbtft driver. ++Load: dtoverlay=adafruit18,= ++Params: green Use the adafruit18_green variant. ++ rotate Display rotation {0,90,180,270} ++ speed SPI bus speed in Hz (default 4000000) ++ fps Display frame rate in Hz ++ bgr Enable BGR mode (default off) ++ debug Debug output level {0-7} ++ dc_pin GPIO pin for D/C (default 24) ++ reset_pin GPIO pin for RESET (default 25) ++ led_pin GPIO used to control backlight (default 18) ++ ++ ++Name: adau1977-adc ++Info: Overlay for activation of ADAU1977 ADC codec over I2C for control ++ and I2S for data. ++Load: dtoverlay=adau1977-adc ++Params: ++ ++ ++Name: adau7002-simple ++Info: Overlay for the activation of ADAU7002 stereo PDM to I2S converter. ++Load: dtoverlay=adau7002-simple,= ++Params: card-name Override the default, "adau7002", card name. ++ ++ ++Name: ads1015 ++Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C ++Load: dtoverlay=ads1015,= ++Params: addr I2C bus address of device. Set based on how the ++ addr pin is wired. (default=0x48 assumes addr ++ is pulled to GND) ++ cha_enable Enable virtual channel a. (default=true) ++ cha_cfg Set the configuration for virtual channel a. ++ (default=4 configures this channel for the ++ voltage at A0 with respect to GND) ++ cha_datarate Set the datarate (samples/sec) for this channel. ++ (default=4 sets 1600 sps) ++ cha_gain Set the gain of the Programmable Gain ++ Amplifier for this channel. (default=2 sets the ++ full scale of the channel to 2.048 Volts) ++ ++ Channel (ch) parameters can be set for each enabled channel. ++ A maximum of 4 channels can be enabled (letters a thru d). ++ For more information refer to the device datasheet at: ++ http://www.ti.com/lit/ds/symlink/ads1015.pdf ++ ++ ++Name: ads1115 ++Info: Texas Instruments ADS1115 ADC ++Load: dtoverlay=ads1115,[=] ++Params: addr I2C bus address of device. Set based on how the ++ addr pin is wired. (default=0x48 assumes addr ++ is pulled to GND) ++ cha_enable Enable virtual channel a. ++ cha_cfg Set the configuration for virtual channel a. ++ (default=4 configures this channel for the ++ voltage at A0 with respect to GND) ++ cha_datarate Set the datarate (samples/sec) for this channel. ++ (default=7 sets 860 sps) ++ cha_gain Set the gain of the Programmable Gain ++ Amplifier for this channel. (Default 1 sets the ++ full scale of the channel to 4.096 Volts) ++ ++ Channel parameters can be set for each enabled channel. ++ A maximum of 4 channels can be enabled (letters a thru d). ++ For more information refer to the device datasheet at: ++ http://www.ti.com/lit/ds/symlink/ads1115.pdf ++ ++ ++Name: ads7846 ++Info: ADS7846 Touch controller ++Load: dtoverlay=ads7846,= ++Params: cs SPI bus Chip Select (default 1) ++ speed SPI bus speed (default 2MHz, max 3.25MHz) ++ penirq GPIO used for PENIRQ. REQUIRED ++ penirq_pull Set GPIO pull (default 0=none, 2=pullup) ++ swapxy Swap x and y axis ++ xmin Minimum value on the X axis (default 0) ++ ymin Minimum value on the Y axis (default 0) ++ xmax Maximum value on the X axis (default 4095) ++ ymax Maximum value on the Y axis (default 4095) ++ pmin Minimum reported pressure value (default 0) ++ pmax Maximum reported pressure value (default 65535) ++ xohms Touchpanel sensitivity (X-plate resistance) ++ (default 400) ++ ++ penirq is required and usually xohms (60-100) has to be set as well. ++ Apart from that, pmax (255) and swapxy are also common. ++ The rest of the calibration can be done with xinput-calibrator. ++ See: github.com/notro/fbtft/wiki/FBTFT-on-Raspian ++ Device Tree binding document: ++ www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt ++ ++ ++Name: adv7282m ++Info: Analog Devices ADV7282M analogue video to CSI2 bridge. ++ Uses Unicam1, which is the standard camera connector on most Pi ++ variants. ++Load: dtoverlay=adv7282m,= ++Params: addr Overrides the I2C address (default 0x21) ++ media-controller Configure use of Media Controller API for ++ configuring the sensor (default off) ++ ++ ++Name: adv728x-m ++Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges. ++ This is a wrapper for adv7282m, and defaults to ADV7282M. ++Load: dtoverlay=adv728x-m,= ++Params: addr Overrides the I2C address (default 0x21) ++ adv7280m Select ADV7280-M. ++ adv7281m Select ADV7281-M. ++ adv7281ma Select ADV7281-MA. ++ media-controller Configure use of Media Controller API for ++ configuring the sensor (default off) ++ ++ ++Name: akkordion-iqdacplus ++Info: Configures the Digital Dreamtime Akkordion Music Player (based on the ++ OEM IQAudIO DAC+ or DAC Zero module). ++Load: dtoverlay=akkordion-iqdacplus,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ dtoverlay=akkordion-iqdacplus,24db_digital_gain ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: allo-boss-dac-pcm512x-audio ++Info: Configures the Allo Boss DAC audio cards. ++Load: dtoverlay=allo-boss-dac-pcm512x-audio, ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=allo-boss-dac-pcm512x-audio, ++ 24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ slave Force Boss DAC into slave mode, using Pi a ++ master for bit clock and frame clock. Enable ++ with "dtoverlay=allo-boss-dac-pcm512x-audio, ++ slave" ++ ++ ++Name: allo-boss2-dac-audio ++Info: Configures the Allo Boss2 DAC audio card ++Load: dtoverlay=allo-boss2-dac-audio ++Params: ++ ++ ++Name: allo-digione ++Info: Configures the Allo Digione audio card ++Load: dtoverlay=allo-digione ++Params: ++ ++ ++Name: allo-katana-dac-audio ++Info: Configures the Allo Katana DAC audio card ++Load: dtoverlay=allo-katana-dac-audio ++Params: ++ ++ ++Name: allo-piano-dac-pcm512x-audio ++Info: Configures the Allo Piano DAC (2.0/2.1) audio cards. ++ (NB. This initial support is for 2.0 channel audio ONLY! ie. stereo. ++ The subwoofer outputs on the Piano 2.1 are not currently supported!) ++Load: dtoverlay=allo-piano-dac-pcm512x-audio, ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: allo-piano-dac-plus-pcm512x-audio ++Info: Configures the Allo Piano DAC (2.1) audio cards. ++Load: dtoverlay=allo-piano-dac-plus-pcm512x-audio, ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24db_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ glb_mclk This option is only with Kali board. If enabled, ++ MCLK for Kali is used and PLL is disabled for ++ better voice quality. (default Off) ++ ++ ++Name: anyspi ++Info: Universal device tree overlay for SPI devices ++ ++ Just specify the SPI address and device name ("compatible" property). ++ This overlay lacks any device-specific parameter support! ++ ++ For devices on spi1 or spi2, the interfaces should be enabled ++ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++ ++ Examples: ++ 1. SPI NOR flash on spi0.1, maximum SPI clock frequency 45MHz: ++ dtoverlay=anyspi:spi0-1,dev="jedec,spi-nor",speed=45000000 ++ 2. MCP3204 ADC on spi1.2, maximum SPI clock frequency 500kHz: ++ dtoverlay=anyspi:spi1-2,dev="microchip,mcp3204" ++Load: dtoverlay=anyspi,= ++Params: spi- Configure device at spi, cs ++ (boolean, required) ++ dev Set device name to search compatible module ++ (string, required) ++ speed Set SPI clock frequency in Hz ++ (integer, optional, default 500000) ++ ++ ++Name: apds9960 ++Info: Configures the AVAGO APDS9960 digital proximity, ambient light, RGB and ++ gesture sensor ++Load: dtoverlay=apds9960,= ++Params: gpiopin GPIO used for INT (default 4) ++ noints Disable the interrupt GPIO line. ++ ++ ++Name: applepi-dac ++Info: Configures the Orchard Audio ApplePi-DAC audio card ++Load: dtoverlay=applepi-dac ++Params: ++ ++ ++Name: arducam-64mp ++Info: Arducam 64MP camera module. ++ Uses Unicam 1, which is the standard camera connector on most Pi ++ variants. ++Load: dtoverlay=arducam-64mp,= ++Params: rotation Mounting rotation of the camera sensor (0 or ++ 180, default 0) ++ orientation Sensor orientation (0 = front, 1 = rear, ++ 2 = external, default external) ++ media-controller Configure use of Media Controller API for ++ configuring the sensor (default on) ++ cam0 Adopt the default configuration for CAM0 on a ++ Compute Module (CSI0, i2c_vc, and cam0_reg). ++ ++ ++Name: arducam-pivariety ++Info: Arducam Pivariety camera module. ++ Uses Unicam 1, which is the standard camera connector on most Pi ++ variants. ++Load: dtoverlay=arducam-pivariety,= ++Params: rotation Mounting rotation of the camera sensor (0 or ++ 180, default 0) ++ orientation Sensor orientation (0 = front, 1 = rear, ++ 2 = external, default external) ++ media-controller Configure use of Media Controller API for ++ configuring the sensor (default on) ++ cam0 Adopt the default configuration for CAM0 on a ++ Compute Module (CSI0, i2c_vc, and cam0_reg). ++ ++ ++Name: at86rf233 ++Info: Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver, ++ connected to spi0.0 ++Load: dtoverlay=at86rf233,= ++Params: interrupt GPIO used for INT (default 23) ++ reset GPIO used for Reset (default 24) ++ sleep GPIO used for Sleep (default 25) ++ speed SPI bus speed in Hz (default 3000000) ++ trim Fine tuning of the internal capacitance ++ arrays (0=+0pF, 15=+4.5pF, default 15) ++ ++ ++Name: audioinjector-addons ++Info: Configures the audioinjector.net audio add on soundcards ++Load: dtoverlay=audioinjector-addons,= ++Params: non-stop-clocks Keeps the clocks running even when the stream ++ is paused or stopped (default off) ++ ++ ++Name: audioinjector-bare-i2s ++Info: Configures the audioinjector.net audio bare i2s soundcard ++Load: dtoverlay=audioinjector-bare-i2s ++Params: ++ ++ ++Name: audioinjector-isolated-soundcard ++Info: Configures the audioinjector.net isolated soundcard ++Load: dtoverlay=audioinjector-isolated-soundcard ++Params: ++ ++ ++Name: audioinjector-ultra ++Info: Configures the audioinjector.net ultra soundcard ++Load: dtoverlay=audioinjector-ultra ++Params: ++ ++ ++Name: audioinjector-wm8731-audio ++Info: Configures the audioinjector.net audio add on soundcard ++Load: dtoverlay=audioinjector-wm8731-audio ++Params: ++ ++ ++Name: audiosense-pi ++Info: Configures the audiosense-pi add on soundcard ++ For more information refer to ++ https://gitlab.com/kakar0t/audiosense-pi ++Load: dtoverlay=audiosense-pi ++Params: ++ ++ ++Name: audremap ++Info: Switches PWM sound output to GPIOs on the 40-pin header ++Load: dtoverlay=audremap,= ++Params: swap_lr Reverse the channel allocation, which will also ++ swap the audio jack outputs (default off) ++ enable_jack Don't switch off the audio jack output ++ (default off) ++ pins_12_13 Select GPIOs 12 & 13 (default) ++ pins_18_19 Select GPIOs 18 & 19 ++ ++ ++Name: balena-fin ++Info: Overlay that enables WLAN, Bluetooth and the GPIO expander on the ++ balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite. ++Load: dtoverlay=balena-fin ++Params: ++ ++ ++Name: bmp085_i2c-sensor ++Info: This overlay is now deprecated - see i2c-sensor ++Load: ++ ++ ++Name: camera-mux-2port ++Info: Configures a 2 port camera multiplexer ++ Note that currently ALL IMX290 modules share a common clock, therefore ++ all modules will need to have the same clock frequency. ++Load: dtoverlay=camera-mux-2port,= ++Params: cam0-imx219 Select IMX219 for camera on port 0 ++ cam0-imx258 Select IMX258 for camera on port 0 ++ cam0-imx290 Select IMX290 for camera on port 0 ++ cam0-imx477 Select IMX477 for camera on port 0 ++ cam0-ov2311 Select OV2311 for camera on port 0 ++ cam0-ov5647 Select OV5647 for camera on port 0 ++ cam0-ov7251 Select OV7251 for camera on port 0 ++ cam0-ov9281 Select OV9281 for camera on port 0 ++ cam0-imx290-clk-freq Set clock frequency for an IMX290 on port 0 ++ cam1-imx219 Select IMX219 for camera on port 1 ++ cam1-imx258 Select IMX258 for camera on port 1 ++ cam1-imx290 Select IMX290 for camera on port 1 ++ cam1-imx477 Select IMX477 for camera on port 1 ++ cam1-ov2311 Select OV2311 for camera on port 1 ++ cam1-ov5647 Select OV5647 for camera on port 1 ++ cam1-ov7251 Select OV7251 for camera on port 1 ++ cam1-ov9281 Select OV9281 for camera on port 1 ++ cam1-imx290-clk-freq Set clock frequency for an IMX290 on port 1 ++ ++ ++Name: camera-mux-4port ++Info: Configures a 4 port camera multiplexer ++ Note that currently ALL IMX290 modules share a common clock, therefore ++ all modules will need to have the same clock frequency. ++Load: dtoverlay=camera-mux-4port,= ++Params: cam0-imx219 Select IMX219 for camera on port 0 ++ cam0-imx258 Select IMX258 for camera on port 0 ++ cam0-imx290 Select IMX290 for camera on port 0 ++ cam0-imx477 Select IMX477 for camera on port 0 ++ cam0-ov2311 Select OV2311 for camera on port 0 ++ cam0-ov5647 Select OV5647 for camera on port 0 ++ cam0-ov7251 Select OV7251 for camera on port 0 ++ cam0-ov9281 Select OV9281 for camera on port 0 ++ cam0-imx290-clk-freq Set clock frequency for an IMX290 on port 0 ++ cam1-imx219 Select IMX219 for camera on port 1 ++ cam1-imx258 Select IMX258 for camera on port 1 ++ cam1-imx290 Select IMX290 for camera on port 1 ++ cam1-imx477 Select IMX477 for camera on port 1 ++ cam1-ov2311 Select OV2311 for camera on port 1 ++ cam1-ov5647 Select OV5647 for camera on port 1 ++ cam1-ov7251 Select OV7251 for camera on port 1 ++ cam1-ov9281 Select OV9281 for camera on port 1 ++ cam1-imx290-clk-freq Set clock frequency for an IMX290 on port 1 ++ cam2-imx219 Select IMX219 for camera on port 2 ++ cam2-imx258 Select IMX258 for camera on port 2 ++ cam2-imx290 Select IMX290 for camera on port 2 ++ cam2-imx477 Select IMX477 for camera on port 2 ++ cam2-ov2311 Select OV2311 for camera on port 2 ++ cam2-ov5647 Select OV5647 for camera on port 2 ++ cam2-ov7251 Select OV7251 for camera on port 2 ++ cam2-ov9281 Select OV9281 for camera on port 2 ++ cam2-imx290-clk-freq Set clock frequency for an IMX290 on port 2 ++ cam3-imx219 Select IMX219 for camera on port 3 ++ cam3-imx258 Select IMX258 for camera on port 3 ++ cam3-imx290 Select IMX290 for camera on port 3 ++ cam3-imx477 Select IMX477 for camera on port 3 ++ cam3-ov2311 Select OV2311 for camera on port 3 ++ cam3-ov5647 Select OV5647 for camera on port 3 ++ cam3-ov7251 Select OV7251 for camera on port 3 ++ cam3-ov9281 Select OV9281 for camera on port 3 ++ cam3-imx290-clk-freq Set clock frequency for an IMX290 on port 3 ++ ++ ++Name: cap1106 ++Info: Enables the ability to use the cap1106 touch sensor as a keyboard ++Load: dtoverlay=cap1106,= ++Params: int_pin GPIO pin for interrupt signal (default 23) ++ ++ ++Name: chipdip-dac ++Info: Configures Chip Dip audio cards. ++Load: dtoverlay=chipdip-dac ++Params: ++ ++ ++Name: cirrus-wm5102 ++Info: Configures the Cirrus Logic Audio Card ++Load: dtoverlay=cirrus-wm5102 ++Params: ++ ++ ++Name: cma ++Info: Set custom CMA sizes, only use if you know what you are doing, might ++ clash with other overlays like vc4-fkms-v3d and vc4-kms-v3d. ++Load: dtoverlay=cma,= ++Params: cma-512 CMA is 512MB (needs 1GB) ++ cma-448 CMA is 448MB (needs 1GB) ++ cma-384 CMA is 384MB (needs 1GB) ++ cma-320 CMA is 320MB (needs 1GB) ++ cma-256 CMA is 256MB (needs 1GB) ++ cma-192 CMA is 192MB (needs 1GB) ++ cma-128 CMA is 128MB ++ cma-96 CMA is 96MB ++ cma-64 CMA is 64MB ++ cma-size CMA size in bytes, 4MB aligned ++ cma-default Use upstream's default value ++ ++ ++Name: cutiepi-panel ++Info: 8" TFT LCD display and touch panel used by cutiepi.io ++Load: dtoverlay=cutiepi-panel ++Params: ++ ++ ++Name: dacberry400 ++Info: Configures the dacberry400 add on soundcard ++Load: dtoverlay=dacberry400 ++Params: ++ ++ ++Name: dht11 ++Info: Overlay for the DHT11/DHT21/DHT22 humidity/temperature sensors ++ Also sometimes found with the part number(s) AM230x. ++Load: dtoverlay=dht11,= ++Params: gpiopin GPIO connected to the sensor's DATA output. ++ (default 4) ++ ++ ++Name: dionaudio-kiwi ++Info: Configures the Dion Audio KIWI STREAMER ++Load: dtoverlay=dionaudio-kiwi ++Params: ++ ++ ++Name: dionaudio-loco ++Info: Configures the Dion Audio LOCO DAC-AMP ++Load: dtoverlay=dionaudio-loco ++Params: ++ ++ ++Name: dionaudio-loco-v2 ++Info: Configures the Dion Audio LOCO-V2 DAC-AMP ++Load: dtoverlay=dionaudio-loco-v2,= ++Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec ++ Digital volume control. Enable with ++ "dtoverlay=hifiberry-dacplus,24db_digital_gain" ++ (The default behaviour is that the Digital ++ volume control is limited to a maximum of ++ 0dB. ie. it can attenuate but not provide ++ gain. For most users, this will be desired ++ as it will prevent clipping. By appending ++ the 24dB_digital_gain parameter, the Digital ++ volume control will allow up to 24dB of ++ gain. If this parameter is enabled, it is the ++ responsibility of the user to ensure that ++ the Digital volume control is set to a value ++ that does not result in clipping/distortion!) ++ ++ ++Name: disable-bt ++Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring ++ UART0/ttyAMA0 over GPIOs 14 & 15. ++ N.B. To disable the systemd service that initialises the modem so it ++ doesn't use the UART, use 'sudo systemctl disable hciuart'. ++Load: dtoverlay=disable-bt ++Params: ++ ++ ++Name: disable-wifi ++Info: Disable onboard WLAN on Pi 3B, 3B+, 3A+, 4B and Zero W. ++Load: dtoverlay=disable-wifi ++Params: ++ ++ ++Name: dpi18 ++Info: Overlay for a generic 18-bit DPI display ++ This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output ++ 2-3 seconds after the kernel has started. ++Load: dtoverlay=dpi18 ++Params: ++ ++ ++Name: dpi18cpadhi ++Info: Overlay for a generic 18-bit DPI display (in 'mode 6' connection scheme) ++ This uses GPIOs 0-9,12-17,20-25 (so no I2C, uart etc.), and activates ++ the output 3-3 seconds after the kernel has started. ++Load: dtoverlay=dpi18cpadhi ++Params: ++ ++ ++Name: dpi24 ++Info: Overlay for a generic 24-bit DPI display ++ This uses GPIOs 0-27 (so no I2C, uart etc.), and activates the output ++ 2-3 seconds after the kernel has started. ++Load: dtoverlay=dpi24 ++Params: ++ ++ ++Name: draws ++Info: Configures the NW Digital Radio DRAWS Hat ++ ++ The board includes an ADC to measure various board values and also ++ provides two analog user inputs on the expansion header. The ADC ++ can be configured for various sample rates and gain values to adjust ++ the input range. Tables describing the two parameters follow. ++ ++ ADC Gain Values: ++ 0 = +/- 6.144V ++ 1 = +/- 4.096V ++ 2 = +/- 2.048V ++ 3 = +/- 1.024V ++ 4 = +/- 0.512V ++ 5 = +/- 0.256V ++ 6 = +/- 0.256V ++ 7 = +/- 0.256V ++ ++ ADC Datarate Values: ++ 0 = 128sps ++ 1 = 250sps ++ 2 = 490sps ++ 3 = 920sps ++ 4 = 1600sps (default) ++ 5 = 2400sps ++ 6 = 3300sps ++ 7 = 3300sps ++Load: dtoverlay=draws,= ++Params: draws_adc_ch4_gain Sets the full scale resolution of the ADCs ++ input voltage sensor (default 1) ++ ++ draws_adc_ch4_datarate Sets the datarate of the ADCs input voltage ++ sensor ++ ++ draws_adc_ch5_gain Sets the full scale resolution of the ADCs ++ 5V rail voltage sensor (default 1) ++ ++ draws_adc_ch5_datarate Sets the datarate of the ADCs 4V rail voltage ++ sensor ++ ++ draws_adc_ch6_gain Sets the full scale resolution of the ADCs ++ AIN2 input (default 2) ++ ++ draws_adc_ch6_datarate Sets the datarate of the ADCs AIN2 input ++ ++ draws_adc_ch7_gain Sets the full scale resolution of the ADCs ++ AIN3 input (default 2) ++ ++ draws_adc_ch7_datarate Sets the datarate of the ADCs AIN3 input ++ ++ alsaname Name of the ALSA audio device (default "draws") ++ ++ ++Name: dwc-otg ++Info: Selects the dwc_otg USB controller driver which has fiq support. This ++ is the default on all except the Pi Zero which defaults to dwc2. ++Load: dtoverlay=dwc-otg ++Params: ++ ++ ++Name: dwc2 ++Info: Selects the dwc2 USB controller driver ++Load: dtoverlay=dwc2,= ++Params: dr_mode Dual role mode: "host", "peripheral" or "otg" ++ ++ g-rx-fifo-size Size of rx fifo size in gadget mode ++ ++ g-np-tx-fifo-size Size of non-periodic tx fifo size in gadget ++ mode ++ ++ ++[ The ds1307-rtc overlay has been deleted. See i2c-rtc. ] ++ ++ ++Name: edt-ft5406 ++Info: Overlay for the EDT FT5406 touchscreen on the CSI/DSI I2C interface. ++ This works with the Raspberry Pi 7" touchscreen when not being polled ++ by the firmware. ++ You MUST use either "disable_touchscreen=1" or "ignore_lcd=1" in ++ config.txt to stop the firmware polling the touchscreen. ++Load: dtoverlay=edt-ft5406,= ++Params: sizex Touchscreen size x (default 800) ++ sizey Touchscreen size y (default 480) ++ invx Touchscreen inverted x axis ++ invy Touchscreen inverted y axis ++ swapxy Touchscreen swapped x y axis ++ ++ ++Name: enc28j60 ++Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI0 ++Load: dtoverlay=enc28j60,= ++Params: int_pin GPIO used for INT (default 25) ++ ++ speed SPI bus speed (default 12000000) ++ ++ ++Name: enc28j60-spi2 ++Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI2 ++Load: dtoverlay=enc28j60-spi2,= ++Params: int_pin GPIO used for INT (default 39) ++ ++ speed SPI bus speed (default 12000000) ++ ++ ++Name: exc3000 ++Info: Enables I2C connected EETI EXC3000 multiple touch controller using ++ GPIO 4 (pin 7 on GPIO header) for interrupt. ++Load: dtoverlay=exc3000,= ++Params: interrupt GPIO used for interrupt (default 4) ++ sizex Touchscreen size x (default 4096) ++ sizey Touchscreen size y (default 4096) ++ invx Touchscreen inverted x axis ++ invy Touchscreen inverted y axis ++ swapxy Touchscreen swapped x y axis ++ ++ ++Name: fbtft ++Info: Overlay for SPI-connected displays using the fbtft drivers. ++ ++ This overlay seeks to replace the functionality provided by fbtft_device ++ which is now gone from the kernel. ++ ++ Most displays from fbtft_device have been ported over. ++ Example: ++ dtoverlay=fbtft,spi0-0,rpi-display,reset_pin=23,dc_pin=24,led_pin=18,rotate=270 ++ ++ It is also possible to specify the controller (this will use the default ++ init sequence in the driver). ++ Example: ++ dtoverlay=fbtft,spi0-0,ili9341,bgr,reset_pin=23,dc_pin=24,led_pin=18,rotate=270 ++ ++ For devices on spi1 or spi2, the interfaces should be enabled ++ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++ ++ The following features of fbtft_device have not been ported over: ++ - parallel bus is not supported ++ - the init property which overrides the controller initialization ++ sequence is not supported as a parameter due to memory limitations in ++ the bootloader responsible for applying the overlay. ++ ++ See https://github.com/notro/fbtft/wiki/FBTFT-RPI-overlays for how to ++ create an overlay. ++ ++Load: dtoverlay=fbtft,= ++Params: ++ spi- Configure device at spi, cs ++ (boolean, required) ++ speed SPI bus speed in Hz (default 32000000) ++ cpha Shifted clock phase (CPHA) mode ++ cpol Inverse clock polarity (CPOL) mode ++ ++ adafruit18 Adafruit 1.8 ++ adafruit22 Adafruit 2.2 (old) ++ adafruit22a Adafruit 2.2 ++ adafruit28 Adafruit 2.8 ++ adafruit13m Adafruit 1.3 OLED ++ admatec_c-berry28 C-Berry28 ++ dogs102 EA DOGS102 ++ er_tftm050_2 ER-TFTM070-2 ++ er_tftm070_5 ER-TFTM070-5 ++ ew24ha0 EW24HA0 ++ ew24ha0_9bit EW24HA0 in 9-bit mode ++ freetronicsoled128 Freetronics OLED128 ++ hy28a HY28A ++ hy28b HY28B ++ itdb28_spi ITDB02-2.8 with SPI interface circuit ++ mi0283qt-2 Watterott MI0283QT-2 ++ mi0283qt-9a Watterott MI0283QT-9A ++ nokia3310 Nokia 3310 ++ nokia3310a Nokia 3310a ++ nokia5110 Nokia 5110 ++ piscreen PiScreen ++ pitft Adafruit PiTFT 2.8 ++ pioled ILSoft OLED ++ rpi-display Watterott rpi-display ++ sainsmart18 Sainsmart 1.8 ++ sainsmart32_spi Sainsmart 3.2 with SPI interfce circuit ++ tinylcd35 TinyLCD 3.5 ++ tm022hdh26 Tianma TM022HDH26 ++ tontec35_9481 Tontect 3.5 with ILI9481 controller ++ tontec35_9486 Tontect 3.5 with ILI9486 controller ++ waveshare32b Waveshare 3.2 ++ waveshare22 Waveshare 2.2 ++ ++ bd663474 BD663474 display controller ++ hx8340bn HX8340BN display controller ++ hx8347d HX8347D display controller ++ hx8353d HX8353D display controller ++ hx8357d HX8357D display controller ++ ili9163 ILI9163 display controller ++ ili9320 ILI9320 display controller ++ ili9325 ILI9325 display controller ++ ili9340 ILI9340 display controller ++ ili9341 ILI9341 display controller ++ ili9481 ILI9481 display controller ++ ili9486 ILI9486 display controller ++ pcd8544 PCD8544 display controller ++ ra8875 RA8875 display controller ++ s6d02a1 S6D02A1 display controller ++ s6d1121 S6D1121 display controller ++ seps525 SEPS525 display controller ++ sh1106 SH1106 display controller ++ ssd1289 SSD1289 display controller ++ ssd1305 SSD1305 display controller ++ ssd1306 SSD1306 display controller ++ ssd1325 SSD1325 display controller ++ ssd1331 SSD1331 display controller ++ ssd1351 SSD1351 display controller ++ st7735r ST7735R display controller ++ st7789v ST7789V display controller ++ tls8204 TLS8204 display controller ++ uc1611 UC1611 display controller ++ uc1701 UC1701 display controller ++ upd161704 UPD161704 display controller ++ ++ width Display width in pixels ++ height Display height in pixels ++ regwidth Display controller register width (default is ++ driver specific) ++ buswidth Display bus interface width (default 8) ++ debug Debug output level {0-7} ++ rotate Display rotation {0, 90, 180, 270} (counter ++ clockwise). Not supported by all drivers. ++ bgr Enable BGR mode (default off). Use if Red and ++ Blue are swapped. Not supported by all drivers. ++ fps Frames per second (default 30). In effect this ++ states how long the driver will wait after video ++ memory has been changed until display update ++ transfer is started. ++ txbuflen Length of the FBTFT transmit buffer ++ (default 4096) ++ startbyte Sets the Start byte used by fb_ili9320, ++ fb_ili9325 and fb_hx8347d. Common value is 0x70. ++ gamma String representation of Gamma Curve(s). Driver ++ specific. Not supported by all drivers. ++ reset_pin GPIO pin for RESET ++ dc_pin GPIO pin for D/C ++ led_pin GPIO pin for LED backlight ++ ++ ++Name: fe-pi-audio ++Info: Configures the Fe-Pi Audio Sound Card ++Load: dtoverlay=fe-pi-audio ++Params: ++ ++ ++Name: fsm-demo ++Info: A demonstration of the gpio-fsm driver. The GPIOs are chosen to work ++ nicely with a "traffic-light" display of red, amber and green LEDs on ++ GPIOs 7, 8 and 25 respectively. ++Load: dtoverlay=fsm-demo,= ++Params: fsm_debug Enable debug logging (default off) ++ ++ ++Name: gc9a01 ++Info: Enables GalaxyCore's GC9A01 single chip driver based displays on ++ SPI0 as fb1, using GPIOs DC=25, RST=27 and BL=18 (physical ++ GPIO header pins 22, 13 and 12 respectively) in addition to the ++ SPI0 pins DIN=10, CLK=11 and CS=8 (physical GPIO header pins 19, ++ 23 and 24 respectively). ++Load: dtoverlay=gc9a01,= ++Params: speed Display SPI bus speed ++ ++ rotate Display rotation {0,90,180,270} ++ ++ width Width of the display ++ ++ height Height of the display ++ ++ fps Delay between frame updates ++ ++ debug Debug output level {0-7} ++ ++ ++Name: ghost-amp ++Info: An overlay for the Ghost amplifier. ++Load: dtoverlay=ghost-amp,= ++Params: fsm_debug Enable debug logging of the GPIO FSM (default ++ off) ++ ++ ++Name: goodix ++Info: Enables I2C connected Goodix gt9271 multiple touch controller using ++ GPIOs 4 and 17 (pins 7 and 11 on GPIO header) for interrupt and reset. ++Load: dtoverlay=goodix,= ++Params: interrupt GPIO used for interrupt (default 4) ++ reset GPIO used for reset (default 17) ++ ++ ++Name: googlevoicehat-soundcard ++Info: Configures the Google voiceHAT soundcard ++Load: dtoverlay=googlevoicehat-soundcard ++Params: ++ ++ ++Name: gpio-fan ++Info: Configure a GPIO pin to control a cooling fan. ++Load: dtoverlay=gpio-fan,= ++Params: gpiopin GPIO used to control the fan (default 12) ++ temp Temperature at which the fan switches on, in ++ millicelcius (default 55000) ++ hyst Temperature delta (in millicelcius) below ++ temp at which the fan will drop to minrpm ++ (default 10000) ++ ++ ++Name: gpio-hog ++Info: Activate a "hog" for a GPIO - request that the kernel configures it as ++ an output, driven low or high as indicated by the presence or absence ++ of the active_low parameter. Note that a hogged GPIO is not available ++ to other drivers or for gpioset/gpioget. ++Load: dtoverlay=gpio-hog,= ++Params: gpio GPIO pin to hog (default 26) ++ active_low If set, the hog drives the GPIO low (defaults ++ to off - the GPIO is driven high) ++ ++ ++Name: gpio-ir ++Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- ++ based gpio_ir_recv driver maps received keys directly to a ++ /dev/input/event* device, all decoding is done by the kernel - LIRC is ++ not required! The key mapping and other decoding parameters can be ++ configured by "ir-keytable" tool. ++Load: dtoverlay=gpio-ir,= ++Params: gpio_pin Input pin number. Default is 18. ++ ++ gpio_pull Desired pull-up/down state (off, down, up) ++ Default is "up". ++ ++ invert "1" = invert the input (active-low signalling). ++ "0" = non-inverted input (active-high ++ signalling). Default is "1". ++ ++ rc-map-name Default rc keymap (can also be changed by ++ ir-keytable), defaults to "rc-rc6-mce" ++ ++ ++Name: gpio-ir-tx ++Info: Use GPIO pin as bit-banged infrared transmitter output. ++ This is an alternative to "pwm-ir-tx". gpio-ir-tx doesn't require ++ a PWM so it can be used together with onboard analog audio. ++Load: dtoverlay=gpio-ir-tx,= ++Params: gpio_pin Output GPIO (default 18) ++ ++ invert "1" = invert the output (make it active-low). ++ Default is "0" (active-high). ++ ++ ++Name: gpio-key ++Info: This is a generic overlay for activating GPIO keypresses using ++ the gpio-keys library and this dtoverlay. Multiple keys can be ++ set up using multiple calls to the overlay for configuring ++ additional buttons or joysticks. You can see available keycodes ++ at https://github.com/torvalds/linux/blob/v4.12/include/uapi/ ++ linux/input-event-codes.h#L64 ++Load: dtoverlay=gpio-key,= ++Params: gpio GPIO pin to trigger on (default 3) ++ active_low When this is 1 (active low), a falling ++ edge generates a key down event and a ++ rising edge generates a key up event. ++ When this is 0 (active high), this is ++ reversed. The default is 1 (active low) ++ gpio_pull Desired pull-up/down state (off, down, up) ++ Default is "up". Note that the default pin ++ (GPIO3) has an external pullup ++ label Set a label for the key ++ keycode Set the key code for the button ++ ++ ++ ++Name: gpio-led ++Info: This is a generic overlay for activating LEDs (or any other component) ++ by a GPIO pin. Multiple LEDs can be set up using multiple calls to the ++ overlay. While there are many existing methods to activate LEDs on the ++ RPi, this method offers some advantages: ++ 1) Does not require any userspace programs. ++ 2) LEDs can be connected to the kernel's led-trigger framework, ++ and drive the LED based on triggers such as cpu load, heartbeat, ++ kernel panic, key input, timers and others. ++ 3) LED can be tied to the input state of another GPIO pin. ++ 4) The LED is setup early during the kernel boot process (useful ++ for cpu/heartbeat/panic triggers). ++ ++ Typical electrical connection is: ++ RPI-GPIO.19 -> LED -> 300ohm resister -> RPI-GND ++ The GPIO pin number can be changed with the 'gpio=' parameter. ++ ++ To control an LED from userspace, write a 0 or 1 value: ++ echo 1 > /sys/class/leds/myled1/brightness ++ The 'myled1' name can be changed with the 'label=' parameter. ++ ++ To connect the LED to a kernel trigger from userspace: ++ echo cpu > /sys/class/leds/myled1/trigger ++ echo heartbeat > /sys/class/leds/myled1/trigger ++ echo none > /sys/class/leds/myled1/trigger ++ To connect the LED to GPIO.26 pin (physical pin 37): ++ echo gpio > /sys/class/leds/myled1/trigger ++ echo 26 > /sys/class/leds/myled1/gpio ++ Available triggers: ++ cat /sys/class/leds/myled1/trigger ++ ++ More information about the Linux kernel LED/Trigger system: ++ https://www.kernel.org/doc/Documentation/leds/leds-class.rst ++ https://www.kernel.org/doc/Documentation/leds/ledtrig-oneshot.rst ++Load: dtoverlay=gpio-led,= ++Params: gpio GPIO pin connected to the LED (default 19) ++ label The label for this LED. It will appear under ++ /sys/class/leds/