From: Tianling Shen Date: Wed, 10 Jan 2024 09:12:46 +0000 (+0800) Subject: uboot-rockchip: Update to 2024.01 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7939df9587b9627f3032ad070e8b43afee8c840f;p=openwrt%2Fstaging%2Fjow.git uboot-rockchip: Update to 2024.01 Runtime tested on Orange Pi R1 Plus LTS and NanoPi R4S. Removed upstreamed patches: - 100-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus.patch - 101-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus-LT.patch - 103-rockchip-rk3568-Add-support-for-FriendlyARM-NanoPi-R.patch - 104-rockchip-rk3568-Add-support-for-FriendlyARM-NanoPi-R.patch Refreshed remaining patches. Signed-off-by: Tianling Shen --- diff --git a/package/boot/uboot-rockchip/Makefile b/package/boot/uboot-rockchip/Makefile index 1dad3c1e1c..71eac09d98 100644 --- a/package/boot/uboot-rockchip/Makefile +++ b/package/boot/uboot-rockchip/Makefile @@ -5,9 +5,9 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk -PKG_VERSION:=2023.07.02 +PKG_VERSION:=2024.01 PKG_RELEASE:=1 -PKG_HASH:=6b6a48581c14abb0f95bd87c1af4d740922406d7b801002a9f94727fdde021d5 +PKG_HASH:=b99611f1ed237bf3541bdc8434b68c96a6e05967061f992443cb30aabebef5b3 PKG_MAINTAINER:=Tobias Maedel diff --git a/package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus.patch b/package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus.patch deleted file mode 100644 index 487e6afda8..0000000000 --- a/package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus.patch +++ /dev/null @@ -1,594 +0,0 @@ -From 89afb631d965292aaf433806d8224b53d9e74036 Mon Sep 17 00:00:00 2001 -From: Tianling Shen -Date: Sat, 20 May 2023 18:50:38 +0800 -Subject: [PATCH] rockchip: rk3328: Add support for Orange Pi R1 Plus - -Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. - -This device is similar to the NanoPi R2S, and has a 16MB -SPI NOR (mx25l12805d). The reset button is changed to -directly reset the power supply, another detail is that -both network ports have independent MAC addresses. - -The device tree and description are taken from kernel v6.3-rc1. - -Reviewed-by: Kever Yang -Signed-off-by: Tianling Shen ---- - arch/arm/dts/Makefile | 1 + - .../dts/rk3328-orangepi-r1-plus-u-boot.dtsi | 46 +++ - arch/arm/dts/rk3328-orangepi-r1-plus.dts | 373 ++++++++++++++++++ - board/rockchip/evb_rk3328/MAINTAINERS | 6 + - configs/orangepi-r1-plus-rk3328_defconfig | 114 ++++++ - 5 files changed, 540 insertions(+) - create mode 100644 arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi - create mode 100644 arch/arm/dts/rk3328-orangepi-r1-plus.dts - create mode 100644 configs/orangepi-r1-plus-rk3328_defconfig - ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -125,6 +125,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3328) += \ - rk3328-evb.dtb \ - rk3328-nanopi-r2c.dtb \ - rk3328-nanopi-r2s.dtb \ -+ rk3328-orangepi-r1-plus.dtb \ - rk3328-roc-cc.dtb \ - rk3328-rock64.dtb \ - rk3328-rock-pi-e.dtb ---- /dev/null -+++ b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi -@@ -0,0 +1,46 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later -+/* -+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd -+ * (C) Copyright 2020 David Bauer -+ */ -+ -+#include "rk3328-u-boot.dtsi" -+#include "rk3328-sdram-ddr4-666.dtsi" -+/ { -+ chosen { -+ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc; -+ }; -+}; -+ -+&gpio0 { -+ bootph-pre-ram; -+}; -+ -+&pinctrl { -+ bootph-pre-ram; -+}; -+ -+&sdmmc0m1_pin { -+ bootph-pre-ram; -+}; -+ -+&pcfg_pull_up_4ma { -+ bootph-pre-ram; -+}; -+ -+/* Need this and all the pinctrl/gpio stuff above to set pinmux */ -+&vcc_sd { -+ bootph-pre-ram; -+}; -+ -+&gmac2io { -+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; -+ snps,reset-active-low; -+ snps,reset-delays-us = <0 10000 50000>; -+}; -+ -+&spi0 { -+ spi_flash: spiflash@0 { -+ bootph-all; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/dts/rk3328-orangepi-r1-plus.dts -@@ -0,0 +1,373 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Based on rk3328-nanopi-r2s.dts, which is: -+ * Copyright (c) 2020 David Bauer -+ */ -+ -+/dts-v1/; -+ -+#include -+#include -+#include "rk3328.dtsi" -+ -+/ { -+ model = "Xunlong Orange Pi R1 Plus"; -+ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; -+ -+ aliases { -+ ethernet1 = &rtl8153; -+ mmc0 = &sdmmc; -+ }; -+ -+ chosen { -+ stdout-path = "serial2:1500000n8"; -+ }; -+ -+ gmac_clk: gmac-clock { -+ compatible = "fixed-clock"; -+ clock-frequency = <125000000>; -+ clock-output-names = "gmac_clkin"; -+ #clock-cells = <0>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; -+ pinctrl-names = "default"; -+ -+ led-0 { -+ function = LED_FUNCTION_LAN; -+ color = ; -+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-1 { -+ function = LED_FUNCTION_STATUS; -+ color = ; -+ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led-2 { -+ function = LED_FUNCTION_WAN; -+ color = ; -+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ vcc_sd: sdmmc-regulator { -+ compatible = "regulator-fixed"; -+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; -+ pinctrl-0 = <&sdmmc0m1_pin>; -+ pinctrl-names = "default"; -+ regulator-name = "vcc_sd"; -+ regulator-boot-on; -+ vin-supply = <&vcc_io>; -+ }; -+ -+ vcc_sys: vcc-sys-regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc_sys"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ }; -+ -+ vdd_5v_lan: vdd-5v-lan-regulator { -+ compatible = "regulator-fixed"; -+ enable-active-high; -+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&lan_vdd_pin>; -+ pinctrl-names = "default"; -+ regulator-name = "vdd_5v_lan"; -+ regulator-always-on; -+ regulator-boot-on; -+ vin-supply = <&vcc_sys>; -+ }; -+}; -+ -+&cpu0 { -+ cpu-supply = <&vdd_arm>; -+}; -+ -+&cpu1 { -+ cpu-supply = <&vdd_arm>; -+}; -+ -+&cpu2 { -+ cpu-supply = <&vdd_arm>; -+}; -+ -+&cpu3 { -+ cpu-supply = <&vdd_arm>; -+}; -+ -+&display_subsystem { -+ status = "disabled"; -+}; -+ -+&gmac2io { -+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; -+ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; -+ clock_in_out = "input"; -+ phy-handle = <&rtl8211e>; -+ phy-mode = "rgmii"; -+ phy-supply = <&vcc_io>; -+ pinctrl-0 = <&rgmiim1_pins>; -+ pinctrl-names = "default"; -+ snps,aal; -+ rx_delay = <0x18>; -+ tx_delay = <0x24>; -+ status = "okay"; -+ -+ mdio { -+ compatible = "snps,dwmac-mdio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rtl8211e: ethernet-phy@1 { -+ reg = <1>; -+ pinctrl-0 = <ð_phy_reset_pin>; -+ pinctrl-names = "default"; -+ reset-assert-us = <10000>; -+ reset-deassert-us = <50000>; -+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&i2c1 { -+ status = "okay"; -+ -+ rk805: pmic@18 { -+ compatible = "rockchip,rk805"; -+ reg = <0x18>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>; -+ #clock-cells = <1>; -+ clock-output-names = "xin32k", "rk805-clkout2"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ pinctrl-0 = <&pmic_int_l>; -+ pinctrl-names = "default"; -+ rockchip,system-power-controller; -+ wakeup-source; -+ -+ vcc1-supply = <&vcc_sys>; -+ vcc2-supply = <&vcc_sys>; -+ vcc3-supply = <&vcc_sys>; -+ vcc4-supply = <&vcc_sys>; -+ vcc5-supply = <&vcc_io>; -+ vcc6-supply = <&vcc_sys>; -+ -+ regulators { -+ vdd_log: DCDC_REG1 { -+ regulator-name = "vdd_log"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <712500>; -+ regulator-max-microvolt = <1450000>; -+ regulator-ramp-delay = <12500>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1000000>; -+ }; -+ }; -+ -+ vdd_arm: DCDC_REG2 { -+ regulator-name = "vdd_arm"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <712500>; -+ regulator-max-microvolt = <1450000>; -+ regulator-ramp-delay = <12500>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <950000>; -+ }; -+ }; -+ -+ vcc_ddr: DCDC_REG3 { -+ regulator-name = "vcc_ddr"; -+ regulator-always-on; -+ regulator-boot-on; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ }; -+ }; -+ -+ vcc_io: DCDC_REG4 { -+ regulator-name = "vcc_io"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <3300000>; -+ }; -+ }; -+ -+ vcc_18: LDO_REG1 { -+ regulator-name = "vcc_18"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1800000>; -+ }; -+ }; -+ -+ vcc18_emmc: LDO_REG2 { -+ regulator-name = "vcc18_emmc"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1800000>; -+ }; -+ }; -+ -+ vdd_10: LDO_REG3 { -+ regulator-name = "vdd_10"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <1000000>; -+ regulator-max-microvolt = <1000000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1000000>; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&io_domains { -+ pmuio-supply = <&vcc_io>; -+ vccio1-supply = <&vcc_io>; -+ vccio2-supply = <&vcc18_emmc>; -+ vccio3-supply = <&vcc_io>; -+ vccio4-supply = <&vcc_io>; -+ vccio5-supply = <&vcc_io>; -+ vccio6-supply = <&vcc_io>; -+ status = "okay"; -+}; -+ -+&pinctrl { -+ gmac2io { -+ eth_phy_reset_pin: eth-phy-reset-pin { -+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; -+ }; -+ }; -+ -+ leds { -+ lan_led_pin: lan-led-pin { -+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ sys_led_pin: sys-led-pin { -+ rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ wan_led_pin: wan-led-pin { -+ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ }; -+ -+ lan { -+ lan_vdd_pin: lan-vdd-pin { -+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ }; -+ -+ pmic { -+ pmic_int_l: pmic-int-l { -+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; -+ }; -+ }; -+}; -+ -+&pwm2 { -+ status = "okay"; -+}; -+ -+&sdmmc { -+ bus-width = <4>; -+ cap-sd-highspeed; -+ disable-wp; -+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; -+ pinctrl-names = "default"; -+ vmmc-supply = <&vcc_sd>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ status = "okay"; -+ -+ flash@0 { -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <50000000>; -+ }; -+}; -+ -+&tsadc { -+ rockchip,hw-tshut-mode = <0>; -+ rockchip,hw-tshut-polarity = <0>; -+ status = "okay"; -+}; -+ -+&u2phy { -+ status = "okay"; -+}; -+ -+&u2phy_host { -+ status = "okay"; -+}; -+ -+&u2phy_otg { -+ status = "okay"; -+}; -+ -+&uart2 { -+ status = "okay"; -+}; -+ -+&usb20_otg { -+ dr_mode = "host"; -+ status = "okay"; -+}; -+ -+&usbdrd3 { -+ dr_mode = "host"; -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ /* Second port is for USB 3.0 */ -+ rtl8153: device@2 { -+ compatible = "usbbda,8153"; -+ reg = <2>; -+ }; -+}; -+ -+&usb_host0_ehci { -+ status = "okay"; -+}; -+ -+&usb_host0_ohci { -+ status = "okay"; -+}; ---- a/board/rockchip/evb_rk3328/MAINTAINERS -+++ b/board/rockchip/evb_rk3328/MAINTAINERS -@@ -18,6 +18,12 @@ F: configs/nanopi-r2s-rk3328_defcon - F: arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi - F: arch/arm/dts/rk3328-nanopi-r2s.dts - -+ORANGEPI-R1-PLUS-RK3328 -+M: Tianling Shen -+S: Maintained -+F: configs/orangepi-r1-plus-rk3328_defconfig -+F: arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi -+ - ROC-RK3328-CC - M: Loic Devulder - M: Chen-Yu Tsai ---- /dev/null -+++ b/configs/orangepi-r1-plus-rk3328_defconfig -@@ -0,0 +1,114 @@ -+CONFIG_ARM=y -+CONFIG_SKIP_LOWLEVEL_INIT=y -+CONFIG_COUNTER_FREQUENCY=24000000 -+CONFIG_ARCH_ROCKCHIP=y -+CONFIG_TEXT_BASE=0x00200000 -+CONFIG_SPL_GPIO=y -+CONFIG_NR_DRAM_BANKS=1 -+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 -+CONFIG_ENV_OFFSET=0x3F8000 -+CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus" -+CONFIG_DM_RESET=y -+CONFIG_ROCKCHIP_RK3328=y -+CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y -+CONFIG_TPL_LIBCOMMON_SUPPORT=y -+CONFIG_TPL_LIBGENERIC_SUPPORT=y -+CONFIG_SPL_DRIVERS_MISC=y -+CONFIG_SPL_STACK_R_ADDR=0x600000 -+CONFIG_SPL_STACK=0x400000 -+CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 -+CONFIG_DEBUG_UART_BASE=0xFF130000 -+CONFIG_DEBUG_UART_CLOCK=24000000 -+CONFIG_SYS_LOAD_ADDR=0x800800 -+CONFIG_DEBUG_UART=y -+# CONFIG_ANDROID_BOOT_IMAGE is not set -+CONFIG_FIT=y -+CONFIG_FIT_VERBOSE=y -+CONFIG_SPL_LOAD_FIT=y -+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-orangepi-r1-plus.dtb" -+# CONFIG_DISPLAY_CPUINFO is not set -+CONFIG_DISPLAY_BOARDINFO_LATE=y -+CONFIG_MISC_INIT_R=y -+CONFIG_SPL_MAX_SIZE=0x40000 -+CONFIG_SPL_PAD_TO=0x7f8000 -+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -+CONFIG_SPL_BSS_START_ADDR=0x2000000 -+CONFIG_SPL_BSS_MAX_SIZE=0x2000 -+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -+CONFIG_SPL_STACK_R=y -+CONFIG_SPL_I2C=y -+CONFIG_SPL_POWER=y -+CONFIG_SPL_ATF=y -+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y -+CONFIG_TPL_SYS_MALLOC_SIMPLE=y -+CONFIG_CMD_BOOTZ=y -+CONFIG_CMD_GPT=y -+CONFIG_CMD_MMC=y -+CONFIG_CMD_USB=y -+# CONFIG_CMD_SETEXPR is not set -+CONFIG_CMD_TIME=y -+CONFIG_SPL_OF_CONTROL=y -+CONFIG_TPL_OF_CONTROL=y -+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" -+CONFIG_TPL_OF_PLATDATA=y -+CONFIG_ENV_IS_IN_MMC=y -+CONFIG_SYS_RELOC_GD_ENV_ADDR=y -+CONFIG_SYS_MMC_ENV_DEV=1 -+CONFIG_NET_RANDOM_ETHADDR=y -+CONFIG_TPL_DM=y -+CONFIG_REGMAP=y -+CONFIG_SPL_REGMAP=y -+CONFIG_TPL_REGMAP=y -+CONFIG_SYSCON=y -+CONFIG_SPL_SYSCON=y -+CONFIG_TPL_SYSCON=y -+CONFIG_CLK=y -+CONFIG_SPL_CLK=y -+CONFIG_FASTBOOT_BUF_ADDR=0x800800 -+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -+CONFIG_ROCKCHIP_GPIO=y -+CONFIG_SYS_I2C_ROCKCHIP=y -+CONFIG_MMC_DW=y -+CONFIG_MMC_DW_ROCKCHIP=y -+CONFIG_SF_DEFAULT_SPEED=20000000 -+CONFIG_SPI_FLASH_GIGADEVICE=y -+CONFIG_ETH_DESIGNWARE=y -+CONFIG_GMAC_ROCKCHIP=y -+CONFIG_PINCTRL=y -+CONFIG_SPL_PINCTRL=y -+CONFIG_DM_PMIC=y -+CONFIG_PMIC_RK8XX=y -+CONFIG_SPL_PMIC_RK8XX=y -+CONFIG_SPL_DM_REGULATOR=y -+CONFIG_REGULATOR_PWM=y -+CONFIG_DM_REGULATOR_FIXED=y -+CONFIG_SPL_DM_REGULATOR_FIXED=y -+CONFIG_REGULATOR_RK8XX=y -+CONFIG_PWM_ROCKCHIP=y -+CONFIG_RAM=y -+CONFIG_SPL_RAM=y -+CONFIG_TPL_RAM=y -+CONFIG_BAUDRATE=1500000 -+CONFIG_DEBUG_UART_SHIFT=2 -+CONFIG_SYS_NS16550_MEM32=y -+CONFIG_ROCKCHIP_SPI=y -+CONFIG_SYSINFO=y -+CONFIG_SYSRESET=y -+# CONFIG_TPL_SYSRESET is not set -+CONFIG_USB=y -+CONFIG_USB_XHCI_HCD=y -+CONFIG_USB_XHCI_DWC3=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_USB_EHCI_GENERIC=y -+CONFIG_USB_OHCI_HCD=y -+CONFIG_USB_OHCI_GENERIC=y -+CONFIG_USB_DWC2=y -+CONFIG_USB_DWC3=y -+# CONFIG_USB_DWC3_GADGET is not set -+CONFIG_USB_GADGET=y -+CONFIG_USB_GADGET_DWC2_OTG=y -+CONFIG_SPL_TINY_MEMSET=y -+CONFIG_TPL_TINY_MEMSET=y -+CONFIG_ERRNO_STR=y diff --git a/package/boot/uboot-rockchip/patches/101-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus-LT.patch b/package/boot/uboot-rockchip/patches/101-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus-LT.patch deleted file mode 100644 index 56d36c74dc..0000000000 --- a/package/boot/uboot-rockchip/patches/101-rockchip-rk3328-Add-support-for-Orange-Pi-R1-Plus-LT.patch +++ /dev/null @@ -1,257 +0,0 @@ -From 408fd4570c0f1e6b1fe3722998394651144f2a29 Mon Sep 17 00:00:00 2001 -From: Tianling Shen -Date: Sat, 20 May 2023 18:52:14 +0800 -Subject: [PATCH] rockchip: rk3328: Add support for Orange Pi R1 Plus LTS - -The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with -the on-board NIC chip changed from rtl8211e to yt8531c, and RAM type -changed from DDR4 to LPDDR3. - -The device tree is taken from kernel v6.4-rc1. - -Signed-off-by: Tianling Shen ---- - arch/arm/dts/Makefile | 1 + - .../rk3328-orangepi-r1-plus-lts-u-boot.dtsi | 46 +++++++ - arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts | 40 ++++++ - board/rockchip/evb_rk3328/MAINTAINERS | 6 + - configs/orangepi-r1-plus-lts-rk3328_defconfig | 114 ++++++++++++++++++ - 5 files changed, 207 insertions(+) - create mode 100644 arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi - create mode 100644 arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts - create mode 100644 configs/orangepi-r1-plus-lts-rk3328_defconfig - ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -126,6 +126,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3328) += \ - rk3328-nanopi-r2c.dtb \ - rk3328-nanopi-r2s.dtb \ - rk3328-orangepi-r1-plus.dtb \ -+ rk3328-orangepi-r1-plus-lts.dtb \ - rk3328-roc-cc.dtb \ - rk3328-rock64.dtb \ - rk3328-rock-pi-e.dtb ---- /dev/null -+++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi -@@ -0,0 +1,46 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later -+/* -+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd -+ * (C) Copyright 2020 David Bauer -+ */ -+ -+#include "rk3328-u-boot.dtsi" -+#include "rk3328-sdram-lpddr3-666.dtsi" -+/ { -+ chosen { -+ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc; -+ }; -+}; -+ -+&gpio0 { -+ bootph-pre-ram; -+}; -+ -+&pinctrl { -+ bootph-pre-ram; -+}; -+ -+&sdmmc0m1_pin { -+ bootph-pre-ram; -+}; -+ -+&pcfg_pull_up_4ma { -+ bootph-pre-ram; -+}; -+ -+/* Need this and all the pinctrl/gpio stuff above to set pinmux */ -+&vcc_sd { -+ bootph-pre-ram; -+}; -+ -+&gmac2io { -+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; -+ snps,reset-active-low; -+ snps,reset-delays-us = <0 10000 50000>; -+}; -+ -+&spi0 { -+ spi_flash: spiflash@0 { -+ bootph-all; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts -@@ -0,0 +1,40 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright (c) 2016 Xunlong Software. Co., Ltd. -+ * (http://www.orangepi.org) -+ * -+ * Copyright (c) 2021-2023 Tianling Shen -+ */ -+ -+/dts-v1/; -+#include "rk3328-orangepi-r1-plus.dts" -+ -+/ { -+ model = "Xunlong Orange Pi R1 Plus LTS"; -+ compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328"; -+}; -+ -+&gmac2io { -+ phy-handle = <&yt8531c>; -+ tx_delay = <0x19>; -+ rx_delay = <0x05>; -+ -+ mdio { -+ /delete-node/ ethernet-phy@1; -+ -+ yt8531c: ethernet-phy@0 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <0>; -+ -+ motorcomm,clk-out-frequency-hz = <125000000>; -+ motorcomm,keep-pll-enabled; -+ motorcomm,auto-sleep-disabled; -+ -+ pinctrl-0 = <ð_phy_reset_pin>; -+ pinctrl-names = "default"; -+ reset-assert-us = <15000>; -+ reset-deassert-us = <50000>; -+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; ---- a/board/rockchip/evb_rk3328/MAINTAINERS -+++ b/board/rockchip/evb_rk3328/MAINTAINERS -@@ -24,6 +24,12 @@ S: Maintained - F: configs/orangepi-r1-plus-rk3328_defconfig - F: arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi - -+ORANGEPI-R1-PLUS-LTS-RK3328 -+M: Tianling Shen -+S: Maintained -+F: configs/orangepi-r1-plus-lts-rk3328_defconfig -+F: arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi -+ - ROC-RK3328-CC - M: Loic Devulder - M: Chen-Yu Tsai ---- /dev/null -+++ b/configs/orangepi-r1-plus-lts-rk3328_defconfig -@@ -0,0 +1,114 @@ -+CONFIG_ARM=y -+CONFIG_SKIP_LOWLEVEL_INIT=y -+CONFIG_COUNTER_FREQUENCY=24000000 -+CONFIG_ARCH_ROCKCHIP=y -+CONFIG_TEXT_BASE=0x00200000 -+CONFIG_SPL_GPIO=y -+CONFIG_NR_DRAM_BANKS=1 -+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 -+CONFIG_ENV_OFFSET=0x3F8000 -+CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus-lts" -+CONFIG_DM_RESET=y -+CONFIG_ROCKCHIP_RK3328=y -+CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y -+CONFIG_TPL_LIBCOMMON_SUPPORT=y -+CONFIG_TPL_LIBGENERIC_SUPPORT=y -+CONFIG_SPL_DRIVERS_MISC=y -+CONFIG_SPL_STACK_R_ADDR=0x600000 -+CONFIG_SPL_STACK=0x400000 -+CONFIG_TPL_SYS_MALLOC_F_LEN=0x800 -+CONFIG_DEBUG_UART_BASE=0xFF130000 -+CONFIG_DEBUG_UART_CLOCK=24000000 -+CONFIG_SYS_LOAD_ADDR=0x800800 -+CONFIG_DEBUG_UART=y -+# CONFIG_ANDROID_BOOT_IMAGE is not set -+CONFIG_FIT=y -+CONFIG_FIT_VERBOSE=y -+CONFIG_SPL_LOAD_FIT=y -+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-orangepi-r1-plus-lts.dtb" -+# CONFIG_DISPLAY_CPUINFO is not set -+CONFIG_DISPLAY_BOARDINFO_LATE=y -+CONFIG_MISC_INIT_R=y -+CONFIG_SPL_MAX_SIZE=0x40000 -+CONFIG_SPL_PAD_TO=0x7f8000 -+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -+CONFIG_SPL_BSS_START_ADDR=0x2000000 -+CONFIG_SPL_BSS_MAX_SIZE=0x2000 -+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -+CONFIG_SPL_STACK_R=y -+CONFIG_SPL_I2C=y -+CONFIG_SPL_POWER=y -+CONFIG_SPL_ATF=y -+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y -+CONFIG_TPL_SYS_MALLOC_SIMPLE=y -+CONFIG_CMD_BOOTZ=y -+CONFIG_CMD_GPT=y -+CONFIG_CMD_MMC=y -+CONFIG_CMD_USB=y -+# CONFIG_CMD_SETEXPR is not set -+CONFIG_CMD_TIME=y -+CONFIG_SPL_OF_CONTROL=y -+CONFIG_TPL_OF_CONTROL=y -+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" -+CONFIG_TPL_OF_PLATDATA=y -+CONFIG_ENV_IS_IN_MMC=y -+CONFIG_SYS_RELOC_GD_ENV_ADDR=y -+CONFIG_SYS_MMC_ENV_DEV=1 -+CONFIG_NET_RANDOM_ETHADDR=y -+CONFIG_TPL_DM=y -+CONFIG_REGMAP=y -+CONFIG_SPL_REGMAP=y -+CONFIG_TPL_REGMAP=y -+CONFIG_SYSCON=y -+CONFIG_SPL_SYSCON=y -+CONFIG_TPL_SYSCON=y -+CONFIG_CLK=y -+CONFIG_SPL_CLK=y -+CONFIG_FASTBOOT_BUF_ADDR=0x800800 -+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y -+CONFIG_ROCKCHIP_GPIO=y -+CONFIG_SYS_I2C_ROCKCHIP=y -+CONFIG_MMC_DW=y -+CONFIG_MMC_DW_ROCKCHIP=y -+CONFIG_SF_DEFAULT_SPEED=20000000 -+CONFIG_SPI_FLASH_GIGADEVICE=y -+CONFIG_ETH_DESIGNWARE=y -+CONFIG_GMAC_ROCKCHIP=y -+CONFIG_PINCTRL=y -+CONFIG_SPL_PINCTRL=y -+CONFIG_DM_PMIC=y -+CONFIG_PMIC_RK8XX=y -+CONFIG_SPL_PMIC_RK8XX=y -+CONFIG_SPL_DM_REGULATOR=y -+CONFIG_REGULATOR_PWM=y -+CONFIG_DM_REGULATOR_FIXED=y -+CONFIG_SPL_DM_REGULATOR_FIXED=y -+CONFIG_REGULATOR_RK8XX=y -+CONFIG_PWM_ROCKCHIP=y -+CONFIG_RAM=y -+CONFIG_SPL_RAM=y -+CONFIG_TPL_RAM=y -+CONFIG_BAUDRATE=1500000 -+CONFIG_DEBUG_UART_SHIFT=2 -+CONFIG_SYS_NS16550_MEM32=y -+CONFIG_ROCKCHIP_SPI=y -+CONFIG_SYSINFO=y -+CONFIG_SYSRESET=y -+# CONFIG_TPL_SYSRESET is not set -+CONFIG_USB=y -+CONFIG_USB_XHCI_HCD=y -+CONFIG_USB_XHCI_DWC3=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_USB_EHCI_GENERIC=y -+CONFIG_USB_OHCI_HCD=y -+CONFIG_USB_OHCI_GENERIC=y -+CONFIG_USB_DWC2=y -+CONFIG_USB_DWC3=y -+# CONFIG_USB_DWC3_GADGET is not set -+CONFIG_USB_GADGET=y -+CONFIG_USB_GADGET_DWC2_OTG=y -+CONFIG_SPL_TINY_MEMSET=y -+CONFIG_TPL_TINY_MEMSET=y -+CONFIG_ERRNO_STR=y diff --git a/package/boot/uboot-rockchip/patches/103-rockchip-rk3568-Add-support-for-FriendlyARM-NanoPi-R.patch b/package/boot/uboot-rockchip/patches/103-rockchip-rk3568-Add-support-for-FriendlyARM-NanoPi-R.patch deleted file mode 100644 index 09cafb3227..0000000000 --- a/package/boot/uboot-rockchip/patches/103-rockchip-rk3568-Add-support-for-FriendlyARM-NanoPi-R.patch +++ /dev/null @@ -1,917 +0,0 @@ -From c84214aab0e4c5b2f619dd89655f27b3ae40e82b Mon Sep 17 00:00:00 2001 -From: Tianling Shen -Date: Tue, 30 May 2023 15:00:33 +0800 -Subject: [PATCH] rockchip: rk3568: Add support for FriendlyARM NanoPi R5S - -FriendlyARM NanoPi R5S is an open-sourced mini IoT gateway device. - -Board Specifications -- Rockchip RK3568 -- 2 or 4GB LPDDR4X -- 8GB or 16GB eMMC, SD card slot -- GbE LAN (Native) -- 2x 2.5G LAN (PCIe) -- M.2 Connector -- HDMI 2.0, MIPI DSI/CSI -- 2xUSB 3.0 Host -- USB Type C PD, 5V/9V/12V -- GPIO: 12-pin 0.5mm FPC connector - -The device tree is taken from kernel v6.4-rc1. - -Reviewed-by: Kever Yang -Signed-off-by: Tianling Shen ---- - arch/arm/dts/Makefile | 1 + - arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi | 31 ++ - arch/arm/dts/rk3568-nanopi-r5s.dts | 136 +++++ - arch/arm/dts/rk3568-nanopi-r5s.dtsi | 590 +++++++++++++++++++++ - board/rockchip/evb_rk3568/MAINTAINERS | 8 + - configs/nanopi-r5s-rk3568_defconfig | 85 +++ - 6 files changed, 851 insertions(+) - create mode 100644 arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi - create mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dts - create mode 100644 arch/arm/dts/rk3568-nanopi-r5s.dtsi - create mode 100644 configs/nanopi-r5s-rk3568_defconfig - ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -171,6 +171,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \ - rk3566-anbernic-rgxx3.dtb \ - rk3566-radxa-cm3-io.dtb \ - rk3568-evb.dtb \ -+ rk3568-nanopi-r5s.dtb \ - rk3568-rock-3a.dtb - - dtb-$(CONFIG_ROCKCHIP_RK3588) += \ ---- /dev/null -+++ b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi -@@ -0,0 +1,31 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. -+ * (http://www.friendlyelec.com) -+ * -+ * Copyright (c) 2023 Tianling Shen -+ */ -+ -+#include "rk356x-u-boot.dtsi" -+ -+/ { -+ chosen { -+ stdout-path = &uart2; -+ u-boot,spl-boot-order = "same-as-spl", &sdmmc0, &sdhci; -+ }; -+}; -+ -+&sdhci { -+ cap-mmc-highspeed; -+ mmc-ddr-1_8v; -+ mmc-hs200-1_8v; -+ mmc-hs400-1_8v; -+ mmc-hs400-enhanced-strobe; -+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; -+}; -+ -+&uart2 { -+ clock-frequency = <24000000>; -+ bootph-all; -+ status = "okay"; -+}; ---- /dev/null -+++ b/arch/arm/dts/rk3568-nanopi-r5s.dts -@@ -0,0 +1,136 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. -+ * (http://www.friendlyelec.com) -+ * -+ * Copyright (c) 2023 Tianling Shen -+ */ -+ -+/dts-v1/; -+#include "rk3568-nanopi-r5s.dtsi" -+ -+/ { -+ model = "FriendlyElec NanoPi R5S"; -+ compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568"; -+ -+ aliases { -+ ethernet0 = &gmac0; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>; -+ -+ led-lan1 { -+ color = ; -+ function = LED_FUNCTION_LAN; -+ function-enumerator = <1>; -+ gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-lan2 { -+ color = ; -+ function = LED_FUNCTION_LAN; -+ function-enumerator = <2>; -+ gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power_led: led-power { -+ color = ; -+ function = LED_FUNCTION_POWER; -+ linux,default-trigger = "heartbeat"; -+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-wan { -+ color = ; -+ function = LED_FUNCTION_WAN; -+ gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&gmac0 { -+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; -+ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; -+ assigned-clock-rates = <0>, <125000000>; -+ clock_in_out = "output"; -+ phy-handle = <&rgmii_phy0>; -+ phy-mode = "rgmii"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac0_miim -+ &gmac0_tx_bus2 -+ &gmac0_rx_bus2 -+ &gmac0_rgmii_clk -+ &gmac0_rgmii_bus>; -+ snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; -+ snps,reset-active-low; -+ /* Reset time is 15ms, 50ms for rtl8211f */ -+ snps,reset-delays-us = <0 15000 50000>; -+ tx_delay = <0x3c>; -+ rx_delay = <0x2f>; -+ status = "okay"; -+}; -+ -+&mdio0 { -+ rgmii_phy0: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ pinctrl-0 = <ð_phy0_reset_pin>; -+ pinctrl-names = "default"; -+ }; -+}; -+ -+&pcie2x1 { -+ num-lanes = <1>; -+ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+}; -+ -+&pcie30phy { -+ data-lanes = <1 2>; -+ status = "okay"; -+}; -+ -+&pcie3x1 { -+ num-lanes = <1>; -+ reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; -+ vpcie3v3-supply = <&vcc3v3_pcie>; -+ status = "okay"; -+}; -+ -+&pcie3x2 { -+ num-lanes = <1>; -+ num-ib-windows = <8>; -+ num-ob-windows = <8>; -+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; -+ vpcie3v3-supply = <&vcc3v3_pcie>; -+ status = "okay"; -+}; -+ -+&pinctrl { -+ gmac0 { -+ eth_phy0_reset_pin: eth-phy0-reset-pin { -+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; -+ }; -+ }; -+ -+ gpio-leds { -+ lan1_led_pin: lan1-led-pin { -+ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ lan2_led_pin: lan2-led-pin { -+ rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ power_led_pin: power-led-pin { -+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ wan_led_pin: wan-led-pin { -+ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/dts/rk3568-nanopi-r5s.dtsi -@@ -0,0 +1,590 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. -+ * (http://www.friendlyelec.com) -+ * -+ * Copyright (c) 2023 Tianling Shen -+ */ -+ -+/dts-v1/; -+#include -+#include -+#include -+#include -+#include -+#include "rk3568.dtsi" -+ -+/ { -+ aliases { -+ mmc0 = &sdmmc0; -+ mmc1 = &sdhci; -+ }; -+ -+ chosen: chosen { -+ stdout-path = "serial2:1500000n8"; -+ }; -+ -+ hdmi-con { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi_con_in: endpoint { -+ remote-endpoint = <&hdmi_out_con>; -+ }; -+ }; -+ }; -+ -+ vdd_usbc: vdd-usbc-regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "vdd_usbc"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ }; -+ -+ vcc3v3_sys: vcc3v3-sys-regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc3v3_sys"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ vin-supply = <&vdd_usbc>; -+ }; -+ -+ vcc5v0_sys: vcc5v0-sys-regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc5v0_sys"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ vin-supply = <&vdd_usbc>; -+ }; -+ -+ vcc3v3_pcie: vcc3v3-pcie-regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc3v3_pcie"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ enable-active-high; -+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; -+ startup-delay-us = <200000>; -+ vin-supply = <&vcc5v0_sys>; -+ }; -+ -+ vcc5v0_usb: vcc5v0-usb-regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc5v0_usb"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ vin-supply = <&vdd_usbc>; -+ }; -+ -+ vcc5v0_usb_host: vcc5v0-usb-host-regulator { -+ compatible = "regulator-fixed"; -+ enable-active-high; -+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&vcc5v0_usb_host_en>; -+ regulator-name = "vcc5v0_usb_host"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ vin-supply = <&vcc5v0_usb>; -+ }; -+ -+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { -+ compatible = "regulator-fixed"; -+ enable-active-high; -+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&vcc5v0_usb_otg_en>; -+ regulator-name = "vcc5v0_usb_otg"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ vin-supply = <&vcc5v0_usb>; -+ }; -+ -+ pcie30_avdd0v9: pcie30-avdd0v9-regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "pcie30_avdd0v9"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <900000>; -+ regulator-max-microvolt = <900000>; -+ vin-supply = <&vcc3v3_sys>; -+ }; -+ -+ pcie30_avdd1v8: pcie30-avdd1v8-regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "pcie30_avdd1v8"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ vin-supply = <&vcc3v3_sys>; -+ }; -+}; -+ -+&combphy0 { -+ status = "okay"; -+}; -+ -+&combphy1 { -+ status = "okay"; -+}; -+ -+&combphy2 { -+ status = "okay"; -+}; -+ -+&cpu0 { -+ cpu-supply = <&vdd_cpu>; -+}; -+ -+&cpu1 { -+ cpu-supply = <&vdd_cpu>; -+}; -+ -+&cpu2 { -+ cpu-supply = <&vdd_cpu>; -+}; -+ -+&cpu3 { -+ cpu-supply = <&vdd_cpu>; -+}; -+ -+&gpu { -+ mali-supply = <&vdd_gpu>; -+ status = "okay"; -+}; -+ -+&hdmi { -+ avdd-0v9-supply = <&vdda0v9_image>; -+ avdd-1v8-supply = <&vcca1v8_image>; -+ status = "okay"; -+}; -+ -+&hdmi_in { -+ hdmi_in_vp0: endpoint { -+ remote-endpoint = <&vp0_out_hdmi>; -+ }; -+}; -+ -+&hdmi_out { -+ hdmi_out_con: endpoint { -+ remote-endpoint = <&hdmi_con_in>; -+ }; -+}; -+ -+&hdmi_sound { -+ status = "okay"; -+}; -+ -+&i2c0 { -+ status = "okay"; -+ -+ vdd_cpu: regulator@1c { -+ compatible = "tcs,tcs4525"; -+ reg = <0x1c>; -+ fcs,suspend-voltage-selector = <1>; -+ regulator-name = "vdd_cpu"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <800000>; -+ regulator-max-microvolt = <1150000>; -+ regulator-ramp-delay = <2300>; -+ vin-supply = <&vcc5v0_sys>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ rk809: pmic@20 { -+ compatible = "rockchip,rk809"; -+ reg = <0x20>; -+ interrupt-parent = <&gpio0>; -+ interrupts = ; -+ #clock-cells = <1>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pmic_int>; -+ rockchip,system-power-controller; -+ vcc1-supply = <&vcc3v3_sys>; -+ vcc2-supply = <&vcc3v3_sys>; -+ vcc3-supply = <&vcc3v3_sys>; -+ vcc4-supply = <&vcc3v3_sys>; -+ vcc5-supply = <&vcc3v3_sys>; -+ vcc6-supply = <&vcc3v3_sys>; -+ vcc7-supply = <&vcc3v3_sys>; -+ vcc8-supply = <&vcc3v3_sys>; -+ vcc9-supply = <&vcc3v3_sys>; -+ wakeup-source; -+ -+ regulators { -+ vdd_logic: DCDC_REG1 { -+ regulator-name = "vdd_logic"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-init-microvolt = <900000>; -+ regulator-initial-mode = <0x2>; -+ regulator-min-microvolt = <500000>; -+ regulator-max-microvolt = <1350000>; -+ regulator-ramp-delay = <6001>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vdd_gpu: DCDC_REG2 { -+ regulator-name = "vdd_gpu"; -+ regulator-always-on; -+ regulator-init-microvolt = <900000>; -+ regulator-initial-mode = <0x2>; -+ regulator-min-microvolt = <500000>; -+ regulator-max-microvolt = <1350000>; -+ regulator-ramp-delay = <6001>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vcc_ddr: DCDC_REG3 { -+ regulator-name = "vcc_ddr"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-initial-mode = <0x2>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ }; -+ }; -+ -+ vdd_npu: DCDC_REG4 { -+ regulator-name = "vdd_npu"; -+ regulator-init-microvolt = <900000>; -+ regulator-initial-mode = <0x2>; -+ regulator-min-microvolt = <500000>; -+ regulator-max-microvolt = <1350000>; -+ regulator-ramp-delay = <6001>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vcc_1v8: DCDC_REG5 { -+ regulator-name = "vcc_1v8"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vdda0v9_image: LDO_REG1 { -+ regulator-name = "vdda0v9_image"; -+ regulator-min-microvolt = <950000>; -+ regulator-max-microvolt = <950000>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vdda_0v9: LDO_REG2 { -+ regulator-name = "vdda_0v9"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <900000>; -+ regulator-max-microvolt = <900000>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vdda0v9_pmu: LDO_REG3 { -+ regulator-name = "vdda0v9_pmu"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <900000>; -+ regulator-max-microvolt = <900000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <900000>; -+ }; -+ }; -+ -+ vccio_acodec: LDO_REG4 { -+ regulator-name = "vccio_acodec"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vccio_sd: LDO_REG5 { -+ regulator-name = "vccio_sd"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vcc3v3_pmu: LDO_REG6 { -+ regulator-name = "vcc3v3_pmu"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <3300000>; -+ }; -+ }; -+ -+ vcca_1v8: LDO_REG7 { -+ regulator-name = "vcca_1v8"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vcca1v8_pmu: LDO_REG8 { -+ regulator-name = "vcca1v8_pmu"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1800000>; -+ }; -+ }; -+ -+ vcca1v8_image: LDO_REG9 { -+ regulator-name = "vcca1v8_image"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vcc_3v3: SWITCH_REG1 { -+ regulator-name = "vcc_3v3"; -+ regulator-always-on; -+ regulator-boot-on; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ -+ vcc3v3_sd: SWITCH_REG2 { -+ regulator-name = "vcc3v3_sd"; -+ regulator-always-on; -+ regulator-boot-on; -+ -+ regulator-state-mem { -+ regulator-off-in-suspend; -+ }; -+ }; -+ }; -+ -+ }; -+}; -+ -+&i2c5 { -+ status = "okay"; -+ -+ hym8563: rtc@51 { -+ compatible = "haoyu,hym8563"; -+ reg = <0x51>; -+ interrupt-parent = <&gpio0>; -+ interrupts = ; -+ #clock-cells = <0>; -+ clock-output-names = "rtcic_32kout"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&hym8563_int>; -+ wakeup-source; -+ }; -+}; -+ -+&i2s0_8ch { -+ status = "okay"; -+}; -+ -+&pcie30phy { -+ data-lanes = <1 2>; -+ status = "okay"; -+}; -+ -+&pinctrl { -+ hym8563 { -+ hym8563_int: hym8563-int { -+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; -+ }; -+ }; -+ -+ pmic { -+ pmic_int: pmic-int { -+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; -+ }; -+ }; -+ -+ usb { -+ vcc5v0_usb_host_en: vcc5v0-usb-host-en { -+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en { -+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ }; -+}; -+ -+&pmu_io_domains { -+ pmuio1-supply = <&vcc3v3_pmu>; -+ pmuio2-supply = <&vcc3v3_pmu>; -+ vccio1-supply = <&vccio_acodec>; -+ vccio3-supply = <&vccio_sd>; -+ vccio4-supply = <&vcc_1v8>; -+ vccio5-supply = <&vcc_3v3>; -+ vccio6-supply = <&vcc_1v8>; -+ vccio7-supply = <&vcc_3v3>; -+ status = "okay"; -+}; -+ -+&saradc { -+ vref-supply = <&vcca_1v8>; -+ status = "okay"; -+}; -+ -+&sdhci { -+ bus-width = <8>; -+ max-frequency = <200000000>; -+ non-removable; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; -+ status = "okay"; -+}; -+ -+&sdmmc0 { -+ max-frequency = <150000000>; -+ no-sdio; -+ no-mmc; -+ bus-width = <4>; -+ cap-mmc-highspeed; -+ cap-sd-highspeed; -+ disable-wp; -+ vmmc-supply = <&vcc3v3_sd>; -+ vqmmc-supply = <&vccio_sd>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; -+ status = "okay"; -+}; -+ -+&tsadc { -+ rockchip,hw-tshut-mode = <1>; -+ rockchip,hw-tshut-polarity = <0>; -+ status = "okay"; -+}; -+ -+&uart2 { -+ status = "okay"; -+}; -+ -+&usb_host0_ehci { -+ status = "okay"; -+}; -+ -+&usb_host0_ohci { -+ status = "okay"; -+}; -+ -+&usb_host0_xhci { -+ extcon = <&usb2phy0>; -+ dr_mode = "host"; -+ status = "okay"; -+}; -+ -+&usb_host1_ehci { -+ status = "okay"; -+}; -+ -+&usb_host1_ohci { -+ status = "okay"; -+}; -+ -+&usb_host1_xhci { -+ status = "okay"; -+}; -+ -+&usb2phy0 { -+ status = "okay"; -+}; -+ -+&usb2phy0_host { -+ phy-supply = <&vcc5v0_usb_host>; -+ status = "okay"; -+}; -+ -+&usb2phy0_otg { -+ status = "okay"; -+}; -+ -+&usb2phy1 { -+ status = "okay"; -+}; -+ -+&usb2phy1_host { -+ phy-supply = <&vcc5v0_usb_otg>; -+ status = "okay"; -+}; -+ -+&usb2phy1_otg { -+ status = "okay"; -+}; -+ -+&vop { -+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; -+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; -+ status = "okay"; -+}; -+ -+&vop_mmu { -+ status = "okay"; -+}; -+ -+&vp0 { -+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { -+ reg = ; -+ remote-endpoint = <&hdmi_in_vp0>; -+ }; -+}; ---- a/board/rockchip/evb_rk3568/MAINTAINERS -+++ b/board/rockchip/evb_rk3568/MAINTAINERS -@@ -7,6 +7,14 @@ F: configs/evb-rk3568_defconfig - F: arch/arm/dts/rk3568-evb-boot.dtsi - F: arch/arm/dts/rk3568-evb.dts - -+NANOPI-R5S -+M: Tianling Shen -+S: Maintained -+F: configs/nanopi-r5s-rk3568_defconfig -+F: arch/arm/dts/rk3568-nanopi-r5s.dts -+F: arch/arm/dts/rk3568-nanopi-r5s.dtsi -+F: arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi -+ - RADXA-CM3 - M: Jagan Teki - S: Maintained ---- /dev/null -+++ b/configs/nanopi-r5s-rk3568_defconfig -@@ -0,0 +1,85 @@ -+CONFIG_ARM=y -+CONFIG_SKIP_LOWLEVEL_INIT=y -+CONFIG_COUNTER_FREQUENCY=24000000 -+CONFIG_ARCH_ROCKCHIP=y -+CONFIG_TEXT_BASE=0x00a00000 -+CONFIG_SPL_LIBCOMMON_SUPPORT=y -+CONFIG_SPL_LIBGENERIC_SUPPORT=y -+CONFIG_NR_DRAM_BANKS=2 -+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 -+CONFIG_DEFAULT_DEVICE_TREE="rk3568-nanopi-r5s" -+CONFIG_ROCKCHIP_RK3568=y -+CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y -+CONFIG_SPL_SERIAL=y -+CONFIG_SPL_STACK_R_ADDR=0x600000 -+CONFIG_TARGET_EVB_RK3568=y -+CONFIG_SPL_STACK=0x400000 -+CONFIG_DEBUG_UART_BASE=0xFE660000 -+CONFIG_DEBUG_UART_CLOCK=24000000 -+CONFIG_SYS_LOAD_ADDR=0xc00800 -+CONFIG_DEBUG_UART=y -+CONFIG_FIT=y -+CONFIG_FIT_VERBOSE=y -+CONFIG_SPL_LOAD_FIT=y -+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5s.dtb" -+# CONFIG_DISPLAY_CPUINFO is not set -+CONFIG_DISPLAY_BOARDINFO_LATE=y -+CONFIG_SPL_MAX_SIZE=0x40000 -+CONFIG_SPL_PAD_TO=0x7f8000 -+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -+CONFIG_SPL_BSS_START_ADDR=0x4000000 -+CONFIG_SPL_BSS_MAX_SIZE=0x4000 -+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -+CONFIG_SPL_STACK_R=y -+CONFIG_SPL_ATF=y -+CONFIG_CMD_GPIO=y -+CONFIG_CMD_GPT=y -+CONFIG_CMD_I2C=y -+CONFIG_CMD_MMC=y -+CONFIG_CMD_USB=y -+CONFIG_CMD_PMIC=y -+CONFIG_CMD_REGULATOR=y -+# CONFIG_SPL_DOS_PARTITION is not set -+CONFIG_SPL_OF_CONTROL=y -+CONFIG_OF_LIVE=y -+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" -+CONFIG_SPL_DM_WARN=y -+CONFIG_SPL_REGMAP=y -+CONFIG_SPL_SYSCON=y -+CONFIG_SPL_CLK=y -+CONFIG_ROCKCHIP_GPIO=y -+CONFIG_SYS_I2C_ROCKCHIP=y -+CONFIG_MISC=y -+CONFIG_SUPPORT_EMMC_RPMB=y -+CONFIG_MMC_DW=y -+CONFIG_MMC_DW_ROCKCHIP=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_SDMA=y -+CONFIG_MMC_SDHCI_ROCKCHIP=y -+CONFIG_ETH_DESIGNWARE=y -+CONFIG_GMAC_ROCKCHIP=y -+CONFIG_PHY_ROCKCHIP_INNO_USB2=y -+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y -+CONFIG_POWER_DOMAIN=y -+CONFIG_DM_PMIC=y -+CONFIG_PMIC_RK8XX=y -+CONFIG_SPL_DM_REGULATOR_FIXED=y -+CONFIG_REGULATOR_RK8XX=y -+CONFIG_PWM_ROCKCHIP=y -+CONFIG_SPL_RAM=y -+CONFIG_BAUDRATE=1500000 -+CONFIG_DEBUG_UART_SHIFT=2 -+CONFIG_SYS_NS16550_MEM32=y -+CONFIG_SYSRESET=y -+CONFIG_SYSRESET_PSCI=y -+CONFIG_USB=y -+CONFIG_USB_XHCI_HCD=y -+CONFIG_USB_XHCI_DWC3=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_USB_EHCI_GENERIC=y -+CONFIG_USB_OHCI_HCD=y -+CONFIG_USB_OHCI_GENERIC=y -+CONFIG_USB_DWC3=y -+CONFIG_ERRNO_STR=y diff --git a/package/boot/uboot-rockchip/patches/104-rockchip-rk3568-Add-support-for-FriendlyARM-NanoPi-R.patch b/package/boot/uboot-rockchip/patches/104-rockchip-rk3568-Add-support-for-FriendlyARM-NanoPi-R.patch deleted file mode 100644 index d1a5197e7d..0000000000 --- a/package/boot/uboot-rockchip/patches/104-rockchip-rk3568-Add-support-for-FriendlyARM-NanoPi-R.patch +++ /dev/null @@ -1,269 +0,0 @@ -From 41538742491c46100f570680c02fbdd0d2b6b880 Mon Sep 17 00:00:00 2001 -From: Tianling Shen -Date: Tue, 30 May 2023 15:00:33 +0800 -Subject: [PATCH] rockchip: rk3568: Add support for FriendlyARM NanoPi R5C - -FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device. - -Specification: -- Rockchip RK3568 -- 1/4GB LPDDR4X RAM -- 8/32GB eMMC -- SD card slot -- M.2 Connector -- 2x USB 3.0 Port -- 2x 2500 Base-T (PCIe, r8125) -- HDMI 2.0 -- MIPI DSI/CSI -- USB Type C 5V - -The device tree is taken from kernel v6.4-rc1. - -Reviewed-by: Kever Yang -Signed-off-by: Tianling Shen ---- - arch/arm/dts/Makefile | 1 + - arch/arm/dts/rk3568-nanopi-r5c-u-boot.dtsi | 3 + - arch/arm/dts/rk3568-nanopi-r5c.dts | 112 +++++++++++++++++++++ - board/rockchip/evb_rk3568/MAINTAINERS | 7 ++ - configs/nanopi-r5c-rk3568_defconfig | 85 ++++++++++++++++ - 5 files changed, 208 insertions(+) - create mode 100644 arch/arm/dts/rk3568-nanopi-r5c-u-boot.dtsi - create mode 100644 arch/arm/dts/rk3568-nanopi-r5c.dts - create mode 100644 configs/nanopi-r5c-rk3568_defconfig - ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -171,6 +171,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \ - rk3566-anbernic-rgxx3.dtb \ - rk3566-radxa-cm3-io.dtb \ - rk3568-evb.dtb \ -+ rk3568-nanopi-r5c.dtb \ - rk3568-nanopi-r5s.dtb \ - rk3568-rock-3a.dtb - ---- /dev/null -+++ b/arch/arm/dts/rk3568-nanopi-r5c-u-boot.dtsi -@@ -0,0 +1,3 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include "rk3568-nanopi-r5s-u-boot.dtsi" ---- /dev/null -+++ b/arch/arm/dts/rk3568-nanopi-r5c.dts -@@ -0,0 +1,112 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. -+ * (http://www.friendlyelec.com) -+ * -+ * Copyright (c) 2023 Tianling Shen -+ */ -+ -+/dts-v1/; -+#include "rk3568-nanopi-r5s.dtsi" -+ -+/ { -+ model = "FriendlyElec NanoPi R5C"; -+ compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568"; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&reset_button_pin>; -+ -+ button-reset { -+ debounce-interval = <50>; -+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; -+ label = "reset"; -+ linux,code = ; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>; -+ -+ led-lan { -+ color = ; -+ function = LED_FUNCTION_LAN; -+ gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ power_led: led-power { -+ color = ; -+ function = LED_FUNCTION_POWER; -+ linux,default-trigger = "heartbeat"; -+ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-wan { -+ color = ; -+ function = LED_FUNCTION_WAN; -+ gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-wlan { -+ color = ; -+ function = LED_FUNCTION_WLAN; -+ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; -+ -+&pcie2x1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pcie20_reset_pin>; -+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; -+ status = "okay"; -+}; -+ -+&pcie3x1 { -+ num-lanes = <1>; -+ reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; -+ vpcie3v3-supply = <&vcc3v3_pcie>; -+ status = "okay"; -+}; -+ -+&pcie3x2 { -+ num-lanes = <1>; -+ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; -+ vpcie3v3-supply = <&vcc3v3_pcie>; -+ status = "okay"; -+}; -+ -+&pinctrl { -+ gpio-leds { -+ lan_led_pin: lan-led-pin { -+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ power_led_pin: power-led-pin { -+ rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ wan_led_pin: wan-led-pin { -+ rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ wlan_led_pin: wlan-led-pin { -+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ }; -+ -+ pcie { -+ pcie20_reset_pin: pcie20-reset-pin { -+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; -+ }; -+ }; -+ -+ rockchip-key { -+ reset_button_pin: reset-button-pin { -+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; -+ }; -+ }; -+}; ---- a/board/rockchip/evb_rk3568/MAINTAINERS -+++ b/board/rockchip/evb_rk3568/MAINTAINERS -@@ -7,6 +7,13 @@ F: configs/evb-rk3568_defconfig - F: arch/arm/dts/rk3568-evb-boot.dtsi - F: arch/arm/dts/rk3568-evb.dts - -+NANOPI-R5C -+M: Tianling Shen -+S: Maintained -+F: configs/nanopi-r5c-rk3568_defconfig -+F: arch/arm/dts/rk3568-nanopi-r5c.dts -+F: arch/arm/dts/rk3568-nanopi-r5c-u-boot.dtsi -+ - NANOPI-R5S - M: Tianling Shen - S: Maintained ---- /dev/null -+++ b/configs/nanopi-r5c-rk3568_defconfig -@@ -0,0 +1,85 @@ -+CONFIG_ARM=y -+CONFIG_SKIP_LOWLEVEL_INIT=y -+CONFIG_COUNTER_FREQUENCY=24000000 -+CONFIG_ARCH_ROCKCHIP=y -+CONFIG_TEXT_BASE=0x00a00000 -+CONFIG_SPL_LIBCOMMON_SUPPORT=y -+CONFIG_SPL_LIBGENERIC_SUPPORT=y -+CONFIG_NR_DRAM_BANKS=2 -+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000 -+CONFIG_DEFAULT_DEVICE_TREE="rk3568-nanopi-r5c" -+CONFIG_ROCKCHIP_RK3568=y -+CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y -+CONFIG_SPL_SERIAL=y -+CONFIG_SPL_STACK_R_ADDR=0x600000 -+CONFIG_TARGET_EVB_RK3568=y -+CONFIG_SPL_STACK=0x400000 -+CONFIG_DEBUG_UART_BASE=0xFE660000 -+CONFIG_DEBUG_UART_CLOCK=24000000 -+CONFIG_SYS_LOAD_ADDR=0xc00800 -+CONFIG_DEBUG_UART=y -+CONFIG_FIT=y -+CONFIG_FIT_VERBOSE=y -+CONFIG_SPL_LOAD_FIT=y -+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-nanopi-r5c.dtb" -+# CONFIG_DISPLAY_CPUINFO is not set -+CONFIG_DISPLAY_BOARDINFO_LATE=y -+CONFIG_SPL_MAX_SIZE=0x40000 -+CONFIG_SPL_PAD_TO=0x7f8000 -+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -+CONFIG_SPL_BSS_START_ADDR=0x4000000 -+CONFIG_SPL_BSS_MAX_SIZE=0x4000 -+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -+CONFIG_SPL_STACK_R=y -+CONFIG_SPL_ATF=y -+CONFIG_CMD_GPIO=y -+CONFIG_CMD_GPT=y -+CONFIG_CMD_I2C=y -+CONFIG_CMD_MMC=y -+CONFIG_CMD_USB=y -+CONFIG_CMD_PMIC=y -+CONFIG_CMD_REGULATOR=y -+# CONFIG_SPL_DOS_PARTITION is not set -+CONFIG_SPL_OF_CONTROL=y -+CONFIG_OF_LIVE=y -+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" -+CONFIG_SPL_DM_WARN=y -+CONFIG_SPL_REGMAP=y -+CONFIG_SPL_SYSCON=y -+CONFIG_SPL_CLK=y -+CONFIG_ROCKCHIP_GPIO=y -+CONFIG_SYS_I2C_ROCKCHIP=y -+CONFIG_MISC=y -+CONFIG_SUPPORT_EMMC_RPMB=y -+CONFIG_MMC_DW=y -+CONFIG_MMC_DW_ROCKCHIP=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_SDMA=y -+CONFIG_MMC_SDHCI_ROCKCHIP=y -+CONFIG_ETH_DESIGNWARE=y -+CONFIG_GMAC_ROCKCHIP=y -+CONFIG_PHY_ROCKCHIP_INNO_USB2=y -+CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y -+CONFIG_POWER_DOMAIN=y -+CONFIG_DM_PMIC=y -+CONFIG_PMIC_RK8XX=y -+CONFIG_SPL_DM_REGULATOR_FIXED=y -+CONFIG_REGULATOR_RK8XX=y -+CONFIG_PWM_ROCKCHIP=y -+CONFIG_SPL_RAM=y -+CONFIG_BAUDRATE=1500000 -+CONFIG_DEBUG_UART_SHIFT=2 -+CONFIG_SYS_NS16550_MEM32=y -+CONFIG_SYSRESET=y -+CONFIG_SYSRESET_PSCI=y -+CONFIG_USB=y -+CONFIG_USB_XHCI_HCD=y -+CONFIG_USB_XHCI_DWC3=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_USB_EHCI_GENERIC=y -+CONFIG_USB_OHCI_HCD=y -+CONFIG_USB_OHCI_GENERIC=y -+CONFIG_USB_DWC3=y -+CONFIG_ERRNO_STR=y diff --git a/package/boot/uboot-rockchip/patches/105-nanopc-t4-fix-memory-unstability.patch b/package/boot/uboot-rockchip/patches/105-nanopc-t4-fix-memory-unstability.patch index 7d2161ae42..b467f48f72 100644 --- a/package/boot/uboot-rockchip/patches/105-nanopc-t4-fix-memory-unstability.patch +++ b/package/boot/uboot-rockchip/patches/105-nanopc-t4-fix-memory-unstability.patch @@ -12,8 +12,6 @@ Signed-off-by: Lu jicong arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi -index 17201bcf41..8b6c9059ab 100644 --- a/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi +++ b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi @@ -4,4 +4,4 @@