From: Tim Harvey Date: Fri, 8 Sep 2017 18:56:59 +0000 (-0700) Subject: cns3xxx: fix GPIO controller interrupt enable X-Git-Tag: v19.07.0-rc1~5833 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=79366b81945d38ce1afd0bca867a0a457e0605f9;p=openwrt%2Fstaging%2Fhauke.git cns3xxx: fix GPIO controller interrupt enable The cns3xxx interrupt controller uses a single register and as such the 'mask' reg/functions must be used as opposed to the 'enable'/'disable' reg/functions. This fixes an issue that occurs if more than one GPIO on a specific controller (there is GPIOA and GPIOB each having 32 GPIO's) uses interrupts. When one would get enabled all others would be disabled prior to this patch. Signed-off-by: Tim Harvey Acked-by: Koen Vandeputte --- diff --git a/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/gpio.c b/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/gpio.c index 19de24c349..bdf930a79e 100644 --- a/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/gpio.c +++ b/target/linux/cns3xxx/files/arch/arm/mach-cns3xxx/gpio.c @@ -273,10 +273,10 @@ void __init cns3xxx_gpio_init(int gpio_base, int ngpio, ct = gc->chip_types; ct->type = IRQ_TYPE_EDGE_FALLING; ct->regs.ack = GPIO_INTERRUPT_CLEAR; - ct->regs.enable = GPIO_INTERRUPT_ENABLE; ct->chip.irq_ack = irq_gc_ack_set_bit; - ct->chip.irq_enable = irq_gc_unmask_enable_reg; - ct->chip.irq_disable = irq_gc_mask_disable_reg; + ct->regs.mask = GPIO_INTERRUPT_ENABLE; + ct->chip.irq_enable = irq_gc_mask_set_bit; + ct->chip.irq_disable = irq_gc_mask_clr_bit; ct->chip.irq_set_type = cns3xxx_gpio_irq_set_type; ct->handler = handle_edge_irq;