From: Edward Chow <equu@openmail.cc>
Date: Sat, 5 Nov 2022 06:29:03 +0000 (+0800)
Subject: ath79: calibrate TL-WDR4900 v2 with nvmem-cells
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=79107116d115c4d96c5cd0446c11b3751e597fce;p=openwrt%2Fstaging%2Fnbd.git

ath79: calibrate TL-WDR4900 v2 with nvmem-cells

Driver for both soc (2.4GHz Wifi) and pci (5 GHz) now pull the calibration
data from the nvmem subsystem.

This allows us to move the userspace caldata extraction for the pci-e ath9k
supported wifi into the device-tree definition of the device.

wmac's nodes are also changed over to use nvmem-cells over OpenWrt's
custom mtd-cal-data property.

Signed-off-by: Edward Chow <equu@openmail.cc>
---

diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts b/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts
index 5b69a1708e..49c0e39492 100644
--- a/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts
@@ -96,10 +96,9 @@
 	ath9k: wifi@0,0 {
 		compatible = "pci168c,0033";
 		reg = <0x0000 0 0 0 0>;
-		nvmem-cells = <&macaddr_uboot_1fc00>;
-		nvmem-cell-names = "mac-address";
+		nvmem-cells = <&macaddr_uboot_1fc00>, <&cal_ath9k_pci>;
+		nvmem-cell-names = "mac-address", "calibration";
 		mac-address-increment = <(-2)>;
-		qca,no-eeprom;
 		#gpio-cells = <2>;
 		gpio-controller;
 	};
@@ -152,6 +151,14 @@
 				label = "u-boot";
 				reg = <0x000000 0x020000>;
 				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_uboot_1fc00: macaddr@1fc00 {
+					reg = <0x1fc00 0x6>;
+				};
 			};
 
 			partition@20000 {
@@ -164,6 +171,18 @@
 				label = "art";
 				reg = <0x7f0000 0x010000>;
 				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cal_ath9k_soc: cal_ath9k@1000 {
+					reg = <0x1000 0x440>;
+				};
+
+				cal_ath9k_pci: cal_ath9k@5000 {
+					reg = <0x5000 0x440>;
+				};
 			};
 		};
 	};
@@ -219,18 +238,7 @@
 &wmac {
 	status = "okay";
 
-	mtd-cal-data = <&art 0x1000>;
-	nvmem-cells = <&macaddr_uboot_1fc00>;
-	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&macaddr_uboot_1fc00>, <&cal_ath9k_soc>;
+	nvmem-cell-names = "mac-address", "calibration";
 	mac-address-increment = <(-1)>;
 };
-
-&uboot {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_uboot_1fc00: macaddr@1fc00 {
-		reg = <0x1fc00 0x6>;
-	};
-};
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 6dd237e1fa..924d6407af 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -94,7 +94,6 @@ case "$FIRMWARE" in
 	tplink,tl-wdr4300-v1|\
 	tplink,tl-wdr4300-v1-il|\
 	tplink,tl-wdr4310-v1|\
-	tplink,tl-wdr4900-v2|\
 	ubnt,unifi-ap-pro|\
 	watchguard,ap100|\
 	watchguard,ap200|\