From: Olivier Valentin Date: Thu, 2 Dec 2021 16:05:18 +0000 (+0100) Subject: ath79: add support for jjPlus JWAP230 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7853453950bf47b518673dc50b61903cd48c9081;p=openwrt%2Fstaging%2Fthess.git ath79: add support for jjPlus JWAP230 The jjPlus JWAP230 is an access point board built around the QCA9558, with built-in 2.4GHz 3x3 N WiFi (28dBm). It can be expanded with 2 mini-PCIe boards, and has an USB2 root port. Specifications: - SOC: Qualcomm Atheros QCA9558 - CPU: 720MHz - H/W switch: QCA8327 rev 2 - Flash: 16 MiB SPI NOR (en25qh128) - RAM: 128 MiB DDR2 - WLAN: AR9550 built-in SoC bgn 3T3R (ath9k) - PCI: 2x mini-PCIe (optional 5V) - LEDs: 6x LEDs (3 are currently available) - Button: 1x Reset (not yet defined) - USB2: - 1x Type A root port - 1x combined mini-PCIe - Ethernet: - 2x 10/100/1000 (1x PoE 802.3af (36-57 V)) Notes: The device used to be supported in the ar71xx target. For upgrades: Please use "sysupgrade --force -n ". This will restore the device back to OpenWrt defaults! MAC address assignment: use source LAN art 0x0 WAN art 0x6 WLAN art 0x1002 (as part of the calibration data) Flash instructions: - install from u-boot with tftp (requires serial access) > setenv ipaddr a.b.c.d > setenv serverip e.f.g.h > tftp 0x80060000 \ openwrt-ath79-generic-jjplus_jwap230-squashfs-sysupgrade.bin > erase 0x9f050000 +${filesize} > cp.b $fileaddr 0x9f050000 $filesize > setenv bootcmd bootm 0x9f050000 > saveenv Signed-off-by: Olivier Valentin [Added DT-Leds (based on ar71xx), Added more notes about sysupgrade, fixed "qca9550" to match SoC in commit and dts file name] Signed-off-by: Christian Lamparter --- diff --git a/target/linux/ath79/dts/qca9558_jjplus_jwap230.dts b/target/linux/ath79/dts/qca9558_jjplus_jwap230.dts new file mode 100644 index 0000000000..159013066f --- /dev/null +++ b/target/linux/ath79/dts/qca9558_jjplus_jwap230.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca955x.dtsi" + +#include +#include +#include + +/ { + model = "jjPlus JWAP230"; + compatible = "jjplus,jwap230", "qca,qca9558"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led-0 { + label = "green:power"; + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = ; + function-enumerator = <0>; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + + led-2 { + color = ; + function-enumerator = <1>; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_art_lan: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_art_wan: macaddr@6 { + reg = <0x6 0x6>; + }; + + calibration_art_wlan: calibration@1000 { + reg = <0x1000 0x440>; + }; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + switch { + compatible = "qca,ar8327"; + reg = <0>; + + qca,ar8327-initvals = < + 0x04 0x07600000 /* PORT0 PAD MODE CTRL */ + 0x58 0xffb7ffb7 /* LED_CTRL2 */ + 0x5c 0x03ffff00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */ + 0x94 0x0000007e /* PORT6_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + nvmem-cells = <&macaddr_art_wan>; + nvmem-cell-names = "mac-address"; + + pll-data = <0xae000000 0x80000101 0x80001313>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + gmac_config: gmac-config { + device = <&gmac>; + + rxdv-delay = <3>; + rxd-delay = <3>; + txen-delay = <0>; + txd-delay = <0>; + rgmii-enabled = <1>; + }; +}; + +ð1 { + status = "okay"; + + nvmem-cells = <&macaddr_art_lan>; + nvmem-cell-names = "mac-address"; + + pll-data = <0x03000101 0x00000101 0x00001313>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&wmac { + status = "okay"; + nvmem-cells = <&calibration_art_wlan>; + nvmem-cell-names = "calibration"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 11e8d59058..45b002330e 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -306,6 +306,10 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" ;; + jjplus,jwap230) + ucidef_add_switch "switch0" \ + "0@eth0" "5:wan:1" "1:lan:2" "6@eth1" + ;; joyit,jt-or750i) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index c259db94af..cff4b98eae 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1407,6 +1407,14 @@ define Device/jjplus_ja76pf2 endef TARGET_DEVICES += jjplus_ja76pf2 +define Device/jjplus_jwap230 + SOC := qca9558 + DEVICE_VENDOR := jjPlus + DEVICE_MODEL := JWAP230 + IMAGE_SIZE := 16000k +endef +TARGET_DEVICES += jjplus_jwap230 + define Device/joyit_jt-or750i SOC := qca9531 DEVICE_VENDOR := Joy-IT