From: Xavier Franquet Date: Mon, 20 Nov 2023 07:18:00 +0000 (+0100) Subject: mediatek: filogic: add support ASUS RT-AX59U X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=782eb050082acac93c2f9b3eb22348234bc93e99;p=openwrt%2Fstaging%2Fnbd.git mediatek: filogic: add support ASUS RT-AX59U (based on support for ASUS RT-AX59U by liushiyou006) SOC: MediaTek MT7986 RAM: 512MB DDR4 FLASH: 128MB SPI-NAND (Winbond W25N01GV) WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz ETH: MediaTek MT7531 Switch UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Upgrade from AsusWRT to OpenWRT using UART Download the OpenWrt initramfs image. Copy the image to a TFTP server reachable at 192.168.1.70/24. Rename the image to rtax59u.bin. Connect the PC with TFTP server to the RT-AX59U. Set a static ip on the ethernet interface of your PC. (ip address: 192.168.1.70, subnet mask:255.255.255.0) Conect to the serial console, interrupt the autoboot process by pressing '4' when prompted. Download & Boot the OpenWrt initramfs image. $ setenv ipaddr 192.168.1.1 $ setenv serverip 192.168.1.70 $ tftpboot 0x46000000 rtax59u.bin $ bootm 0x46000000 Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n Upgrade from AsusWRT to OpenWRT using WebUI Download transit TRX file from https://drive.google.com/drive/folders/1A20QdjK7Udagu31FSszpWAk8-cGlCwsq Upgrade firmware from WebUI (192.168.50.1) using downloaded TRX file Wait for OpenWRT to boot (192.168.1.1). Upgrade system with sysupgrade image using luci or uploading it through scp and executing sysupgrade command MAC Address for WLAN 5g is not following the same algorithm as in AsusWRT. We have increased by one the WLAN 5g to avoid collisions with other networks from WLAN 2g when bit 28 is already set. : Stock : OpenWrt WLAN 2g (1) : C8:xx:xx:0D:xx:D4 : C8:xx:xx:0D:xx:D4 WLAN 2g (2) : : CA:xx:xx:0D:xx:D4 WLAN 2g (3) : : CE:xx:xx:0D:xx:D4 WLAN 5g (1) : CA:xx:xx:1D:xx:D4 : CA:xx:xx:1D:xx:D5 WLAN 5g (2) : : CE:xx:xx:1D:xx:D5 WLAN 5g (3) : : C2:xx:xx:1D:xx:D5 WLAN 2g (1) : 08:xx:xx:76:xx:BE : 08:xx:xx:76:xx:BE WLAN 2g (2) : : 0A:xx:xx:76:xx:BE WLAN 2g (3) : : 0E:xx:xx:76:xx:BE WLAN 5g (1) : 0A:xx:xx:76:xx:BE : 0A:xx:xx:76:xx:BF WLAN 5g (2) : : 0E:xx:xx:76:xx:BF WLAN 5g (3) : : 02:xx:xx:76:xx:BF Signed-off-by: Xavier Franquet --- diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 8e8cb67a71..b4957c212b 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -12,6 +12,9 @@ touch /etc/config/ubootenv board=$(board_name) case "$board" in +asus,rt-ax59u) + ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000" + ;; bananapi,bpi-r3) rootdev="$(cmdline_get_var root)" rootdev="${rootdev##*/}" diff --git a/target/linux/mediatek/dts/mt7986a-asus-rt-ax59u.dts b/target/linux/mediatek/dts/mt7986a-asus-rt-ax59u.dts new file mode 100644 index 0000000000..15cd69aaae --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-asus-rt-ax59u.dts @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include +#include +#include + +#include "mt7986a.dtsi" + +/ { + + model = "ASUS RT-AX59U"; + compatible = "asus,rt-ax59u", "mediatek,mt7986a"; + + aliases { + serial0 = &uart0; + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_blue; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-override = "ubi.mtd=UBI_DEV"; + }; + + memory { + reg = <0 0x40000000 0 0x20000000>; + }; + + keys { + compatible = "gpio-keys"; + + button-0 { + label = "wps"; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-1 { + label = "reset"; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + + led_status_red: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 12 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: led-2 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 13 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + out { + gpio-export,name = "led-light"; + gpio-export,output = <0>; + gpios = <&pio 22 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + /* LAN */ + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "wan"; + }; + + port@2 { + reg = <2>; + label = "lan1"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan3"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; + }; +}; + +&pio { + spi_flash_pins: spi-flash-pins-33-to-38 { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; + + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + spi_nand: spi_nand@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <20000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x400000>; + read-only; + }; + + partition@400000 { + label = "UBI_DEV"; + reg = <0x400000 0x7c00000>; + }; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + pinctrl-names = "default", "dbdc"; + pinctrl-0 = <&wf_2g_5g_pins>; + pinctrl-1 = <&wf_dbdc_pins>; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&ssusb { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index adbd937acf..a36d998a40 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -14,6 +14,15 @@ mediatek_setup_interfaces() acer,predator-w6) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1 ;; + asus,rt-ax59u|\ + cetron,ct3003|\ + confiabits,mt7981|\ + cudy,wr3000-v1|\ + jcg,q30-pro|\ + qihoo,360t7|\ + routerich,ax3000) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan + ;; asus,tuf-ax4200|\ mediatek,mt7981-rfb|\ zbtlink,zbt-z8102ax) @@ -25,14 +34,6 @@ mediatek_setup_interfaces() bananapi,bpi-r3) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan" ;; - cetron,ct3003|\ - confiabits,mt7981|\ - cudy,wr3000-v1|\ - jcg,q30-pro|\ - qihoo,360t7|\ - routerich,ax3000) - ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan - ;; cmcc,rax3000m|\ h3c,magic-nx30-pro|\ zbtlink,zbt-z8103ax) @@ -96,6 +97,7 @@ mediatek_setup_macs() local label_mac="" case $board in + asus,rt-ax59u|\ asus,tuf-ax4200|\ asus,tuf-ax6000) CI_UBIPART="UBI_DEV" diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata index e3181b2d8c..cbbf1871a5 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata @@ -59,6 +59,7 @@ case "$FIRMWARE" in ;; "mediatek/mt7986_eeprom_mt7976_dbdc.bin") case "$board" in + asus,rt-ax59u|\ asus,tuf-ax4200) CI_UBIPART="UBI_DEV" caldata_extract_ubi "Factory" 0x0 0x1000 diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index ca98350a1b..7f013732d3 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -16,6 +16,16 @@ case "$board" in [ "$PHYNBR" = "1" ] && cat $key_path/6gMAC > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "2" ] && cat $key_path/5gMAC > /sys${DEVPATH}/macaddress ;; + asus,rt-ax59u) + CI_UBIPART="UBI_DEV" + addr=$(mtd_get_mac_binary_ubi "Factory" 0x4) + # Originally, phy1 is phy0 mac with LA and 28th bits set. However, this would conflict + # addresses on multiple VIFs with the other radio when bit 28 is already set. + # Set LA and 28 bits and increment mac-address instead. + [ "$PHYNBR" = "1" ] && \ + macaddr_setbit_la $(macaddr_setbit $(macaddr_add $addr 1) 28) > \ + /sys${DEVPATH}/macaddress + ;; asus,tuf-ax4200|\ asus,tuf-ax6000) CI_UBIPART="UBI_DEV" diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index e59ffcfbc7..9600f8745f 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -1,5 +1,16 @@ REQUIRE_IMAGE_METADATA=1 +asus_initial_setup() +{ + # initialize UBI if it's running on initramfs + [ "$(rootfs_type)" = "tmpfs" ] || return 0 + + ubirmvol /dev/ubi0 -N rootfs + ubirmvol /dev/ubi0 -N rootfs_data + ubirmvol /dev/ubi0 -N jffs2 + ubimkvol /dev/ubi0 -N jffs2 -s 0x3e000 +} + xiaomi_initial_setup() { # initialize UBI and setup uboot-env if it's running on initramfs @@ -60,6 +71,7 @@ platform_do_upgrade() { CI_ROOTPART="rootfs" emmc_do_upgrade "$1" ;; + asus,rt-ax59u|\ asus,tuf-ax4200|\ asus,tuf-ax6000) CI_UBIPART="UBI_DEV" @@ -194,6 +206,11 @@ platform_pre_upgrade() { local board=$(board_name) case "$board" in + asus,rt-ax59u|\ + asus,tuf-ax4200|\ + asus,tuf-ax6000) + asus_initial_setup + ;; xiaomi,mi-router-wr30u-stock|\ xiaomi,redmi-router-ax6000-stock) xiaomi_initial_setup diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 249810bcd8..15951df1ec 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -175,6 +175,16 @@ $(call Device/adtran_smartrg) endef TARGET_DEVICES += smartrg_sdg-8632 +define Device/asus_rt-ax59u + DEVICE_VENDOR := ASUS + DEVICE_MODEL := RT-AX59U + DEVICE_DTS := mt7986a-asus-rt-ax59u + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += asus_rt-ax59u + define Device/asus_tuf-ax4200 DEVICE_VENDOR := ASUS DEVICE_MODEL := TUF-AX4200