From: Nicolas Thill Date: Fri, 16 Apr 2010 10:31:12 +0000 (+0000) Subject: package/mac80211: move all configuration items in submenus, merge Config.in* into... X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=782beb1cc40cf4124fe13634a9b76cd08248b0cc;p=openwrt%2Fstaging%2Fneocturne.git package/mac80211: move all configuration items in submenus, merge Config.in* into the main Makefile SVN-Revision: 20910 --- diff --git a/package/mac80211/Config.in b/package/mac80211/Config.in deleted file mode 100644 index 5994ba71ef..0000000000 --- a/package/mac80211/Config.in +++ /dev/null @@ -1,11 +0,0 @@ -# mac80211 configuration - -config PACKAGE_MAC80211_DEBUGFS - bool "Export mac80211 internals in DebugFS" - depends on PACKAGE_kmod-mac80211 - default y - ---help--- - Select this to see extensive information about - the internal state of mac80211 in debugfs. - - Say N unless you know you need this. diff --git a/package/mac80211/Config.in.ath9k b/package/mac80211/Config.in.ath9k deleted file mode 100644 index 70a36c97ce..0000000000 --- a/package/mac80211/Config.in.ath9k +++ /dev/null @@ -1,16 +0,0 @@ -# mac80211 configuration - -config PACKAGE_ATH9K_DEBUG - bool "ath9k debugging" - depends PACKAGE_kmod-ath9k && KERNEL_DEBUG_FS - ---help--- - Say Y, if you need ath9k to display debug messages. - Pass the debug mask as a module parameter: - - modprobe ath9k debug=0x00002000 - - Look in ath9k/core.h for possible debug masks - -config PACKAGE_ATH9K_USE_MINSTREL - bool "use the new minstrel_ht rate control for ath9k" - depends PACKAGE_kmod-ath9k diff --git a/package/mac80211/Config.in.b43 b/package/mac80211/Config.in.b43 deleted file mode 100644 index e1f4d37d72..0000000000 --- a/package/mac80211/Config.in.b43 +++ /dev/null @@ -1,79 +0,0 @@ -# B43 configuration - -choice - prompt "b43 firmware version" - depends on PACKAGE_kmod-b43 - default B43_EXPERIMENTAL - help - This option allows you to select the version of the b43 firmware. - -config B43_STABLE - bool "4.150.10.5 (stable)" - help - Stable firmware for BCM43xx devices. - - If unsure, select this. - -config B43_EXPERIMENTAL - bool "4.178.10.4 (experimental)" - help - Experimental firmware for BCM43xx devices. - - This firmware is not tested as much as the "stable" firmware. - - If unsure, select the "stable" firmware. - -config B43_OPENFIRMWARE - bool "Open FirmWare for WiFi networks" - help - Opensource firmware for BCM43xx devices. - - Do _not_ select this, unless you know what you are doing. - The Opensource firmware is not suitable for embedded devices, yet. - It does not support QoS, which is bad for AccessPoints. - It does not support hardware crypto acceleration, which is a showstopper - for embedded devices with low CPU resources. - - If unsure, select the "stable" firmware. - -endchoice - -config B43_FW_SQUASH - bool "Remove unnecessary firmware files" - depends on PACKAGE_kmod-b43 && !B43_OPENFIRMWARE - default y - help - This options allows you to remove unnecessary b43 firmware files - from the final rootfs image. This can reduce the rootfs size by - up to 200k. - - If unsure, say Y. - -config B43_FW_SQUASH_COREREVS - string "Core revisions to include" - depends on PACKAGE_kmod-b43 && B43_FW_SQUASH - default "5,6,7,8,9,10,13,14,15" - help - This is a comma seperated list of core revision numbers. - Example (keep files for rev5 only): - 5 - Example (keep files for rev5 and rev11): - 5,11 - -config B43_FW_SQUASH_PHYTYPES - string "PHY types to include" - depends on PACKAGE_kmod-b43 && B43_FW_SQUASH - default "G,LP" - help - This is a comma seperated list of PHY types: - A => A-PHY - AG => Dual A-PHY G-PHY - G => G-PHY - LP => LP-PHY - N => N-PHY - - Example (keep files for G-PHY only): - G - Example (keep files for G-PHY and N-PHY): - G,N - diff --git a/package/mac80211/Config.in.b43legacy b/package/mac80211/Config.in.b43legacy deleted file mode 100644 index 2e2f06e5ae..0000000000 --- a/package/mac80211/Config.in.b43legacy +++ /dev/null @@ -1,24 +0,0 @@ -# B43 configuration - -config B43LEGACY_FW_SQUASH - bool "Remove unnecessary firmware files" - depends on PACKAGE_kmod-b43legacy - default y - help - This options allows you to remove unnecessary b43legacy firmware files - from the final rootfs image. This can reduce the rootfs size by - up to 50k. - - If unsure, say Y. - -config B43LEGACY_FW_SQUASH_COREREVS - string "Core revisions to include" - depends on PACKAGE_kmod-b43legacy && B43LEGACY_FW_SQUASH - default "1,2,3,4" - help - This is a comma seperated list of core revision numbers. - Example (keep files for rev4 only): - 4 - Example (keep files for rev2 and rev4): - 2,4 - diff --git a/package/mac80211/Config.in.rt2x00 b/package/mac80211/Config.in.rt2x00 deleted file mode 100644 index f9855145b6..0000000000 --- a/package/mac80211/Config.in.rt2x00 +++ /dev/null @@ -1,15 +0,0 @@ -# rt2x00 configuration - -config PACKAGE_RT2X00_LIB_DEBUGFS - bool "Enable rt2x00 debugfs support" - depends PACKAGE_kmod-rt2x00-lib && PACKAGE_MAC80211_DEBUGFS - ---help--- - Enable creation of debugfs files for the rt2x00 drivers. - These debugfs files support both reading and writing of the - most important register types of the rt2x00 hardware. - -config PACKAGE_RT2X00_DEBUG - bool "Enable rt2x00 debug output" - depends PACKAGE_kmod-rt2x00-lib - ---help--- - Enable debugging output for all rt2x00 modules diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index 29b8556291..d586e0532f 100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -66,10 +66,23 @@ define KernelPackage/mac80211 DEPENDS+= +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-cfg80211 FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,21,mac80211) + MENU:=1 endef define KernelPackage/mac80211/config - source "$(SOURCE)/Config.in" + menu "Configuration" + depends on PACKAGE_kmod-mac80211 + + config PACKAGE_MAC80211_DEBUGFS + bool "Export mac80211 internals in DebugFS" + default y + help + Select this to see extensive information about + the internal state of mac80211 in debugfs. + + Say N unless you know you need this. + + endmenu endef define KernelPackage/mac80211/description @@ -186,10 +199,27 @@ $(call KernelPackage/rt2x00/Default) TITLE+= (LIB) FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,25,rt2x00lib) + MENU:=1 endef define KernelPackage/rt2x00-lib/config - source "$(SOURCE)/Config.in.rt2x00" + menu "Configuration" + depends PACKAGE_kmod-rt2x00-lib + + config PACKAGE_RT2X00_LIB_DEBUGFS + bool "Enable rt2x00 debugfs support" + depends PACKAGE_MAC80211_DEBUGFS + help + Enable creation of debugfs files for the rt2x00 drivers. + These debugfs files support both reading and writing of the + most important register types of the rt2x00 hardware. + + config PACKAGE_RT2X00_DEBUG + bool "Enable rt2x00 debug output" + help + Enable debugging output for all rt2x00 modules + + endmenu endef define KernelPackage/rt2x00-pci @@ -321,24 +351,27 @@ define KernelPackage/zd1211rw endef define KernelPackage/ath/config + menu "Configuration" + depends on PACKAGE_kmod-ath + + config ATH_USER_REGD + bool "Force Atheros drivers to respect the user's regdomain settings" + help + Atheros' idea of regulatory handling is that the EEPROM of the card defines + the regulatory limits and the user is only allowed to restrict the settings + even further, even if the country allows frequencies or power levels that + are forbidden by the EEPROM settings. + + Select this option if you want the driver to respect the user's decision about + regulatory settings. -config ATH_USER_REGD - bool "Force Atheros drivers to respect the user's regdomain settings" - depends on PACKAGE_kmod-ath - help - Atheros' idea of regulatory handling is that the EEPROM of the card defines - the regulatory limits and the user is only allowed to restrict the settings - even further, even if the country allows frequencies or power levels that - are forbidden by the EEPROM settings. - Select this option if you want the driver to respect the user's decision about - regulatory settings. - -config PACKAGE_ATH_DEBUG - bool "Atheros wireless debugging" - depends on PACKAGE_kmod-ath - help - Say Y, if you want to debug atheros wireless drivers. - Right now only ath9k makes use of this. + config PACKAGE_ATH_DEBUG + bool "Atheros wireless debugging" + help + Say Y, if you want to debug atheros wireless drivers. + Right now only ath9k makes use of this. + + endmenu endef define KernelPackage/ath @@ -347,6 +380,7 @@ define KernelPackage/ath DEPENDS+= @PCI_SUPPORT +kmod-mac80211 FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,26,ath) + MENU:=1 endef define KernelPackage/ath/description @@ -377,6 +411,7 @@ define KernelPackage/ath9k $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.$(LINUX_KMOD_SUFFIX) \ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,27,ath9k_hw ath9k_common ath9k) + MENU:=1 endef define KernelPackage/ath9k/description @@ -385,7 +420,24 @@ Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets. endef define KernelPackage/ath9k/config - source "$(SOURCE)/Config.in.ath9k" + menu "Configuration" + depends PACKAGE_kmod-ath9k + + config PACKAGE_ATH9K_DEBUG + bool "ath9k debugging" + depends KERNEL_DEBUG_FS + help + Say Y, if you need ath9k to display debug messages. + Pass the debug mask as a module parameter: + + modprobe ath9k debug=0x00002000 + + Look in ath9k/core.h for possible debug masks + + config PACKAGE_ATH9K_USE_MINSTREL + bool "use the new minstrel_ht rate control for ath9k" + + endmenu endef USB8388FW_NAME:=usb8388 @@ -579,10 +631,93 @@ $(call KernelPackage/b43-common) TITLE:=Broadcom 43xx wireless support FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,30,b43) + MENU:=1 endef define KernelPackage/b43/config - source "$(SOURCE)/Config.in.b43" + menu "Configuration" + depends on PACKAGE_kmod-b43 + + choice + prompt "b43 firmware version" + default B43_EXPERIMENTAL + help + This option allows you to select the version of the b43 firmware. + + config B43_STABLE + bool "4.150.10.5 (stable)" + help + Stable firmware for BCM43xx devices. + + If unsure, select this. + + config B43_EXPERIMENTAL + bool "4.178.10.4 (experimental)" + help + Experimental firmware for BCM43xx devices. + + This firmware is not tested as much as the "stable" firmware. + + If unsure, select the "stable" firmware. + + config B43_OPENFIRMWARE + bool "Open FirmWare for WiFi networks" + help + Opensource firmware for BCM43xx devices. + + Do _not_ select this, unless you know what you are doing. + The Opensource firmware is not suitable for embedded devices, yet. + It does not support QoS, which is bad for AccessPoints. + It does not support hardware crypto acceleration, which is a showstopper + for embedded devices with low CPU resources. + + If unsure, select the "stable" firmware. + + endchoice + + config B43_FW_SQUASH + bool "Remove unnecessary firmware files" + depends on !B43_OPENFIRMWARE + default y + help + This options allows you to remove unnecessary b43 firmware files + from the final rootfs image. This can reduce the rootfs size by + up to 200k. + + If unsure, say Y. + + config B43_FW_SQUASH_COREREVS + string "Core revisions to include" + depends on B43_FW_SQUASH + default "5,6,7,8,9,10,13,14,15" + help + This is a comma seperated list of core revision numbers. + + Example (keep files for rev5 only): + 5 + + Example (keep files for rev5 and rev11): + 5,11 + + config B43_FW_SQUASH_PHYTYPES + string "PHY types to include" + depends on B43_FW_SQUASH + default "G,LP" + help + This is a comma seperated list of PHY types: + A => A-PHY + AG => Dual A-PHY G-PHY + G => G-PHY + LP => LP-PHY + N => N-PHY + + Example (keep files for G-PHY only): + G + + Example (keep files for G-PHY and N-PHY): + G,N + + endmenu endef define KernelPackage/b43/description @@ -594,10 +729,37 @@ $(call KernelPackage/b43-common) TITLE:=Broadcom 43xx-legacy wireless support FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,30,b43legacy) + MENU:=1 endef define KernelPackage/b43legacy/config - source "$(SOURCE)/Config.in.b43legacy" + menu "Configuration" + depends on PACKAGE_kmod-b43legacy + + config B43LEGACY_FW_SQUASH + bool "Remove unnecessary firmware files" + default y + help + This options allows you to remove unnecessary b43legacy firmware files + from the final rootfs image. This can reduce the rootfs size by + up to 50k. + + If unsure, say Y. + + config B43LEGACY_FW_SQUASH_COREREVS + string "Core revisions to include" + depends on B43LEGACY_FW_SQUASH + default "1,2,3,4" + help + This is a comma seperated list of core revision numbers. + + Example (keep files for rev4 only): + 4 + + Example (keep files for rev2 and rev4): + 2,4 + + endmenu endef define KernelPackage/b43legacy/description