From: John Crispin <john@openwrt.org>
Date: Fri, 1 Jan 2016 21:20:02 +0000 (+0000)
Subject: ltq-vdsl-app: add/enable missing G.993.2 XTSE bits
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7816dffd036f6d29bb885478defbf875cdbde003;p=openwrt%2Fstaging%2Fthess.git

ltq-vdsl-app: add/enable missing G.993.2 XTSE bits

This patch adds the missing VDSL2 bits to the annex specific XTSE (like
it should be according to the comments above the XTSE bits).

Since r47933 it's mandatory to remove the annex option to switch to
VDSL2 (only) operation mode.

As shown by ticket #21436 and a few mails I received personally, even
experienced users are not aware that they have to remove the annex
option to get their VDSL2 line working and as shown by this patch it
doesn't need to be that "complicated".

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48051
---

diff --git a/package/network/config/ltq-vdsl-app/files/dsl_control b/package/network/config/ltq-vdsl-app/files/dsl_control
index cc65daad41..22d775cf39 100644
--- a/package/network/config/ltq-vdsl-app/files/dsl_control
+++ b/package/network/config/ltq-vdsl-app/files/dsl_control
@@ -11,16 +11,20 @@ EXTRA_HELP="	status  Get DSL status information
 
 [ -f /lib/functions/lantiq_dsl.sh ] && . /lib/functions/lantiq_dsl.sh
 
+#
+# ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE))
+#
 # G.992.1 Annex A
 # G.992.3 Annex A / L-US1 / L_US-2 / M
 # G.992.5 Annex A / M
-xtse_adsl_a="04_00_04_00_4C_01_04_00"
+# G.993.2 Annex A/B/C
+xtse_xdsl_a="04_00_04_00_4C_01_04_07"
 
 # G.992.1 Annex B
 # G.992.3 Annex B
 # G.992.5 Annex B
 # G.993.2 Annex A/B/C
-xtse_adsl_b="10_00_10_00_00_04_00_00"
+xtse_adsl_b="10_00_10_00_00_04_00_07"
 
 # G.992.1 Annex B
 # G.992.3 Annex B
@@ -28,7 +32,7 @@ xtse_adsl_b="10_00_10_00_00_04_00_00"
 # G.992.5 Annex B
 # G.992.5 Annex J
 # G.993.2 Annex A/B/C
-xtse_adsl_j="10_00_10_40_00_04_01_00"
+xtse_adsl_j="10_00_10_40_00_04_01_07"
 
 xtse_vdsl="00_00_00_00_00_00_00_07"
 
@@ -40,7 +44,6 @@ start_service() {
 	local annex
 	local firmware
 	local xtse
-	local xtse_adsl
 	local mode
 
 	config_load network
@@ -63,12 +66,8 @@ start_service() {
 		;;
 	esac
 
-	eval "xtse_adsl=\"\${xtse_adsl_$annex}\""
-	if [ "${xtse_adsl}" ]; then
-		xtse=$xtse_adsl
-	else
-		xtse=$xtse_vdsl
-	fi
+	eval "xtse=\"\${xtse_xdsl_$annex}\""
+	[ -z "${xtse}" ] && xtse=$xtse_vdsl
 
 	[ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
 	[ -f "${firmware}" ] || {