From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 27 Sep 2013 11:15:34 +0000 (+0000)
Subject: ar71xx: ar934x-nfc: disable subpage write when hardware ECC is used
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7815af409af011e1a5572fde06450cb42130d461;p=openwrt%2Fstaging%2Frmilecki.git

ar71xx: ar934x-nfc: disable subpage write when hardware ECC is used

It is not supported by the controller.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38234
---

diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c b/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c
index 8b6658087fb..92312515937 100644
--- a/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c
+++ b/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c
@@ -1281,6 +1281,12 @@ ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc)
 
 	switch (nfc->mtd.writesize) {
 	case 2048:
+		/*
+		 * Writing a subpage separately is not supported, because
+		 * the controller only does ECC on full-page accesses.
+		 */
+		nand->options = NAND_NO_SUBPAGE_WRITE;
+
 		nand->ecc.size = 512;
 		nand->ecc.bytes = 7;
 		nand->ecc.strength = 4;