From: Rafał Miłecki Date: Sat, 28 Feb 2015 23:39:14 +0000 (+0000) Subject: adm5120: add 3.18 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=780d6939b2ae13603734b815b8dd9772842f4c70;p=openwrt%2Fstaging%2Fldir.git adm5120: add 3.18 support Signed-off-by: Rafał Miłecki SVN-Revision: 44580 --- diff --git a/target/linux/adm5120/config-3.18 b/target/linux/adm5120/config-3.18 new file mode 100644 index 0000000000..2d3c7dae06 --- /dev/null +++ b/target/linux/adm5120/config-3.18 @@ -0,0 +1,190 @@ +CONFIG_ADM5120=y +CONFIG_ADM5120_ENET=y +CONFIG_ADM5120_MACH_5GXI=y +CONFIG_ADM5120_MACH_BR_6104K=y +CONFIG_ADM5120_MACH_BR_6104KP=y +CONFIG_ADM5120_MACH_BR_61X4WG=y +CONFIG_ADM5120_MACH_CAS_771=y +CONFIG_ADM5120_MACH_EASY5120P_ATA=y +CONFIG_ADM5120_MACH_EASY5120_RT=y +CONFIG_ADM5120_MACH_EASY5120_WVOIP=y +CONFIG_ADM5120_MACH_EASY83000=y +CONFIG_ADM5120_MACH_EB_214A=y +CONFIG_ADM5120_MACH_NFS_101=y +CONFIG_ADM5120_MACH_NP27G=y +CONFIG_ADM5120_MACH_NP28G=y +CONFIG_ADM5120_MACH_PMUGW=y +# CONFIG_ADM5120_MACH_RB_11X is not set +# CONFIG_ADM5120_MACH_RB_133 is not set +# CONFIG_ADM5120_MACH_RB_133C is not set +# CONFIG_ADM5120_MACH_RB_150 is not set +# CONFIG_ADM5120_MACH_RB_153 is not set +# CONFIG_ADM5120_MACH_RB_192 is not set +CONFIG_ADM5120_MACH_WP54=y +CONFIG_ADM5120_OEM_CELLVISION=y +CONFIG_ADM5120_OEM_COMPEX=y +CONFIG_ADM5120_OEM_EDIMAX=y +CONFIG_ADM5120_OEM_GENERIC=y +CONFIG_ADM5120_OEM_INFINEON=y +# CONFIG_ADM5120_OEM_MIKROTIK is not set +CONFIG_ADM5120_OEM_MOTOROLA=y +CONFIG_ADM5120_OEM_OSBRIDGE=y +# CONFIG_ADM5120_OEM_ZYXEL is not set +CONFIG_ADM5120_SOC_BGA=y +CONFIG_ADM5120_WDT=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM_AMBA=y +# CONFIG_ARM_SP805_WATCHDOG is not set +CONFIG_ATA=m +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CMDLINE="console=ttyAM0,115200 rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +CONFIG_CPU_MIPSR1=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HID=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_PCI=m +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INPUT=m +# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set +CONFIG_IRQ_CPU=y +CONFIG_IRQ_FORCED_THREADING=y +# CONFIG_LEDS_TRIGGER_ADM5120_SWITCH is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_MII=m +CONFIG_MIPS=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_O32_FP64_SUPPORT is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_ADM5120=y +CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_MYLOADER_PARTS=y +CONFIG_MTD_TRXSPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NLS=m +CONFIG_NO_EXCEPT_FILL=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_NO_HZ=y +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PERF_USE_VMALLOC=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_SCSI=m +CONFIG_SCSI_MOD=m +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SOFT_WATCHDOG=m +# CONFIG_SWAP is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_UIDGID_CONVERTED=y +CONFIG_USB=m +CONFIG_USB_ADM5120_HCD=m +CONFIG_USB_ARCH_HAS_XHCI=y +CONFIG_USB_COMMON=m +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_HCD_PLATFORM is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_WATCHDOG_CORE=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files-3.18/arch/mips/adm5120/Kconfig new file mode 100644 index 0000000000..be35a8f72e --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/Kconfig @@ -0,0 +1,197 @@ +if ADM5120 + +menu "ADM5120 Board selection" + +config ADM5120_MACH_CAS_771 + bool "Cellvision CAS-771/771W support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_CELLVISION + default y + +config ADM5120_MACH_NFS_101 + bool "Cellvision NFS-101U/101WU support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_CELLVISION + default y + +config ADM5120_MACH_NP27G + bool "Compex NP27G support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_COMPEX + default y + +config ADM5120_MACH_NP28G + bool "Compex NP28G support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_COMPEX + default y + +config ADM5120_MACH_WP54 + bool "Compex WP54 family support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_COMPEX + default y + +config ADM5120_MACH_EB_214A + bool "EB-214A support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_GENERIC + default y + +config ADM5120_MACH_BR_6104K + bool "Edimax BR-6104K support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_OEM_EDIMAX + default y + +config ADM5120_MACH_BR_6104KP + bool "Edimax BR-6104KP support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_OEM_EDIMAX + default y + +config ADM5120_MACH_BR_61X4WG + bool "Edimax BR-6104WG/6114WG support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_EDIMAX + default y + +config ADM5120_MACH_EASY5120_RT + bool "Infineon EASY 5120-RT Reference Board support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_INFINEON + default y + +config ADM5120_MACH_EASY5120_WVOIP + bool "Infineon EASY 5120-WVoIP Reference Board support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_INFINEON + default y + +config ADM5120_MACH_EASY5120P_ATA + bool "Infineon EASY 5120P-ATA Reference Board support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_OEM_INFINEON + default y + +config ADM5120_MACH_EASY83000 + bool "Infineon EASY 83000 Reference Board support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_OEM_INFINEON + default y + +config ADM5120_MACH_RB_11X + bool "MikroTik RouterBOARD 111/112 support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_MIKROTIK + default y + +config ADM5120_MACH_RB_133 + bool "MikroTik RouterBOARD 133 support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_MIKROTIK + default y + +config ADM5120_MACH_RB_133C + bool "MikroTik RouterBOARD 133C support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_MIKROTIK + default y + +config ADM5120_MACH_RB_150 + bool "MikroTik RouterBOARD 150 support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_OEM_MIKROTIK + default y + +config ADM5120_MACH_RB_153 + bool "MikroTik RouterBOARD 153 support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_MIKROTIK + default y + +config ADM5120_MACH_RB_192 + bool "MikroTik RouterBOARD 192 support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_MIKROTIK + default y + +config ADM5120_MACH_PMUGW + bool "Motorola Powerline MU Gateway" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_MOTOROLA + default y + +config ADM5120_MACH_5GXI + bool "OSBRiDGE 5GXi/5XLi support" + depends on CPU_LITTLE_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_OSBRIDGE + default y + +config ADM5120_MACH_P_334WT + bool "ZyXEL Prestige 334WT" + depends on CPU_BIG_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_ZYXEL + default y + +config ADM5120_MACH_P_335 + bool "ZyXEL Prestige 335/335WT" + depends on CPU_BIG_ENDIAN + select ADM5120_SOC_BGA + select ADM5120_OEM_ZYXEL + default y + +endmenu + +config ADM5120_SOC_BGA + select HW_HAS_PCI + def_bool n + +config ADM5120_OEM_CELLVISION + def_bool n + +config ADM5120_OEM_COMPEX + def_bool n + +config ADM5120_OEM_EDIMAX + def_bool n + +config ADM5120_OEM_GENERIC + def_bool n + +config ADM5120_OEM_INFINEON + def_bool n + +config ADM5120_OEM_MIKROTIK + def_bool n + +config ADM5120_OEM_MOTOROLA + def_bool n + +config ADM5120_OEM_OSBRIDGE + def_bool n + +config ADM5120_OEM_ZYXEL + def_bool n + +config ARM_AMBA + def_bool y + +endif diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/Platform b/target/linux/adm5120/files-3.18/arch/mips/adm5120/Platform new file mode 100644 index 0000000000..0c9edf218b --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/Platform @@ -0,0 +1,19 @@ +# +# Infineon/ADMtek ADM5120 +# + +platform-$(CONFIG_ADM5120) += adm5120/common/ + +platform-$(CONFIG_ADM5120_OEM_CELLVISION) += adm5120/cellvision/ +platform-$(CONFIG_ADM5120_OEM_COMPEX) += adm5120/compex/ +platform-$(CONFIG_ADM5120_OEM_EDIMAX) += adm5120/edimax/ +platform-$(CONFIG_ADM5120_OEM_GENERIC) += adm5120/generic/ +platform-$(CONFIG_ADM5120_OEM_INFINEON) += adm5120/infineon/ +platform-$(CONFIG_ADM5120_OEM_MIKROTIK) += adm5120/mikrotik/ +platform-$(CONFIG_ADM5120_OEM_MOTOROLA) += adm5120/motorola/ +platform-$(CONFIG_ADM5120_OEM_OSBRIDGE) += adm5120/osbridge/ +platform-$(CONFIG_ADM5120_OEM_ZYXEL) += adm5120/zyxel/ + +cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120 +libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/ +load-$(CONFIG_ADM5120) += 0xffffffff80001000 diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/Makefile new file mode 100644 index 0000000000..a949fc9f61 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/Makefile @@ -0,0 +1,4 @@ +obj-y += cellvision.o + +obj-$(CONFIG_ADM5120_MACH_CAS_771) += cas-771.o +obj-$(CONFIG_ADM5120_MACH_NFS_101) += nfs-101.o diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cas-771.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cas-771.c new file mode 100644 index 0000000000..5033e02469 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cas-771.c @@ -0,0 +1,37 @@ +/* + * Cellvision/SparkLAN CAS-771/771W support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "cellvision.h" + +static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), + PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1), + PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2) +}; + +static struct gpio_led cas771_gpio_leds[] __initdata = { + GPIO_LED_STD(ADM5120_GPIO_PIN0, "cam_flash", NULL), + /* GPIO PIN3 is the reset */ + GPIO_LED_STD(ADM5120_GPIO_PIN6, "access", NULL), + GPIO_LED_STD(ADM5120_GPIO_P0L1, "status", NULL), + GPIO_LED_STD(ADM5120_GPIO_P0L2, "diag", NULL), +}; + +static void __init cas771_setup(void) +{ + cas7xx_setup(); + adm5120_add_device_gpio_leds(ARRAY_SIZE(cas771_gpio_leds), + cas771_gpio_leds); + adm5120_pci_set_irq_map(ARRAY_SIZE(cas771_pci_irqs), cas771_pci_irqs); +} + +MIPS_MACHINE(MACH_ADM5120_CAS771, "CAS-771", "Cellvision CAS-771/771W", + cas771_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.c new file mode 100644 index 0000000000..a7cedf03bc --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.c @@ -0,0 +1,147 @@ +/* + * Cellvision/SparkLAN boards + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "cellvision.h" + +#include + +#define CELLVISION_GPIO_FLASH_A20 ADM5120_GPIO_PIN5 +#define CELLVISION_GPIO_DEV_MASK (1 << CELLVISION_GPIO_FLASH_A20) + +#define CELLVISION_CONFIG_OFFSET 0x8000 +#define CELLVISION_CONFIG_SIZE 0x1000 + +static struct mtd_partition cas6xx_partitions[] = { + { + .name = "admboot", + .offset = 0, + .size = 32*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 32*1024, + } , { + .name = "nvfs1", + .offset = MTDPART_OFS_APPEND, + .size = 64*1024, + } , { + .name = "nvfs2", + .offset = MTDPART_OFS_APPEND, + .size = 64*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct mtd_partition cas7xx_partitions[] = { + { + .name = "admboot", + .offset = 0, + .size = 32*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 32*1024, + } , { + .name = "nvfs", + .offset = MTDPART_OFS_APPEND, + .size = 128*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static void switch_bank_gpio5(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(CELLVISION_GPIO_FLASH_A20, 0); + break; + case 1: + gpio_set_value(CELLVISION_GPIO_FLASH_A20, 1); + break; + } +} + +static void __init cellvision_flash_setup(void) +{ + /* setup flash A20 line */ + gpio_request(CELLVISION_GPIO_FLASH_A20, NULL); + gpio_direction_output(CELLVISION_GPIO_FLASH_A20, 0); + + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + adm5120_add_device_flash(0); +} + +void __init cellvision_mac_setup(void) +{ + u8 mac_base[6]; + int err; + + err = admboot_get_mac_base(CELLVISION_CONFIG_OFFSET, + CELLVISION_CONFIG_SIZE, mac_base); + + if ((err) || !is_valid_ether_addr(mac_base)) + random_ether_addr(mac_base); + + adm5120_setup_eth_macs(mac_base); +} + +void __init cas6xx_flash_setup(void) +{ + adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions); + adm5120_flash0_data.parts = cas6xx_partitions; + + cellvision_flash_setup(); +} + +void __init cas7xx_flash_setup(void) +{ + adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions); + adm5120_flash0_data.parts = cas7xx_partitions; + + cellvision_flash_setup(); +} + +void __init cas6xx_setup(void) +{ + cas6xx_flash_setup(); + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + adm5120_add_device_switch(1, NULL); +} + +MIPS_MACHINE(MACH_ADM5120_CAS630, "CAS-630", "Cellvision CAS-630/630W", + cas6xx_setup); +MIPS_MACHINE(MACH_ADM5120_CAS670, "CAS-670", "Cellvision CAS-670/670W", + cas6xx_setup); + +void __init cas7xx_setup(void) +{ + cas7xx_flash_setup(); + cellvision_mac_setup(); + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + adm5120_add_device_switch(1, NULL); +} + +MIPS_MACHINE(MACH_ADM5120_CAS700, "CAS-700", "Cellvision CAS-700/700W", + cas7xx_setup); +MIPS_MACHINE(MACH_ADM5120_CAS790, "CAS-790", "Cellvision CAS-790", + cas7xx_setup); +MIPS_MACHINE(MACH_ADM5120_CAS861, "CAS-861", "Cellvision CAS-861/861W", + cas7xx_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.h new file mode 100644 index 0000000000..2b55ebf761 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/cellvision.h @@ -0,0 +1,28 @@ +/* + * Cellvision/SparkLAN boards + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include + +extern void cellvision_mac_setup(void) __init; + +extern void cas6xx_flash_setup(void) __init; +extern void cas7xx_flash_setup(void) __init; +extern void cas6xx_setup(void) __init; +extern void cas7xx_setup(void) __init; diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/nfs-101.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/nfs-101.c new file mode 100644 index 0000000000..7d214c0909 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/cellvision/nfs-101.c @@ -0,0 +1,47 @@ +/* + * Cellvision/SparkLAN NFS-101U/WU support + * + * Copyright (C) 2007-2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "cellvision.h" + +static struct adm5120_pci_irq nfs101_pci_irqs[] __initdata = { + /* miniPCI slot */ + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), + + /* ALi USB controller */ + PCIIRQ(3, 0, 2, ADM5120_IRQ_PCI2), + PCIIRQ(3, 3, 1, ADM5120_IRQ_PCI1), + + /* NEC USB controller */ + PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1), + PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI2), + PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2), +}; + +static u8 nfs101_vlans[6] __initdata = { + /* FIXME: not tested */ + 0x5f, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static void __init nfs101_setup(void) +{ + cas6xx_flash_setup(); + cellvision_mac_setup(); + + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + adm5120_add_device_switch(1, nfs101_vlans); + + adm5120_pci_set_irq_map(ARRAY_SIZE(nfs101_pci_irqs), + nfs101_pci_irqs); +} + +MIPS_MACHINE(MACH_ADM5120_NFS101U, "NFS-101U", "Cellvision NFS-101U/101WU", + nfs101_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/Makefile new file mode 100644 index 0000000000..8d302c5931 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Infineon/ADMtek ADM5120 SoC specific parts of the kernel +# + +obj-y := adm5120.o setup.o prom.o irq.o memory.o clock.o \ + gpio.o platform.o + +obj-$(CONFIG_EARLY_PRINTK) += early-printk.o diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/adm5120.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/adm5120.c new file mode 100644 index 0000000000..28388342c6 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/adm5120.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include + +#include +#include +#include + +unsigned int adm5120_product_code; +unsigned int adm5120_revision; +unsigned int adm5120_package; +unsigned int adm5120_nand_boot; +unsigned long adm5120_speed; + +/* + * CPU settings detection + */ +#define CODE_GET_PC(c) ((c) & CODE_PC_MASK) +#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK) +#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK) +#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK) +#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0) + +void adm5120_ndelay(u32 ns) +{ + u32 t; + + SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT); + SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); + + t = (ns+640) / 640; + t &= TIMER_PERIOD_MASK; + SW_WRITE_REG(SWITCH_REG_TIMER, t | TIMER_TE); + + /* wait until the timer expires */ + do { + t = SW_READ_REG(SWITCH_REG_TIMER_INT); + } while ((t & TIMER_INT_TOS) == 0); + + /* leave the timer disabled */ + SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT); + SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); +} + +void __init adm5120_soc_init(void) +{ + u32 code; + u32 clks; + + code = SW_READ_REG(SWITCH_REG_CODE); + + adm5120_product_code = CODE_GET_PC(code); + adm5120_revision = CODE_GET_REV(code); + adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ? + ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP; + adm5120_nand_boot = CODE_GET_NAB(code); + + clks = CODE_GET_CLKS(code); + adm5120_speed = ADM5120_SPEED_175; + if (clks & 1) + adm5120_speed += 25000000; + if (clks & 2) + adm5120_speed += 50000000; +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/clock.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/clock.c new file mode 100644 index 0000000000..52ae64c419 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/clock.c @@ -0,0 +1,65 @@ +/* + * ADM5120 minimal CLK API implementation + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was based on the CLK API implementation in: + * arch/mips/tx4938/toshiba_rbtx4938/setup.c + * Copyright (C) 2000-2001 Toshiba Corporation + * 2003-2005 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +struct clk { + unsigned long rate; +}; + +static struct clk uart_clk = { + .rate = ADM5120_UART_CLOCK +}; + +struct clk *clk_get(struct device *dev, const char *id) +{ + const char *name = dev_name(dev); + + if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1")) + return &uart_clk; + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/early-printk.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/early-printk.c new file mode 100644 index 0000000000..d900712639 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/early-printk.c @@ -0,0 +1,31 @@ +/* + * ADM5120 specific early printk support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include + +#include +#include +#include + +#define UART_READ(r) \ + __raw_readl((void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))) +#define UART_WRITE(r, v) \ + __raw_writel((v), (void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))) + +void __init prom_putchar(char ch) +{ + while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0) + ; + UART_WRITE(UART_REG_DATA, ch); + while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0) + ; +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/gpio.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/gpio.c new file mode 100644 index 0000000000..461ea15e82 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/gpio.c @@ -0,0 +1,328 @@ +/* + * ADM5120 generic GPIO API support via GPIOLIB + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#define GPIO_REG(r) (void __iomem *)(KSEG1ADDR(ADM5120_SWITCH_BASE) + r) + +struct gpio1_desc { + void __iomem *reg; /* register address */ + u8 iv_shift; /* shift amount for input bit */ + u8 mode_shift; /* shift amount for mode bits */ +}; + +#define GPIO1_DESC(p, l) { \ + .reg = GPIO_REG(SWITCH_REG_PORT0_LED + ((p) * 4)), \ + .iv_shift = LED0_IV_SHIFT + (l), \ + .mode_shift = (l) * 4 \ + } + +static struct gpio1_desc gpio1_table[15] = { + GPIO1_DESC(0, 0), GPIO1_DESC(0, 1), GPIO1_DESC(0, 2), + GPIO1_DESC(1, 0), GPIO1_DESC(1, 1), GPIO1_DESC(1, 2), + GPIO1_DESC(2, 0), GPIO1_DESC(2, 1), GPIO1_DESC(2, 2), + GPIO1_DESC(3, 0), GPIO1_DESC(3, 1), GPIO1_DESC(3, 2), + GPIO1_DESC(4, 0), GPIO1_DESC(4, 1), GPIO1_DESC(4, 2) +}; + +static u32 gpio_conf2; + +int adm5120_gpio_to_irq(unsigned gpio) +{ + int ret; + + switch (gpio) { + case ADM5120_GPIO_PIN2: + ret = ADM5120_IRQ_GPIO2; + break; + case ADM5120_GPIO_PIN4: + ret = ADM5120_IRQ_GPIO4; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} +EXPORT_SYMBOL(adm5120_gpio_to_irq); + +int adm5120_irq_to_gpio(unsigned irq) +{ + int ret; + + switch (irq) { + case ADM5120_IRQ_GPIO2: + ret = ADM5120_GPIO_PIN2; + break; + case ADM5120_IRQ_GPIO4: + ret = ADM5120_GPIO_PIN4; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} +EXPORT_SYMBOL(adm5120_irq_to_gpio); + +/* + * Helpers for GPIO lines in GPIO_CONF0 register + */ +#define PIN_IM(p) ((1 << GPIO_CONF0_IM_SHIFT) << p) +#define PIN_IV(p) ((1 << GPIO_CONF0_IV_SHIFT) << p) +#define PIN_OE(p) ((1 << GPIO_CONF0_OE_SHIFT) << p) +#define PIN_OV(p) ((1 << GPIO_CONF0_OV_SHIFT) << p) + +int __adm5120_gpio0_get_value(unsigned offset) +{ + void __iomem **reg; + u32 t; + + reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); + + t = __raw_readl(reg); + if ((t & PIN_IM(offset)) != 0) + t &= PIN_IV(offset); + else + t &= PIN_OV(offset); + + return (t) ? 1 : 0; +} +EXPORT_SYMBOL(__adm5120_gpio0_get_value); + +void __adm5120_gpio0_set_value(unsigned offset, int value) +{ + void __iomem **reg; + u32 t; + + reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); + + t = __raw_readl(reg); + if (value == 0) + t &= ~(PIN_OV(offset)); + else + t |= PIN_OV(offset); + + __raw_writel(t, reg); +} +EXPORT_SYMBOL(__adm5120_gpio0_set_value); + +static int adm5120_gpio0_get_value(struct gpio_chip *chip, unsigned offset) +{ + return __adm5120_gpio0_get_value(offset); +} + +static void adm5120_gpio0_set_value(struct gpio_chip *chip, + unsigned offset, int value) +{ + __adm5120_gpio0_set_value(offset, value); +} + +static int adm5120_gpio0_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + void __iomem **reg; + u32 t; + + reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); + + t = __raw_readl(reg); + t &= ~(PIN_OE(offset)); + t |= PIN_IM(offset); + __raw_writel(t, reg); + + return 0; +} + +static int adm5120_gpio0_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + void __iomem **reg; + u32 t; + + reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); + + t = __raw_readl(reg); + t &= ~(PIN_IM(offset) | PIN_OV(offset)); + t |= PIN_OE(offset); + + if (value) + t |= PIN_OV(offset); + + __raw_writel(t, reg); + + return 0; +} + +static struct gpio_chip adm5120_gpio0_chip = { + .label = "adm5120 gpio0", + .get = adm5120_gpio0_get_value, + .set = adm5120_gpio0_set_value, + .direction_input = adm5120_gpio0_direction_input, + .direction_output = adm5120_gpio0_direction_output, + .base = ADM5120_GPIO_PIN0, + .ngpio = ADM5120_GPIO_PIN7 - ADM5120_GPIO_PIN0 + 1, +}; + +int __adm5120_gpio1_get_value(unsigned offset) +{ + void __iomem **reg; + u32 t, m; + + reg = gpio1_table[offset].reg; + + t = __raw_readl(reg); + m = (t >> gpio1_table[offset].mode_shift) & LED_MODE_MASK; + if (m == LED_MODE_INPUT) + return (t >> gpio1_table[offset].iv_shift) & 1; + + if (m == LED_MODE_OUT_LOW) + return 0; + + return 1; +} +EXPORT_SYMBOL(__adm5120_gpio1_get_value); + +void __adm5120_gpio1_set_value(unsigned offset, int value) +{ + void __iomem **reg; + u32 t, s; + + reg = gpio1_table[offset].reg; + s = gpio1_table[offset].mode_shift; + + t = __raw_readl(reg); + t &= ~(LED_MODE_MASK << s); + + switch (value) { + case ADM5120_GPIO_LOW: + t |= (LED_MODE_OUT_LOW << s); + break; + case ADM5120_GPIO_FLASH: + case ADM5120_GPIO_LINK: + case ADM5120_GPIO_SPEED: + case ADM5120_GPIO_DUPLEX: + case ADM5120_GPIO_ACT: + case ADM5120_GPIO_COLL: + case ADM5120_GPIO_LINK_ACT: + case ADM5120_GPIO_DUPLEX_COLL: + case ADM5120_GPIO_10M_ACT: + case ADM5120_GPIO_100M_ACT: + t |= ((value & LED_MODE_MASK) << s); + break; + default: + t |= (LED_MODE_OUT_HIGH << s); + break; + } + + __raw_writel(t, reg); +} +EXPORT_SYMBOL(__adm5120_gpio1_set_value); + +static int adm5120_gpio1_get_value(struct gpio_chip *chip, unsigned offset) +{ + return __adm5120_gpio1_get_value(offset); +} + +static void adm5120_gpio1_set_value(struct gpio_chip *chip, + unsigned offset, int value) +{ + __adm5120_gpio1_set_value(offset, value); +} + +static int adm5120_gpio1_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + void __iomem **reg; + u32 t; + + reg = gpio1_table[offset].reg; + t = __raw_readl(reg); + t &= ~(LED_MODE_MASK << gpio1_table[offset].mode_shift); + __raw_writel(t, reg); + + return 0; +} + +static int adm5120_gpio1_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + __adm5120_gpio1_set_value(offset, value); + return 0; +} + +static struct gpio_chip adm5120_gpio1_chip = { + .label = "adm5120 gpio1", + .get = adm5120_gpio1_get_value, + .set = adm5120_gpio1_set_value, + .direction_input = adm5120_gpio1_direction_input, + .direction_output = adm5120_gpio1_direction_output, + .base = ADM5120_GPIO_P0L0, + .ngpio = ADM5120_GPIO_P4L2 - ADM5120_GPIO_P0L0 + 1, +}; + +void __init adm5120_gpio_csx0_enable(void) +{ + gpio_conf2 |= GPIO_CONF2_CSX0; + SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2); + + gpio_request(ADM5120_GPIO_PIN1, "CSX0"); +} + +void __init adm5120_gpio_csx1_enable(void) +{ + gpio_conf2 |= GPIO_CONF2_CSX1; + SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2); + + gpio_request(ADM5120_GPIO_PIN3, "CSX1"); +} + +void __init adm5120_gpio_ew_enable(void) +{ + gpio_conf2 |= GPIO_CONF2_EW; + SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2); + + gpio_request(ADM5120_GPIO_PIN0, "EW"); +} + +void __init adm5120_gpio_init(void) +{ + int err; + + SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2); + + if (adm5120_package_pqfp()) + adm5120_gpio0_chip.ngpio = 4; + + err = gpiochip_add(&adm5120_gpio0_chip); + if (err) + panic("cannot add ADM5120 GPIO0 chip, error=%d", err); + + err = gpiochip_add(&adm5120_gpio1_chip); + if (err) + panic("cannot add ADM5120 GPIO1 chip, error=%d", err); + +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/irq.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/irq.c new file mode 100644 index 0000000000..a26e65176e --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/irq.c @@ -0,0 +1,171 @@ +/* + * ADM5120 specific interrupt handlers + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +static void adm5120_intc_irq_unmask(struct irq_data *d); +static void adm5120_intc_irq_mask(struct irq_data *d); +static int adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type); + +static inline void intc_write_reg(unsigned int reg, u32 val) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE); + + __raw_writel(val, base + reg); +} + +static inline u32 intc_read_reg(unsigned int reg) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE); + + return __raw_readl(base + reg); +} + +static struct irq_chip adm5120_intc_irq_chip = { + .name = "INTC", + .irq_unmask = adm5120_intc_irq_unmask, + .irq_mask = adm5120_intc_irq_mask, + .irq_mask_ack = adm5120_intc_irq_mask, + .irq_set_type = adm5120_intc_irq_set_type +}; + +static struct irqaction adm5120_intc_irq_action = { + .handler = no_action, + .name = "cascade [INTC]" +}; + +static void adm5120_intc_irq_unmask(struct irq_data *d) +{ + intc_write_reg(INTC_REG_IRQ_ENABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE)); +} + +static void adm5120_intc_irq_mask(struct irq_data *d) +{ + intc_write_reg(INTC_REG_IRQ_DISABLE, 1 << (d->irq - ADM5120_INTC_IRQ_BASE)); +} + +static int adm5120_intc_irq_set_type(struct irq_data *d, unsigned int flow_type) +{ + unsigned int irq = d->irq; + unsigned int sense; + unsigned long mode; + int err = 0; + + sense = flow_type & (IRQ_TYPE_SENSE_MASK); + switch (sense) { + case IRQ_TYPE_NONE: + case IRQ_TYPE_LEVEL_HIGH: + break; + case IRQ_TYPE_LEVEL_LOW: + switch (irq) { + case ADM5120_IRQ_GPIO2: + case ADM5120_IRQ_GPIO4: + break; + default: + err = -EINVAL; + break; + } + break; + default: + err = -EINVAL; + break; + } + + if (err) + return err; + + switch (irq) { + case ADM5120_IRQ_GPIO2: + case ADM5120_IRQ_GPIO4: + mode = intc_read_reg(INTC_REG_INT_MODE); + if (sense == IRQ_TYPE_LEVEL_LOW) + mode |= (1 << (irq - ADM5120_INTC_IRQ_BASE)); + else + mode &= ~(1 << (irq - ADM5120_INTC_IRQ_BASE)); + + intc_write_reg(INTC_REG_INT_MODE, mode); + break; + } + + return 0; +} + +static void adm5120_intc_irq_dispatch(void) +{ + unsigned long status; + int irq; + + status = intc_read_reg(INTC_REG_IRQ_STATUS) & INTC_INT_ALL; + if (status) { + irq = ADM5120_INTC_IRQ_BASE + fls(status) - 1; + do_IRQ(irq); + } else + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(ADM5120_IRQ_COUNTER); + else if (pending & STATUSF_IP2) + adm5120_intc_irq_dispatch(); + else + spurious_interrupt(); +} + +#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED) +static void __init adm5120_intc_irq_init(void) +{ + int i; + + /* disable all interrupts */ + intc_write_reg(INTC_REG_IRQ_DISABLE, INTC_INT_ALL); + + /* setup all interrupts to generate IRQ instead of FIQ */ + intc_write_reg(INTC_REG_INT_MODE, 0); + + /* set active level for all external interrupts to HIGH */ + intc_write_reg(INTC_REG_INT_LEVEL, 0); + + /* disable usage of the TEST_SOURCE register */ + intc_write_reg(INTC_REG_IRQ_SOURCE_SELECT, 0); + + for (i = ADM5120_INTC_IRQ_BASE; + i <= ADM5120_INTC_IRQ_BASE + INTC_IRQ_LAST; + i++) { + irq_set_chip_and_handler(i, &adm5120_intc_irq_chip, + handle_level_irq); + } + + setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + adm5120_intc_irq_init(); +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/memory.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/memory.c new file mode 100644 index 0000000000..d07266fa38 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/memory.c @@ -0,0 +1,149 @@ +/* + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#ifdef DEBUG +# define mem_dbg(f, a...) printk(KERN_INFO "mem_detect: " f, ## a) +#else +# define mem_dbg(f, a...) +#endif + +unsigned long adm5120_memsize; + +#define MEM_READL(a) __raw_readl((void __iomem *)(a)) +#define MEM_WRITEL(a, v) __raw_writel((v), (void __iomem *)(a)) + +static int __init mem_check_pattern(u8 *addr, unsigned long offs) +{ + u32 *p1 = (u32 *)addr; + u32 *p2 = (u32 *)(addr+offs); + u32 t, u, v; + + /* save original value */ + t = MEM_READL(p1); + + u = MEM_READL(p2); + if (t != u) + return 0; + + v = 0x55555555; + if (u == v) + v = 0xAAAAAAAA; + + mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1); + + MEM_WRITEL(p1, v); + adm5120_ndelay(1000); + u = MEM_READL(p2); + + mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u); + + /* restore original value */ + MEM_WRITEL(p1, t); + + return (v == u); +} + +static void __init adm5120_detect_memsize(void) +{ + u32 memctrl; + u32 size, maxsize; + u8 *p; + + memctrl = SW_READ_REG(SWITCH_REG_MEMCTRL); + switch (memctrl & MEMCTRL_SDRS_MASK) { + case MEMCTRL_SDRS_4M: + maxsize = 4 << 20; + break; + case MEMCTRL_SDRS_8M: + maxsize = 8 << 20; + break; + case MEMCTRL_SDRS_16M: + maxsize = 16 << 20; + break; + default: + maxsize = 64 << 20; + break; + } + + mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20); + + /* detect size of the 1st SDRAM bank */ + p = (u8 *)KSEG1ADDR(0); + for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) { + if (mem_check_pattern(p, size)) { + /* mirrored address */ + mem_dbg("mirrored data found at offset 0x%08X\n", size); + break; + } + } + + mem_dbg("chip size in 1st bank is %uMB\n", size >> 20); + adm5120_memsize = size; + + if (size != maxsize) + /* 2nd bank is not supported */ + goto out; + + if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0) + /* 2nd bank is disabled */ + goto out; + + /* + * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip + * are missing. + */ + mem_dbg("check presence of 2nd bank\n"); + + p = (u8 *)KSEG1ADDR(maxsize+size-4); + if (mem_check_pattern(p, 0)) + adm5120_memsize += size; + + if (maxsize != size) { + /* adjusting MECTRL register */ + memctrl &= ~(MEMCTRL_SDRS_MASK); + switch (size>>20) { + case 4: + memctrl |= MEMCTRL_SDRS_4M; + break; + case 8: + memctrl |= MEMCTRL_SDRS_8M; + break; + case 16: + memctrl |= MEMCTRL_SDRS_16M; + break; + default: + memctrl |= MEMCTRL_SDRS_64M; + break; + } + SW_WRITE_REG(SWITCH_REG_MEMCTRL, memctrl); + } + +out: + mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 , + size>>20); +} + +void __init adm5120_mem_init(void) +{ + adm5120_detect_memsize(); + add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM); +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/platform.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/platform.c new file mode 100644 index 0000000000..bdbfbcbae5 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/platform.c @@ -0,0 +1,375 @@ +/* + * ADM5120 generic platform devices + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#if 1 +/* + * TODO:remove global adm5120_eth* variables when the switch driver will be + * converted into a real platform driver + */ +unsigned int adm5120_eth_num_ports = 6; +EXPORT_SYMBOL_GPL(adm5120_eth_num_ports); + +unsigned char adm5120_eth_macs[6][6] = { + {'\00', 'A', 'D', 'M', '\x51', '\x20' }, + {'\00', 'A', 'D', 'M', '\x51', '\x21' }, + {'\00', 'A', 'D', 'M', '\x51', '\x22' }, + {'\00', 'A', 'D', 'M', '\x51', '\x23' }, + {'\00', 'A', 'D', 'M', '\x51', '\x24' }, + {'\00', 'A', 'D', 'M', '\x51', '\x25' } +}; +EXPORT_SYMBOL_GPL(adm5120_eth_macs); + +unsigned char adm5120_eth_vlans[6] = { + 0x41, 0x42, 0x44, 0x48, 0x50, 0x60 +}; +EXPORT_SYMBOL_GPL(adm5120_eth_vlans); +#endif + +void __init adm5120_setup_eth_macs(u8 *mac_base) +{ + u32 t; + int i, j; + + t = ((u32) mac_base[3] << 16) | ((u32) mac_base[4] << 8) + | ((u32) mac_base[5]); + + for (i = 0; i < ARRAY_SIZE(adm5120_eth_macs); i++) { + for (j = 0; j < 3; j++) + adm5120_eth_macs[i][j] = mac_base[j]; + + adm5120_eth_macs[i][3] = (t >> 16) & 0xff; + adm5120_eth_macs[i][4] = (t >> 8) & 0xff; + adm5120_eth_macs[i][5] = t & 0xff; + + t++; + } +} + +/* + * Built-in ethernet switch + */ +struct resource adm5120_switch_resources[] = { + [0] = { + .start = ADM5120_SWITCH_BASE, + .end = ADM5120_SWITCH_BASE+ADM5120_SWITCH_SIZE-1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ADM5120_IRQ_SWITCH, + .end = ADM5120_IRQ_SWITCH, + .flags = IORESOURCE_IRQ, + }, +}; + +struct adm5120_switch_platform_data adm5120_switch_data; +struct platform_device adm5120_switch_device = { + .name = "adm5120-switch", + .id = -1, + .num_resources = ARRAY_SIZE(adm5120_switch_resources), + .resource = adm5120_switch_resources, + .dev.platform_data = &adm5120_switch_data, +}; + +void __init adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) +{ + if (num_ports > 0) + adm5120_eth_num_ports = num_ports; + + if (vlan_map) + memcpy(adm5120_eth_vlans, vlan_map, sizeof(adm5120_eth_vlans)); + + platform_device_register(&adm5120_switch_device); +} + +/* + * USB Host Controller + */ +struct resource adm5120_hcd_resources[] = { + [0] = { + .start = ADM5120_USBC_BASE, + .end = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ADM5120_IRQ_USBC, + .end = ADM5120_IRQ_USBC, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 adm5120_hcd_dma_mask = DMA_BIT_MASK(24); +struct platform_device adm5120_hcd_device = { + .name = "adm5120-hcd", + .id = -1, + .num_resources = ARRAY_SIZE(adm5120_hcd_resources), + .resource = adm5120_hcd_resources, + .dev = { + .dma_mask = &adm5120_hcd_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(24), + } +}; + +void __init adm5120_add_device_usb(void) +{ + platform_device_register(&adm5120_hcd_device); +} + +/* + * NOR flash devices + */ +struct adm5120_flash_platform_data adm5120_flash0_data; +struct platform_device adm5120_flash0_device = { + .name = "adm5120-flash", + .id = 0, + .dev.platform_data = &adm5120_flash0_data, +}; + +struct adm5120_flash_platform_data adm5120_flash1_data; +struct platform_device adm5120_flash1_device = { + .name = "adm5120-flash", + .id = 1, + .dev.platform_data = &adm5120_flash1_data, +}; + +void __init adm5120_add_device_flash(unsigned id) +{ + struct platform_device *pdev; + + switch (id) { + case 0: + pdev = &adm5120_flash0_device; + break; + case 1: + pdev = &adm5120_flash1_device; + break; + default: + pdev = NULL; + break; + } + + if (pdev) + platform_device_register(pdev); +} + +/* + * built-in UARTs + */ +static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base, + unsigned int mctrl) +{ +} + +struct amba_pl010_data adm5120_uart0_data = { + .set_mctrl = adm5120_uart_set_mctrl +}; + +struct amba_device adm5120_uart0_device = { + .dev = { + .init_name = "apb:uart0", + .platform_data = &adm5120_uart0_data, + }, + .res = { + .start = ADM5120_UART0_BASE, + .end = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { ADM5120_IRQ_UART0, 0 }, + .periphid = 0x0041010, +}; + +struct amba_pl010_data adm5120_uart1_data = { + .set_mctrl = adm5120_uart_set_mctrl +}; + +struct amba_device adm5120_uart1_device = { + .dev = { + .init_name = "apb:uart1", + .platform_data = &adm5120_uart1_data, + }, + .res = { + .start = ADM5120_UART1_BASE, + .end = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { ADM5120_IRQ_UART1, 0 }, + .periphid = 0x0041010, +}; + +void __init adm5120_add_device_uart(unsigned id) +{ + struct amba_device *dev; + + switch (id) { + case 0: + dev = &adm5120_uart0_device; + break; + case 1: + dev = &adm5120_uart1_device; + break; + default: + dev = NULL; + break; + } + + if (dev) + amba_device_register(dev, &iomem_resource); +} + +/* + * GPIO buttons + */ +void __init adm5120_register_gpio_buttons(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons) +{ + struct platform_device *pdev; + struct gpio_keys_platform_data pdata; + struct gpio_keys_button *p; + int err; + + p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + pdev = platform_device_alloc("gpio-keys-polled", id); + if (!pdev) + goto err_free_buttons; + + memset(&pdata, 0, sizeof(pdata)); + pdata.poll_interval = poll_interval; + pdata.nbuttons = nbuttons; + pdata.buttons = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_buttons: + kfree(p); +} + +/* + * GPIO LEDS + */ +struct gpio_led_platform_data adm5120_gpio_leds_data; +struct platform_device adm5120_gpio_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &adm5120_gpio_leds_data, +}; + +void __init adm5120_add_device_gpio_leds(unsigned num_leds, + struct gpio_led *leds) +{ + struct gpio_led *p; + + p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, leds, num_leds * sizeof(*p)); + adm5120_gpio_leds_data.num_leds = num_leds; + adm5120_gpio_leds_data.leds = p; + + platform_device_register(&adm5120_gpio_leds_device); +} + +/* + * NAND flash + */ +struct resource adm5120_nand_resources[] = { + [0] = { + .start = ADM5120_NAND_BASE, + .end = ADM5120_NAND_BASE + ADM5120_NAND_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static int adm5120_nand_ready(struct mtd_info *mtd) +{ + return ((adm5120_nand_get_status() & ADM5120_NAND_STATUS_READY) != 0); +} + +static void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + if (ctrl & NAND_CTRL_CHANGE) { + adm5120_nand_set_cle(ctrl & NAND_CLE); + adm5120_nand_set_ale(ctrl & NAND_ALE); + adm5120_nand_set_cen(ctrl & NAND_NCE); + } + + if (cmd != NAND_CMD_NONE) + NAND_WRITE_REG(NAND_REG_DATA, cmd); +} + +void __init adm5120_add_device_nand(struct platform_nand_data *pdata) +{ + struct platform_device *pdev; + int err; + + pdev = platform_device_alloc("gen_nand", -1); + if (!pdev) + goto err_out; + + err = platform_device_add_resources(pdev, adm5120_nand_resources, + ARRAY_SIZE(adm5120_nand_resources)); + if (err) + goto err_put; + + err = platform_device_add_data(pdev, pdata, sizeof(*pdata)); + if (err) + goto err_put; + + pdata = pdev->dev.platform_data; + pdata->ctrl.dev_ready = adm5120_nand_ready; + pdata->ctrl.cmd_ctrl = adm5120_nand_cmd_ctrl; + + err = platform_device_add(pdev); + if (err) + goto err_put; + + return; + +err_put: + platform_device_put(pdev); +err_out: + return; +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/prom.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/prom.c new file mode 100644 index 0000000000..5c52ea27e2 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/prom.c @@ -0,0 +1,264 @@ +/* + * ADM5120 specific prom routines + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include +#include +#include + +unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC; + +struct board_desc { + unsigned long mach_type; + char *name; +}; + +#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)} +static struct board_desc common_boards[] __initdata = { + /* Cellvision/SparkLAN boards */ + DEFBOARD("CAS-630", MACH_ADM5120_CAS630), + DEFBOARD("CAS-670", MACH_ADM5120_CAS670), + DEFBOARD("CAS-700", MACH_ADM5120_CAS700), + DEFBOARD("CAS-771", MACH_ADM5120_CAS771), + DEFBOARD("CAS-790", MACH_ADM5120_CAS790), + DEFBOARD("CAS-861", MACH_ADM5120_CAS861), + DEFBOARD("NFS-101U", MACH_ADM5120_NFS101U), + /* Compex boards */ + DEFBOARD("WP54G-WRT", MACH_ADM5120_WP54G_WRT), + /* Edimax boards */ + DEFBOARD("BR-6104K", MACH_ADM5120_BR6104K), + DEFBOARD("BR-6104KP", MACH_ADM5120_BR6104KP), + DEFBOARD("BR-6104WG", MACH_ADM5120_BR61X4WG), + DEFBOARD("BR-6114WG", MACH_ADM5120_BR61X4WG), + /* Infineon boards */ + DEFBOARD("EASY 5120P-ATA", MACH_ADM5120_EASY5120PATA), + DEFBOARD("EASY 5120-RT", MACH_ADM5120_EASY5120RT), + DEFBOARD("EASY 5120-WVoIP", MACH_ADM5120_EASY5120WVOIP), + DEFBOARD("EASY 83000", MACH_ADM5120_EASY83000), + /* Mikrotik RouterBOARDs */ + DEFBOARD("111", MACH_ADM5120_RB_11X), + DEFBOARD("112", MACH_ADM5120_RB_11X), + DEFBOARD("133", MACH_ADM5120_RB_133), + DEFBOARD("133C", MACH_ADM5120_RB_133C), + DEFBOARD("133C3", MACH_ADM5120_RB_133C), + DEFBOARD("150", MACH_ADM5120_RB_153), /* it's intentional */ + DEFBOARD("153", MACH_ADM5120_RB_153), + DEFBOARD("192", MACH_ADM5120_RB_192), + DEFBOARD("miniROUTER", MACH_ADM5120_RB_150), + /* OSBRiDGE boards */ + DEFBOARD("OSBRiDGE 5GXi", MACH_ADM5120_5GXI), + /* Motorola boards */ + DEFBOARD("Powerline MU Gateway", MACH_ADM5120_PMUGW), + /* Generic EB-214A */ + DEFBOARD("ADM5120", MACH_ADM5120_EB_214A), +}; + +static unsigned long __init find_machtype_byname(char *name) +{ + unsigned long ret; + int i; + + ret = MACH_ADM5120_GENERIC; + if (name == NULL) + goto out; + + if (*name == '\0') + goto out; + + for (i = 0; i < ARRAY_SIZE(common_boards); i++) { + if (strcmp(common_boards[i].name, name) == 0) { + ret = common_boards[i].mach_type; + break; + } + } + +out: + return ret; +} + +static unsigned long __init detect_machtype_routerboot(void) +{ + char *name; + + name = routerboot_get_boardname(); + return find_machtype_byname(name); +} + +static unsigned long __init detect_machtype_generic(void) +{ + char *name; + + name = generic_prom_getenv("board_name"); + return find_machtype_byname(name); +} + +unsigned long __init detect_machtype_cfe(void) +{ + char *name; + + name = cfe_getenv("BOARD_NAME"); + return find_machtype_byname(name); +} + +static struct { + unsigned long mach_type; + u16 vendor_id; + u16 board_id; +} zynos_boards[] __initdata = { +#define ZYNOS_BOARD(vi, bi, mt) \ + {.vendor_id = (vi), .board_id = (bi), .mach_type = (mt)} + +#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt) +#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt) +#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt) + ZYXEL_BOARD(ZYNOS_BOARD_HS100, MACH_ADM5120_HS100), + ZYXEL_BOARD(ZYNOS_BOARD_P334U, MACH_ADM5120_P334U), + ZYXEL_BOARD(ZYNOS_BOARD_P334W, MACH_ADM5120_P334W), + ZYXEL_BOARD(ZYNOS_BOARD_P334WH, MACH_ADM5120_P334WH), + ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD), + ZYXEL_BOARD(ZYNOS_BOARD_P334WT, MACH_ADM5120_P334WT), + ZYXEL_BOARD(ZYNOS_BOARD_P334WT_ALT, MACH_ADM5120_P334WT), + ZYXEL_BOARD(ZYNOS_BOARD_P335, MACH_ADM5120_P335), + ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS), + ZYXEL_BOARD(ZYNOS_BOARD_P335U, MACH_ADM5120_P335U) +}; + +static unsigned long __init detect_machtype_bootbase(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(zynos_boards); i++) { + if (zynos_boards[i].vendor_id == bootbase_info.vendor_id && + zynos_boards[i].board_id == bootbase_info.board_id) { + return zynos_boards[i].mach_type; + break; + } + } + + printk(KERN_WARNING "Unknown ZyXEL model (%u)\n", + bootbase_info.board_id); + return MACH_ADM5120_GENERIC; +} + +static struct { + unsigned long mach_type; + u16 vid; + u16 did; + u16 svid; + u16 sdid; +} mylo_boards[] __initdata = { +#define MYLO_BOARD(v, d, sv, sd, mt) \ + {.vid = (v), .did = (d), .svid = (sv), .sdid = (sd), .mach_type = (mt)} +#define COMPEX_BOARD(d, mt) \ + MYLO_BOARD(VENID_COMPEX, (d), VENID_COMPEX, (d), (mt)) + + COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G), + COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G), + COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS), + COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54), + COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C), + COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54), + COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WP54), + COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WP54), +}; + +static unsigned long __init detect_machtype_myloader(void) +{ + unsigned long ret; + int i; + + ret = MACH_ADM5120_GENERIC; + for (i = 0; i < ARRAY_SIZE(mylo_boards); i++) { + if (mylo_boards[i].vid == myloader_info.vid && + mylo_boards[i].did == myloader_info.did && + mylo_boards[i].svid == myloader_info.svid && + mylo_boards[i].sdid == myloader_info.sdid) { + ret = mylo_boards[i].mach_type; + break; + } + } + + return ret; +} + +static void __init prom_detect_machtype(void) +{ + if (bootbase_present()) { + adm5120_prom_type = ADM5120_PROM_BOOTBASE; + mips_machtype = detect_machtype_bootbase(); + return; + } + + if (cfe_present()) { + adm5120_prom_type = ADM5120_PROM_CFE; + mips_machtype = detect_machtype_cfe(); + return; + } + + if (myloader_present()) { + adm5120_prom_type = ADM5120_PROM_MYLOADER; + mips_machtype = detect_machtype_myloader(); + return; + } + + if (routerboot_present()) { + adm5120_prom_type = ADM5120_PROM_ROUTERBOOT; + mips_machtype = detect_machtype_routerboot(); + return; + } + + if (generic_prom_present()) { + adm5120_prom_type = ADM5120_PROM_GENERIC; + mips_machtype = detect_machtype_generic(); + return; + } + + mips_machtype = MACH_ADM5120_GENERIC; +} + +#ifdef CONFIG_IMAGE_CMDLINE_HACK +extern char __image_cmdline[]; + +static void __init prom_init_cmdline(void) +{ + char *cmd; + + /* init command line, register a default kernel command line */ + cmd = __image_cmdline; + if (strlen(cmd) > 0) + strlcpy(arcs_cmdline, cmd, sizeof(arcs_cmdline)); + +} +#else +static inline void prom_init_cmdline(void) {} +#endif /* CONFIG_IMAGE_CMDLINE_HACK */ + +void __init prom_init(void) +{ + prom_detect_machtype(); + prom_init_cmdline(); +} + +void __init prom_free_prom_memory(void) +{ + /* We do not have to prom memory to free */ +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/setup.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/setup.c new file mode 100644 index 0000000000..c0410afdf2 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/setup.c @@ -0,0 +1,129 @@ +/* + * ADM5120 specific setup + * + * Copyright (C) 2007-2009 Gabor Juhos + * + * This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel + * done by Jeroen Vreeken + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * + * Jeroen's code was based on the Linux 2.4.xx source codes found in various + * tarballs released by Edimax for it's ADM5120 based devices + * Copyright (C) ADMtek Incorporated + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define ADM5120_SYS_TYPE_LEN 64 + +unsigned char adm5120_sys_type[ADM5120_SYS_TYPE_LEN]; +void (*adm5120_board_reset)(void); + +static char *prom_names[ADM5120_PROM_LAST+1] __initdata = { + [ADM5120_PROM_GENERIC] = "Generic", + [ADM5120_PROM_CFE] = "CFE", + [ADM5120_PROM_UBOOT] = "U-Boot", + [ADM5120_PROM_MYLOADER] = "MyLoader", + [ADM5120_PROM_ROUTERBOOT] = "RouterBOOT", + [ADM5120_PROM_BOOTBASE] = "Bootbase" +}; + +static void __init adm5120_report(void) +{ + printk(KERN_INFO "SoC : %s\n", adm5120_sys_type); + printk(KERN_INFO "Bootdev : %s flash\n", + adm5120_nand_boot ? "NAND" : "NOR"); + printk(KERN_INFO "Prom : %s\n", prom_names[adm5120_prom_type]); +} + +const char *get_system_type(void) +{ + return adm5120_sys_type; +} + +static void adm5120_restart(char *command) +{ + /* TODO: stop switch before reset */ + + if (adm5120_board_reset) + adm5120_board_reset(); + + SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1); +} + +static void adm5120_halt(void) +{ + local_irq_disable(); + + while (1) { + if (cpu_wait) + cpu_wait(); + } +} + +void __init plat_time_init(void) +{ + mips_hpt_frequency = adm5120_speed / 2; +} + +void __init plat_mem_setup(void) +{ + adm5120_soc_init(); + adm5120_mem_init(); + + sprintf(adm5120_sys_type, "ADM%04X%s rev %u, running at %lu.%03lu MHz", + adm5120_product_code, + adm5120_package_bga() ? "" : "P", + adm5120_revision, + (adm5120_speed / 1000000), (adm5120_speed / 1000) % 1000); + + adm5120_report(); + + _machine_restart = adm5120_restart; + _machine_halt = adm5120_halt; + pm_power_off = adm5120_halt; + + set_io_port_base(KSEG1); +} + +static int __init adm5120_board_setup(void) +{ + adm5120_gpio_init(); + + mips_machine_setup(); + + return 0; +} +arch_initcall(adm5120_board_setup); + +static void __init adm5120_generic_board_setup(void) +{ + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + + adm5120_add_device_flash(0); + adm5120_add_device_switch(6, NULL); +} + +MIPS_MACHINE(MACH_ADM5120_GENERIC, "Generic", "Generic ADM5120 board", + adm5120_generic_board_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/Makefile new file mode 100644 index 0000000000..8c66c171e7 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/Makefile @@ -0,0 +1,5 @@ +obj-y += compex.o + +obj-$(CONFIG_ADM5120_MACH_NP27G) += np27g.o +obj-$(CONFIG_ADM5120_MACH_NP28G) += np28g.o +obj-$(CONFIG_ADM5120_MACH_WP54) += wp54.o diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.c new file mode 100644 index 0000000000..814acfb0cf --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.c @@ -0,0 +1,60 @@ +/* + * Compex boards + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "compex.h" + +#include + +static void switch_bank_gpio5(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(ADM5120_GPIO_PIN5, 0); + break; + case 1: + gpio_set_value(ADM5120_GPIO_PIN5, 1); + break; + } +} + +void __init compex_mac_setup(void) +{ + if (myloader_present()) { + int i; + + for (i = 0; i < 6; i++) { + if (is_valid_ether_addr(myloader_info.macs[i])) + memcpy(adm5120_eth_macs[i], + myloader_info.macs[i], ETH_ALEN); + else + random_ether_addr(adm5120_eth_macs[i]); + } + } else { + u8 mac[ETH_ALEN]; + + random_ether_addr(mac); + adm5120_setup_eth_macs(mac); + } +} + +void __init compex_generic_setup(void) +{ + gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + adm5120_add_device_flash(0); + + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + + compex_mac_setup(); +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.h new file mode 100644 index 0000000000..124e676971 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/compex.h @@ -0,0 +1,23 @@ +/* + * Compex boards + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include + +extern void compex_generic_setup(void) __init; diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np27g.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np27g.c new file mode 100644 index 0000000000..82da46d1c7 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np27g.c @@ -0,0 +1,28 @@ +/* + * Compex NP27G board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "compex.h" + +static u8 np27g_vlans[6] __initdata = { + /* FIXME: untested */ + 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 +}; + +static void __init np27g_setup(void) +{ + compex_generic_setup(); + adm5120_add_device_switch(5, np27g_vlans); + adm5120_add_device_usb(); + + /* TODO: add PCI IRQ map */ +} + +MIPS_MACHINE(MACH_ADM5120_NP27G, "NP27G", "Compex NetPassage 27G", np27g_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np28g.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np28g.c new file mode 100644 index 0000000000..a541439998 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/np28g.c @@ -0,0 +1,63 @@ +/* + * Compex NP28G board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "compex.h" + +static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), + PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0), + PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1), + PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2) +}; + +static struct gpio_led np28g_gpio_leds[] __initdata = { + GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag", NULL), + GPIO_LED_INV(ADM5120_GPIO_PIN3, "power", NULL), + GPIO_LED_INV(ADM5120_GPIO_PIN6, "wan_cond", NULL), + GPIO_LED_INV(ADM5120_GPIO_PIN7, "wifi", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L2, "usb1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L2, "usb2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L2, "usb3", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L2, "usb4", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan", NULL), +}; + +static u8 np28g_vlans[6] __initdata = { + 0x50, 0x42, 0x44, 0x48, 0x00, 0x00 +}; + +static void np28g_reset(void) +{ + gpio_set_value(ADM5120_GPIO_PIN4, 0); +} + +static void __init np28g_setup(void) +{ + compex_generic_setup(); + + /* setup reset line */ + gpio_request(ADM5120_GPIO_PIN4, NULL); + gpio_direction_output(ADM5120_GPIO_PIN4, 1); + adm5120_board_reset = np28g_reset; + + adm5120_add_device_switch(4, np28g_vlans); + adm5120_add_device_usb(); + + adm5120_add_device_gpio_leds(ARRAY_SIZE(np28g_gpio_leds), + np28g_gpio_leds); + + adm5120_pci_set_irq_map(ARRAY_SIZE(np28g_pci_irqs), np28g_pci_irqs); +} + +MIPS_MACHINE(MACH_ADM5120_NP28G, "NP28G", "Compex NetPassage 28G", np28g_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/wp54.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/wp54.c new file mode 100644 index 0000000000..8aa35c555a --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/compex/wp54.c @@ -0,0 +1,95 @@ +/* + * Compex WP54 board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "compex.h" + +#define WP54_KEYS_POLL_INTERVAL 20 +#define WP54_KEYS_DEBOUNCE_INTERVAL (3 * WP54_KEYS_POLL_INTERVAL) + +static struct mtd_partition wp54g_wrt_partitions[] = { + { + .name = "cfe", + .offset = 0, + .size = 0x050000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "trx", + .offset = MTDPART_OFS_APPEND, + .size = 0x3A0000, + } , { + .name = "nvram", + .offset = MTDPART_OFS_APPEND, + .size = 0x010000, + } +}; + +static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), +}; + +static struct gpio_keys_button wp54_gpio_buttons[] __initdata = { + { + .desc = "reset_button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WP54_KEYS_DEBOUNCE_INTERVAL, + .gpio = ADM5120_GPIO_PIN4, + } +}; + +static struct gpio_led wp54_gpio_leds[] __initdata = { + GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag", NULL), + GPIO_LED_INV(ADM5120_GPIO_PIN6, "wlan", NULL), + GPIO_LED_INV(ADM5120_GPIO_PIN7, "wan", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2", NULL), +}; + +static u8 wp54_vlans[6] __initdata = { + 0x41, 0x42, 0x00, 0x00, 0x00, 0x00 +}; + +static void wp54_reset(void) +{ + gpio_set_value(ADM5120_GPIO_PIN3, 0); +} + +static void __init wp54_setup(void) +{ + compex_generic_setup(); + + /* setup reset line */ + gpio_request(ADM5120_GPIO_PIN3, NULL); + gpio_direction_output(ADM5120_GPIO_PIN3, 1); + adm5120_board_reset = wp54_reset; + + adm5120_add_device_switch(2, wp54_vlans); + adm5120_register_gpio_buttons(-1, WP54_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wp54_gpio_buttons), + wp54_gpio_buttons); + adm5120_add_device_gpio_leds(ARRAY_SIZE(wp54_gpio_leds), + wp54_gpio_leds); + + adm5120_pci_set_irq_map(ARRAY_SIZE(wp54_pci_irqs), wp54_pci_irqs); +} + +MIPS_MACHINE(MACH_ADM5120_WP54, "WP54", "Compex WP54 family", wp54_setup); + +static void __init wp54_wrt_setup(void) +{ + adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions); + adm5120_flash0_data.parts = wp54g_wrt_partitions; + + wp54_setup(); +} + +MIPS_MACHINE(MACH_ADM5120_WP54G_WRT, "WP54G-WRT", "Compex WP54G-WRT", + wp54_wrt_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/Makefile new file mode 100644 index 0000000000..1286ed4c1e --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/Makefile @@ -0,0 +1,5 @@ +obj-y := br-61xx.o + +obj-$(CONFIG_ADM5120_MACH_BR_6104K) += br-6104k.o +obj-$(CONFIG_ADM5120_MACH_BR_6104KP) += br-6104kp.o +obj-$(CONFIG_ADM5120_MACH_BR_61X4WG) += br-61x4wg.o diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104k.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104k.c new file mode 100644 index 0000000000..8b2b445506 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104k.c @@ -0,0 +1,36 @@ +/* + * Edimax BR-6104K board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "br-61xx.h" + +static struct gpio_led br6104k_gpio_leds[] __initdata = { + GPIO_LED_STD(ADM5120_GPIO_PIN0, "power", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL), +}; + +static void __init br6104k_setup(void) +{ + br61xx_generic_setup(); + adm5120_add_device_gpio_leds(ARRAY_SIZE(br6104k_gpio_leds), + br6104k_gpio_leds); +} + +MIPS_MACHINE(MACH_ADM5120_BR6104K, "BR-6104K", "Edimax BR-6104K", + br6104k_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104kp.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104kp.c new file mode 100644 index 0000000000..034575d6b2 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-6104kp.c @@ -0,0 +1,39 @@ +/* + * Edimax BR-6104KP board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "br-61xx.h" + +static struct gpio_led br6104kp_gpio_leds[] __initdata = { + GPIO_LED_STD(ADM5120_GPIO_PIN0, "power", NULL), + GPIO_LED_INV(ADM5120_GPIO_PIN3, "usb1", NULL), + GPIO_LED_INV(ADM5120_GPIO_PIN1, "usb2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL), +}; + +static void __init br6104kp_setup(void) +{ + br61xx_generic_setup(); + adm5120_add_device_gpio_leds(ARRAY_SIZE(br6104kp_gpio_leds), + br6104kp_gpio_leds); + adm5120_add_device_usb(); +} + +MIPS_MACHINE(MACH_ADM5120_BR6104KP, "BR-6104KP", "Edimax BR-6104KP", + br6104kp_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61x4wg.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61x4wg.c new file mode 100644 index 0000000000..5d57507101 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61x4wg.c @@ -0,0 +1,43 @@ +/* + * Edimax BR-6104Wg/6114WG board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "br-61xx.h" + +static struct adm5120_pci_irq br61x4wg_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), +}; + +static struct gpio_led br61x4wg_gpio_leds[] __initdata = { + GPIO_LED_STD(ADM5120_GPIO_PIN0, "power", NULL), + GPIO_LED_STD(ADM5120_GPIO_PIN5, "wlan", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL), +}; + +static void __init br61x4wg_setup(void) +{ + br61xx_generic_setup(); + adm5120_add_device_gpio_leds(ARRAY_SIZE(br61x4wg_gpio_leds), + br61x4wg_gpio_leds); + adm5120_pci_set_irq_map(ARRAY_SIZE(br61x4wg_pci_irqs), + br61x4wg_pci_irqs); +} + +MIPS_MACHINE(MACH_ADM5120_BR61X4WG, "BR-6104WG", "Edimax BR-6104WG/6114WG", + br61x4wg_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.c new file mode 100644 index 0000000000..62a1cee384 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.c @@ -0,0 +1,84 @@ +/* + * Edimax BR-61xx support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "br-61xx.h" + +#include + +#define BR61XX_CONFIG_OFFSET 0x8000 +#define BR61XX_CONFIG_SIZE 0x1000 + +#define BR61XX_KEYS_POLL_INTERVAL 20 +#define BR61XX_KEYS_DEBOUNCE_INTERVAL (3 * BR61XX_KEYS_POLL_INTERVAL) + +static struct mtd_partition br61xx_partitions[] = { + { + .name = "admboot", + .offset = 0, + .size = 32*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 32*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct gpio_keys_button br61xx_gpio_buttons[] __initdata = { + { + .desc = "reset_button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = BR61XX_KEYS_DEBOUNCE_INTERVAL, + .gpio = ADM5120_GPIO_PIN2, + } +}; + +static u8 br61xx_vlans[6] __initdata = { + 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 +}; + +static void __init br61xx_mac_setup(void) +{ + u8 mac_base[6]; + int err; + + err = admboot_get_mac_base(BR61XX_CONFIG_OFFSET, + BR61XX_CONFIG_SIZE, mac_base); + + if ((err) || !is_valid_ether_addr(mac_base)) + random_ether_addr(mac_base); + + adm5120_setup_eth_macs(mac_base); +} + +void __init br61xx_generic_setup(void) +{ + + adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions); + adm5120_flash0_data.parts = br61xx_partitions; + adm5120_add_device_flash(0); + + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + + adm5120_add_device_switch(5, br61xx_vlans); + + adm5120_register_gpio_buttons(-1, BR61XX_KEYS_POLL_INTERVAL, + ARRAY_SIZE(br61xx_gpio_buttons), + br61xx_gpio_buttons); + + br61xx_mac_setup(); +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.h new file mode 100644 index 0000000000..c4a9eced56 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/edimax/br-61xx.h @@ -0,0 +1,23 @@ +/* + * Edimax BR-61xx board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include + +extern void __init br61xx_generic_setup(void) __init; diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/Makefile new file mode 100644 index 0000000000..0c032e3a52 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ADM5120_MACH_EB_214A) += eb-214a.o diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/eb-214a.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/eb-214a.c new file mode 100644 index 0000000000..cf491a1efc --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/generic/eb-214a.c @@ -0,0 +1,120 @@ +/* + * EB-214A board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * Copyright (C) 2010 Cezary Jackiewicz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + + +#define EB214A_CONFIG_OFFSET 0x4000 + +#define EB214A_KEYS_POLL_INTERVAL 20 +#define EB214A_KEYS_DEBOUNCE_INTERVAL (3 * EB214A_KEYS_POLL_INTERVAL) + +static struct mtd_partition eb214a_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 32*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 32*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct adm5120_pci_irq eb214a_pci_irqs[] __initdata = { + PCIIRQ(4, 0, 1, ADM5120_IRQ_PCI0), + PCIIRQ(4, 1, 2, ADM5120_IRQ_PCI0), + PCIIRQ(4, 2, 3, ADM5120_IRQ_PCI0), +}; + +static struct gpio_led eb214a_gpio_leds[] __initdata = { + GPIO_LED_INV(ADM5120_GPIO_PIN7, "power", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L0, "usb1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L1, "usb2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L2, "usb3", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L0, "usb4", NULL), +}; + +static struct gpio_keys_button eb214a_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = EB214A_KEYS_DEBOUNCE_INTERVAL, + .gpio = ADM5120_GPIO_PIN1, + } +}; + +static u8 eb214a_vlans[6] __initdata = { + 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 +}; + +static void __init eb214a_mac_setup(void) +{ + u8 mac_base[6]; + u8 *cfg; + int i; + + cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + EB214A_CONFIG_OFFSET); + for (i = 0; i < 6; i++) + mac_base[i] = cfg[i]; + + if (!is_valid_ether_addr(mac_base)) + random_ether_addr(mac_base); + + adm5120_setup_eth_macs(mac_base); +} + +static void __init eb214a_setup(void) +{ + adm5120_flash0_data.nr_parts = ARRAY_SIZE(eb214a_partitions); + adm5120_flash0_data.parts = eb214a_partitions; + adm5120_add_device_flash(0); + + adm5120_add_device_uart(0); + /* adm5120_add_device_uart(1); */ + + adm5120_add_device_switch(5, eb214a_vlans); + + eb214a_mac_setup(); + + adm5120_register_gpio_buttons(-1, EB214A_KEYS_POLL_INTERVAL, + ARRAY_SIZE(eb214a_gpio_buttons), + eb214a_gpio_buttons); + + adm5120_add_device_gpio_leds(ARRAY_SIZE(eb214a_gpio_leds), + eb214a_gpio_leds); + + adm5120_pci_set_irq_map(ARRAY_SIZE(eb214a_pci_irqs), + eb214a_pci_irqs); + /* adm5120_add_device_usb(); */ +} + +MIPS_MACHINE(MACH_ADM5120_EB_214A, "EB-214A", "Generic EB-214A", eb214a_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/Makefile new file mode 100644 index 0000000000..49453cba9a --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/Makefile @@ -0,0 +1,6 @@ +obj-y += infineon.o + +obj-$(CONFIG_ADM5120_MACH_EASY5120_RT) += easy5120-rt.o +obj-$(CONFIG_ADM5120_MACH_EASY5120_WVOIP) += easy5120-wvoip.o +obj-$(CONFIG_ADM5120_MACH_EASY5120P_ATA) += easy5120p-ata.o +obj-$(CONFIG_ADM5120_MACH_EASY83000) += easy83000.o diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-rt.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-rt.c new file mode 100644 index 0000000000..31eaee7721 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-rt.c @@ -0,0 +1,48 @@ +/* + * Infineon EASY 5120-RT Reference Board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "infineon.h" + +static struct gpio_led easy5120_rt_gpio_leds[] __initdata = { + GPIO_LED_INV(ADM5120_GPIO_PIN6, "user", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan0_led1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan0_led2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan1_led1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan1_led2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2_led1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan2_led2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_led1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_led2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan", NULL), +}; + +static struct adm5120_pci_irq easy5120_rt_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), +}; + +static u8 easy5120_rt_vlans[6] __initdata = { + 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 +}; + +static void __init easy5120_rt_setup(void) +{ + easy_setup_bga(); + + adm5120_add_device_switch(5, easy5120_rt_vlans); + adm5120_add_device_usb(); + adm5120_add_device_gpio_leds(ARRAY_SIZE(easy5120_rt_gpio_leds), + easy5120_rt_gpio_leds); + adm5120_pci_set_irq_map(ARRAY_SIZE(easy5120_rt_pci_irqs), + easy5120_rt_pci_irqs); +} + +MIPS_MACHINE(MACH_ADM5120_EASY5120RT, "EASY5120-RT", + "Infineon EASY 5120-RT Reference Board", easy5120_rt_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-wvoip.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-wvoip.c new file mode 100644 index 0000000000..0bf404cc26 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120-wvoip.c @@ -0,0 +1,24 @@ +/* + * Infineon EASY 5120-WVoIP Reference Board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "infineon.h" + +static void __init easy5120wvoip_setup(void) +{ + easy_setup_bga(); + adm5120_add_device_switch(6, NULL); + + /* TODO: add VINETIC2 device */ + /* TODO: setup PCI IRQ map */ +} + +MIPS_MACHINE(MACH_ADM5120_EASY5120WVOIP, "EASY5120WVoIP", + "Infineon EASY 5120-WVoIP Reference Board", easy5120wvoip_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120p-ata.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120p-ata.c new file mode 100644 index 0000000000..fafe0238bd --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy5120p-ata.c @@ -0,0 +1,22 @@ +/* + * Infineon EASY 5120P-ATA Reference Board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "infineon.h" + +static void __init easy5120pata_setup(void) +{ + easy_setup_pqfp(); + + adm5120_add_device_switch(6, NULL); +} + +MIPS_MACHINE(MACH_ADM5120_EASY5120PATA, "EASY5120P-ATA", + "Infineon EASY 5120P-ATA Reference Board", easy5120pata_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy83000.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy83000.c new file mode 100644 index 0000000000..051b852749 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/easy83000.c @@ -0,0 +1,23 @@ +/* + * Infineon EASY 83000 Reference Board support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "infineon.h" + +static void __init easy83000_setup(void) +{ + easy_setup_pqfp(); + adm5120_add_device_switch(6, NULL); + + /* TODO: add VINAX device */ +} + +MIPS_MACHINE(MACH_ADM5120_EASY83000, "EASY8300", + "Infineon EASY 83000 Reference Board", easy83000_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.c new file mode 100644 index 0000000000..5c441da90e --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.c @@ -0,0 +1,108 @@ +/* + * Infineon Reference Boards + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "infineon.h" + +#include + +#define EASY_CONFIG_OFFSET 0x10000 +#define EASY_CONFIG_SIZE 0x1000 + +static struct mtd_partition easy_partitions[] = { + { + .name = "admboot", + .offset = 0, + .size = 64*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "boardcfg", + .offset = MTDPART_OFS_APPEND, + .size = 64*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static __init void easy_setup_mac(void) +{ + u8 mac_base[6]; + int err; + + err = admboot_get_mac_base(EASY_CONFIG_OFFSET, + EASY_CONFIG_SIZE, mac_base); + + if ((err) || !is_valid_ether_addr(mac_base)) + random_ether_addr(mac_base); + + adm5120_setup_eth_macs(mac_base); +} + +static void switch_bank_gpio3(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(ADM5120_GPIO_PIN3, 0); + break; + case 1: + gpio_set_value(ADM5120_GPIO_PIN3, 1); + break; + } +} + +void __init easy_setup_pqfp(void) +{ + /* setup flash A20 line */ + gpio_request(ADM5120_GPIO_PIN3, NULL); + gpio_direction_output(ADM5120_GPIO_PIN3, 0); + adm5120_flash0_data.switch_bank = switch_bank_gpio3; + + adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); + adm5120_flash0_data.parts = easy_partitions; + + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + + adm5120_add_device_flash(0); + + easy_setup_mac(); +} + +static void switch_bank_gpio5(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(ADM5120_GPIO_PIN5, 0); + break; + case 1: + gpio_set_value(ADM5120_GPIO_PIN5, 1); + break; + } +} + +void __init easy_setup_bga(void) +{ + /* setup flash A20 line */ + gpio_request(ADM5120_GPIO_PIN5, NULL); + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + + adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); + adm5120_flash0_data.parts = easy_partitions; + + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + + adm5120_add_device_flash(0); + + easy_setup_mac(); +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.h new file mode 100644 index 0000000000..a5f28b4fec --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/infineon/infineon.h @@ -0,0 +1,25 @@ +/* + * Infineon Reference Boards + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +extern void easy_setup_pqfp(void) __init; +extern void easy_setup_bga(void) __init; diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/Makefile new file mode 100644 index 0000000000..34ea0a3d88 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/Makefile @@ -0,0 +1,8 @@ +obj-y += rb-1xx.o + +obj-${CONFIG_ADM5120_MACH_RB_11X} += rb-11x.o +obj-${CONFIG_ADM5120_MACH_RB_133} += rb-133.o +obj-${CONFIG_ADM5120_MACH_RB_133C} += rb-133c.o +obj-${CONFIG_ADM5120_MACH_RB_150} += rb-150.o +obj-${CONFIG_ADM5120_MACH_RB_153} += rb-153.o +obj-${CONFIG_ADM5120_MACH_RB_192} += rb-192.o diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-11x.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-11x.c new file mode 100644 index 0000000000..fd768d8ef0 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-11x.c @@ -0,0 +1,35 @@ +/* + * Mikrotik RouterBOARD 111/112 support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "rb-1xx.h" + +static struct gpio_led rb11x_gpio_leds[] __initdata = { + GPIO_LED_STD(ADM5120_GPIO_PIN3, "user", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan_lnkact", NULL), +}; + +static u8 rb11x_vlans[6] __initdata = { + 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static void __init rb11x_setup(void) +{ + rb1xx_generic_setup(); + rb1xx_add_device_nand(); + + adm5120_add_device_switch(1, rb11x_vlans); + adm5120_add_device_gpio_leds(ARRAY_SIZE(rb11x_gpio_leds), + rb11x_gpio_leds); +} + +MIPS_MACHINE(MACH_ADM5120_RB_11X, "11x", "Mikrotik RouterBOARD 111/112", + rb11x_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133.c new file mode 100644 index 0000000000..23c57820c3 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133.c @@ -0,0 +1,40 @@ +/* + * Mikrotik RouterBOARD 133 support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "rb-1xx.h" + +static struct gpio_led rb133_gpio_leds[] __initdata = { + GPIO_LED_STD(ADM5120_GPIO_PIN6, "power", NULL), + GPIO_LED_STD(ADM5120_GPIO_PIN5, "user", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan2_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan3_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan3_lnkact", NULL), +}; + +static u8 rb133_vlans[6] __initdata = { + 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static void __init rb133_setup(void) +{ + rb1xx_generic_setup(); + rb1xx_add_device_nand(); + + adm5120_add_device_switch(3, rb133_vlans); + adm5120_add_device_gpio_leds(ARRAY_SIZE(rb133_gpio_leds), + rb133_gpio_leds); +} + +MIPS_MACHINE(MACH_ADM5120_RB_133, "133", "Mikrotik RouterBOARD 133", + rb133_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133c.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133c.c new file mode 100644 index 0000000000..25bab70c00 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-133c.c @@ -0,0 +1,36 @@ +/* + * Mikrotik RouterBOARD 133C support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "rb-1xx.h" + +static struct gpio_led rb133c_gpio_leds[] __initdata = { + GPIO_LED_STD(ADM5120_GPIO_PIN6, "power", NULL), + GPIO_LED_STD(ADM5120_GPIO_PIN5, "user", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact", NULL), +}; + +static u8 rb133c_vlans[6] __initdata = { + 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static void __init rb133c_setup(void) +{ + rb1xx_generic_setup(); + rb1xx_add_device_nand(); + + adm5120_add_device_switch(1, rb133c_vlans); + adm5120_add_device_gpio_leds(ARRAY_SIZE(rb133c_gpio_leds), + rb133c_gpio_leds); +} + +MIPS_MACHINE(MACH_ADM5120_RB_133C, "133C", "Mikrotik RouterBOARD 133C", + rb133c_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-150.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-150.c new file mode 100644 index 0000000000..96a8c1b87b --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-150.c @@ -0,0 +1,131 @@ +/* + * Mikrotik RouterBOARD 150 support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "rb-1xx.h" + +#define RB150_NAND_BASE 0x1FC80000 +#define RB150_NAND_SIZE 1 + +#define RB150_GPIO_NAND_READY ADM5120_GPIO_PIN0 +#define RB150_GPIO_NAND_NCE ADM5120_GPIO_PIN1 +#define RB150_GPIO_NAND_CLE ADM5120_GPIO_P2L2 +#define RB150_GPIO_NAND_ALE ADM5120_GPIO_P3L2 +#define RB150_GPIO_RESET_BUTTON ADM5120_GPIO_PIN1 /* FIXME */ + +#define RB150_NAND_DELAY 100 + +#define RB150_NAND_WRITE(v) \ + writeb((v), (void __iomem *)KSEG1ADDR(RB150_NAND_BASE)) + +static struct resource rb150_nand_resources[] __initdata = { + [0] = { + .start = RB150_NAND_BASE, + .end = RB150_NAND_BASE + RB150_NAND_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct gpio_led rb150_gpio_leds[] __initdata = { + GPIO_LED_STD(ADM5120_GPIO_P0L2, "user", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan1_led1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1_led2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan5_led1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan5_led2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan4_led1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan4_led2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_led1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_led2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan2_led1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan2_led2", NULL), +}; + +static u8 rb150_vlans[6] __initdata = { + 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static int rb150_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(RB150_GPIO_NAND_READY); +} + +static void rb150_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + if (ctrl & NAND_CTRL_CHANGE) { + gpio_set_value(RB150_GPIO_NAND_CLE, (ctrl & NAND_CLE) ? 1 : 0); + gpio_set_value(RB150_GPIO_NAND_ALE, (ctrl & NAND_ALE) ? 1 : 0); + gpio_set_value(RB150_GPIO_NAND_NCE, (ctrl & NAND_NCE) ? 0 : 1); + } + + udelay(RB150_NAND_DELAY); + + if (cmd != NAND_CMD_NONE) + RB150_NAND_WRITE(cmd); +} + +static void __init rb150_add_device_nand(void) +{ + struct platform_device *pdev; + int err; + + /* setup GPIO pins for NAND flash chip */ + gpio_request(RB150_GPIO_NAND_READY, "nand-ready"); + gpio_direction_input(RB150_GPIO_NAND_READY); + gpio_request(RB150_GPIO_NAND_NCE, "nand-nce"); + gpio_direction_output(RB150_GPIO_NAND_NCE, 1); + gpio_request(RB150_GPIO_NAND_CLE, "nand-cle"); + gpio_direction_output(RB150_GPIO_NAND_CLE, 0); + gpio_request(RB150_GPIO_NAND_ALE, "nand-ale"); + gpio_direction_output(RB150_GPIO_NAND_ALE, 0); + + pdev = platform_device_alloc("gen_nand", -1); + if (!pdev) + goto err_out; + + err = platform_device_add_resources(pdev, rb150_nand_resources, + ARRAY_SIZE(rb150_nand_resources)); + if (err) + goto err_put; + + + rb1xx_nand_data.ctrl.cmd_ctrl = rb150_nand_cmd_ctrl; + rb1xx_nand_data.ctrl.dev_ready = rb150_nand_dev_ready; + + err = platform_device_add_data(pdev, &rb1xx_nand_data, + sizeof(rb1xx_nand_data)); + if (err) + goto err_put; + + err = platform_device_add(pdev); + if (err) + goto err_put; + + return; + +err_put: + platform_device_put(pdev); +err_out: + return; +} + +static void __init rb150_setup(void) +{ + rb1xx_gpio_buttons[0].gpio = RB150_GPIO_RESET_BUTTON; + rb1xx_generic_setup(); + rb150_add_device_nand(); + + adm5120_add_device_gpio_leds(ARRAY_SIZE(rb150_gpio_leds), + rb150_gpio_leds); + adm5120_add_device_switch(5, rb150_vlans); +} + +MIPS_MACHINE(MACH_ADM5120_RB_150, "miniROUTER", "Mikrotik RouterBOARD 150", + rb150_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-153.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-153.c new file mode 100644 index 0000000000..8456684951 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-153.c @@ -0,0 +1,70 @@ +/* + * Mikrotik RouterBOARD 153 support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "rb-1xx.h" + +static struct resource rb153_cf_resources[] __initdata = { + { + .name = "cf_membase", + .start = ADM5120_EXTIO1_BASE, + .end = ADM5120_EXTIO1_BASE + ADM5120_EXTIO1_SIZE-1 , + .flags = IORESOURCE_MEM + }, { + .name = "cf_irq", + .start = ADM5120_IRQ_GPIO4, + .end = ADM5120_IRQ_GPIO4, + .flags = IORESOURCE_IRQ + } +}; + +static struct gpio_led rb153_gpio_leds[] __initdata = { + GPIO_LED_STD(ADM5120_GPIO_PIN5, "user", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan1_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan5_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan5_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan4_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan4_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L1, "lan2_speed", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L0, "lan2_lnkact", NULL), +}; + +static u8 rb153_vlans[6] __initdata = { + 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static void __init rb153_add_device_cf(void) +{ + /* enable CSX1:INTX1 on GPIO[3:4] for the CF slot */ + adm5120_gpio_csx1_enable(); + + /* enable the wait state pin GPIO[0] for external I/O control */ + adm5120_gpio_ew_enable(); + + platform_device_register_simple("pata-rb153-cf", -1, + rb153_cf_resources, ARRAY_SIZE(rb153_cf_resources)); +} + +static void __init rb153_setup(void) +{ + rb1xx_generic_setup(); + rb1xx_add_device_nand(); + rb153_add_device_cf(); + + adm5120_add_device_gpio_leds(ARRAY_SIZE(rb153_gpio_leds), + rb153_gpio_leds); + adm5120_add_device_switch(5, rb153_vlans); +} + +MIPS_MACHINE(MACH_ADM5120_RB_153, "150", "Mikrotik RouterBOARD 153", + rb153_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-192.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-192.c new file mode 100644 index 0000000000..9049421397 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-192.c @@ -0,0 +1,27 @@ +/* + * Mikrotik RouterBOARD 192 support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "rb-1xx.h" + +static u8 rb192_vlans[6] __initdata = { + 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static void __init rb192_setup(void) +{ + rb1xx_generic_setup(); + rb1xx_add_device_nand(); + + adm5120_add_device_switch(6, rb192_vlans); +} + +MIPS_MACHINE(MACH_ADM5120_RB_192, "192", "Mikrotik RouterBOARD 192", + rb192_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.c new file mode 100644 index 0000000000..8961115c7e --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.c @@ -0,0 +1,149 @@ +/* + * Mikrotik RouterBOARD 1xx series support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * NAND initialization code was based on a driver for Linux 2.6.19+ which + * was derived from the driver for Linux 2.4.xx published by Mikrotik for + * their RouterBoard 1xx and 5xx series boards. + * Copyright (C) 2007 David Goodenough + * Copyright (C) 2007 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "rb-1xx.h" + +#define RB1XX_NAND_CHIP_DELAY 25 + +#define RB1XX_KEYS_POLL_INTERVAL 20 +#define RB1XX_KEYS_DEBOUNCE_INTERVAL (3 * RB1XX_KEYS_POLL_INTERVAL) + +static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = { + PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0), + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1), + PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2) +}; + +static struct mtd_partition rb1xx_nor_parts[] = { + { + .name = "booter", + .offset = 0, + .size = 64*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct mtd_partition rb1xx_nand_parts[] = { + { + .name = "kernel", + .offset = 0, + .size = 4 * 1024 * 1024, + } , { + .name = "rootfs", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL + } +}; + +/* + * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader + * will not be able to find the kernel that we load. So set the oobinfo + * when creating the partitions + */ +static struct nand_ecclayout rb1xx_nand_ecclayout = { + .eccbytes = 6, + .eccpos = { 8, 9, 10, 13, 14, 15 }, + .oobavail = 9, + .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } +}; + +/*--------------------------------------------------------------------------*/ + +static int rb1xx_nand_fixup(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + + if (mtd->writesize == 512) + chip->ecc.layout = &rb1xx_nand_ecclayout; + + return 0; +} + +struct platform_nand_data rb1xx_nand_data __initdata = { + .chip = { + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(rb1xx_nand_parts), + .partitions = rb1xx_nand_parts, + .chip_delay = RB1XX_NAND_CHIP_DELAY, + .chip_fixup = rb1xx_nand_fixup, + }, +}; + +struct gpio_keys_button rb1xx_gpio_buttons[] __initdata = { + { + .desc = "reset_button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RB1XX_KEYS_DEBOUNCE_INTERVAL, + .gpio = ADM5120_GPIO_PIN7, + } +}; + +static void __init rb1xx_mac_setup(void) +{ + if (rb_hs.mac_base != NULL && is_valid_ether_addr(rb_hs.mac_base)) { + adm5120_setup_eth_macs(rb_hs.mac_base); + } else { + u8 mac[ETH_ALEN]; + + random_ether_addr(mac); + adm5120_setup_eth_macs(mac); + } +} + +void __init rb1xx_add_device_flash(void) +{ + /* setup data for flash0 device */ + adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts); + adm5120_flash0_data.parts = rb1xx_nor_parts; + adm5120_flash0_data.window_size = 128*1024; + + adm5120_add_device_flash(0); +} + +void __init rb1xx_add_device_nand(void) +{ + /* enable NAND flash interface */ + adm5120_nand_enable(); + + /* initialize NAND chip */ + adm5120_nand_set_spn(1); + adm5120_nand_set_wpn(0); + + adm5120_add_device_nand(&rb1xx_nand_data); +} + +void __init rb1xx_generic_setup(void) +{ + if (adm5120_package_bga()) + adm5120_pci_set_irq_map(ARRAY_SIZE(rb1xx_pci_irqs), + rb1xx_pci_irqs); + + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + + adm5120_register_gpio_buttons(-1, RB1XX_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rb1xx_gpio_buttons), + rb1xx_gpio_buttons); + + rb1xx_add_device_flash(); + rb1xx_mac_setup(); +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.h new file mode 100644 index 0000000000..05e68bd0a8 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/mikrotik/rb-1xx.h @@ -0,0 +1,33 @@ +/* + * Mikrotik RouterBOARD 1xx series support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include + +extern struct platform_nand_data rb1xx_nand_data __initdata; +extern struct gpio_keys_button rb1xx_gpio_buttons[] __initdata; + +extern void rb1xx_add_device_flash(void) __init; +extern void rb1xx_add_device_nand(void) __init; +extern void rb1xx_generic_setup(void) __init; diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/Makefile new file mode 100644 index 0000000000..239d5a0880 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ADM5120_MACH_PMUGW) += pmugw.o diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/pmugw.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/pmugw.c new file mode 100644 index 0000000000..369892fd13 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/motorola/pmugw.c @@ -0,0 +1,96 @@ +/* + * Motorola Powerline MU Gateway board + * + * Copyright (C) 2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include + +#define PMUGW_CONFIG_OFFSET 0x10000 +#define PMUGW_CONFIG_SIZE 0x1000 + +static struct mtd_partition pmugw_partitions[] = { + { + .name = "admboot", + .offset = 0, + .size = 64*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "boardcfg", + .offset = MTDPART_OFS_APPEND, + .size = 64*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static u8 pmugw_vlans[6] __initdata = { + 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 +}; + +static __init void pmugw_setup_mac(void) +{ + u8 mac_base[6]; + int err; + + err = admboot_get_mac_base(PMUGW_CONFIG_OFFSET, + PMUGW_CONFIG_SIZE, mac_base); + + if ((err) || !is_valid_ether_addr(mac_base)) + random_ether_addr(mac_base); + + adm5120_setup_eth_macs(mac_base); +} + +static void switch_bank_gpio5(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(ADM5120_GPIO_PIN5, 0); + break; + case 1: + gpio_set_value(ADM5120_GPIO_PIN5, 1); + break; + } +} + +void __init pmugw_setup(void) +{ + /* setup flash A20 line */ + gpio_request(ADM5120_GPIO_PIN5, NULL); + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + + adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions); + adm5120_flash0_data.parts = pmugw_partitions; + + adm5120_add_device_uart(1); /* ttyAM0 */ + adm5120_add_device_uart(0); /* ttyAM1 */ + + adm5120_add_device_flash(0); + + pmugw_setup_mac(); + adm5120_add_device_switch(5, pmugw_vlans); +} + +MIPS_MACHINE(MACH_ADM5120_PMUGW, "PMUGW", "Motorola Powerline MU Gateway", + pmugw_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/5gxi.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/5gxi.c new file mode 100644 index 0000000000..a5c2c3653e --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/5gxi.c @@ -0,0 +1,71 @@ +/* + * OSBRiDGE 5GXi/5XLi board support + * + * Copyright (C) 2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +static struct mtd_partition osbridge_5gxi_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 64*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "boardcfg", + .offset = 64*1024, + .size = 64*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct gpio_led osbridge_5gxi_gpio_leds[] __initdata = { + GPIO_LED_INV(ADM5120_GPIO_PIN6, "5gxi:green:user", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "5gxi:yellow:lan", NULL), +}; + +static struct adm5120_pci_irq osbridge_5gxi_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), +}; + +static u8 osbridge_5gxi_vlans[6] __initdata = { + 0x41, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static void __init osbridge_5gxi_setup(void) +{ + adm5120_flash0_data.nr_parts = ARRAY_SIZE(osbridge_5gxi_partitions); + adm5120_flash0_data.parts = osbridge_5gxi_partitions; + + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + + adm5120_add_device_flash(0); + + adm5120_add_device_switch(1, osbridge_5gxi_vlans); + adm5120_add_device_gpio_leds(ARRAY_SIZE(osbridge_5gxi_gpio_leds), + osbridge_5gxi_gpio_leds); + adm5120_pci_set_irq_map(ARRAY_SIZE(osbridge_5gxi_pci_irqs), + osbridge_5gxi_pci_irqs); +} + +MIPS_MACHINE(MACH_ADM5120_5GXI, "5GXi", "OSBRiDGE 5GXi/5XLi board", + osbridge_5gxi_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/Makefile new file mode 100644 index 0000000000..34946c5e58 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/osbridge/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ADM5120_MACH_5GXI) += 5gxi.o diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/Makefile new file mode 100644 index 0000000000..650be40779 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel +# + +lib-y += admboot.o +lib-y += bootbase.o +lib-y += cfe.o +lib-y += generic.o +lib-y += myloader.o +lib-y += routerboot.o diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/admboot.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/admboot.c new file mode 100644 index 0000000000..b655390c16 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/admboot.c @@ -0,0 +1,55 @@ +/* + * ADMBoot specific prom routines + * + * Copyright (C) 2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include "prom_read.h" + +#define ADMBOOT_MAGIC_MAC_BASE 0x636D676D /* 'mgmc' */ +#define ADMBOOT_MAGIC_MAC_BASE_BR6104XX 0x31305348 /* 'HS01' */ + +int __init admboot_get_mac_base(u32 offset, u32 len, u8 *mac) +{ + u8 *cfg; + int i; + + cfg = (u8 *) KSEG1ADDR(ADM5120_SRAM0_BASE + offset); + for (i = 0; i < len; i += 4) { + u32 magic; + + magic = prom_read_le32(cfg + i); + if (magic == ADMBOOT_MAGIC_MAC_BASE) { + int j; + + for (j = 0; j < 6; j++) + mac[j] = cfg[i + 4 + j]; + + return 0; + } + if (magic == ADMBOOT_MAGIC_MAC_BASE_BR6104XX) { + int j; + + for (j = 0; j < 6; j++) + mac[j] = cfg[i + 7 + j]; + + return 0; + } + } + + return -ENXIO; +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/bootbase.c new file mode 100644 index 0000000000..063281e3f7 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/bootbase.c @@ -0,0 +1,119 @@ +/* + * ZyXEL's Bootbase specific prom routines + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include "prom_read.h" + +#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90) +#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000) +#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE) +#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024)) + +static int bootbase_found; +static struct zynos_board_info *board_info; + +struct bootbase_info bootbase_info; + +static inline int bootbase_dbgarea_present(u8 *data) +{ + u32 t; + + t = prom_read_be32(data+5); + if (t != ZYNOS_MAGIC_DBGAREA1) + return 0; + + t = prom_read_be32(data+9); + if (t != ZYNOS_MAGIC_DBGAREA2) + return 0; + + return 1; +} + +static inline u32 bootbase_get_bootext_addr(void) +{ + return prom_read_be32(&board_info->bootext_addr); +} + +static inline void bootbase_get_mac(u8 *mac) +{ + int i; + + for (i = 0; i < 6; i++) + mac[i] = board_info->mac[i]; +} + +static inline u16 bootbase_get_vendor_id(void) +{ +#define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0) + unsigned char vendor[ZYNOS_NAME_LEN]; + int i; + + for (i = 0; i < ZYNOS_NAME_LEN; i++) + vendor[i] = board_info->vendor[i]; + + if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL) + return ZYNOS_VENDOR_ID_ZYXEL; + + if CHECK_VENDOR(ZYNOS_VENDOR_DLINK) + return ZYNOS_VENDOR_ID_DLINK; + + if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT) + return ZYNOS_VENDOR_ID_LUCENT; + + if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR) + return ZYNOS_VENDOR_ID_NETGEAR; + + return ZYNOS_VENDOR_ID_OTHER; +} + +static inline u16 bootbase_get_board_id(void) +{ + return prom_read_be16(&board_info->board_id); +} + +int __init bootbase_present(void) +{ + u32 t; + + if (bootbase_found) + goto out; + + /* check presence of the dbgarea */ + if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0) + goto out; + + board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR); + + /* check for a valid BootExt address */ + t = bootbase_get_bootext_addr(); + if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX)) + goto out; + + bootbase_info.vendor_id = bootbase_get_vendor_id(); + bootbase_info.board_id = bootbase_get_board_id(); + bootbase_get_mac(bootbase_info.mac); + + bootbase_found = 1; + +out: + return bootbase_found; +} + diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/cfe.c new file mode 100644 index 0000000000..5a343cd7e4 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/cfe.c @@ -0,0 +1,69 @@ +/* + * Broadcom's CFE specific prom routines + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include + +#include +#include + +#include +#include "prom_read.h" + +/* + * CFE based boards + */ +#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE +from other bootloaders */ + +static int cfe_found; + +static u32 cfe_handle; +static u32 cfe_entry; +static u32 cfe_seal; + +int __init cfe_present(void) +{ + /* + * This method only works, when we are booted directly from the CFE. + */ + u32 a1 = (u32) fw_arg1; + + if (cfe_found) + return 1; + + cfe_handle = (u32) fw_arg0; + cfe_entry = (u32) fw_arg2; + cfe_seal = (u32) fw_arg3; + + /* Check for CFE by finding the CFE magic number */ + if (cfe_seal != CFE_EPTSEAL) + return 0; + + /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */ + if (a1 != 0) + return 0; + + /* The cfe_handle, and the cfe_entry must be kernel mode addresses */ + if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) + return 0; + + cfe_found = 1; + return 1; +} + +char *cfe_getenv(char *envname) +{ + if (cfe_found == 0) + return NULL; + + return NULL; +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/generic.c new file mode 100644 index 0000000000..4d4caa8476 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/generic.c @@ -0,0 +1,47 @@ +/* + * Generic PROM routines + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include + +#include + +static int *_prom_argc; +static char **_prom_argv; +static char **_prom_envp; + +char *generic_prom_getenv(char *envname) +{ + char **env; + char *ret; + + ret = NULL; + for (env = _prom_envp; *env != NULL; env++) { + if (strcmp(envname, *env++) == 0) { + ret = *env; + break; + } + } + + return ret; +} + +int generic_prom_present(void) +{ + _prom_argc = (int *)fw_arg0; + _prom_argv = (char **)fw_arg1; + _prom_envp = (char **)fw_arg2; + + return 1; +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/myloader.c new file mode 100644 index 0000000000..5357db511b --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/myloader.c @@ -0,0 +1,68 @@ +/* + * Compex's MyLoader specific prom routines + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include "prom_read.h" + +#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000) +#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800) +#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000) + +static int myloader_found; + +struct myloader_info myloader_info; + +int __init myloader_present(void) +{ + struct mylo_system_params *sysp; + struct mylo_board_params *boardp; + struct mylo_partition_table *parts; + int i; + + if (myloader_found) + goto out; + + sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR); + boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR); + parts = (struct mylo_partition_table *)(PART_TABLE_ADDR); + + /* Check for some magic numbers */ + if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) || + (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) || + (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS)) + goto out; + + myloader_info.vid = le32_to_cpu(sysp->vid); + myloader_info.did = le32_to_cpu(sysp->did); + myloader_info.svid = le32_to_cpu(sysp->svid); + myloader_info.sdid = le32_to_cpu(sysp->sdid); + + for (i = 0; i < MYLO_ETHADDR_COUNT; i++) { + int j; + for (j = 0; j < 6; j++) + myloader_info.macs[i][j] = boardp->addr[i].mac[j]; + } + + myloader_found = 1; + +out: + return myloader_found; +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/prom_read.h new file mode 100644 index 0000000000..1a6ea110ce --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/prom_read.h @@ -0,0 +1,50 @@ +/* + * Generic prom definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ADM5120_PROM_H_ +#define _ADM5120_PROM_H_ + +/* + * Helper routines + */ +static inline u16 prom_read_le16(void *buf) +{ + u8 *p = buf; + + return ((u16)p[0] + ((u16)p[1] << 8)); +} + +static inline u32 prom_read_le32(void *buf) +{ + u8 *p = buf; + + return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) + + ((u32)p[3] << 24)); +} + +static inline u16 prom_read_be16(void *buf) +{ + u8 *p = buf; + + return (((u16)p[0] << 8) + (u16)p[1]); +} + +static inline u32 prom_read_be32(void *buf) +{ + u8 *p = buf; + + return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) + + ((u32)p[3])); +} + +#endif /* _ADM5120_PROM_H_ */ + + diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/routerboot.c new file mode 100644 index 0000000000..d9a06d968e --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/prom/routerboot.c @@ -0,0 +1,121 @@ +/* + * Mikrotik's RouterBOOT specific prom routines + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include "prom_read.h" + +struct rb_hard_settings rb_hs; +static int rb_found; + +static int __init routerboot_load_hs(u8 *buf, u16 buflen) +{ + u16 id, len; + + memset(&rb_hs, 0, sizeof(rb_hs)); + + if (buflen < 4) + return -1; + + if (prom_read_le32(buf) != RB_MAGIC_HARD) + return -1; + + /* skip magic value */ + buf += 4; + buflen -= 4; + + while (buflen > 2) { + id = prom_read_le16(buf); + buf += 2; + buflen -= 2; + if (id == RB_ID_TERMINATOR || buflen < 2) + break; + + len = prom_read_le16(buf); + buf += 2; + buflen -= 2; + + if (buflen < len) + break; + + switch (id) { + case RB_ID_BIOS_VERSION: + rb_hs.bios_ver = (char *)buf; + break; + case RB_ID_BOARD_NAME: + rb_hs.name = (char *)buf; + break; + case RB_ID_MEMORY_SIZE: + rb_hs.mem_size = prom_read_le32(buf); + break; + case RB_ID_MAC_ADDRESS_COUNT: + rb_hs.mac_count = prom_read_le32(buf); + break; + case RB_ID_MAC_ADDRESS_PACK: + if ((len / RB_MAC_SIZE) > 0) + rb_hs.mac_base = buf; + break; + } + + buf += len; + buflen -= len; + + } + + return 0; +} + +#define RB_BS_OFFS 0x14 +#define RB_OFFS_MAX (128*1024) + +int __init routerboot_present(void) +{ + struct rb_bios_settings *bs; + u8 *base; + u32 off, len; + + if (rb_found) + goto out; + + base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE); + bs = (struct rb_bios_settings *)(base + RB_BS_OFFS); + + off = prom_read_le32(&bs->hs_offs); + len = prom_read_le32(&bs->hs_size); + if (off > RB_OFFS_MAX) + goto out; + + if (routerboot_load_hs(base+off, len) != 0) + goto out; + + rb_found = 1; + +out: + return rb_found; +} + +char *routerboot_get_boardname(void) +{ + if (rb_found == 0) + return NULL; + + return rb_hs.name; +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/Makefile b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/Makefile new file mode 100644 index 0000000000..e8325a1b1f --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/Makefile @@ -0,0 +1,4 @@ +obj-y += p-33x.o + +obj-${CONFIG_ADM5120_MACH_P_334WT} += p-334wt.o +obj-${CONFIG_ADM5120_MACH_P_335} += p-335.o \ No newline at end of file diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-334wt.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-334wt.c new file mode 100644 index 0000000000..6cc9aee857 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-334wt.c @@ -0,0 +1,34 @@ +/* + * ZyXEL Prestige P-334WT support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "p-33x.h" + +static struct gpio_led p334wt_gpio_leds[] __initdata = { + GPIO_LED_INV(ADM5120_GPIO_PIN2, "power", NULL), + GPIO_LED_INV(ADM5120_GPIO_P3L0, "lan1", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan3", NULL), + GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan4", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L0, "wan", NULL), + GPIO_LED_INV(ADM5120_GPIO_P4L2, "wlan", NULL), + GPIO_LED_INV(ADM5120_GPIO_P2L2, "otist", NULL), + GPIO_LED_INV(ADM5120_GPIO_P1L2, "hidden", NULL), +}; + +static void __init p334wt_setup(void) +{ + p33x_generic_setup(); + adm5120_add_device_gpio_leds(ARRAY_SIZE(p334wt_gpio_leds), + p334wt_gpio_leds); +} + +MIPS_MACHINE(MACH_ADM5120_P334WT, "P-334WT", "ZyXEL Prestige 334WT", + p334wt_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-335.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-335.c new file mode 100644 index 0000000000..6ac2b09158 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-335.c @@ -0,0 +1,21 @@ +/* + * ZyXEL Prestige P-335/335WT support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "p-33x.h" + +static void __init p335_setup(void) +{ + p33x_generic_setup(); + adm5120_add_device_usb(); +} + +MIPS_MACHINE(MACH_ADM5120_P335, "P-335", "ZyXEL Prestige 335/335WT", + p335_setup); diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.c new file mode 100644 index 0000000000..2626cf9eec --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.c @@ -0,0 +1,85 @@ +/* + * ZyXEL Prestige P-33x boards support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include "p-33x.h" + +#include + +#define P33X_GPIO_FLASH_A20 ADM5120_GPIO_PIN5 +static struct mtd_partition p33x_partitions[] = { + { + .name = "bootbase", + .offset = 0, + .size = 16*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "rom", + .offset = MTDPART_OFS_APPEND, + .size = 16*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "bootext1", + .offset = MTDPART_OFS_APPEND, + .size = 32*1024, + } , { + .name = "bootext2", + .offset = MTDPART_OFS_APPEND, + .size = 64*1024, + } , { + .name = "trx", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } , { + .name = "firmware", + .offset = 32*1024, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), +}; + +static u8 p33x_vlans[6] __initdata = { + /* FIXME: untested */ + 0x50, 0x48, 0x44, 0x42, 0x41, 0x00 +}; + +static void switch_bank_gpio5(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(P33X_GPIO_FLASH_A20, 0); + break; + case 1: + gpio_set_value(P33X_GPIO_FLASH_A20, 1); + break; + } +} + +void __init p33x_generic_setup(void) +{ + /* setup data for flash0 device */ + gpio_request(P33X_GPIO_FLASH_A20, NULL); /* for flash A20 line */ + gpio_direction_output(P33X_GPIO_FLASH_A20, 0); + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions); + adm5120_flash0_data.parts = p33x_partitions; + adm5120_add_device_flash(0); + + adm5120_add_device_uart(0); + adm5120_add_device_uart(1); + + adm5120_setup_eth_macs(bootbase_info.mac); + adm5120_add_device_switch(6, p33x_vlans); + + adm5120_pci_set_irq_map(ARRAY_SIZE(p33x_pci_irqs), p33x_pci_irqs); +} diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.h b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.h new file mode 100644 index 0000000000..8a7340cb5e --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/adm5120/zyxel/p-33x.h @@ -0,0 +1,22 @@ +/* + * ZyXEL Prestige P-33x boards support + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include + +#include +#include + +extern void p33x_generic_setup(void) __init; diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h new file mode 100644 index 0000000000..bf220ff4d6 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_defs.h @@ -0,0 +1,53 @@ +/* + * ADM5120 SoC definitions + * + * This file defines some constants specific to the ADM5120 SoC + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _ASM_MIPS_MACH_ADM5120_DEFS_H +#define _ASM_MIPS_MACH_ADM5120_DEFS_H + +#define ADM5120_SDRAM0_BASE 0x00000000 +#define ADM5120_SDRAM1_BASE 0x01000000 +#define ADM5120_SRAM1_BASE 0x10000000 +#define ADM5120_EXTIO0_BASE 0x10C00000 +#define ADM5120_EXTIO0_SIZE 0x00200000 +#define ADM5120_EXTIO1_BASE 0x10E00000 +#define ADM5120_EXTIO1_SIZE 0x00200000 +#define ADM5120_MPMC_BASE 0x11000000 +#define ADM5120_MPMC_SIZE 0x00200000 +#define ADM5120_USBC_BASE 0x11200000 +#define ADM5120_USBC_SIZE 0x00200000 +#define ADM5120_PCIMEM_BASE 0x11400000 +#define ADM5120_PCIMEM_SIZE 0x00100000 +#define ADM5120_PCIIO_BASE 0x11500000 +#define ADM5120_PCIIO_SIZE 0x000FFFF0 +#define ADM5120_PCICFG_ADDR 0x115FFFF0 +#define ADM5120_PCICFG_DATA 0x115FFFF8 +#define ADM5120_PCICFG_SIZE 0x00000010 +#define ADM5120_SWITCH_BASE 0x12000000 +#define ADM5120_SWITCH_SIZE 0x00200000 +#define ADM5120_INTC_BASE 0x12200000 +#define ADM5120_INTC_SIZE 0x00200000 +#define ADM5120_UART0_BASE 0x12600000 +#define ADM5120_UART1_BASE 0x12800000 +#define ADM5120_UART_SIZE 0x00200000 +#define ADM5120_SRAM0_BASE 0x1FC00000 + +#define ADM5120_NAND_BASE ADM5120_SRAM1_BASE +#define ADM5120_NAND_SIZE 0xB + +#define ADM5120_CLK_175 175000000 +#define ADM5120_CLK_200 200000000 +#define ADM5120_CLK_225 225000000 +#define ADM5120_CLK_250 250000000 + +#define ADM5120_UART_CLOCK 62500000 + +#endif /* _ASM_MIPS_MACH_ADM5120_DEFS_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h new file mode 100644 index 0000000000..1d34d80ee6 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_info.h @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2007-2009 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_INFO_H +#define _MACH_ADM5120_INFO_H + +#include + +extern unsigned int adm5120_prom_type; +#define ADM5120_PROM_GENERIC 0 +#define ADM5120_PROM_CFE 1 +#define ADM5120_PROM_MYLOADER 2 +#define ADM5120_PROM_ROUTERBOOT 3 +#define ADM5120_PROM_BOOTBASE 4 +#define ADM5120_PROM_UBOOT 5 +#define ADM5120_PROM_LAST 5 + +extern unsigned int adm5120_product_code; +extern unsigned int adm5120_revision; +extern unsigned int adm5120_nand_boot; + +extern unsigned long adm5120_speed; +#define ADM5120_SPEED_175 175000000 +#define ADM5120_SPEED_200 200000000 +#define ADM5120_SPEED_225 225000000 +#define ADM5120_SPEED_250 250000000 + +extern unsigned int adm5120_package; +#define ADM5120_PACKAGE_PQFP 0 +#define ADM5120_PACKAGE_BGA 1 + +extern unsigned long adm5120_memsize; + +enum { + MACH_ADM5120_GENERIC = 0, /* Generic board */ + MACH_ADM5120_5GXI, /* OSBRiDGE 5GXi/5XLi */ + MACH_ADM5120_BR6104K, /* Edimax BR-6104K */ + MACH_ADM5120_BR6104KP, /* Edimax BR-6104KP */ + MACH_ADM5120_BR61X4WG, /* Edimax BR-6104Wg/BR-6114WG */ + MACH_ADM5120_CAS630, /* Cellvision CAS-630/630W */ + MACH_ADM5120_CAS670, /* Cellvision CAS-670/670W */ + MACH_ADM5120_CAS700, /* Cellvision CAS-700/700W */ + MACH_ADM5120_CAS771, /* Cellvision CAS-771/771W */ + MACH_ADM5120_CAS790, /* Cellvision CAS-790 */ + MACH_ADM5120_CAS861, /* Cellvision CAS-861/861W */ + MACH_ADM5120_EASY5120PATA, /* Infineon EASY 5120P-ATA */ + MACH_ADM5120_EASY5120RT, /* Infineon EASY 5120-RT */ + MACH_ADM5120_EASY5120WVOIP, /* Infineon EASY 5120-WVoIP */ + MACH_ADM5120_EASY83000, /* Infineon EASY-83000 */ + MACH_ADM5120_ES2108, /* ZyXEL Ethernet Switch 2108 */ + MACH_ADM5120_ES2108F, /* ZyXEL Ethernet Switch 2108-F */ + MACH_ADM5120_ES2108G, /* ZyXEL Ethernet Switch 2108-G */ + MACH_ADM5120_ES2108LC, /* ZyXEL Ethernet Switch 2108-LC */ + MACH_ADM5120_ES2108PWR, /* ZyXEL Ethernet Switch 2108-PWR */ + MACH_ADM5120_ES2024A, /* ZyXEL Ethernet Switch 2024A */ + MACH_ADM5120_ES2024PWR, /* ZyXEL Ethernet Switch 2024PWR */ + MACH_ADM5120_HS100, /* ZyXEL HomeSafe 100/100W */ + MACH_ADM5120_NFS101U, /* Cellvision NFS-101U/101WU */ + MACH_ADM5120_NFS202U, /* Cellvision NFS-202U/202WU */ + MACH_ADM5120_NP28G, /* Compex NP28G */ + MACH_ADM5120_NP28GHS, /* Compex NP28G HotSpot */ + MACH_ADM5120_NP27G, /* Compex NP27G */ + MACH_ADM5120_RB_11X, /* Mikrotik RouterBOARD 111/112 */ + MACH_ADM5120_RB_133, /* Mikrotik RouterBOARD 133 */ + MACH_ADM5120_RB_133C, /* Mikrotik RouterBOARD 133c */ + MACH_ADM5120_RB_150, /* Mikrotik RouterBOARD 150 */ + MACH_ADM5120_RB_153, /* Mikrotik RouterBOARD 153 */ + MACH_ADM5120_RB_192, /* Mikrotik RouterBOARD 192 */ + MACH_ADM5120_P334U, /* ZyXEL Prestige 334U */ + MACH_ADM5120_P334W, /* ZyXEL Prestige 334W */ + MACH_ADM5120_P334WH, /* ZyXEL Prestige 334WH */ + MACH_ADM5120_P334WHD, /* ZyXEL Prestige 334WHD */ + MACH_ADM5120_P334WT, /* ZyXEL Prestige 334WT */ + MACH_ADM5120_P335, /* ZyXEL Prestige 335/335WT */ + MACH_ADM5120_P335PLUS, /* ZyXEL Prestige 335Plus */ + MACH_ADM5120_P335U, /* ZyXEL Prestige 335U */ + MACH_ADM5120_PMUGW, /* Motorola Powerline MU Gateway */ + MACH_ADM5120_WP54, /* Compex WP54G/WP54AG/WPP54G/WPP54AG */ + MACH_ADM5120_WP54G_WRT, /* Compex WP54G-WRT */ + MACH_ADM5120_WP54Gv1C, /* Compex WP54G version 1C */ + MACH_ADM5120_EB_214A, /* Generic EB-214A */ +}; + +/* + * TODO:remove adm5120_eth* variables when the switch driver will be + * converted into a real platform driver + */ +extern unsigned int adm5120_eth_num_ports; +extern unsigned char adm5120_eth_macs[6][6]; +extern unsigned char adm5120_eth_vlans[6]; + +extern void adm5120_soc_init(void) __init; +extern void adm5120_mem_init(void) __init; +extern void adm5120_ndelay(u32 ns); + +extern void (*adm5120_board_reset)(void); + +extern void adm5120_gpio_init(void) __init; +extern void adm5120_gpio_csx0_enable(void) __init; +extern void adm5120_gpio_csx1_enable(void) __init; +extern void adm5120_gpio_ew_enable(void) __init; + +static inline int adm5120_package_pqfp(void) +{ + return (adm5120_package == ADM5120_PACKAGE_PQFP); +} + +static inline int adm5120_package_bga(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +static inline int adm5120_has_pci(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +static inline int adm5120_has_gmii(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +#endif /* _MACH_ADM5120_INFO_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h new file mode 100644 index 0000000000..70dd6bbe85 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_intc.h @@ -0,0 +1,63 @@ +/* + * ADM5120 interrupt controller definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in interrupt controller. + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_INTC_H +#define _MACH_ADM5120_INTC_H + +/* + * INTC register offsets + */ +#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */ +#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */ +#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */ +#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */ +#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR +#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */ +#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */ +#define INTC_REG_IRQ_TEST_SOURCE 0x1C +#define INTC_REG_IRQ_SOURCE_SELECT 0x20 +#define INTC_REG_INT_LEVEL 0x24 + +/* + * INTC IRQ numbers + */ +#define INTC_IRQ_TIMER 0 /* built in timer */ +#define INTC_IRQ_UART0 1 /* built-in UART0 */ +#define INTC_IRQ_UART1 2 /* built-in UART1 */ +#define INTC_IRQ_USBC 3 /* USB Host Controller */ +#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */ +#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */ +#define INTC_IRQ_PCI0 6 /* PCI slot 2 */ +#define INTC_IRQ_PCI1 7 /* PCI slot 3 */ +#define INTC_IRQ_PCI2 8 /* PCI slot 4 */ +#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */ +#define INTC_IRQ_LAST INTC_IRQ_SWITCH +#define INTC_IRQ_COUNT 10 + +/* + * INTC register bits + */ +#define INTC_INT_TIMER (1 << INTC_IRQ_TIMER) +#define INTC_INT_UART0 (1 << INTC_IRQ_UART0) +#define INTC_INT_UART1 (1 << INTC_IRQ_UART1) +#define INTC_INT_USBC (1 << INTC_IRQ_USBC) +#define INTC_INT_INTX0 (1 << INTC_IRQ_INTX0) +#define INTC_INT_INTX1 (1 << INTC_IRQ_INTX1) +#define INTC_INT_PCI0 (1 << INTC_IRQ_PCI0) +#define INTC_INT_PCI1 (1 << INTC_IRQ_PCI1) +#define INTC_INT_PCI2 (1 << INTC_IRQ_PCI2) +#define INTC_INT_SWITCH (1 << INTC_IRQ_SWITCH) +#define INTC_INT_ALL ((1 << INTC_IRQ_COUNT) - 1) + +#endif /* _MACH_ADM5120_INTC_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h new file mode 100644 index 0000000000..c4e9591fb8 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h @@ -0,0 +1,92 @@ +/* + * ADM5120 MPMC (Multiport Memory Controller) register definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_MPMC_H +#define _MACH_ADM5120_MPMC_H + +#define MPMC_READ_REG(r) __raw_readl( \ + (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r) +#define MPMC_WRITE_REG(r, v) __raw_writel((v), \ + (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r) + +#define MPMC_REG_CTRL 0x0000 +#define MPMC_REG_STATUS 0x0004 +#define MPMC_REG_CONF 0x0008 +#define MPMC_REG_DC 0x0020 +#define MPMC_REG_DR 0x0024 +#define MPMC_REG_DRP 0x0030 + +#define MPMC_REG_DC0 0x0100 +#define MPMC_REG_DRC0 0x0104 +#define MPMC_REG_DC1 0x0120 +#define MPMC_REG_DRC1 0x0124 +#define MPMC_REG_DC2 0x0140 +#define MPMC_REG_DRC2 0x0144 +#define MPMC_REG_DC3 0x0160 +#define MPMC_REG_DRC3 0x0164 +#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */ +#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */ +#define MPMC_REG_SC2 0x0240 +#define MPMC_REG_WEN2 0x0244 +#define MPMC_REG_OEN2 0x0248 +#define MPMC_REG_RD2 0x024C +#define MPMC_REG_PG2 0x0250 +#define MPMC_REG_WR2 0x0254 +#define MPMC_REG_TN2 0x0258 +#define MPMC_REG_SC3 0x0260 + +/* Control register bits */ +#define MPMC_CTRL_AM (1 << 1) /* Address Mirror */ +#define MPMC_CTRL_LPM (1 << 2) /* Low Power Mode */ +#define MPMC_CTRL_DWB (1 << 3) /* Drain Write Buffers */ + +/* Status register bits */ +#define MPMC_STATUS_BUSY (1 << 0) /* Busy */ +#define MPMC_STATUS_WBS (1 << 1) /* Write Buffer Status */ +#define MPMC_STATUS_SRA (1 << 2) /* Self-Refresh Acknowledge*/ + +/* Dynamic Control register bits */ +#define MPMC_DC_CE (1 << 0) +#define MPMC_DC_DMC (1 << 1) +#define MPMC_DC_SRR (1 << 2) +#define MPMC_DC_SI_SHIFT 7 +#define MPMC_DC_SI_MASK (3 << 7) +#define MPMC_DC_SI_NORMAL (0 << 7) +#define MPMC_DC_SI_MODE (1 << 7) +#define MPMC_DC_SI_PALL (2 << 7) +#define MPMC_DC_SI_NOP (3 << 7) + +#define SRAM_REG_CONF 0x00 +#define SRAM_REG_WWE 0x04 +#define SRAM_REG_WOE 0x08 +#define SRAM_REG_WRD 0x0C +#define SRAM_REG_WPG 0x10 +#define SRAM_REG_WWR 0x14 +#define SRAM_REG_WTR 0x18 + +/* Dynamic Configuration register bits */ +#define DC_BE (1 << 19) /* buffer enable */ +#define DC_RW_SHIFT 28 /* shift for number of rows */ +#define DC_RW_MASK 0x03 +#define DC_NB_SHIFT 26 /* shift for number of banks */ +#define DC_NB_MASK 0x01 +#define DC_CW_SHIFT 22 /* shift for number of columns */ +#define DC_CW_MASK 0x07 +#define DC_DW_SHIFT 7 /* shift for device width */ +#define DC_DW_MASK 0x03 + +/* Static Configuration register bits */ +#define SC_MW_MASK 0x03 /* memory width mask */ +#define SC_MW_8 0x00 /* 8 bit memory width */ +#define SC_MW_16 0x01 /* 16 bit memory width */ +#define SC_MW_32 0x02 /* 32 bit memory width */ + +#endif /* _MACH_ADM5120_MPMC_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h new file mode 100644 index 0000000000..1e2f3bd15d --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_nand.h @@ -0,0 +1,89 @@ +/* + * ADM5120 NAND interface definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in NAND interface. + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * NAND interface routines was based on a driver for Linux 2.6.19+ which + * was derived from the driver for Linux 2.4.xx published by Mikrotik for + * their RouterBoard 1xx and 5xx series boards. + * Copyright (C) 2007 David Goodenough + * Copyright (C) 2007 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_NAND_H +#define _MACH_ADM5120_NAND_H + +#include +#include + +#include +#include + +/* NAND control registers */ +#define NAND_REG_DATA 0x0 /* data register */ +#define NAND_REG_SET_CEn 0x1 /* CE# low */ +#define NAND_REG_CLR_CEn 0x2 /* CE# high */ +#define NAND_REG_CLR_CLE 0x3 /* CLE low */ +#define NAND_REG_SET_CLE 0x4 /* CLE high */ +#define NAND_REG_CLR_ALE 0x5 /* ALE low */ +#define NAND_REG_SET_ALE 0x6 /* ALE high */ +#define NAND_REG_SET_SPn 0x7 /* SP# low (use spare area) */ +#define NAND_REG_CLR_SPn 0x8 /* SP# high (do not use spare area) */ +#define NAND_REG_SET_WPn 0x9 /* WP# low */ +#define NAND_REG_CLR_WPn 0xA /* WP# high */ +#define NAND_REG_STATUS 0xB /* Status register */ + +#define ADM5120_NAND_STATUS_READY 0x80 + +#define NAND_READ_REG(r) \ + readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r)) +#define NAND_WRITE_REG(r, v) \ + writeb((v), (void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r)) + +/*-------------------------------------------------------------------------*/ + +static inline void adm5120_nand_enable(void) +{ + SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE); + SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1); +} + +static inline void adm5120_nand_set_wpn(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1); +} + +static inline void adm5120_nand_set_spn(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1); +} + +static inline void adm5120_nand_set_cle(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1); +} + +static inline void adm5120_nand_set_ale(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1); +} + +static inline void adm5120_nand_set_cen(unsigned int set) +{ + NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1); +} + +static inline u8 adm5120_nand_get_status(void) +{ + return NAND_READ_REG(NAND_REG_STATUS); +} + +#endif /* _MACH_ADM5120_NAND_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h new file mode 100644 index 0000000000..ed73b53297 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_platform.h @@ -0,0 +1,87 @@ +/* + * ADM5120 specific platform definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ASM_MIPS_MACH_ADM5120_PLATFORM_H +#define _ASM_MIPS_MACH_ADM5120_PLATFORM_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct adm5120_flash_platform_data { + void (*set_vpp)(struct map_info *, int); + void (*switch_bank)(unsigned); + u32 window_size; + unsigned int nr_parts; + struct mtd_partition *parts; +}; + +struct adm5120_switch_platform_data { + /* TODO: not yet implemented */ +}; + +struct adm5120_pci_irq { + u8 slot; + u8 func; + u8 pin; + unsigned irq; +}; + +#define PCIIRQ(s, f, p, i) {.slot = (s), .func = (f), .pin = (p), .irq = (i)} + +#ifdef CONFIG_PCI +extern void adm5120_pci_set_irq_map(unsigned int nr_irqs, + struct adm5120_pci_irq *map) __init; +#else +static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs, + struct adm5120_pci_irq *map) +{ +} +#endif + +extern void adm5120_setup_eth_macs(u8 *mac_base) __init; + +extern struct adm5120_flash_platform_data adm5120_flash0_data; +extern struct adm5120_flash_platform_data adm5120_flash1_data; + +extern void adm5120_add_device_flash(unsigned id) __init; +extern void adm5120_add_device_usb(void) __init; +extern void adm5120_add_device_uart(unsigned id) __init; +extern void adm5120_add_device_nand(struct platform_nand_data *pdata) __init; +extern void adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) __init; +extern void adm5120_register_gpio_buttons(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons); + +#define GPIO_LED_DEF(g, n, t, a) { \ + .name = (n), \ + .default_trigger = (t), \ + .gpio = (g), \ + .active_low = (a) \ +} + +#define GPIO_LED_STD(g, n, t) GPIO_LED_DEF((g), (n), (t), 0) +#define GPIO_LED_INV(g, n, t) GPIO_LED_DEF((g), (n), (t), 1) + +extern void adm5120_add_device_gpio_leds(unsigned num_leds, + struct gpio_led *leds) __init; + +#endif /* _ASM_MIPS_MACH_ADM5120_PLATFORM_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h new file mode 100644 index 0000000000..91adc5bae9 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_switch.h @@ -0,0 +1,300 @@ +/* + * ADM5120 ethernet switch definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in Ethernet switch. + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_SWITCH_H +#define _MACH_ADM5120_SWITCH_H + +#ifndef BIT +# define BIT(at) (1 << (at)) +#endif +#define BITMASK(len) (BIT(len)-1) + +#define SW_READ_REG(r) __raw_readl( \ + (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) +#define SW_WRITE_REG(r, v) __raw_writel((v), \ + (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) + +/* Switch register offsets */ +#define SWITCH_REG_CODE 0x0000 +#define SWITCH_REG_SOFT_RESET 0x0004 /* Soft Reset */ +#define SWITCH_REG_BOOT_DONE 0x0008 /* Boot Done */ +#define SWITCH_REG_SW_RESET 0x000C /* Switch Reset */ +#define SWITCH_REG_PHY_STATUS 0x0014 /* PHY Status */ +#define SWITCH_REG_MEMCTRL 0x001C /* Memory Control */ +#define SWITCH_REG_CPUP_CONF 0x0024 /* CPU Port Configuration */ +#define SWITCH_REG_PORT_CONF0 0x0028 /* Port Configuration 0 */ +#define SWITCH_REG_PORT_CONF1 0x002C /* Port Configuration 1 */ +#define SWITCH_REG_PORT_CONF2 0x0030 /* Port Configuration 2 */ +#define SWITCH_REG_VLAN_G1 0x0040 /* VLAN group 1 */ +#define SWITCH_REG_VLAN_G2 0x0044 /* VLAN group 2 */ +#define SWITCH_REG_SEND_TRIG 0x0048 /* Send Trigger */ +#define SWITCH_REG_MAC_WT0 0x0058 /* MAC Write Address 0 */ +#define SWITCH_REG_MAC_WT1 0x005C /* MAC Write Address 1 */ +#define SWITCH_REG_BW_CNTL0 0x0060 /* Bandwidth Control 0 */ +#define SWITCH_REG_BW_CNTL1 0x0064 /* Bandwidth Control 1 */ +#define SWITCH_REG_PHY_CNTL0 0x0068 /* PHY Control 0 */ +#define SWITCH_REG_PHY_CNTL1 0x006C /* PHY Control 1 */ +#define SWITCH_REG_PORT_TH 0x0078 /* Port Threshold */ +#define SWITCH_REG_PHY_CNTL2 0x007C /* PHY Control 2 */ +#define SWITCH_REG_PHY_CNTL3 0x0080 /* PHY Control 3 */ +#define SWITCH_REG_PRI_CNTL 0x0084 /* Priority Control */ +#define SWITCH_REG_PHY_CNTL4 0x00A0 /* PHY Control 4 */ +#define SWITCH_REG_EMPTY_CNT 0x00A4 /* Empty Count */ +#define SWITCH_REG_PORT_CNTLS 0x00A8 /* Port Control Select */ +#define SWITCH_REG_PORT_CNTL 0x00AC /* Port Control */ +#define SWITCH_REG_INT_STATUS 0x00B0 /* Interrupt Status */ +#define SWITCH_REG_INT_MASK 0x00B4 /* Interrupt Mask */ +#define SWITCH_REG_GPIO_CONF0 0x00B8 /* GPIO Configuration 0 */ +#define SWITCH_REG_GPIO_CONF2 0x00BC /* GPIO Configuration 1 */ +#define SWITCH_REG_WDOG0 0x00C0 /* Watchdog 0 */ +#define SWITCH_REG_WDOG1 0x00C4 /* Watchdog 1 */ + +#define SWITCH_REG_SHDA 0x00D0 /* Send High Descriptors Address */ +#define SWITCH_REG_SLDA 0x00D4 /* Send Low Descriptors Address */ +#define SWITCH_REG_RHDA 0x00D8 /* Receive High Descriptor Address */ +#define SWITCH_REG_RLDA 0x00DC /* Receive Low Descriptor Address */ +#define SWITCH_REG_SHWA 0x00E0 /* Send High Working Address */ +#define SWITCH_REG_SLWA 0x00E4 /* Send Low Working Address */ +#define SWITCH_REG_RHWA 0x00E8 /* Receive High Working Address */ +#define SWITCH_REG_RLWA 0x00EC /* Receive Low Working Address */ + +#define SWITCH_REG_TIMER_INT 0x00F0 /* Timer */ +#define SWITCH_REG_TIMER 0x00F4 /* Timer Interrupt */ + +#define SWITCH_REG_PORT0_LED 0x0100 +#define SWITCH_REG_PORT1_LED 0x0104 +#define SWITCH_REG_PORT2_LED 0x0108 +#define SWITCH_REG_PORT3_LED 0x010C +#define SWITCH_REG_PORT4_LED 0x0110 + +/* CODE register bits */ +#define CODE_PC_MASK BITMASK(16) /* Product Code */ +#define CODE_REV_SHIFT 16 +#define CODE_REV_MASK BITMASK(4) /* Product Revision */ +#define CODE_CLKS_SHIFT 20 +#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */ +#define CODE_CLKS_175 0 /* 175 MHz */ +#define CODE_CLKS_200 1 /* 200 MHz */ +#define CODE_CLKS_225 2 /* 225 MHz */ +#define CODE_CLKS_250 3 /* 250 MHz */ +#define CODE_NAB BIT(24) /* NAND boot */ +#define CODE_PK_MASK BITMASK(1) /* Package type */ +#define CODE_PK_SHIFT 29 +#define CODE_PK_BGA 0 /* BGA package */ +#define CODE_PK_PQFP 1 /* PQFP package */ + +/* MEMCTRL register bits */ +#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */ +#define MEMCTRL_SDRS_4M 0x01 +#define MEMCTRL_SDRS_8M 0x02 +#define MEMCTRL_SDRS_16M 0x03 +#define MEMCTRL_SDRS_64M 0x04 +#define MEMCTRL_SDRS_128M 0x05 +#define MEMCTRL_SDR1_ENABLE BIT(5) /* enable SDRAM bank 1 */ + +#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */ +#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */ +#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */ +#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */ +#define MEMCTRL_SRS_512K 0x01 /* 512KB*/ +#define MEMCTRL_SRS_1M 0x02 /* 1MB */ +#define MEMCTRL_SRS_2M 0x03 /* 2MB */ +#define MEMCTRL_SRS_4M 0x04 /* 4MB */ + +/* Port bits used in various registers */ +#define SWITCH_PORT_PHY0 BIT(0) +#define SWITCH_PORT_PHY1 BIT(1) +#define SWITCH_PORT_PHY2 BIT(2) +#define SWITCH_PORT_PHY3 BIT(3) +#define SWITCH_PORT_PHY4 BIT(4) +#define SWITCH_PORT_MII BIT(5) +#define SWITCH_PORT_CPU BIT(6) + +/* Port bit shorthands */ +#define SWITCH_PORTS_PHY 0x1F /* phy ports */ +#define SWITCH_PORTS_NOCPU 0x3F /* physical ports */ +#define SWITCH_PORTS_ALL 0x7F /* all ports */ + +/* CPUP_CONF register bits */ +#define CPUP_CONF_DCPUP BIT(0) /* Disable CPU port */ +#define CPUP_CONF_CRCP BIT(1) /* CRC padding from CPU */ +#define CPUP_CONF_BTM BIT(2) /* Bridge Testing Mode */ +#define CPUP_CONF_DUNP_SHIFT 9 /* Disable Unknown Packets for portX */ +#define CPUP_CONF_DMCP_SHIFT 16 /* Disable Mcast Packets form portX */ +#define CPUP_CONF_DBCP_SHIFT 24 /* Disable Bcast Packets form portX */ + +/* PORT_CONF0 register bits */ +#define PORT_CONF0_DP_SHIFT 0 /* Disable Port */ +#define PORT_CONF0_EMCP_SHIFT 8 /* Enable All MC Packets */ +#define PORT_CONF0_BP_SHIFT 16 /* Enable Back Pressure */ + +/* PORT_CONF1 register bits */ +#define PORT_CONF1_DISL_SHIFT 0 /* Disable Learning */ +#define PORT_CONF1_BS_SHIFT 6 /* Blocking State */ +#define PORT_CONF1_BM_SHIFT 12 /* Blocking Mode */ + +/* SEND_TRIG register bits */ +#define SEND_TRIG_STL BIT(0) /* Send Trigger Low */ +#define SEND_TRIG_STH BIT(1) /* Send Trigger High */ + +/* MAC_WT0 register bits */ +#define MAC_WT0_MAWC BIT(0) /* MAC address write command */ +#define MAC_WT0_MWD_SHIFT 1 +#define MAC_WT0_MWD BIT(1) /* MAC write done */ +#define MAC_WT0_WFB BIT(2) /* Write Filter Bit */ +#define MAC_WT0_WVN_SHIFT 3 /* Write Vlan Number shift */ +#define MAC_WT0_WVE BIT(6) /* Write VLAN enable */ +#define MAC_WT0_WPMN_SHIFT 7 +#define MAC_WT0_WAF_SHIFT 13 /* Write Age Field shift */ +#define MAC_WT0_WAF_EMPTY 0 +#define MAC_WT0_WAF_STATIC 7 /* age: static */ +#define MAC_WT0_MAC0_SHIFT 16 +#define MAC_WT0_MAC1_SHIFT 24 + +/* MAC_WT1 register bits */ +#define MAC_WT1_MAC2_SHIFT 0 +#define MAC_WT1_MAC3_SHIFT 8 +#define MAC_WT1_MAC4_SHIFT 16 +#define MAC_WT1_MAC5_SHIFT 24 + +/* BW_CNTL0/BW_CNTL1 register bits */ +#define BW_CNTL_DISABLE 0x00 +#define BW_CNTL_64K 0x01 +#define BW_CNTL_128K 0x02 +#define BW_CNTL_256K 0x03 +#define BW_CNTL_512K 0x04 +#define BW_CNTL_1M 0x05 +#define BW_CNTL_4M 0x06 +#define BW_CNTL_10M 0x07 + +#define P4TBC_SHIFT 0 +#define P4RBC_SHIFT 4 +#define P5TBC_SHIFT 8 +#define P5RBC_SHIFT 12 + +#define BW_CNTL1_NAND_ENABLE 0x100 + +/* PHY_CNTL0 register bits */ +#define PHY_CNTL0_PHYA_MASK BITMASK(5) +#define PHY_CNTL0_PHYR_MASK BITMASK(5) +#define PHY_CNTL0_PHYR_SHIFT 8 +#define PHY_CNTL0_WC BIT(13) /* Write Command */ +#define PHY_CNTL0_RC BIT(14) /* Read Command */ +#define PHY_CNTL0_WTD_MASK BIT(16) /* Read Command */ +#define PHY_CNTL0_WTD_SHIFT 16 + +/* PHY_CNTL1 register bits */ +#define PHY_CNTL1_WOD BIT(0) /* Write Operation Done */ +#define PHY_CNTL1_ROD BIT(1) /* Read Operation Done */ +#define PHY_CNTL1_RD_MASK BITMASK(16) +#define PHY_CNTL1_RD_SHIFT 16 + +/* PHY_CNTL2 register bits */ +#define PHY_CNTL2_ANE_SHIFT 0 /* Auto Negotiation Enable */ +#define PHY_CNTL2_SC_SHIFT 5 /* Speed Control */ +#define PHY_CNTL2_DC_SHIFT 10 /* Duplex Control */ +#define PHY_CNTL2_FNCV_SHIFT 15 /* Recommended FC Value */ +#define PHY_CNTL2_PHYR_SHIFT 20 /* PHY reset */ +#define PHY_CNTL2_AMDIX_SHIFT 25 /* Auto MDIX enable */ +/* PHY_CNTL2_RMAE is bad in datasheet */ +#define PHY_CNTL2_RMAE BIT(31) /* Recommended MCC Average enable */ + +/* PHY_CNTL3 register bits */ +#define PHY_CNTL3_RNT BIT(10) /* Recommend Normal Threshold */ + +/* PORT_TH register bits */ +#define PORT_TH_PPT_MASK BITMASK(8) /* Per Port Threshold */ +#define PORT_TH_CPUT_SHIFT 8 /* CPU Port Buffer Threshold */ +#define PORT_TH_CPUT_MASK BITMASK(8) +#define PORT_TH_CPUHT_SHIFT 16 /* CPU Hold Threshold */ +#define PORT_TH_CPUHT_MASK BITMASK(8) +#define PORT_TH_CPURT_SHIFT 24 /* CPU Release Threshold */ +#define PORT_TH_CPURT_MASK BITMASK(8) + +/* EMPTY_CNT register bits */ +#define EMPTY_CNT_EBGB_MASK BITMASK(9) /* Empty Blocks in the Global Buffer */ + +/* GPIO_CONF0 register bits */ +#define GPIO_CONF0_MASK BITMASK(8) +#define GPIO_CONF0_IM_SHIFT 0 +#define GPIO_CONF0_IV_SHIFT 8 +#define GPIO_CONF0_OE_SHIFT 16 +#define GPIO_CONF0_OV_SHIFT 24 +#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT) +#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT) +#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT) +#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT) + +/* GPIO_CONF2 register bits */ +#define GPIO_CONF2_CSX0 BIT(4) /* enable CSX0:INTX0 on GPIO 1:2 */ +#define GPIO_CONF2_CSX1 BIT(5) /* enable CSX1:INTX1 on GPIO 3:4 */ +#define GPIO_CONF2_EW BIT(6) /* enable wait state pin for CSX0/1 */ + +/* INT_STATUS/INT_MASK register bits */ +#define SWITCH_INT_SHD BIT(0) /* Send High Done */ +#define SWITCH_INT_SLD BIT(1) /* Send Low Done */ +#define SWITCH_INT_RHD BIT(2) /* Receive High Done */ +#define SWITCH_INT_RLD BIT(3) /* Receive Low Done */ +#define SWITCH_INT_HDF BIT(4) /* High Descriptor Full */ +#define SWITCH_INT_LDF BIT(5) /* Low Descriptor Full */ +#define SWITCH_INT_P0QF BIT(6) /* Port0 Queue Full */ +#define SWITCH_INT_P1QF BIT(7) /* Port1 Queue Full */ +#define SWITCH_INT_P2QF BIT(8) /* Port2 Queue Full */ +#define SWITCH_INT_P3QF BIT(9) /* Port3 Queue Full */ +#define SWITCH_INT_P4QF BIT(10) /* Port4 Queue Full */ +#define SWITCH_INT_P5QF BIT(11) /* Port5 Queue Full */ +#define SWITCH_INT_CPQF BIT(13) /* CPU Queue Full */ +#define SWITCH_INT_GQF BIT(14) /* Global Queue Full */ +#define SWITCH_INT_MD BIT(15) /* Must Drop */ +#define SWITCH_INT_BCS BIT(16) /* BC Storm */ +#define SWITCH_INT_PSC BIT(18) /* Port Status Change */ +#define SWITCH_INT_ID BIT(19) /* Intruder Detected */ +#define SWITCH_INT_W0TE BIT(20) /* Watchdog 0 Timer Expired */ +#define SWITCH_INT_W1TE BIT(21) /* Watchdog 1 Timer Expired */ +#define SWITCH_INT_RDE BIT(22) /* Receive Descriptor Error */ +#define SWITCH_INT_SDE BIT(23) /* Send Descriptor Error */ +#define SWITCH_INT_CPUH BIT(24) /* CPU Hold */ + +/* TIMER_INT register bits */ +#define TIMER_INT_TOS BIT(0) /* time-out status */ +#define TIMER_INT_TOM BIT(16) /* mask time-out interrupt */ + +/* TIMER register bits */ +#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */ +#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */ +#define TIMER_TE BIT(16) /* timer enable bit */ + +/* PORTx_LED register bits */ +#define LED_MODE_MASK BITMASK(4) +#define LED_MODE_INPUT 0 +#define LED_MODE_FLASH 1 +#define LED_MODE_OUT_HIGH 2 +#define LED_MODE_OUT_LOW 3 +#define LED_MODE_LINK 4 +#define LED_MODE_SPEED 5 +#define LED_MODE_DUPLEX 6 +#define LED_MODE_ACT 7 +#define LED_MODE_COLL 8 +#define LED_MODE_LINK_ACT 9 +#define LED_MODE_DUPLEX_COLL 10 +#define LED_MODE_10M_ACT 11 +#define LED_MODE_100M_ACT 12 +#define LED0_MODE_SHIFT 0 /* LED0 mode shift */ +#define LED1_MODE_SHIFT 4 /* LED1 mode shift */ +#define LED2_MODE_SHIFT 8 /* LED2 mode shift */ +#define LED0_IV_SHIFT 12 /* LED0 input value shift */ +#define LED1_IV_SHIFT 13 /* LED1 input value shift */ +#define LED2_IV_SHIFT 14 /* LED2 input value shift */ + +#endif /* _MACH_ADM5120_SWITCH_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h new file mode 100644 index 0000000000..81d3067da3 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/adm5120_uart.h @@ -0,0 +1,64 @@ +/* + * ADM5120 UART definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in UARTs. + * + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MACH_ADM5120_UART_H +#define _MACH_ADM5120_UART_H + +#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1) + +#define UART_REG_DATA 0x00 +#define UART_REG_RSR 0x04 +#define UART_REG_ECR UART_REG_RSR +#define UART_REG_LCRH 0x08 +#define UART_REG_LCRM 0x0C +#define UART_REG_LCRL 0x10 +#define UART_REG_CTRL 0x14 +#define UART_REG_FLAG 0x18 + +/* Receive Status Register bits */ +#define UART_RSR_FE (1 << 0) +#define UART_RSR_PE (1 << 1) +#define UART_RSR_BE (1 << 2) +#define UART_RSR_OE (1 << 3) +#define UART_RSR_ERR (UART_RSR_FE | UART_RSR_PE | UART_RSR_BE) + +#define UART_ECR_ALL 0xFF + +/* Line Control High register bits */ +#define UART_LCRH_BRK (1 << 0) /* send break */ +#define UART_LCRH_PEN (1 << 1) /* parity enable */ +#define UART_LCRH_EPS (1 << 2) /* even parity select */ +#define UART_LCRH_STP1 (0 << 3) /* one stop bits select */ +#define UART_LCRH_STP2 (1 << 3) /* two stop bits select */ +#define UART_LCRH_FEN (1 << 4) /* FIFO enable */ + +#define UART_LCRH_WLEN5 (0 << 5) +#define UART_LCRH_WLEN6 (1 << 5) +#define UART_LCRH_WLEN7 (2 << 5) +#define UART_LCRH_WLEN8 (3 << 5) + +/* Control register bits */ +#define UART_CTRL_EN (1 << 0) + +/* Flag register bits */ +#define UART_FLAG_CTS (1 << 0) +#define UART_FLAG_DSR (1 << 1) +#define UART_FLAG_DCD (1 << 2) +#define UART_FLAG_BUSY (1 << 3) +#define UART_FLAG_RXFE (1 << 4) +#define UART_FLAG_TXFF (1 << 5) +#define UART_FLAG_RXFF (1 << 6) +#define UART_FLAG_TXFE (1 << 7) + +#endif /* _MACH_ADM5120_UART_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h new file mode 100644 index 0000000000..503843db15 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/asm/sizes.h @@ -0,0 +1,56 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* DO NOT EDIT!! - this file automatically generated + * from .s file by awk -f s2h.awk + */ +/* Size definitions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_16 0x00000010 +#define SZ_256 0x00000100 +#define SZ_512 0x00000200 + +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif + +/* END */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h new file mode 100644 index 0000000000..c6310cc6e6 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/cpu-feature-overrides.h @@ -0,0 +1,71 @@ +/* + * ADM5120 specific CPU feature overrides + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H + +/* + * The ADM5120 SOC has a built-in MIPS 4Kc core. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 +/* #define cpu_has_vce ? */ +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +#define cpu_has_prefetch 1 +/* #define cpu_has_mcheck ? */ +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +/* #define cpu_has_pindexed_dcache ? */ + +/* #define cpu_icache_snoops_remote_store ? */ + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +/* #define cpu_has_nofpuex ? */ +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +/* #define cpu_has_inclusive_pcaches ? */ + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 + +#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h new file mode 100644 index 0000000000..7ba7efca1f --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/gpio.h @@ -0,0 +1,115 @@ +/* + * ADM5120 GPIO wrappers for arch-neutral GPIO calls + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ASM_MIPS_MACH_ADM5120_GPIO_H +#define _ASM_MIPS_MACH_ADM5120_GPIO_H + +#define ARCH_NR_GPIOS 64 + +#include + +#include + +#define ADM5120_GPIO_PIN0 0 +#define ADM5120_GPIO_PIN1 1 +#define ADM5120_GPIO_PIN2 2 +#define ADM5120_GPIO_PIN3 3 +#define ADM5120_GPIO_PIN4 4 +#define ADM5120_GPIO_PIN5 5 +#define ADM5120_GPIO_PIN6 6 +#define ADM5120_GPIO_PIN7 7 +#define ADM5120_GPIO_P0L0 8 +#define ADM5120_GPIO_P0L1 9 +#define ADM5120_GPIO_P0L2 10 +#define ADM5120_GPIO_P1L0 11 +#define ADM5120_GPIO_P1L1 12 +#define ADM5120_GPIO_P1L2 13 +#define ADM5120_GPIO_P2L0 14 +#define ADM5120_GPIO_P2L1 15 +#define ADM5120_GPIO_P2L2 16 +#define ADM5120_GPIO_P3L0 17 +#define ADM5120_GPIO_P3L1 18 +#define ADM5120_GPIO_P3L2 19 +#define ADM5120_GPIO_P4L0 20 +#define ADM5120_GPIO_P4L1 21 +#define ADM5120_GPIO_P4L2 22 +#define ADM5120_GPIO_MAX 22 +#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1 + +#define ADM5120_GPIO_LOW 0 +#define ADM5120_GPIO_HIGH 1 + +#define ADM5120_GPIO_SWITCH 0x10 +#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH) +#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK) +#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED) +#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX) +#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT) +#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL) +#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT) +#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL) +#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT) +#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT) + +extern int __adm5120_gpio0_get_value(unsigned gpio); +extern void __adm5120_gpio0_set_value(unsigned gpio, int value); +extern int __adm5120_gpio1_get_value(unsigned gpio); +extern void __adm5120_gpio1_set_value(unsigned gpio, int value); +extern int adm5120_gpio_to_irq(unsigned gpio); +extern int adm5120_irq_to_gpio(unsigned irq); + +static inline int gpio_get_value(unsigned gpio) +{ + int ret; + + switch (gpio) { + case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7: + ret = __adm5120_gpio0_get_value(gpio); + break; + case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2: + ret = __adm5120_gpio1_get_value(gpio - ADM5120_GPIO_P0L0); + break; + default: + ret = __gpio_get_value(gpio); + break; + } + + return ret; +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + switch (gpio) { + case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7: + __adm5120_gpio0_set_value(gpio, value); + break; + case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2: + __adm5120_gpio1_set_value(gpio - ADM5120_GPIO_P0L0, value); + break; + default: + __gpio_set_value(gpio, value); + break; + } +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return adm5120_gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned irq) +{ + return adm5120_irq_to_gpio(irq); +} + +#define gpio_cansleep __gpio_cansleep + +#endif /* _ASM_MIPS_MACH_ADM5120_GPIO_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h new file mode 100644 index 0000000000..b0350c8b83 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/irq.h @@ -0,0 +1,43 @@ +/* + * ADM5120 specific IRQ numbers + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef _ASM_MIPS_MACH_ADM5120_IRQ_H +#define _ASM_MIPS_MACH_ADM5120_IRQ_H + +#define MIPS_CPU_IRQ_BASE 0 +#define NR_IRQS 24 + +#include_next + +#include + +#define NO_IRQ (-1) + +#define MIPS_CPU_IRQ_COUNT 8 +#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x)) + +#define ADM5120_INTC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_IRQ_COUNT) +#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x)) + +#define ADM5120_IRQ_INTC MIPS_CPU_IRQ(2) +#define ADM5120_IRQ_COUNTER MIPS_CPU_IRQ(7) + +#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER) +#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0) +#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1) +#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC) +#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2) +#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4) +#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0) +#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1) +#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2) +#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH) + +#endif /* _ASM_MIPS_MACH_ADM5120_IRQ_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h new file mode 100644 index 0000000000..fa42bf7148 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/admboot.h @@ -0,0 +1,17 @@ +/* + * ADMBoot specific definitions + * + * Copyright (C) 2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ADMBOOT_H +#define _ADMBOOT_H + +extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init; + +#endif /* _ADMBOOT_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h new file mode 100644 index 0000000000..0cb3eee70e --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/cfe.h @@ -0,0 +1,18 @@ +/* + * Broadcom's CFE definitions + * + * Copyright (C) 2006-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _PROM_CFE_H_ +#define _PROM_CFE_H_ + +extern int cfe_present(void) __init; +extern char *cfe_getenv(char *); + +#endif /*_PROM_CFE_H_*/ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h new file mode 100644 index 0000000000..778df24677 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/generic.h @@ -0,0 +1,18 @@ +/* + * Generic prom definitions + * + * Copyright (C) 2006-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _PROM_GENERIC_H_ +#define _PROM_GENERIC_H_ + +extern int generic_prom_present(void) __init; +extern char *generic_prom_getenv(char *); + +#endif /*_PROM_GENERIC_H_*/ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h new file mode 100644 index 0000000000..ea8db81ed3 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/myloader.h @@ -0,0 +1,179 @@ +/* + * Compex's MyLoader specific definitions + * + * Copyright (C) 2006-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _MYLOADER_H_ +#define _MYLOADER_H_ + +/* + * Firmware file format: + * + *
+ * [] + * ... + * [] + * + * [] + * ... + * [] + * + * + */ + +/* Myloader specific magic numbers */ +#define MYLO_MAGIC_FIRMWARE 0x4C594D00 +#define MYLO_MAGIC_20021103 0x20021103 +#define MYLO_MAGIC_20021107 0x20021107 + +#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 +#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 +#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 + +/* + * Addresses of the data structures provided by MyLoader + */ +#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ +#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ +#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ +#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ + +/* Vendor ID's (seems to be same as the PCI vendor ID's) */ +#define VENID_COMPEX 0x11F6 + +/* Devices based on the ADM5120 */ +#define DEVID_COMPEX_NP27G 0x0078 +#define DEVID_COMPEX_NP28G 0x044C +#define DEVID_COMPEX_NP28GHS 0x044E +#define DEVID_COMPEX_WP54Gv1C 0x0514 +#define DEVID_COMPEX_WP54G 0x0515 +#define DEVID_COMPEX_WP54AG 0x0546 +#define DEVID_COMPEX_WPP54AG 0x0550 +#define DEVID_COMPEX_WPP54G 0x0555 + +/* Devices based on the IXP422 */ +#define DEVID_COMPEX_WP18 0x047E +#define DEVID_COMPEX_NP18A 0x0489 + +/* Other devices */ +#define DEVID_COMPEX_NP26G8M 0x03E8 +#define DEVID_COMPEX_NP26G16M 0x03E9 + +struct mylo_fw_header { + uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ + uint32_t crc; /* CRC of the whole firmware */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint16_t vid; /* vendor ID */ + uint16_t did; /* device ID */ + uint16_t svid; /* sub vendor ID */ + uint16_t sdid; /* sub device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; /* FIXME: firmware version high? */ + uint32_t fwlo; /* FIXME: firmware version low? */ + uint32_t flags; /* firmware flags */ +}; + +#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ +#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ + +struct mylo_fw_blockdesc { + uint32_t type; /* block type */ + uint32_t addr; /* relative address to flash start */ + uint32_t dlen; /* size of block data in bytes */ + uint32_t blen; /* total size of block in bytes */ +}; + +#define FW_DESC_TYPE_UNUSED 0 +#define FW_DESC_TYPE_USED 1 + +struct mylo_partition { + uint16_t flags; /* partition flags */ + uint16_t type; /* type of the partition */ + uint32_t addr; /* relative address of the partition from the + flash start */ + uint32_t size; /* size of the partition in bytes */ + uint32_t param; /* if this is the active partition, the + MyLoader load code to this address */ +}; + +#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, + * MyLoader loads firmware from here */ +#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ +#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ +#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM + * before decompression */ +#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ + +#define PARTITION_TYPE_FREE 0 +#define PARTITION_TYPE_USED 1 + +#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the + partition table */ + +struct mylo_partition_table { + uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint32_t res2; /* unknown/unused */ + struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; +}; + +struct mylo_partition_header { + uint32_t len; /* length of the partition data */ + uint32_t crc; /* CRC value of the partition data */ +}; + +struct mylo_system_params { + uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t mylo_ver; + uint16_t vid; /* Vendor ID */ + uint16_t did; /* Device ID */ + uint16_t svid; /* Sub Vendor ID */ + uint16_t sdid; /* Sub Device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; + uint32_t fwlo; + uint32_t tftp_addr; + uint32_t prog_start; + uint32_t flash_size; /* Size of boot FLASH in bytes */ + uint32_t dram_size; /* Size of onboard RAM in bytes */ +}; + + +struct mylo_eth_addr { + uint8_t mac[6]; + uint8_t csum[2]; +}; + +#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address + in the board parameters */ + +struct mylo_board_params { + uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t res2; + struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; +}; + +struct myloader_info { + u32 vid; + u32 did; + u32 svid; + u32 sdid; + uint8_t macs[MYLO_ETHADDR_COUNT][6]; +}; + +extern struct myloader_info myloader_info; +extern int myloader_present(void) __init; + +#endif /* _MYLOADER_H_*/ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h new file mode 100644 index 0000000000..91ac05a630 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/routerboot.h @@ -0,0 +1,36 @@ +/* + * Mikrotik's RouterBOOT definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _PROM_ROUTERBOOT_H_ +#define _PROM_ROUTERBOOT_H_ + +struct rb_bios_settings { + u32 hs_offs; /* hard settings offset */ + u32 hs_size; /* hard settings size */ + u32 fw_offs; /* firmware offset */ + u32 ss_offs; /* soft settings offset */ + u32 ss_size; /* soft settings size */ +}; + +struct rb_hard_settings { + char *name; /* board name */ + char *bios_ver; /* BIOS version */ + u32 mem_size; /* memory size in bytes */ + u32 mac_count; /* number of mac addresses */ + u8 *mac_base; /* mac address base */ +}; + +extern int routerboot_present(void) __init; +extern char *routerboot_get_boardname(void); + +extern struct rb_hard_settings rb_hs; + +#endif /* _PROM_ROUTERBOOT_H_ */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h new file mode 100644 index 0000000000..d1e3e5b941 --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/prom/zynos.h @@ -0,0 +1,86 @@ +/* + * ZyNOS (ZyXEL's Networking OS) definitions + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef _ZYNOS_H +#define _ZYNOS_H + +#define ZYNOS_NAME_LEN 32 +#define ZYNOS_FEAT_BYTES 22 +#define ZYNOS_MAC_LEN 6 + +struct zynos_board_info { + unsigned char vendor[ZYNOS_NAME_LEN]; + unsigned char product[ZYNOS_NAME_LEN]; + u32 bootext_addr; + u32 res0; + u16 board_id; + u8 res1[6]; + u8 feat_other[ZYNOS_FEAT_BYTES]; + u8 feat_main; + u8 res2; + u8 mac[ZYNOS_MAC_LEN]; + u8 country; + u8 dbgflag; +} __attribute__ ((packed)); + +/* + * Vendor IDs + */ +#define ZYNOS_VENDOR_ID_ZYXEL 0 +#define ZYNOS_VENDOR_ID_NETGEAR 1 +#define ZYNOS_VENDOR_ID_DLINK 2 +#define ZYNOS_VENDOR_ID_OTHER 3 +#define ZYNOS_VENDOR_ID_LUCENT 4 + +/* + * Vendor names + */ +#define ZYNOS_VENDOR_DLINK "D-Link" +#define ZYNOS_VENDOR_LUCENT "LUCENT" +#define ZYNOS_VENDOR_NETGEAR "NetGear" +#define ZYNOS_VENDOR_ZYXEL "ZyXEL" + +/* + * Board IDs (big-endian) + */ +#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */ +#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */ +#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */ +#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */ +#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */ +#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */ +#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */ +#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */ +#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */ +#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */ +#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */ +#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */ +#define ZYNOS_BOARD_P334WT_ALT 0x9F02 /* Prestige 334WT alternative*/ +#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */ +#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */ +#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */ + +/* + * Some magic numbers (big-endian) + */ +#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */ +#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */ + +struct bootbase_info { + u16 vendor_id; + u16 board_id; + u8 mac[6]; +}; + +extern struct bootbase_info bootbase_info; +extern int bootbase_present(void) __init; + +#endif /* _ZYNOS_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h new file mode 100644 index 0000000000..87c35f375b --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/include/asm/mach-adm5120/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H +#define __ASM_MIPS_MACH_ADM5120_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */ diff --git a/target/linux/adm5120/files-3.18/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120/files-3.18/arch/mips/pci/pci-adm5120.c new file mode 100644 index 0000000000..f8d359806a --- /dev/null +++ b/target/linux/adm5120/files-3.18/arch/mips/pci/pci-adm5120.c @@ -0,0 +1,277 @@ +/* + * ADM5120 PCI Host Controller driver + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel + * done by Jeroen Vreeken + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * + * Jeroen's code was based on the Linux 2.4.xx source codes found in various + * tarballs released by Edimax for it's ADM5120 based devices + * Copyright (C) ADMtek Incorporated + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include +#include +#include + +#undef DEBUG + +#ifdef DEBUG +#define DBG(f, a...) printk(KERN_DEBUG f, ## a) +#else +#define DBG(f, a...) do {} while (0) +#endif + +#define PCI_ENABLE 0x80000000 + +/* -------------------------------------------------------------------------*/ + +static unsigned int adm5120_pci_nr_irqs __initdata; +static struct adm5120_pci_irq *adm5120_pci_irq_map __initdata; + +static DEFINE_SPINLOCK(pci_lock); + +/* -------------------------------------------------------------------------*/ + +static inline void write_cfgaddr(u32 addr) +{ + __raw_writel((addr | PCI_ENABLE), + (void __iomem *)(KSEG1ADDR(ADM5120_PCICFG_ADDR))); +} + +static inline void write_cfgdata(u32 data) +{ + __raw_writel(data, (void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA)); +} + +static inline u32 read_cfgdata(void) +{ + return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA)); +} + +static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where) +{ + return ((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \ + (where & 0xFC); +} + +/* -------------------------------------------------------------------------*/ + +static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + unsigned long flags; + u32 data; + + spin_lock_irqsave(&pci_lock, flags); + + write_cfgaddr(mkaddr(bus, devfn, where)); + data = read_cfgdata(); + + DBG("PCI: cfg_read %02u.%02u.%01u/%02X:%01d, cfg:0x%08X", + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), + where, size, data); + + switch (size) { + case 1: + if (where & 1) + data >>= 8; + if (where & 2) + data >>= 16; + data &= 0xFF; + break; + case 2: + if (where & 2) + data >>= 16; + data &= 0xFFFF; + break; + } + + *val = data; + DBG(", 0x%08X returned\n", data); + + spin_unlock_irqrestore(&pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + unsigned long flags; + u32 data; + int s; + + spin_lock_irqsave(&pci_lock, flags); + + write_cfgaddr(mkaddr(bus, devfn, where)); + data = read_cfgdata(); + + DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X", + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), + where, size, data); + + switch (size) { + case 1: + s = ((where & 3) << 3); + data &= ~(0xFF << s); + data |= ((val & 0xFF) << s); + break; + case 2: + s = ((where & 2) << 4); + data &= ~(0xFFFF << s); + data |= ((val & 0xFFFF) << s); + break; + case 4: + data = val; + break; + } + + write_cfgdata(data); + DBG(", 0x%08X written\n", data); + + spin_unlock_irqrestore(&pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops adm5120_pci_ops = { + .read = pci_config_read, + .write = pci_config_write, +}; + +/* -------------------------------------------------------------------------*/ + +static void adm5120_pci_fixup(struct pci_dev *dev) +{ + if (dev->devfn != 0) + return; + + /* setup COMMAND register */ + pci_write_config_word(dev, PCI_COMMAND, + (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER)); + + /* setup CACHE_LINE_SIZE register */ + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4); + + /* setup BARS */ + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120, + adm5120_pci_fixup); + +/* -------------------------------------------------------------------------*/ + +void __init adm5120_pci_set_irq_map(unsigned int nr_irqs, + struct adm5120_pci_irq *map) +{ + adm5120_pci_nr_irqs = nr_irqs; + adm5120_pci_irq_map = map; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = -1; + int i; + + if ((!adm5120_pci_nr_irqs) || (!adm5120_pci_irq_map)) { + printk(KERN_ALERT "PCI: pci_irq_map is not initialized\n"); + goto out; + } + + if (slot < 1 || slot > 4) { + printk(KERN_ALERT "PCI: slot number %u is not supported\n", + slot); + goto out; + } + + for (i = 0; i < adm5120_pci_nr_irqs; i++) { + if ((adm5120_pci_irq_map[i].slot == slot) + && (adm5120_pci_irq_map[i].func == PCI_FUNC(dev->devfn)) + && (adm5120_pci_irq_map[i].pin == pin)) { + irq = adm5120_pci_irq_map[i].irq; + break; + } + } + + if (irq < 0) { + printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n", + pci_name((struct pci_dev *)dev), pin); + } else { + printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n", + pci_name((struct pci_dev *)dev), pin, irq); + } + +out: + return irq; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +/* -------------------------------------------------------------------------*/ + +static struct resource pci_io_resource = { + .name = "ADM5120 PCI I/O", + .start = ADM5120_PCIIO_BASE, + .end = ADM5120_PCICFG_ADDR-1, + .flags = IORESOURCE_IO +}; + +static struct resource pci_mem_resource = { + .name = "ADM5120 PCI MEM", + .start = ADM5120_PCIMEM_BASE, + .end = ADM5120_PCIIO_BASE-1, + .flags = IORESOURCE_MEM +}; + +static struct pci_controller adm5120_controller = { + .pci_ops = &adm5120_pci_ops, + .io_resource = &pci_io_resource, + .mem_resource = &pci_mem_resource, +}; + +static int __init adm5120_pci_setup(void) +{ + if (adm5120_package_pqfp()) { + printk(KERN_INFO "PCI: not available on ADM5120P\n"); + return -1; + } + + /* Avoid ISA compat ranges. */ + PCIBIOS_MIN_IO = 0x00000000; + PCIBIOS_MIN_MEM = 0x00000000; + + /* Set I/O resource limits. */ + ioport_resource.end = 0x1fffffff; + iomem_resource.end = 0xffffffff; + + register_pci_controller(&adm5120_controller); + return 0; +} + +arch_initcall(adm5120_pci_setup); diff --git a/target/linux/adm5120/files-3.18/drivers/ata/pata_rb153_cf.c b/target/linux/adm5120/files-3.18/drivers/ata/pata_rb153_cf.c new file mode 100644 index 0000000000..92a4d1390d --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/ata/pata_rb153_cf.c @@ -0,0 +1,267 @@ +/* + * A low-level PATA driver to handle a Compact Flash connected on the + * Mikrotik's RouterBoard 153 board. + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was based on: drivers/ata/pata_ixp4xx_cf.c + * Copyright (C) 2006-07 Tower Technologies + * Author: Alessandro Zummo + * + * Also was based on the driver for Linux 2.4.xx published by Mikrotik for + * their RouterBoard 1xx and 5xx series devices. The original Mikrotik code + * seems not to have a license. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRV_NAME "pata-rb153-cf" +#define DRV_VERSION "0.5.0" +#define DRV_DESC "PATA driver for RouterBOARD 153 Compact Flash" + +#define RB153_CF_MAXPORTS 1 +#define RB153_CF_IO_DELAY 100 + +#define RB153_CF_REG_CMD 0x0800 +#define RB153_CF_REG_CTRL 0x080E +#define RB153_CF_REG_DATA 0x0C00 + +struct rb153_cf_info { + void __iomem *iobase; + unsigned int gpio_line; + int frozen; + unsigned int irq; +}; + +static inline void rb153_pata_finish_io(struct ata_port *ap) +{ + struct rb153_cf_info *info = ap->host->private_data; + + /* FIXME: Keep previous delay. If this is merely a fence then + * ata_sff_sync might be sufficient. */ + ata_sff_dma_pause(ap); + ndelay(RB153_CF_IO_DELAY); + + irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); +} + +static void rb153_pata_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + writeb(tf->command, ap->ioaddr.command_addr); + rb153_pata_finish_io(ap); +} + +static unsigned int rb153_pata_data_xfer(struct ata_device *adev, + unsigned char *buf, + unsigned int buflen, + int write_data) +{ + void __iomem *ioaddr = adev->link->ap->ioaddr.data_addr; + unsigned int t; + + t = buflen; + if (write_data) { + for (; t > 0; t--, buf++) + writeb(*buf, ioaddr); + } else { + for (; t > 0; t--, buf++) + *buf = readb(ioaddr); + } + + rb153_pata_finish_io(adev->link->ap); + return buflen; +} + +static void rb153_pata_freeze(struct ata_port *ap) +{ + struct rb153_cf_info *info = ap->host->private_data; + + info->frozen = 1; +} + +static void rb153_pata_thaw(struct ata_port *ap) +{ + struct rb153_cf_info *info = ap->host->private_data; + + info->frozen = 0; +} + +static irqreturn_t rb153_pata_irq_handler(int irq, void *dev_instance) +{ + struct ata_host *ah = dev_instance; + struct rb153_cf_info *info = ah->private_data; + + if (gpio_get_value(info->gpio_line)) { + irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW); + if (!info->frozen) + ata_sff_interrupt(irq, dev_instance); + } else { + irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); + } + + return IRQ_HANDLED; +} + +static struct ata_port_operations rb153_pata_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_exec_command = rb153_pata_exec_command, + .sff_data_xfer = rb153_pata_data_xfer, + .freeze = rb153_pata_freeze, + .thaw = rb153_pata_thaw, +}; + +static struct scsi_host_template rb153_pata_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static void rb153_pata_setup_port(struct ata_host *ah) +{ + struct rb153_cf_info *info = ah->private_data; + struct ata_port *ap; + + ap = ah->ports[0]; + + ap->ops = &rb153_pata_port_ops; + ap->pio_mask = 0x1f; /* PIO4 */ + + ap->ioaddr.cmd_addr = info->iobase + RB153_CF_REG_CMD; + ap->ioaddr.ctl_addr = info->iobase + RB153_CF_REG_CTRL; + ap->ioaddr.altstatus_addr = info->iobase + RB153_CF_REG_CTRL; + + ata_sff_std_ports(&ap->ioaddr); + + ap->ioaddr.data_addr = info->iobase + RB153_CF_REG_DATA; +} + +static int rb153_pata_driver_probe(struct platform_device *pdev) +{ + unsigned int irq; + int gpio; + struct resource *res; + struct ata_host *ah; + struct rb153_cf_info *info; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no IOMEM resource found\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, "no IRQ resource found\n"); + return -ENOENT; + } + + gpio = irq_to_gpio(irq); + if (gpio < 0) { + dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq); + return -ENOENT; + } + + ret = gpio_request(gpio, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, "GPIO request failed\n"); + return ret; + } + + ah = ata_host_alloc(&pdev->dev, RB153_CF_MAXPORTS); + if (!ah) + return -ENOMEM; + + platform_set_drvdata(pdev, ah); + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + ah->private_data = info; + info->gpio_line = gpio; + info->irq = irq; + + info->iobase = devm_ioremap_nocache(&pdev->dev, res->start, + res->end - res->start + 1); + if (!info->iobase) + return -ENOMEM; + + ret = gpio_direction_input(gpio); + if (ret) { + dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n", + ret); + goto err_free_gpio; + } + + rb153_pata_setup_port(ah); + + ret = ata_host_activate(ah, irq, rb153_pata_irq_handler, + IRQF_TRIGGER_LOW, &rb153_pata_sht); + if (ret) + goto err_free_gpio; + + return 0; + +err_free_gpio: + gpio_free(gpio); + + return ret; +} + +static int rb153_pata_driver_remove(struct platform_device *pdev) +{ + struct ata_host *ah = platform_get_drvdata(pdev); + struct rb153_cf_info *info = ah->private_data; + + ata_host_detach(ah); + gpio_free(info->gpio_line); + + return 0; +} + +static struct platform_driver rb153_pata_platform_driver = { + .probe = rb153_pata_driver_probe, + .remove = rb153_pata_driver_remove, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +/* ------------------------------------------------------------------------ */ + +#define DRV_INFO DRV_DESC " version " DRV_VERSION + +static int __init rb153_pata_module_init(void) +{ + printk(KERN_INFO DRV_INFO "\n"); + + return platform_driver_register(&rb153_pata_platform_driver); +} + +static void __exit rb153_pata_module_exit(void) +{ + platform_driver_unregister(&rb153_pata_platform_driver); +} + +MODULE_AUTHOR("Gabor Juhos "); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL v2"); + +module_init(rb153_pata_module_init); +module_exit(rb153_pata_module_exit); diff --git a/target/linux/adm5120/files-3.18/drivers/leds/ledtrig-adm5120-switch.c b/target/linux/adm5120/files-3.18/drivers/leds/ledtrig-adm5120-switch.c new file mode 100644 index 0000000000..23a54a0b9a --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/leds/ledtrig-adm5120-switch.c @@ -0,0 +1,149 @@ +/* + * LED ADM5120 Switch Port State Trigger + * + * Copyright (C) 2007 Bernhard Held + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was based on: drivers/leds/ledtrig-timer.c + * Copyright 2005-2006 Openedhand Ltd. + * Author: Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include + +#include "leds.h" + +#define DRV_NAME "port_state" +#define DRV_DESC "LED ADM5120 Switch Port State Trigger" + +struct port_state { + char *name; + unsigned int value; +}; + +#define PORT_STATE(n, v) {.name = (n), .value = (v)} + +static struct port_state port_states[] = { + PORT_STATE("off", LED_OFF), + PORT_STATE("on", LED_FULL), + PORT_STATE("flash", ADM5120_GPIO_FLASH), + PORT_STATE("link", ADM5120_GPIO_LINK), + PORT_STATE("speed", ADM5120_GPIO_SPEED), + PORT_STATE("duplex", ADM5120_GPIO_DUPLEX), + PORT_STATE("act", ADM5120_GPIO_ACT), + PORT_STATE("coll", ADM5120_GPIO_COLL), + PORT_STATE("link_act", ADM5120_GPIO_LINK_ACT), + PORT_STATE("duplex_coll", ADM5120_GPIO_DUPLEX_COLL), + PORT_STATE("10M_act", ADM5120_GPIO_10M_ACT), + PORT_STATE("100M_act", ADM5120_GPIO_100M_ACT), +}; + +static ssize_t led_port_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct port_state *state = led_cdev->trigger_data; + int len = 0; + int i; + + *buf = '\0'; + for (i = 0; i < ARRAY_SIZE(port_states); i++) { + if (&port_states[i] == state) + len += sprintf(buf+len, "[%s] ", port_states[i].name); + else + len += sprintf(buf+len, "%s ", port_states[i].name); + } + len += sprintf(buf+len, "\n"); + + return len; +} + +static ssize_t led_port_state_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + size_t len; + int i; + + for (i = 0; i < ARRAY_SIZE(port_states); i++) { + len = strlen(port_states[i].name); + if (strncmp(port_states[i].name, buf, len) != 0) + continue; + + if (buf[len] != '\0' && buf[len] != '\n') + continue; + + led_cdev->trigger_data = &port_states[i]; + led_set_brightness(led_cdev, port_states[i].value); + return size; + } + + return -EINVAL; +} + +static DEVICE_ATTR(port_state, 0644, led_port_state_show, + led_port_state_store); + +static void adm5120_switch_trig_activate(struct led_classdev *led_cdev) +{ + struct port_state *state = port_states; + int rc; + + led_cdev->trigger_data = state; + + rc = device_create_file(led_cdev->dev, &dev_attr_port_state); + if (rc) + goto err; + + led_set_brightness(led_cdev, state->value); + + return; +err: + led_cdev->trigger_data = NULL; +} + +static void adm5120_switch_trig_deactivate(struct led_classdev *led_cdev) +{ + struct port_state *state = led_cdev->trigger_data; + + if (!state) + return; + + device_remove_file(led_cdev->dev, &dev_attr_port_state); + +} + +static struct led_trigger adm5120_switch_led_trigger = { + .name = DRV_NAME, + .activate = adm5120_switch_trig_activate, + .deactivate = adm5120_switch_trig_deactivate, +}; + +static int __init adm5120_switch_trig_init(void) +{ + led_trigger_register(&adm5120_switch_led_trigger); + return 0; +} + +static void __exit adm5120_switch_trig_exit(void) +{ + led_trigger_unregister(&adm5120_switch_led_trigger); +} + +module_init(adm5120_switch_trig_init); +module_exit(adm5120_switch_trig_exit); + +MODULE_AUTHOR("Bernhard Held , " + "Gabor Juhos "); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL v2"); diff --git a/target/linux/adm5120/files-3.18/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120/files-3.18/drivers/mtd/maps/adm5120-flash.c new file mode 100644 index 0000000000..f6a86f4897 --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/mtd/maps/adm5120-flash.c @@ -0,0 +1,482 @@ +/* + * Platform driver for NOR flash devices on ADM5120 based boards + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: drivers/mtd/map/physmap.c + * Copyright (C) 2003 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#define DRV_NAME "adm5120-flash" +#define DRV_DESC "ADM5120 flash MAP driver" +#define MAX_PARSED_PARTS 8 + +#ifdef ADM5120_FLASH_DEBUG +#define MAP_DBG(m, f, a...) printk(KERN_INFO "%s: " f, (m->name) , ## a) +#else +#define MAP_DBG(m, f, a...) do {} while (0) +#endif +#define MAP_ERR(m, f, a...) printk(KERN_ERR "%s: " f, (m->name) , ## a) +#define MAP_INFO(m, f, a...) printk(KERN_INFO "%s: " f, (m->name) , ## a) + +struct adm5120_map_info { + struct map_info map; + void (*switch_bank)(unsigned); + unsigned long window_size; +}; + +struct adm5120_flash_info { + struct mtd_info *mtd; + struct resource *res; + struct platform_device *dev; + struct adm5120_map_info amap; +}; + +struct flash_desc { + u32 phys; + u32 srs_shift; +}; + +/* + * Globals + */ +static DEFINE_SPINLOCK(adm5120_flash_spin); +#define FLASH_LOCK() spin_lock(&adm5120_flash_spin) +#define FLASH_UNLOCK() spin_unlock(&adm5120_flash_spin) + +static u32 flash_bankwidths[4] = { 1, 2, 4, 0 }; + +static u32 flash_sizes[8] = { + 0, 512*1024, 1024*1024, 2*1024*1024, + 4*1024*1024, 0, 0, 0 +}; + +static struct flash_desc flash_descs[2] = { + { + .phys = ADM5120_SRAM0_BASE, + .srs_shift = MEMCTRL_SRS0_SHIFT, + }, { + .phys = ADM5120_SRAM1_BASE, + .srs_shift = MEMCTRL_SRS1_SHIFT, + } +}; + +static const char const *probe_types[] = { + "cfi_probe", + "jedec_probe", + "map_rom", + NULL +}; + +static const char const *parse_types[] = { + "cmdlinepart", +#ifdef CONFIG_MTD_REDBOOT_PARTS + "RedBoot", +#endif +#ifdef CONFIG_MTD_MYLOADER_PARTS + "MyLoader", +#endif + NULL, +}; + +#define BANK_SIZE (2<<20) +#define BANK_SIZE_MAX (4<<20) +#define BANK_OFFS_MASK (BANK_SIZE-1) +#define BANK_START_MASK (~BANK_OFFS_MASK) + +static inline struct adm5120_map_info *map_to_amap(struct map_info *map) +{ + return (struct adm5120_map_info *)map; +} + +static void adm5120_flash_switchbank(struct map_info *map, + unsigned long ofs) +{ + struct adm5120_map_info *amap = map_to_amap(map); + unsigned bank; + + if (amap->switch_bank == NULL) + return; + + bank = (ofs & BANK_START_MASK) >> 21; + if (bank > 1) + BUG(); + + MAP_DBG(map, "switching to bank %u, ofs=%lX\n", bank, ofs); + amap->switch_bank(bank); +} + +static map_word adm5120_flash_read(struct map_info *map, unsigned long ofs) +{ + struct adm5120_map_info *amap = map_to_amap(map); + map_word ret; + + MAP_DBG(map, "reading from ofs %lX\n", ofs); + + if (ofs >= amap->window_size) + return map_word_ff(map); + + FLASH_LOCK(); + adm5120_flash_switchbank(map, ofs); + ret = inline_map_read(map, (ofs & (amap->window_size-1))); + FLASH_UNLOCK(); + + return ret; +} + +static void adm5120_flash_write(struct map_info *map, const map_word datum, + unsigned long ofs) +{ + struct adm5120_map_info *amap = map_to_amap(map); + + MAP_DBG(map, "writing to ofs %lX\n", ofs); + + if (ofs > amap->window_size) + return; + + FLASH_LOCK(); + adm5120_flash_switchbank(map, ofs); + inline_map_write(map, datum, (ofs & (amap->window_size-1))); + FLASH_UNLOCK(); +} + +static void adm5120_flash_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) +{ + struct adm5120_map_info *amap = map_to_amap(map); + char *p; + ssize_t t; + + MAP_DBG(map, "copy_from, to=%lX, from=%lX, len=%lX\n", + (unsigned long)to, from, (unsigned long)len); + + if (from > amap->window_size) + return; + + p = (char *)to; + while (len > 0) { + t = len; + if ((from < BANK_SIZE) && ((from+len) > BANK_SIZE)) + t = BANK_SIZE-from; + + FLASH_LOCK(); + MAP_DBG(map, "copying %lu byte(s) from %lX to %lX\n", + (unsigned long)t, (from & (amap->window_size-1)), + (unsigned long)p); + adm5120_flash_switchbank(map, from); + inline_map_copy_from(map, p, (from & (amap->window_size-1)), t); + FLASH_UNLOCK(); + p += t; + from += t; + len -= t; + } +} + +static int adm5120_flash_initres(struct adm5120_flash_info *info) +{ + struct map_info *map = &info->amap.map; + int err = 0; + + info->res = request_mem_region(map->phys, info->amap.window_size, + map->name); + if (info->res == NULL) { + MAP_ERR(map, "could not reserve memory region\n"); + err = -ENOMEM; + goto out; + } + + map->virt = ioremap_nocache(map->phys, info->amap.window_size); + if (map->virt == NULL) { + MAP_ERR(map, "failed to ioremap flash region\n"); + err = -ENOMEM; + goto out; + } + +out: + return err; +} + +static int adm5120_flash_initinfo(struct adm5120_flash_info *info, + struct platform_device *dev) +{ + struct map_info *map = &info->amap.map; + struct adm5120_flash_platform_data *pdata = dev->dev.platform_data; + struct flash_desc *fdesc; + u32 t = 0; + + map->name = dev_name(&dev->dev); + + if (dev->id > 1) { + MAP_ERR(map, "invalid flash id\n"); + goto err_out; + } + + fdesc = &flash_descs[dev->id]; + + if (pdata) + info->amap.window_size = pdata->window_size; + + if (info->amap.window_size == 0) { + /* get memory window size */ + t = SW_READ_REG(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift; + t &= MEMCTRL_SRS_MASK; + info->amap.window_size = flash_sizes[t]; + } + + if (info->amap.window_size == 0) { + MAP_ERR(map, "unable to determine window size\n"); + goto err_out; + } + + /* get flash bus width */ + switch (dev->id) { + case 0: + t = MPMC_READ_REG(SC1) & SC_MW_MASK; + break; + case 1: + t = MPMC_READ_REG(SC0) & SC_MW_MASK; + break; + } + map->bankwidth = flash_bankwidths[t]; + if (map->bankwidth == 0) { + MAP_ERR(map, "invalid bus width detected\n"); + goto err_out; + } + + map->phys = fdesc->phys; + map->size = BANK_SIZE_MAX; + + simple_map_init(map); + map->read = adm5120_flash_read; + map->write = adm5120_flash_write; + map->copy_from = adm5120_flash_copy_from; + + if (pdata) { + map->set_vpp = pdata->set_vpp; + info->amap.switch_bank = pdata->switch_bank; + } + + info->dev = dev; + + MAP_INFO(map, "probing at 0x%lX, size:%ldKiB, width:%d bits\n", + (unsigned long)map->phys, + (unsigned long)info->amap.window_size >> 10, + map->bankwidth*8); + + return 0; + +err_out: + return -ENODEV; +} + +static void adm5120_flash_initbanks(struct adm5120_flash_info *info) +{ + struct map_info *map = &info->amap.map; + + if (info->mtd->size <= BANK_SIZE) + /* no bank switching needed */ + return; + + if (info->amap.switch_bank) { + info->amap.window_size = info->mtd->size; + return; + } + + MAP_ERR(map, "reduce visibility from %ldKiB to %ldKiB\n", + (unsigned long)map->size >> 10, + (unsigned long)info->mtd->size >> 10); + + info->mtd->size = info->amap.window_size; +} + +static int adm5120_flash_remove(struct platform_device *dev) +{ + struct adm5120_flash_info *info; + + info = platform_get_drvdata(dev); + if (info == NULL) + return 0; + + platform_set_drvdata(dev, NULL); + + if (info->mtd != NULL) { + mtd_device_unregister(info->mtd); + map_destroy(info->mtd); + } + + if (info->amap.map.virt != NULL) + iounmap(info->amap.map.virt); + + if (info->res != NULL) { + release_resource(info->res); + kfree(info->res); + } + + return 0; +} + +static int adm5120_flash_probe(struct platform_device *dev) +{ + struct adm5120_flash_platform_data *pdata; + struct adm5120_flash_info *info; + struct map_info *map; + const char **probe_type; + int err; + + pdata = dev->dev.platform_data; + if (!pdata) { + dev_err(&dev->dev, "no platform data\n"); + return -EINVAL; + } + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (info == NULL) { + err = -ENOMEM; + goto err_out; + } + + platform_set_drvdata(dev, info); + + err = adm5120_flash_initinfo(info, dev); + if (err) + goto err_out; + + err = adm5120_flash_initres(info); + if (err) + goto err_out; + + map = &info->amap.map; + for (probe_type = probe_types; info->mtd == NULL && *probe_type != NULL; + probe_type++) + info->mtd = do_map_probe(*probe_type, map); + + if (info->mtd == NULL) { + MAP_ERR(map, "map_probe failed\n"); + err = -ENXIO; + goto err_out; + } + + adm5120_flash_initbanks(info); + + if (info->mtd->size < info->amap.window_size) { + /* readjust resources */ + iounmap(map->virt); + release_resource(info->res); + kfree(info->res); + + info->amap.window_size = info->mtd->size; + map->size = info->mtd->size; + MAP_INFO(map, "reducing map size to %ldKiB\n", + (unsigned long)map->size >> 10); + err = adm5120_flash_initres(info); + if (err) + goto err_out; + } + + MAP_INFO(map, "found at 0x%lX, size:%ldKiB, width:%d bits\n", + (unsigned long)map->phys, (unsigned long)info->mtd->size >> 10, + map->bankwidth*8); + + info->mtd->owner = THIS_MODULE; + + err = mtd_device_parse_register(info->mtd, parse_types, 0, + pdata->parts, pdata->nr_parts); + if (err) + goto err_out; + + return 0; + +err_out: + adm5120_flash_remove(dev); + return err; +} + +#ifdef CONFIG_PM +static int adm5120_flash_suspend(struct platform_device *dev, + pm_message_t state) +{ + struct adm5120_flash_info *info = platform_get_drvdata(dev); + int ret = 0; + + if (info) + ret = info->mtd->suspend(info->mtd); + + return ret; +} + +static int adm5120_flash_resume(struct platform_device *dev) +{ + struct adm5120_flash_info *info = platform_get_drvdata(dev); + + if (info) + info->mtd->resume(info->mtd); + + return 0; +} + +static void adm5120_flash_shutdown(struct platform_device *dev) +{ + struct adm5120_flash_info *info = platform_get_drvdata(dev); + + if (info && info->mtd->suspend(info->mtd) == 0) + info->mtd->resume(info->mtd); +} +#endif + +static struct platform_driver adm5120_flash_driver = { + .probe = adm5120_flash_probe, + .remove = adm5120_flash_remove, +#ifdef CONFIG_PM + .suspend = adm5120_flash_suspend, + .resume = adm5120_flash_resume, + .shutdown = adm5120_flash_shutdown, +#endif + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init adm5120_flash_init(void) +{ + int err; + + err = platform_driver_register(&adm5120_flash_driver); + + return err; +} + +static void __exit adm5120_flash_exit(void) +{ + platform_driver_unregister(&adm5120_flash_driver); +} + +module_init(adm5120_flash_init); +module_exit(adm5120_flash_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_DESCRIPTION(DRV_DESC); diff --git a/target/linux/adm5120/files-3.18/drivers/mtd/trxsplit.c b/target/linux/adm5120/files-3.18/drivers/mtd/trxsplit.c new file mode 100644 index 0000000000..76cbdc7494 --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/mtd/trxsplit.c @@ -0,0 +1,216 @@ +/* + * Copyright (C) Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#define PFX "trxsplit: " + +#define TRX_MAGIC 0x30524448 /* "HDR0" */ +#define TRX_VERSION 1 +#define TRX_MAX_LEN 0x3A0000 +#define TRX_NO_HEADER 0x1 /* do not write TRX header */ +#define TRX_GZ_FILES 0x2 /* contains individual gzip files */ +#define TRX_MAX_OFFSET 3 +#define TRX_MIN_KERNEL_SIZE (256 * 1024) + +struct trx_header { + u32 magic; /* "HDR0" */ + u32 len; /* Length of file including header */ + u32 crc32; /* 32-bit CRC from flag_version to end of file */ + u32 flag_version; /* 0:15 flags, 16:31 version */ + u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions */ +}; + +#define TRX_ALIGN 0x1000 + +static int trx_nr_parts; +static unsigned long trx_offset; +static struct mtd_info *trx_mtd; +static struct mtd_partition trx_parts[TRX_MAX_OFFSET]; +static struct trx_header trx_hdr; + +static int trxsplit_refresh_partitions(struct mtd_info *mtd); + +static int trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset) +{ + size_t retlen; + int err; + + err = mtd_read(mtd, offset, sizeof(trx_hdr), &retlen, (void *)&trx_hdr); + if (err) { + printk(KERN_ALERT PFX "unable to read from '%s'\n", mtd->name); + goto err_out; + } + + if (retlen != sizeof(trx_hdr)) { + printk(KERN_ALERT PFX "reading failed on '%s'\n", mtd->name); + goto err_out; + } + + trx_hdr.magic = le32_to_cpu(trx_hdr.magic); + trx_hdr.len = le32_to_cpu(trx_hdr.len); + trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32); + trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version); + trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]); + trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]); + trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]); + + /* sanity checks */ + if (trx_hdr.magic != TRX_MAGIC) + goto err_out; + + if (trx_hdr.len > mtd->size - offset) + goto err_out; + + /* TODO: add crc32 checking too? */ + + return 0; + +err_out: + return -1; +} + +static void trxsplit_findtrx(struct mtd_info *mtd) +{ + unsigned long offset; + int err; + + printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name); + + err = 0; + for (offset = 0; offset < mtd->size; offset += TRX_ALIGN) { + err = trxsplit_checktrx(mtd, offset); + if (err == 0) + break; + } + + if (err) + return; + + printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset); + + trx_mtd = mtd; + trx_offset = offset; +} + +static void trxsplit_create_partitions(struct mtd_info *mtd) +{ + struct mtd_partition *part = trx_parts; + int err; + int i; + + for (i = 0; i < TRX_MAX_OFFSET; i++) { + part = &trx_parts[i]; + if (trx_hdr.offsets[i] == 0) + continue; + part->offset = trx_offset + trx_hdr.offsets[i]; + trx_nr_parts++; + } + + for (i = 0; i < trx_nr_parts-1; i++) + trx_parts[i].size = trx_parts[i+1].offset - trx_parts[i].offset; + + trx_parts[i].size = mtd->size - trx_parts[i].offset; + + i = 0; + part = &trx_parts[i]; + if (part->size < TRX_MIN_KERNEL_SIZE) { + part->name = "loader"; + i++; + } + + part = &trx_parts[i]; + part->name = "kernel"; + i++; + + part = &trx_parts[i]; + part->name = "rootfs"; + + err = mtd_device_register(mtd, trx_parts, trx_nr_parts); + if (err) { + printk(KERN_ALERT PFX "adding TRX partitions failed\n"); + return; + } + + mtd->refresh_device = trxsplit_refresh_partitions; +} + +static int trxsplit_refresh_partitions(struct mtd_info *mtd) +{ + printk(KERN_INFO PFX "refreshing TRX partitions in '%s' (%d,%d)\n", + mtd->name, MTD_BLOCK_MAJOR, mtd->index); + + /* remove old partitions */ + mtd_device_unregister(mtd); + + trxsplit_findtrx(mtd); + if (!trx_mtd) + goto err; + + trxsplit_create_partitions(trx_mtd); + return 1; + +err: + return 0; +} + +static void __init trxsplit_add_mtd(struct mtd_info *mtd) +{ + if (mtd->type != MTD_NORFLASH) { + printk(KERN_INFO PFX "'%s' is not a NOR flash, skipped\n", + mtd->name); + return; + } + + if (!trx_mtd) + trxsplit_findtrx(mtd); +} + +static void __init trxsplit_remove_mtd(struct mtd_info *mtd) +{ + /* nothing to do */ +} + +static struct mtd_notifier trxsplit_notifier __initdata = { + .add = trxsplit_add_mtd, + .remove = trxsplit_remove_mtd, +}; + +static void __init trxsplit_scan(void) +{ + register_mtd_user(&trxsplit_notifier); + unregister_mtd_user(&trxsplit_notifier); +} + +static int __init trxsplit_init(void) +{ + trxsplit_scan(); + + if (trx_mtd) { + printk(KERN_INFO PFX "creating TRX partitions in '%s' " + "(%d,%d)\n", trx_mtd->name, MTD_BLOCK_MAJOR, + trx_mtd->index); + trxsplit_create_partitions(trx_mtd); + } + + return 0; +} + +late_initcall(trxsplit_init); diff --git a/target/linux/adm5120/files-3.18/drivers/net/adm5120sw.c b/target/linux/adm5120/files-3.18/drivers/net/adm5120sw.c new file mode 100644 index 0000000000..7fbabb00e4 --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/net/adm5120sw.c @@ -0,0 +1,1219 @@ +/* + * ADM5120 built-in ethernet switch driver + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This code was based on a driver for Linux 2.6.xx by Jeroen Vreeken. + * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005 + * NAPI extension for the Jeroen's driver + * Copyright Thomas Langer (Thomas.Langer@infineon.com), 2007 + * Copyright Friedrich Beckmann (Friedrich.Beckmann@infineon.com), 2007 + * Inspiration for the Jeroen's driver came from the ADMtek 2.4 driver. + * Copyright ADMtek Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include +#include + +#include "adm5120sw.h" +#include + +#define DRV_NAME "adm5120-switch" +#define DRV_DESC "ADM5120 built-in ethernet switch driver" +#define DRV_VERSION "0.1.1" + +#define CONFIG_ADM5120_SWITCH_NAPI 1 +#undef CONFIG_ADM5120_SWITCH_DEBUG + +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_ADM5120_SWITCH_DEBUG +#define SW_DBG(f, a...) printk(KERN_DEBUG "%s: " f, DRV_NAME , ## a) +#else +#define SW_DBG(f, a...) do {} while (0) +#endif +#define SW_ERR(f, a...) printk(KERN_ERR "%s: " f, DRV_NAME , ## a) +#define SW_INFO(f, a...) printk(KERN_INFO "%s: " f, DRV_NAME , ## a) + +#define SWITCH_NUM_PORTS 6 +#define ETH_CSUM_LEN 4 + +#define RX_MAX_PKTLEN 1550 +#define RX_RING_SIZE 64 + +#define TX_RING_SIZE 32 +#define TX_QUEUE_LEN 28 /* Limit ring entries actually used. */ +#define TX_TIMEOUT (HZ * 400) + +#define RX_DESCS_SIZE (RX_RING_SIZE * sizeof(struct dma_desc *)) +#define RX_SKBS_SIZE (RX_RING_SIZE * sizeof(struct sk_buff *)) +#define TX_DESCS_SIZE (TX_RING_SIZE * sizeof(struct dma_desc *)) +#define TX_SKBS_SIZE (TX_RING_SIZE * sizeof(struct sk_buff *)) + +#define SKB_ALLOC_LEN (RX_MAX_PKTLEN + 32) +#define SKB_RESERVE_LEN (NET_IP_ALIGN + NET_SKB_PAD) + +#define SWITCH_INTS_HIGH (SWITCH_INT_SHD | SWITCH_INT_RHD | SWITCH_INT_HDF) +#define SWITCH_INTS_LOW (SWITCH_INT_SLD | SWITCH_INT_RLD | SWITCH_INT_LDF) +#define SWITCH_INTS_ERR (SWITCH_INT_RDE | SWITCH_INT_SDE | SWITCH_INT_CPUH) +#define SWITCH_INTS_Q (SWITCH_INT_P0QF | SWITCH_INT_P1QF | SWITCH_INT_P2QF | \ + SWITCH_INT_P3QF | SWITCH_INT_P4QF | SWITCH_INT_P5QF | \ + SWITCH_INT_CPQF | SWITCH_INT_GQF) + +#define SWITCH_INTS_ALL (SWITCH_INTS_HIGH | SWITCH_INTS_LOW | \ + SWITCH_INTS_ERR | SWITCH_INTS_Q | \ + SWITCH_INT_MD | SWITCH_INT_PSC) + +#define SWITCH_INTS_USED (SWITCH_INTS_LOW | SWITCH_INT_PSC) +#define SWITCH_INTS_POLL (SWITCH_INT_RLD | SWITCH_INT_LDF | SWITCH_INT_SLD) + +/* ------------------------------------------------------------------------ */ + +struct adm5120_if_priv { + struct net_device *dev; + + unsigned int vlan_no; + unsigned int port_mask; + +#ifdef CONFIG_ADM5120_SWITCH_NAPI + struct napi_struct napi; +#endif +}; + +struct dma_desc { + __u32 buf1; +#define DESC_OWN (1UL << 31) /* Owned by the switch */ +#define DESC_EOR (1UL << 28) /* End of Ring */ +#define DESC_ADDR_MASK 0x1FFFFFF +#define DESC_ADDR(x) ((__u32)(x) & DESC_ADDR_MASK) + __u32 buf2; +#define DESC_BUF2_EN (1UL << 31) /* Buffer 2 enable */ + __u32 buflen; + __u32 misc; +/* definitions for tx/rx descriptors */ +#define DESC_PKTLEN_SHIFT 16 +#define DESC_PKTLEN_MASK 0x7FF +/* tx descriptor specific part */ +#define DESC_CSUM (1UL << 31) /* Append checksum */ +#define DESC_DSTPORT_SHIFT 8 +#define DESC_DSTPORT_MASK 0x3F +#define DESC_VLAN_MASK 0x3F +/* rx descriptor specific part */ +#define DESC_SRCPORT_SHIFT 12 +#define DESC_SRCPORT_MASK 0x7 +#define DESC_DA_MASK 0x3 +#define DESC_DA_SHIFT 4 +#define DESC_IPCSUM_FAIL (1UL << 3) /* IP checksum fail */ +#define DESC_VLAN_TAG (1UL << 2) /* VLAN tag present */ +#define DESC_TYPE_MASK 0x3 /* mask for Packet type */ +#define DESC_TYPE_IP 0x0 /* IP packet */ +#define DESC_TYPE_PPPoE 0x1 /* PPPoE packet */ +} __attribute__ ((aligned(16))); + +/* ------------------------------------------------------------------------ */ + +static int adm5120_nrdevs; + +static struct net_device *adm5120_devs[SWITCH_NUM_PORTS]; +/* Lookup table port -> device */ +static struct net_device *adm5120_port[SWITCH_NUM_PORTS]; + +static struct dma_desc *txl_descs; +static struct dma_desc *rxl_descs; + +static dma_addr_t txl_descs_dma; +static dma_addr_t rxl_descs_dma; + +static struct sk_buff **txl_skbuff; +static struct sk_buff **rxl_skbuff; + +static unsigned int cur_rxl, dirty_rxl; /* producer/consumer ring indices */ +static unsigned int cur_txl, dirty_txl; + +static unsigned int sw_used; + +static DEFINE_SPINLOCK(tx_lock); + +/* ------------------------------------------------------------------------ */ + +static inline u32 sw_read_reg(u32 reg) +{ + return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg); +} + +static inline void sw_write_reg(u32 reg, u32 val) +{ + __raw_writel(val, (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg); +} + +static inline void sw_int_mask(u32 mask) +{ + u32 t; + + t = sw_read_reg(SWITCH_REG_INT_MASK); + t |= mask; + sw_write_reg(SWITCH_REG_INT_MASK, t); +} + +static inline void sw_int_unmask(u32 mask) +{ + u32 t; + + t = sw_read_reg(SWITCH_REG_INT_MASK); + t &= ~mask; + sw_write_reg(SWITCH_REG_INT_MASK, t); +} + +static inline void sw_int_ack(u32 mask) +{ + sw_write_reg(SWITCH_REG_INT_STATUS, mask); +} + +static inline u32 sw_int_status(void) +{ + u32 t; + + t = sw_read_reg(SWITCH_REG_INT_STATUS); + t &= ~sw_read_reg(SWITCH_REG_INT_MASK); + return t; +} + +static inline u32 desc_get_srcport(struct dma_desc *desc) +{ + return (desc->misc >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK; +} + +static inline u32 desc_get_pktlen(struct dma_desc *desc) +{ + return (desc->misc >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK; +} + +static inline int desc_ipcsum_fail(struct dma_desc *desc) +{ + return ((desc->misc & DESC_IPCSUM_FAIL) != 0); +} + +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_ADM5120_SWITCH_DEBUG +static void sw_dump_desc(char *label, struct dma_desc *desc, int tx) +{ + u32 t; + + SW_DBG("%s %s desc/%p\n", label, tx ? "tx" : "rx", desc); + + t = desc->buf1; + SW_DBG(" buf1 %08X addr=%08X; len=%08X %s%s\n", t, + t & DESC_ADDR_MASK, + desc->buflen, + (t & DESC_OWN) ? "SWITCH" : "CPU", + (t & DESC_EOR) ? " RE" : ""); + + t = desc->buf2; + SW_DBG(" buf2 %08X addr=%08X%s\n", desc->buf2, + t & DESC_ADDR_MASK, + (t & DESC_BUF2_EN) ? " EN" : ""); + + t = desc->misc; + if (tx) + SW_DBG(" misc %08X%s pktlen=%04X ports=%02X vlan=%02X\n", t, + (t & DESC_CSUM) ? " CSUM" : "", + (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK, + (t >> DESC_DSTPORT_SHIFT) & DESC_DSTPORT_MASK, + t & DESC_VLAN_MASK); + else + SW_DBG(" misc %08X pktlen=%04X port=%d DA=%d%s%s type=%d\n", + t, + (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK, + (t >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK, + (t >> DESC_DA_SHIFT) & DESC_DA_MASK, + (t & DESC_IPCSUM_FAIL) ? " IPCF" : "", + (t & DESC_VLAN_TAG) ? " VLAN" : "", + (t & DESC_TYPE_MASK)); +} + +static void sw_dump_intr_mask(char *label, u32 mask) +{ + SW_DBG("%s %08X%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", + label, mask, + (mask & SWITCH_INT_SHD) ? " SHD" : "", + (mask & SWITCH_INT_SLD) ? " SLD" : "", + (mask & SWITCH_INT_RHD) ? " RHD" : "", + (mask & SWITCH_INT_RLD) ? " RLD" : "", + (mask & SWITCH_INT_HDF) ? " HDF" : "", + (mask & SWITCH_INT_LDF) ? " LDF" : "", + (mask & SWITCH_INT_P0QF) ? " P0QF" : "", + (mask & SWITCH_INT_P1QF) ? " P1QF" : "", + (mask & SWITCH_INT_P2QF) ? " P2QF" : "", + (mask & SWITCH_INT_P3QF) ? " P3QF" : "", + (mask & SWITCH_INT_P4QF) ? " P4QF" : "", + (mask & SWITCH_INT_CPQF) ? " CPQF" : "", + (mask & SWITCH_INT_GQF) ? " GQF" : "", + (mask & SWITCH_INT_MD) ? " MD" : "", + (mask & SWITCH_INT_BCS) ? " BCS" : "", + (mask & SWITCH_INT_PSC) ? " PSC" : "", + (mask & SWITCH_INT_ID) ? " ID" : "", + (mask & SWITCH_INT_W0TE) ? " W0TE" : "", + (mask & SWITCH_INT_W1TE) ? " W1TE" : "", + (mask & SWITCH_INT_RDE) ? " RDE" : "", + (mask & SWITCH_INT_SDE) ? " SDE" : "", + (mask & SWITCH_INT_CPUH) ? " CPUH" : ""); +} + +static void sw_dump_regs(void) +{ + u32 t; + + t = sw_read_reg(SWITCH_REG_PHY_STATUS); + SW_DBG("phy_status: %08X\n", t); + + t = sw_read_reg(SWITCH_REG_CPUP_CONF); + SW_DBG("cpup_conf: %08X%s%s%s\n", t, + (t & CPUP_CONF_DCPUP) ? " DCPUP" : "", + (t & CPUP_CONF_CRCP) ? " CRCP" : "", + (t & CPUP_CONF_BTM) ? " BTM" : ""); + + t = sw_read_reg(SWITCH_REG_PORT_CONF0); + SW_DBG("port_conf0: %08X\n", t); + t = sw_read_reg(SWITCH_REG_PORT_CONF1); + SW_DBG("port_conf1: %08X\n", t); + t = sw_read_reg(SWITCH_REG_PORT_CONF2); + SW_DBG("port_conf2: %08X\n", t); + + t = sw_read_reg(SWITCH_REG_VLAN_G1); + SW_DBG("vlan g1: %08X\n", t); + t = sw_read_reg(SWITCH_REG_VLAN_G2); + SW_DBG("vlan g2: %08X\n", t); + + t = sw_read_reg(SWITCH_REG_BW_CNTL0); + SW_DBG("bw_cntl0: %08X\n", t); + t = sw_read_reg(SWITCH_REG_BW_CNTL1); + SW_DBG("bw_cntl1: %08X\n", t); + + t = sw_read_reg(SWITCH_REG_PHY_CNTL0); + SW_DBG("phy_cntl0: %08X\n", t); + t = sw_read_reg(SWITCH_REG_PHY_CNTL1); + SW_DBG("phy_cntl1: %08X\n", t); + t = sw_read_reg(SWITCH_REG_PHY_CNTL2); + SW_DBG("phy_cntl2: %08X\n", t); + t = sw_read_reg(SWITCH_REG_PHY_CNTL3); + SW_DBG("phy_cntl3: %08X\n", t); + t = sw_read_reg(SWITCH_REG_PHY_CNTL4); + SW_DBG("phy_cntl4: %08X\n", t); + + t = sw_read_reg(SWITCH_REG_INT_STATUS); + sw_dump_intr_mask("int_status: ", t); + + t = sw_read_reg(SWITCH_REG_INT_MASK); + sw_dump_intr_mask("int_mask: ", t); + + t = sw_read_reg(SWITCH_REG_SHDA); + SW_DBG("shda: %08X\n", t); + t = sw_read_reg(SWITCH_REG_SLDA); + SW_DBG("slda: %08X\n", t); + t = sw_read_reg(SWITCH_REG_RHDA); + SW_DBG("rhda: %08X\n", t); + t = sw_read_reg(SWITCH_REG_RLDA); + SW_DBG("rlda: %08X\n", t); +} +#else +static inline void sw_dump_desc(char *label, struct dma_desc *desc, int tx) {} +static void sw_dump_intr_mask(char *label, u32 mask) {} +static inline void sw_dump_regs(void) {} +#endif /* CONFIG_ADM5120_SWITCH_DEBUG */ + +/* ------------------------------------------------------------------------ */ + +static inline void adm5120_rx_dma_update(struct dma_desc *desc, + struct sk_buff *skb, int end) +{ + desc->misc = 0; + desc->buf2 = 0; + desc->buflen = RX_MAX_PKTLEN; + desc->buf1 = DESC_ADDR(skb->data) | + DESC_OWN | (end ? DESC_EOR : 0); +} + +static void adm5120_switch_rx_refill(void) +{ + unsigned int entry; + + for (; cur_rxl - dirty_rxl > 0; dirty_rxl++) { + struct dma_desc *desc; + struct sk_buff *skb; + + entry = dirty_rxl % RX_RING_SIZE; + desc = &rxl_descs[entry]; + + skb = rxl_skbuff[entry]; + if (skb == NULL) { + skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC); + if (skb) { + skb_reserve(skb, SKB_RESERVE_LEN); + rxl_skbuff[entry] = skb; + } else { + SW_ERR("no memory for skb\n"); + desc->buflen = 0; + desc->buf2 = 0; + desc->misc = 0; + desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN; + break; + } + } + + desc->buf2 = 0; + desc->buflen = RX_MAX_PKTLEN; + desc->misc = 0; + desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN | + DESC_ADDR(skb->data); + } +} + +static int adm5120_switch_rx(int limit) +{ + unsigned int done = 0; + + SW_DBG("rx start, limit=%d, cur_rxl=%u, dirty_rxl=%u\n", + limit, cur_rxl, dirty_rxl); + + while (done < limit) { + int entry = cur_rxl % RX_RING_SIZE; + struct dma_desc *desc = &rxl_descs[entry]; + struct net_device *rdev; + unsigned int port; + + if (desc->buf1 & DESC_OWN) + break; + + if (dirty_rxl + RX_RING_SIZE == cur_rxl) + break; + + port = desc_get_srcport(desc); + rdev = adm5120_port[port]; + + SW_DBG("rx descriptor %u, desc=%p, skb=%p\n", entry, desc, + rxl_skbuff[entry]); + + if ((rdev) && netif_running(rdev)) { + struct sk_buff *skb = rxl_skbuff[entry]; + int pktlen; + + pktlen = desc_get_pktlen(desc); + pktlen -= ETH_CSUM_LEN; + + if ((pktlen == 0) || desc_ipcsum_fail(desc)) { + rdev->stats.rx_errors++; + if (pktlen == 0) + rdev->stats.rx_length_errors++; + if (desc_ipcsum_fail(desc)) + rdev->stats.rx_crc_errors++; + SW_DBG("rx error, recycling skb %u\n", entry); + } else { + skb_put(skb, pktlen); + + skb->dev = rdev; + skb->protocol = eth_type_trans(skb, rdev); + skb->ip_summed = CHECKSUM_UNNECESSARY; + + dma_cache_wback_inv((unsigned long)skb->data, + skb->len); + +#ifdef CONFIG_ADM5120_SWITCH_NAPI + netif_receive_skb(skb); +#else + netif_rx(skb); +#endif + + rdev->last_rx = jiffies; + rdev->stats.rx_packets++; + rdev->stats.rx_bytes += pktlen; + + rxl_skbuff[entry] = NULL; + done++; + } + } else { + SW_DBG("no rx device, recycling skb %u\n", entry); + } + + cur_rxl++; + if (cur_rxl - dirty_rxl > RX_RING_SIZE / 4) + adm5120_switch_rx_refill(); + } + + adm5120_switch_rx_refill(); + + SW_DBG("rx finished, cur_rxl=%u, dirty_rxl=%u, processed %d\n", + cur_rxl, dirty_rxl, done); + + return done; +} + +static void adm5120_switch_tx(void) +{ + unsigned int entry; + + spin_lock(&tx_lock); + entry = dirty_txl % TX_RING_SIZE; + while (dirty_txl != cur_txl) { + struct dma_desc *desc = &txl_descs[entry]; + struct sk_buff *skb = txl_skbuff[entry]; + + if (desc->buf1 & DESC_OWN) + break; + + if (netif_running(skb->dev)) { + skb->dev->stats.tx_bytes += skb->len; + skb->dev->stats.tx_packets++; + } + + dev_kfree_skb_irq(skb); + txl_skbuff[entry] = NULL; + entry = (++dirty_txl) % TX_RING_SIZE; + } + + if ((cur_txl - dirty_txl) < TX_QUEUE_LEN - 4) { + int i; + for (i = 0; i < SWITCH_NUM_PORTS; i++) { + if (!adm5120_devs[i]) + continue; + netif_wake_queue(adm5120_devs[i]); + } + } + spin_unlock(&tx_lock); +} + +#ifdef CONFIG_ADM5120_SWITCH_NAPI +static int adm5120_if_poll(struct napi_struct *napi, int limit) +{ + struct adm5120_if_priv *priv = container_of(napi, + struct adm5120_if_priv, napi); + struct net_device *dev __maybe_unused = priv->dev; + int done; + u32 status; + + sw_int_ack(SWITCH_INTS_POLL); + + SW_DBG("%s: processing TX ring\n", dev->name); + adm5120_switch_tx(); + + SW_DBG("%s: processing RX ring\n", dev->name); + done = adm5120_switch_rx(limit); + + status = sw_int_status() & SWITCH_INTS_POLL; + if ((done < limit) && (!status)) { + SW_DBG("disable polling mode for %s\n", dev->name); + napi_complete(napi); + sw_int_unmask(SWITCH_INTS_POLL); + return 0; + } + + SW_DBG("%s still in polling mode, done=%d, status=%x\n", + dev->name, done, status); + return 1; +} +#endif /* CONFIG_ADM5120_SWITCH_NAPI */ + + +static irqreturn_t adm5120_switch_irq(int irq, void *dev_id) +{ + u32 status; + + status = sw_int_status(); + status &= SWITCH_INTS_ALL; + if (!status) + return IRQ_NONE; + +#ifdef CONFIG_ADM5120_SWITCH_NAPI + sw_int_ack(status & ~SWITCH_INTS_POLL); + + if (status & SWITCH_INTS_POLL) { + struct net_device *dev = dev_id; + struct adm5120_if_priv *priv = netdev_priv(dev); + + sw_dump_intr_mask("poll ints", status); + SW_DBG("enable polling mode for %s\n", dev->name); + sw_int_mask(SWITCH_INTS_POLL); + napi_schedule(&priv->napi); + } +#else + sw_int_ack(status); + + if (status & (SWITCH_INT_RLD | SWITCH_INT_LDF)) + adm5120_switch_rx(RX_RING_SIZE); + + if (status & SWITCH_INT_SLD) + adm5120_switch_tx(); +#endif + + return IRQ_HANDLED; +} + +static void adm5120_set_bw(char *matrix) +{ + unsigned long val; + + /* Port 0 to 3 are set using the bandwidth control 0 register */ + val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24); + sw_write_reg(SWITCH_REG_BW_CNTL0, val); + + /* Port 4 and 5 are set using the bandwidth control 1 register */ + val = matrix[4]; + if (matrix[5] == 1) + sw_write_reg(SWITCH_REG_BW_CNTL1, val | 0x80000000); + else + sw_write_reg(SWITCH_REG_BW_CNTL1, val & ~0x8000000); + + SW_DBG("D: ctl0 0x%ux, ctl1 0x%ux\n", sw_read_reg(SWITCH_REG_BW_CNTL0), + sw_read_reg(SWITCH_REG_BW_CNTL1)); +} + +static void adm5120_switch_tx_ring_reset(struct dma_desc *desc, + struct sk_buff **skbl, int num) +{ + memset(desc, 0, num * sizeof(*desc)); + desc[num-1].buf1 |= DESC_EOR; + memset(skbl, 0, sizeof(struct skb *) * num); + + cur_txl = 0; + dirty_txl = 0; +} + +static void adm5120_switch_rx_ring_reset(struct dma_desc *desc, + struct sk_buff **skbl, int num) +{ + int i; + + memset(desc, 0, num * sizeof(*desc)); + for (i = 0; i < num; i++) { + skbl[i] = dev_alloc_skb(SKB_ALLOC_LEN); + if (!skbl[i]) { + i = num; + break; + } + skb_reserve(skbl[i], SKB_RESERVE_LEN); + adm5120_rx_dma_update(&desc[i], skbl[i], (num - 1 == i)); + } + + cur_rxl = 0; + dirty_rxl = 0; +} + +static int adm5120_switch_tx_ring_alloc(void) +{ + int err; + + txl_descs = dma_alloc_coherent(NULL, TX_DESCS_SIZE, &txl_descs_dma, + GFP_ATOMIC); + if (!txl_descs) { + err = -ENOMEM; + goto err; + } + + txl_skbuff = kzalloc(TX_SKBS_SIZE, GFP_KERNEL); + if (!txl_skbuff) { + err = -ENOMEM; + goto err; + } + + return 0; + +err: + return err; +} + +static void adm5120_switch_tx_ring_free(void) +{ + int i; + + if (txl_skbuff) { + for (i = 0; i < TX_RING_SIZE; i++) + if (txl_skbuff[i]) + kfree_skb(txl_skbuff[i]); + kfree(txl_skbuff); + } + + if (txl_descs) + dma_free_coherent(NULL, TX_DESCS_SIZE, txl_descs, + txl_descs_dma); +} + +static int adm5120_switch_rx_ring_alloc(void) +{ + int err; + int i; + + /* init RX ring */ + rxl_descs = dma_alloc_coherent(NULL, RX_DESCS_SIZE, &rxl_descs_dma, + GFP_ATOMIC); + if (!rxl_descs) { + err = -ENOMEM; + goto err; + } + + rxl_skbuff = kzalloc(RX_SKBS_SIZE, GFP_KERNEL); + if (!rxl_skbuff) { + err = -ENOMEM; + goto err; + } + + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb; + skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC); + if (!skb) { + err = -ENOMEM; + goto err; + } + rxl_skbuff[i] = skb; + skb_reserve(skb, SKB_RESERVE_LEN); + } + + return 0; + +err: + return err; +} + +static void adm5120_switch_rx_ring_free(void) +{ + int i; + + if (rxl_skbuff) { + for (i = 0; i < RX_RING_SIZE; i++) + if (rxl_skbuff[i]) + kfree_skb(rxl_skbuff[i]); + kfree(rxl_skbuff); + } + + if (rxl_descs) + dma_free_coherent(NULL, RX_DESCS_SIZE, rxl_descs, + rxl_descs_dma); +} + +static void adm5120_write_mac(struct net_device *dev) +{ + struct adm5120_if_priv *priv = netdev_priv(dev); + unsigned char *mac = dev->dev_addr; + u32 t; + + t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT) | + (mac[4] << MAC_WT1_MAC4_SHIFT) | (mac[5] << MAC_WT1_MAC5_SHIFT); + sw_write_reg(SWITCH_REG_MAC_WT1, t); + + t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) | + MAC_WT0_MAWC | MAC_WT0_WVE | (priv->vlan_no<<3); + + sw_write_reg(SWITCH_REG_MAC_WT0, t); + + while (!(sw_read_reg(SWITCH_REG_MAC_WT0) & MAC_WT0_MWD)) + ; +} + +static void adm5120_set_vlan(char *matrix) +{ + unsigned long val; + int vlan_port, port; + + val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24); + sw_write_reg(SWITCH_REG_VLAN_G1, val); + val = matrix[4] + (matrix[5]<<8); + sw_write_reg(SWITCH_REG_VLAN_G2, val); + + /* Now set/update the port vs. device lookup table */ + for (port = 0; port < SWITCH_NUM_PORTS; port++) { + for (vlan_port = 0; vlan_port < SWITCH_NUM_PORTS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++) + ; + if (vlan_port < SWITCH_NUM_PORTS) + adm5120_port[port] = adm5120_devs[vlan_port]; + else + adm5120_port[port] = NULL; + } +} + +static void adm5120_switch_set_vlan_mac(unsigned int vlan, unsigned char *mac) +{ + u32 t; + + t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT) + | (mac[4] << MAC_WT1_MAC4_SHIFT) + | (mac[5] << MAC_WT1_MAC5_SHIFT); + sw_write_reg(SWITCH_REG_MAC_WT1, t); + + t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) | + MAC_WT0_MAWC | MAC_WT0_WVE | (vlan << MAC_WT0_WVN_SHIFT) | + (MAC_WT0_WAF_STATIC << MAC_WT0_WAF_SHIFT); + sw_write_reg(SWITCH_REG_MAC_WT0, t); + + do { + t = sw_read_reg(SWITCH_REG_MAC_WT0); + } while ((t & MAC_WT0_MWD) == 0); +} + +static void adm5120_switch_set_vlan_ports(unsigned int vlan, u32 ports) +{ + unsigned int reg; + u32 t; + + if (vlan < 4) + reg = SWITCH_REG_VLAN_G1; + else { + vlan -= 4; + reg = SWITCH_REG_VLAN_G2; + } + + t = sw_read_reg(reg); + t &= ~(0xFF << (vlan*8)); + t |= (ports << (vlan*8)); + sw_write_reg(reg, t); +} + +/* ------------------------------------------------------------------------ */ + +#ifdef CONFIG_ADM5120_SWITCH_NAPI +static inline void adm5120_if_napi_enable(struct net_device *dev) +{ + struct adm5120_if_priv *priv = netdev_priv(dev); + napi_enable(&priv->napi); +} + +static inline void adm5120_if_napi_disable(struct net_device *dev) +{ + struct adm5120_if_priv *priv = netdev_priv(dev); + napi_disable(&priv->napi); +} +#else +static inline void adm5120_if_napi_enable(struct net_device *dev) {} +static inline void adm5120_if_napi_disable(struct net_device *dev) {} +#endif /* CONFIG_ADM5120_SWITCH_NAPI */ + +static int adm5120_if_open(struct net_device *dev) +{ + u32 t; + int err; + int i; + + adm5120_if_napi_enable(dev); + + err = request_irq(dev->irq, adm5120_switch_irq, IRQF_SHARED, + dev->name, dev); + if (err) { + SW_ERR("unable to get irq for %s\n", dev->name); + goto err; + } + + if (!sw_used++) + /* enable interrupts on first open */ + sw_int_unmask(SWITCH_INTS_USED); + + /* enable (additional) port */ + t = sw_read_reg(SWITCH_REG_PORT_CONF0); + for (i = 0; i < SWITCH_NUM_PORTS; i++) { + if (dev == adm5120_devs[i]) + t &= ~adm5120_eth_vlans[i]; + } + sw_write_reg(SWITCH_REG_PORT_CONF0, t); + + netif_start_queue(dev); + + return 0; + +err: + adm5120_if_napi_disable(dev); + return err; +} + +static int adm5120_if_stop(struct net_device *dev) +{ + u32 t; + int i; + + netif_stop_queue(dev); + adm5120_if_napi_disable(dev); + + /* disable port if not assigned to other devices */ + t = sw_read_reg(SWITCH_REG_PORT_CONF0); + t |= SWITCH_PORTS_NOCPU; + for (i = 0; i < SWITCH_NUM_PORTS; i++) { + if ((dev != adm5120_devs[i]) && netif_running(adm5120_devs[i])) + t &= ~adm5120_eth_vlans[i]; + } + sw_write_reg(SWITCH_REG_PORT_CONF0, t); + + if (!--sw_used) + sw_int_mask(SWITCH_INTS_USED); + + free_irq(dev->irq, dev); + + return 0; +} + +static int adm5120_if_hard_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct dma_desc *desc; + struct adm5120_if_priv *priv = netdev_priv(dev); + unsigned int entry; + unsigned long data; + int i; + + /* lock switch irq */ + spin_lock_irq(&tx_lock); + + /* calculate the next TX descriptor entry. */ + entry = cur_txl % TX_RING_SIZE; + + desc = &txl_descs[entry]; + if (desc->buf1 & DESC_OWN) { + /* We want to write a packet but the TX queue is still + * occupied by the DMA. We are faster than the DMA... */ + SW_DBG("%s unable to transmit, packet dopped\n", dev->name); + dev_kfree_skb(skb); + dev->stats.tx_dropped++; + return 0; + } + + txl_skbuff[entry] = skb; + data = (desc->buf1 & DESC_EOR); + data |= DESC_ADDR(skb->data); + + desc->misc = + ((skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len) << DESC_PKTLEN_SHIFT) | + (0x1 << priv->vlan_no); + + desc->buflen = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + + desc->buf1 = data | DESC_OWN; + sw_write_reg(SWITCH_REG_SEND_TRIG, SEND_TRIG_STL); + + cur_txl++; + if (cur_txl == dirty_txl + TX_QUEUE_LEN) { + for (i = 0; i < SWITCH_NUM_PORTS; i++) { + if (!adm5120_devs[i]) + continue; + netif_stop_queue(adm5120_devs[i]); + } + } + + dev->trans_start = jiffies; + + spin_unlock_irq(&tx_lock); + + return 0; +} + +static void adm5120_if_tx_timeout(struct net_device *dev) +{ + SW_INFO("TX timeout on %s\n", dev->name); +} + +static void adm5120_if_set_rx_mode(struct net_device *dev) +{ + struct adm5120_if_priv *priv = netdev_priv(dev); + u32 ports; + u32 t; + + ports = adm5120_eth_vlans[priv->vlan_no] & SWITCH_PORTS_NOCPU; + + t = sw_read_reg(SWITCH_REG_CPUP_CONF); + if (dev->flags & IFF_PROMISC) + /* enable unknown packets */ + t &= ~(ports << CPUP_CONF_DUNP_SHIFT); + else + /* disable unknown packets */ + t |= (ports << CPUP_CONF_DUNP_SHIFT); + + if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || + netdev_mc_count(dev)) + /* enable multicast packets */ + t &= ~(ports << CPUP_CONF_DMCP_SHIFT); + else + /* disable multicast packets */ + t |= (ports << CPUP_CONF_DMCP_SHIFT); + + /* If there is any port configured to be in promiscuous mode, then the */ + /* Bridge Test Mode has to be activated. This will result in */ + /* transporting also packets learned in another VLAN to be forwarded */ + /* to the CPU. */ + /* The difficult scenario is when we want to build a bridge on the CPU.*/ + /* Assume we have port0 and the CPU port in VLAN0 and port1 and the */ + /* CPU port in VLAN1. Now we build a bridge on the CPU between */ + /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode. */ + /* Now assume a packet with ethernet source address 99 enters port 0 */ + /* It will be forwarded to the CPU because it is unknown. Then the */ + /* bridge in the CPU will send it to VLAN1 and it goes out at port 1. */ + /* When now a packet with ethernet destination address 99 comes in at */ + /* port 1 in VLAN1, then the switch has learned that this address is */ + /* located at port 0 in VLAN0. Therefore the switch will drop */ + /* this packet. In order to avoid this and to send the packet still */ + /* to the CPU, the Bridge Test Mode has to be activated. */ + + /* Check if there is any vlan in promisc mode. */ + if (~t & (SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT)) + t |= CPUP_CONF_BTM; /* Enable Bridge Testing Mode */ + else + t &= ~CPUP_CONF_BTM; /* Disable Bridge Testing Mode */ + + sw_write_reg(SWITCH_REG_CPUP_CONF, t); + +} + +static int adm5120_if_set_mac_address(struct net_device *dev, void *p) +{ + int ret; + + ret = eth_mac_addr(dev, p); + if (ret) + return ret; + + adm5120_write_mac(dev); + return 0; +} + +static int adm5120_if_do_ioctl(struct net_device *dev, struct ifreq *rq, + int cmd) +{ + int err; + struct adm5120_sw_info info; + struct adm5120_if_priv *priv = netdev_priv(dev); + + switch (cmd) { + case SIOCGADMINFO: + info.magic = 0x5120; + info.ports = adm5120_nrdevs; + info.vlan = priv->vlan_no; + err = copy_to_user(rq->ifr_data, &info, sizeof(info)); + if (err) + return -EFAULT; + break; + case SIOCSMATRIX: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + err = copy_from_user(adm5120_eth_vlans, rq->ifr_data, + sizeof(adm5120_eth_vlans)); + if (err) + return -EFAULT; + adm5120_set_vlan(adm5120_eth_vlans); + break; + case SIOCGMATRIX: + err = copy_to_user(rq->ifr_data, adm5120_eth_vlans, + sizeof(adm5120_eth_vlans)); + if (err) + return -EFAULT; + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + +static const struct net_device_ops adm5120sw_netdev_ops = { + .ndo_open = adm5120_if_open, + .ndo_stop = adm5120_if_stop, + .ndo_start_xmit = adm5120_if_hard_start_xmit, + .ndo_set_rx_mode = adm5120_if_set_rx_mode, + .ndo_do_ioctl = adm5120_if_do_ioctl, + .ndo_tx_timeout = adm5120_if_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = adm5120_if_set_mac_address, +}; + +static struct net_device *adm5120_if_alloc(void) +{ + struct net_device *dev; + struct adm5120_if_priv *priv; + + dev = alloc_etherdev(sizeof(*priv)); + if (!dev) + return NULL; + + priv = netdev_priv(dev); + priv->dev = dev; + + dev->irq = ADM5120_IRQ_SWITCH; + dev->netdev_ops = &adm5120sw_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + +#ifdef CONFIG_ADM5120_SWITCH_NAPI + netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64); +#endif + + return dev; +} + +/* ------------------------------------------------------------------------ */ + +static void adm5120_switch_cleanup(void) +{ + int i; + + /* disable interrupts */ + sw_int_mask(SWITCH_INTS_ALL); + + for (i = 0; i < SWITCH_NUM_PORTS; i++) { + struct net_device *dev = adm5120_devs[i]; + if (dev) { + unregister_netdev(dev); + free_netdev(dev); + } + } + + adm5120_switch_tx_ring_free(); + adm5120_switch_rx_ring_free(); +} + +static int adm5120_switch_probe(struct platform_device *pdev) +{ + u32 t; + int i, err; + + adm5120_nrdevs = adm5120_eth_num_ports; + + t = CPUP_CONF_DCPUP | CPUP_CONF_CRCP | + SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT | + SWITCH_PORTS_NOCPU << CPUP_CONF_DMCP_SHIFT ; + sw_write_reg(SWITCH_REG_CPUP_CONF, t); + + t = (SWITCH_PORTS_NOCPU << PORT_CONF0_EMCP_SHIFT) | + (SWITCH_PORTS_NOCPU << PORT_CONF0_BP_SHIFT) | + (SWITCH_PORTS_NOCPU); + sw_write_reg(SWITCH_REG_PORT_CONF0, t); + + /* setup ports to Autoneg/100M/Full duplex/Auto MDIX */ + t = SWITCH_PORTS_PHY | + (SWITCH_PORTS_PHY << PHY_CNTL2_SC_SHIFT) | + (SWITCH_PORTS_PHY << PHY_CNTL2_DC_SHIFT) | + (SWITCH_PORTS_PHY << PHY_CNTL2_PHYR_SHIFT) | + (SWITCH_PORTS_PHY << PHY_CNTL2_AMDIX_SHIFT) | + PHY_CNTL2_RMAE; + sw_write_reg(SWITCH_REG_PHY_CNTL2, t); + + t = sw_read_reg(SWITCH_REG_PHY_CNTL3); + t |= PHY_CNTL3_RNT; + sw_write_reg(SWITCH_REG_PHY_CNTL3, t); + + /* Force all the packets from all ports are low priority */ + sw_write_reg(SWITCH_REG_PRI_CNTL, 0); + + sw_int_mask(SWITCH_INTS_ALL); + sw_int_ack(SWITCH_INTS_ALL); + + err = adm5120_switch_rx_ring_alloc(); + if (err) + goto err; + + err = adm5120_switch_tx_ring_alloc(); + if (err) + goto err; + + adm5120_switch_tx_ring_reset(txl_descs, txl_skbuff, TX_RING_SIZE); + adm5120_switch_rx_ring_reset(rxl_descs, rxl_skbuff, RX_RING_SIZE); + + sw_write_reg(SWITCH_REG_SHDA, 0); + sw_write_reg(SWITCH_REG_SLDA, KSEG1ADDR(txl_descs)); + sw_write_reg(SWITCH_REG_RHDA, 0); + sw_write_reg(SWITCH_REG_RLDA, KSEG1ADDR(rxl_descs)); + + for (i = 0; i < SWITCH_NUM_PORTS; i++) { + struct net_device *dev; + struct adm5120_if_priv *priv; + + dev = adm5120_if_alloc(); + if (!dev) { + err = -ENOMEM; + goto err; + } + + adm5120_devs[i] = dev; + priv = netdev_priv(dev); + + priv->vlan_no = i; + priv->port_mask = adm5120_eth_vlans[i]; + + memcpy(dev->dev_addr, adm5120_eth_macs[i], 6); + adm5120_write_mac(dev); + + err = register_netdev(dev); + if (err) { + SW_INFO("%s register failed, error=%d\n", + dev->name, err); + goto err; + } + } + + /* setup vlan/port mapping after devs are filled up */ + adm5120_set_vlan(adm5120_eth_vlans); + + /* enable CPU port */ + t = sw_read_reg(SWITCH_REG_CPUP_CONF); + t &= ~CPUP_CONF_DCPUP; + sw_write_reg(SWITCH_REG_CPUP_CONF, t); + + return 0; + +err: + adm5120_switch_cleanup(); + + SW_ERR("init failed\n"); + return err; +} + +static int adm5120_switch_remove(struct platform_device *pdev) +{ + adm5120_switch_cleanup(); + return 0; +} + +static struct platform_driver adm5120_switch_driver = { + .probe = adm5120_switch_probe, + .remove = adm5120_switch_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +/* -------------------------------------------------------------------------- */ + +static int __init adm5120_switch_mod_init(void) +{ + int err; + + pr_info(DRV_DESC " version " DRV_VERSION "\n"); + err = platform_driver_register(&adm5120_switch_driver); + + return err; +} + +static void __exit adm5120_switch_mod_exit(void) +{ + platform_driver_unregister(&adm5120_switch_driver); +} + +module_init(adm5120_switch_mod_init); +module_exit(adm5120_switch_mod_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_VERSION(DRV_VERSION); diff --git a/target/linux/adm5120/files-3.18/drivers/net/adm5120sw.h b/target/linux/adm5120/files-3.18/drivers/net/adm5120sw.h new file mode 100644 index 0000000000..fa9e503359 --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/net/adm5120sw.h @@ -0,0 +1,23 @@ +/* + * Defines for ADM5120 built in ethernet switch driver + * + * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005 + * + * Values come from ADM5120 datasheet and original ADMtek 2.4 driver, + * Copyright ADMtek Inc. + */ + +#ifndef _INCLUDE_ADM5120SW_H_ +#define _INCLUDE_ADM5120SW_H_ + +#define SIOCSMATRIX SIOCDEVPRIVATE +#define SIOCGMATRIX (SIOCDEVPRIVATE + 1) +#define SIOCGADMINFO (SIOCDEVPRIVATE + 2) + +struct adm5120_sw_info { + u16 magic; + u16 ports; + u16 vlan; +}; + +#endif /* _INCLUDE_ADM5120SW_H_ */ diff --git a/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-dbg.c b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-dbg.c new file mode 100644 index 0000000000..2d5dc2a5a7 --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-dbg.c @@ -0,0 +1,836 @@ +/* + * ADM5120 HCD (Host Controller Driver) for USB + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: drivers/usb/host/ohci-dbg.c + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2002 David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +/*-------------------------------------------------------------------------*/ + +static inline char *ed_typestring(int ed_type) +{ + switch (ed_type) { + case PIPE_CONTROL: + return "ctrl"; + case PIPE_BULK: + return "bulk"; + case PIPE_INTERRUPT: + return "intr"; + case PIPE_ISOCHRONOUS: + return "isoc"; + } + return "(bad ed_type)"; +} + +static inline char *ed_statestring(int state) +{ + switch (state) { + case ED_IDLE: + return "IDLE"; + case ED_UNLINK: + return "UNLINK"; + case ED_OPER: + return "OPER"; + } + return "?STATE"; +} + +static inline char *pipestring(int pipe) +{ + return ed_typestring(usb_pipetype(pipe)); +} + +static inline char *td_pidstring(u32 info) +{ + switch (info & TD_DP) { + case TD_DP_SETUP: + return "SETUP"; + case TD_DP_IN: + return "IN"; + case TD_DP_OUT: + return "OUT"; + } + return "?PID"; +} + +static inline char *td_togglestring(u32 info) +{ + switch (info & TD_T) { + case TD_T_DATA0: + return "DATA0"; + case TD_T_DATA1: + return "DATA1"; + case TD_T_CARRY: + return "CARRY"; + } + return "?TOGGLE"; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG + +/* debug| print the main components of an URB + * small: 0) header + data packets 1) just header + */ +static void __attribute__((unused)) +urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status) +{ + unsigned int pipe = urb->pipe; + + if (!urb->dev || !urb->dev->bus) { + admhc_dbg(ahcd, "%s URB: no dev", str); + return; + } + +#ifndef ADMHC_VERBOSE_DEBUG + if (status != 0) +#endif + admhc_dbg(ahcd, "URB-%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d " + "stat=%d\n", + str, + urb, + usb_pipedevice(pipe), + usb_pipeendpoint(pipe), + usb_pipeout(pipe) ? "out" : "in", + pipestring(pipe), + urb->transfer_flags, + urb->actual_length, + urb->transfer_buffer_length, + status); + +#ifdef ADMHC_VERBOSE_DEBUG + if (!small) { + int i, len; + + if (usb_pipecontrol(pipe)) { + admhc_dbg(ahcd, "setup(8):"); + for (i = 0; i < 8 ; i++) + printk(KERN_INFO" %02x", ((__u8 *)urb->setup_packet)[i]); + printk(KERN_INFO "\n"); + } + if (urb->transfer_buffer_length > 0 && urb->transfer_buffer) { + admhc_dbg(ahcd, "data(%d/%d):", + urb->actual_length, + urb->transfer_buffer_length); + len = usb_pipeout(pipe) ? + urb->transfer_buffer_length : urb->actual_length; + for (i = 0; i < 16 && i < len; i++) + printk(KERN_INFO " %02x", ((__u8 *)urb->transfer_buffer)[i]); + printk(KERN_INFO "%s stat:%d\n", i < len ? "..." : "", status); + } + } +#endif /* ADMHC_VERBOSE_DEBUG */ +} + +#define admhc_dbg_sw(ahcd, next, size, format, arg...) \ + do { \ + if (next) { \ + unsigned s_len; \ + s_len = scnprintf(*next, *size, format, ## arg); \ + *size -= s_len; *next += s_len; \ + } else \ + admhc_dbg(ahcd, format, ## arg); \ + } while (0); + + +static void admhc_dump_intr_mask(struct admhcd *ahcd, char *label, u32 mask, + char **next, unsigned *size) +{ + admhc_dbg_sw(ahcd, next, size, "%s 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", + label, + mask, + (mask & ADMHC_INTR_INTA) ? " INTA" : "", + (mask & ADMHC_INTR_FATI) ? " FATI" : "", + (mask & ADMHC_INTR_SWI) ? " SWI" : "", + (mask & ADMHC_INTR_TDC) ? " TDC" : "", + (mask & ADMHC_INTR_FNO) ? " FNO" : "", + (mask & ADMHC_INTR_SO) ? " SO" : "", + (mask & ADMHC_INTR_INSM) ? " INSM" : "", + (mask & ADMHC_INTR_BABI) ? " BABI" : "", + (mask & ADMHC_INTR_7) ? " !7!" : "", + (mask & ADMHC_INTR_6) ? " !6!" : "", + (mask & ADMHC_INTR_RESI) ? " RESI" : "", + (mask & ADMHC_INTR_SOFI) ? " SOFI" : "" + ); +} + +static void maybe_print_eds(struct admhcd *ahcd, char *label, u32 value, + char **next, unsigned *size) +{ + if (value) + admhc_dbg_sw(ahcd, next, size, "%s %08x\n", label, value); +} + +static char *buss2string(int state) +{ + switch (state) { + case ADMHC_BUSS_RESET: + return "reset"; + case ADMHC_BUSS_RESUME: + return "resume"; + case ADMHC_BUSS_OPER: + return "operational"; + case ADMHC_BUSS_SUSPEND: + return "suspend"; + } + return "?state"; +} + +static void +admhc_dump_status(struct admhcd *ahcd, char **next, unsigned *size) +{ + struct admhcd_regs __iomem *regs = ahcd->regs; + u32 temp; + + temp = admhc_readl(ahcd, ®s->gencontrol); + admhc_dbg_sw(ahcd, next, size, + "gencontrol 0x%08x%s%s%s%s\n", + temp, + (temp & ADMHC_CTRL_UHFE) ? " UHFE" : "", + (temp & ADMHC_CTRL_SIR) ? " SIR" : "", + (temp & ADMHC_CTRL_DMAA) ? " DMAA" : "", + (temp & ADMHC_CTRL_SR) ? " SR" : "" + ); + + temp = admhc_readl(ahcd, ®s->host_control); + admhc_dbg_sw(ahcd, next, size, + "host_control 0x%08x BUSS=%s%s\n", + temp, + buss2string(temp & ADMHC_HC_BUSS), + (temp & ADMHC_HC_DMAE) ? " DMAE" : "" + ); + + admhc_dump_intr_mask(ahcd, "int_status", + admhc_readl(ahcd, ®s->int_status), + next, size); + admhc_dump_intr_mask(ahcd, "int_enable", + admhc_readl(ahcd, ®s->int_enable), + next, size); + + maybe_print_eds(ahcd, "hosthead", + admhc_readl(ahcd, ®s->hosthead), next, size); +} + +#define dbg_port_sw(hc, num, value, next, size) \ + admhc_dbg_sw(hc, next, size, \ + "portstatus [%d] " \ + "0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \ + num, temp, \ + (temp & ADMHC_PS_PRSC) ? " PRSC" : "", \ + (temp & ADMHC_PS_OCIC) ? " OCIC" : "", \ + (temp & ADMHC_PS_PSSC) ? " PSSC" : "", \ + (temp & ADMHC_PS_PESC) ? " PESC" : "", \ + (temp & ADMHC_PS_CSC) ? " CSC" : "", \ + \ + (temp & ADMHC_PS_LSDA) ? " LSDA" : "", \ + (temp & ADMHC_PS_PPS) ? " PPS" : "", \ + (temp & ADMHC_PS_PRS) ? " PRS" : "", \ + (temp & ADMHC_PS_POCI) ? " POCI" : "", \ + (temp & ADMHC_PS_PSS) ? " PSS" : "", \ + \ + (temp & ADMHC_PS_PES) ? " PES" : "", \ + (temp & ADMHC_PS_CCS) ? " CCS" : "" \ + ); + + +static void +admhc_dump_roothub( + struct admhcd *ahcd, + int verbose, + char **next, + unsigned *size) +{ + u32 temp, i; + + temp = admhc_read_rhdesc(ahcd); + if (temp == ~(u32)0) + return; + + if (verbose) { + admhc_dbg_sw(ahcd, next, size, + "rhdesc %08x%s%s%s%s%s%s PPCM=%02x%s%s%s%s NUMP=%d(%d)\n", + temp, + (temp & ADMHC_RH_CRWE) ? " CRWE" : "", + (temp & ADMHC_RH_OCIC) ? " OCIC" : "", + (temp & ADMHC_RH_LPSC) ? " LPSC" : "", + (temp & ADMHC_RH_LPSC) ? " DRWE" : "", + (temp & ADMHC_RH_LPSC) ? " OCI" : "", + (temp & ADMHC_RH_LPSC) ? " LPS" : "", + ((temp & ADMHC_RH_PPCM) >> 16), + (temp & ADMHC_RH_NOCP) ? " NOCP" : "", + (temp & ADMHC_RH_OCPM) ? " OCPM" : "", + (temp & ADMHC_RH_NPS) ? " NPS" : "", + (temp & ADMHC_RH_PSM) ? " PSM" : "", + (temp & ADMHC_RH_NUMP), ahcd->num_ports + ); + } + + for (i = 0; i < ahcd->num_ports; i++) { + temp = admhc_read_portstatus(ahcd, i); + dbg_port_sw(ahcd, i, temp, next, size); + } +} + +static void admhc_dump(struct admhcd *ahcd, int verbose) +{ + admhc_dbg(ahcd, "ADMHC ahcd state\n"); + + /* dumps some of the state we know about */ + admhc_dump_status(ahcd, NULL, NULL); + admhc_dbg(ahcd, "current frame #%04x\n", + admhc_frame_no(ahcd)); + + admhc_dump_roothub(ahcd, verbose, NULL, NULL); +} + +static const char data0[] = "DATA0"; +static const char data1[] = "DATA1"; + +static void admhc_dump_td(const struct admhcd *ahcd, const char *label, + const struct td *td) +{ + u32 tmp; + + admhc_dbg(ahcd, "%s td %p; urb %p index %d; hwNextTD %08x\n", + label, td, + td->urb, td->index, + hc32_to_cpup(ahcd, &td->hwNextTD)); + + tmp = hc32_to_cpup(ahcd, &td->hwINFO); + admhc_dbg(ahcd, " status %08x%s CC=%x EC=%d %s %s ISI=%x FN=%x\n", + tmp, + (tmp & TD_OWN) ? " OWN" : "", + TD_CC_GET(tmp), + TD_EC_GET(tmp), + td_togglestring(tmp), + td_pidstring(tmp), + TD_ISI_GET(tmp), + TD_FN_GET(tmp)); + + tmp = hc32_to_cpup(ahcd, &td->hwCBL); + admhc_dbg(ahcd, " dbp %08x; cbl %08x; LEN=%d%s\n", + hc32_to_cpup(ahcd, &td->hwDBP), + tmp, + TD_BL_GET(tmp), + (tmp & TD_IE) ? " IE" : ""); +} + +/* caller MUST own hcd spinlock if verbose is set! */ +static void __attribute__((unused)) +admhc_dump_ed(const struct admhcd *ahcd, const char *label, + const struct ed *ed, int verbose) +{ + u32 tmp = hc32_to_cpu(ahcd, ed->hwINFO); + + admhc_dbg(ahcd, "%s ed %p %s type %s; next ed %08x\n", + label, + ed, ed_statestring(ed->state), ed_typestring(ed->type), + hc32_to_cpup(ahcd, &ed->hwNextED)); + + admhc_dbg(ahcd, " info %08x MAX=%d%s%s%s%s EP=%d DEV=%d\n", tmp, + ED_MPS_GET(tmp), + (tmp & ED_ISO) ? " ISO" : "", + (tmp & ED_SKIP) ? " SKIP" : "", + (tmp & ED_SPEED_FULL) ? " FULL" : " LOW", + (tmp & ED_INT) ? " INT" : "", + ED_EN_GET(tmp), + ED_FA_GET(tmp)); + + tmp = hc32_to_cpup(ahcd, &ed->hwHeadP); + admhc_dbg(ahcd, " tds: head %08x tail %08x %s%s%s\n", + tmp & TD_MASK, + hc32_to_cpup(ahcd, &ed->hwTailP), + (tmp & ED_C) ? data1 : data0, + (tmp & ED_H) ? " HALT" : "", + verbose ? " td list follows" : " (not listing)"); + + if (verbose) { + struct list_head *tmp; + + /* use ed->td_list because HC concurrently modifies + * hwNextTD as it accumulates ed_donelist. + */ + list_for_each(tmp, &ed->td_list) { + struct td *td; + td = list_entry(tmp, struct td, td_list); + admhc_dump_td(ahcd, " ->", td); + } + } +} + +#else /* ifdef DEBUG */ + +static inline void urb_print(struct admhcd *ahcd, struct urb * urb, char * str, + int small, int status) {} +static inline void admhc_dump_ed(const struct admhcd *ahcd, const char *label, + const struct ed *ed, int verbose) {} +static inline void admhc_dump_td(const struct admhcd *ahcd, const char *label, + const struct td *td) {} +static inline void admhc_dump(struct admhcd *ahcd, int verbose) {} + +#undef ADMHC_VERBOSE_DEBUG + +#endif /* DEBUG */ + +/*-------------------------------------------------------------------------*/ + +#ifdef STUB_DEBUG_FILES + +static inline void create_debug_files(struct admhcd *bus) { } +static inline void remove_debug_files(struct admhcd *bus) { } + +#else + +static int debug_async_open(struct inode *, struct file *); +static int debug_periodic_open(struct inode *, struct file *); +static int debug_registers_open(struct inode *, struct file *); +static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*); +static int debug_close(struct inode *, struct file *); + +static const struct file_operations debug_async_fops = { + .owner = THIS_MODULE, + .open = debug_async_open, + .read = debug_output, + .release = debug_close, + .llseek = default_llseek, +}; +static const struct file_operations debug_periodic_fops = { + .owner = THIS_MODULE, + .open = debug_periodic_open, + .read = debug_output, + .release = debug_close, + .llseek = default_llseek, +}; +static const struct file_operations debug_registers_fops = { + .owner = THIS_MODULE, + .open = debug_registers_open, + .read = debug_output, + .release = debug_close, + .llseek = default_llseek, +}; + +static struct dentry *admhc_debug_root; + +struct debug_buffer { + ssize_t (*fill_func)(struct debug_buffer *); /* fill method */ + struct admhcd *ahcd; + struct mutex mutex; /* protect filling of buffer */ + size_t count; /* number of characters filled into buffer */ + char *page; +}; + +static ssize_t +show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed) +{ + unsigned temp; + unsigned size = count; + + if (!ed) + return 0; + + /* dump a snapshot of the bulk or control schedule */ + while (ed) { + u32 info = hc32_to_cpu(ahcd, ed->hwINFO); + u32 headp = hc32_to_cpu(ahcd, ed->hwHeadP); + u32 tailp = hc32_to_cpu(ahcd, ed->hwTailP); + struct list_head *entry; + struct td *td; + + temp = scnprintf(buf, size, + "ed/%p %s %s %cs dev%d ep%d %s%smax %d %08x%s%s %s" + " h:%08x t:%08x", + ed, + ed_statestring(ed->state), + ed_typestring(ed->type), + (info & ED_SPEED_FULL) ? 'f' : 'l', + info & ED_FA_MASK, + (info >> ED_EN_SHIFT) & ED_EN_MASK, + (info & ED_INT) ? "INT " : "", + (info & ED_ISO) ? "ISO " : "", + (info >> ED_MPS_SHIFT) & ED_MPS_MASK , + info, + (info & ED_SKIP) ? " S" : "", + (headp & ED_H) ? " H" : "", + (headp & ED_C) ? data1 : data0, + headp & ED_MASK, tailp); + size -= temp; + buf += temp; + + list_for_each(entry, &ed->td_list) { + u32 dbp, cbl; + + td = list_entry(entry, struct td, td_list); + info = hc32_to_cpup(ahcd, &td->hwINFO); + dbp = hc32_to_cpup(ahcd, &td->hwDBP); + cbl = hc32_to_cpup(ahcd, &td->hwCBL); + + temp = scnprintf(buf, size, + "\n\ttd/%p %s %d %s%scc=%x urb %p (%08x,%08x)", + td, + td_pidstring(info), + TD_BL_GET(cbl), + (info & TD_OWN) ? "" : "DONE ", + (cbl & TD_IE) ? "IE " : "", + TD_CC_GET(info), td->urb, info, cbl); + size -= temp; + buf += temp; + } + + temp = scnprintf(buf, size, "\n"); + size -= temp; + buf += temp; + + ed = ed->ed_next; + } + + return count - size; +} + +static ssize_t fill_async_buffer(struct debug_buffer *buf) +{ + struct admhcd *ahcd; + size_t temp; + unsigned long flags; + + ahcd = buf->ahcd; + + spin_lock_irqsave(&ahcd->lock, flags); + temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head); + spin_unlock_irqrestore(&ahcd->lock, flags); + + return temp; +} + + +#define DBG_SCHED_LIMIT 64 + +static ssize_t fill_periodic_buffer(struct debug_buffer *buf) +{ + struct admhcd *ahcd; + struct ed **seen, *ed; + unsigned long flags; + unsigned temp, size, seen_count; + char *next; + unsigned i; + + seen = kmalloc(DBG_SCHED_LIMIT * sizeof(*seen), GFP_ATOMIC); + if (!seen) + return 0; + seen_count = 0; + + ahcd = buf->ahcd; + next = buf->page; + size = PAGE_SIZE; + + temp = scnprintf(next, size, "size = %d\n", NUM_INTS); + size -= temp; + next += temp; + + /* dump a snapshot of the periodic schedule (and load) */ + spin_lock_irqsave(&ahcd->lock, flags); + for (i = 0; i < NUM_INTS; i++) { + ed = ahcd->periodic[i]; + if (!ed) + continue; + + temp = scnprintf(next, size, "%2d [%3d]:", i, ahcd->load[i]); + size -= temp; + next += temp; + + do { + temp = scnprintf(next, size, " ed%d/%p", + ed->interval, ed); + size -= temp; + next += temp; + for (temp = 0; temp < seen_count; temp++) { + if (seen[temp] == ed) + break; + } + + /* show more info the first time around */ + if (temp == seen_count) { + u32 info = hc32_to_cpu(ahcd, ed->hwINFO); + struct list_head *entry; + unsigned qlen = 0; + + /* qlen measured here in TDs, not urbs */ + list_for_each(entry, &ed->td_list) + qlen++; + temp = scnprintf(next, size, + " (%cs dev%d ep%d%s qlen %u" + " max %d %08x%s%s)", + (info & ED_SPEED_FULL) ? 'f' : 'l', + ED_FA_GET(info), + ED_EN_GET(info), + (info & ED_ISO) ? "iso" : "int", + qlen, + ED_MPS_GET(info), + info, + (info & ED_SKIP) ? " K" : "", + (ed->hwHeadP & + cpu_to_hc32(ahcd, ED_H)) ? + " H" : ""); + size -= temp; + next += temp; + + if (seen_count < DBG_SCHED_LIMIT) + seen[seen_count++] = ed; + + ed = ed->ed_next; + + } else { + /* we've seen it and what's after */ + temp = 0; + ed = NULL; + } + + } while (ed); + + temp = scnprintf(next, size, "\n"); + size -= temp; + next += temp; + } + spin_unlock_irqrestore(&ahcd->lock, flags); + kfree(seen); + + return PAGE_SIZE - size; +} + + +#undef DBG_SCHED_LIMIT + +static ssize_t fill_registers_buffer(struct debug_buffer *buf) +{ + struct usb_hcd *hcd; + struct admhcd *ahcd; + struct admhcd_regs __iomem *regs; + unsigned long flags; + unsigned temp, size; + char *next; + u32 rdata; + + ahcd = buf->ahcd; + hcd = admhc_to_hcd(ahcd); + regs = ahcd->regs; + next = buf->page; + size = PAGE_SIZE; + + spin_lock_irqsave(&ahcd->lock, flags); + + /* dump driver info, then registers in spec order */ + + admhc_dbg_sw(ahcd, &next, &size, + "bus %s, device %s\n" + "%s\n" + "%s\n", + hcd->self.controller->bus->name, + dev_name(hcd->self.controller), + hcd->product_desc, + hcd_name); + + if (!HCD_HW_ACCESSIBLE(hcd)) { + size -= scnprintf(next, size, + "SUSPENDED (no register access)\n"); + goto done; + } + + admhc_dump_status(ahcd, &next, &size); + + /* other registers mostly affect frame timings */ + rdata = admhc_readl(ahcd, ®s->fminterval); + temp = scnprintf(next, size, + "fmintvl 0x%08x %sFSLDP=0x%04x FI=0x%04x\n", + rdata, (rdata & ADMHC_SFI_FIT) ? "FIT " : "", + (rdata >> ADMHC_SFI_FSLDP_SHIFT) & ADMHC_SFI_FSLDP_MASK, + rdata & ADMHC_SFI_FI_MASK); + size -= temp; + next += temp; + + rdata = admhc_readl(ahcd, ®s->fmnumber); + temp = scnprintf(next, size, "fmnumber 0x%08x %sFR=0x%04x FN=%04x\n", + rdata, (rdata & ADMHC_SFN_FRT) ? "FRT " : "", + (rdata >> ADMHC_SFN_FR_SHIFT) & ADMHC_SFN_FR_MASK, + rdata & ADMHC_SFN_FN_MASK); + size -= temp; + next += temp; + + /* TODO: use predefined bitmask */ + rdata = admhc_readl(ahcd, ®s->lsthresh); + temp = scnprintf(next, size, "lsthresh 0x%04x\n", + rdata & 0x3fff); + size -= temp; + next += temp; + + temp = scnprintf(next, size, "hub poll timer: %s\n", + admhcd_to_hcd(ahcd)->poll_rh ? "ON" : "OFF"); + size -= temp; + next += temp; + + /* roothub */ + admhc_dump_roothub(ahcd, 1, &next, &size); + +done: + spin_unlock_irqrestore(&ahcd->lock, flags); + return PAGE_SIZE - size; +} + + +static struct debug_buffer *alloc_buffer(struct admhcd *ahcd, + ssize_t (*fill_func)(struct debug_buffer *)) +{ + struct debug_buffer *buf; + + buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL); + + if (buf) { + buf->ahcd = ahcd; + buf->fill_func = fill_func; + mutex_init(&buf->mutex); + } + + return buf; +} + +static int fill_buffer(struct debug_buffer *buf) +{ + int ret = 0; + + if (!buf->page) + buf->page = (char *)get_zeroed_page(GFP_KERNEL); + + if (!buf->page) { + ret = -ENOMEM; + goto out; + } + + ret = buf->fill_func(buf); + + if (ret >= 0) { + buf->count = ret; + ret = 0; + } + +out: + return ret; +} + +static ssize_t debug_output(struct file *file, char __user *user_buf, + size_t len, loff_t *offset) +{ + struct debug_buffer *buf = file->private_data; + int ret = 0; + + mutex_lock(&buf->mutex); + if (buf->count == 0) { + ret = fill_buffer(buf); + if (ret != 0) { + mutex_unlock(&buf->mutex); + goto out; + } + } + mutex_unlock(&buf->mutex); + + ret = simple_read_from_buffer(user_buf, len, offset, + buf->page, buf->count); + +out: + return ret; +} + +static int debug_close(struct inode *inode, struct file *file) +{ + struct debug_buffer *buf = file->private_data; + + if (buf) { + if (buf->page) + free_page((unsigned long)buf->page); + kfree(buf); + } + + return 0; +} + +static int debug_async_open(struct inode *inode, struct file *file) +{ + file->private_data = alloc_buffer(inode->i_private, fill_async_buffer); + + return file->private_data ? 0 : -ENOMEM; +} + +static int debug_periodic_open(struct inode *inode, struct file *file) +{ + file->private_data = alloc_buffer(inode->i_private, + fill_periodic_buffer); + + return file->private_data ? 0 : -ENOMEM; +} + +static int debug_registers_open(struct inode *inode, struct file *file) +{ + file->private_data = alloc_buffer(inode->i_private, + fill_registers_buffer); + + return file->private_data ? 0 : -ENOMEM; +} + +static inline void create_debug_files(struct admhcd *ahcd) +{ + struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self; + + ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root); + if (!ahcd->debug_dir) + goto dir_error; + + ahcd->debug_async = debugfs_create_file("async", S_IRUGO, + ahcd->debug_dir, ahcd, + &debug_async_fops); + if (!ahcd->debug_async) + goto async_error; + + ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO, + ahcd->debug_dir, ahcd, + &debug_periodic_fops); + if (!ahcd->debug_periodic) + goto periodic_error; + + ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO, + ahcd->debug_dir, ahcd, + &debug_registers_fops); + if (!ahcd->debug_registers) + goto registers_error; + + admhc_dbg(ahcd, "created debug files\n"); + return; + +registers_error: + debugfs_remove(ahcd->debug_periodic); +periodic_error: + debugfs_remove(ahcd->debug_async); +async_error: + debugfs_remove(ahcd->debug_dir); +dir_error: + ahcd->debug_periodic = NULL; + ahcd->debug_async = NULL; + ahcd->debug_dir = NULL; +} + +static inline void remove_debug_files(struct admhcd *ahcd) +{ + debugfs_remove(ahcd->debug_registers); + debugfs_remove(ahcd->debug_periodic); + debugfs_remove(ahcd->debug_async); + debugfs_remove(ahcd->debug_dir); +} + +#endif + +/*-------------------------------------------------------------------------*/ diff --git a/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-drv.c b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-drv.c new file mode 100644 index 0000000000..798fd22081 --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-drv.c @@ -0,0 +1,228 @@ +/* + * ADM5120 HCD (Host Controller Driver) for USB + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: drivers/usb/host/ohci-au1xxx.c + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2002 David Brownell + * (C) Copyright 2002 Hewlett-Packard Company + * + * Written by Christopher Hoover + * Based on fragments of previous driver by Russell King et al. + * + * Modified for LH7A404 from ahcd-sa1111.c + * by Durgesh Pattamatta + * Modified for AMD Alchemy Au1xxx + * by Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include + +#include +#include + +#ifdef DEBUG +#define HCD_DBG(f, a...) printk(KERN_DEBUG "%s: " f, hcd_name, ## a) +#else +#define HCD_DBG(f, a...) do {} while (0) +#endif +#define HCD_ERR(f, a...) printk(KERN_ERR "%s: " f, hcd_name, ## a) +#define HCD_INFO(f, a...) printk(KERN_INFO "%s: " f, hcd_name, ## a) + +/*-------------------------------------------------------------------------*/ + +static int admhc_adm5120_probe(const struct hc_driver *driver, + struct platform_device *dev) +{ + int retval; + struct usb_hcd *hcd; + int irq; + struct resource *regs; + + /* sanity checks */ + regs = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!regs) { + HCD_DBG("no IOMEM resource found\n"); + return -ENODEV; + } + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + HCD_DBG("no IRQ resource found\n"); + return -ENODEV; + } + + hcd = usb_create_hcd(driver, &dev->dev, "ADM5120"); + if (!hcd) + return -ENOMEM; + + hcd->rsrc_start = regs->start; + hcd->rsrc_len = regs->end - regs->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + HCD_DBG("request_mem_region failed\n"); + retval = -EBUSY; + goto err_dev; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + HCD_DBG("ioremap failed\n"); + retval = -ENOMEM; + goto err_mem; + } + + admhc_hcd_init(hcd_to_admhcd(hcd)); + + retval = usb_add_hcd(hcd, irq, 0); + if (retval) + goto err_io; + + return 0; + +err_io: + iounmap(hcd->regs); +err_mem: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err_dev: + usb_put_hcd(hcd); + return retval; +} + + +/* may be called without controller electrically present */ +/* may be called with controller, bus, and devices active */ + +static void admhc_adm5120_remove(struct usb_hcd *hcd, + struct platform_device *dev) +{ + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +static int admhc_adm5120_start(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + int ret; + + ret = admhc_init(ahcd); + if (ret < 0) { + HCD_ERR("unable to init %s\n", hcd->self.bus_name); + goto err; + } + + ret = admhc_run(ahcd); + if (ret < 0) { + HCD_ERR("unable to run %s\n", hcd->self.bus_name); + goto err_stop; + } + + return 0; + +err_stop: + admhc_stop(hcd); +err: + return ret; +} + +static const struct hc_driver adm5120_hc_driver = { + .description = hcd_name, + .product_desc = "ADM5120 built-in USB 1.1 Host Controller", + .hcd_priv_size = sizeof(struct admhcd), + + /* + * generic hardware linkage + */ + .irq = admhc_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .start = admhc_adm5120_start, + .stop = admhc_stop, + .shutdown = admhc_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = admhc_urb_enqueue, + .urb_dequeue = admhc_urb_dequeue, + .endpoint_disable = admhc_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = admhc_get_frame_number, + + /* + * root hub support + */ + .hub_status_data = admhc_hub_status_data, + .hub_control = admhc_hub_control, +#ifdef CONFIG_PM + .bus_suspend = admhc_bus_suspend, + .bus_resume = admhc_bus_resume, +#endif + .start_port_reset = admhc_start_port_reset, +}; + +static int usb_hcd_adm5120_probe(struct platform_device *pdev) +{ + int ret; + + ret = admhc_adm5120_probe(&adm5120_hc_driver, pdev); + + return ret; +} + +static int usb_hcd_adm5120_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + admhc_adm5120_remove(hcd, pdev); + + return 0; +} + +#ifdef CONFIG_PM +/* TODO */ +static int usb_hcd_adm5120_suspend(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + return 0; +} + +static int usb_hcd_adm5120_resume(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + return 0; +} +#else +#define usb_hcd_adm5120_suspend NULL +#define usb_hcd_adm5120_resume NULL +#endif /* CONFIG_PM */ + +static struct platform_driver usb_hcd_adm5120_driver = { + .probe = usb_hcd_adm5120_probe, + .remove = usb_hcd_adm5120_remove, + .shutdown = usb_hcd_platform_shutdown, + .suspend = usb_hcd_adm5120_suspend, + .resume = usb_hcd_adm5120_resume, + .driver = { + .name = "adm5120-hcd", + .owner = THIS_MODULE, + }, +}; + diff --git a/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-hcd.c new file mode 100644 index 0000000000..f721ec1ff8 --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-hcd.c @@ -0,0 +1,843 @@ +/* + * ADM5120 HCD (Host Controller Driver) for USB + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: drivers/usb/host/ohci-hcd.c + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2004 David Brownell + * + * [ Initialisation is based on Linus' ] + * [ uhci code and gregs ahcd fragments ] + * [ (C) Copyright 1999 Linus Torvalds ] + * [ (C) Copyright 1999 Gregory P. Smith] + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define DRIVER_VERSION "0.27.0" +#define DRIVER_AUTHOR "Gabor Juhos " +#define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver" + +/*-------------------------------------------------------------------------*/ + +#undef ADMHC_VERBOSE_DEBUG /* not always helpful */ + +/* For initializing controller (mask in an HCFS mode too) */ +#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR + +#define ADMHC_INTR_INIT \ + (ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \ + | ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI) + +/*-------------------------------------------------------------------------*/ + +static const char hcd_name[] = "admhc-hcd"; + +#define STATECHANGE_DELAY msecs_to_jiffies(300) + +#include "adm5120.h" + +static void admhc_dump(struct admhcd *ahcd, int verbose); +static int admhc_init(struct admhcd *ahcd); +static void admhc_stop(struct usb_hcd *hcd); + +#include "adm5120-dbg.c" +#include "adm5120-mem.c" +#include "adm5120-pm.c" +#include "adm5120-hub.c" +#include "adm5120-q.c" + +/*-------------------------------------------------------------------------*/ + +/* + * queue up an urb for anything except the root hub + */ +static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + struct ed *ed; + struct urb_priv *urb_priv; + unsigned int pipe = urb->pipe; + int td_cnt = 0; + unsigned long flags; + int ret = 0; + +#ifdef ADMHC_VERBOSE_DEBUG + spin_lock_irqsave(&ahcd->lock, flags); + urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe), -EINPROGRESS); + spin_unlock_irqrestore(&ahcd->lock, flags); +#endif + + /* every endpoint has an ed, locate and maybe (re)initialize it */ + ed = ed_get(ahcd, urb->ep, urb->dev, pipe, urb->interval); + if (!ed) + return -ENOMEM; + + /* for the private part of the URB we need the number of TDs */ + switch (ed->type) { + case PIPE_CONTROL: + if (urb->transfer_buffer_length > TD_DATALEN_MAX) + /* td_submit_urb() doesn't yet handle these */ + return -EMSGSIZE; + + /* 1 TD for setup, 1 for ACK, plus ... */ + td_cnt = 2; + /* FALLTHROUGH */ + case PIPE_BULK: + /* one TD for every 4096 Bytes (can be up to 8K) */ + td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX; + /* ... and for any remaining bytes ... */ + if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0) + td_cnt++; + /* ... and maybe a zero length packet to wrap it up */ + if (td_cnt == 0) + td_cnt++; + else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 + && (urb->transfer_buffer_length + % usb_maxpacket(urb->dev, pipe, + usb_pipeout(pipe))) == 0) + td_cnt++; + break; + case PIPE_INTERRUPT: + /* + * for Interrupt IN/OUT transactions, each ED contains + * only 1 TD. + * TODO: check transfer_buffer_length? + */ + td_cnt = 1; + break; + case PIPE_ISOCHRONOUS: + /* number of packets from URB */ + td_cnt = urb->number_of_packets; + break; + } + + urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags); + if (!urb_priv) + return -ENOMEM; + + urb_priv->ed = ed; + + spin_lock_irqsave(&ahcd->lock, flags); + /* don't submit to a dead HC */ + if (!HCD_HW_ACCESSIBLE(hcd)) { + ret = -ENODEV; + goto fail; + } + if (!HC_IS_RUNNING(hcd->state)) { + ret = -ENODEV; + goto fail; + } + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto fail; + + /* schedule the ed if needed */ + if (ed->state == ED_IDLE) { + ret = ed_schedule(ahcd, ed); + if (ret < 0) { + usb_hcd_unlink_urb_from_ep(hcd, urb); + goto fail; + } + if (ed->type == PIPE_ISOCHRONOUS) { + u16 frame = admhc_frame_no(ahcd); + + /* delay a few frames before the first TD */ + frame += max_t (u16, 8, ed->interval); + frame &= ~(ed->interval - 1); + frame |= ed->branch; + urb->start_frame = frame; + + /* yes, only URB_ISO_ASAP is supported, and + * urb->start_frame is never used as input. + */ + } + } else if (ed->type == PIPE_ISOCHRONOUS) + urb->start_frame = ed->last_iso + ed->interval; + + /* fill the TDs and link them to the ed; and + * enable that part of the schedule, if needed + * and update count of queued periodic urbs + */ + urb->hcpriv = urb_priv; + td_submit_urb(ahcd, urb); + +#ifdef ADMHC_VERBOSE_DEBUG + admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1); +#endif + +fail: + if (ret) + urb_priv_free(ahcd, urb_priv); + + spin_unlock_irqrestore(&ahcd->lock, flags); + return ret; +} + +/* + * decouple the URB from the HC queues (TDs, urb_priv); + * reporting is always done + * asynchronously, and we might be dealing with an urb that's + * partially transferred, or an ED with other urbs being unlinked. + */ +static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, + int status) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + unsigned long flags; + int ret; + + spin_lock_irqsave(&ahcd->lock, flags); + +#ifdef ADMHC_VERBOSE_DEBUG + urb_print(ahcd, urb, "DEQUEUE", 1, status); +#endif + ret = usb_hcd_check_unlink_urb(hcd, urb, status); + if (ret) { + /* Do nothing */ + ; + } else if (HC_IS_RUNNING(hcd->state)) { + struct urb_priv *urb_priv; + + /* Unless an IRQ completed the unlink while it was being + * handed to us, flag it for unlink and giveback, and force + * some upcoming INTR_SF to call finish_unlinks() + */ + urb_priv = urb->hcpriv; + if (urb_priv) { + if (urb_priv->ed->state == ED_OPER) + start_ed_unlink(ahcd, urb_priv->ed); + } + } else { + /* + * with HC dead, we won't respect hc queue pointers + * any more ... just clean up every urb's memory. + */ + if (urb->hcpriv) + finish_urb(ahcd, urb, status); + } + spin_unlock_irqrestore(&ahcd->lock, flags); + + return ret; +} + +/*-------------------------------------------------------------------------*/ + +/* frees config/altsetting state for endpoints, + * including ED memory, dummy TD, and bulk/intr data toggle + */ + +static void admhc_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + unsigned long flags; + struct ed *ed = ep->hcpriv; + unsigned limit = 1000; + + /* ASSERT: any requests/urbs are being unlinked */ + /* ASSERT: nobody can be submitting urbs for this any more */ + + if (!ed) + return; + +#ifdef ADMHC_VERBOSE_DEBUG + spin_lock_irqsave(&ahcd->lock, flags); + admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1); + spin_unlock_irqrestore(&ahcd->lock, flags); +#endif + +rescan: + spin_lock_irqsave(&ahcd->lock, flags); + + if (!HC_IS_RUNNING(hcd->state)) { +sanitize: + ed->state = ED_IDLE; + finish_unlinks(ahcd, 0); + } + + switch (ed->state) { + case ED_UNLINK: /* wait for hw to finish? */ + /* major IRQ delivery trouble loses INTR_SOFI too... */ + if (limit-- == 0) { + admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n"); + goto sanitize; + } + spin_unlock_irqrestore(&ahcd->lock, flags); + schedule_timeout_uninterruptible(1); + goto rescan; + case ED_IDLE: /* fully unlinked */ + if (list_empty(&ed->td_list)) { + td_free(ahcd, ed->dummy); + ed_free(ahcd, ed); + break; + } + /* else FALL THROUGH */ + default: + /* caller was supposed to have unlinked any requests; + * that's not our job. can't recover; must leak ed. + */ + admhc_err(ahcd, "leak ed %p (#%02x) state %d%s\n", + ed, ep->desc.bEndpointAddress, ed->state, + list_empty(&ed->td_list) ? "" : " (has tds)"); + td_free(ahcd, ed->dummy); + break; + } + + ep->hcpriv = NULL; + + spin_unlock_irqrestore(&ahcd->lock, flags); +} + +static int admhc_get_frame_number(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + + return admhc_frame_no(ahcd); +} + +static void admhc_usb_reset(struct admhcd *ahcd) +{ +#if 0 + ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control); + ahcd->hc_control &= OHCI_CTRL_RWC; + admhc_writel(ahcd, ahcd->hc_control, &ahcd->regs->control); +#else + /* FIXME */ + ahcd->host_control = ADMHC_BUSS_RESET; + admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control); +#endif +} + +/* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and + * other cases where the next software may expect clean state from the + * "firmware". this is bus-neutral, unlike shutdown() methods. + */ +static void +admhc_shutdown(struct usb_hcd *hcd) +{ + struct admhcd *ahcd; + + ahcd = hcd_to_admhcd(hcd); + admhc_intr_disable(ahcd, ADMHC_INTR_MIE); + admhc_dma_disable(ahcd); + admhc_usb_reset(ahcd); + /* flush the writes */ + admhc_writel_flush(ahcd); +} + +/*-------------------------------------------------------------------------* + * HC functions + *-------------------------------------------------------------------------*/ + +static void admhc_eds_cleanup(struct admhcd *ahcd) +{ + if (ahcd->ed_tails[PIPE_INTERRUPT]) { + ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]); + ahcd->ed_tails[PIPE_INTERRUPT] = NULL; + } + + if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) { + ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]); + ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL; + } + + if (ahcd->ed_tails[PIPE_CONTROL]) { + ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]); + ahcd->ed_tails[PIPE_CONTROL] = NULL; + } + + if (ahcd->ed_tails[PIPE_BULK]) { + ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]); + ahcd->ed_tails[PIPE_BULK] = NULL; + } + + ahcd->ed_head = NULL; +} + +#define ED_DUMMY_INFO (ED_SPEED_FULL | ED_SKIP) + +static int admhc_eds_init(struct admhcd *ahcd) +{ + struct ed *ed; + + ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO); + if (!ed) + goto err; + + ahcd->ed_tails[PIPE_INTERRUPT] = ed; + + ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO); + if (!ed) + goto err; + + ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed; + ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT]; + ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed; + ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma); + + ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO); + if (!ed) + goto err; + + ahcd->ed_tails[PIPE_CONTROL] = ed; + ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS]; + ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed; + ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma); + + ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO); + if (!ed) + goto err; + + ahcd->ed_tails[PIPE_BULK] = ed; + ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL]; + ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed; + ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma); + + ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT]; + +#ifdef ADMHC_VERBOSE_DEBUG + admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1); + admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1); + admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1); + admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1); +#endif + + return 0; + +err: + admhc_eds_cleanup(ahcd); + return -ENOMEM; +} + +/* init memory, and kick BIOS/SMM off */ + +static int admhc_init(struct admhcd *ahcd) +{ + struct usb_hcd *hcd = admhcd_to_hcd(ahcd); + int ret; + + admhc_disable(ahcd); + ahcd->regs = hcd->regs; + + /* Disable HC interrupts */ + admhc_intr_disable(ahcd, ADMHC_INTR_MIE); + + /* Read the number of ports unless overridden */ + if (ahcd->num_ports == 0) + ahcd->num_ports = admhc_read_rhdesc(ahcd) & ADMHC_RH_NUMP; + + ret = admhc_mem_init(ahcd); + if (ret) + goto err; + + /* init dummy endpoints */ + ret = admhc_eds_init(ahcd); + if (ret) + goto err; + + create_debug_files(ahcd); + + return 0; + +err: + admhc_stop(hcd); + return ret; +} + +/*-------------------------------------------------------------------------*/ + +/* Start an OHCI controller, set the BUS operational + * resets USB and controller + * enable interrupts + */ +static int admhc_run(struct admhcd *ahcd) +{ + u32 val; + int first = ahcd->fminterval == 0; + struct usb_hcd *hcd = admhcd_to_hcd(ahcd); + + admhc_disable(ahcd); + + /* boot firmware should have set this up (5.1.1.3.1) */ + if (first) { + val = admhc_readl(ahcd, &ahcd->regs->fminterval); + ahcd->fminterval = val & ADMHC_SFI_FI_MASK; + if (ahcd->fminterval != FI) + admhc_dbg(ahcd, "fminterval delta %d\n", + ahcd->fminterval - FI); + ahcd->fminterval |= + (FSLDP(ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT); + /* also: power/overcurrent flags in rhdesc */ + } + +#if 0 /* TODO: not applicable */ + /* Reset USB nearly "by the book". RemoteWakeupConnected has + * to be checked in case boot firmware (BIOS/SMM/...) has set up + * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM). + * If the bus glue detected wakeup capability then it should + * already be enabled; if so we'll just enable it again. + */ + if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0) + device_set_wakeup_capable(hcd->self.controller, 1); +#endif + + switch (ahcd->host_control & ADMHC_HC_BUSS) { + case ADMHC_BUSS_OPER: + val = 0; + break; + case ADMHC_BUSS_SUSPEND: + /* FALLTHROUGH ? */ + case ADMHC_BUSS_RESUME: + ahcd->host_control = ADMHC_BUSS_RESUME; + val = 10 /* msec wait */; + break; + /* case ADMHC_BUSS_RESET: */ + default: + ahcd->host_control = ADMHC_BUSS_RESET; + val = 50 /* msec wait */; + break; + } + admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control); + + /* flush the writes */ + admhc_writel_flush(ahcd); + + msleep(val); + val = admhc_read_rhdesc(ahcd); + if (!(val & ADMHC_RH_NPS)) { + /* power down each port */ + for (val = 0; val < ahcd->num_ports; val++) + admhc_write_portstatus(ahcd, val, ADMHC_PS_CPP); + } + /* flush those writes */ + admhc_writel_flush(ahcd); + + /* 2msec timelimit here means no irqs/preempt */ + spin_lock_irq(&ahcd->lock); + + admhc_writel(ahcd, ADMHC_CTRL_SR, &ahcd->regs->gencontrol); + val = 30; /* ... allow extra time */ + while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) { + if (--val == 0) { + spin_unlock_irq(&ahcd->lock); + admhc_err(ahcd, "USB HC reset timed out!\n"); + return -1; + } + udelay(1); + } + + /* enable HOST mode, before access any host specific register */ + admhc_writel(ahcd, ADMHC_CTRL_UHFE, &ahcd->regs->gencontrol); + + /* Tell the controller where the descriptor list is */ + admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead); + + periodic_reinit(ahcd); + + /* use rhsc irqs after khubd is fully initialized */ + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + hcd->uses_new_polling = 1; + +#if 0 + /* wake on ConnectStatusChange, matching external hubs */ + admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status); +#else + /* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */ +#endif + + /* Choose the interrupts we care about now, others later on demand */ + admhc_intr_ack(ahcd, ~0); + admhc_intr_enable(ahcd, ADMHC_INTR_INIT); + + admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc); + + /* flush those writes */ + admhc_writel_flush(ahcd); + + /* start controller operations */ + ahcd->host_control = ADMHC_BUSS_OPER; + admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control); + + val = 20; + while ((admhc_readl(ahcd, &ahcd->regs->host_control) + & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) { + if (--val == 0) { + spin_unlock_irq(&ahcd->lock); + admhc_err(ahcd, "unable to setup operational mode!\n"); + return -1; + } + mdelay(1); + } + + hcd->state = HC_STATE_RUNNING; + + ahcd->next_statechange = jiffies + STATECHANGE_DELAY; + +#if 0 + /* FIXME: enabling DMA is always failed here for an unknown reason */ + admhc_dma_enable(ahcd); + + val = 200; + while ((admhc_readl(ahcd, &ahcd->regs->host_control) + & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) { + if (--val == 0) { + spin_unlock_irq(&ahcd->lock); + admhc_err(ahcd, "unable to enable DMA!\n"); + admhc_dump(ahcd, 1); + return -1; + } + mdelay(1); + } + +#endif + + spin_unlock_irq(&ahcd->lock); + + mdelay(ADMHC_POTPGT); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* an interrupt happens */ + +static irqreturn_t admhc_irq(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + struct admhcd_regs __iomem *regs = ahcd->regs; + u32 ints; + + ints = admhc_readl(ahcd, ®s->int_status); + if ((ints & ADMHC_INTR_INTA) == 0) { + /* no unmasked interrupt status is set */ + return IRQ_NONE; + } + + ints &= admhc_readl(ahcd, ®s->int_enable); + + if (ints & ADMHC_INTR_FATI) { + /* e.g. due to PCI Master/Target Abort */ + admhc_disable(ahcd); + admhc_err(ahcd, "Fatal Error, controller disabled\n"); + admhc_dump(ahcd, 1); + admhc_usb_reset(ahcd); + } + + if (ints & ADMHC_INTR_BABI) { + admhc_intr_disable(ahcd, ADMHC_INTR_BABI); + admhc_intr_ack(ahcd, ADMHC_INTR_BABI); + admhc_err(ahcd, "Babble Detected\n"); + } + + if (ints & ADMHC_INTR_INSM) { + admhc_vdbg(ahcd, "Root Hub Status Change\n"); + ahcd->next_statechange = jiffies + STATECHANGE_DELAY; + admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM); + + /* NOTE: Vendors didn't always make the same implementation + * choices for RHSC. Many followed the spec; RHSC triggers + * on an edge, like setting and maybe clearing a port status + * change bit. With others it's level-triggered, active + * until khubd clears all the port status change bits. We'll + * always disable it here and rely on polling until khubd + * re-enables it. + */ + admhc_intr_disable(ahcd, ADMHC_INTR_INSM); + usb_hcd_poll_rh_status(hcd); + } else if (ints & ADMHC_INTR_RESI) { + /* For connect and disconnect events, we expect the controller + * to turn on RHSC along with RD. But for remote wakeup events + * this might not happen. + */ + admhc_vdbg(ahcd, "Resume Detect\n"); + admhc_intr_ack(ahcd, ADMHC_INTR_RESI); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + if (ahcd->autostop) { + spin_lock(&ahcd->lock); + admhc_rh_resume(ahcd); + spin_unlock(&ahcd->lock); + } else + usb_hcd_resume_root_hub(hcd); + } + + if (ints & ADMHC_INTR_TDC) { + admhc_vdbg(ahcd, "Transfer Descriptor Complete\n"); + admhc_intr_ack(ahcd, ADMHC_INTR_TDC); + if (HC_IS_RUNNING(hcd->state)) + admhc_intr_disable(ahcd, ADMHC_INTR_TDC); + spin_lock(&ahcd->lock); + admhc_td_complete(ahcd); + spin_unlock(&ahcd->lock); + if (HC_IS_RUNNING(hcd->state)) + admhc_intr_enable(ahcd, ADMHC_INTR_TDC); + } + + if (ints & ADMHC_INTR_SO) { + /* could track INTR_SO to reduce available PCI/... bandwidth */ + admhc_vdbg(ahcd, "Schedule Overrun\n"); + } + +#if 1 + spin_lock(&ahcd->lock); + if (ahcd->ed_rm_list) + finish_unlinks(ahcd, admhc_frame_no(ahcd)); + + if ((ints & ADMHC_INTR_SOFI) != 0 && !ahcd->ed_rm_list + && HC_IS_RUNNING(hcd->state)) + admhc_intr_disable(ahcd, ADMHC_INTR_SOFI); + spin_unlock(&ahcd->lock); +#else + if (ints & ADMHC_INTR_SOFI) { + admhc_vdbg(ahcd, "Start Of Frame\n"); + spin_lock(&ahcd->lock); + + /* handle any pending ED removes */ + finish_unlinks(ahcd, admhc_frameno(ahcd)); + + /* leaving INTR_SOFI enabled when there's still unlinking + * to be done in the (next frame). + */ + if ((ahcd->ed_rm_list == NULL) || + HC_IS_RUNNING(hcd->state) == 0) + /* + * disable INTR_SOFI if there are no unlinking to be + * done (in the next frame) + */ + admhc_intr_disable(ahcd, ADMHC_INTR_SOFI); + + spin_unlock(&ahcd->lock); + } +#endif + + if (HC_IS_RUNNING(hcd->state)) { + admhc_intr_ack(ahcd, ints); + admhc_intr_enable(ahcd, ADMHC_INTR_MIE); + admhc_writel_flush(ahcd); + } + + return IRQ_HANDLED; +} + +/*-------------------------------------------------------------------------*/ + +static void admhc_stop(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + + admhc_dump(ahcd, 1); + + flush_scheduled_work(); + + admhc_usb_reset(ahcd); + admhc_intr_disable(ahcd, ADMHC_INTR_MIE); + + free_irq(hcd->irq, hcd); + hcd->irq = -1; + + remove_debug_files(ahcd); + admhc_eds_cleanup(ahcd); + admhc_mem_cleanup(ahcd); +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_ADM5120 +#include "adm5120-drv.c" +#define PLATFORM_DRIVER usb_hcd_adm5120_driver +#endif + +#if !defined(PLATFORM_DRIVER) +#error "missing bus glue for admhc-hcd" +#endif + +#define DRIVER_INFO DRIVER_DESC " version " DRIVER_VERSION + +static int __init admhc_hcd_mod_init(void) +{ + int ret = 0; + + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_INFO "\n", hcd_name); + pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name, + sizeof(struct ed), sizeof(struct td)); + set_bit(USB_OHCI_LOADED, &usb_hcds_loaded); + +#ifdef DEBUG + admhc_debug_root = debugfs_create_dir("admhc", usb_debug_root); + if (!admhc_debug_root) { + ret = -ENOENT; + goto error_debug; + } +#endif + +#ifdef PLATFORM_DRIVER + ret = platform_driver_register(&PLATFORM_DRIVER); + if (ret < 0) + goto error_platform; +#endif + + return ret; + +#ifdef PLATFORM_DRIVER + platform_driver_unregister(&PLATFORM_DRIVER); +error_platform: +#endif + +#ifdef DEBUG + debugfs_remove(admhc_debug_root); + admhc_debug_root = NULL; +error_debug: +#endif + clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); + return ret; +} +module_init(admhc_hcd_mod_init); + +static void __exit admhc_hcd_mod_exit(void) +{ + platform_driver_unregister(&PLATFORM_DRIVER); +#ifdef DEBUG + debugfs_remove(admhc_debug_root); +#endif + clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded); +} +module_exit(admhc_hcd_mod_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_INFO); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL v2"); diff --git a/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-hub.c b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-hub.c new file mode 100644 index 0000000000..8cabaf902d --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-hub.c @@ -0,0 +1,430 @@ +/* + * ADM5120 HCD (Host Controller Driver) for USB + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: drivers/usb/host/ohci-hub.c + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2004 David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +/*-------------------------------------------------------------------------*/ + +/* + * ADM5120 Root Hub ... the nonsharable stuff + */ + +#define dbg_port(hc, label, num, value) \ + admhc_dbg(hc, \ + "%s port%d " \ + "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \ + label, num, value, \ + (value & ADMHC_PS_PRSC) ? " PRSC" : "", \ + (value & ADMHC_PS_OCIC) ? " OCIC" : "", \ + (value & ADMHC_PS_PSSC) ? " PSSC" : "", \ + (value & ADMHC_PS_PESC) ? " PESC" : "", \ + (value & ADMHC_PS_CSC) ? " CSC" : "", \ + \ + (value & ADMHC_PS_LSDA) ? " LSDA" : "", \ + (value & ADMHC_PS_PPS) ? " PPS" : "", \ + (value & ADMHC_PS_PRS) ? " PRS" : "", \ + (value & ADMHC_PS_POCI) ? " POCI" : "", \ + (value & ADMHC_PS_PSS) ? " PSS" : "", \ + \ + (value & ADMHC_PS_PES) ? " PES" : "", \ + (value & ADMHC_PS_CCS) ? " CCS" : "" \ + ); + +#define dbg_port_write(hc, label, num, value) \ + admhc_dbg(hc, \ + "%s port%d " \ + "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \ + label, num, value, \ + (value & ADMHC_PS_PRSC) ? " PRSC" : "", \ + (value & ADMHC_PS_OCIC) ? " OCIC" : "", \ + (value & ADMHC_PS_PSSC) ? " PSSC" : "", \ + (value & ADMHC_PS_PESC) ? " PESC" : "", \ + (value & ADMHC_PS_CSC) ? " CSC" : "", \ + \ + (value & ADMHC_PS_CPP) ? " CPP" : "", \ + (value & ADMHC_PS_SPP) ? " SPP" : "", \ + (value & ADMHC_PS_SPR) ? " SPR" : "", \ + (value & ADMHC_PS_CPS) ? " CPS" : "", \ + (value & ADMHC_PS_SPS) ? " SPS" : "", \ + \ + (value & ADMHC_PS_SPE) ? " SPE" : "", \ + (value & ADMHC_PS_CPE) ? " CPE" : "" \ + ); + +/*-------------------------------------------------------------------------*/ + +/* build "status change" packet (one or two bytes) from HC registers */ + +static int +admhc_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + int i, changed = 0, length = 1; + int any_connected = 0; + unsigned long flags; + u32 status; + + spin_lock_irqsave(&ahcd->lock, flags); + if (!HCD_HW_ACCESSIBLE(hcd)) + goto done; + + /* init status */ + status = admhc_read_rhdesc(ahcd); + if (status & (ADMHC_RH_LPSC | ADMHC_RH_OCIC)) + buf[0] = changed = 1; + else + buf[0] = 0; + if (ahcd->num_ports > 7) { + buf[1] = 0; + length++; + } + + /* look at each port */ + for (i = 0; i < ahcd->num_ports; i++) { + status = admhc_read_portstatus(ahcd, i); + + /* can't autostop if ports are connected */ + any_connected |= (status & ADMHC_PS_CCS); + + if (status & (ADMHC_PS_CSC | ADMHC_PS_PESC | ADMHC_PS_PSSC + | ADMHC_PS_OCIC | ADMHC_PS_PRSC)) { + changed = 1; + if (i < 7) + buf[0] |= 1 << (i + 1); + else + buf[1] |= 1 << (i - 7); + } + } + + if (admhc_root_hub_state_changes(ahcd, changed, + any_connected)) + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + else + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + +done: + spin_unlock_irqrestore(&ahcd->lock, flags); + + return changed ? length : 0; +} + +/*-------------------------------------------------------------------------*/ + +static int admhc_get_hub_descriptor(struct admhcd *ahcd, char *buf) +{ + struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf; + u32 rh = admhc_read_rhdesc(ahcd); + u16 temp; + + desc->bDescriptorType = USB_DT_HUB; /* Hub-descriptor */ + desc->bPwrOn2PwrGood = ADMHC_POTPGT/2; /* use default value */ + desc->bHubContrCurrent = 0x00; /* 0mA */ + + desc->bNbrPorts = ahcd->num_ports; + temp = 1 + (ahcd->num_ports / 8); + desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp; + + /* FIXME */ + temp = 0; + if (rh & ADMHC_RH_NPS) /* no power switching? */ + temp |= 0x0002; + if (rh & ADMHC_RH_PSM) /* per-port power switching? */ + temp |= 0x0001; + if (rh & ADMHC_RH_NOCP) /* no overcurrent reporting? */ + temp |= 0x0010; + else if (rh & ADMHC_RH_OCPM) /* per-port overcurrent reporting? */ + temp |= 0x0008; + desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ahcd, temp); + + /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + desc->u.hs.DeviceRemovable[0] = 0; + desc->u.hs.DeviceRemovable[0] = ~0; + + return 0; +} + +static int admhc_get_hub_status(struct admhcd *ahcd, char *buf) +{ + struct usb_hub_status *hs = (struct usb_hub_status *)buf; + u32 t = admhc_read_rhdesc(ahcd); + u16 status, change; + + status = 0; + status |= (t & ADMHC_RH_LPS) ? HUB_STATUS_LOCAL_POWER : 0; + status |= (t & ADMHC_RH_OCI) ? HUB_STATUS_OVERCURRENT : 0; + + change = 0; + change |= (t & ADMHC_RH_LPSC) ? HUB_CHANGE_LOCAL_POWER : 0; + change |= (t & ADMHC_RH_OCIC) ? HUB_CHANGE_OVERCURRENT : 0; + + hs->wHubStatus = (__force __u16)cpu_to_hc16(ahcd, status); + hs->wHubChange = (__force __u16)cpu_to_hc16(ahcd, change); + + return 0; +} + +static int admhc_get_port_status(struct admhcd *ahcd, unsigned port, char *buf) +{ + struct usb_port_status *ps = (struct usb_port_status *)buf; + u32 t = admhc_read_portstatus(ahcd, port); + u16 status, change; + + status = 0; + status |= (t & ADMHC_PS_CCS) ? USB_PORT_STAT_CONNECTION : 0; + status |= (t & ADMHC_PS_PES) ? USB_PORT_STAT_ENABLE : 0; + status |= (t & ADMHC_PS_PSS) ? USB_PORT_STAT_SUSPEND : 0; + status |= (t & ADMHC_PS_POCI) ? USB_PORT_STAT_OVERCURRENT : 0; + status |= (t & ADMHC_PS_PRS) ? USB_PORT_STAT_RESET : 0; + status |= (t & ADMHC_PS_PPS) ? USB_PORT_STAT_POWER : 0; + status |= (t & ADMHC_PS_LSDA) ? USB_PORT_STAT_LOW_SPEED : 0; + + change = 0; + change |= (t & ADMHC_PS_CSC) ? USB_PORT_STAT_C_CONNECTION : 0; + change |= (t & ADMHC_PS_PESC) ? USB_PORT_STAT_C_ENABLE : 0; + change |= (t & ADMHC_PS_PSSC) ? USB_PORT_STAT_C_SUSPEND : 0; + change |= (t & ADMHC_PS_OCIC) ? USB_PORT_STAT_C_OVERCURRENT : 0; + change |= (t & ADMHC_PS_PRSC) ? USB_PORT_STAT_C_RESET : 0; + + ps->wPortStatus = (__force __u16)cpu_to_hc16(ahcd, status); + ps->wPortChange = (__force __u16)cpu_to_hc16(ahcd, change); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_OTG + +static int admhc_start_port_reset(struct usb_hcd *hcd, unsigned port) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + u32 status; + + if (!port) + return -EINVAL; + port--; + + /* start port reset before HNP protocol times out */ + status = admhc_read_portstatus(ahcd, port); + if (!(status & ADMHC_PS_CCS)) + return -ENODEV; + + /* khubd will finish the reset later */ + admhc_write_portstatus(ahcd, port, ADMHC_PS_PRS); + return 0; +} + +static void start_hnp(struct admhcd *ahcd); + +#else + +#define admhc_start_port_reset NULL + +#endif + +/*-------------------------------------------------------------------------*/ + + +/* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling, + * not necessarily continuous ... to guard against resume signaling. + * The short timeout is safe for non-root hubs, and is backward-compatible + * with earlier Linux hosts. + */ +#ifdef CONFIG_USB_SUSPEND +#define PORT_RESET_MSEC 50 +#else +#define PORT_RESET_MSEC 10 +#endif + +/* this timer value might be vendor-specific ... */ +#define PORT_RESET_HW_MSEC 10 + +/* wrap-aware logic morphed from */ +#define tick_before(t1, t2) ((s16)(((s16)(t1)) - ((s16)(t2))) < 0) + +/* called from some task, normally khubd */ +static inline int admhc_port_reset(struct admhcd *ahcd, unsigned port) +{ + u32 t; + + admhc_vdbg(ahcd, "reset port%d\n", port); + t = admhc_read_portstatus(ahcd, port); + if (!(t & ADMHC_PS_CCS)) + return -ENODEV; + + admhc_write_portstatus(ahcd, port, ADMHC_PS_SPR); + mdelay(10); + admhc_write_portstatus(ahcd, port, (ADMHC_PS_SPE | ADMHC_PS_CSC)); + mdelay(100); + + return 0; +} + +static inline int admhc_port_enable(struct admhcd *ahcd, unsigned port) +{ + u32 t; + + admhc_vdbg(ahcd, "enable port%d\n", port); + t = admhc_read_portstatus(ahcd, port); + if (!(t & ADMHC_PS_CCS)) + return -ENODEV; + + admhc_write_portstatus(ahcd, port, ADMHC_PS_SPE); + + return 0; +} + +static inline int admhc_port_disable(struct admhcd *ahcd, unsigned port) +{ + u32 t; + + admhc_vdbg(ahcd, "disable port%d\n", port); + t = admhc_read_portstatus(ahcd, port); + if (!(t & ADMHC_PS_CCS)) + return -ENODEV; + + admhc_write_portstatus(ahcd, port, ADMHC_PS_CPE); + + return 0; +} + +static inline int admhc_port_write(struct admhcd *ahcd, unsigned port, + u32 val) +{ +#ifdef ADMHC_VERBOSE_DEBUG + dbg_port_write(ahcd, "write", port, val); +#endif + admhc_write_portstatus(ahcd, port, val); + + return 0; +} + +static int admhc_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + int ports = ahcd->num_ports; + int ret = 0; + + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) + return -ESHUTDOWN; + + switch (typeReq) { + case ClearHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: +#if 0 /* FIXME */ + admhc_writel(ahcd, ADMHC_RH_OCIC, + &ahcd->regs->roothub.status); +#endif + case C_HUB_LOCAL_POWER: + break; + default: + goto error; + } + break; + case ClearPortFeature: + if (!wIndex || wIndex > ports) + goto error; + wIndex--; + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + ret = admhc_port_disable(ahcd, wIndex); + break; + case USB_PORT_FEAT_SUSPEND: + ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPS); + break; + case USB_PORT_FEAT_POWER: + ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPP); + break; + case USB_PORT_FEAT_C_CONNECTION: + ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CSC); + break; + case USB_PORT_FEAT_C_ENABLE: + ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PESC); + break; + case USB_PORT_FEAT_C_SUSPEND: + ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PSSC); + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_OCIC); + break; + case USB_PORT_FEAT_C_RESET: + ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PRSC); + break; + default: + goto error; + } + break; + case GetHubDescriptor: + ret = admhc_get_hub_descriptor(ahcd, buf); + break; + case GetHubStatus: + ret = admhc_get_hub_status(ahcd, buf); + break; + case GetPortStatus: + if (!wIndex || wIndex > ports) + goto error; + wIndex--; + + ret = admhc_get_port_status(ahcd, wIndex, buf); + break; + case SetHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + /* FIXME: this can be cleared, yes? */ + case C_HUB_LOCAL_POWER: + break; + default: + goto error; + } + break; + case SetPortFeature: + if (!wIndex || wIndex > ports) + goto error; + wIndex--; + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + ret = admhc_port_enable(ahcd, wIndex); + break; + case USB_PORT_FEAT_RESET: + ret = admhc_port_reset(ahcd, wIndex); + break; + case USB_PORT_FEAT_SUSPEND: +#ifdef CONFIG_USB_OTG + if (hcd->self.otg_port == (wIndex + 1) + && hcd->self.b_hnp_enable) + start_hnp(ahcd); + else +#endif + ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPS); + break; + case USB_PORT_FEAT_POWER: + ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPP); + break; + default: + goto error; + } + break; + + default: +error: + /* "protocol stall" on error */ + ret = -EPIPE; + } + + return ret; +} + diff --git a/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-mem.c b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-mem.c new file mode 100644 index 0000000000..79fff70e2d --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-mem.c @@ -0,0 +1,202 @@ +/* + * ADM5120 HCD (Host Controller Driver) for USB + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: drivers/usb/host/ohci-mem.c + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2002 David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +/*-------------------------------------------------------------------------*/ + +/* + * OHCI deals with three types of memory: + * - data used only by the HCD ... kmalloc is fine + * - async and periodic schedules, shared by HC and HCD ... these + * need to use dma_pool or dma_alloc_coherent + * - driver buffers, read/written by HC ... the hcd glue or the + * device driver provides us with dma addresses + * + * There's also "register" data, which is memory mapped. + * No memory seen by this driver (or any HCD) may be paged out. + */ + +/*-------------------------------------------------------------------------*/ + +static void admhc_hcd_init(struct admhcd *ahcd) +{ + ahcd->next_statechange = jiffies; + spin_lock_init(&ahcd->lock); + INIT_LIST_HEAD(&ahcd->pending); +} + +/*-------------------------------------------------------------------------*/ + +static int admhc_mem_init(struct admhcd *ahcd) +{ + ahcd->td_cache = dma_pool_create("admhc_td", + admhcd_to_hcd(ahcd)->self.controller, + sizeof(struct td), + TD_ALIGN, /* byte alignment */ + 0 /* no page-crossing issues */ + ); + if (!ahcd->td_cache) + goto err; + + ahcd->ed_cache = dma_pool_create("admhc_ed", + admhcd_to_hcd(ahcd)->self.controller, + sizeof(struct ed), + ED_ALIGN, /* byte alignment */ + 0 /* no page-crossing issues */ + ); + if (!ahcd->ed_cache) + goto err_td_cache; + + return 0; + +err_td_cache: + dma_pool_destroy(ahcd->td_cache); + ahcd->td_cache = NULL; +err: + return -ENOMEM; +} + +static void admhc_mem_cleanup(struct admhcd *ahcd) +{ + if (ahcd->td_cache) { + dma_pool_destroy(ahcd->td_cache); + ahcd->td_cache = NULL; + } + + if (ahcd->ed_cache) { + dma_pool_destroy(ahcd->ed_cache); + ahcd->ed_cache = NULL; + } +} + +/*-------------------------------------------------------------------------*/ + +/* ahcd "done list" processing needs this mapping */ +static inline struct td *dma_to_td(struct admhcd *ahcd, dma_addr_t td_dma) +{ + struct td *td; + + td_dma &= TD_MASK; + td = ahcd->td_hash[TD_HASH_FUNC(td_dma)]; + while (td && td->td_dma != td_dma) + td = td->td_hash; + + return td; +} + +/* TDs ... */ +static struct td *td_alloc(struct admhcd *ahcd, gfp_t mem_flags) +{ + dma_addr_t dma; + struct td *td; + + td = dma_pool_alloc(ahcd->td_cache, mem_flags, &dma); + if (!td) + return NULL; + + /* in case ahcd fetches it, make it look dead */ + memset(td, 0, sizeof *td); + td->hwNextTD = cpu_to_hc32(ahcd, dma); + td->td_dma = dma; + /* hashed in td_fill */ + + return td; +} + +static void td_free(struct admhcd *ahcd, struct td *td) +{ + struct td **prev = &ahcd->td_hash[TD_HASH_FUNC(td->td_dma)]; + + while (*prev && *prev != td) + prev = &(*prev)->td_hash; + if (*prev) + *prev = td->td_hash; +#if 0 + /* TODO: remove */ + else if ((td->hwINFO & cpu_to_hc32(ahcd, TD_DONE)) != 0) + admhc_dbg(ahcd, "no hash for td %p\n", td); +#else + else if ((td->flags & TD_FLAG_DONE) != 0) + admhc_dbg(ahcd, "no hash for td %p\n", td); +#endif + dma_pool_free(ahcd->td_cache, td, td->td_dma); +} + +/*-------------------------------------------------------------------------*/ + +/* EDs ... */ +static struct ed *ed_alloc(struct admhcd *ahcd, gfp_t mem_flags) +{ + dma_addr_t dma; + struct ed *ed; + + ed = dma_pool_alloc(ahcd->ed_cache, mem_flags, &dma); + if (!ed) + return NULL; + + memset(ed, 0, sizeof(*ed)); + ed->dma = dma; + + INIT_LIST_HEAD(&ed->td_list); + INIT_LIST_HEAD(&ed->urb_list); + + return ed; +} + +static void ed_free(struct admhcd *ahcd, struct ed *ed) +{ + dma_pool_free(ahcd->ed_cache, ed, ed->dma); +} + +/*-------------------------------------------------------------------------*/ + +/* URB priv ... */ +static void urb_priv_free(struct admhcd *ahcd, struct urb_priv *urb_priv) +{ + int i; + + for (i = 0; i < urb_priv->td_cnt; i++) + if (urb_priv->td[i]) + td_free(ahcd, urb_priv->td[i]); + + list_del(&urb_priv->pending); + kfree(urb_priv); +} + +static struct urb_priv *urb_priv_alloc(struct admhcd *ahcd, int num_tds, + gfp_t mem_flags) +{ + struct urb_priv *priv; + + /* allocate the private part of the URB */ + priv = kzalloc(sizeof(*priv) + sizeof(struct td) * num_tds, mem_flags); + if (!priv) + goto err; + + /* allocate the TDs (deferring hash chain updates) */ + for (priv->td_cnt = 0; priv->td_cnt < num_tds; priv->td_cnt++) { + priv->td[priv->td_cnt] = td_alloc(ahcd, mem_flags); + if (priv->td[priv->td_cnt] == NULL) + goto err_free; + } + + INIT_LIST_HEAD(&priv->pending); + + return priv; + +err_free: + urb_priv_free(ahcd, priv); +err: + return NULL; +} diff --git a/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-pm.c b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-pm.c new file mode 100644 index 0000000000..7d7fc2438f --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-pm.c @@ -0,0 +1,449 @@ +/* + * ADM5120 HCD (Host Controller Driver) for USB + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from fragments of the OHCI driver. + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2004 David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#define OHCI_SCHED_ENABLES \ + (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE) + +#ifdef CONFIG_PM +static int admhc_restart(struct admhcd *ahcd); + +static int admhc_rh_suspend(struct admhcd *ahcd, int autostop) +__releases(ahcd->lock) +__acquires(ahcd->lock) +{ + int status = 0; + + ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control); + switch (ahcd->hc_control & OHCI_CTRL_HCFS) { + case OHCI_USB_RESUME: + admhc_dbg(ahcd, "resume/suspend?\n"); + ahcd->hc_control &= ~OHCI_CTRL_HCFS; + ahcd->hc_control |= OHCI_USB_RESET; + admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control); + (void) admhc_readl(ahcd, &ahcd->regs->control); + /* FALL THROUGH */ + case OHCI_USB_RESET: + status = -EBUSY; + admhc_dbg(ahcd, "needs reinit!\n"); + goto done; + case OHCI_USB_SUSPEND: + if (!ahcd->autostop) { + admhc_dbg(ahcd, "already suspended\n"); + goto done; + } + } + admhc_dbg(ahcd, "%s root hub\n", + autostop ? "auto-stop" : "suspend"); + + /* First stop any processing */ + if (!autostop && (ahcd->hc_control & OHCI_SCHED_ENABLES)) { + ahcd->hc_control &= ~OHCI_SCHED_ENABLES; + admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control); + ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control); + admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->intrstatus); + + /* sched disables take effect on the next frame, + * then the last WDH could take 6+ msec + */ + admhc_dbg(ahcd, "stopping schedules ...\n"); + ahcd->autostop = 0; + spin_unlock_irq (&ahcd->lock); + msleep (8); + spin_lock_irq(&ahcd->lock); + } + dl_done_list (ahcd); + finish_unlinks (ahcd, admhc_frame_no(ahcd)); + + /* maybe resume can wake root hub */ + if (device_may_wakeup(&admhcd_to_hcd(ahcd)->self.root_hub->dev) || + autostop) + ahcd->hc_control |= OHCI_CTRL_RWE; + else { + admhc_writel(ahcd, OHCI_INTR_RHSC, &ahcd->regs->intrdisable); + ahcd->hc_control &= ~OHCI_CTRL_RWE; + } + + /* Suspend hub ... this is the "global (to this bus) suspend" mode, + * which doesn't imply ports will first be individually suspended. + */ + ahcd->hc_control &= ~OHCI_CTRL_HCFS; + ahcd->hc_control |= OHCI_USB_SUSPEND; + admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control); + (void) admhc_readl(ahcd, &ahcd->regs->control); + + /* no resumes until devices finish suspending */ + if (!autostop) { + ahcd->next_statechange = jiffies + msecs_to_jiffies (5); + ahcd->autostop = 0; + } + +done: + return status; +} + +static inline struct ed *find_head(struct ed *ed) +{ + /* for bulk and control lists */ + while (ed->ed_prev) + ed = ed->ed_prev; + return ed; +} + +/* caller has locked the root hub */ +static int admhc_rh_resume(struct admhcd *ahcd) +__releases(ahcd->lock) +__acquires(ahcd->lock) +{ + struct usb_hcd *hcd = admhcd_to_hcd (ahcd); + u32 temp, enables; + int status = -EINPROGRESS; + int autostopped = ahcd->autostop; + + ahcd->autostop = 0; + ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control); + + if (ahcd->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) { + /* this can happen after resuming a swsusp snapshot */ + if (hcd->state == HC_STATE_RESUMING) { + admhc_dbg(ahcd, "BIOS/SMM active, control %03x\n", + ahcd->hc_control); + status = -EBUSY; + /* this happens when pmcore resumes HC then root */ + } else { + admhc_dbg(ahcd, "duplicate resume\n"); + status = 0; + } + } else switch (ahcd->hc_control & OHCI_CTRL_HCFS) { + case OHCI_USB_SUSPEND: + ahcd->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES); + ahcd->hc_control |= OHCI_USB_RESUME; + admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control); + (void) admhc_readl(ahcd, &ahcd->regs->control); + admhc_dbg(ahcd, "%s root hub\n", + autostopped ? "auto-start" : "resume"); + break; + case OHCI_USB_RESUME: + /* HCFS changes sometime after INTR_RD */ + admhc_dbg(ahcd, "%swakeup root hub\n", + autostopped ? "auto-" : ""); + break; + case OHCI_USB_OPER: + /* this can happen after resuming a swsusp snapshot */ + admhc_dbg(ahcd, "snapshot resume? reinit\n"); + status = -EBUSY; + break; + default: /* RESET, we lost power */ + admhc_dbg(ahcd, "lost power\n"); + status = -EBUSY; + } + if (status == -EBUSY) { + if (!autostopped) { + spin_unlock_irq (&ahcd->lock); + (void) ahcd_init (ahcd); + status = admhc_restart (ahcd); + spin_lock_irq(&ahcd->lock); + } + return status; + } + if (status != -EINPROGRESS) + return status; + if (autostopped) + goto skip_resume; + spin_unlock_irq (&ahcd->lock); + + /* Some controllers (lucent erratum) need extra-long delays */ + msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1); + + temp = admhc_readl(ahcd, &ahcd->regs->control); + temp &= OHCI_CTRL_HCFS; + if (temp != OHCI_USB_RESUME) { + admhc_err (ahcd, "controller won't resume\n"); + spin_lock_irq(&ahcd->lock); + return -EBUSY; + } + + /* disable old schedule state, reinit from scratch */ + admhc_writel(ahcd, 0, &ahcd->regs->ed_controlhead); + admhc_writel(ahcd, 0, &ahcd->regs->ed_controlcurrent); + admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkhead); + admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkcurrent); + admhc_writel(ahcd, 0, &ahcd->regs->ed_periodcurrent); + admhc_writel(ahcd, (u32) ahcd->hcca_dma, &ahcd->ahcd->regs->hcca); + + /* Sometimes PCI D3 suspend trashes frame timings ... */ + periodic_reinit(ahcd); + + /* the following code is executed with ahcd->lock held and + * irqs disabled if and only if autostopped is true + */ + +skip_resume: + /* interrupts might have been disabled */ + admhc_writel(ahcd, OHCI_INTR_INIT, &ahcd->regs->int_enable); + if (ahcd->ed_rm_list) + admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->int_enable); + + /* Then re-enable operations */ + admhc_writel(ahcd, OHCI_USB_OPER, &ahcd->regs->control); + (void) admhc_readl(ahcd, &ahcd->regs->control); + if (!autostopped) + msleep (3); + + temp = ahcd->hc_control; + temp &= OHCI_CTRL_RWC; + temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER; + ahcd->hc_control = temp; + admhc_writel(ahcd, temp, &ahcd->regs->control); + (void) admhc_readl(ahcd, &ahcd->regs->control); + + /* TRSMRCY */ + if (!autostopped) { + msleep (10); + spin_lock_irq(&ahcd->lock); + } + /* now ahcd->lock is always held and irqs are always disabled */ + + /* keep it alive for more than ~5x suspend + resume costs */ + ahcd->next_statechange = jiffies + STATECHANGE_DELAY; + + /* maybe turn schedules back on */ + enables = 0; + temp = 0; + if (!ahcd->ed_rm_list) { + if (ahcd->ed_controltail) { + admhc_writel(ahcd, + find_head (ahcd->ed_controltail)->dma, + &ahcd->regs->ed_controlhead); + enables |= OHCI_CTRL_CLE; + temp |= OHCI_CLF; + } + if (ahcd->ed_bulktail) { + admhc_writel(ahcd, find_head (ahcd->ed_bulktail)->dma, + &ahcd->regs->ed_bulkhead); + enables |= OHCI_CTRL_BLE; + temp |= OHCI_BLF; + } + } + if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs) + enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE; + if (enables) { + admhc_dbg(ahcd, "restarting schedules ... %08x\n", enables); + ahcd->hc_control |= enables; + admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control); + if (temp) + admhc_writel(ahcd, temp, &ahcd->regs->cmdstatus); + (void) admhc_readl(ahcd, &ahcd->regs->control); + } + + return 0; +} + +static int admhc_bus_suspend(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + int rc; + + spin_lock_irq(&ahcd->lock); + + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) + rc = -ESHUTDOWN; + else + rc = admhc_rh_suspend(ahcd, 0); + spin_unlock_irq(&ahcd->lock); + return rc; +} + +static int admhc_bus_resume(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + int rc; + + if (time_before(jiffies, ahcd->next_statechange)) + msleep(5); + + spin_lock_irq(&ahcd->lock); + + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) + rc = -ESHUTDOWN; + else + rc = admhc_rh_resume(ahcd); + spin_unlock_irq(&ahcd->lock); + + /* poll until we know a device is connected or we autostop */ + if (rc == 0) + usb_hcd_poll_rh_status(hcd); + return rc; +} + +/* Carry out polling-, autostop-, and autoresume-related state changes */ +static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed, + int any_connected) +{ + int poll_rh = 1; + + switch (ahcd->hc_control & OHCI_CTRL_HCFS) { + + case OHCI_USB_OPER: + /* keep on polling until we know a device is connected + * and RHSC is enabled */ + if (!ahcd->autostop) { + if (any_connected || + !device_may_wakeup(&admhcd_to_hcd(ahcd) + ->self.root_hub->dev)) { + if (admhc_readl(ahcd, &ahcd->regs->int_enable) & + OHCI_INTR_RHSC) + poll_rh = 0; + } else { + ahcd->autostop = 1; + ahcd->next_statechange = jiffies + HZ; + } + + /* if no devices have been attached for one second, autostop */ + } else { + if (changed || any_connected) { + ahcd->autostop = 0; + ahcd->next_statechange = jiffies + + STATECHANGE_DELAY; + } else if (time_after_eq(jiffies, + ahcd->next_statechange) + && !ahcd->ed_rm_list + && !(ahcd->hc_control & + OHCI_SCHED_ENABLES)) { + ahcd_rh_suspend(ahcd, 1); + } + } + break; + + /* if there is a port change, autostart or ask to be resumed */ + case OHCI_USB_SUSPEND: + case OHCI_USB_RESUME: + if (changed) { + if (ahcd->autostop) + admhc_rh_resume(ahcd); + else + usb_hcd_resume_root_hub(admhcd_to_hcd(ahcd)); + } else { + /* everything is idle, no need for polling */ + poll_rh = 0; + } + break; + } + return poll_rh; +} + +/*-------------------------------------------------------------------------*/ + +/* must not be called from interrupt context */ +static int admhc_restart(struct admhcd *ahcd) +{ + int temp; + int i; + struct urb_priv *priv; + + /* mark any devices gone, so they do nothing till khubd disconnects. + * recycle any "live" eds/tds (and urbs) right away. + * later, khubd disconnect processing will recycle the other state, + * (either as disconnect/reconnect, or maybe someday as a reset). + */ + spin_lock_irq(&ahcd->lock); + admhc_disable(ahcd); + usb_root_hub_lost_power(admhcd_to_hcd(ahcd)->self.root_hub); + if (!list_empty(&ahcd->pending)) + admhc_dbg(ahcd, "abort schedule...\n"); + list_for_each_entry(priv, &ahcd->pending, pending) { + struct urb *urb = priv->td[0]->urb; + struct ed *ed = priv->ed; + + switch (ed->state) { + case ED_OPER: + ed->state = ED_UNLINK; + ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE); + ed_deschedule (ahcd, ed); + + ed->ed_next = ahcd->ed_rm_list; + ed->ed_prev = NULL; + ahcd->ed_rm_list = ed; + /* FALLTHROUGH */ + case ED_UNLINK: + break; + default: + admhc_dbg(ahcd, "bogus ed %p state %d\n", + ed, ed->state); + } + + if (!urb->unlinked) + urb->unlinked = -ESHUTDOWN; + } + finish_unlinks(ahcd, 0); + spin_unlock_irq(&ahcd->lock); + + /* paranoia, in case that didn't work: */ + + /* empty the interrupt branches */ + for (i = 0; i < NUM_INTS; i++) ahcd->load[i] = 0; + for (i = 0; i < NUM_INTS; i++) ahcd->hcca->int_table[i] = 0; + + /* no EDs to remove */ + ahcd->ed_rm_list = NULL; + + /* empty control and bulk lists */ + ahcd->ed_controltail = NULL; + ahcd->ed_bulktail = NULL; + + if ((temp = admhc_run(ahcd)) < 0) { + admhc_err(ahcd, "can't restart, %d\n", temp); + return temp; + } else { + /* here we "know" root ports should always stay powered, + * and that if we try to turn them back on the root hub + * will respond to CSC processing. + */ + i = ahcd->num_ports; + while (i--) + admhc_writel(ahcd, RH_PS_PSS, + &ahcd->regs->portstatus[i]); + admhc_dbg(ahcd, "restart complete\n"); + } + return 0; +} + +#else /* CONFIG_PM */ + +static inline int admhc_rh_resume(struct admhcd *ahcd) +{ + return 0; +} + +/* Carry out polling-related state changes. + * autostop isn't used when CONFIG_PM is turned off. + */ +static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed, + int any_connected) +{ + /* If INSM is enabled, don't poll */ + if (admhc_readl(ahcd, &ahcd->regs->int_enable) & ADMHC_INTR_INSM) + return 0; + + /* If no status changes are pending, enable status-change interrupts */ + if (!changed) { + admhc_intr_enable(ahcd, ADMHC_INTR_INSM); + return 0; + } + + return 1; +} + +#endif /* CONFIG_PM */ + diff --git a/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-q.c b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-q.c new file mode 100644 index 0000000000..cd9c8920af --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-q.c @@ -0,0 +1,964 @@ +/* + * ADM5120 HCD (Host Controller Driver) for USB + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: drivers/usb/host/ohci-q.c + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2002 David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include + +/*-------------------------------------------------------------------------*/ + +/* + * URB goes back to driver, and isn't reissued. + * It's completely gone from HC data structures. + * PRECONDITION: ahcd lock held, irqs blocked. + */ +static void +finish_urb(struct admhcd *ahcd, struct urb *urb, int status) +__releases(ahcd->lock) +__acquires(ahcd->lock) +{ + urb_priv_free(ahcd, urb->hcpriv); + + if (likely(status == -EINPROGRESS)) + status = 0; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_ISOCHRONOUS: + admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs--; + break; + case PIPE_INTERRUPT: + admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs--; + break; + } + +#ifdef ADMHC_VERBOSE_DEBUG + urb_print(ahcd, urb, "RET", usb_pipeout(urb->pipe), status); +#endif + + /* urb->complete() can reenter this HCD */ + usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb); + spin_unlock(&ahcd->lock); + usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb, status); + spin_lock(&ahcd->lock); +} + + +/*-------------------------------------------------------------------------* + * ED handling functions + *-------------------------------------------------------------------------*/ + +#if 0 /* FIXME */ +/* search for the right schedule branch to use for a periodic ed. + * does some load balancing; returns the branch, or negative errno. + */ +static int balance(struct admhcd *ahcd, int interval, int load) +{ + int i, branch = -ENOSPC; + + /* iso periods can be huge; iso tds specify frame numbers */ + if (interval > NUM_INTS) + interval = NUM_INTS; + + /* search for the least loaded schedule branch of that period + * that has enough bandwidth left unreserved. + */ + for (i = 0; i < interval ; i++) { + if (branch < 0 || ahcd->load[branch] > ahcd->load[i]) { + int j; + + /* usb 1.1 says 90% of one frame */ + for (j = i; j < NUM_INTS; j += interval) { + if ((ahcd->load[j] + load) > 900) + break; + } + if (j < NUM_INTS) + continue; + branch = i; + } + } + return branch; +} +#endif + +/*-------------------------------------------------------------------------*/ + +#if 0 /* FIXME */ +/* both iso and interrupt requests have periods; this routine puts them + * into the schedule tree in the apppropriate place. most iso devices use + * 1msec periods, but that's not required. + */ +static void periodic_link(struct admhcd *ahcd, struct ed *ed) +{ + unsigned i; + + admhc_vdbg(ahcd, "link %sed %p branch %d [%dus.], interval %d\n", + (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "", + ed, ed->branch, ed->load, ed->interval); + + for (i = ed->branch; i < NUM_INTS; i += ed->interval) { + struct ed **prev = &ahcd->periodic[i]; + __hc32 *prev_p = &ahcd->hcca->int_table[i]; + struct ed *here = *prev; + + /* sorting each branch by period (slow before fast) + * lets us share the faster parts of the tree. + * (plus maybe: put interrupt eds before iso) + */ + while (here && ed != here) { + if (ed->interval > here->interval) + break; + prev = &here->ed_next; + prev_p = &here->hwNextED; + here = *prev; + } + if (ed != here) { + ed->ed_next = here; + if (here) + ed->hwNextED = *prev_p; + wmb(); + *prev = ed; + *prev_p = cpu_to_hc32(ahcd, ed->dma); + wmb(); + } + ahcd->load[i] += ed->load; + } + admhcd_to_hcd(ahcd)->self.bandwidth_allocated += ed->load / ed->interval; +} +#endif + +/* link an ed into the HC chain */ + +static int ed_schedule(struct admhcd *ahcd, struct ed *ed) +{ + struct ed *old_tail; + + if (admhcd_to_hcd(ahcd)->state == HC_STATE_QUIESCING) + return -EAGAIN; + + ed->state = ED_OPER; + + old_tail = ahcd->ed_tails[ed->type]; + + ed->ed_next = old_tail->ed_next; + if (ed->ed_next) { + ed->ed_next->ed_prev = ed; + ed->hwNextED = cpu_to_hc32(ahcd, ed->ed_next->dma); + } + ed->ed_prev = old_tail; + + old_tail->ed_next = ed; + old_tail->hwNextED = cpu_to_hc32(ahcd, ed->dma); + + ahcd->ed_tails[ed->type] = ed; + + admhc_dma_enable(ahcd); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#if 0 /* FIXME */ +/* scan the periodic table to find and unlink this ED */ +static void periodic_unlink(struct admhcd *ahcd, struct ed *ed) +{ + int i; + + for (i = ed->branch; i < NUM_INTS; i += ed->interval) { + struct ed *temp; + struct ed **prev = &ahcd->periodic[i]; + __hc32 *prev_p = &ahcd->hcca->int_table[i]; + + while (*prev && (temp = *prev) != ed) { + prev_p = &temp->hwNextED; + prev = &temp->ed_next; + } + if (*prev) { + *prev_p = ed->hwNextED; + *prev = ed->ed_next; + } + ahcd->load[i] -= ed->load; + } + + admhcd_to_hcd(ahcd)->self.bandwidth_allocated -= ed->load / ed->interval; + admhc_vdbg(ahcd, "unlink %sed %p branch %d [%dus.], interval %d\n", + (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "", + ed, ed->branch, ed->load, ed->interval); +} +#endif + +/* unlink an ed from the HC chain. + * just the link to the ed is unlinked. + * the link from the ed still points to another operational ed or 0 + * so the HC can eventually finish the processing of the unlinked ed + * (assuming it already started that, which needn't be true). + * + * ED_UNLINK is a transient state: the HC may still see this ED, but soon + * it won't. ED_SKIP means the HC will finish its current transaction, + * but won't start anything new. The TD queue may still grow; device + * drivers don't know about this HCD-internal state. + * + * When the HC can't see the ED, something changes ED_UNLINK to one of: + * + * - ED_OPER: when there's any request queued, the ED gets rescheduled + * immediately. HC should be working on them. + * + * - ED_IDLE: when there's no TD queue. there's no reason for the HC + * to care about this ED; safe to disable the endpoint. + * + * When finish_unlinks() runs later, after SOF interrupt, it will often + * complete one or more URB unlinks before making that state change. + */ +static void ed_deschedule(struct admhcd *ahcd, struct ed *ed) +{ + +#ifdef ADMHC_VERBOSE_DEBUG + admhc_dump_ed(ahcd, "ED-DESCHED", ed, 1); +#endif + + ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP); + wmb(); + ed->state = ED_UNLINK; + + /* remove this ED from the HC list */ + ed->ed_prev->hwNextED = ed->hwNextED; + + /* and remove it from our list also */ + ed->ed_prev->ed_next = ed->ed_next; + + if (ed->ed_next) + ed->ed_next->ed_prev = ed->ed_prev; + + if (ahcd->ed_tails[ed->type] == ed) + ahcd->ed_tails[ed->type] = ed->ed_prev; +} + +/*-------------------------------------------------------------------------*/ + +static struct ed *ed_create(struct admhcd *ahcd, unsigned int type, u32 info) +{ + struct ed *ed; + struct td *td; + + ed = ed_alloc(ahcd, GFP_ATOMIC); + if (!ed) + goto err; + + /* dummy td; end of td list for this ed */ + td = td_alloc(ahcd, GFP_ATOMIC); + if (!td) + goto err_free_ed; + + switch (type) { + case PIPE_INTERRUPT: + info |= ED_INT; + break; + case PIPE_ISOCHRONOUS: + info |= ED_ISO; + break; + } + + ed->dummy = td; + ed->state = ED_IDLE; + ed->type = type; + + ed->hwINFO = cpu_to_hc32(ahcd, info); + ed->hwTailP = cpu_to_hc32(ahcd, td->td_dma); + ed->hwHeadP = ed->hwTailP; /* ED_C, ED_H zeroed */ + + return ed; + +err_free_ed: + ed_free(ahcd, ed); +err: + return NULL; +} + +/* get and maybe (re)init an endpoint. init _should_ be done only as part + * of enumeration, usb_set_configuration() or usb_set_interface(). + */ +static struct ed *ed_get(struct admhcd *ahcd, struct usb_host_endpoint *ep, + struct usb_device *udev, unsigned int pipe, int interval) +{ + struct ed *ed; + unsigned long flags; + + spin_lock_irqsave(&ahcd->lock, flags); + + ed = ep->hcpriv; + if (!ed) { + u32 info; + + /* FIXME: usbcore changes dev->devnum before SET_ADDRESS + * succeeds ... otherwise we wouldn't need "pipe". + */ + info = usb_pipedevice(pipe); + info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << ED_EN_SHIFT; + info |= le16_to_cpu(ep->desc.wMaxPacketSize) << ED_MPS_SHIFT; + if (udev->speed == USB_SPEED_FULL) + info |= ED_SPEED_FULL; + + ed = ed_create(ahcd, usb_pipetype(pipe), info); + if (ed) + ep->hcpriv = ed; + } + + spin_unlock_irqrestore(&ahcd->lock, flags); + + return ed; +} + +/*-------------------------------------------------------------------------*/ + +/* request unlinking of an endpoint from an operational HC. + * put the ep on the rm_list + * real work is done at the next start frame (SOFI) hardware interrupt + * caller guarantees HCD is running, so hardware access is safe, + * and that ed->state is ED_OPER + */ +static void start_ed_unlink(struct admhcd *ahcd, struct ed *ed) +{ + +#ifdef ADMHC_VERBOSE_DEBUG + admhc_dump_ed(ahcd, "ED-UNLINK", ed, 1); +#endif + + ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE); + ed_deschedule(ahcd, ed); + + /* add this ED into the remove list */ + ed->ed_rm_next = ahcd->ed_rm_list; + ahcd->ed_rm_list = ed; + + /* enable SOF interrupt */ + admhc_intr_ack(ahcd, ADMHC_INTR_SOFI); + admhc_intr_enable(ahcd, ADMHC_INTR_SOFI); + /* flush those writes */ + admhc_writel_flush(ahcd); + + /* SOF interrupt might get delayed; record the frame counter value that + * indicates when the HC isn't looking at it, so concurrent unlinks + * behave. frame_no wraps every 2^16 msec, and changes right before + * SOF is triggered. + */ + ed->tick = admhc_frame_no(ahcd) + 1; +} + +/*-------------------------------------------------------------------------* + * TD handling functions + *-------------------------------------------------------------------------*/ + +/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */ + +static void +td_fill(struct admhcd *ahcd, u32 info, dma_addr_t data, int len, + struct urb *urb, int index) +{ + struct td *td, *td_pt; + struct urb_priv *urb_priv = urb->hcpriv; + int hash; + u32 cbl = 0; + +#if 1 + if (index == (urb_priv->td_cnt - 1) && + ((urb->transfer_flags & URB_NO_INTERRUPT) == 0)) + cbl |= TD_IE; +#else + if (index == (urb_priv->td_cnt - 1)) + cbl |= TD_IE; +#endif + + /* use this td as the next dummy */ + td_pt = urb_priv->td[index]; + + /* fill the old dummy TD */ + td = urb_priv->td[index] = urb_priv->ed->dummy; + urb_priv->ed->dummy = td_pt; + + td->ed = urb_priv->ed; + td->next_dl_td = NULL; + td->index = index; + td->urb = urb; + td->data_dma = data; + if (!len) + data = 0; + + if (data) + cbl |= (len & TD_BL_MASK); + + info |= TD_OWN; + + /* setup hardware specific fields */ + td->hwINFO = cpu_to_hc32(ahcd, info); + td->hwDBP = cpu_to_hc32(ahcd, data); + td->hwCBL = cpu_to_hc32(ahcd, cbl); + td->hwNextTD = cpu_to_hc32(ahcd, td_pt->td_dma); + + /* append to queue */ + list_add_tail(&td->td_list, &td->ed->td_list); + + /* hash it for later reverse mapping */ + hash = TD_HASH_FUNC(td->td_dma); + td->td_hash = ahcd->td_hash[hash]; + ahcd->td_hash[hash] = td; + + /* HC might read the TD (or cachelines) right away ... */ + wmb(); + td->ed->hwTailP = td->hwNextTD; +} + +/*-------------------------------------------------------------------------*/ + +/* Prepare all TDs of a transfer, and queue them onto the ED. + * Caller guarantees HC is active. + * Usually the ED is already on the schedule, so TDs might be + * processed as soon as they're queued. + */ +static void td_submit_urb(struct admhcd *ahcd, struct urb *urb) +{ + struct urb_priv *urb_priv = urb->hcpriv; + dma_addr_t data; + int data_len = urb->transfer_buffer_length; + int cnt = 0; + u32 info = 0; + int is_out = usb_pipeout(urb->pipe); + u32 toggle = 0; + + /* OHCI handles the bulk/interrupt data toggles itself. We just + * use the device toggle bits for resetting, and rely on the fact + * that resetting toggle is meaningless if the endpoint is active. + */ + + if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), is_out)) { + toggle = TD_T_CARRY; + } else { + toggle = TD_T_DATA0; + usb_settoggle(urb->dev, usb_pipeendpoint (urb->pipe), + is_out, 1); + } + + urb_priv->td_idx = 0; + list_add(&urb_priv->pending, &ahcd->pending); + + if (data_len) + data = urb->transfer_dma; + else + data = 0; + + /* NOTE: TD_CC is set so we can tell which TDs the HC processed by + * using TD_CC_GET, as well as by seeing them on the done list. + * (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.) + */ + switch (urb_priv->ed->type) { + case PIPE_INTERRUPT: + info = is_out + ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT + : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN; + + /* setup service interval and starting frame number */ + info |= (urb->start_frame & TD_FN_MASK); + info |= (urb->interval & TD_ISI_MASK) << TD_ISI_SHIFT; + + td_fill(ahcd, info, data, data_len, urb, cnt); + cnt++; + + admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs++; + break; + + case PIPE_BULK: + info = is_out + ? TD_SCC_NOTACCESSED | TD_DP_OUT + : TD_SCC_NOTACCESSED | TD_DP_IN; + + /* TDs _could_ transfer up to 8K each */ + while (data_len > TD_DATALEN_MAX) { + td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), + data, TD_DATALEN_MAX, urb, cnt); + data += TD_DATALEN_MAX; + data_len -= TD_DATALEN_MAX; + cnt++; + } + + td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), data, + data_len, urb, cnt); + cnt++; + + if ((urb->transfer_flags & URB_ZERO_PACKET) + && (cnt < urb_priv->td_cnt)) { + td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), + 0, 0, urb, cnt); + cnt++; + } + break; + + /* control manages DATA0/DATA1 toggle per-request; SETUP resets it, + * any DATA phase works normally, and the STATUS ack is special. + */ + case PIPE_CONTROL: + /* fill a TD for the setup */ + info = TD_SCC_NOTACCESSED | TD_DP_SETUP | TD_T_DATA0; + td_fill(ahcd, info, urb->setup_dma, 8, urb, cnt++); + + if (data_len > 0) { + /* fill a TD for the data */ + info = TD_SCC_NOTACCESSED | TD_T_DATA1; + info |= is_out ? TD_DP_OUT : TD_DP_IN; + /* NOTE: mishandles transfers >8K, some >4K */ + td_fill(ahcd, info, data, data_len, urb, cnt++); + } + + /* fill a TD for the ACK */ + info = (is_out || data_len == 0) + ? TD_SCC_NOTACCESSED | TD_DP_IN | TD_T_DATA1 + : TD_SCC_NOTACCESSED | TD_DP_OUT | TD_T_DATA1; + td_fill(ahcd, info, data, 0, urb, cnt++); + + break; + + /* ISO has no retransmit, so no toggle; + * Each TD could handle multiple consecutive frames (interval 1); + * we could often reduce the number of TDs here. + */ + case PIPE_ISOCHRONOUS: + info = is_out + ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT + : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN; + + for (cnt = 0; cnt < urb->number_of_packets; cnt++) { + int frame = urb->start_frame; + + frame += cnt * urb->interval; + frame &= TD_FN_MASK; + td_fill(ahcd, info | frame, + data + urb->iso_frame_desc[cnt].offset, + urb->iso_frame_desc[cnt].length, urb, cnt); + } + admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs++; + break; + } + + if (urb_priv->td_cnt != cnt) + admhc_err(ahcd, "bad number of tds created for urb %p\n", urb); +} + +/*-------------------------------------------------------------------------* + * Done List handling functions + *-------------------------------------------------------------------------*/ + +/* calculate transfer length/status and update the urb */ +static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td) +{ + struct urb_priv *urb_priv = urb->hcpriv; + u32 info; + u32 bl; + u32 tdDBP; + int type = usb_pipetype(urb->pipe); + int cc; + int status = -EINPROGRESS; + + info = hc32_to_cpup(ahcd, &td->hwINFO); + tdDBP = hc32_to_cpup(ahcd, &td->hwDBP); + bl = TD_BL_GET(hc32_to_cpup(ahcd, &td->hwCBL)); + cc = TD_CC_GET(info); + + /* ISO ... drivers see per-TD length/status */ + if (type == PIPE_ISOCHRONOUS) { + /* TODO */ + int dlen = 0; + + /* NOTE: assumes FC in tdINFO == 0, and that + * only the first of 0..MAXPSW psws is used. + */ + if (info & TD_CC) /* hc didn't touch? */ + return status; + + if (usb_pipeout(urb->pipe)) + dlen = urb->iso_frame_desc[td->index].length; + else { + /* short reads are always OK for ISO */ + if (cc == TD_CC_DATAUNDERRUN) + cc = TD_CC_NOERROR; + dlen = tdDBP - td->data_dma + bl; + } + + urb->actual_length += dlen; + urb->iso_frame_desc[td->index].actual_length = dlen; + urb->iso_frame_desc[td->index].status = cc_to_error[cc]; + + if (cc != TD_CC_NOERROR) + admhc_vdbg(ahcd, + "urb %p iso td %p (%d) len %d cc %d\n", + urb, td, 1 + td->index, dlen, cc); + + /* BULK, INT, CONTROL ... drivers see aggregate length/status, + * except that "setup" bytes aren't counted and "short" transfers + * might not be reported as errors. + */ + } else { + /* update packet status if needed (short is normally ok) */ + if (cc == TD_CC_DATAUNDERRUN + && !(urb->transfer_flags & URB_SHORT_NOT_OK)) + cc = TD_CC_NOERROR; + + if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0) + status = cc_to_error[cc]; + + + /* count all non-empty packets except control SETUP packet */ + if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0) + urb->actual_length += tdDBP - td->data_dma + bl; + + if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0) + admhc_vdbg(ahcd, + "urb %p td %p (%d) cc %d, len=%d/%d\n", + urb, td, td->index, cc, + urb->actual_length, + urb->transfer_buffer_length); + } + + list_del(&td->td_list); + urb_priv->td_idx++; + + return status; +} + +/*-------------------------------------------------------------------------*/ + +static void ed_halted(struct admhcd *ahcd, struct td *td, int cc) +{ + struct urb *urb = td->urb; + struct urb_priv *urb_priv = urb->hcpriv; + struct ed *ed = td->ed; + struct list_head *tmp = td->td_list.next; + __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C); + + admhc_dump_ed(ahcd, "ed halted", td->ed, 1); + /* clear ed halt; this is the td that caused it, but keep it inactive + * until its urb->complete() has a chance to clean up. + */ + ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP); + wmb(); + ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H); + + /* Get rid of all later tds from this urb. We don't have + * to be careful: no errors and nothing was transferred. + * Also patch the ed so it looks as if those tds completed normally. + */ + while (tmp != &ed->td_list) { + struct td *next; + + next = list_entry(tmp, struct td, td_list); + tmp = next->td_list.next; + + if (next->urb != urb) + break; + + /* NOTE: if multi-td control DATA segments get supported, + * this urb had one of them, this td wasn't the last td + * in that segment (TD_R clear), this ed halted because + * of a short read, _and_ URB_SHORT_NOT_OK is clear ... + * then we need to leave the control STATUS packet queued + * and clear ED_SKIP. + */ + list_del(&next->td_list); + urb_priv->td_cnt++; + ed->hwHeadP = next->hwNextTD | toggle; + } + + /* help for troubleshooting: report anything that + * looks odd ... that doesn't include protocol stalls + * (or maybe some other things) + */ + switch (cc) { + case TD_CC_DATAUNDERRUN: + if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0) + break; + /* fallthrough */ + case TD_CC_STALL: + if (usb_pipecontrol(urb->pipe)) + break; + /* fallthrough */ + default: + admhc_dbg(ahcd, + "urb %p path %s ep%d%s %08x cc %d --> status %d\n", + urb, urb->dev->devpath, + usb_pipeendpoint (urb->pipe), + usb_pipein(urb->pipe) ? "in" : "out", + hc32_to_cpu(ahcd, td->hwINFO), + cc, cc_to_error[cc]); + } +} + +/*-------------------------------------------------------------------------*/ + +/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */ +static void +finish_unlinks(struct admhcd *ahcd, u16 tick) +{ + struct ed *ed, **last; + +rescan_all: + for (last = &ahcd->ed_rm_list, ed = *last; ed != NULL; ed = *last) { + struct list_head *entry, *tmp; + int completed, modified; + __hc32 *prev; + + /* only take off EDs that the HC isn't using, accounting for + * frame counter wraps and EDs with partially retired TDs + */ + if (likely(HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))) { + if (tick_before(tick, ed->tick)) { +skip_ed: + last = &ed->ed_rm_next; + continue; + } +#if 0 + if (!list_empty(&ed->td_list)) { + struct td *td; + u32 head; + + td = list_entry(ed->td_list.next, struct td, + td_list); + head = hc32_to_cpu(ahcd, ed->hwHeadP) & + TD_MASK; + + /* INTR_WDH may need to clean up first */ + if (td->td_dma != head) + goto skip_ed; + } +#endif + } + + /* reentrancy: if we drop the schedule lock, someone might + * have modified this list. normally it's just prepending + * entries (which we'd ignore), but paranoia won't hurt. + */ + *last = ed->ed_rm_next; + ed->ed_rm_next = NULL; + modified = 0; + + /* unlink urbs as requested, but rescan the list after + * we call a completion since it might have unlinked + * another (earlier) urb + * + * When we get here, the HC doesn't see this ed. But it + * must not be rescheduled until all completed URBs have + * been given back to the driver. + */ +rescan_this: + completed = 0; + prev = &ed->hwHeadP; + list_for_each_safe(entry, tmp, &ed->td_list) { + struct td *td; + struct urb *urb; + struct urb_priv *urb_priv; + __hc32 savebits; + u32 tdINFO; + int status; + + td = list_entry(entry, struct td, td_list); + urb = td->urb; + urb_priv = td->urb->hcpriv; + + if (!urb->unlinked) { + prev = &td->hwNextTD; + continue; + } + + if ((urb_priv) == NULL) + continue; + + /* patch pointer hc uses */ + savebits = *prev & ~cpu_to_hc32(ahcd, TD_MASK); + *prev = td->hwNextTD | savebits; + /* If this was unlinked, the TD may not have been + * retired ... so manually save dhe data toggle. + * The controller ignores the value we save for + * control and ISO endpoints. + */ + tdINFO = hc32_to_cpup(ahcd, &td->hwINFO); + if ((tdINFO & TD_T) == TD_T_DATA0) + ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_C); + else if ((tdINFO & TD_T) == TD_T_DATA1) + ed->hwHeadP |= cpu_to_hc32(ahcd, ED_C); + + /* HC may have partly processed this TD */ +#ifdef ADMHC_VERBOSE_DEBUG + urb_print(ahcd, urb, "PARTIAL", 0); +#endif + status = td_done(ahcd, urb, td); + + /* if URB is done, clean up */ + if (urb_priv->td_idx == urb_priv->td_cnt) { + modified = completed = 1; + finish_urb(ahcd, urb, status); + } + } + if (completed && !list_empty(&ed->td_list)) + goto rescan_this; + + /* ED's now officially unlinked, hc doesn't see */ + ed->state = ED_IDLE; + ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H); + ed->hwNextED = 0; + wmb(); + ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP | ED_DEQUEUE); + + /* but if there's work queued, reschedule */ + if (!list_empty(&ed->td_list)) { + if (HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state)) + ed_schedule(ahcd, ed); + } + + if (modified) + goto rescan_all; + } +} + +/*-------------------------------------------------------------------------*/ +/* + * Process normal completions (error or success) and clean the schedules. + * + * This is the main path for handing urbs back to drivers. The only other + * normal path is finish_unlinks(), which unlinks URBs using ed_rm_list, + * instead of scanning the (re-reversed) donelist as this does. + */ + +static void ed_unhalt(struct admhcd *ahcd, struct ed *ed, struct urb *urb) +{ + struct list_head *entry, *tmp; + __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C); + +#ifdef ADMHC_VERBOSE_DEBUG + admhc_dump_ed(ahcd, "UNHALT", ed, 0); +#endif + /* clear ed halt; this is the td that caused it, but keep it inactive + * until its urb->complete() has a chance to clean up. + */ + ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP); + wmb(); + ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H); + + list_for_each_safe(entry, tmp, &ed->td_list) { + struct td *td = list_entry(entry, struct td, td_list); + __hc32 info; + + if (td->urb != urb) + break; + + info = td->hwINFO; + info &= ~cpu_to_hc32(ahcd, TD_CC | TD_OWN); + td->hwINFO = info; + + ed->hwHeadP = td->hwNextTD | toggle; + wmb(); + } + +} + +static void ed_intr_refill(struct admhcd *ahcd, struct ed *ed) +{ + __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C); + + ed->hwHeadP = ed->hwTailP | toggle; +} + + +static inline int is_ed_halted(struct admhcd *ahcd, struct ed *ed) +{ + return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) == ED_H); +} + +static inline int is_td_halted(struct admhcd *ahcd, struct ed *ed, + struct td *td) +{ + return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & TD_MASK) == + (hc32_to_cpup(ahcd, &td->hwNextTD) & TD_MASK)); +} + +static void ed_update(struct admhcd *ahcd, struct ed *ed) +{ + struct list_head *entry, *tmp; + +#ifdef ADMHC_VERBOSE_DEBUG + admhc_dump_ed(ahcd, "UPDATE", ed, 1); +#endif + + list_for_each_safe(entry, tmp, &ed->td_list) { + struct td *td = list_entry(entry, struct td, td_list); + struct urb *urb = td->urb; + struct urb_priv *urb_priv = urb->hcpriv; + int status; + + if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN) + break; + + /* update URB's length and status from TD */ + status = td_done(ahcd, urb, td); + if (is_ed_halted(ahcd, ed) && is_td_halted(ahcd, ed, td)) + ed_unhalt(ahcd, ed, urb); + + if (ed->type == PIPE_INTERRUPT) + ed_intr_refill(ahcd, ed); + + /* If all this urb's TDs are done, call complete() */ + if (urb_priv->td_idx == urb_priv->td_cnt) + finish_urb(ahcd, urb, status); + + /* clean schedule: unlink EDs that are no longer busy */ + if (list_empty(&ed->td_list)) { + if (ed->state == ED_OPER) + start_ed_unlink(ahcd, ed); + + /* ... reenabling halted EDs only after fault cleanup */ + } else if ((ed->hwINFO & cpu_to_hc32(ahcd, + ED_SKIP | ED_DEQUEUE)) + == cpu_to_hc32(ahcd, ED_SKIP)) { + td = list_entry(ed->td_list.next, struct td, td_list); +#if 0 + if (!(td->hwINFO & cpu_to_hc32(ahcd, TD_DONE))) { + ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP); + /* ... hc may need waking-up */ + switch (ed->type) { + case PIPE_CONTROL: + admhc_writel(ahcd, OHCI_CLF, + &ahcd->regs->cmdstatus); + break; + case PIPE_BULK: + admhc_writel(ahcd, OHCI_BLF, + &ahcd->regs->cmdstatus); + break; + } + } +#else + if ((td->hwINFO & cpu_to_hc32(ahcd, TD_OWN))) + ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP); +#endif + } + + } +} + +/* there are some tds completed; called in_irq(), with HCD locked */ +static void admhc_td_complete(struct admhcd *ahcd) +{ + struct ed *ed; + + for (ed = ahcd->ed_head; ed; ed = ed->ed_next) { + if (ed->state != ED_OPER) + continue; + + ed_update(ahcd, ed); + } +} diff --git a/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120.h b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120.h new file mode 100644 index 0000000000..e47aac8e7a --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120.h @@ -0,0 +1,755 @@ +/* + * ADM5120 HCD (Host Controller Driver) for USB + * + * Copyright (C) 2007-2008 Gabor Juhos + * + * This file was derived from: drivers/usb/host/ohci.h + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2002 David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +/* + * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to + * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the + * host controller implementation. + */ +typedef __u32 __bitwise __hc32; +typedef __u16 __bitwise __hc16; + +/* + * OHCI Endpoint Descriptor (ED) ... holds TD queue + * See OHCI spec, section 4.2 + * + * This is a "Queue Head" for those transfers, which is why + * both EHCI and UHCI call similar structures a "QH". + */ + +#define TD_DATALEN_MAX 4096 + +#define ED_ALIGN 16 +#define ED_MASK ((u32)~(ED_ALIGN-1)) /* strip hw status in low addr bits */ + +struct ed { + /* first fields are hardware-specified */ + __hc32 hwINFO; /* endpoint config bitmap */ + /* info bits defined by hcd */ +#define ED_DEQUEUE (1 << 27) + /* info bits defined by the hardware */ +#define ED_MPS_SHIFT 16 +#define ED_MPS_MASK ((1 << 11)-1) +#define ED_MPS_GET(x) (((x) >> ED_MPS_SHIFT) & ED_MPS_MASK) +#define ED_ISO (1 << 15) /* isochronous endpoint */ +#define ED_SKIP (1 << 14) +#define ED_SPEED_FULL (1 << 13) /* fullspeed device */ +#define ED_INT (1 << 11) /* interrupt endpoint */ +#define ED_EN_SHIFT 7 /* endpoint shift */ +#define ED_EN_MASK ((1 << 4)-1) /* endpoint mask */ +#define ED_EN_GET(x) (((x) >> ED_EN_SHIFT) & ED_EN_MASK) +#define ED_FA_MASK ((1 << 7)-1) /* function address mask */ +#define ED_FA_GET(x) ((x) & ED_FA_MASK) + __hc32 hwTailP; /* tail of TD list */ + __hc32 hwHeadP; /* head of TD list (hc r/w) */ +#define ED_C (0x02) /* toggle carry */ +#define ED_H (0x01) /* halted */ + __hc32 hwNextED; /* next ED in list */ + + /* rest are purely for the driver's use */ + dma_addr_t dma; /* addr of ED */ + struct td *dummy; /* next TD to activate */ + + struct list_head urb_list; /* list of our URBs */ + + /* host's view of schedule */ + struct ed *ed_next; /* on schedule list */ + struct ed *ed_prev; /* for non-interrupt EDs */ + struct ed *ed_rm_next; /* on rm list */ + struct list_head td_list; /* "shadow list" of our TDs */ + + /* create --> IDLE --> OPER --> ... --> IDLE --> destroy + * usually: OPER --> UNLINK --> (IDLE | OPER) --> ... + */ + u8 state; /* ED_{IDLE,UNLINK,OPER} */ +#define ED_IDLE 0x00 /* NOT linked to HC */ +#define ED_UNLINK 0x01 /* being unlinked from hc */ +#define ED_OPER 0x02 /* IS linked to hc */ + + u8 type; /* PIPE_{BULK,...} */ + + /* periodic scheduling params (for intr and iso) */ + u8 branch; + u16 interval; + u16 load; + u16 last_iso; /* iso only */ + + /* HC may see EDs on rm_list until next frame (frame_no == tick) */ + u16 tick; +} __attribute__ ((aligned(ED_ALIGN))); + +/* + * OHCI Transfer Descriptor (TD) ... one per transfer segment + * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt) + * and 4.3.2 (iso) + */ + +#define TD_ALIGN 32 +#define TD_MASK ((u32)~(TD_ALIGN-1)) /* strip hw status in low addr bits */ + +struct td { + /* first fields are hardware-specified */ + __hc32 hwINFO; /* transfer info bitmask */ + + /* hwINFO bits */ +#define TD_OWN (1 << 31) /* owner of the descriptor */ +#define TD_CC_SHIFT 27 /* condition code */ +#define TD_CC_MASK 0xf +#define TD_CC (TD_CC_MASK << TD_CC_SHIFT) +#define TD_CC_GET(x) (((x) >> TD_CC_SHIFT) & TD_CC_MASK) + +#define TD_EC_SHIFT 25 /* error count */ +#define TD_EC_MASK 0x3 +#define TD_EC (TD_EC_MASK << TD_EC_SHIFT) +#define TD_EC_GET(x) ((x >> TD_EC_SHIFT) & TD_EC_MASK) +#define TD_T_SHIFT 23 /* data toggle state */ +#define TD_T_MASK 0x3 +#define TD_T (TD_T_MASK << TD_T_SHIFT) +#define TD_T_DATA0 (0x2 << TD_T_SHIFT) /* DATA0 */ +#define TD_T_DATA1 (0x3 << TD_T_SHIFT) /* DATA1 */ +#define TD_T_CARRY (0x0 << TD_T_SHIFT) /* uses ED_C */ +#define TD_T_GET(x) (((x) >> TD_T_SHIFT) & TD_T_MASK) +#define TD_DP_SHIFT 21 /* direction/pid */ +#define TD_DP_MASK 0x3 +#define TD_DP (TD_DP_MASK << TD_DP_SHIFT) +#define TD_DP_GET (((x) >> TD_DP_SHIFT) & TD_DP_MASK) +#define TD_DP_SETUP (0x0 << TD_DP_SHIFT) /* SETUP pid */ +#define TD_DP_OUT (0x1 << TD_DP_SHIFT) /* OUT pid */ +#define TD_DP_IN (0x2 << TD_DP_SHIFT) /* IN pid */ +#define TD_ISI_SHIFT 8 /* Interrupt Service Interval */ +#define TD_ISI_MASK 0x3f +#define TD_ISI_GET(x) (((x) >> TD_ISI_SHIFT) & TD_ISI_MASK) +#define TD_FN_MASK 0x3f /* frame number */ +#define TD_FN_GET(x) ((x) & TD_FN_MASK) + + __hc32 hwDBP; /* Data Buffer Pointer (or 0) */ + __hc32 hwCBL; /* Controller/Buffer Length */ + + /* hwCBL bits */ +#define TD_BL_MASK 0xffff /* buffer length */ +#define TD_BL_GET(x) ((x) & TD_BL_MASK) +#define TD_IE (1 << 16) /* interrupt enable */ + __hc32 hwNextTD; /* Next TD Pointer */ + + /* rest are purely for the driver's use */ + __u8 index; + struct ed *ed; + struct td *td_hash; /* dma-->td hashtable */ + struct td *next_dl_td; + struct urb *urb; + + dma_addr_t td_dma; /* addr of this TD */ + dma_addr_t data_dma; /* addr of data it points to */ + + struct list_head td_list; /* "shadow list", TDs on same ED */ + + u32 flags; +#define TD_FLAG_DONE (1 << 17) /* retired to done list */ +#define TD_FLAG_ISO (1 << 16) /* copy of ED_ISO */ +} __attribute__ ((aligned(TD_ALIGN))); /* c/b/i need 16; only iso needs 32 */ + +/* + * Hardware transfer status codes -- CC from td->hwINFO + */ +#define TD_CC_NOERROR 0x00 +#define TD_CC_CRC 0x01 +#define TD_CC_BITSTUFFING 0x02 +#define TD_CC_DATATOGGLEM 0x03 +#define TD_CC_STALL 0x04 +#define TD_CC_DEVNOTRESP 0x05 +#define TD_CC_PIDCHECKFAIL 0x06 +#define TD_CC_UNEXPECTEDPID 0x07 +#define TD_CC_DATAOVERRUN 0x08 +#define TD_CC_DATAUNDERRUN 0x09 + /* 0x0A, 0x0B reserved for hardware */ +#define TD_CC_BUFFEROVERRUN 0x0C +#define TD_CC_BUFFERUNDERRUN 0x0D + /* 0x0E, 0x0F reserved for HCD */ +#define TD_CC_HCD0 0x0E +#define TD_CC_NOTACCESSED 0x0F + +/* + * preshifted status codes + */ +#define TD_SCC_NOTACCESSED (TD_CC_NOTACCESSED << TD_CC_SHIFT) + + +/* map OHCI TD status codes (CC) to errno values */ +static const int cc_to_error[16] = { + /* No Error */ 0, + /* CRC Error */ -EILSEQ, + /* Bit Stuff */ -EPROTO, + /* Data Togg */ -EILSEQ, + /* Stall */ -EPIPE, + /* DevNotResp */ -ETIME, + /* PIDCheck */ -EPROTO, + /* UnExpPID */ -EPROTO, + /* DataOver */ -EOVERFLOW, + /* DataUnder */ -EREMOTEIO, + /* (for hw) */ -EIO, + /* (for hw) */ -EIO, + /* BufferOver */ -ECOMM, + /* BuffUnder */ -ENOSR, + /* (for HCD) */ -EALREADY, + /* (for HCD) */ -EALREADY +}; + +#define NUM_INTS 32 + +/* + * This is the structure of the OHCI controller's memory mapped I/O region. + * You must use readl() and writel() (in ) to access these fields!! + * Layout is in section 7 (and appendix B) of the spec. + */ +struct admhcd_regs { + __hc32 gencontrol; /* General Control */ + __hc32 int_status; /* Interrupt Status */ + __hc32 int_enable; /* Interrupt Enable */ + __hc32 reserved00; + __hc32 host_control; /* Host General Control */ + __hc32 reserved01; + __hc32 fminterval; /* Frame Interval */ + __hc32 fmnumber; /* Frame Number */ + __hc32 reserved02; + __hc32 reserved03; + __hc32 reserved04; + __hc32 reserved05; + __hc32 reserved06; + __hc32 reserved07; + __hc32 reserved08; + __hc32 reserved09; + __hc32 reserved10; + __hc32 reserved11; + __hc32 reserved12; + __hc32 reserved13; + __hc32 reserved14; + __hc32 reserved15; + __hc32 reserved16; + __hc32 reserved17; + __hc32 reserved18; + __hc32 reserved19; + __hc32 reserved20; + __hc32 reserved21; + __hc32 lsthresh; /* Low Speed Threshold */ + __hc32 rhdesc; /* Root Hub Descriptor */ +#define MAX_ROOT_PORTS 2 + __hc32 portstatus[MAX_ROOT_PORTS]; /* Port Status */ + __hc32 hosthead; /* Host Descriptor Head */ +} __attribute__ ((aligned(32))); + +/* + * General Control register bits + */ +#define ADMHC_CTRL_UHFE (1 << 0) /* USB Host Function Enable */ +#define ADMHC_CTRL_SIR (1 << 1) /* Software Interrupt request */ +#define ADMHC_CTRL_DMAA (1 << 2) /* DMA Arbitration Control */ +#define ADMHC_CTRL_SR (1 << 3) /* Software Reset */ + +/* + * Host General Control register bits + */ +#define ADMHC_HC_BUSS 0x3 /* USB bus state */ +#define ADMHC_BUSS_RESET 0x0 +#define ADMHC_BUSS_RESUME 0x1 +#define ADMHC_BUSS_OPER 0x2 +#define ADMHC_BUSS_SUSPEND 0x3 +#define ADMHC_HC_DMAE (1 << 2) /* DMA enable */ + +/* + * Interrupt Status/Enable register bits + */ +#define ADMHC_INTR_SOFI (1 << 4) /* start of frame */ +#define ADMHC_INTR_RESI (1 << 5) /* resume detected */ +#define ADMHC_INTR_6 (1 << 6) /* unknown */ +#define ADMHC_INTR_7 (1 << 7) /* unknown */ +#define ADMHC_INTR_BABI (1 << 8) /* babble detected */ +#define ADMHC_INTR_INSM (1 << 9) /* root hub status change */ +#define ADMHC_INTR_SO (1 << 10) /* scheduling overrun */ +#define ADMHC_INTR_FNO (1 << 11) /* frame number overflow */ +#define ADMHC_INTR_TDC (1 << 20) /* transfer descriptor completed */ +#define ADMHC_INTR_SWI (1 << 29) /* software interrupt */ +#define ADMHC_INTR_FATI (1 << 30) /* fatal error */ +#define ADMHC_INTR_INTA (1 << 31) /* interrupt active */ + +#define ADMHC_INTR_MIE (1 << 31) /* master interrupt enable */ + +/* + * SOF Frame Interval register bits + */ +#define ADMHC_SFI_FI_MASK ((1 << 14)-1) /* Frame Interval value */ +#define ADMHC_SFI_FSLDP_SHIFT 16 +#define ADMHC_SFI_FSLDP_MASK ((1 << 15)-1) +#define ADMHC_SFI_FIT (1 << 31) /* Frame Interval Toggle */ + +/* + * SOF Frame Number register bits + */ +#define ADMHC_SFN_FN_MASK ((1 << 16)-1) /* Frame Number Mask */ +#define ADMHC_SFN_FR_SHIFT 16 /* Frame Remaining Shift */ +#define ADMHC_SFN_FR_MASK ((1 << 14)-1) /* Frame Remaining Mask */ +#define ADMHC_SFN_FRT (1 << 31) /* Frame Remaining Toggle */ + +/* + * Root Hub Descriptor register bits + */ +#define ADMHC_RH_NUMP 0xff /* number of ports */ +#define ADMHC_RH_PSM (1 << 8) /* power switching mode */ +#define ADMHC_RH_NPS (1 << 9) /* no power switching */ +#define ADMHC_RH_OCPM (1 << 10) /* over current protection mode */ +#define ADMHC_RH_NOCP (1 << 11) /* no over current protection */ +#define ADMHC_RH_PPCM (0xff << 16) /* port power control */ + +#define ADMHC_RH_LPS (1 << 24) /* local power switch */ +#define ADMHC_RH_OCI (1 << 25) /* over current indicator */ + +/* status change bits */ +#define ADMHC_RH_LPSC (1 << 26) /* local power switch change */ +#define ADMHC_RH_OCIC (1 << 27) /* over current indicator change */ + +#define ADMHC_RH_DRWE (1 << 28) /* device remote wakeup enable */ +#define ADMHC_RH_CRWE (1 << 29) /* clear remote wakeup enable */ + +#define ADMHC_RH_CGP (1 << 24) /* clear global power */ +#define ADMHC_RH_SGP (1 << 26) /* set global power */ + +/* + * Port Status register bits + */ +#define ADMHC_PS_CCS (1 << 0) /* current connect status */ +#define ADMHC_PS_PES (1 << 1) /* port enable status */ +#define ADMHC_PS_PSS (1 << 2) /* port suspend status */ +#define ADMHC_PS_POCI (1 << 3) /* port over current indicator */ +#define ADMHC_PS_PRS (1 << 4) /* port reset status */ +#define ADMHC_PS_PPS (1 << 8) /* port power status */ +#define ADMHC_PS_LSDA (1 << 9) /* low speed device attached */ + +/* status change bits */ +#define ADMHC_PS_CSC (1 << 16) /* connect status change */ +#define ADMHC_PS_PESC (1 << 17) /* port enable status change */ +#define ADMHC_PS_PSSC (1 << 18) /* port suspend status change */ +#define ADMHC_PS_OCIC (1 << 19) /* over current indicator change */ +#define ADMHC_PS_PRSC (1 << 20) /* port reset status change */ + +/* port feature bits */ +#define ADMHC_PS_CPE (1 << 0) /* clear port enable */ +#define ADMHC_PS_SPE (1 << 1) /* set port enable */ +#define ADMHC_PS_SPS (1 << 2) /* set port suspend */ +#define ADMHC_PS_CPS (1 << 3) /* clear suspend status */ +#define ADMHC_PS_SPR (1 << 4) /* set port reset */ +#define ADMHC_PS_SPP (1 << 8) /* set port power */ +#define ADMHC_PS_CPP (1 << 9) /* clear port power */ + +/* + * the POTPGT value is not defined in the ADMHC, so define a dummy value + */ +#define ADMHC_POTPGT 2 /* in ms */ + +/* hcd-private per-urb state */ +struct urb_priv { + struct ed *ed; + struct list_head pending; /* URBs on the same ED */ + + u32 td_cnt; /* # tds in this request */ + u32 td_idx; /* index of the current td */ + struct td *td[0]; /* all TDs in this request */ +}; + +#define TD_HASH_SIZE 64 /* power'o'two */ +/* sizeof (struct td) ~= 64 == 2^6 ... */ +#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE) + +/* + * This is the full ADMHCD controller description + * + * Note how the "proper" USB information is just + * a subset of what the full implementation needs. (Linus) + */ + +struct admhcd { + spinlock_t lock; + + /* + * I/O memory used to communicate with the HC (dma-consistent) + */ + struct admhcd_regs __iomem *regs; + + /* + * hcd adds to schedule for a live hc any time, but removals finish + * only at the start of the next frame. + */ + + struct ed *ed_head; + struct ed *ed_tails[4]; + + struct ed *ed_rm_list; /* to be removed */ + + struct ed *periodic[NUM_INTS]; /* shadow int_table */ + +#if 0 /* TODO: remove? */ + /* + * OTG controllers and transceivers need software interaction; + * other external transceivers should be software-transparent + */ + struct otg_transceiver *transceiver; + void (*start_hnp)(struct admhcd *ahcd); +#endif + + /* + * memory management for queue data structures + */ + struct dma_pool *td_cache; + struct dma_pool *ed_cache; + struct td *td_hash[TD_HASH_SIZE]; + struct list_head pending; + + /* + * driver state + */ + int num_ports; + int load[NUM_INTS]; + u32 host_control; /* copy of the host_control reg */ + unsigned long next_statechange; /* suspend/resume */ + u32 fminterval; /* saved register */ + unsigned autostop:1; /* rh auto stopping/stopped */ + + unsigned long flags; /* for HC bugs */ +#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */ +#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */ +#define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */ +#define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */ +#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */ +#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/ + /* there are also chip quirks/bugs in init logic */ + +#ifdef DEBUG + struct dentry *debug_dir; + struct dentry *debug_async; + struct dentry *debug_periodic; + struct dentry *debug_registers; +#endif +}; + +/* convert between an hcd pointer and the corresponding ahcd_hcd */ +static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd) +{ + return (struct admhcd *)(hcd->hcd_priv); +} +static inline struct usb_hcd *admhcd_to_hcd(const struct admhcd *ahcd) +{ + return container_of((void *)ahcd, struct usb_hcd, hcd_priv); +} + +/*-------------------------------------------------------------------------*/ + +#ifndef DEBUG +#define STUB_DEBUG_FILES +#endif /* DEBUG */ + +#ifdef DEBUG +# define admhc_dbg(ahcd, fmt, args...) \ + printk(KERN_DEBUG "adm5120-hcd: " fmt, ## args) +#else +# define admhc_dbg(ahcd, fmt, args...) do { } while (0) +#endif + +#define admhc_err(ahcd, fmt, args...) \ + printk(KERN_ERR "adm5120-hcd: " fmt, ## args) +#define admhc_info(ahcd, fmt, args...) \ + printk(KERN_INFO "adm5120-hcd: " fmt, ## args) +#define admhc_warn(ahcd, fmt, args...) \ + printk(KERN_WARNING "adm5120-hcd: " fmt, ## args) + +#ifdef ADMHC_VERBOSE_DEBUG +# define admhc_vdbg admhc_dbg +#else +# define admhc_vdbg(ahcd, fmt, args...) do { } while (0) +#endif + +/*-------------------------------------------------------------------------*/ + +/* + * While most USB host controllers implement their registers and + * in-memory communication descriptors in little-endian format, + * a minority (notably the IBM STB04XXX and the Motorola MPC5200 + * processors) implement them in big endian format. + * + * In addition some more exotic implementations like the Toshiba + * Spider (aka SCC) cell southbridge are "mixed" endian, that is, + * they have a different endianness for registers vs. in-memory + * descriptors. + * + * This attempts to support either format at compile time without a + * runtime penalty, or both formats with the additional overhead + * of checking a flag bit. + * + * That leads to some tricky Kconfig rules howevber. There are + * different defaults based on some arch/ppc platforms, though + * the basic rules are: + * + * Controller type Kconfig options needed + * --------------- ---------------------- + * little endian CONFIG_USB_ADMHC_LITTLE_ENDIAN + * + * fully big endian CONFIG_USB_ADMHC_BIG_ENDIAN_DESC _and_ + * CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO + * + * mixed endian CONFIG_USB_ADMHC_LITTLE_ENDIAN _and_ + * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC} + * + * (If you have a mixed endian controller, you -must- also define + * CONFIG_USB_ADMHC_LITTLE_ENDIAN or things will not work when building + * both your mixed endian and a fully big endian controller support in + * the same kernel image). + */ + +#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_DESC +#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN +#define big_endian_desc(ahcd) (ahcd->flags & OHCI_QUIRK_BE_DESC) +#else +#define big_endian_desc(ahcd) 1 /* only big endian */ +#endif +#else +#define big_endian_desc(ahcd) 0 /* only little endian */ +#endif + +#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO +#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN +#define big_endian_mmio(ahcd) (ahcd->flags & OHCI_QUIRK_BE_MMIO) +#else +#define big_endian_mmio(ahcd) 1 /* only big endian */ +#endif +#else +#define big_endian_mmio(ahcd) 0 /* only little endian */ +#endif + +/* + * Big-endian read/write functions are arch-specific. + * Other arches can be added if/when they're needed. + * + */ +static inline unsigned int admhc_readl(const struct admhcd *ahcd, + __hc32 __iomem *regs) +{ +#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO + return big_endian_mmio(ahcd) ? + readl_be(regs) : + readl(regs); +#else + return readl(regs); +#endif +} + +static inline void admhc_writel(const struct admhcd *ahcd, + const unsigned int val, __hc32 __iomem *regs) +{ +#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO + big_endian_mmio(ahcd) ? + writel_be(val, regs) : + writel(val, regs); +#else + writel(val, regs); +#endif +} + +static inline void admhc_writel_flush(const struct admhcd *ahcd) +{ +#if 0 + /* TODO: remove? */ + (void) admhc_readl(ahcd, &ahcd->regs->gencontrol); +#endif +} + + +/*-------------------------------------------------------------------------*/ + +/* cpu to ahcd */ +static inline __hc16 cpu_to_hc16(const struct admhcd *ahcd, const u16 x) +{ + return big_endian_desc(ahcd) ? + (__force __hc16)cpu_to_be16(x) : + (__force __hc16)cpu_to_le16(x); +} + +static inline __hc16 cpu_to_hc16p(const struct admhcd *ahcd, const u16 *x) +{ + return big_endian_desc(ahcd) ? + cpu_to_be16p(x) : + cpu_to_le16p(x); +} + +static inline __hc32 cpu_to_hc32(const struct admhcd *ahcd, const u32 x) +{ + return big_endian_desc(ahcd) ? + (__force __hc32)cpu_to_be32(x) : + (__force __hc32)cpu_to_le32(x); +} + +static inline __hc32 cpu_to_hc32p(const struct admhcd *ahcd, const u32 *x) +{ + return big_endian_desc(ahcd) ? + cpu_to_be32p(x) : + cpu_to_le32p(x); +} + +/* ahcd to cpu */ +static inline u16 hc16_to_cpu(const struct admhcd *ahcd, const __hc16 x) +{ + return big_endian_desc(ahcd) ? + be16_to_cpu((__force __be16)x) : + le16_to_cpu((__force __le16)x); +} + +static inline u16 hc16_to_cpup(const struct admhcd *ahcd, const __hc16 *x) +{ + return big_endian_desc(ahcd) ? + be16_to_cpup((__force __be16 *)x) : + le16_to_cpup((__force __le16 *)x); +} + +static inline u32 hc32_to_cpu(const struct admhcd *ahcd, const __hc32 x) +{ + return big_endian_desc(ahcd) ? + be32_to_cpu((__force __be32)x) : + le32_to_cpu((__force __le32)x); +} + +static inline u32 hc32_to_cpup(const struct admhcd *ahcd, const __hc32 *x) +{ + return big_endian_desc(ahcd) ? + be32_to_cpup((__force __be32 *)x) : + le32_to_cpup((__force __le32 *)x); +} + +/*-------------------------------------------------------------------------*/ + +static inline u16 admhc_frame_no(const struct admhcd *ahcd) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->fmnumber) & ADMHC_SFN_FN_MASK; + return (u16)t; +} + +static inline u16 admhc_frame_remain(const struct admhcd *ahcd) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->fmnumber) >> ADMHC_SFN_FR_SHIFT; + t &= ADMHC_SFN_FR_MASK; + return (u16)t; +} + +/*-------------------------------------------------------------------------*/ + +static inline void admhc_disable(struct admhcd *ahcd) +{ + admhcd_to_hcd(ahcd)->state = HC_STATE_HALT; +} + +#define FI 0x2edf /* 12000 bits per frame (-1) */ +#define FSLDP(fi) (0x7fff & ((6 * ((fi) - 1200)) / 7)) +#define FIT ADMHC_SFI_FIT +#define LSTHRESH 0x628 /* lowspeed bit threshold */ + +static inline void periodic_reinit(struct admhcd *ahcd) +{ +#if 0 + u32 fi = ahcd->fminterval & ADMHC_SFI_FI_MASK; + u32 fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT; + + /* TODO: adjust FSLargestDataPacket value too? */ + admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval, + &ahcd->regs->fminterval); +#else + u32 fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT; + + /* TODO: adjust FSLargestDataPacket value too? */ + admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval, + &ahcd->regs->fminterval); +#endif +} + +static inline u32 admhc_read_rhdesc(struct admhcd *ahcd) +{ + return admhc_readl(ahcd, &ahcd->regs->rhdesc); +} + +static inline u32 admhc_read_portstatus(struct admhcd *ahcd, int port) +{ + return admhc_readl(ahcd, &ahcd->regs->portstatus[port]); +} + +static inline void admhc_write_portstatus(struct admhcd *ahcd, int port, + u32 value) +{ + admhc_writel(ahcd, value, &ahcd->regs->portstatus[port]); +} + +static inline void roothub_write_status(struct admhcd *ahcd, u32 value) +{ + /* FIXME: read-only bits must be masked out */ + admhc_writel(ahcd, value, &ahcd->regs->rhdesc); +} + +static inline void admhc_intr_disable(struct admhcd *ahcd, u32 ints) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->int_enable); + t &= ~(ints); + admhc_writel(ahcd, t, &ahcd->regs->int_enable); + /* TODO: flush writes ?*/ +} + +static inline void admhc_intr_enable(struct admhcd *ahcd, u32 ints) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->int_enable); + t |= ints; + admhc_writel(ahcd, t, &ahcd->regs->int_enable); + /* TODO: flush writes ?*/ +} + +static inline void admhc_intr_ack(struct admhcd *ahcd, u32 ints) +{ + admhc_writel(ahcd, ints, &ahcd->regs->int_status); +} + +static inline void admhc_dma_enable(struct admhcd *ahcd) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->host_control); + if (t & ADMHC_HC_DMAE) + return; + + t |= ADMHC_HC_DMAE; + admhc_writel(ahcd, t, &ahcd->regs->host_control); + admhc_vdbg(ahcd, "DMA enabled\n"); +} + +static inline void admhc_dma_disable(struct admhcd *ahcd) +{ + u32 t; + + t = admhc_readl(ahcd, &ahcd->regs->host_control); + if (!(t & ADMHC_HC_DMAE)) + return; + + t &= ~ADMHC_HC_DMAE; + admhc_writel(ahcd, t, &ahcd->regs->host_control); + admhc_vdbg(ahcd, "DMA disabled\n"); +} diff --git a/target/linux/adm5120/files-3.18/drivers/watchdog/adm5120_wdt.c b/target/linux/adm5120/files-3.18/drivers/watchdog/adm5120_wdt.c new file mode 100644 index 0000000000..d5d63b27a5 --- /dev/null +++ b/target/linux/adm5120/files-3.18/drivers/watchdog/adm5120_wdt.c @@ -0,0 +1,202 @@ +/* + * ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver + * Copyright (c) Ondrej Zajicek , 2007 + * + * based on + * + * RC32434_WDT 0.01: IDT Interprise 79RC32434 watchdog driver + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#define DEFAULT_TIMEOUT 15 /* (secs) Default is 15 seconds */ +#define MAX_TIMEOUT 327 +/* Max is 327 seconds, counter is 15-bit integer, step is 10 ms */ + +#define NAME "adm5120_wdt" +#define VERSION "0.1" + +static int expect_close; +static int access; +static unsigned int timeout = DEFAULT_TIMEOUT; + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_LICENSE("GPL"); + + +static inline void wdt_set_timeout(void) +{ + u32 val = (1 << 31) | (((timeout * 100) & 0x7FFF) << 16); + SW_WRITE_REG(SWITCH_REG_WDOG0, val); +} + +/* + It looks like WDOG0-register-write don't modify counter, + but WDOG0-register-read resets counter. +*/ + +static inline void wdt_reset_counter(void) +{ + SW_READ_REG(SWITCH_REG_WDOG0); +} + +static inline void wdt_disable(void) +{ + SW_WRITE_REG(SWITCH_REG_WDOG0, 0x7FFF0000); +} + + + +static int wdt_open(struct inode *inode, struct file *file) +{ + /* Allow only one person to hold it open */ + if (access) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Activate timer */ + wdt_reset_counter(); + wdt_set_timeout(); + printk(KERN_INFO NAME ": enabling watchdog timer\n"); + access = 1; + return 0; +} + +static int wdt_release(struct inode *inode, struct file *file) +{ + /* + * Shut off the timer. + * Lock it in if it's a module and we set nowayout + */ + if (expect_close && (nowayout == 0)) { + wdt_disable(); + printk(KERN_INFO NAME ": disabling watchdog timer\n"); + module_put(THIS_MODULE); + } else + printk(KERN_CRIT NAME ": device closed unexpectedly. WDT will not stop!\n"); + + access = 0; + return 0; +} + +static ssize_t wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +{ + /* Refresh the timer. */ + if (len) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 1; + } + } + wdt_reset_counter(); + return len; + } + return 0; +} + +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + int new_timeout; + static struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "ADM5120_WDT Watchdog", + }; + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + if (copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, (int *)arg); + case WDIOC_KEEPALIVE: + wdt_reset_counter(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, (int *)arg)) + return -EFAULT; + if (new_timeout < 1) + return -EINVAL; + if (new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + wdt_set_timeout(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, (int *)arg); + } +} + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdt_write, + .unlocked_ioctl = wdt_ioctl, + .open = wdt_open, + .release = wdt_release, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +static char banner[] __initdata = KERN_INFO NAME ": Watchdog Timer version " VERSION "\n"; + +static int __init watchdog_init(void) +{ + int ret; + + ret = misc_register(&wdt_miscdev); + + if (ret) + return ret; + + wdt_disable(); + printk(banner); + + return 0; +} + +static void __exit watchdog_exit(void) +{ + misc_deregister(&wdt_miscdev); +} + +module_init(watchdog_init); +module_exit(watchdog_exit); diff --git a/target/linux/adm5120/patches-3.18/001-adm5120.patch b/target/linux/adm5120/patches-3.18/001-adm5120.patch new file mode 100644 index 0000000000..3e0e3ff8aa --- /dev/null +++ b/target/linux/adm5120/patches-3.18/001-adm5120.patch @@ -0,0 +1,44 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -60,6 +60,24 @@ choice + prompt "System type" + default SGI_IP22 + ++config ADM5120 ++ bool "Infineon/ADMtek ADM5120 SoC based machines" ++ select BOOT_RAW ++ select NO_EXCEPT_FILL ++ select CEVT_R4K ++ select CSRC_R4K ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_EARLY_PRINTK ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select ARCH_REQUIRE_GPIOLIB ++ select SWAP_IO_SPACE if CPU_BIG_ENDIAN ++ select MIPS_MACHINE ++ select HAVE_CLK ++ + config MIPS_ALCHEMY + bool "Alchemy processor based machines" + select 64BIT_PHYS_ADDR +@@ -834,6 +852,7 @@ config MIPS_PARAVIRT + + endchoice + ++source "arch/mips/adm5120/Kconfig" + source "arch/mips/alchemy/Kconfig" + source "arch/mips/ath79/Kconfig" + source "arch/mips/bcm47xx/Kconfig" +--- a/arch/mips/Kbuild.platforms ++++ b/arch/mips/Kbuild.platforms +@@ -1,5 +1,6 @@ + # All platforms listed in alphabetic order + ++platforms += adm5120 + platforms += alchemy + platforms += ar7 + platforms += ath79 diff --git a/target/linux/adm5120/patches-3.18/002-adm5120_flash.patch b/target/linux/adm5120/patches-3.18/002-adm5120_flash.patch new file mode 100644 index 0000000000..8936af13e2 --- /dev/null +++ b/target/linux/adm5120/patches-3.18/002-adm5120_flash.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/maps/Kconfig ++++ b/drivers/mtd/maps/Kconfig +@@ -399,4 +399,8 @@ config MTD_LATCH_ADDR + + If compiled as a module, it will be called latch-addr-flash. + ++config MTD_ADM5120 ++ tristate "Map driver for ADM5120 based boards" ++ depends on ADM5120 ++ + endmenu +--- a/drivers/mtd/maps/Makefile ++++ b/drivers/mtd/maps/Makefile +@@ -30,6 +30,7 @@ obj-$(CONFIG_MTD_SUN_UFLASH) += sun_ufla + obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o + obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o + obj-$(CONFIG_MTD_PCI) += pci.o ++obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o + obj-$(CONFIG_MTD_IMPA7) += impa7.o + obj-$(CONFIG_MTD_UCLINUX) += uclinux.o + obj-$(CONFIG_MTD_NETtel) += nettel.o diff --git a/target/linux/adm5120/patches-3.18/003-adm5120_switch.patch b/target/linux/adm5120/patches-3.18/003-adm5120_switch.patch new file mode 100644 index 0000000000..416488c0e0 --- /dev/null +++ b/target/linux/adm5120/patches-3.18/003-adm5120_switch.patch @@ -0,0 +1,23 @@ +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -263,6 +263,10 @@ source "drivers/net/dsa/Kconfig" + + source "drivers/net/ethernet/Kconfig" + ++config ADM5120_ENET ++ tristate "ADM5120 Ethernet switch support" ++ depends on ADM5120 ++ + source "drivers/net/fddi/Kconfig" + + source "drivers/net/hippi/Kconfig" +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -34,6 +34,7 @@ obj-$(CONFIG_CAN) += can/ + obj-$(CONFIG_ETRAX_ETHERNET) += cris/ + obj-$(CONFIG_NET_DSA) += dsa/ + obj-$(CONFIG_ETHERNET) += ethernet/ ++obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o + obj-$(CONFIG_FDDI) += fddi/ + obj-$(CONFIG_HIPPI) += hippi/ + obj-$(CONFIG_HAMRADIO) += hamradio/ diff --git a/target/linux/adm5120/patches-3.18/005-adm5120_usb.patch b/target/linux/adm5120/patches-3.18/005-adm5120_usb.patch new file mode 100644 index 0000000000..139e223c00 --- /dev/null +++ b/target/linux/adm5120/patches-3.18/005-adm5120_usb.patch @@ -0,0 +1,33 @@ +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_DWC2) += dwc2/ + obj-$(CONFIG_USB_MON) += mon/ + + obj-$(CONFIG_PCI) += host/ ++obj-$(CONFIG_USB_ADM5120_HCD) += host/ + obj-$(CONFIG_USB_EHCI_HCD) += host/ + obj-$(CONFIG_USB_ISP116X_HCD) += host/ + obj-$(CONFIG_USB_OHCI_HCD) += host/ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -3,6 +3,10 @@ + # + comment "USB Host Controller Drivers" + ++config USB_ADM5120_HCD ++ tristate "ADM5120 HCD support (EXPERIMENTAL)" ++ depends on USB && ADM5120 && EXPERIMENTAL ++ + config USB_C67X00_HCD + tristate "Cypress C67x00 HCD support" + help +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -31,6 +31,7 @@ obj-$(CONFIG_PCI) += pci-quirks.o + obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o + obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o + ++obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o + obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o + obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o diff --git a/target/linux/adm5120/patches-3.18/007-adm5120_pci.patch b/target/linux/adm5120/patches-3.18/007-adm5120_pci.patch new file mode 100644 index 0000000000..a5a0abf43b --- /dev/null +++ b/target/linux/adm5120/patches-3.18/007-adm5120_pci.patch @@ -0,0 +1,22 @@ +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o + obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o + obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ + ops-bcm63xx.o ++obj-$(CONFIG_ADM5120) += pci-adm5120.o + obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o + obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o + obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h +@@ -1820,6 +1820,9 @@ + + #define PCI_VENDOR_ID_CB 0x1307 /* Measurement Computing */ + ++#define PCI_VENDOR_ID_ADMTEK 0x1317 ++#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120 ++ + #define PCI_VENDOR_ID_SIIG 0x131f + #define PCI_SUBVENDOR_ID_SIIG 0x131f + #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 diff --git a/target/linux/adm5120/patches-3.18/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-3.18/009-adm5120_leds_switch_trigger.patch new file mode 100644 index 0000000000..627afc1cf8 --- /dev/null +++ b/target/linux/adm5120/patches-3.18/009-adm5120_leds_switch_trigger.patch @@ -0,0 +1,22 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -508,4 +508,12 @@ config LEDS_VERSATILE + comment "LED Triggers" + source "drivers/leds/trigger/Kconfig" + ++config LEDS_TRIGGER_ADM5120_SWITCH ++ tristate "LED ADM5120 Switch Port Status Trigger" ++ depends on LEDS_TRIGGERS && ADM5120 ++ help ++ This allows LEDs to be controlled by the port states of ++ the ADM5120 built-in Ethernet Switch ++ If unsure, say N. ++ + endif # NEW_LEDS +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -65,3 +65,4 @@ obj-$(CONFIG_LEDS_TRIGGERS) += trigger/ + obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o + obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o ++obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o diff --git a/target/linux/adm5120/patches-3.18/050-revert_rootfs_splits.patch b/target/linux/adm5120/patches-3.18/050-revert_rootfs_splits.patch new file mode 100644 index 0000000000..8b1191a022 --- /dev/null +++ b/target/linux/adm5120/patches-3.18/050-revert_rootfs_splits.patch @@ -0,0 +1,354 @@ +--- a/drivers/mtd/mtdpart.c ++++ b/drivers/mtd/mtdpart.c +@@ -29,11 +29,9 @@ + #include + #include + #include +-#include + #include + + #include "mtdcore.h" +-#include "mtdsplit/mtdsplit.h" + + #define MTD_ERASE_PARTIAL 0x8000 /* partition only covers parts of an erase block */ + +@@ -49,14 +47,13 @@ struct mtd_part { + struct list_head list; + }; + +-static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part); +- + /* + * Given a pointer to the MTD object in the mtd_part structure, we can retrieve + * the pointer to that structure with this macro. + */ + #define PART(x) ((struct mtd_part *)(x)) + ++ + /* + * MTD methods which simply translate the effective address and pass through + * to the _real_ device. +@@ -520,12 +517,14 @@ static struct mtd_part *allocate_partiti + if (slave->offset == MTDPART_OFS_APPEND) + slave->offset = cur_offset; + if (slave->offset == MTDPART_OFS_NXTBLK) { +- /* Round up to next erasesize */ +- slave->offset = mtd_roundup_to_eb(cur_offset, master); +- if (slave->offset != cur_offset) ++ slave->offset = cur_offset; ++ if (mtd_mod_by_eb(cur_offset, master) != 0) { ++ /* Round up to next erasesize */ ++ slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize; + printk(KERN_NOTICE "Moving partition %d: " + "0x%012llx -> 0x%012llx\n", partno, + (unsigned long long)cur_offset, (unsigned long long)slave->offset); ++ } + } + if (slave->offset == MTDPART_OFS_RETAIN) { + slave->offset = cur_offset; +@@ -629,10 +628,8 @@ out_register: + return slave; + } + +- +-static int +-__mtd_add_partition(struct mtd_info *master, const char *name, +- long long offset, long long length, bool dup_check) ++int mtd_add_partition(struct mtd_info *master, const char *name, ++ long long offset, long long length) + { + struct mtd_partition part; + struct mtd_part *p, *new; +@@ -664,24 +661,21 @@ __mtd_add_partition(struct mtd_info *mas + end = offset + length; + + mutex_lock(&mtd_partitions_mutex); +- if (dup_check) { +- list_for_each_entry(p, &mtd_partitions, list) +- if (p->master == master) { +- if ((start >= p->offset) && +- (start < (p->offset + p->mtd.size))) +- goto err_inv; +- +- if ((end >= p->offset) && +- (end < (p->offset + p->mtd.size))) +- goto err_inv; +- } +- } ++ list_for_each_entry(p, &mtd_partitions, list) ++ if (p->master == master) { ++ if ((start >= p->offset) && ++ (start < (p->offset + p->mtd.size))) ++ goto err_inv; ++ ++ if ((end >= p->offset) && ++ (end < (p->offset + p->mtd.size))) ++ goto err_inv; ++ } + + list_add(&new->list, &mtd_partitions); + mutex_unlock(&mtd_partitions_mutex); + + add_mtd_device(&new->mtd); +- mtd_partition_split(master, new); + + return ret; + err_inv: +@@ -691,12 +685,6 @@ err_inv: + } + EXPORT_SYMBOL_GPL(mtd_add_partition); + +-int mtd_add_partition(struct mtd_info *master, const char *name, +- long long offset, long long length) +-{ +- return __mtd_add_partition(master, name, offset, length, true); +-} +- + int mtd_del_partition(struct mtd_info *master, int partno) + { + struct mtd_part *slave, *next; +@@ -720,166 +708,6 @@ int mtd_del_partition(struct mtd_info *m + } + EXPORT_SYMBOL_GPL(mtd_del_partition); + +-static int +-run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type) +-{ +- struct mtd_partition *parts; +- int nr_parts; +- int i; +- +- nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, &parts, +- NULL); +- if (nr_parts <= 0) +- return nr_parts; +- +- if (WARN_ON(!parts)) +- return 0; +- +- for (i = 0; i < nr_parts; i++) { +- /* adjust partition offsets */ +- parts[i].offset += slave->offset; +- +- __mtd_add_partition(slave->master, +- parts[i].name, +- parts[i].offset, +- parts[i].size, +- false); +- } +- +- kfree(parts); +- +- return nr_parts; +-} +- +-static inline unsigned long +-mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len) +-{ +- unsigned long mask = mtd->erasesize - 1; +- +- len += offset & mask; +- len = (len + mask) & ~mask; +- len -= offset & mask; +- return len; +-} +- +-static int split_squashfs(struct mtd_info *master, int offset, int *split_offset) +-{ +- size_t squashfs_len; +- int len, ret; +- +- ret = mtd_get_squashfs_len(master, offset, &squashfs_len); +- if (ret) +- return ret; +- +- len = mtd_pad_erasesize(master, offset, squashfs_len); +- *split_offset = offset + len; +- +- return 0; +-} +- +-static void split_rootfs_data(struct mtd_info *master, struct mtd_part *part) +-{ +- unsigned int split_offset = 0; +- unsigned int split_size; +- int ret; +- +- ret = split_squashfs(master, part->offset, &split_offset); +- if (ret) +- return; +- +- if (split_offset <= 0) +- return; +- +- if (config_enabled(CONFIG_MTD_SPLIT_SQUASHFS_ROOT)) +- pr_err("Dedicated partitioner didn't create \"rootfs_data\" partition, please fill a bug report!\n"); +- else +- pr_warn("Support for built-in \"rootfs_data\" splitter will be removed, please use CONFIG_MTD_SPLIT_SQUASHFS_ROOT\n"); +- +- split_size = part->mtd.size - (split_offset - part->offset); +- printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=0x%x, len=0x%x\n", +- ROOTFS_SPLIT_NAME, split_offset, split_size); +- +- __mtd_add_partition(master, ROOTFS_SPLIT_NAME, split_offset, +- split_size, false); +-} +- +-#define UBOOT_MAGIC 0x27051956 +- +-static void split_uimage(struct mtd_info *master, struct mtd_part *part) +-{ +- struct { +- __be32 magic; +- __be32 pad[2]; +- __be32 size; +- } hdr; +- size_t len; +- +- if (mtd_read(master, part->offset, sizeof(hdr), &len, (void *) &hdr)) +- return; +- +- if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC)) +- return; +- +- len = be32_to_cpu(hdr.size) + 0x40; +- len = mtd_pad_erasesize(master, part->offset, len); +- if (len + master->erasesize > part->mtd.size) +- return; +- +- if (config_enabled(CONFIG_MTD_SPLIT_UIMAGE_FW)) +- pr_err("Dedicated partitioner didn't split firmware partition, please fill a bug report!\n"); +- else +- pr_warn("Support for built-in firmware splitter will be removed, please use CONFIG_MTD_SPLIT_UIMAGE_FW\n"); +- +- __mtd_add_partition(master, "rootfs", part->offset + len, +- part->mtd.size - len, false); +-} +- +-#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME +-#define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME +-#else +-#define SPLIT_FIRMWARE_NAME "unused" +-#endif +- +-static void split_firmware(struct mtd_info *master, struct mtd_part *part) +-{ +- int ret; +- +- ret = run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE); +- if (ret > 0) +- return; +- +- if (config_enabled(CONFIG_MTD_UIMAGE_SPLIT)) +- split_uimage(master, part); +-} +- +-void __weak arch_split_mtd_part(struct mtd_info *master, const char *name, +- int offset, int size) +-{ +-} +- +-static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part) +-{ +- static int rootfs_found = 0; +- +- if (rootfs_found) +- return; +- +- if (!strcmp(part->mtd.name, "rootfs")) { +- int num = run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS); +- +- if (num <= 0 && config_enabled(CONFIG_MTD_ROOTFS_SPLIT)) +- split_rootfs_data(master, part); +- +- rootfs_found = 1; +- } +- +- if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) && +- config_enabled(CONFIG_MTD_SPLIT_FIRMWARE)) +- split_firmware(master, part); +- +- arch_split_mtd_part(master, part->mtd.name, part->offset, +- part->mtd.size); +-} + /* + * This function, given a master MTD object and a partition table, creates + * and registers slave MTD objects which are bound to the master according to +@@ -909,7 +737,6 @@ int add_mtd_partitions(struct mtd_info * + mutex_unlock(&mtd_partitions_mutex); + + add_mtd_device(&slave->mtd); +- mtd_partition_split(master, slave); + + cur_offset = slave->offset + slave->mtd.size; + } +@@ -939,30 +766,6 @@ static struct mtd_part_parser *get_parti + + #define put_partition_parser(p) do { module_put((p)->owner); } while (0) + +-static struct mtd_part_parser * +-get_partition_parser_by_type(enum mtd_parser_type type, +- struct mtd_part_parser *start) +-{ +- struct mtd_part_parser *p, *ret = NULL; +- +- spin_lock(&part_parser_lock); +- +- p = list_prepare_entry(start, &part_parsers, list); +- if (start) +- put_partition_parser(start); +- +- list_for_each_entry_continue(p, &part_parsers, list) { +- if (p->type == type && try_module_get(p->owner)) { +- ret = p; +- break; +- } +- } +- +- spin_unlock(&part_parser_lock); +- +- return ret; +-} +- + void register_mtd_parser(struct mtd_part_parser *p) + { + spin_lock(&part_parser_lock); +@@ -1036,38 +839,6 @@ int parse_mtd_partitions(struct mtd_info + return ret; + } + +-int parse_mtd_partitions_by_type(struct mtd_info *master, +- enum mtd_parser_type type, +- struct mtd_partition **pparts, +- struct mtd_part_parser_data *data) +-{ +- struct mtd_part_parser *prev = NULL; +- int ret = 0; +- +- while (1) { +- struct mtd_part_parser *parser; +- +- parser = get_partition_parser_by_type(type, prev); +- if (!parser) +- break; +- +- ret = (*parser->parse_fn)(master, pparts, data); +- +- if (ret > 0) { +- put_partition_parser(parser); +- printk(KERN_NOTICE +- "%d %s partitions found on MTD device %s\n", +- ret, parser->name, master->name); +- break; +- } +- +- prev = parser; +- } +- +- return ret; +-} +-EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type); +- + int mtd_is_partition(const struct mtd_info *mtd) + { + struct mtd_part *part; diff --git a/target/linux/adm5120/patches-3.18/100-rootfs_split.patch b/target/linux/adm5120/patches-3.18/100-rootfs_split.patch new file mode 100644 index 0000000000..22241e4fdf --- /dev/null +++ b/target/linux/adm5120/patches-3.18/100-rootfs_split.patch @@ -0,0 +1,316 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -52,6 +52,14 @@ config MTD_TESTS + WARNING: some of the tests will ERASE entire MTD device which they + test. Do not use these tests unless you really know what you do. + ++config MTD_ROOTFS_ROOT_DEV ++ bool "Automatically set 'rootfs' partition to be root filesystem" ++ default y ++ ++config MTD_ROOTFS_SPLIT ++ bool "Automatically split 'rootfs' partition for squashfs" ++ default y ++ + config MTD_REDBOOT_PARTS + tristate "RedBoot partition table parsing" + ---help--- +--- a/drivers/mtd/mtdpart.c ++++ b/drivers/mtd/mtdpart.c +@@ -29,6 +29,8 @@ + #include + #include + #include ++#include ++#include + #include + + #include "mtdcore.h" +@@ -52,7 +54,7 @@ struct mtd_part { + * the pointer to that structure with this macro. + */ + #define PART(x) ((struct mtd_part *)(x)) +- ++#define IS_PART(mtd) (mtd->_read == part_read) + + /* + * MTD methods which simply translate the effective address and pass through +@@ -708,6 +710,144 @@ int mtd_del_partition(struct mtd_info *m + } + EXPORT_SYMBOL_GPL(mtd_del_partition); + ++#ifdef CONFIG_MTD_ROOTFS_SPLIT ++#define ROOTFS_SPLIT_NAME "rootfs_data" ++#define ROOTFS_REMOVED_NAME "" ++ ++struct squashfs_super_block { ++ __le32 s_magic; ++ __le32 pad0[9]; ++ __le64 bytes_used; ++}; ++ ++ ++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset) ++{ ++ struct squashfs_super_block sb; ++ int len, ret; ++ ++ ret = mtd_read(master, offset, sizeof(sb), &len, (void *) &sb); ++ if (ret || (len != sizeof(sb))) { ++ printk(KERN_ALERT "split_squashfs: error occured while reading " ++ "from \"%s\"\n", master->name); ++ return -EINVAL; ++ } ++ ++ if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) { ++ printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n", ++ master->name); ++ *split_offset = 0; ++ return 0; ++ } ++ ++ if (le64_to_cpu((sb.bytes_used)) <= 0) { ++ printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n", ++ master->name); ++ *split_offset = 0; ++ return 0; ++ } ++ ++ len = (u32) le64_to_cpu(sb.bytes_used); ++ len += (offset & 0x000fffff); ++ len += (master->erasesize - 1); ++ len &= ~(master->erasesize - 1); ++ len -= (offset & 0x000fffff); ++ *split_offset = offset + len; ++ ++ return 0; ++} ++ ++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part) ++{ ++ struct mtd_partition dpart; ++ struct mtd_part *slave = NULL; ++ struct mtd_part *spart; ++ int ret, split_offset = 0; ++ ++ spart = PART(rpart); ++ ret = split_squashfs(master, spart->offset, &split_offset); ++ if (ret) ++ return ret; ++ ++ if (split_offset <= 0) ++ return 0; ++ ++ memcpy(&dpart, part, sizeof(dpart)); ++ dpart.name = ROOTFS_SPLIT_NAME; ++ ++ dpart.size = rpart->size - (split_offset - spart->offset); ++ dpart.offset = split_offset; ++ ++ printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n", ++ ROOTFS_SPLIT_NAME, dpart.offset, dpart.size); ++ ++ slave = allocate_partition(master, &dpart, 0, split_offset); ++ if (IS_ERR(slave)) ++ return PTR_ERR(slave); ++ mutex_lock(&mtd_partitions_mutex); ++ list_add(&slave->list, &mtd_partitions); ++ mutex_unlock(&mtd_partitions_mutex); ++ ++ add_mtd_device(&slave->mtd); ++ ++ rpart->split = &slave->mtd; ++ ++ return 0; ++} ++ ++static int refresh_rootfs_split(struct mtd_info *mtd) ++{ ++ struct mtd_partition tpart; ++ struct mtd_part *part; ++ char *name; ++ //int index = 0; ++ int offset, size; ++ int ret; ++ ++ part = PART(mtd); ++ ++ /* check for the new squashfs offset first */ ++ ret = split_squashfs(part->master, part->offset, &offset); ++ if (ret) ++ return ret; ++ ++ if ((offset > 0) && !mtd->split) { ++ printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name); ++ /* if we don't have a rootfs split partition, create a new one */ ++ tpart.name = (char *) mtd->name; ++ tpart.size = mtd->size; ++ tpart.offset = part->offset; ++ ++ return split_rootfs_data(part->master, &part->mtd, &tpart); ++ } else if ((offset > 0) && mtd->split) { ++ /* update the offsets of the existing partition */ ++ size = mtd->size + part->offset - offset; ++ ++ part = PART(mtd->split); ++ part->offset = offset; ++ part->mtd.size = size; ++ printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n", ++ __func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"), ++ (u32) part->offset, (u32) part->mtd.size); ++ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL); ++ strcpy(name, ROOTFS_SPLIT_NAME); ++ part->mtd.name = name; ++ } else if ((offset <= 0) && mtd->split) { ++ printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name); ++ ++ /* mark existing partition as removed */ ++ part = PART(mtd->split); ++ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL); ++ strcpy(name, ROOTFS_REMOVED_NAME); ++ part->mtd.name = name; ++ part->offset = 0; ++ part->mtd.size = 0; ++ } ++ ++ return 0; ++} ++#endif /* CONFIG_MTD_ROOTFS_SPLIT */ ++ + /* + * This function, given a master MTD object and a partition table, creates + * and registers slave MTD objects which are bound to the master according to +@@ -724,6 +864,9 @@ int add_mtd_partitions(struct mtd_info * + struct mtd_part *slave; + uint64_t cur_offset = 0; + int i; ++#ifdef CONFIG_MTD_ROOTFS_SPLIT ++ int ret; ++#endif + + printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name); + +@@ -738,12 +881,53 @@ int add_mtd_partitions(struct mtd_info * + + add_mtd_device(&slave->mtd); + ++ if (!strcmp(parts[i].name, "rootfs")) { ++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV ++ if (ROOT_DEV == 0) { ++ printk(KERN_NOTICE "mtd: partition \"rootfs\" " ++ "set to be root filesystem\n"); ++ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index); ++ } ++#endif ++#ifdef CONFIG_MTD_ROOTFS_SPLIT ++ ret = split_rootfs_data(master, &slave->mtd, &parts[i]); ++ /* if (ret == 0) ++ * j++; */ ++#endif ++ } ++ + cur_offset = slave->offset + slave->mtd.size; + } + + return 0; + } + ++int mtd_device_refresh(struct mtd_info *mtd) ++{ ++ int ret = 0; ++ ++ if (IS_PART(mtd)) { ++ struct mtd_part *part; ++ struct mtd_info *master; ++ ++ part = PART(mtd); ++ master = part->master; ++ if (master->refresh_device) ++ ret = master->refresh_device(master); ++ } ++ ++ if (!ret && mtd->refresh_device) ++ ret = mtd->refresh_device(mtd); ++ ++#ifdef CONFIG_MTD_ROOTFS_SPLIT ++ if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs")) ++ refresh_rootfs_split(mtd); ++#endif ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(mtd_device_refresh); ++ + static DEFINE_SPINLOCK(part_parser_lock); + static LIST_HEAD(part_parsers); + +--- a/drivers/mtd/mtdchar.c ++++ b/drivers/mtd/mtdchar.c +@@ -1008,6 +1008,12 @@ static int mtdchar_ioctl(struct file *fi + break; + } + ++ case MTDREFRESH: ++ { ++ ret = mtd_device_refresh(mtd); ++ break; ++ } ++ + default: + ret = -ENOTTY; + } +--- a/include/linux/mtd/mtd.h ++++ b/include/linux/mtd/mtd.h +@@ -115,6 +115,7 @@ struct nand_ecclayout { + + struct module; /* only needed for owner field in mtd_info */ + ++struct mtd_info; + struct mtd_info { + u_char type; + uint32_t flags; +@@ -231,6 +232,9 @@ struct mtd_info { + int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs); + int (*_suspend) (struct mtd_info *mtd); + void (*_resume) (struct mtd_info *mtd); ++ int (*refresh_device)(struct mtd_info *mtd); ++ struct mtd_info *split; ++ + /* + * If the driver is something smart, like UBI, it may need to maintain + * its own reference counting. The below functions are only for driver. +@@ -397,6 +401,7 @@ extern int mtd_device_parse_register(str + int defnr_parts); + #define mtd_device_register(master, parts, nr_parts) \ + mtd_device_parse_register(master, NULL, NULL, parts, nr_parts) ++extern int mtd_device_refresh(struct mtd_info *master); + extern int mtd_device_unregister(struct mtd_info *master); + extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); + extern int __get_mtd_device(struct mtd_info *mtd); +--- a/include/linux/mtd/partitions.h ++++ b/include/linux/mtd/partitions.h +@@ -37,12 +37,14 @@ + */ + struct mtd_info; + ++struct mtd_partition; + struct mtd_partition { + const char *name; /* identifier string */ + uint64_t size; /* partition size */ + uint64_t offset; /* offset within the master MTD space */ + uint32_t mask_flags; /* master MTD flags to mask out for this partition */ + struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */ ++ int (*refresh_partition)(struct mtd_info *); + }; + + #define MTDPART_OFS_RETAIN (-3) +--- a/include/uapi/mtd/mtd-abi.h ++++ b/include/uapi/mtd/mtd-abi.h +@@ -203,6 +203,7 @@ struct otp_info { + * without OOB, e.g., NOR flash. + */ + #define MEMWRITE _IOWR('M', 24, struct mtd_write_req) ++#define MTDREFRESH _IO('M', 50) + + /* + * Obsolete legacy interface. Keep it in order not to break userspace diff --git a/target/linux/adm5120/patches-3.18/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-3.18/101-cfi_fixup_macronix_bootloc.patch new file mode 100644 index 0000000000..a0caa680bc --- /dev/null +++ b/target/linux/adm5120/patches-3.18/101-cfi_fixup_macronix_bootloc.patch @@ -0,0 +1,84 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -49,6 +49,12 @@ + #define SST49LF008A 0x005a + #define AT49BV6416 0x00d6 + ++/* Macronix */ ++#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */ ++#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */ ++#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */ ++#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */ ++ + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +@@ -374,6 +380,41 @@ static struct cfi_fixup cfi_nopri_fixup_ + { 0, 0, NULL } + }; + ++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++/* ++ * Some Macronix chips has no/bad bootblock information in the CFI table ++ */ ++static void fixup_macronix_bootloc(struct mtd_info *mtd) ++{ ++ struct map_info *map = mtd->priv; ++ struct cfi_private *cfi = map->fldrv_priv; ++ struct cfi_pri_amdstd *extp = cfi->cmdset_priv; ++ __u8 t; ++ ++ switch (cfi->id) { ++ /* TODO: put affected chip ids here */ ++ case MX29LV160B: ++ case MX29LV320B: ++ t = 2; /* Bottom boot */ ++ break; ++ case MX29LV160T: ++ case MX29LV320T: ++ t = 3; /* Top boot */ ++ break; ++ default: ++ return; ++ } ++ ++ if (extp->TopBottom == t) ++ /* boot location detected by the CFI layer is correct */ ++ return; ++ ++ extp->TopBottom = t; ++ printk("%s: Macronix chip detected, id:0x%04X, boot location forced " ++ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top"); ++} ++#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */ ++ + static struct cfi_fixup cfi_fixup_table[] = { + { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri }, + #ifdef AMD_BOOTLOC_BUG +@@ -416,6 +457,9 @@ static struct cfi_fixup fixup_table[] = + */ + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip }, + { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock }, ++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++ { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc }, ++#endif + { 0, 0, NULL } + }; + +--- a/drivers/mtd/chips/Kconfig ++++ b/drivers/mtd/chips/Kconfig +@@ -188,6 +188,14 @@ config MTD_CFI_AMDSTD + provides support for command set 0002, used on chips including + the AMD Am29LV320. + ++config MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++ bool "Fix boot-block location for Macronix flash chips" ++ depends on MTD_CFI_AMDSTD ++ help ++ Some Macronix flash chips have no/wrong boot-block location in the ++ CFI table, and the driver may detect the type incorrectly. Select ++ this if your board has such chip. ++ + config MTD_CFI_STAA + tristate "Support for CFI command set 0020 (ST (Advanced Architecture) chips)" + depends on MTD_GEN_PROBE diff --git a/target/linux/adm5120/patches-3.18/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-3.18/102-jedec_pmc_39lvxxx_chips.patch new file mode 100644 index 0000000000..00148fa602 --- /dev/null +++ b/target/linux/adm5120/patches-3.18/102-jedec_pmc_39lvxxx_chips.patch @@ -0,0 +1,68 @@ +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c +@@ -115,6 +115,10 @@ + #define UPD29F064115 0x221C + + /* PMC */ ++#define PM39LV512 0x001B ++#define PM39LV010 0x001C ++#define PM39LV020 0x003D ++#define PM39LV040 0x003E + #define PM49FL002 0x006D + #define PM49FL004 0x006E + #define PM49FL008 0x006A +@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } ++ }, { ++ .mfr_id = CFI_MFR_PMC, ++ .dev_id = PM39LV512, ++ .name = "PMC Pm39LV512", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_64KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,16), ++ } ++ }, { ++ .mfr_id = CFI_MFR_PMC, ++ .dev_id = PM39LV010, ++ .name = "PMC Pm39LV010", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_128KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,32), ++ } ++ }, { ++ .mfr_id = CFI_MFR_PMC, ++ .dev_id = PM39LV020, ++ .name = "PMC Pm39LV020", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_256KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,64), ++ } ++ }, { ++ .mfr_id = CFI_MFR_PMC, ++ .dev_id = PM39LV040, ++ .name = "PMC Pm39LV040", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_512KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,128), ++ } + }, { + .mfr_id = CFI_MFR_PMC, + .dev_id = PM49FL002, diff --git a/target/linux/adm5120/patches-3.18/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-3.18/103-mtd_trxsplit.patch new file mode 100644 index 0000000000..62667769cd --- /dev/null +++ b/target/linux/adm5120/patches-3.18/103-mtd_trxsplit.patch @@ -0,0 +1,23 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -60,6 +60,10 @@ config MTD_ROOTFS_SPLIT + bool "Automatically split 'rootfs' partition for squashfs" + default y + ++config MTD_TRXSPLIT ++ bool "Automatically find and split TRX partitions" ++ default n ++ + config MTD_REDBOOT_PARTS + tristate "RedBoot partition table parsing" + ---help--- +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o + obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o ++obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o + + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o diff --git a/target/linux/adm5120/patches-3.18/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-3.18/120-rb153_cf_driver.patch new file mode 100644 index 0000000000..c5d4d3a57e --- /dev/null +++ b/target/linux/adm5120/patches-3.18/120-rb153_cf_driver.patch @@ -0,0 +1,28 @@ +--- a/drivers/ata/Makefile ++++ b/drivers/ata/Makefile +@@ -98,6 +98,7 @@ obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia + obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o + obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o + obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o ++obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o + obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o + obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o + obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@ -955,6 +955,15 @@ config PATA_QDI + help + Support for QDI 6500 and 6580 PATA controllers on VESA local bus. + ++config PATA_RB153_CF ++ tristate "RouterBOARD 153 Compact Flash support" ++ depends on ADM5120_MACH_RB_153 ++ help ++ This option enables support for a Compact Flash connected on ++ the RouterBOARD 153. ++ ++ If unsure, say N. ++ + config PATA_RB532 + tristate "RouterBoard 532 PATA CompactFlash support" + depends on MIKROTIK_RB532 diff --git a/target/linux/adm5120/patches-3.18/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-3.18/200-amba_pl010_hacks.patch new file mode 100644 index 0000000000..8eee7a10ff --- /dev/null +++ b/target/linux/adm5120/patches-3.18/200-amba_pl010_hacks.patch @@ -0,0 +1,354 @@ +--- a/drivers/tty/serial/amba-pl010.c ++++ b/drivers/tty/serial/amba-pl010.c +@@ -48,11 +48,9 @@ + #include + #include + +-#define UART_NR 8 +- + #define SERIAL_AMBA_MAJOR 204 + #define SERIAL_AMBA_MINOR 16 +-#define SERIAL_AMBA_NR UART_NR ++#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS + + #define AMBA_ISR_PASS_LIMIT 256 + +@@ -78,9 +76,9 @@ static void pl010_stop_tx(struct uart_po + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr &= ~UART010_CR_TIE; +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_start_tx(struct uart_port *port) +@@ -88,9 +86,9 @@ static void pl010_start_tx(struct uart_p + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr |= UART010_CR_TIE; +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_stop_rx(struct uart_port *port) +@@ -98,9 +96,9 @@ static void pl010_stop_rx(struct uart_po + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_enable_ms(struct uart_port *port) +@@ -108,18 +106,18 @@ static void pl010_enable_ms(struct uart_ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr |= UART010_CR_MSIE; +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_rx_chars(struct uart_amba_port *uap) + { + unsigned int status, ch, flag, rsr, max_count = 256; + +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + while (UART_RX_DATA(status) && max_count--) { +- ch = readb(uap->port.membase + UART01x_DR); ++ ch = __raw_readl(uap->port.membase + UART01x_DR); + flag = TTY_NORMAL; + + uap->port.icount.rx++; +@@ -128,9 +126,9 @@ static void pl010_rx_chars(struct uart_a + * Note that the error handling code is + * out of the main execution path + */ +- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; ++ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + if (unlikely(rsr & UART01x_RSR_ANY)) { +- writel(0, uap->port.membase + UART01x_ECR); ++ __raw_writel(0, uap->port.membase + UART01x_ECR); + + if (rsr & UART01x_RSR_BE) { + rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); +@@ -160,7 +158,7 @@ static void pl010_rx_chars(struct uart_a + uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + + ignore_char: +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + } + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(&uap->port.state->port); +@@ -173,7 +171,7 @@ static void pl010_tx_chars(struct uart_a + int count; + + if (uap->port.x_char) { +- writel(uap->port.x_char, uap->port.membase + UART01x_DR); ++ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; +@@ -185,7 +183,7 @@ static void pl010_tx_chars(struct uart_a + + count = uap->port.fifosize >> 1; + do { +- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); ++ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) +@@ -203,9 +201,9 @@ static void pl010_modem_status(struct ua + { + unsigned int status, delta; + +- writel(0, uap->port.membase + UART010_ICR); ++ __raw_writel(0, uap->port.membase + UART010_ICR); + +- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; ++ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; +@@ -233,7 +231,7 @@ static irqreturn_t pl010_int(int irq, vo + + spin_lock(&uap->port.lock); + +- status = readb(uap->port.membase + UART010_IIR); ++ status = __raw_readl(uap->port.membase + UART010_IIR); + if (status) { + do { + if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) +@@ -246,7 +244,7 @@ static irqreturn_t pl010_int(int irq, vo + if (pass_counter-- == 0) + break; + +- status = readb(uap->port.membase + UART010_IIR); ++ status = __raw_readl(uap->port.membase + UART010_IIR); + } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | + UART010_IIR_TIS)); + handled = 1; +@@ -260,7 +258,7 @@ static irqreturn_t pl010_int(int irq, vo + static unsigned int pl010_tx_empty(struct uart_port *port) + { + struct uart_amba_port *uap = (struct uart_amba_port *)port; +- unsigned int status = readb(uap->port.membase + UART01x_FR); ++ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR); + return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; + } + +@@ -270,7 +268,7 @@ static unsigned int pl010_get_mctrl(stru + unsigned int result = 0; + unsigned int status; + +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + if (status & UART01x_FR_DCD) + result |= TIOCM_CAR; + if (status & UART01x_FR_DSR) +@@ -296,12 +294,12 @@ static void pl010_break_ctl(struct uart_ + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); +- lcr_h = readb(uap->port.membase + UART010_LCRH); ++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; +- writel(lcr_h, uap->port.membase + UART010_LCRH); ++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH); + spin_unlock_irqrestore(&uap->port.lock, flags); + } + +@@ -329,12 +327,12 @@ static int pl010_startup(struct uart_por + /* + * initialise the old status of the modem signals + */ +- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; ++ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* + * Finally, enable interrupts + */ +- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, ++ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, + uap->port.membase + UART010_CR); + + return 0; +@@ -357,10 +355,10 @@ static void pl010_shutdown(struct uart_p + /* + * disable all interrupts, disable the port + */ +- writel(0, uap->port.membase + UART010_CR); ++ __raw_writel(0, uap->port.membase + UART010_CR); + + /* disable break condition and fifos */ +- writel(readb(uap->port.membase + UART010_LCRH) & ++ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) & + ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), + uap->port.membase + UART010_LCRH); + +@@ -382,7 +380,7 @@ pl010_set_termios(struct uart_port *port + /* + * Ask the core to calculate the divisor for us. + */ +- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); ++ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { +@@ -445,25 +443,25 @@ pl010_set_termios(struct uart_port *port + uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; + + /* first, disable everything */ +- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; ++ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= UART010_CR_MSIE; + +- writel(0, uap->port.membase + UART010_CR); ++ __raw_writel(0, uap->port.membase + UART010_CR); + + /* Set baud rate */ + quot -= 1; +- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); +- writel(quot & 0xff, uap->port.membase + UART010_LCRL); ++ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); ++ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ +- writel(lcr_h, uap->port.membase + UART010_LCRH); +- writel(old_cr, uap->port.membase + UART010_CR); ++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH); ++ __raw_writel(old_cr, uap->port.membase + UART010_CR); + + spin_unlock_irqrestore(&uap->port.lock, flags); + } +@@ -545,7 +543,7 @@ static struct uart_ops amba_pl010_pops = + .verify_port = pl010_verify_port, + }; + +-static struct uart_amba_port *amba_ports[UART_NR]; ++static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR]; + + #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE + +@@ -555,10 +553,10 @@ static void pl010_console_putchar(struct + unsigned int status; + + do { +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + barrier(); + } while (!UART_TX_READY(status)); +- writel(ch, uap->port.membase + UART01x_DR); ++ __raw_writel(ch, uap->port.membase + UART01x_DR); + } + + static void +@@ -572,8 +570,8 @@ pl010_console_write(struct console *co, + /* + * First save the CR then disable the interrupts + */ +- old_cr = readb(uap->port.membase + UART010_CR); +- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); ++ old_cr = __raw_readl(uap->port.membase + UART010_CR); ++ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); + + uart_console_write(&uap->port, s, count, pl010_console_putchar); + +@@ -582,10 +580,10 @@ pl010_console_write(struct console *co, + * and restore the TCR + */ + do { +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + barrier(); + } while (status & UART01x_FR_BUSY); +- writel(old_cr, uap->port.membase + UART010_CR); ++ __raw_writel(old_cr, uap->port.membase + UART010_CR); + + clk_disable(uap->clk); + } +@@ -594,9 +592,9 @@ static void __init + pl010_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) + { +- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { ++ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, quot; +- lcr_h = readb(uap->port.membase + UART010_LCRH); ++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { +@@ -611,8 +609,8 @@ pl010_console_get_options(struct uart_am + else + *bits = 8; + +- quot = readb(uap->port.membase + UART010_LCRL) | +- readb(uap->port.membase + UART010_LCRM) << 8; ++ quot = __raw_readl(uap->port.membase + UART010_LCRL) | ++ __raw_readl(uap->port.membase + UART010_LCRM) << 8; + *baud = uap->port.uartclk / (16 * (quot + 1)); + } + } +@@ -631,7 +629,7 @@ static int __init pl010_console_setup(st + * if so, search for the first available port that does have + * console support. + */ +- if (co->index >= UART_NR) ++ if (co->index >= SERIAL_AMBA_NR) + co->index = 0; + uap = amba_ports[co->index]; + if (!uap) +@@ -673,7 +671,7 @@ static struct uart_driver amba_reg = { + .dev_name = "ttyAM", + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, +- .nr = UART_NR, ++ .nr = SERIAL_AMBA_NR, + .cons = AMBA_CONSOLE, + }; + +--- a/drivers/tty/serial/Kconfig ++++ b/drivers/tty/serial/Kconfig +@@ -25,10 +25,18 @@ config SERIAL_AMBA_PL010 + help + This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have + an Integrator/AP or Integrator/PP2 platform, or if you have a +- Cirrus Logic EP93xx CPU, say Y or M here. ++ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here. + + If unsure, say N. + ++config SERIAL_AMBA_PL010_NUMPORTS ++ int "Maximum number of AMBA PL010 serial ports" ++ depends on SERIAL_AMBA_PL010 ++ default "8" ++ ---help--- ++ Set this to the number of serial ports you want the AMBA PL010 driver ++ to support. ++ + config SERIAL_AMBA_PL010_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL010=y diff --git a/target/linux/adm5120/patches-3.18/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-3.18/203-gpio_leds_brightness.patch new file mode 100644 index 0000000000..5345022da4 --- /dev/null +++ b/target/linux/adm5120/patches-3.18/203-gpio_leds_brightness.patch @@ -0,0 +1,27 @@ +--- a/drivers/leds/leds-gpio.c ++++ b/drivers/leds/leds-gpio.c +@@ -55,13 +55,17 @@ static void gpio_led_set(struct led_clas + container_of(led_cdev, struct gpio_led_data, cdev); + int level; + +- if (value == LED_OFF) +- level = 0; +- else +- level = 1; +- +- if (led_dat->active_low) +- level = !level; ++ switch (value) { ++ case LED_OFF: ++ level = led_dat->active_low ? 1 : 0; ++ break; ++ case LED_FULL: ++ level = led_dat->active_low ? 0 : 1; ++ break; ++ default: ++ level = value; ++ break; ++ } + + /* Setting GPIOs with I2C/etc requires a task context, and we don't + * seem to have a reliable way to know if we're already in one; so diff --git a/target/linux/adm5120/patches-3.18/310-adm5120_wdt.patch b/target/linux/adm5120/patches-3.18/310-adm5120_wdt.patch new file mode 100644 index 0000000000..4b6db8b8db --- /dev/null +++ b/target/linux/adm5120/patches-3.18/310-adm5120_wdt.patch @@ -0,0 +1,31 @@ +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -1116,6 +1116,18 @@ config RC32434_WDT + To compile this driver as a module, choose M here: the + module will be called rc32434_wdt. + ++config ADM5120_WDT ++ tristate "Infineon ADM5120 SoC hardware watchdog" ++ depends on WATCHDOG && ADM5120 ++ help ++ This is a driver for hardware watchdog integrated in Infineon ++ ADM5120 SoC. This watchdog simply watches your kernel to make sure ++ it doesn't freeze, and if it does, it reboots your computer after a ++ certain amount of time. ++ ++ To compile this driver as a module, choose M here: the module will be ++ called adm5120_wdt. ++ + config INDYDOG + tristate "Indy/I2 Hardware Watchdog" + depends on SGI_HAS_INDYDOG +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -131,6 +131,7 @@ obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o + obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o + obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o + obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o ++obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o + obj-$(CONFIG_INDYDOG) += indydog.o + obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o + obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o