From: Luka Perkov Date: Wed, 25 Sep 2013 18:07:24 +0000 (+0000) Subject: imx6: add support for gw51xx X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=77d075aa541665a5a96223686772e96ee1a9442b;p=openwrt%2Fstaging%2Fstintel.git imx6: add support for gw51xx The Gateworks GW51xx family of products is based on the Freescale i.MX6DL SoC and offers a small form-factor with peripherals such as: - i.MX6DL 512MB DDR3 - 256MB NAND FLASH - 1x PCIe - 1x USB EHCI (to PCIe socket) - 1x USB OTG - HDMI out - Analog Video in - Gateworks System Controller Signed-off-by: Tim Harvey SVN-Revision: 38189 --- diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts new file mode 100644 index 0000000000..2f9215028a --- /dev/null +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts @@ -0,0 +1,236 @@ +/* + * Copyright 2013 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" + +/ { + model = "Gateworks Ventana GW51XX"; + compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl"; + + /* these are used by bootloader for disabling nodes */ + aliases { + can0 = &can1; + ethernet0 = &fec; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + ipu0 = &ipu1; + led0 = &led0; + led1 = &led1; + nand = &gpmi; + pwm0 = &pwm1; + pwm1 = &pwm2; + pwm2 = &pwm3; + pwm3 = &pwm4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + ssi0 = &ssi1; + ssi1 = &ssi2; + usb0 = &usbh3; + usb1 = &usbotg; + usdhc0 = &usdhc1; + usdhc1 = &usdhc2; + usdhc2 = &usdhc3; + usdhc3 = &usdhc4; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + default-state = "off"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_2p5v: 2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 30 0>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_2>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + + eeprom: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + hwmon: gsc@29 { + compatible = "gw,gsp"; + reg = <0x29>; + }; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_2>; +}; + +&i2c3 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_2>; + + videoin: adv7180@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ + MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ + MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ + MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ + MX6DL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ + MX6DL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ + MX6DL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ + >; + }; + }; +}; + +&pcie { + reset-gpio = <&gpio1 0 0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_1>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; diff --git a/target/linux/imx6/patches-3.10/112-gw51xx.patch b/target/linux/imx6/patches-3.10/112-gw51xx.patch new file mode 100644 index 0000000000..1749c28491 --- /dev/null +++ b/target/linux/imx6/patches-3.10/112-gw51xx.patch @@ -0,0 +1,161 @@ +--- a/arch/arm/boot/dts/imx6dl.dtsi ++++ b/arch/arm/boot/dts/imx6dl.dtsi +@@ -80,6 +80,95 @@ + }; + }; + ++ gpmi-nand { ++ pinctrl_gpmi_nand_1: gpmi-nand-1 { ++ fsl,pins = < ++ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 ++ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 ++ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 ++ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000 ++ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 ++ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 ++ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 ++ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 ++ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 ++ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 ++ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 ++ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 ++ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 ++ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 ++ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 ++ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 ++ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 ++ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 ++ MX6DL_PAD_SD4_DAT0__NAND_DQS 0x00b1 ++ >; ++ }; ++ ++ /* No strobe */ ++ pinctrl_gpmi_nand_2: gpmi-nand-2 { ++ fsl,pins = < ++ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 ++ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 ++ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 ++ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000 ++ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 ++ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 ++ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 ++ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 ++ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 ++ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 ++ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 ++ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 ++ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 ++ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 ++ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 ++ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 ++ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 ++ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 ++ >; ++ }; ++ }; ++ ++ i2c1 { ++ pinctrl_i2c1_1: i2c1grp-1 { ++ fsl,pins = < ++ MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 ++ MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 ++ >; ++ }; ++ }; ++ ++ i2c2 { ++ pinctrl_i2c2_1: i2c2grp-1 { ++ fsl,pins = < ++ MX6DL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 ++ MX6DL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 ++ >; ++ }; ++ pinctrl_i2c2_2: i2c2grp-2 { ++ fsl,pins = < ++ MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 ++ MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 ++ >; ++ }; ++ }; ++ ++ i2c3 { ++ pinctrl_i2c3_1: i2c3grp-1 { ++ fsl,pins = < ++ MX6DL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 ++ MX6DL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 ++ >; ++ }; ++ pinctrl_i2c3_2: i2c3grp-2 { ++ fsl,pins = < ++ MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 ++ MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 ++ >; ++ }; ++ }; ++ + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < +@@ -87,6 +176,36 @@ + MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; ++ pinctrl_uart1_2: uart1grp-2 { ++ fsl,pins = < ++ MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 ++ MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 ++ >; ++ }; ++ }; ++ ++ uart2 { ++ pinctrl_uart2_1: uart2grp-1 { ++ fsl,pins = < ++ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 ++ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 ++ >; ++ }; ++ pinctrl_uart2_2: uart2grp-2 { ++ fsl,pins = < ++ MX6DL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 ++ MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 ++ >; ++ }; ++ }; ++ ++ uart3 { ++ pinctrl_uart3_1: uart3grp-1 { ++ fsl,pins = < ++ MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 ++ MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 ++ >; ++ }; + }; + + uart4 { +@@ -97,6 +216,15 @@ + >; + }; + }; ++ ++ uart5 { ++ pinctrl_uart5_1: uart5grp-1 { ++ fsl,pins = < ++ MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 ++ MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 ++ >; ++ }; ++ }; + + usbotg { + pinctrl_usbotg_2: usbotggrp-2 { +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -119,6 +119,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ + imx6q-arm2.dtb \ + imx6q-gw5400-a.dtb \ + imx6q-gw54xx.dtb \ ++ imx6dl-gw51xx.dtb \ + imx6q-sabreauto.dtb \ + imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb \