From: Mikhail Zhilkin Date: Sun, 20 Oct 2024 12:20:51 +0000 (+0000) Subject: uboot-mediatek: add MERCUSYS MR90X v1 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=77cc4b712700e51f5d779e4e7385639fa4e16ca9;p=openwrt%2Fstaging%2Fblocktrron.git uboot-mediatek: add MERCUSYS MR90X v1 support Add U-Boot replacement loader for the MERCUSYS MR90X. This is required to increase available flash space in OpenWrt. Signed-off-by: Mikhail Zhilkin Link: https://github.com/openwrt/openwrt/pull/16744 Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index fa314da399..8fda29afa6 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -570,6 +570,18 @@ define U-Boot/mt7986_jdcloud_re-cp-03 DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4 endef +define U-Boot/mt7986_mercusys_mr90x-v1 + NAME:=MERCUSYS MR90X v1 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=mercusys_mr90x-v1-ubi + UBOOT_CONFIG:=mt7986_mercusys_mr90x-v1 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=spim-nand-ubi + BL2_SOC:=mt7986 + BL2_DDRTYPE:=ddr3 + DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ubi-ddr3 +endef + define U-Boot/mt7986_netcore_n60 NAME:=Netcore N60 BUILD_SUBTARGET:=filogic @@ -847,6 +859,7 @@ UBOOT_TARGETS := \ mt7986_bananapi_bpi-r3-mini-snand \ mt7986_glinet_gl-mt6000 \ mt7986_jdcloud_re-cp-03 \ + mt7986_mercusys_mr90x-v1 \ mt7986_netcore_n60 \ mt7986_tplink_tl-xdr4288 \ mt7986_tplink_tl-xdr6086 \ diff --git a/package/boot/uboot-mediatek/patches/459-add-mercusys-mr90x-v1.patch b/package/boot/uboot-mediatek/patches/459-add-mercusys-mr90x-v1.patch new file mode 100644 index 0000000000..4fae619aa1 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/459-add-mercusys-mr90x-v1.patch @@ -0,0 +1,343 @@ +--- /dev/null ++++ b/configs/mt7986_mercusys_mr90x-v1_defconfig +@@ -0,0 +1,107 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7986b-mercusys_mr90x-v1" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7986=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007ef00 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986b-mercusys_mr90x-v1.dtb" ++CONFIG_LOGLEVEL=7 ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_LOG=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="MT7986> " ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="mercusys_mr90x-v1_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_NETCONSOLE=y ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++# CONFIG_I2C is not set ++# CONFIG_MMC is not set ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7986=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_RANDOM_UUID=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_LMB_MAX_REGIONS=64 +--- /dev/null ++++ b/arch/arm/dts/mt7986b-mercusys_mr90x-v1.dts +@@ -0,0 +1,174 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (c) 2024 ++ * Author: Mikhail Zhilkin ++ */ ++ ++/dts-v1/; ++#include "mt7986.dtsi" ++#include ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "MERCUSYS MR90X v1"; ++ compatible = "mediatek,mt7986", "mediatek,mt7986-rfb"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x20000000>; ++ }; ++ ++ keys { ++ compatible = "gpio-keys"; ++ ++ reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&gpio 10 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led-0 { ++ label = "green:lan2"; ++ gpios = <&gpio 7 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-1 { ++ label = "green:lan1"; ++ gpios = <&gpio 9 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-2 { ++ label = "green:lan0"; ++ gpios = <&gpio 12 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-3 { ++ label = "green:wan"; ++ gpios = <&gpio 13 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-4 { ++ label = "amber:status"; ++ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ led_status_green: led-5 { ++ label = "green:status"; ++ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "disabled"; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <0>; ++ phy-mode = "2500base-x"; ++ mediatek,switch = "mt7531"; ++ reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; ++ ++ fixed-link { ++ speed = <2500>; ++ full-duplex; ++ }; ++}; ++ ++&pinctrl { ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++ ++ spic_pins: spi1-pins-func-1 { ++ mux { ++ function = "spi"; ++ groups = "spi1_2"; ++ }; ++ }; ++ ++ uart1_pins: spi1-pins-func-3 { ++ mux { ++ function = "uart"; ++ groups = "uart1_2"; ++ }; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nand@1 { ++ compatible = "spi-nand"; ++ reg = <1>; ++ spi-max-frequency = <20000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ reg = <0x0 0x100000>; ++ label = "bl2"; ++ }; ++ ++ partition@100000 { ++ reg = <0x100000 0x100000>; ++ label = "factory"; ++ }; ++ ++ partition@200000 { ++ reg = <0x200000 0x7e00000>; ++ label = "ubi"; ++ }; ++ }; ++ }; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; +--- /dev/null ++++ b/mercusys_mr90x-v1_env +@@ -0,0 +1,53 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootargs=console=ttyS0,115200n8 console_msg_format=syslog ++bootcmd=run check_buttons ; run boot_production ; run boot_recovery ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-mercusys_mr90x-v1-ubi-squashfs-sysupgrade.itb ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) [SPI-NAND] ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_production ; noboot= ; replacevol= ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=noboot=1 ; replacevol=1 ; run boot_tftp_recovery ; noboot= ; replacevol= ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_default=run led_boot ; run bootcmd ; run boot_recovery ; replacevol=1 ; run boot_tftp_forever ++boot_production=run led_boot ; run ubi_read_production && bootm $loadaddr#$bootconf ++boot_recovery=run led_boot ; run ubi_read_recovery && bootm $loadaddr#$bootconf ++boot_tftp=run led_boot ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_forever=run led_boot ; while true ; do run boot_tftp ; sleep 1 ; done ++boot_tftp_production=run led_boot ; tftpboot $loadaddr $bootfile_upg && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_production ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=run led_boot ; tftpboot $loadaddr $bootfile && test $replacevol = 1 && iminfo $loadaddr && run ubi_write_recovery ; if test $noboot = 1 ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_write_fip=run led_boot ; tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory ++boot_tftp_write_bl2=run led_boot ; tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2 ++check_buttons=if button reset ; then run boot_tftp ; fi ++ethaddr_factory=mtd read factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x40088000 0x6 ; setenv ethaddr_factory ++led_boot=led green:status off ; led amber:status on ++reset_factory=mw $loadaddr 0xff 0x1f000 ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ; ubi remove rootfs_data ++snand_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr 0x0 0x40000 ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x1f000 dynamic ; ubi check ubootenv2 || ubi create ubootenv2 0x1f000 dynamic ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_fip=run ubi_remove_rootfs ; ubi check fip && ubi remove fip ; ubi create fip $filesize static && ubi write $loadaddr fip $filesize ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; bootmenu ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver"