From: Jonas Gorski Date: Tue, 25 Aug 2015 22:04:53 +0000 (+0000) Subject: brcm63xx: enable dual rx/tx spi support for hsspi X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=77a70a071619c12b71990180f3440dfdcd5962bd;p=openwrt%2Fstaging%2Fynezz.git brcm63xx: enable dual rx/tx spi support for hsspi should improve flash access times. Should be harmless to gnerally enable regardless if a flash supporting dual reads is attached. In doubt, spi-nor will just fall back to serial reads. Signed-off-by: Jonas Gorski SVN-Revision: 46725 --- diff --git a/target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch b/target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch new file mode 100644 index 0000000000..1be40ebc1e --- /dev/null +++ b/target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch @@ -0,0 +1,68 @@ +From 61dc388f577b6f984797949f32c30021d9ea73dc Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Sun, 23 Aug 2015 12:16:02 +0200 +Subject: [PATCH V2] spi/bcm63xx-hsspi: add support for dual spi read/write + +Add support for dual read/writes on spi-bcm63xx-hsspi. This has been +tested with a s25fl129p1 dual read capable spi flash, with a nice speed +improvement: + +serial read: + +root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192 +2032+0 records in +2032+0 records out +real 0m 4.39s +user 0m 0.00s +sys 0m 1.55s + +dual read: + +root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192 +2032+0 records in +2032+0 records out +real 0m 3.09s +user 0m 0.00s +sys 0m 1.56s + +Signed-off-by: Jonas Gorski +--- + drivers/spi/spi-bcm63xx-hsspi.c | 13 +++++++++---- + 1 file changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/spi/spi-bcm63xx-hsspi.c ++++ b/drivers/spi/spi-bcm63xx-hsspi.c +@@ -76,6 +76,7 @@ + #define HSSPI_FIFO_REG(x) (0x200 + (x) * 0x200) + + ++#define HSSPI_OP_MULTIBIT BIT(11) + #define HSSPI_OP_CODE_SHIFT 13 + #define HSSPI_OP_SLEEP (0 << HSSPI_OP_CODE_SHIFT) + #define HSSPI_OP_READ_WRITE (1 << HSSPI_OP_CODE_SHIFT) +@@ -171,9 +172,12 @@ static int bcm63xx_hsspi_do_txrx(struct + if (opcode != HSSPI_OP_READ) + step_size -= HSSPI_OPCODE_LEN; + +- __raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT | +- 2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT | +- 2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff, ++ if ((opcode == HSSPI_OP_READ && t->rx_nbits == SPI_NBITS_DUAL) || ++ (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL)) ++ opcode |= HSSPI_OP_MULTIBIT; ++ ++ __raw_writel(1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT | ++ 1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT | 0xff, + bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select)); + + while (pending > 0) { +@@ -374,7 +378,8 @@ static int bcm63xx_hsspi_probe(struct pl + master->num_chipselect = 8; + master->setup = bcm63xx_hsspi_setup; + master->transfer_one_message = bcm63xx_hsspi_transfer_one; +- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; ++ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | ++ SPI_RX_DUAL | SPI_TX_DUAL; + master->bits_per_word_mask = SPI_BPW_MASK(8); + master->auto_runtime_pm = true; + diff --git a/target/linux/brcm63xx/patches-4.1/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/brcm63xx/patches-4.1/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch index 3a09563427..0c317cb1b2 100644 --- a/target/linux/brcm63xx/patches-4.1/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch +++ b/target/linux/brcm63xx/patches-4.1/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch @@ -5,7 +5,7 @@ Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present Signed-off-by: Jonas Gorski --- - arch/mips/bcm63xx/dev-flash.c | 33 +++++++++++++++++++- + arch/mips/bcm63xx/dev-flash.c | 35 +++++++++++++++++++- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 + 2 files changed, 33 insertions(+), 2 deletions(-) @@ -95,15 +95,17 @@ Signed-off-by: Jonas Gorski if (val & STRAPBUS_63268_BOOT_SEL_SERIAL) return BCM63XX_FLASH_TYPE_SERIAL; else -@@ -195,8 +232,15 @@ int __init bcm63xx_flash_register(void) +@@ -195,8 +232,17 @@ int __init bcm63xx_flash_register(void) return platform_device_register(&mtd_dev); case BCM63XX_FLASH_TYPE_SERIAL: - pr_warn("unsupported serial flash detected\n"); - return -ENODEV; + if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || -+ BCMCPU_IS_63268()) ++ BCMCPU_IS_63268()) { + bcm63xx_spi_flash_info[0].bus_num = 1; ++ bcm63xx_spi_flash_info[0].mode = SPI_RX_DUAL; ++ } + + if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) + bcm63xx_flash_data.max_transfer_len = SPI_6358_MSG_DATA_SIZE; diff --git a/target/linux/brcm63xx/patches-4.1/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/brcm63xx/patches-4.1/415-MIPS-BCM63XX-export-the-attached-flash-type.patch index 44763bb256..d874059410 100644 --- a/target/linux/brcm63xx/patches-4.1/415-MIPS-BCM63XX-export-the-attached-flash-type.patch +++ b/target/linux/brcm63xx/patches-4.1/415-MIPS-BCM63XX-export-the-attached-flash-type.patch @@ -11,7 +11,7 @@ Signed-off-by: Jonas Gorski --- a/arch/mips/bcm63xx/dev-flash.c +++ b/arch/mips/bcm63xx/dev-flash.c -@@ -250,3 +250,8 @@ int __init bcm63xx_flash_register(void) +@@ -252,3 +252,8 @@ int __init bcm63xx_flash_register(void) return -ENODEV; } }