From: Imre Kaloz Date: Tue, 27 Oct 2009 19:19:07 +0000 (+0000) Subject: remove 2.6.28 support from ppc40x X-Git-Tag: reboot~22046 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7776a7ddeced2af1e6f4947120191fc45d5569a8;p=openwrt%2Fstaging%2Fpepe2k.git remove 2.6.28 support from ppc40x SVN-Revision: 18187 --- diff --git a/target/linux/ppc40x/config-default b/target/linux/ppc40x/config-default deleted file mode 100644 index b8ed9051b2..0000000000 --- a/target/linux/ppc40x/config-default +++ /dev/null @@ -1,181 +0,0 @@ -CONFIG_405EP=y -CONFIG_405EX=y -CONFIG_40x=y -# CONFIG_44x is not set -CONFIG_4xx=y -CONFIG_4xx_SOC=y -# CONFIG_6xx is not set -# CONFIG_8139TOO is not set -# CONFIG_ACADIA is not set -# CONFIG_ADVANCED_OPTIONS is not set -# CONFIG_AGP is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_ARCH_SUPPORTS_MSI=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_AUDIT_ARCH=y -CONFIG_BASE_SMALL=0 -CONFIG_BITREVERSE=y -# CONFIG_BOOKE_WDT is not set -CONFIG_BOUNCE=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd" -CONFIG_CMDLINE_BOOL=y -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_CONSISTENT_START=0xff100000 -# CONFIG_CPU_FREQ is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEFAULT_UIMAGE is not set -CONFIG_DEVPORT=y -# CONFIG_E200 is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_EDAC is not set -# CONFIG_EP405 is not set -CONFIG_EXTRA_TARGETS="uImage" -CONFIG_FORCE_MAX_ZONEORDER=11 -# CONFIG_FSL_ULI1575 is not set -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_IOMAP is not set -CONFIG_GENERIC_NVRAM=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_GENERIC_TIME_VSYSCALL=y -# CONFIG_GEN_RTC is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAS_RAPIDIO is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FUNCTION_TRACER=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_HAVE_LMB=y -CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -# CONFIG_HCU4 is not set -# CONFIG_HIGHMEM is not set -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -CONFIG_IBM_NEW_EMAC=y -# CONFIG_IBM_NEW_EMAC_DEBUG is not set -CONFIG_IBM_NEW_EMAC_EMAC4=y -CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 -CONFIG_IBM_NEW_EMAC_RGMII=y -CONFIG_IBM_NEW_EMAC_RXB=256 -CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 -CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 -CONFIG_IBM_NEW_EMAC_TXB=256 -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_IOMMU_HELPER is not set -# CONFIG_IPIC is not set -# CONFIG_IRQSTACKS is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_ISA_DMA_API=y -CONFIG_KERNEL_START=0xc0000000 -CONFIG_KILAUEA=y -# CONFIG_LEDS_GPIO is not set -CONFIG_LOWMEM_SIZE=0x30000000 -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_MAGICBOXV1=y -CONFIG_MAGICBOXV2=y -# CONFIG_MAKALU is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_WEIRD is not set -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_NATSEMI is not set -CONFIG_NOT_COHERENT_CACHE=y -# CONFIG_NVRAM is not set -CONFIG_OF=y -CONFIG_OF_DEVICE=y -CONFIG_OF_GPIO=y -CONFIG_OPENRB_LIGHT=y -CONFIG_OPENRB_MEDIUM=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_PCI=y -CONFIG_PCIEAER=y -# CONFIG_PCIEASPM is not set -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_MSI=y -CONFIG_PCI_SYSCALL=y -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_PPC40x_SIMPLE=y -CONFIG_PPC4xx_PCI_EXPRESS=y -# CONFIG_PPC64 is not set -# CONFIG_PPC_85xx is not set -# CONFIG_PPC_8xx is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_DCR=y -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_PPC_DCR_NATIVE=y -# CONFIG_PPC_EARLY_DEBUG is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_INDIRECT_IO is not set -CONFIG_PPC_INDIRECT_PCI=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_PPC_MPC106 is not set -CONFIG_PPC_OF=y -CONFIG_PPC_PCI_CHOICE=y -# CONFIG_PPC_RTAS is not set -CONFIG_PPC_UDBG_16550=y -# CONFIG_PQ2ADS is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_R6040 is not set -CONFIG_RESOURCES_64BIT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SCHED_HRTICK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_RSA is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_TICK_ONESHOT=y -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_WALNUT is not set -CONFIG_WORD_SIZE=32 -# CONFIG_XILINX_SYSACE is not set -# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set diff --git a/target/linux/ppc40x/patches/001-kilauea_openwrt_flashmap.patch b/target/linux/ppc40x/patches/001-kilauea_openwrt_flashmap.patch deleted file mode 100644 index 44799cb326..0000000000 --- a/target/linux/ppc40x/patches/001-kilauea_openwrt_flashmap.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/powerpc/boot/dts/kilauea.dts -+++ b/arch/powerpc/boot/dts/kilauea.dts -@@ -140,15 +140,15 @@ - #size-cells = <1>; - partition@0 { - label = "kernel"; -- reg = <0x00000000 0x00200000>; -+ reg = <0x00000000 0x001e0000>; - }; -- partition@200000 { -- label = "root"; -- reg = <0x00200000 0x00200000>; -+ partition@1e0000 { -+ label = "device-tree"; -+ reg = <0x001e0000 0x0020000>; - }; -- partition@400000 { -- label = "user"; -- reg = <0x00400000 0x03b60000>; -+ partition@200000 { -+ label = "rootfs"; -+ reg = <0x00200000 0x03d60000>; - }; - partition@3f60000 { - label = "env"; diff --git a/target/linux/ppc40x/patches/002-disable_emac_loopback_mode.patch b/target/linux/ppc40x/patches/002-disable_emac_loopback_mode.patch deleted file mode 100644 index 18fefd872d..0000000000 --- a/target/linux/ppc40x/patches/002-disable_emac_loopback_mode.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/powerpc/platforms/40x/kilauea.c -+++ b/arch/powerpc/platforms/40x/kilauea.c -@@ -21,6 +21,8 @@ - #include - #include - #include -+#include -+#include - - static __initdata struct of_device_id kilauea_of_bus[] = { - { .compatible = "ibm,plb4", }, -@@ -46,6 +48,13 @@ static int __init kilauea_probe(void) - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - -+ /* -+ * 405EX(r) has SDR0_MFR[E0CS/E1CS] set after reset. This selects -+ * the internal loopback mode. Clear these bits so that both EMACs -+ * don't use loopback mode as deafult. -+ */ -+ mtdcri(SDR0, SDR0_MFR, mfdcri(SDR0, SDR0_MFR) & ~0x0c000000); -+ - return 1; - } - diff --git a/target/linux/ppc40x/patches/003-powerpc-add-EBC_BXCR_BW-defines.patch b/target/linux/ppc40x/patches/003-powerpc-add-EBC_BXCR_BW-defines.patch deleted file mode 100644 index 8e380c1c9c..0000000000 --- a/target/linux/ppc40x/patches/003-powerpc-add-EBC_BXCR_BW-defines.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/arch/powerpc/boot/dcr.h -+++ b/arch/powerpc/boot/dcr.h -@@ -57,6 +57,9 @@ static const unsigned long sdram_bxcr[] - #define EBC_BXCR_BU_WO 0x00010000 - #define EBC_BXCR_BU_RW 0x00018000 - #define EBC_BXCR_BW 0x00006000 -+#define EBC_BXCR_BW_8 0x00000000 -+#define EBC_BXCR_BW_16 0x00002000 -+#define EBC_BXCR_BW_32 0x00006000 - #define EBC_B0AP 0x10 - #define EBC_B1AP 0x11 - #define EBC_B2AP 0x12 diff --git a/target/linux/ppc40x/patches/005-magicboxv1.patch b/target/linux/ppc40x/patches/005-magicboxv1.patch deleted file mode 100644 index 7c2abd38c7..0000000000 --- a/target/linux/ppc40x/patches/005-magicboxv1.patch +++ /dev/null @@ -1,313 +0,0 @@ ---- /dev/null -+++ b/arch/powerpc/boot/cuboot-magicboxv1.c -@@ -0,0 +1,40 @@ -+/* -+ * Old U-boot compatibility for Magicbox v1 -+ * -+ * Author: Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "ops.h" -+#include "io.h" -+#include "dcr.h" -+#include "stdio.h" -+#include "4xx.h" -+#include "44x.h" -+#include "cuboot.h" -+ -+#define TARGET_4xx -+#define TARGET_405EP -+#include "ppcboot.h" -+ -+static bd_t bd; -+ -+static void magicboxv1_fixups(void) -+{ -+ ibm405ep_fixup_clocks(25000000); -+ ibm4xx_sdram_fixup_memsize(); -+ dt_fixup_mac_addresses(&bd.bi_enetaddr); -+} -+ -+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, -+ unsigned long r6, unsigned long r7) -+{ -+ CUBOOT_INIT(); -+ platform_ops.fixups = magicboxv1_fixups; -+ platform_ops.exit = ibm40x_dbcr_reset; -+ fdt_init(_dtb_start); -+ serial_console_init(); -+} ---- /dev/null -+++ b/arch/powerpc/boot/dts/magicboxv1.dts -@@ -0,0 +1,217 @@ -+/* -+ * Device Tree Source for Magicbox v1 -+ * -+ * Copyright 2008 Imre Kaloz -+ * -+ * Based on walnut.dts -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ */ -+ -+/dts-v1/; -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ model = "magicboxv1"; -+ compatible = "magicboxv1"; -+ dcr-parent = <&{/cpus/cpu@0}>; -+ -+ aliases { -+ ethernet0 = &EMAC; -+ serial0 = &UART; -+ }; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ device_type = "cpu"; -+ model = "PowerPC,405EP"; -+ reg = <0x00000000>; -+ clock-frequency = <0xbebc200>; /* Filled in by zImage */ -+ timebase-frequency = <0>; /* Filled in by zImage */ -+ i-cache-line-size = <20>; -+ d-cache-line-size = <20>; -+ i-cache-size = <4000>; -+ d-cache-size = <4000>; -+ dcr-controller; -+ dcr-access-method = "native"; -+ }; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */ -+ }; -+ -+ UIC0: interrupt-controller { -+ compatible = "ibm,uic"; -+ interrupt-controller; -+ cell-index = <0>; -+ dcr-reg = <0x0c0 0x009>; -+ #address-cells = <0>; -+ #size-cells = <0>; -+ #interrupt-cells = <2>; -+ }; -+ -+ plb { -+ compatible = "ibm,plb3"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ SDRAM0: memory-controller { -+ compatible = "ibm,sdram-405ep"; -+ dcr-reg = <0x010 0x002>; -+ }; -+ -+ MAL: mcmal { -+ compatible = "ibm,mcmal-405ep", "ibm,mcmal"; -+ dcr-reg = <0x180 0x062>; -+ num-tx-chans = <4>; -+ num-rx-chans = <2>; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xb 0x4 /* TXEOB */ -+ 0xc 0x4 /* RXEOB */ -+ 0xa 0x4 /* SERR */ -+ 0xd 0x4 /* TXDE */ -+ 0xe 0x4 /* RXDE */>; -+ }; -+ -+ POB0: opb { -+ compatible = "ibm,opb-405ep", "ibm,opb"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0xef600000 0xef600000 0x00a00000>; -+ dcr-reg = <0x0a0 0x005>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ UART: serial@ef600300 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600300 0x00000008>; -+ virtual-reg = <0xef600300>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x0 0x4>; -+ }; -+ -+ IIC: i2c@ef600500 { -+ compatible = "ibm,iic-405ep", "ibm,iic"; -+ reg = <0xef600500 0x00000011>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x2 0x4>; -+ }; -+ -+ GPIO: gpio@ef600700 { -+ compatible = "ibm,gpio-405ep"; -+ reg = <0xef600700 0x00000020>; -+ }; -+ -+ EMAC: ethernet@ef600800 { -+ linux,network-index = <0x0>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xf 0x4 /* Ethernet */ -+ 0x9 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600800 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <0>; -+ mal-rx-channel = <0>; -+ cell-index = <0>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ phy-mode = "mii"; -+ phy-map = <0x00000000>; -+ }; -+ -+ }; -+ -+ EBC0: ebc { -+ compatible = "ibm,ebc-405ep", "ibm,ebc"; -+ dcr-reg = <0x012 0x002>; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ /* The ranges property is supplied by the bootwrapper -+ * and is based on the firmware's configuration of the -+ * EBC bridge -+ */ -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ nor_flash@ffc00000 { -+ compatible = "cfi-flash"; -+ bank-width = <2>; -+ reg = <0x00000000 0xffc00000 0x00400000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ partition@0 { -+ label = "linux"; -+ reg = <0x0 0x120000>; -+ }; -+ partition@120000 { -+ label = "rootfs"; -+ reg = <0x120000 0x2a0000>; -+ }; -+ partition@3c0000 { -+ label = "u-boot"; -+ reg = <0x3c0000 0x30000>; -+ read-only; -+ }; -+ }; -+ }; -+ -+ PCI0: pci@ec000000 { -+ device_type = "pci"; -+ #interrupt-cells = <1>; -+ #size-cells = <2>; -+ #address-cells = <3>; -+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; -+ primary; -+ reg = <0xeec00000 0x00000008 /* Config space access */ -+ 0xeed80000 0x00000004 /* IACK */ -+ 0xeed80000 0x00000004 /* Special cycle */ -+ 0xef480000 0x00000040>; /* Internal registers */ -+ -+ /* Outbound ranges, one memory and one IO, -+ * later cannot be changed. Chip supports a second -+ * IO range but we don't use it for now -+ */ -+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 -+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; -+ -+ /* Inbound 2GB range starting at 0 */ -+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; -+ -+ /* Magicbox v1 has all 4 IRQ pins tied together per slot */ -+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>; -+ interrupt-map = < -+ /* IDSEL 1 */ -+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 -+ -+ /* IDSEL 2 */ -+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 -+ -+ /* IDSEL 3 */ -+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 -+ -+ /* IDSEL 4 */ -+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 -+ >; -+ }; -+ }; -+ -+ chosen { -+ linux,stdout-path = "/plb/opb/serial@ef600300"; -+ }; -+}; ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -70,7 +70,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82 - cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ - cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ - virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ -- cuboot-acadia.c -+ cuboot-acadia.c cuboot-magicboxv1.c - src-boot := $(src-wlib) $(src-plat) empty.c - - src-boot := $(addprefix $(obj)/, $(src-boot)) -@@ -214,6 +214,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImag - image-$(CONFIG_EP405) += dtbImage.ep405 - image-$(CONFIG_WALNUT) += treeImage.walnut - image-$(CONFIG_ACADIA) += cuImage.acadia -+image-$(CONFIG_MAGICBOXV1) += cuImage.magicboxv1 - - # Board ports in arch/powerpc/platform/44x/Kconfig - image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony ---- a/arch/powerpc/platforms/40x/Kconfig -+++ b/arch/powerpc/platforms/40x/Kconfig -@@ -49,6 +49,16 @@ config KILAUEA - help - This option enables support for the AMCC PPC405EX evaluation board. - -+config MAGICBOXV1 -+ bool "Magicbox v1" -+ depends on 40x -+ default n -+ select PPC40x_SIMPLE -+ select 405EP -+ select PCI -+ help -+ This option enables support for the Magicbox v1 board. -+ - config MAKALU - bool "Makalu" - depends on 40x ---- a/arch/powerpc/platforms/40x/ppc40x_simple.c -+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c -@@ -51,7 +51,8 @@ machine_device_initcall(ppc40x_simple, p - * board.c file for it rather than adding it to this list. - */ - static char *board[] __initdata = { -- "amcc,acadia" -+ "amcc,acadia", -+ "magicboxv1" - }; - - static int __init ppc40x_probe(void) diff --git a/target/linux/ppc40x/patches/006-magicboxv2.patch b/target/linux/ppc40x/patches/006-magicboxv2.patch deleted file mode 100644 index 0d71464717..0000000000 --- a/target/linux/ppc40x/patches/006-magicboxv2.patch +++ /dev/null @@ -1,406 +0,0 @@ ---- /dev/null -+++ b/arch/powerpc/boot/cuboot-magicboxv2.c -@@ -0,0 +1,69 @@ -+/* -+ * Old U-boot compatibility for Magicbox v2 -+ * -+ * Author: Imre Kaloz -+ * Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "ops.h" -+#include "io.h" -+#include "dcr.h" -+#include "stdio.h" -+#include "4xx.h" -+#include "44x.h" -+#include "cuboot.h" -+ -+#define TARGET_4xx -+#define TARGET_405EP -+#include "ppcboot.h" -+ -+static bd_t bd; -+ -+static void fixup_cf_card(void) -+{ -+#define DCRN_CPC0_PCI_BASE 0xf9 -+#define CF_CS0_BASE 0xff100000 -+#define CF_CS1_BASE 0xff200000 -+ -+ /* Turn on PerWE instead of PCIsomething */ -+ mtdcr(DCRN_CPC0_PCI_BASE, -+ mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27)); -+ -+ /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+ /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+#undef DCRN_CPC0_PCI_BASE -+#undef CF_CS0_BASE -+#undef CF_CS1_BASE -+} -+ -+static void magicboxv2_fixups(void) -+{ -+ fixup_cf_card(); -+ ibm405ep_fixup_clocks(25000000); -+ ibm4xx_sdram_fixup_memsize(); -+ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); -+} -+ -+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, -+ unsigned long r6, unsigned long r7) -+{ -+ CUBOOT_INIT(); -+ platform_ops.fixups = magicboxv2_fixups; -+ platform_ops.exit = ibm40x_dbcr_reset; -+ fdt_init(_dtb_start); -+ serial_console_init(); -+} ---- /dev/null -+++ b/arch/powerpc/boot/dts/magicboxv2.dts -@@ -0,0 +1,281 @@ -+/* -+ * Device Tree Source for Magicbox v2 -+ * -+ * Copyright 2008 Imre Kaloz -+ * Copyright 2009 Gabor Juhos -+ * -+ * Based on walnut.dts -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ */ -+ -+/dts-v1/; -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ model = "magicboxv2"; -+ compatible = "magicboxv2"; -+ dcr-parent = <&{/cpus/cpu@0}>; -+ -+ aliases { -+ ethernet0 = &EMAC0; -+ ethernet1 = &EMAC1; -+ serial0 = &UART0; -+ serial1 = &UART1; -+ }; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ device_type = "cpu"; -+ model = "PowerPC,405EP"; -+ reg = <0x00000000>; -+ clock-frequency = <0xbebc200>; /* Filled in by zImage */ -+ timebase-frequency = <0>; /* Filled in by zImage */ -+ i-cache-line-size = <20>; -+ d-cache-line-size = <20>; -+ i-cache-size = <4000>; -+ d-cache-size = <4000>; -+ dcr-controller; -+ dcr-access-method = "native"; -+ }; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */ -+ }; -+ -+ UIC0: interrupt-controller { -+ compatible = "ibm,uic"; -+ interrupt-controller; -+ cell-index = <0>; -+ dcr-reg = <0x0c0 0x009>; -+ #address-cells = <0>; -+ #size-cells = <0>; -+ #interrupt-cells = <2>; -+ }; -+ -+ plb { -+ compatible = "ibm,plb3"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ SDRAM0: memory-controller { -+ compatible = "ibm,sdram-405ep"; -+ dcr-reg = <0x010 0x002>; -+ }; -+ -+ MAL: mcmal { -+ compatible = "ibm,mcmal-405ep", "ibm,mcmal"; -+ dcr-reg = <0x180 0x062>; -+ num-tx-chans = <4>; -+ num-rx-chans = <2>; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xb 0x4 /* TXEOB */ -+ 0xc 0x4 /* RXEOB */ -+ 0xa 0x4 /* SERR */ -+ 0xd 0x4 /* TXDE */ -+ 0xe 0x4 /* RXDE */>; -+ }; -+ -+ POB0: opb { -+ compatible = "ibm,opb-405ep", "ibm,opb"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0xef600000 0xef600000 0x00a00000>; -+ dcr-reg = <0x0a0 0x005>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ UART0: serial@ef600300 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600300 0x00000008>; -+ virtual-reg = <0xef600300>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x0 0x4>; -+ }; -+ -+ UART1: serial@ef600400 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600400 0x00000008>; -+ virtual-reg = <0xef600400>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x1 0x4>; -+ }; -+ -+ IIC: i2c@ef600500 { -+ compatible = "ibm,iic-405ep", "ibm,iic"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0xef600500 0x00000011>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x2 0x4>; -+ -+ dtt@48 { -+ compatible = "national,lm75"; -+ reg = <0x48>; -+ }; -+ -+ eeprom@50 { -+ compatible = "at24,24c16"; -+ reg = <0x50>; -+ }; -+ }; -+ -+ GPIO0: gpio-controller@ef600700 { -+ compatible = "ibm,ppc4xx-gpio"; -+ reg = <0xef600700 0x00000020>; -+ #gpio-cells = <2>; -+ gpio-controller; -+ }; -+ -+ EMAC0: ethernet@ef600800 { -+ linux,network-index = <0x0>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xf 0x4 /* Ethernet */ -+ 0x9 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600800 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <0>; -+ mal-rx-channel = <0>; -+ cell-index = <0>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ phy-mode = "mii"; -+ phy-map = <0x00000000>; -+ }; -+ -+ EMAC1: ethernet@ef600900 { -+ linux,network-index = <0x1>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0x11 0x4 /* Ethernet */ -+ 0x09 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600900 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <2>; -+ mal-rx-channel = <1>; -+ cell-index = <1>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ mdio-device = <&EMAC0>; -+ phy-mode = "mii"; -+ phy-map = <0x00000001>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ user { -+ label = "magicbox:red:user"; -+ gpios = <&GPIO0 2 1>; -+ }; -+ }; -+ }; -+ -+ EBC0: ebc { -+ compatible = "ibm,ebc-405ep", "ibm,ebc"; -+ dcr-reg = <0x012 0x002>; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ /* The ranges property is supplied by the bootwrapper -+ * and is based on the firmware's configuration of the -+ * EBC bridge -+ */ -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ cf_card@ff100000 { -+ compatible = "magicbox-cf", "pata-magicbox-cf"; -+ reg = <0x00000000 0xff100000 0x00001000 -+ 0x00000000 0xff200000 0x00001000>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >; -+ }; -+ -+ nor_flash@ffc00000 { -+ compatible = "cfi-flash"; -+ bank-width = <2>; -+ reg = <0x00000000 0xffc00000 0x00400000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ partition@0 { -+ label = "linux"; -+ reg = <0x0 0x120000>; -+ }; -+ partition@120000 { -+ label = "rootfs"; -+ reg = <0x120000 0x2a0000>; -+ }; -+ partition@3c0000 { -+ label = "u-boot"; -+ reg = <0x3c0000 0x30000>; -+ read-only; -+ }; -+ }; -+ }; -+ -+ PCI0: pci@ec000000 { -+ device_type = "pci"; -+ #interrupt-cells = <1>; -+ #size-cells = <2>; -+ #address-cells = <3>; -+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; -+ primary; -+ reg = <0xeec00000 0x00000008 /* Config space access */ -+ 0xeed80000 0x00000004 /* IACK */ -+ 0xeed80000 0x00000004 /* Special cycle */ -+ 0xef480000 0x00000040>; /* Internal registers */ -+ -+ /* Outbound ranges, one memory and one IO, -+ * later cannot be changed. Chip supports a second -+ * IO range but we don't use it for now -+ */ -+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 -+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; -+ -+ /* Inbound 2GB range starting at 0 */ -+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; -+ -+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>; -+ interrupt-map = < -+ /* IDSEL 1 */ -+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 -+ -+ /* IDSEL 2 */ -+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 -+ -+ /* IDSEL 3 */ -+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 -+ -+ /* IDSEL 4 */ -+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 -+ >; -+ }; -+ }; -+ -+ chosen { -+ linux,stdout-path = "/plb/opb/serial@ef600300"; -+ }; -+}; ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -70,7 +70,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82 - cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ - cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ - virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ -- cuboot-acadia.c cuboot-magicboxv1.c -+ cuboot-acadia.c cuboot-magicboxv1.c cuboot-magicboxv2.c - src-boot := $(src-wlib) $(src-plat) empty.c - - src-boot := $(addprefix $(obj)/, $(src-boot)) -@@ -215,6 +215,7 @@ image-$(CONFIG_EP405) += dtbImage.ep40 - image-$(CONFIG_WALNUT) += treeImage.walnut - image-$(CONFIG_ACADIA) += cuImage.acadia - image-$(CONFIG_MAGICBOXV1) += cuImage.magicboxv1 -+image-$(CONFIG_MAGICBOXV2) += cuImage.magicboxv2 - - # Board ports in arch/powerpc/platform/44x/Kconfig - image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony ---- a/arch/powerpc/platforms/40x/Kconfig -+++ b/arch/powerpc/platforms/40x/Kconfig -@@ -59,6 +59,16 @@ config MAGICBOXV1 - help - This option enables support for the Magicbox v1 board. - -+config MAGICBOXV2 -+ bool "Magicbox v2" -+ depends on 40x -+ default n -+ select PPC40x_SIMPLE -+ select 405EP -+ select PCI -+ help -+ This option enables support for the Magicbox v2 board. -+ - config MAKALU - bool "Makalu" - depends on 40x ---- a/arch/powerpc/platforms/40x/ppc40x_simple.c -+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c -@@ -52,7 +52,8 @@ machine_device_initcall(ppc40x_simple, p - */ - static char *board[] __initdata = { - "amcc,acadia", -- "magicboxv1" -+ "magicboxv1", -+ "magicboxv2", - }; - - static int __init ppc40x_probe(void) diff --git a/target/linux/ppc40x/patches/007-openrb-light.patch b/target/linux/ppc40x/patches/007-openrb-light.patch deleted file mode 100644 index 0d4f5e57ac..0000000000 --- a/target/linux/ppc40x/patches/007-openrb-light.patch +++ /dev/null @@ -1,376 +0,0 @@ ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -70,7 +70,8 @@ src-plat := of.c cuboot-52xx.c cuboot-82 - cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ - cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ - virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ -- cuboot-acadia.c cuboot-magicboxv1.c cuboot-magicboxv2.c -+ cuboot-acadia.c cuboot-magicboxv1.c cuboot-magicboxv2.c \ -+ cuboot-openrb-light.c - src-boot := $(src-wlib) $(src-plat) empty.c - - src-boot := $(addprefix $(obj)/, $(src-boot)) -@@ -216,6 +217,7 @@ image-$(CONFIG_WALNUT) += treeImage.wa - image-$(CONFIG_ACADIA) += cuImage.acadia - image-$(CONFIG_MAGICBOXV1) += cuImage.magicboxv1 - image-$(CONFIG_MAGICBOXV2) += cuImage.magicboxv2 -+image-$(CONFIG_OPENRB_LIGHT) += cuImage.openrb-light - - # Board ports in arch/powerpc/platform/44x/Kconfig - image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony ---- a/arch/powerpc/platforms/40x/Kconfig -+++ b/arch/powerpc/platforms/40x/Kconfig -@@ -79,6 +79,16 @@ config MAKALU - help - This option enables support for the AMCC PPC405EX board. - -+config OPENRB_LIGHT -+ bool "OpenRB Light" -+ depends on 40x -+ default n -+ select PPC40x_SIMPLE -+ select 405EP -+ select PCI -+ help -+ This option enables support for the OpenRB Light board. -+ - #config REDWOOD_5 - # bool "Redwood-5" - # depends on 40x ---- a/arch/powerpc/platforms/40x/ppc40x_simple.c -+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c -@@ -54,6 +54,7 @@ static char *board[] __initdata = { - "amcc,acadia", - "magicboxv1", - "magicboxv2", -+ "openrb,light", - }; - - static int __init ppc40x_probe(void) ---- /dev/null -+++ b/arch/powerpc/boot/cuboot-openrb-light.c -@@ -0,0 +1,69 @@ -+/* -+ * Old U-boot compatibility for OpenRB Light board -+ * -+ * Author: Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "ops.h" -+#include "io.h" -+#include "dcr.h" -+#include "stdio.h" -+#include "4xx.h" -+#include "44x.h" -+#include "cuboot.h" -+ -+#define TARGET_4xx -+#define TARGET_405EP -+#include "ppcboot.h" -+ -+static bd_t bd; -+ -+static void fixup_cf_card(void) -+{ -+#define DCRN_CPC0_PCI_BASE 0xf9 -+#define CF_CS0_BASE 0xff100000 -+#define CF_CS1_BASE 0xff200000 -+ -+ /* Turn on PerWE instead of PCIsomething */ -+ mtdcr(DCRN_CPC0_PCI_BASE, -+ mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27)); -+ -+ /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+ /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+#undef DCRN_CPC0_PCI_BASE -+#undef CF_CS0_BASE -+#undef CF_CS1_BASE -+} -+ -+static void openrb_light_fixups(void) -+{ -+ fixup_cf_card(); -+ ibm405ep_fixup_clocks(33333000); -+ ibm4xx_sdram_fixup_memsize(); -+ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); -+} -+ -+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, -+ unsigned long r6, unsigned long r7) -+{ -+ CUBOOT_INIT(); -+ platform_ops.fixups = openrb_light_fixups; -+ platform_ops.exit = ibm40x_dbcr_reset; -+ fdt_init(_dtb_start); -+ serial_console_init(); -+} -+ ---- /dev/null -+++ b/arch/powerpc/boot/dts/openrb-light.dts -@@ -0,0 +1,252 @@ -+/* -+ * Device Tree Source for OpenRB Light board -+ * -+ * Copyright 2009 Gabor Juhos -+ * -+ * Based on magicboxv2.dts -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ */ -+ -+/dts-v1/; -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ model = "openrb,light"; -+ compatible = "openrb,light"; -+ dcr-parent = <&{/cpus/cpu@0}>; -+ -+ aliases { -+ ethernet0 = &EMAC0; -+ serial0 = &UART0; -+ serial1 = &UART1; -+ }; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ device_type = "cpu"; -+ model = "PowerPC,405EP"; -+ reg = <0x00000000>; -+ clock-frequency = <0xbebc200>; /* Filled in by zImage */ -+ timebase-frequency = <0>; /* Filled in by zImage */ -+ i-cache-line-size = <20>; -+ d-cache-line-size = <20>; -+ i-cache-size = <4000>; -+ d-cache-size = <4000>; -+ dcr-controller; -+ dcr-access-method = "native"; -+ }; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */ -+ }; -+ -+ UIC0: interrupt-controller { -+ compatible = "ibm,uic"; -+ interrupt-controller; -+ cell-index = <0>; -+ dcr-reg = <0x0c0 0x009>; -+ #address-cells = <0>; -+ #size-cells = <0>; -+ #interrupt-cells = <2>; -+ }; -+ -+ plb { -+ compatible = "ibm,plb3"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ SDRAM0: memory-controller { -+ compatible = "ibm,sdram-405ep"; -+ dcr-reg = <0x010 0x002>; -+ }; -+ -+ MAL: mcmal { -+ compatible = "ibm,mcmal-405ep", "ibm,mcmal"; -+ dcr-reg = <0x180 0x062>; -+ num-tx-chans = <4>; -+ num-rx-chans = <2>; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xb 0x4 /* TXEOB */ -+ 0xc 0x4 /* RXEOB */ -+ 0xa 0x4 /* SERR */ -+ 0xd 0x4 /* TXDE */ -+ 0xe 0x4 /* RXDE */>; -+ }; -+ -+ OPB0: opb { -+ compatible = "ibm,opb-405ep", "ibm,opb"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0xef600000 0xef600000 0x00a00000>; -+ dcr-reg = <0x0a0 0x005>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ UART0: serial@ef600300 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600300 0x00000008>; -+ virtual-reg = <0xef600300>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x0 0x4>; -+ }; -+ -+ UART1: serial@ef600400 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600400 0x00000008>; -+ virtual-reg = <0xef600400>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x1 0x4>; -+ }; -+ -+ IIC: i2c@ef600500 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "ibm,iic-405ep", "ibm,iic"; -+ reg = <0xef600500 0x00000011>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x2 0x4>; -+ -+ eeprom@50 { -+ compatible = "at24,24c16"; -+ reg = <0x50>; -+ }; -+ }; -+ -+ GPIO0: gpio-controller@ef600700 { -+ compatible = "ibm,ppc4xx-gpio"; -+ reg = <0xef600700 0x00000020>; -+ #gpio-cells = <2>; -+ gpio-controller; -+ }; -+ -+ EMAC0: ethernet@ef600800 { -+ linux,network-index = <0x0>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xf 0x4 /* Ethernet */ -+ 0x9 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600800 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <0>; -+ mal-rx-channel = <0>; -+ cell-index = <0>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ phy-mode = "mii"; -+ phy-map = <0x00000000>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ user { -+ label = "openrb:green:user"; -+ gpios = <&GPIO0 2 1>; -+ }; -+ }; -+ }; -+ -+ EBC0: ebc { -+ compatible = "ibm,ebc-405ep", "ibm,ebc"; -+ dcr-reg = <0x012 0x002>; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ /* The ranges property is supplied by the bootwrapper -+ * and is based on the firmware's configuration of the -+ * EBC bridge -+ */ -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ cf_card@ff100000 { -+ compatible = "magicbox-cf", "pata-magicbox-cf"; -+ reg = <0x00000000 0xff100000 0x00001000 -+ 0x00000000 0xff200000 0x00001000>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >; -+ }; -+ -+ nor_flash@ff800000 { -+ compatible = "cfi-flash"; -+ bank-width = <2>; -+ reg = <0x00000000 0xff800000 0x00800000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ partition@0 { -+ label = "linux"; -+ reg = <0x0 0x120000>; -+ }; -+ partition@120000 { -+ label = "rootfs"; -+ reg = <0x120000 0x6a0000>; -+ }; -+ partition@7c0000 { -+ label = "u-boot"; -+ reg = <0x7c0000 0x30000>; -+ read-only; -+ }; -+ }; -+ }; -+ -+ PCI0: pci@ec000000 { -+ device_type = "pci"; -+ #interrupt-cells = <1>; -+ #size-cells = <2>; -+ #address-cells = <3>; -+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; -+ primary; -+ reg = <0xeec00000 0x00000008 /* Config space access */ -+ 0xeed80000 0x00000004 /* IACK */ -+ 0xeed80000 0x00000004 /* Special cycle */ -+ 0xef480000 0x00000040>; /* Internal registers */ -+ -+ /* Outbound ranges, one memory and one IO, -+ * later cannot be changed. Chip supports a second -+ * IO range but we don't use it for now -+ */ -+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 -+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; -+ -+ /* Inbound 2GB range starting at 0 */ -+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; -+ -+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>; -+ interrupt-map = < -+ /* IDSEL 1 */ -+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 -+ -+ /* IDSEL 2 */ -+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 -+ -+ /* IDSEL 3 */ -+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 -+ -+ /* IDSEL 4 */ -+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 -+ >; -+ }; -+ }; -+ -+ chosen { -+ linux,stdout-path = "/plb/opb/serial@ef600300"; -+ }; -+}; diff --git a/target/linux/ppc40x/patches/008-openrb-medium.patch b/target/linux/ppc40x/patches/008-openrb-medium.patch deleted file mode 100644 index b69d9099e4..0000000000 --- a/target/linux/ppc40x/patches/008-openrb-medium.patch +++ /dev/null @@ -1,404 +0,0 @@ ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -71,7 +71,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82 - cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ - virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c cuboot-magicboxv1.c cuboot-magicboxv2.c \ -- cuboot-openrb-light.c -+ cuboot-openrb-light.c cuboot-openrb-medium.c - src-boot := $(src-wlib) $(src-plat) empty.c - - src-boot := $(addprefix $(obj)/, $(src-boot)) -@@ -218,6 +218,7 @@ image-$(CONFIG_ACADIA) += cuImage.acad - image-$(CONFIG_MAGICBOXV1) += cuImage.magicboxv1 - image-$(CONFIG_MAGICBOXV2) += cuImage.magicboxv2 - image-$(CONFIG_OPENRB_LIGHT) += cuImage.openrb-light -+image-$(CONFIG_OPENRB_MEDIUM) += cuImage.openrb-medium - - # Board ports in arch/powerpc/platform/44x/Kconfig - image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony ---- a/arch/powerpc/platforms/40x/Kconfig -+++ b/arch/powerpc/platforms/40x/Kconfig -@@ -89,6 +89,16 @@ config OPENRB_LIGHT - help - This option enables support for the OpenRB Light board. - -+config OPENRB_MEDIUM -+ bool "OpenRB Medium" -+ depends on 40x -+ default n -+ select PPC40x_SIMPLE -+ select 405EP -+ select PCI -+ help -+ This option enables support for the OpenRB Medium board. -+ - #config REDWOOD_5 - # bool "Redwood-5" - # depends on 40x ---- a/arch/powerpc/platforms/40x/ppc40x_simple.c -+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c -@@ -55,6 +55,7 @@ static char *board[] __initdata = { - "magicboxv1", - "magicboxv2", - "openrb,light", -+ "openrb,medium", - }; - - static int __init ppc40x_probe(void) ---- /dev/null -+++ b/arch/powerpc/boot/cuboot-openrb-medium.c -@@ -0,0 +1,69 @@ -+/* -+ * Old U-boot compatibility for OpenRB Medium -+ * -+ * Author: Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "ops.h" -+#include "io.h" -+#include "dcr.h" -+#include "stdio.h" -+#include "4xx.h" -+#include "44x.h" -+#include "cuboot.h" -+ -+#define TARGET_4xx -+#define TARGET_405EP -+#include "ppcboot.h" -+ -+static bd_t bd; -+ -+static void fixup_cf_card(void) -+{ -+#define DCRN_CPC0_PCI_BASE 0xf9 -+#define CF_CS0_BASE 0xff100000 -+#define CF_CS1_BASE 0xff200000 -+ -+ /* Turn on PerWE instead of PCIsomething */ -+ mtdcr(DCRN_CPC0_PCI_BASE, -+ mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27)); -+ -+ /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+ /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+#undef DCRN_CPC0_PCI_BASE -+#undef CF_CS0_BASE -+#undef CF_CS1_BASE -+} -+ -+static void openrb_light_fixups(void) -+{ -+ fixup_cf_card(); -+ ibm405ep_fixup_clocks(33333000); -+ ibm4xx_sdram_fixup_memsize(); -+ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); -+} -+ -+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, -+ unsigned long r6, unsigned long r7) -+{ -+ CUBOOT_INIT(); -+ platform_ops.fixups = openrb_light_fixups; -+ platform_ops.exit = ibm40x_dbcr_reset; -+ fdt_init(_dtb_start); -+ serial_console_init(); -+} -+ ---- /dev/null -+++ b/arch/powerpc/boot/dts/openrb-medium.dts -@@ -0,0 +1,281 @@ -+/* -+ * Device Tree Source for OpenRB Medium board -+ * -+ * Copyright 2008 Imre Kaloz -+ * Copyright 2009 Gabor Juhos -+ * -+ * Based on walnut.dts -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ */ -+ -+/dts-v1/; -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ model = "openrb,medium"; -+ compatible = "openrb,medium"; -+ dcr-parent = <&{/cpus/cpu@0}>; -+ -+ aliases { -+ ethernet0 = &EMAC0; -+ ethernet1 = &EMAC1; -+ serial0 = &UART0; -+ serial1 = &UART1; -+ }; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ device_type = "cpu"; -+ model = "PowerPC,405EP"; -+ reg = <0x00000000>; -+ clock-frequency = <0xbebc200>; /* Filled in by zImage */ -+ timebase-frequency = <0>; /* Filled in by zImage */ -+ i-cache-line-size = <20>; -+ d-cache-line-size = <20>; -+ i-cache-size = <4000>; -+ d-cache-size = <4000>; -+ dcr-controller; -+ dcr-access-method = "native"; -+ }; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */ -+ }; -+ -+ UIC0: interrupt-controller { -+ compatible = "ibm,uic"; -+ interrupt-controller; -+ cell-index = <0>; -+ dcr-reg = <0x0c0 0x009>; -+ #address-cells = <0>; -+ #size-cells = <0>; -+ #interrupt-cells = <2>; -+ }; -+ -+ plb { -+ compatible = "ibm,plb3"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ SDRAM0: memory-controller { -+ compatible = "ibm,sdram-405ep"; -+ dcr-reg = <0x010 0x002>; -+ }; -+ -+ MAL: mcmal { -+ compatible = "ibm,mcmal-405ep", "ibm,mcmal"; -+ dcr-reg = <0x180 0x062>; -+ num-tx-chans = <4>; -+ num-rx-chans = <2>; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xb 0x4 /* TXEOB */ -+ 0xc 0x4 /* RXEOB */ -+ 0xa 0x4 /* SERR */ -+ 0xd 0x4 /* TXDE */ -+ 0xe 0x4 /* RXDE */>; -+ }; -+ -+ POB0: opb { -+ compatible = "ibm,opb-405ep", "ibm,opb"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0xef600000 0xef600000 0x00a00000>; -+ dcr-reg = <0x0a0 0x005>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ UART0: serial@ef600300 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600300 0x00000008>; -+ virtual-reg = <0xef600300>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x0 0x4>; -+ }; -+ -+ UART1: serial@ef600400 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600400 0x00000008>; -+ virtual-reg = <0xef600400>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x1 0x4>; -+ }; -+ -+ IIC: i2c@ef600500 { -+ compatible = "ibm,iic-405ep", "ibm,iic"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0xef600500 0x00000011>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x2 0x4>; -+ -+ dtt@48 { -+ compatible = "national,lm75"; -+ reg = <0x48>; -+ }; -+ -+ eeprom@50 { -+ compatible = "at24,24c16"; -+ reg = <0x50>; -+ }; -+ }; -+ -+ GPIO0: gpio-controller@ef600700 { -+ compatible = "ibm,ppc4xx-gpio"; -+ reg = <0xef600700 0x00000020>; -+ #gpio-cells = <2>; -+ gpio-controller; -+ }; -+ -+ EMAC0: ethernet@ef600800 { -+ linux,network-index = <0x0>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xf 0x4 /* Ethernet */ -+ 0x9 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600800 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <0>; -+ mal-rx-channel = <0>; -+ cell-index = <0>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ phy-mode = "mii"; -+ phy-map = <0x00000000>; -+ }; -+ -+ EMAC1: ethernet@ef600900 { -+ linux,network-index = <0x1>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0x11 0x4 /* Ethernet */ -+ 0x09 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600900 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <2>; -+ mal-rx-channel = <1>; -+ cell-index = <1>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ mdio-device = <&EMAC0>; -+ phy-mode = "mii"; -+ phy-map = <0x00000001>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ user { -+ label = "magicbox:red:user"; -+ gpios = <&GPIO0 2 1>; -+ }; -+ }; -+ }; -+ -+ EBC0: ebc { -+ compatible = "ibm,ebc-405ep", "ibm,ebc"; -+ dcr-reg = <0x012 0x002>; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ /* The ranges property is supplied by the bootwrapper -+ * and is based on the firmware's configuration of the -+ * EBC bridge -+ */ -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ cf_card@ff100000 { -+ compatible = "magicbox-cf", "pata-magicbox-cf"; -+ reg = <0x00000000 0xff100000 0x00001000 -+ 0x00000000 0xff200000 0x00001000>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >; -+ }; -+ -+ nor_flash@ffc00000 { -+ compatible = "cfi-flash"; -+ bank-width = <2>; -+ reg = <0x00000000 0xffc00000 0x00400000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ partition@0 { -+ label = "linux"; -+ reg = <0x0 0x120000>; -+ }; -+ partition@120000 { -+ label = "rootfs"; -+ reg = <0x120000 0x2a0000>; -+ }; -+ partition@3c0000 { -+ label = "u-boot"; -+ reg = <0x3c0000 0x30000>; -+ read-only; -+ }; -+ }; -+ }; -+ -+ PCI0: pci@ec000000 { -+ device_type = "pci"; -+ #interrupt-cells = <1>; -+ #size-cells = <2>; -+ #address-cells = <3>; -+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; -+ primary; -+ reg = <0xeec00000 0x00000008 /* Config space access */ -+ 0xeed80000 0x00000004 /* IACK */ -+ 0xeed80000 0x00000004 /* Special cycle */ -+ 0xef480000 0x00000040>; /* Internal registers */ -+ -+ /* Outbound ranges, one memory and one IO, -+ * later cannot be changed. Chip supports a second -+ * IO range but we don't use it for now -+ */ -+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 -+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; -+ -+ /* Inbound 2GB range starting at 0 */ -+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; -+ -+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>; -+ interrupt-map = < -+ /* IDSEL 1 */ -+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 -+ -+ /* IDSEL 2 */ -+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 -+ -+ /* IDSEL 3 */ -+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 -+ -+ /* IDSEL 4 */ -+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 -+ >; -+ }; -+ }; -+ -+ chosen { -+ linux,stdout-path = "/plb/opb/serial@ef600300"; -+ }; -+}; diff --git a/target/linux/ppc40x/patches/100-magicbox-ide-driver.patch b/target/linux/ppc40x/patches/100-magicbox-ide-driver.patch deleted file mode 100644 index eca26a9e4a..0000000000 --- a/target/linux/ppc40x/patches/100-magicbox-ide-driver.patch +++ /dev/null @@ -1,359 +0,0 @@ ---- a/drivers/ide/Kconfig -+++ b/drivers/ide/Kconfig -@@ -712,6 +712,11 @@ config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - default "128" - depends on BLK_DEV_IDE_AU1XXX - -+config BLK_DEV_IDE_MAGICBOX -+ tristate "Magicbox CF card support" -+ depends on MAGICBOXV2 || OPENRB_LIGHT -+ select IDE_XFER_MODE -+ - config BLK_DEV_IDE_TX4938 - tristate "TX4938 internal IDE support" - depends on SOC_TX4938 ---- a/drivers/ide/Makefile -+++ b/drivers/ide/Makefile -@@ -110,6 +110,7 @@ obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapi - obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o - - obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o -+obj-$(CONFIG_BLK_DEV_IDE_MAGICBOX) += magicbox_ide.o - - obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o - obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o ---- /dev/null -+++ b/drivers/ide/magicbox_ide.c -@@ -0,0 +1,332 @@ -+/* -+ * IDE driver for the MagicBox 2.0 onboard CompactFlash slot. -+ * -+ * Copyright (C) 2009 Gabor Juhos -+ * -+ * Based on the original driver by Wojtek Kaniewski -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRV_DESC "IDE driver for Magicbox 2.0 onboard CF slot" -+#define DRV_NAME "magicbox_cf" -+ -+static u8 magicbox_ide_inb(unsigned long port) -+{ -+ return (u8) (readw((void __iomem *) port) >> 8) & 0xff; -+} -+ -+static void magicbox_ide_outb(u8 value, unsigned long port) -+{ -+ writew(value << 8, (void __iomem *) port); -+} -+ -+static inline void magicbox_ide_insw(unsigned long port, void *addr, u32 count) -+{ -+ u16 *ptr; -+ -+ for (ptr = addr; count--; ptr++) -+ *ptr = readw((void __iomem *) port); -+} -+ -+static inline void magicbox_ide_insl(unsigned long port, void *addr, u32 count) -+{ -+ u32 *ptr; -+ -+ for (ptr = addr; count--; ptr++) -+ *ptr = readl((void __iomem *) port); -+} -+ -+static inline void magicbox_ide_outsw(unsigned long port, void *addr, -+ u32 count) -+{ -+ u16 *ptr; -+ -+ for (ptr = addr; count--; ptr++) -+ writew(*ptr, (void __iomem *) port); -+} -+ -+static inline void magicbox_ide_outsl(unsigned long port, void *addr, -+ u32 count) -+{ -+ u32 *ptr; -+ -+ for (ptr = addr; count--; ptr++) -+ writel(*ptr, (void __iomem *) port); -+} -+ -+static void magicbox_ide_exec_command(ide_hwif_t *hwif, u8 cmd) -+{ -+ magicbox_ide_outb(cmd, hwif->io_ports.command_addr); -+} -+ -+static u8 magicbox_ide_read_status(ide_hwif_t *hwif) -+{ -+ return magicbox_ide_inb(hwif->io_ports.status_addr); -+} -+ -+static u8 magicbox_ide_read_altstatus(ide_hwif_t *hwif) -+{ -+ return magicbox_ide_inb(hwif->io_ports.ctl_addr); -+} -+ -+static void magicbox_ide_tf_load(ide_drive_t *drive, ide_task_t *task) -+{ -+ struct ide_io_ports *io_ports = &drive->hwif->io_ports; -+ struct ide_taskfile *tf = &task->tf; -+ u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; -+ -+ if (task->tf_flags & IDE_TFLAG_FLAGGED) -+ HIHI = 0xFF; -+ -+ if (task->tf_flags & IDE_TFLAG_OUT_DATA) -+ writel((tf->hob_data << 8) | tf->data, -+ (void __iomem *) io_ports->data_addr); -+ -+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) -+ magicbox_ide_outb(tf->hob_feature, io_ports->feature_addr); -+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) -+ magicbox_ide_outb(tf->hob_nsect, io_ports->nsect_addr); -+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) -+ magicbox_ide_outb(tf->hob_lbal, io_ports->lbal_addr); -+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) -+ magicbox_ide_outb(tf->hob_lbam, io_ports->lbam_addr); -+ if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) -+ magicbox_ide_outb(tf->hob_lbah, io_ports->lbah_addr); -+ -+ if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) -+ magicbox_ide_outb(tf->feature, io_ports->feature_addr); -+ if (task->tf_flags & IDE_TFLAG_OUT_NSECT) -+ magicbox_ide_outb(tf->nsect, io_ports->nsect_addr); -+ if (task->tf_flags & IDE_TFLAG_OUT_LBAL) -+ magicbox_ide_outb(tf->lbal, io_ports->lbal_addr); -+ if (task->tf_flags & IDE_TFLAG_OUT_LBAM) -+ magicbox_ide_outb(tf->lbam, io_ports->lbam_addr); -+ if (task->tf_flags & IDE_TFLAG_OUT_LBAH) -+ magicbox_ide_outb(tf->lbah, io_ports->lbah_addr); -+ -+ if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) -+ magicbox_ide_outb((tf->device & HIHI) | drive->select, -+ io_ports->device_addr); -+} -+ -+static void magicbox_ide_tf_read(ide_drive_t *drive, ide_task_t *task) -+{ -+ struct ide_io_ports *io_ports = &drive->hwif->io_ports; -+ struct ide_taskfile *tf = &task->tf; -+ -+ if (task->tf_flags & IDE_TFLAG_IN_DATA) { -+ u16 data = (u16) readl((void __iomem *) io_ports->data_addr); -+ -+ tf->data = data & 0xff; -+ tf->hob_data = (data >> 8) & 0xff; -+ } -+ -+ /* be sure we're looking at the low order bits */ -+ magicbox_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); -+ -+ if (task->tf_flags & IDE_TFLAG_IN_NSECT) -+ tf->nsect = magicbox_ide_inb(io_ports->nsect_addr); -+ if (task->tf_flags & IDE_TFLAG_IN_LBAL) -+ tf->lbal = magicbox_ide_inb(io_ports->lbal_addr); -+ if (task->tf_flags & IDE_TFLAG_IN_LBAM) -+ tf->lbam = magicbox_ide_inb(io_ports->lbam_addr); -+ if (task->tf_flags & IDE_TFLAG_IN_LBAH) -+ tf->lbah = magicbox_ide_inb(io_ports->lbah_addr); -+ if (task->tf_flags & IDE_TFLAG_IN_DEVICE) -+ tf->device = magicbox_ide_inb(io_ports->device_addr); -+ -+ if (task->tf_flags & IDE_TFLAG_LBA48) { -+ magicbox_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); -+ -+ if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) -+ tf->hob_feature = magicbox_ide_inb(io_ports->feature_addr); -+ if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) -+ tf->hob_nsect = magicbox_ide_inb(io_ports->nsect_addr); -+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) -+ tf->hob_lbal = magicbox_ide_inb(io_ports->lbal_addr); -+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) -+ tf->hob_lbam = magicbox_ide_inb(io_ports->lbam_addr); -+ if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) -+ tf->hob_lbah = magicbox_ide_inb(io_ports->lbah_addr); -+ } -+} -+ -+static void magicbox_ide_input_data(ide_drive_t *drive, struct request *rq, -+ void *buf, unsigned int len) -+{ -+ unsigned long port = drive->hwif->io_ports.data_addr; -+ -+ len++; -+ -+ if (drive->io_32bit) { -+ magicbox_ide_insl(port, buf, len / 4); -+ -+ if ((len & 3) >= 2) -+ magicbox_ide_insw(port, (u8 *)buf + (len & ~3), 1); -+ } else -+ magicbox_ide_insw(port, buf, len / 2); -+} -+ -+static void magicbox_ide_output_data(ide_drive_t *drive, struct request *rq, -+ void *buf, unsigned int len) -+{ -+ unsigned long port = drive->hwif->io_ports.data_addr; -+ -+ len++; -+ -+ if (drive->io_32bit) { -+ magicbox_ide_outsl(port, buf, len / 4); -+ -+ if ((len & 3) >= 2) -+ magicbox_ide_outsw(port, (u8 *)buf + (len & ~3), 1); -+ } else -+ magicbox_ide_outsw(port, buf, len / 2); -+} -+ -+static void magicbox_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) -+{ -+} -+ -+static u8 magicbox_ide_cable_detect(ide_hwif_t *hwif) -+{ -+ return ATA_CBL_PATA40; -+} -+ -+static const struct ide_tp_ops magicbox_ide_tp_ops = { -+ .exec_command = magicbox_ide_exec_command, -+ .read_status = magicbox_ide_read_status, -+ .read_altstatus = magicbox_ide_read_altstatus, -+ -+ .set_irq = ide_set_irq, -+ .tf_load = magicbox_ide_tf_load, -+ .tf_read = magicbox_ide_tf_read, -+ -+ .input_data = magicbox_ide_input_data, -+ .output_data = magicbox_ide_output_data, -+}; -+ -+static const struct ide_port_ops magicbox_ide_port_ops = { -+ .set_pio_mode = magicbox_ide_set_pio_mode, -+ .cable_detect = magicbox_ide_cable_detect, -+}; -+ -+static const struct ide_port_info magicbox_ide_port_info = { -+ .name = DRV_NAME, -+ .chipset = ide_generic, -+ .tp_ops = &magicbox_ide_tp_ops, -+ .port_ops = &magicbox_ide_port_ops, -+ .host_flags = IDE_HFLAG_SINGLE | -+ IDE_HFLAG_NO_DMA | -+ IDE_HFLAG_MMIO | -+ IDE_HFLAG_UNMASK_IRQS, -+ .pio_mask = ATA_PIO4, -+}; -+ -+static inline void magicbox_ide_setup_hw(hw_regs_t *hw, u16 __iomem *base, -+ u16 __iomem *ctrl, int irq) -+{ -+ unsigned long port = (unsigned long) base; -+ int i; -+ -+ memset(hw, 0, sizeof(*hw)); -+ for (i = 0; i <= 7; i++) -+ hw->io_ports_array[i] = port + i * 2; -+ -+ /* -+ * the IDE control register is at ATA address 6, -+ * with CS1 active instead of CS0 -+ */ -+ hw->io_ports.ctl_addr = (unsigned long)ctrl + (6 * 2); -+ -+ hw->irq = irq; -+ hw->chipset = ide_generic; -+ hw->ack_intr = NULL; -+} -+ -+static int __devinit magicbox_ide_of_probe(struct of_device *op, -+ const struct of_device_id *match) -+{ -+ hw_regs_t hw; -+ hw_regs_t *hws[] = { &hw, NULL, NULL, NULL }; -+ struct ide_host *host; -+ u16 __iomem *base; -+ u16 __iomem *ctrl; -+ int irq; -+ int ret = 0; -+ -+ irq = irq_of_parse_and_map(op->node, 0); -+ if (irq < 0) { -+ dev_err(&op->dev, "invalid irq\n"); -+ ret = -EINVAL; -+ goto err_exit; -+ } -+ -+ base = of_iomap(op->node, 0); -+ if (base == NULL) { -+ ret = -ENOMEM; -+ goto err_exit; -+ } -+ -+ ctrl = of_iomap(op->node, 1); -+ if (ctrl == NULL) { -+ ret = -ENOMEM; -+ goto err_unmap_base; -+ } -+ -+ magicbox_ide_setup_hw(&hw, base, ctrl, irq); -+ -+ hw.dev = &op->dev; -+ -+ ret = ide_host_add(&magicbox_ide_port_info, hws, &host); -+ if (ret) -+ goto err_unmap_ctrl; -+ -+ dev_set_drvdata(&op->dev, host); -+ -+ return 0; -+ -+ err_unmap_ctrl: -+ iounmap(ctrl); -+ err_unmap_base: -+ iounmap(base); -+ err_exit: -+ return ret; -+} -+ -+static struct of_device_id magicbox_ide_of_match[] = { -+ { .compatible = "magicbox-cf", }, -+ {}, -+}; -+ -+static struct of_platform_driver magicbox_ide_of_platform_driver = { -+ .owner = THIS_MODULE, -+ .name = DRV_NAME, -+ .match_table = magicbox_ide_of_match, -+ .probe = magicbox_ide_of_probe, -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init magicbox_ide_init(void) -+{ -+ return of_register_platform_driver(&magicbox_ide_of_platform_driver); -+} -+ -+module_init(magicbox_ide_init); -+ -+MODULE_DESCRIPTION(DRV_DESC); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_LICENSE("GPL v2"); -+MODULE_DEVICE_TABLE(of, magicbox_ide_of_match); diff --git a/target/linux/ppc40x/patches/101-pata-magicbox-cf-driver.patch b/target/linux/ppc40x/patches/101-pata-magicbox-cf-driver.patch deleted file mode 100644 index 48d2d44ee6..0000000000 --- a/target/linux/ppc40x/patches/101-pata-magicbox-cf-driver.patch +++ /dev/null @@ -1,438 +0,0 @@ ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -697,6 +697,16 @@ config PATA_IXP4XX_CF - - If unsure, say N. - -+config PATA_MAGICBOX_CF -+ tristate "Magicbox/OpenRB Compact lash support" -+ depends on MAGICBOXV2 || OPENRB_LIGHT -+ help -+ This option enables supoort for a Compatc Flash connected on -+ the ppc405ep expansion bus. This driver had been written for -+ the Magicbox v2 and OpenRB boards. -+ -+ If unsure, say N. -+ - config PATA_SCC - tristate "Toshiba's Cell Reference Set IDE support" - depends on PCI && PPC_CELLEB ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -48,6 +48,7 @@ obj-$(CONFIG_PATA_OPTI) += pata_opti.o - obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o - obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o - obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o -+obj-$(CONFIG_PATA_MAGICBOX_CF) += pata_magicbox_cf.o - obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o - obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o - obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o ---- /dev/null -+++ b/drivers/ata/pata_magicbox_cf.c -@@ -0,0 +1,406 @@ -+/* -+ * PATA/CompactFlash driver for the MagicBox v2/OpenRB boards. -+ * -+ * Copyright (C) 2009 Gabor Juhos -+ * -+ * Based on the IDE driver by Wojtek Kaniewski -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRV_DESC "PATA/CompactFlash driver for Magicbox/OpenRB boards" -+#define DRV_NAME "pata_magicbox_cf" -+#define DRV_VERSION "0.1.0" -+ -+#define MAGICBOX_CF_REG_CMD (2 * ATA_REG_CMD) -+#define MAGICBOX_CF_REG_DATA (2 * ATA_REG_DATA) -+#define MAGICBOX_CF_REG_ERR (2 * ATA_REG_ERR) -+#define MAGICBOX_CF_REG_FEATURE (2 * ATA_REG_FEATURE) -+#define MAGICBOX_CF_REG_NSECT (2 * ATA_REG_NSECT) -+#define MAGICBOX_CF_REG_LBAL (2 * ATA_REG_LBAL) -+#define MAGICBOX_CF_REG_LBAM (2 * ATA_REG_LBAM) -+#define MAGICBOX_CF_REG_LBAH (2 * ATA_REG_LBAH) -+#define MAGICBOX_CF_REG_DEVICE (2 * ATA_REG_DEVICE) -+#define MAGICBOX_CF_REG_STATUS (2 * ATA_REG_STATUS) -+#define MAGICBOX_CF_REG_ALTSTATUS (2 * 6) -+#define MAGICBOX_CF_REG_CTL (2 * 6) -+ -+#define MAGICBOX_CF_MAXPORTS 1 -+ -+struct magicbox_cf_info { -+ void __iomem *base; -+ void __iomem *ctrl; -+}; -+ -+static inline u8 magicbox_cf_inb(void __iomem *port) -+{ -+ return (u8) (readw(port) >> 8) & 0xff; -+} -+ -+static inline void magicbox_cf_outb(void __iomem *port, u8 value) -+{ -+ writew(value << 8, port); -+} -+ -+static int magicbox_cf_set_mode(struct ata_link *link, -+ struct ata_device **error) -+{ -+ struct ata_device *dev; -+ -+ ata_link_for_each_dev(dev, link) { -+ if (ata_dev_enabled(dev)) { -+ ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n"); -+ dev->pio_mode = XFER_PIO_0; -+ dev->xfer_mode = XFER_PIO_0; -+ dev->xfer_shift = ATA_SHIFT_PIO; -+ dev->flags |= ATA_DFLAG_PIO; -+ } -+ } -+ -+ return 0; -+} -+ -+static void magicbox_cf_exec_command(struct ata_port *ap, -+ const struct ata_taskfile *tf) -+{ -+ DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); -+ -+ magicbox_cf_outb(ap->ioaddr.command_addr, tf->command); -+ ata_sff_pause(ap); -+} -+ -+static u8 magicbox_cf_check_status(struct ata_port *ap) -+{ -+ u8 status; -+ -+ status = magicbox_cf_inb(ap->ioaddr.status_addr); -+ -+ DPRINTK("ata%u: status 0x%X, from %p\n", ap->print_id, status, -+ ap->ioaddr.status_addr); -+ -+ return status; -+} -+ -+static u8 magicbox_cf_check_altstatus(struct ata_port *ap) -+{ -+ u8 altstatus; -+ -+ altstatus = magicbox_cf_inb(ap->ioaddr.altstatus_addr); -+ -+ DPRINTK("ata%u: altstatus 0x%X, from %p\n", ap->print_id, -+ altstatus, ap->ioaddr.altstatus_addr); -+ -+ return altstatus; -+} -+ -+static void magicbox_cf_dev_select(struct ata_port *ap, unsigned int device) -+{ -+ /* Nothing to do. We are supporting one device only. */ -+} -+ -+static void magicbox_cf_tf_load(struct ata_port *ap, -+ const struct ata_taskfile *tf) -+{ -+ struct ata_ioports *ioaddr = &ap->ioaddr; -+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; -+ -+ if (tf->ctl != ap->last_ctl) { -+ magicbox_cf_outb(ioaddr->ctl_addr, tf->ctl); -+ ap->last_ctl = tf->ctl; -+ ata_wait_idle(ap); -+ } -+ -+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { -+ magicbox_cf_outb(ioaddr->feature_addr, tf->hob_feature); -+ magicbox_cf_outb(ioaddr->nsect_addr, tf->hob_nsect); -+ magicbox_cf_outb(ioaddr->lbal_addr, tf->hob_lbal); -+ magicbox_cf_outb(ioaddr->lbam_addr, tf->hob_lbam); -+ magicbox_cf_outb(ioaddr->lbah_addr, tf->hob_lbah); -+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", -+ tf->hob_feature, -+ tf->hob_nsect, -+ tf->hob_lbal, -+ tf->hob_lbam, -+ tf->hob_lbah); -+ } -+ -+ if (is_addr) { -+ magicbox_cf_outb(ioaddr->feature_addr, tf->feature); -+ magicbox_cf_outb(ioaddr->nsect_addr, tf->nsect); -+ magicbox_cf_outb(ioaddr->lbal_addr, tf->lbal); -+ magicbox_cf_outb(ioaddr->lbam_addr, tf->lbam); -+ magicbox_cf_outb(ioaddr->lbah_addr, tf->lbah); -+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", -+ tf->feature, -+ tf->nsect, -+ tf->lbal, -+ tf->lbam, -+ tf->lbah); -+ } -+ -+ if (tf->flags & ATA_TFLAG_DEVICE) { -+ magicbox_cf_outb(ioaddr->device_addr, tf->device); -+ VPRINTK("device 0x%X\n", tf->device); -+ } -+ -+ ata_wait_idle(ap); -+} -+ -+static void magicbox_cf_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -+{ -+ struct ata_ioports *ioaddr = &ap->ioaddr; -+ -+ tf->command = magicbox_cf_inb(ap->ioaddr.status_addr); -+ tf->feature = magicbox_cf_inb(ioaddr->error_addr); -+ tf->nsect = magicbox_cf_inb(ioaddr->nsect_addr); -+ tf->lbal = magicbox_cf_inb(ioaddr->lbal_addr); -+ tf->lbam = magicbox_cf_inb(ioaddr->lbam_addr); -+ tf->lbah = magicbox_cf_inb(ioaddr->lbah_addr); -+ tf->device = magicbox_cf_inb(ioaddr->device_addr); -+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", -+ tf->feature, -+ tf->nsect, -+ tf->lbal, -+ tf->lbam, -+ tf->lbah); -+ -+ if (tf->flags & ATA_TFLAG_LBA48) { -+ magicbox_cf_outb(ioaddr->ctl_addr, tf->ctl | ATA_HOB); -+ tf->hob_feature = magicbox_cf_inb(ioaddr->error_addr); -+ tf->hob_nsect = magicbox_cf_inb(ioaddr->nsect_addr); -+ tf->hob_lbal = magicbox_cf_inb(ioaddr->lbal_addr); -+ tf->hob_lbam = magicbox_cf_inb(ioaddr->lbam_addr); -+ tf->hob_lbah = magicbox_cf_inb(ioaddr->lbah_addr); -+ magicbox_cf_outb(ioaddr->ctl_addr, tf->ctl); -+ ap->last_ctl = tf->ctl; -+ VPRINTK("hob: feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", -+ tf->feature, -+ tf->nsect, -+ tf->lbal, -+ tf->lbam, -+ tf->lbah); -+ } -+} -+ -+static unsigned int magicbox_cf_data_xfer(struct ata_device *dev, -+ unsigned char *buf, -+ unsigned int buflen, int rw) -+{ -+ struct ata_port *ap = dev->link->ap; -+ unsigned int words = buflen >> 1; -+ unsigned int i; -+ u16 *buf16 = (u16 *) buf; -+ void __iomem *mmio = ap->ioaddr.data_addr; -+ -+ /* Transfer multiple of 2 bytes */ -+ if (rw == READ) -+ for (i = 0; i < words; i++) -+ buf16[i] = readw(mmio); -+ else -+ for (i = 0; i < words; i++) -+ writew(buf16[i], mmio); -+ -+ /* Transfer trailing 1 byte, if any. */ -+ if (unlikely(buflen & 0x01)) { -+ u16 align_buf[1] = { 0 }; -+ unsigned char *trailing_buf = buf + buflen - 1; -+ -+ if (rw == READ) { -+ align_buf[0] = readw(mmio); -+ memcpy(trailing_buf, align_buf, 1); -+ } else { -+ memcpy(align_buf, trailing_buf, 1); -+ writew(align_buf[0], mmio); -+ } -+ words++; -+ } -+ -+ return words << 1; -+} -+ -+static u8 magicbox_cf_irq_on(struct ata_port *ap) -+{ -+ /* Nothing to do. */ -+ return 0; -+} -+ -+static void magicbox_cf_irq_clear(struct ata_port *ap) -+{ -+ /* Nothing to do. */ -+} -+ -+static struct ata_port_operations magicbox_cf_port_ops = { -+ .inherits = &ata_sff_port_ops, -+ -+ .cable_detect = ata_cable_40wire, -+ .set_mode = magicbox_cf_set_mode, -+ -+ .sff_exec_command = magicbox_cf_exec_command, -+ .sff_check_status = magicbox_cf_check_status, -+ .sff_check_altstatus = magicbox_cf_check_altstatus, -+ .sff_dev_select = magicbox_cf_dev_select, -+ .sff_tf_load = magicbox_cf_tf_load, -+ .sff_tf_read = magicbox_cf_tf_read, -+ .sff_data_xfer = magicbox_cf_data_xfer, -+ -+ .sff_irq_on = magicbox_cf_irq_on, -+ .sff_irq_clear = magicbox_cf_irq_clear, -+ -+ .port_start = ATA_OP_NULL, -+}; -+ -+static struct scsi_host_template magicbox_cf_sht = { -+ ATA_PIO_SHT(DRV_NAME), -+}; -+ -+static inline void magicbox_cf_setup_port(struct ata_host *host) -+{ -+ struct magicbox_cf_info *info = host->private_data; -+ struct ata_port *ap; -+ -+ ap = host->ports[0]; -+ -+ ap->ops = &magicbox_cf_port_ops; -+ ap->pio_mask = ATA_PIO4; -+ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI; -+ -+ ap->ioaddr.cmd_addr = info->base + MAGICBOX_CF_REG_CMD; -+ ap->ioaddr.data_addr = info->base + MAGICBOX_CF_REG_DATA; -+ ap->ioaddr.error_addr = info->base + MAGICBOX_CF_REG_ERR; -+ ap->ioaddr.feature_addr = info->base + MAGICBOX_CF_REG_FEATURE; -+ ap->ioaddr.nsect_addr = info->base + MAGICBOX_CF_REG_NSECT; -+ ap->ioaddr.lbal_addr = info->base + MAGICBOX_CF_REG_LBAL; -+ ap->ioaddr.lbam_addr = info->base + MAGICBOX_CF_REG_LBAM; -+ ap->ioaddr.lbah_addr = info->base + MAGICBOX_CF_REG_LBAH; -+ ap->ioaddr.device_addr = info->base + MAGICBOX_CF_REG_DEVICE; -+ ap->ioaddr.status_addr = info->base + MAGICBOX_CF_REG_STATUS; -+ ap->ioaddr.command_addr = info->base + MAGICBOX_CF_REG_CMD; -+ -+ ap->ioaddr.altstatus_addr = info->ctrl + MAGICBOX_CF_REG_ALTSTATUS; -+ ap->ioaddr.ctl_addr = info->ctrl + MAGICBOX_CF_REG_CTL; -+ -+ ata_port_desc(ap, "cmd 0x%p ctl 0x%p", ap->ioaddr.cmd_addr, -+ ap->ioaddr.ctl_addr); -+} -+ -+static int __devinit magicbox_cf_of_probe(struct of_device *op, -+ const struct of_device_id *match) -+{ -+ struct magicbox_cf_info *info; -+ struct ata_host *host; -+ int irq; -+ int ret = 0; -+ -+ info = kzalloc(sizeof(struct magicbox_cf_info), GFP_KERNEL); -+ if (info == NULL) { -+ ret = -ENOMEM; -+ goto err_exit; -+ } -+ -+ irq = irq_of_parse_and_map(op->node, 0); -+ if (irq < 0) { -+ dev_err(&op->dev, "invalid irq\n"); -+ ret = -EINVAL; -+ goto err_free_info; -+ } -+ -+ info->base = of_iomap(op->node, 0); -+ if (info->base == NULL) { -+ ret = -ENOMEM; -+ goto err_free_info; -+ } -+ -+ info->ctrl = of_iomap(op->node, 1); -+ if (info->ctrl == NULL) { -+ ret = -ENOMEM; -+ goto err_unmap_base; -+ } -+ -+ host = ata_host_alloc(&op->dev, MAGICBOX_CF_MAXPORTS); -+ if (host == NULL) { -+ ret = -ENOMEM; -+ goto err_unmap_ctrl; -+ } -+ -+ host->private_data = info; -+ magicbox_cf_setup_port(host); -+ -+ ret = ata_host_activate(host, irq, ata_sff_interrupt, -+ IRQF_TRIGGER_RISING, &magicbox_cf_sht); -+ if (ret) -+ goto err_unmap_ctrl; -+ -+ dev_set_drvdata(&op->dev, host); -+ return 0; -+ -+ err_unmap_ctrl: -+ iounmap(info->ctrl); -+ err_unmap_base: -+ iounmap(info->base); -+ err_free_info: -+ kfree(info); -+ err_exit: -+ return ret; -+} -+ -+static __devexit int magicbox_cf_of_remove(struct of_device *op) -+{ -+ struct ata_host *host = dev_get_drvdata(&op->dev); -+ struct magicbox_cf_info *info = host->private_data; -+ -+ ata_host_detach(host); -+ iounmap(info->ctrl); -+ iounmap(info->base); -+ kfree(info); -+ -+ return 0; -+} -+ -+static struct of_device_id magicbox_cf_of_match[] = { -+ { .compatible = "pata-magicbox-cf", }, -+ {}, -+}; -+ -+static struct of_platform_driver magicbox_cf_of_platform_driver = { -+ .owner = THIS_MODULE, -+ .name = DRV_NAME, -+ .match_table = magicbox_cf_of_match, -+ .probe = magicbox_cf_of_probe, -+ .remove = __devexit_p(magicbox_cf_of_remove), -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init magicbox_cf_init(void) -+{ -+ return of_register_platform_driver(&magicbox_cf_of_platform_driver); -+} -+ -+static void __exit magicbox_cf_exit(void) -+{ -+ of_unregister_platform_driver(&magicbox_cf_of_platform_driver); -+} -+ -+module_init(magicbox_cf_init); -+module_exit(magicbox_cf_exit); -+ -+MODULE_DESCRIPTION(DRV_DESC); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_LICENSE("GPL v2"); -+MODULE_VERSION(DRV_VERSION); -+MODULE_DEVICE_TABLE(of, magicbox_cf_of_match);