From: INAGAKI Hiroshi Date: Wed, 27 Jun 2018 05:51:25 +0000 (+0900) Subject: ramips: add switch port index for I-O DATA WN-GX300GR X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7775802eb9bc9bbabc0eeaddb4d7ecdf68f88947;p=openwrt%2Fstaging%2Fjow.git ramips: add switch port index for I-O DATA WN-GX300GR WN-GX300GR has 5x RJ45 ports (port 0-4), and these ports are orderd on the device as follows: 4 3 2 1 0 1-4: lan 0: wan Signed-off-by: INAGAKI Hiroshi --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index d2c15f8f46..76b6fe9f50 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -195,7 +195,6 @@ ramips_setup_interfaces() gl-mt300n|\ gl-mt750|\ hg255d|\ - iodata,wn-gx300gr|\ jhr-n805r|\ jhr-n825r|\ jhr-n926r|\ @@ -228,7 +227,8 @@ ramips_setup_interfaces() "1:lan:3" "2:lan:4" "3:lan:1" "4:lan:2" "0:wan" "6@eth0" ;; dir-860l-b1|\ - elecom,wrc-1167ghbk2-s) + elecom,wrc-1167ghbk2-s|\ + iodata,wn-gx300gr) ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;;