From: L. D. Pinney Date: Sat, 22 Jul 2017 01:15:56 +0000 (+0800) Subject: ramips: add support for the GnuBee Personal Cloud One X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=77645ffcd9ad;p=openwrt%2Fstaging%2Fdangole.git ramips: add support for the GnuBee Personal Cloud One The GnuBee Personal Cloud One crowdfunded on https://www.crowdsupply.com It is a low-cost, low-power, network-attached storage device. Specifications: - SoC: MediaTek MT7621AT - RAM: DDR3 512 MB - Flash: 32 MB - Six SATA ports for 2.5" Drives - One micro SDcard - One USB 3.0 - Two USB 2.0 - Gigabit Ethernet: 1 x WAN and 1 x LAN - UART 3.5mm Audio Jack or 3 pin header - 57600 8N1 - Four GPIOs available on a pin header Flash instructions: The GnuBee Personal Cloud One ships with libreCMC installed. libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt. As such one can upgrade using the webinterface or sysupgrade. Das U-Boot has multiple options for recovery or updates including : - USB - http - tftp Signed-off-by: L. D. Pinney [use switchdev led trigger, all interfaces are in vlan1; rename leds according to board.d setting; remove ge2 group from the pinmux, this group doesn't exist in the driver] Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds old mode 100755 new mode 100644 index 8ea464516c..8678a77796 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -183,6 +183,10 @@ fonera20n) set_usb_led "$board:orange:usb" set_wifi_led "$board:orange:wifi" ;; +gb-pc1) + ucidef_set_led_switch "lan1" "lan1" "$board:green:lan1" "switch0" "0x01" + ucidef_set_led_switch "lan2" "lan2" "$board:green:lan2" "switch0" "0x10" + ;; gl-mt300a|\ gl-mt300n|\ gl-mt750) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 2d8a90cd3e..ee769b5a0f 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -186,6 +186,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;; + gb-pc1) + ucidef_add_switch "switch0" \ + "0:lan" "4:lan" "6@eth0" + ;; gl-mt300n-v2) ucidef_add_switch "switch0" \ "1:lan" "0:wan" "6@eth0" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 3933357aad..f5c0e835c0 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -77,6 +77,7 @@ get_status_led() { dir-620-a1|\ dir-620-d1|\ dwr-512-b|\ + gb-pc1|\ hpm|\ hw550-3g|\ mac1200rv2|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 0fd871a5d6..685ba070da 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -208,6 +208,9 @@ ramips_board_detect() { *"FreeStation5") name="freestation5" ;; + *"GB-PC1") + name="gb-pc1" + ;; *"GL-MT300A") name="gl-mt300a" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 830e129115..b087d993b7 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -59,6 +59,7 @@ platform_check_image() { firewrt|\ fonera20n|\ freestation5|\ + gb-pc1|\ gl-mt300a|\ gl-mt300n|\ gl-mt750|\ diff --git a/target/linux/ramips/dts/GB-PC1.dts b/target/linux/ramips/dts/GB-PC1.dts new file mode 100644 index 0000000000..df7caa9100 --- /dev/null +++ b/target/linux/ramips/dts/GB-PC1.dts @@ -0,0 +1,120 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "gnubee,gb-pc1", "mediatek,mt7621-soc"; + model = "GB-PC1"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus: palmbus@1E000000 { + i2c@900 { + status = "okay"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + system { + label = "gb-pc1:green:system"; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + + status { + label = "gb-pc1:green:status"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "gb-pc1:green:lan1"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "gb-pc1:green:lan2"; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&sdhci { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii2", "uart3"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index bf0e292286..a67facb83b 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -75,6 +75,14 @@ define Device/firewrt endef TARGET_DEVICES += firewrt +define Device/gb-pc1 + DTS := GB-PC1 + DEVICE_TITLE := GnuBee Personal Cloud One + DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 + IMAGE_SIZE := $(ralink_default_fw_size_32M) +endef +TARGET_DEVICES += gb-pc1 + define Device/hc5962 DTS := HC5962 BLOCKSIZE := 128k