From: Hans de Goede Date: Sun, 13 May 2018 07:24:28 +0000 (+0200) Subject: ASoC: Intel: bytcr_rt5640: Enable jack detection X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7732310839f61658162967cb43e044311196edf2;p=openwrt%2Fstaging%2Fblogic.git ASoC: Intel: bytcr_rt5640: Enable jack detection Add code to support setting jack-detect parameters through quirks and extend the existing DMI quirk table entries for the Asus T100TA and the Dell Venue 8 Pro 5830 to enable jack detection. Tested-by: Hans de Goede Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index d0706ea3b04f..3cdaf87480ef 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -46,19 +47,46 @@ enum { BYT_RT5640_IN3_MAP, }; -#define BYT_RT5640_MAP(quirk) ((quirk) & GENMASK(7, 0)) -#define BYT_RT5640_MONO_SPEAKER BIT(17) -#define BYT_RT5640_DIFF_MIC BIT(18) /* defaut is single-ended */ -#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */ -#define BYT_RT5640_SSP0_AIF1 BIT(20) -#define BYT_RT5640_SSP0_AIF2 BIT(21) -#define BYT_RT5640_MCLK_EN BIT(22) -#define BYT_RT5640_MCLK_25MHZ BIT(23) +enum { + BYT_RT5640_JD_SRC_GPIO1 = (RT5640_JD_SRC_GPIO1 << 4), + BYT_RT5640_JD_SRC_JD1_IN4P = (RT5640_JD_SRC_JD1_IN4P << 4), + BYT_RT5640_JD_SRC_JD2_IN4N = (RT5640_JD_SRC_JD2_IN4N << 4), + BYT_RT5640_JD_SRC_GPIO2 = (RT5640_JD_SRC_GPIO2 << 4), + BYT_RT5640_JD_SRC_GPIO3 = (RT5640_JD_SRC_GPIO3 << 4), + BYT_RT5640_JD_SRC_GPIO4 = (RT5640_JD_SRC_GPIO4 << 4), +}; + +enum { + BYT_RT5640_OVCD_TH_600UA = (6 << 8), + BYT_RT5640_OVCD_TH_1500UA = (15 << 8), + BYT_RT5640_OVCD_TH_2000UA = (20 << 8), +}; + +enum { + BYT_RT5640_OVCD_SF_0P5 = (RT5640_OVCD_SF_0P5 << 13), + BYT_RT5640_OVCD_SF_0P75 = (RT5640_OVCD_SF_0P75 << 13), + BYT_RT5640_OVCD_SF_1P0 = (RT5640_OVCD_SF_1P0 << 13), + BYT_RT5640_OVCD_SF_1P5 = (RT5640_OVCD_SF_1P5 << 13), +}; -/* in-diff or dmic-pin + terminating empty entry */ -#define MAX_NO_PROPS 2 +#define BYT_RT5640_MAP(quirk) ((quirk) & GENMASK(3, 0)) +#define BYT_RT5640_JDSRC(quirk) (((quirk) & GENMASK(7, 4)) >> 4) +#define BYT_RT5640_OVCD_TH(quirk) (((quirk) & GENMASK(12, 8)) >> 8) +#define BYT_RT5640_OVCD_SF(quirk) (((quirk) & GENMASK(14, 13)) >> 13) +#define BYT_RT5640_JD_NOT_INV BIT(16) +#define BYT_RT5640_MONO_SPEAKER BIT(17) +#define BYT_RT5640_DIFF_MIC BIT(18) /* default is single-ended */ +#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */ +#define BYT_RT5640_SSP0_AIF1 BIT(20) +#define BYT_RT5640_SSP0_AIF2 BIT(21) +#define BYT_RT5640_MCLK_EN BIT(22) +#define BYT_RT5640_MCLK_25MHZ BIT(23) + +/* in-diff or dmic-pin + jdsrc + ovcd-th + -sf + jd-inv + terminating entry */ +#define MAX_NO_PROPS 6 struct byt_rt5640_private { + struct snd_soc_jack jack; struct clk *mclk; }; static bool is_bytcr; @@ -95,6 +123,16 @@ static void log_quirks(struct device *dev) dev_err(dev, "quirk map 0x%x is not supported, microphone input will not work\n", map); break; } + if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) { + dev_info(dev, "quirk realtek,jack-detect-source %ld\n", + BYT_RT5640_JDSRC(byt_rt5640_quirk)); + dev_info(dev, "quirk realtek,over-current-threshold-microamp %ld\n", + BYT_RT5640_OVCD_TH(byt_rt5640_quirk) * 100); + dev_info(dev, "quirk realtek,over-current-scale-factor %ld\n", + BYT_RT5640_OVCD_SF(byt_rt5640_quirk)); + } + if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV) + dev_info(dev, "quirk JD_NOT_INV enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_MONO_SPEAKER) dev_info(dev, "quirk MONO_SPEAKER enabled\n"); if (byt_rt5640_quirk & BYT_RT5640_DIFF_MIC) @@ -330,6 +368,17 @@ static const struct snd_kcontrol_new byt_rt5640_controls[] = { SOC_DAPM_PIN_SWITCH("Speaker"), }; +static struct snd_soc_jack_pin rt5640_pins[] = { + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -353,6 +402,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | BYT_RT5640_MCLK_EN), }, { @@ -374,6 +426,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"), }, .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | BYT_RT5640_MONO_SPEAKER | BYT_RT5640_MCLK_EN), }, @@ -463,6 +518,23 @@ static int byt_rt5640_add_codec_device_props(const char *i2c_dev_name) break; } + if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) { + props[cnt++] = PROPERTY_ENTRY_U32( + "realtek,jack-detect-source", + BYT_RT5640_JDSRC(byt_rt5640_quirk)); + + props[cnt++] = PROPERTY_ENTRY_U32( + "realtek,over-current-threshold-microamp", + BYT_RT5640_OVCD_TH(byt_rt5640_quirk) * 100); + + props[cnt++] = PROPERTY_ENTRY_U32( + "realtek,over-current-scale-factor", + BYT_RT5640_OVCD_SF(byt_rt5640_quirk)); + } + + if (byt_rt5640_quirk & BYT_RT5640_JD_NOT_INV) + props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,jack-detect-not-inverted"); + ret = device_add_properties(i2c_dev, props); put_device(i2c_dev); @@ -480,6 +552,11 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) card->dapm.idle_bias_off = true; + /* Start with RC clk for jack-detect (we disable MCLK below) */ + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) + snd_soc_component_update_bits(component, RT5640_GLB_CLK, + RT5640_SCLK_SRC_MASK, RT5640_SCLK_SRC_RCCLK); + rt5640_sel_asrc_clk_src(component, RT5640_DA_STEREO_FILTER | RT5640_DA_MONO_L_FILTER | @@ -573,11 +650,27 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) else ret = clk_set_rate(priv->mclk, 19200000); - if (ret) + if (ret) { dev_err(card->dev, "unable to set MCLK rate\n"); + return ret; + } } - return ret; + if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) { + ret = snd_soc_card_jack_new(card, "Headset", + SND_JACK_HEADSET | SND_JACK_BTN_0, + &priv->jack, rt5640_pins, + ARRAY_SIZE(rt5640_pins)); + if (ret) { + dev_err(card->dev, "Jack creation failed %d\n", ret); + return ret; + } + snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, + KEY_PLAYPAUSE); + snd_soc_component_set_jack(component, &priv->jack, NULL); + } + + return 0; } static const struct snd_soc_pcm_stream byt_rt5640_dai_params = { @@ -719,6 +812,47 @@ static struct snd_soc_dai_link byt_rt5640_dais[] = { }; /* SoC card */ +static char byt_rt5640_codec_name[SND_ACPI_I2C_ID_LEN]; +static char byt_rt5640_codec_aif_name[12]; /* = "rt5640-aif[1|2]" */ +static char byt_rt5640_cpu_dai_name[10]; /* = "ssp[0|2]-port" */ + +static int byt_rt5640_suspend(struct snd_soc_card *card) +{ + struct snd_soc_component *component; + + if (!BYT_RT5640_JDSRC(byt_rt5640_quirk)) + return 0; + + list_for_each_entry(component, &card->component_dev_list, card_list) { + if (!strcmp(component->name, byt_rt5640_codec_name)) { + dev_dbg(component->dev, "disabling jack detect before suspend\n"); + snd_soc_component_set_jack(component, NULL, NULL); + break; + } + } + + return 0; +} + +static int byt_rt5640_resume(struct snd_soc_card *card) +{ + struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card); + struct snd_soc_component *component; + + if (!BYT_RT5640_JDSRC(byt_rt5640_quirk)) + return 0; + + list_for_each_entry(component, &card->component_dev_list, card_list) { + if (!strcmp(component->name, byt_rt5640_codec_name)) { + dev_dbg(component->dev, "re-enabling jack detect after resume\n"); + snd_soc_component_set_jack(component, &priv->jack, NULL); + break; + } + } + + return 0; +} + static struct snd_soc_card byt_rt5640_card = { .name = "bytcr-rt5640", .owner = THIS_MODULE, @@ -729,12 +863,10 @@ static struct snd_soc_card byt_rt5640_card = { .dapm_routes = byt_rt5640_audio_map, .num_dapm_routes = ARRAY_SIZE(byt_rt5640_audio_map), .fully_routed = true, + .suspend_pre = byt_rt5640_suspend, + .resume_post = byt_rt5640_resume, }; -static char byt_rt5640_codec_name[SND_ACPI_I2C_ID_LEN]; -static char byt_rt5640_codec_aif_name[12]; /* = "rt5640-aif[1|2]" */ -static char byt_rt5640_cpu_dai_name[10]; /* = "ssp[0|2]-port" */ - static bool is_valleyview(void) { static const struct x86_cpu_id cpu_ids[] = {