From: Denys Vlasenko Date: Thu, 26 Feb 2015 22:40:27 +0000 (-0800) Subject: x86/asm/entry/64: Always allocate a complete "struct pt_regs" on the kernel stack X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=76f5df43cab5e765c0bd42289103e8f625813ae1;p=openwrt%2Fstaging%2Fblogic.git x86/asm/entry/64: Always allocate a complete "struct pt_regs" on the kernel stack The 64-bit entry code was using six stack slots less by not saving/restoring registers which are callee-preserved according to the C ABI, and was not allocating space for them. Only when syscalls needed a complete "struct pt_regs" was the complete area allocated and filled in. As an additional twist, on interrupt entry a "slightly less truncated pt_regs" trick is used, to make nested interrupt stacks easier to unwind. This proved to be a source of significant obfuscation and subtle bugs. For example, 'stub_fork' had to pop the return address, extend the struct, save registers, and push return address back. Ugly. 'ia32_ptregs_common' pops return address and "returns" via jmp insn, throwing a wrench into CPU return stack cache. This patch changes the code to always allocate a complete "struct pt_regs" on the kernel stack. The saving of registers is still done lazily. "Partial pt_regs" trick on interrupt stack is retained. Macros which manipulate "struct pt_regs" on stack are reworked: - ALLOC_PT_GPREGS_ON_STACK allocates the structure. - SAVE_C_REGS saves to it those registers which are clobbered by C code. - SAVE_EXTRA_REGS saves to it all other registers. - Corresponding RESTORE_* and REMOVE_PT_GPREGS_FROM_STACK macros reverse it. 'ia32_ptregs_common', 'stub_fork' and friends lost their ugly dance with the return pointer. LOAD_ARGS32 in ia32entry.S now uses symbolic stack offsets instead of magic numbers. 'error_entry' and 'save_paranoid' now use SAVE_C_REGS + SAVE_EXTRA_REGS instead of having it open-coded yet again. Patch was run-tested: 64-bit executables, 32-bit executables, strace works. Timing tests did not show measurable difference in 32-bit and 64-bit syscalls. Signed-off-by: Denys Vlasenko Signed-off-by: Andy Lutomirski Cc: Alexei Starovoitov Cc: Borislav Petkov Cc: Frederic Weisbecker Cc: H. Peter Anvin Cc: Kees Cook Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Will Drewry Link: http://lkml.kernel.org/r/1423778052-21038-2-git-send-email-dvlasenk@redhat.com Link: http://lkml.kernel.org/r/b89763d354aa23e670b9bdf3a40ae320320a7c2e.1424989793.git.luto@amacapital.net Signed-off-by: Ingo Molnar --- diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 156ebcab4ada..f4bed4971673 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -62,12 +62,12 @@ */ .macro LOAD_ARGS32 offset, _r9=0 .if \_r9 - movl \offset+16(%rsp),%r9d + movl \offset+R9(%rsp),%r9d .endif - movl \offset+40(%rsp),%ecx - movl \offset+48(%rsp),%edx - movl \offset+56(%rsp),%esi - movl \offset+64(%rsp),%edi + movl \offset+RCX(%rsp),%ecx + movl \offset+RDX(%rsp),%edx + movl \offset+RSI(%rsp),%esi + movl \offset+RDI(%rsp),%edi movl %eax,%eax /* zero extension */ .endm @@ -144,7 +144,8 @@ ENTRY(ia32_sysenter_target) CFI_REL_OFFSET rip,0 pushq_cfi %rax cld - SAVE_ARGS 0,1,0 + ALLOC_PT_GPREGS_ON_STACK + SAVE_C_REGS_EXCEPT_R891011 /* no need to do an access_ok check here because rbp has been 32bit zero extended */ ASM_STAC @@ -182,7 +183,8 @@ sysexit_from_sys_call: andl $~0x200,EFLAGS-ARGOFFSET(%rsp) movl RIP-ARGOFFSET(%rsp),%edx /* User %eip */ CFI_REGISTER rip,rdx - RESTORE_ARGS 0,24,0,0,0,0 + RESTORE_RSI_RDI + REMOVE_PT_GPREGS_FROM_STACK 3*8 xorq %r8,%r8 xorq %r9,%r9 xorq %r10,%r10 @@ -256,13 +258,13 @@ sysenter_tracesys: testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jz sysenter_auditsys #endif - SAVE_REST + SAVE_EXTRA_REGS CLEAR_RREGS movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ - RESTORE_REST + RESTORE_EXTRA_REGS cmpq $(IA32_NR_syscalls-1),%rax ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */ jmp sysenter_do_call @@ -304,7 +306,8 @@ ENTRY(ia32_cstar_target) * disabled irqs and here we enable it straight after entry: */ ENABLE_INTERRUPTS(CLBR_NONE) - SAVE_ARGS 8,0,0 + ALLOC_PT_GPREGS_ON_STACK 8 + SAVE_C_REGS_EXCEPT_RCX_R891011 movl %eax,%eax /* zero extension */ movq %rax,ORIG_RAX-ARGOFFSET(%rsp) movq %rcx,RIP-ARGOFFSET(%rsp) @@ -341,7 +344,7 @@ cstar_dispatch: jnz sysretl_audit sysretl_from_sys_call: andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) - RESTORE_ARGS 0,-ARG_SKIP,0,0,0 + RESTORE_RSI_RDI_RDX movl RIP-ARGOFFSET(%rsp),%ecx CFI_REGISTER rip,rcx movl EFLAGS-ARGOFFSET(%rsp),%r11d @@ -372,13 +375,13 @@ cstar_tracesys: jz cstar_auditsys #endif xchgl %r9d,%ebp - SAVE_REST + SAVE_EXTRA_REGS CLEAR_RREGS 0, r9 movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET, 1 /* reload args from stack in case ptrace changed it */ - RESTORE_REST + RESTORE_EXTRA_REGS xchgl %ebp,%r9d cmpq $(IA32_NR_syscalls-1),%rax ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */ @@ -433,7 +436,8 @@ ENTRY(ia32_syscall) cld /* note the registers are not zero extended to the sf. this could be a problem. */ - SAVE_ARGS 0,1,0 + ALLOC_PT_GPREGS_ON_STACK + SAVE_C_REGS_EXCEPT_R891011 orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET) testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz ia32_tracesys @@ -446,16 +450,16 @@ ia32_sysret: movq %rax,RAX-ARGOFFSET(%rsp) ia32_ret_from_sys_call: CLEAR_RREGS -ARGOFFSET - jmp int_ret_from_sys_call + jmp int_ret_from_sys_call -ia32_tracesys: - SAVE_REST +ia32_tracesys: + SAVE_EXTRA_REGS CLEAR_RREGS movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ - RESTORE_REST + RESTORE_EXTRA_REGS cmpq $(IA32_NR_syscalls-1),%rax ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */ jmp ia32_do_call @@ -492,7 +496,6 @@ GLOBAL(stub32_clone) ALIGN ia32_ptregs_common: - popq %r11 CFI_ENDPROC CFI_STARTPROC32 simple CFI_SIGNAL_FRAME @@ -507,9 +510,9 @@ ia32_ptregs_common: /* CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/ CFI_REL_OFFSET rsp,RSP-ARGOFFSET /* CFI_REL_OFFSET ss,SS-ARGOFFSET*/ - SAVE_REST + SAVE_EXTRA_REGS 8 call *%rax - RESTORE_REST - jmp ia32_sysret /* misbalances the return cache */ + RESTORE_EXTRA_REGS 8 + ret CFI_ENDPROC END(ia32_ptregs_common) diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h index 3c711f2ab236..38356476b131 100644 --- a/arch/x86/include/asm/calling.h +++ b/arch/x86/include/asm/calling.h @@ -55,143 +55,137 @@ For 32-bit we have the following conventions - kernel is built with * for assembly code: */ -#define R15 0 -#define R14 8 -#define R13 16 -#define R12 24 -#define RBP 32 -#define RBX 40 - -/* arguments: interrupts/non tracing syscalls only save up to here: */ -#define R11 48 -#define R10 56 -#define R9 64 -#define R8 72 -#define RAX 80 -#define RCX 88 -#define RDX 96 -#define RSI 104 -#define RDI 112 -#define ORIG_RAX 120 /* + error_code */ -/* end of arguments */ - -/* cpu exception frame or undefined in case of fast syscall: */ -#define RIP 128 -#define CS 136 -#define EFLAGS 144 -#define RSP 152 -#define SS 160 - -#define ARGOFFSET R11 - - .macro SAVE_ARGS addskip=0, save_rcx=1, save_r891011=1, rax_enosys=0 - subq $9*8+\addskip, %rsp - CFI_ADJUST_CFA_OFFSET 9*8+\addskip - movq_cfi rdi, 8*8 - movq_cfi rsi, 7*8 - movq_cfi rdx, 6*8 - - .if \save_rcx - movq_cfi rcx, 5*8 - .endif +/* The layout forms the "struct pt_regs" on the stack: */ +/* + * C ABI says these regs are callee-preserved. They aren't saved on kernel entry + * unless syscall needs a complete, fully filled "struct pt_regs". + */ +#define R15 0*8 +#define R14 1*8 +#define R13 2*8 +#define R12 3*8 +#define RBP 4*8 +#define RBX 5*8 +/* These regs are callee-clobbered. Always saved on kernel entry. */ +#define R11 6*8 +#define R10 7*8 +#define R9 8*8 +#define R8 9*8 +#define RAX 10*8 +#define RCX 11*8 +#define RDX 12*8 +#define RSI 13*8 +#define RDI 14*8 +/* + * On syscall entry, this is syscall#. On CPU exception, this is error code. + * On hw interrupt, it's IRQ number: + */ +#define ORIG_RAX 15*8 +/* Return frame for iretq */ +#define RIP 16*8 +#define CS 17*8 +#define EFLAGS 18*8 +#define RSP 19*8 +#define SS 20*8 + +#define ARGOFFSET 0 + + .macro ALLOC_PT_GPREGS_ON_STACK addskip=0 + subq $15*8+\addskip, %rsp + CFI_ADJUST_CFA_OFFSET 15*8+\addskip + .endm - .if \rax_enosys - movq $-ENOSYS, 4*8(%rsp) - .else - movq_cfi rax, 4*8 + .macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8plus=1 + .if \r8plus + movq_cfi r11, 6*8+\offset + movq_cfi r10, 7*8+\offset + movq_cfi r9, 8*8+\offset + movq_cfi r8, 9*8+\offset .endif - - .if \save_r891011 - movq_cfi r8, 3*8 - movq_cfi r9, 2*8 - movq_cfi r10, 1*8 - movq_cfi r11, 0*8 + .if \rax + movq_cfi rax, 10*8+\offset + .endif + .if \rcx + movq_cfi rcx, 11*8+\offset .endif + movq_cfi rdx, 12*8+\offset + movq_cfi rsi, 13*8+\offset + movq_cfi rdi, 14*8+\offset + .endm + .macro SAVE_C_REGS offset=0 + SAVE_C_REGS_HELPER \offset, 1, 1, 1 + .endm + .macro SAVE_C_REGS_EXCEPT_RAX_RCX offset=0 + SAVE_C_REGS_HELPER \offset, 0, 0, 1 + .endm + .macro SAVE_C_REGS_EXCEPT_R891011 + SAVE_C_REGS_HELPER 0, 1, 1, 0 + .endm + .macro SAVE_C_REGS_EXCEPT_RCX_R891011 + SAVE_C_REGS_HELPER 0, 1, 0, 0 + .endm + .macro SAVE_EXTRA_REGS offset=0 + movq_cfi r15, 0*8+\offset + movq_cfi r14, 1*8+\offset + movq_cfi r13, 2*8+\offset + movq_cfi r12, 3*8+\offset + movq_cfi rbp, 4*8+\offset + movq_cfi rbx, 5*8+\offset + .endm + .macro SAVE_EXTRA_REGS_RBP offset=0 + movq_cfi rbp, 4*8+\offset .endm -#define ARG_SKIP (9*8) + .macro RESTORE_EXTRA_REGS offset=0 + movq_cfi_restore 0*8+\offset, r15 + movq_cfi_restore 1*8+\offset, r14 + movq_cfi_restore 2*8+\offset, r13 + movq_cfi_restore 3*8+\offset, r12 + movq_cfi_restore 4*8+\offset, rbp + movq_cfi_restore 5*8+\offset, rbx + .endm - .macro RESTORE_ARGS rstor_rax=1, addskip=0, rstor_rcx=1, rstor_r11=1, \ - rstor_r8910=1, rstor_rdx=1 + .macro RESTORE_C_REGS_HELPER rstor_rax=1, rstor_rcx=1, rstor_r11=1, rstor_r8910=1, rstor_rdx=1 .if \rstor_r11 - movq_cfi_restore 0*8, r11 + movq_cfi_restore 6*8, r11 .endif - .if \rstor_r8910 - movq_cfi_restore 1*8, r10 - movq_cfi_restore 2*8, r9 - movq_cfi_restore 3*8, r8 + movq_cfi_restore 7*8, r10 + movq_cfi_restore 8*8, r9 + movq_cfi_restore 9*8, r8 .endif - .if \rstor_rax - movq_cfi_restore 4*8, rax + movq_cfi_restore 10*8, rax .endif - .if \rstor_rcx - movq_cfi_restore 5*8, rcx + movq_cfi_restore 11*8, rcx .endif - .if \rstor_rdx - movq_cfi_restore 6*8, rdx - .endif - - movq_cfi_restore 7*8, rsi - movq_cfi_restore 8*8, rdi - - .if ARG_SKIP+\addskip > 0 - addq $ARG_SKIP+\addskip, %rsp - CFI_ADJUST_CFA_OFFSET -(ARG_SKIP+\addskip) + movq_cfi_restore 12*8, rdx .endif + movq_cfi_restore 13*8, rsi + movq_cfi_restore 14*8, rdi .endm - - .macro LOAD_ARGS offset, skiprax=0 - movq \offset(%rsp), %r11 - movq \offset+8(%rsp), %r10 - movq \offset+16(%rsp), %r9 - movq \offset+24(%rsp), %r8 - movq \offset+40(%rsp), %rcx - movq \offset+48(%rsp), %rdx - movq \offset+56(%rsp), %rsi - movq \offset+64(%rsp), %rdi - .if \skiprax - .else - movq \offset+72(%rsp), %rax - .endif + .macro RESTORE_C_REGS + RESTORE_C_REGS_HELPER 1,1,1,1,1 .endm - -#define REST_SKIP (6*8) - - .macro SAVE_REST - subq $REST_SKIP, %rsp - CFI_ADJUST_CFA_OFFSET REST_SKIP - movq_cfi rbx, 5*8 - movq_cfi rbp, 4*8 - movq_cfi r12, 3*8 - movq_cfi r13, 2*8 - movq_cfi r14, 1*8 - movq_cfi r15, 0*8 + .macro RESTORE_C_REGS_EXCEPT_RAX + RESTORE_C_REGS_HELPER 0,1,1,1,1 .endm - - .macro RESTORE_REST - movq_cfi_restore 0*8, r15 - movq_cfi_restore 1*8, r14 - movq_cfi_restore 2*8, r13 - movq_cfi_restore 3*8, r12 - movq_cfi_restore 4*8, rbp - movq_cfi_restore 5*8, rbx - addq $REST_SKIP, %rsp - CFI_ADJUST_CFA_OFFSET -(REST_SKIP) + .macro RESTORE_C_REGS_EXCEPT_RCX + RESTORE_C_REGS_HELPER 1,0,1,1,1 .endm - - .macro SAVE_ALL - SAVE_ARGS - SAVE_REST + .macro RESTORE_RSI_RDI + RESTORE_C_REGS_HELPER 0,0,0,0,0 + .endm + .macro RESTORE_RSI_RDI_RDX + RESTORE_C_REGS_HELPER 0,0,0,0,1 .endm - .macro RESTORE_ALL addskip=0 - RESTORE_REST - RESTORE_ARGS 1, \addskip + .macro REMOVE_PT_GPREGS_FROM_STACK addskip=0 + addq $15*8+\addskip, %rsp + CFI_ADJUST_CFA_OFFSET -(15*8+\addskip) .endm .macro icebp diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h index 0a8b519226b8..021bee9b86b6 100644 --- a/arch/x86/include/asm/irqflags.h +++ b/arch/x86/include/asm/irqflags.h @@ -171,9 +171,9 @@ static inline int arch_irqs_disabled(void) #define ARCH_LOCKDEP_SYS_EXIT_IRQ \ TRACE_IRQS_ON; \ sti; \ - SAVE_REST; \ + SAVE_EXTRA_REGS; \ LOCKDEP_SYS_EXIT; \ - RESTORE_REST; \ + RESTORE_EXTRA_REGS; \ cli; \ TRACE_IRQS_OFF; diff --git a/arch/x86/include/uapi/asm/ptrace-abi.h b/arch/x86/include/uapi/asm/ptrace-abi.h index 7b0a55a88851..ad115bf779f3 100644 --- a/arch/x86/include/uapi/asm/ptrace-abi.h +++ b/arch/x86/include/uapi/asm/ptrace-abi.h @@ -49,7 +49,6 @@ #define EFLAGS 144 #define RSP 152 #define SS 160 -#define ARGOFFSET R11 #endif /* __ASSEMBLY__ */ /* top of stack page */ diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index a57b3387ec7d..e8372e08f8c2 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -26,12 +26,6 @@ * Some macro usage: * - CFI macros are used to generate dwarf2 unwind information for better * backtraces. They don't change any code. - * - SAVE_ALL/RESTORE_ALL - Save/restore all registers - * - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify. - * There are unfortunately lots of special cases where some registers - * not touched. The macro is a big mess that should be cleaned up. - * - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS. - * Gives a full stack frame. * - ENTRY/END Define functions in the symbol table. * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack * frame that is otherwise undefined after a SYSCALL @@ -190,9 +184,9 @@ ENDPROC(native_usergs_sysret64) .endm /* - * frame that enables calling into C. + * frame that enables passing a complete pt_regs to a C function. */ - .macro PARTIAL_FRAME start=1 offset=0 + .macro DEFAULT_FRAME start=1 offset=0 XCPT_FRAME \start, ORIG_RAX+\offset-ARGOFFSET CFI_REL_OFFSET rdi, RDI+\offset-ARGOFFSET CFI_REL_OFFSET rsi, RSI+\offset-ARGOFFSET @@ -203,13 +197,6 @@ ENDPROC(native_usergs_sysret64) CFI_REL_OFFSET r9, R9+\offset-ARGOFFSET CFI_REL_OFFSET r10, R10+\offset-ARGOFFSET CFI_REL_OFFSET r11, R11+\offset-ARGOFFSET - .endm - -/* - * frame that enables passing a complete pt_regs to a C function. - */ - .macro DEFAULT_FRAME start=1 offset=0 - PARTIAL_FRAME \start, R11+\offset-R15 CFI_REL_OFFSET rbx, RBX+\offset CFI_REL_OFFSET rbp, RBP+\offset CFI_REL_OFFSET r12, R12+\offset @@ -221,21 +208,8 @@ ENDPROC(native_usergs_sysret64) ENTRY(save_paranoid) XCPT_FRAME 1 RDI+8 cld - movq %rdi, RDI+8(%rsp) - movq %rsi, RSI+8(%rsp) - movq_cfi rdx, RDX+8 - movq_cfi rcx, RCX+8 - movq_cfi rax, RAX+8 - movq %r8, R8+8(%rsp) - movq %r9, R9+8(%rsp) - movq %r10, R10+8(%rsp) - movq %r11, R11+8(%rsp) - movq_cfi rbx, RBX+8 - movq %rbp, RBP+8(%rsp) - movq %r12, R12+8(%rsp) - movq %r13, R13+8(%rsp) - movq %r14, R14+8(%rsp) - movq %r15, R15+8(%rsp) + SAVE_C_REGS 8 + SAVE_EXTRA_REGS 8 movl $1,%ebx movl $MSR_GS_BASE,%ecx rdmsr @@ -264,7 +238,7 @@ ENTRY(ret_from_fork) GET_THREAD_INFO(%rcx) - RESTORE_REST + RESTORE_EXTRA_REGS testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread? jz 1f @@ -276,12 +250,10 @@ ENTRY(ret_from_fork) jmp ret_from_sys_call # go to the SYSRET fastpath 1: - subq $REST_SKIP, %rsp # leave space for volatiles - CFI_ADJUST_CFA_OFFSET REST_SKIP movq %rbp, %rdi call *%rbx movl $0, RAX(%rsp) - RESTORE_REST + RESTORE_EXTRA_REGS jmp int_ret_from_sys_call CFI_ENDPROC END(ret_from_fork) @@ -339,9 +311,11 @@ GLOBAL(system_call_after_swapgs) * and short: */ ENABLE_INTERRUPTS(CLBR_NONE) - SAVE_ARGS 8, 0, rax_enosys=1 + ALLOC_PT_GPREGS_ON_STACK 8 + SAVE_C_REGS_EXCEPT_RAX_RCX + movq $-ENOSYS,RAX-ARGOFFSET(%rsp) movq_cfi rax,(ORIG_RAX-ARGOFFSET) - movq %rcx,RIP-ARGOFFSET(%rsp) + movq %rcx,RIP-ARGOFFSET(%rsp) CFI_REL_OFFSET rip,RIP-ARGOFFSET testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz tracesys @@ -372,9 +346,9 @@ ret_from_sys_call: * sysretq will re-enable interrupts: */ TRACE_IRQS_ON + RESTORE_C_REGS_EXCEPT_RCX movq RIP-ARGOFFSET(%rsp),%rcx CFI_REGISTER rip,rcx - RESTORE_ARGS 1,-ARG_SKIP,0 /*CFI_REGISTER rflags,r11*/ movq PER_CPU_VAR(old_rsp), %rsp USERGS_SYSRET64 @@ -387,16 +361,17 @@ int_ret_from_sys_call_fixup: /* Do syscall tracing */ tracesys: - leaq -REST_SKIP(%rsp), %rdi + movq %rsp, %rdi movq $AUDIT_ARCH_X86_64, %rsi call syscall_trace_enter_phase1 test %rax, %rax jnz tracesys_phase2 /* if needed, run the slow path */ - LOAD_ARGS 0 /* else restore clobbered regs */ + RESTORE_C_REGS_EXCEPT_RAX /* else restore clobbered regs */ + movq ORIG_RAX-ARGOFFSET(%rsp), %rax jmp system_call_fastpath /* and return to the fast path */ tracesys_phase2: - SAVE_REST + SAVE_EXTRA_REGS FIXUP_TOP_OF_STACK %rdi movq %rsp, %rdi movq $AUDIT_ARCH_X86_64, %rsi @@ -408,8 +383,8 @@ tracesys_phase2: * We don't reload %rax because syscall_trace_entry_phase2() returned * the value it wants us to use in the table lookup. */ - LOAD_ARGS ARGOFFSET, 1 - RESTORE_REST + RESTORE_C_REGS_EXCEPT_RAX + RESTORE_EXTRA_REGS #if __SYSCALL_MASK == ~0 cmpq $__NR_syscall_max,%rax #else @@ -460,7 +435,7 @@ int_very_careful: TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) int_check_syscall_exit_work: - SAVE_REST + SAVE_EXTRA_REGS /* Check for syscall exit trace */ testl $_TIF_WORK_SYSCALL_EXIT,%edx jz int_signal @@ -479,7 +454,7 @@ int_signal: call do_notify_resume 1: movl $_TIF_WORK_MASK,%edi int_restore_rest: - RESTORE_REST + RESTORE_EXTRA_REGS DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF jmp int_with_check @@ -489,15 +464,12 @@ END(system_call) .macro FORK_LIKE func ENTRY(stub_\func) CFI_STARTPROC - popq %r11 /* save return address */ - PARTIAL_FRAME 0 - SAVE_REST - pushq %r11 /* put it back on stack */ + DEFAULT_FRAME 0, 8 /* offset 8: return address */ + SAVE_EXTRA_REGS 8 FIXUP_TOP_OF_STACK %r11, 8 - DEFAULT_FRAME 0 8 /* offset 8: return address */ call sys_\func RESTORE_TOP_OF_STACK %r11, 8 - ret $REST_SKIP /* pop extended registers */ + ret CFI_ENDPROC END(stub_\func) .endm @@ -505,7 +477,7 @@ END(stub_\func) .macro FIXED_FRAME label,func ENTRY(\label) CFI_STARTPROC - PARTIAL_FRAME 0 8 /* offset 8: return address */ + DEFAULT_FRAME 0, 8 /* offset 8: return address */ FIXUP_TOP_OF_STACK %r11, 8-ARGOFFSET call \func RESTORE_TOP_OF_STACK %r11, 8-ARGOFFSET @@ -522,12 +494,12 @@ END(\label) ENTRY(stub_execve) CFI_STARTPROC addq $8, %rsp - PARTIAL_FRAME 0 - SAVE_REST + DEFAULT_FRAME 0 + SAVE_EXTRA_REGS FIXUP_TOP_OF_STACK %r11 call sys_execve movq %rax,RAX(%rsp) - RESTORE_REST + RESTORE_EXTRA_REGS jmp int_ret_from_sys_call CFI_ENDPROC END(stub_execve) @@ -535,13 +507,13 @@ END(stub_execve) ENTRY(stub_execveat) CFI_STARTPROC addq $8, %rsp - PARTIAL_FRAME 0 - SAVE_REST + DEFAULT_FRAME 0 + SAVE_EXTRA_REGS FIXUP_TOP_OF_STACK %r11 call sys_execveat RESTORE_TOP_OF_STACK %r11 movq %rax,RAX(%rsp) - RESTORE_REST + RESTORE_EXTRA_REGS jmp int_ret_from_sys_call CFI_ENDPROC END(stub_execveat) @@ -553,12 +525,12 @@ END(stub_execveat) ENTRY(stub_rt_sigreturn) CFI_STARTPROC addq $8, %rsp - PARTIAL_FRAME 0 - SAVE_REST + DEFAULT_FRAME 0 + SAVE_EXTRA_REGS FIXUP_TOP_OF_STACK %r11 call sys_rt_sigreturn movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer - RESTORE_REST + RESTORE_EXTRA_REGS jmp int_ret_from_sys_call CFI_ENDPROC END(stub_rt_sigreturn) @@ -567,12 +539,12 @@ END(stub_rt_sigreturn) ENTRY(stub_x32_rt_sigreturn) CFI_STARTPROC addq $8, %rsp - PARTIAL_FRAME 0 - SAVE_REST + DEFAULT_FRAME 0 + SAVE_EXTRA_REGS FIXUP_TOP_OF_STACK %r11 call sys32_x32_rt_sigreturn movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer - RESTORE_REST + RESTORE_EXTRA_REGS jmp int_ret_from_sys_call CFI_ENDPROC END(stub_x32_rt_sigreturn) @@ -580,13 +552,13 @@ END(stub_x32_rt_sigreturn) ENTRY(stub_x32_execve) CFI_STARTPROC addq $8, %rsp - PARTIAL_FRAME 0 - SAVE_REST + DEFAULT_FRAME 0 + SAVE_EXTRA_REGS FIXUP_TOP_OF_STACK %r11 call compat_sys_execve RESTORE_TOP_OF_STACK %r11 movq %rax,RAX(%rsp) - RESTORE_REST + RESTORE_EXTRA_REGS jmp int_ret_from_sys_call CFI_ENDPROC END(stub_x32_execve) @@ -594,13 +566,13 @@ END(stub_x32_execve) ENTRY(stub_x32_execveat) CFI_STARTPROC addq $8, %rsp - PARTIAL_FRAME 0 - SAVE_REST + DEFAULT_FRAME 0 + SAVE_EXTRA_REGS FIXUP_TOP_OF_STACK %r11 call compat_sys_execveat RESTORE_TOP_OF_STACK %r11 movq %rax,RAX(%rsp) - RESTORE_REST + RESTORE_EXTRA_REGS jmp int_ret_from_sys_call CFI_ENDPROC END(stub_x32_execveat) @@ -656,42 +628,28 @@ END(interrupt) /* 0(%rsp): ~(interrupt number) */ .macro interrupt func - /* reserve pt_regs for scratch regs and rbp */ - subq $ORIG_RAX-RBP, %rsp - CFI_ADJUST_CFA_OFFSET ORIG_RAX-RBP cld - /* start from rbp in pt_regs and jump over */ - movq_cfi rdi, (RDI-RBP) - movq_cfi rsi, (RSI-RBP) - movq_cfi rdx, (RDX-RBP) - movq_cfi rcx, (RCX-RBP) - movq_cfi rax, (RAX-RBP) - movq_cfi r8, (R8-RBP) - movq_cfi r9, (R9-RBP) - movq_cfi r10, (R10-RBP) - movq_cfi r11, (R11-RBP) - - /* Save rbp so that we can unwind from get_irq_regs() */ - movq_cfi rbp, 0 - - /* Save previous stack value */ - movq %rsp, %rsi + ALLOC_PT_GPREGS_ON_STACK -RBP + SAVE_C_REGS -RBP + /* this goes to 0(%rsp) for unwinder, not for saving the value: */ + SAVE_EXTRA_REGS_RBP -RBP + + leaq -RBP(%rsp),%rdi /* arg1 for \func (pointer to pt_regs) */ - leaq -RBP(%rsp),%rdi /* arg1 for handler */ - testl $3, CS-RBP(%rsi) + testl $3, CS-RBP(%rsp) je 1f SWAPGS +1: /* * irq_count is used to check if a CPU is already on an interrupt stack * or not. While this is essentially redundant with preempt_count it is * a little cheaper to use a separate counter in the PDA (short of * moving irq_enter into assembly, which would be too much work) */ -1: incl PER_CPU_VAR(irq_count) + movq %rsp, %rsi + incl PER_CPU_VAR(irq_count) cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp CFI_DEF_CFA_REGISTER rsi - - /* Store previous stack value */ pushq %rsi CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \ 0x77 /* DW_OP_breg7 */, 0, \ @@ -800,7 +758,8 @@ retint_swapgs: /* return to user-space */ */ irq_return_via_sysret: CFI_REMEMBER_STATE - RESTORE_ARGS 1,8,1 + RESTORE_C_REGS + REMOVE_PT_GPREGS_FROM_STACK 8 movq (RSP-RIP)(%rsp),%rsp USERGS_SYSRET64 CFI_RESTORE_STATE @@ -816,7 +775,8 @@ retint_restore_args: /* return to kernel space */ */ TRACE_IRQS_IRETQ restore_args: - RESTORE_ARGS 1,8,1 + RESTORE_C_REGS + REMOVE_PT_GPREGS_FROM_STACK 8 irq_return: INTERRUPT_RETURN @@ -887,12 +847,12 @@ retint_signal: jz retint_swapgs TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - SAVE_REST + SAVE_EXTRA_REGS movq $-1,ORIG_RAX(%rsp) xorl %esi,%esi # oldset movq %rsp,%rdi # &pt_regs call do_notify_resume - RESTORE_REST + RESTORE_EXTRA_REGS DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF GET_THREAD_INFO(%rcx) @@ -1019,8 +979,7 @@ ENTRY(\sym) pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ .endif - subq $ORIG_RAX-R15, %rsp - CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 + ALLOC_PT_GPREGS_ON_STACK .if \paranoid .if \paranoid == 1 @@ -1269,7 +1228,9 @@ ENTRY(xen_failsafe_callback) addq $0x30,%rsp CFI_ADJUST_CFA_OFFSET -0x30 pushq_cfi $-1 /* orig_ax = -1 => not a system call */ - SAVE_ALL + ALLOC_PT_GPREGS_ON_STACK + SAVE_C_REGS + SAVE_EXTRA_REGS jmp error_exit CFI_ENDPROC END(xen_failsafe_callback) @@ -1321,11 +1282,15 @@ ENTRY(paranoid_exit) jnz paranoid_restore TRACE_IRQS_IRETQ 0 SWAPGS_UNSAFE_STACK - RESTORE_ALL 8 + RESTORE_EXTRA_REGS + RESTORE_C_REGS + REMOVE_PT_GPREGS_FROM_STACK 8 INTERRUPT_RETURN paranoid_restore: TRACE_IRQS_IRETQ_DEBUG 0 - RESTORE_ALL 8 + RESTORE_EXTRA_REGS + RESTORE_C_REGS + REMOVE_PT_GPREGS_FROM_STACK 8 INTERRUPT_RETURN CFI_ENDPROC END(paranoid_exit) @@ -1339,21 +1304,8 @@ ENTRY(error_entry) CFI_ADJUST_CFA_OFFSET 15*8 /* oldrax contains error code */ cld - movq %rdi, RDI+8(%rsp) - movq %rsi, RSI+8(%rsp) - movq %rdx, RDX+8(%rsp) - movq %rcx, RCX+8(%rsp) - movq %rax, RAX+8(%rsp) - movq %r8, R8+8(%rsp) - movq %r9, R9+8(%rsp) - movq %r10, R10+8(%rsp) - movq %r11, R11+8(%rsp) - movq_cfi rbx, RBX+8 - movq %rbp, RBP+8(%rsp) - movq %r12, R12+8(%rsp) - movq %r13, R13+8(%rsp) - movq %r14, R14+8(%rsp) - movq %r15, R15+8(%rsp) + SAVE_C_REGS 8 + SAVE_EXTRA_REGS 8 xorl %ebx,%ebx testl $3,CS+8(%rsp) je error_kernelspace @@ -1402,7 +1354,7 @@ END(error_entry) ENTRY(error_exit) DEFAULT_FRAME movl %ebx,%eax - RESTORE_REST + RESTORE_EXTRA_REGS DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF GET_THREAD_INFO(%rcx) @@ -1621,8 +1573,8 @@ end_repeat_nmi: * so that we repeat another NMI. */ pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ - subq $ORIG_RAX-R15, %rsp - CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 + ALLOC_PT_GPREGS_ON_STACK + /* * Use save_paranoid to handle SWAPGS, but no need to use paranoid_exit * as we should not be calling schedule in NMI context. @@ -1661,8 +1613,10 @@ end_repeat_nmi: nmi_swapgs: SWAPGS_UNSAFE_STACK nmi_restore: + RESTORE_EXTRA_REGS + RESTORE_C_REGS /* Pop the extra iret frame at once */ - RESTORE_ALL 6*8 + REMOVE_PT_GPREGS_FROM_STACK 6*8 /* Clear the NMI executing stack variable */ movq $0, 5*8(%rsp)