From: Imre Kaloz <kaloz@openwrt.org>
Date: Thu, 7 May 2009 19:23:04 +0000 (+0000)
Subject: backport mv88e6095 support for orion - this also fixes the non-working switch-port... 
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=768cb31d9a601b8aa7678ca1fc3af3a81503ed09;p=openwrt%2Fstaging%2Flinusw.git

backport mv88e6095 support for orion - this also fixes the non-working switch-port on some routers

SVN-Revision: 15697
---

diff --git a/target/linux/orion/patches/030-mv88e6095_support.patch b/target/linux/orion/patches/030-mv88e6095_support.patch
new file mode 100644
index 0000000000..c71ce040fa
--- /dev/null
+++ b/target/linux/orion/patches/030-mv88e6095_support.patch
@@ -0,0 +1,115 @@
+From: Lennert Buytenhek <buytenh@wantstofly.org>
+Date: Fri, 20 Mar 2009 09:50:39 +0000 (+0000)
+Subject: dsa: add support for the Marvell 88E6095/6095F switch chips
+X-Git-Tag: v2.6.30-rc1~662^2~146
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=076d3e10a54caa2c148de5732c126c7a31381d48
+
+dsa: add support for the Marvell 88E6095/6095F switch chips
+
+Add support for the Marvell 88E6095/6095F switch chips.  These
+chips are similar to the 88e6131, so we can add the support to
+mv88e6131.c easily.
+
+Thanks to Gary Thomas <gary@mlbassoc.com> and Jesper Dangaard
+Brouer <hawk@diku.dk> for testing various patches.
+
+Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
+Tested-by: Gary Thomas <gary@mlbassoc.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
+index 49211b3..c51b554 100644
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -41,13 +41,13 @@ config NET_DSA_MV88E6XXX_NEED_PPU
+ 	default n
+ 
+ config NET_DSA_MV88E6131
+-	bool "Marvell 88E6131 ethernet switch chip support"
++	bool "Marvell 88E6095/6095F/6131 ethernet switch chip support"
+ 	select NET_DSA_MV88E6XXX
+ 	select NET_DSA_MV88E6XXX_NEED_PPU
+ 	select NET_DSA_TAG_DSA
+ 	---help---
+-	  This enables support for the Marvell 88E6131 ethernet switch
+-	  chip.
++	  This enables support for the Marvell 88E6095/6095F/6131
++	  ethernet switch chips.
+ 
+ config NET_DSA_MV88E6123_61_65
+ 	bool "Marvell 88E6123/6161/6165 ethernet switch chip support"
+diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c
+index 70fae24..0029957 100644
+--- a/net/dsa/mv88e6131.c
++++ b/net/dsa/mv88e6131.c
+@@ -1,6 +1,6 @@
+ /*
+- * net/dsa/mv88e6131.c - Marvell 88e6131 switch chip support
+- * Copyright (c) 2008 Marvell Semiconductor
++ * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support
++ * Copyright (c) 2008-2009 Marvell Semiconductor
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+@@ -21,6 +21,8 @@ static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr)
+ 	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
+ 	if (ret >= 0) {
+ 		ret &= 0xfff0;
++		if (ret == 0x0950)
++			return "Marvell 88E6095/88E6095F";
+ 		if (ret == 0x1060)
+ 			return "Marvell 88E6131";
+ 	}
+@@ -36,7 +38,7 @@ static int mv88e6131_switch_reset(struct dsa_switch *ds)
+ 	/*
+ 	 * Set all ports to the disabled state.
+ 	 */
+-	for (i = 0; i < 8; i++) {
++	for (i = 0; i < 11; i++) {
+ 		ret = REG_READ(REG_PORT(i), 0x04);
+ 		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ 	}
+@@ -136,7 +138,7 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
+ 	 * Clear all trunk masks.
+ 	 */
+ 	for (i = 0; i < 8; i++)
+-		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
++		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
+ 
+ 	/*
+ 	 * Clear all trunk mappings.
+@@ -159,9 +161,13 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
+ 
+ 	/*
+ 	 * MAC Forcing register: don't force link, speed, duplex
+-	 * or flow control state to any particular values.
++	 * or flow control state to any particular values on physical
++	 * ports, but force the CPU port to 1000 Mb/s full duplex.
+ 	 */
+-	REG_WRITE(addr, 0x01, 0x0003);
++	if (p == ds->cpu_port)
++		REG_WRITE(addr, 0x01, 0x003e);
++	else
++		REG_WRITE(addr, 0x01, 0x0003);
+ 
+ 	/*
+ 	 * Port Control: disable Core Tag, disable Drop-on-Lock,
+@@ -268,7 +274,7 @@ static int mv88e6131_setup(struct dsa_switch *ds)
+ 	if (ret < 0)
+ 		return ret;
+ 
+-	for (i = 0; i < 6; i++) {
++	for (i = 0; i < 11; i++) {
+ 		ret = mv88e6131_setup_port(ds, i);
+ 		if (ret < 0)
+ 			return ret;
+@@ -279,7 +285,7 @@ static int mv88e6131_setup(struct dsa_switch *ds)
+ 
+ static int mv88e6131_port_to_phy_addr(int port)
+ {
+-	if (port >= 0 && port != 3 && port <= 7)
++	if (port >= 0 && port <= 11)
+ 		return port;
+ 	return -1;
+ }