From: Fabio Estevam Date: Mon, 7 May 2012 10:26:00 +0000 (+0000) Subject: mx53loco: Turn on VUSB regulator X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=768a05971030c0c57e05063f20449b8d4138293e;p=project%2Fbcm63xx%2Fu-boot.git mx53loco: Turn on VUSB regulator On the mx53loco board with mc34708 PMIC it is necessary to turn on VUSB regulator so that the mx53 USBH1 PHY receives the 3.3V voltage. Tested by inserting a USB pen drive in the upper USB slot (USBH1) and then issued the commands: usb start usb info ,which correctly detected and printed the USB pen drive information. Signed-off-by: Fabio Estevam Acked-by: Jason Liu Acked-by: Stefano Babic --- diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 8f5ded988d..a49b00a812 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -359,6 +359,15 @@ static int power_init(void) pmic_reg_read(p, REG_POWER_CTL2, &val); val = (val & ~TIMER_MASK_MC34708) | TIMER_4S_MC34708; ret |= pmic_reg_write(p, REG_POWER_CTL2, val); + + /* Set VUSBSEL and VUSBEN for USB PHY supply*/ + pmic_reg_read(p, REG_MODE_0, &val); + val |= (VUSBSEL_MC34708 | VUSBEN_MC34708); + ret |= pmic_reg_write(p, REG_MODE_0, val); + + /* Set SWBST to 5V in auto mode */ + val = SWBST_AUTO; + ret |= pmic_reg_write(p, SWBST_CTRL, val); } return ret; diff --git a/include/fsl_pmic.h b/include/fsl_pmic.h index 3b7cd37fb7..64c1e2ef65 100644 --- a/include/fsl_pmic.h +++ b/include/fsl_pmic.h @@ -131,5 +131,6 @@ enum { #define VUSBSEL_MC34708 (1 << 2) #define VUSBEN_MC34708 (1 << 3) #define SWBST_CTRL 31 +#define SWBST_AUTO 0x8 #endif