From: Felix Fietkau Date: Sun, 18 Jan 2015 20:16:50 +0000 (+0000) Subject: ralink: improve tx_timeout function X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=75d54ebba660355f033c26c865482124ffcce9c1;p=openwrt%2Fsvn-archive%2Farchive.git ralink: improve tx_timeout function * use default timeout value * print more debug ring info * move timeout reset function to workqueue Signed-off-by: michael lee SVN-Revision: 44043 --- diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c index ca78d71597..4252ff3ad2 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c @@ -40,7 +40,6 @@ #include "mdio.h" #include "ralink_ethtool.h" -#define TX_TIMEOUT (2 * HZ) #define MAX_RX_LENGTH 1536 #define FE_RX_OFFSET (NET_SKB_PAD + NET_IP_ALIGN) #define FE_RX_HLEN (FE_RX_OFFSET + VLAN_ETH_HLEN + VLAN_HLEN + \ @@ -72,9 +71,11 @@ static const u32 fe_reg_table_default[FE_REG_COUNT] = { [FE_REG_TX_BASE_PTR0] = FE_TX_BASE_PTR0, [FE_REG_TX_MAX_CNT0] = FE_TX_MAX_CNT0, [FE_REG_TX_CTX_IDX0] = FE_TX_CTX_IDX0, + [FE_REG_TX_DTX_IDX0] = FE_TX_DTX_IDX0, [FE_REG_RX_BASE_PTR0] = FE_RX_BASE_PTR0, [FE_REG_RX_MAX_CNT0] = FE_RX_MAX_CNT0, [FE_REG_RX_CALC_IDX0] = FE_RX_CALC_IDX0, + [FE_REG_RX_DRX_IDX0] = FE_RX_DRX_IDX0, [FE_REG_FE_INT_ENABLE] = FE_FE_INT_ENABLE, [FE_REG_FE_INT_STATUS] = FE_FE_INT_STATUS, [FE_REG_FE_DMA_VID_BASE] = FE_DMA_VID0, @@ -84,6 +85,11 @@ static const u32 fe_reg_table_default[FE_REG_COUNT] = { static const u32 *fe_reg_table = fe_reg_table_default; +struct fe_work_t { + int bitnr; + void (*action)(struct fe_priv *); +}; + static void __iomem *fe_base = 0; void fe_w32(u32 val, unsigned reg) @@ -683,13 +689,11 @@ static int fe_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } - spin_lock(&priv->page_lock); tx_num = 1 + (skb_shinfo(skb)->nr_frags >> 1); tx = fe_reg_r32(FE_REG_TX_CTX_IDX0); if (unlikely(fe_empty_txd(priv, tx) <= tx_num)) { netif_stop_queue(dev); - spin_unlock(&priv->page_lock); netif_err(priv, tx_queued,dev, "Tx Ring full when queue awake!\n"); return NETDEV_TX_BUSY; @@ -704,8 +708,6 @@ static int fe_start_xmit(struct sk_buff *skb, struct net_device *dev) stats->tx_bytes += len; } - spin_unlock(&priv->page_lock); - return NETDEV_TX_OK; } @@ -779,8 +781,8 @@ static int fe_poll_rx(struct napi_struct *napi, int budget, dma_unmap_single(&netdev->dev, trxd.rxd1, priv->rx_buf_size, DMA_FROM_DEVICE); pktlen = RX_DMA_PLEN0(trxd.rxd2); - skb_put(skb, pktlen); skb->dev = netdev; + skb_put(skb, pktlen); if (trxd.rxd4 & checksum_bit) { skb->ip_summed = CHECKSUM_UNNECESSARY; } else { @@ -902,7 +904,7 @@ poll_again: if (unlikely(netif_msg_intr(priv))) { mask = fe_reg_r32(FE_REG_FE_INT_ENABLE); netdev_info(priv->netdev, - "done tx %d, rx %d, intr 0x%x/0x%x\n", + "done tx %d, rx %d, intr 0x%08x/0x%x\n", tx_done, rx_done, status, mask); } @@ -924,13 +926,27 @@ static void fe_tx_timeout(struct net_device *dev) priv->netdev->stats.tx_errors++; netif_err(priv, tx_err, dev, - "transmit timed out, waking up the queue\n"); - netif_info(priv, drv, dev, ": dma_cfg:%08x, free_idx:%d, " \ - "dma_ctx_idx=%u, dma_crx_idx=%u\n", - fe_reg_r32(FE_REG_PDMA_GLO_CFG), priv->tx_free_idx, + "transmit timed out\n"); + netif_info(priv, drv, dev, "dma_cfg:%08x\n", + fe_reg_r32(FE_REG_PDMA_GLO_CFG)); + netif_info(priv, drv, dev, "tx_ring=%d, " \ + "base=%08x, max=%u, ctx=%u, dtx=%u, fdx=%d\n", 0, + fe_reg_r32(FE_REG_TX_BASE_PTR0), + fe_reg_r32(FE_REG_TX_MAX_CNT0), fe_reg_r32(FE_REG_TX_CTX_IDX0), - fe_reg_r32(FE_REG_RX_CALC_IDX0)); - netif_wake_queue(dev); + fe_reg_r32(FE_REG_TX_DTX_IDX0), + priv->tx_free_idx + ); + netif_info(priv, drv, dev, "rx_ring=%d, " \ + "base=%08x, max=%u, calc=%u, drx=%u\n", 0, + fe_reg_r32(FE_REG_RX_BASE_PTR0), + fe_reg_r32(FE_REG_RX_MAX_CNT0), + fe_reg_r32(FE_REG_RX_CALC_IDX0), + fe_reg_r32(FE_REG_RX_DRX_IDX0) + ); + + if (!test_and_set_bit(FE_FLAG_RESET_PENDING, priv->pending_flags)) + schedule_work(&priv->pending_work); } static irqreturn_t fe_handle_irq(int irq, void *dev) @@ -1287,6 +1303,45 @@ static const struct net_device_ops fe_netdev_ops = { #endif }; +static void fe_reset_pending(struct fe_priv *priv) +{ + struct net_device *dev = priv->netdev; + int err; + + rtnl_lock(); + fe_stop(dev); + + err = fe_open(dev); + if (err) + goto error; + rtnl_unlock(); + + return; +error: + netif_alert(priv, ifup, dev, + "Driver up/down cycle failed, closing device.\n"); + dev_close(dev); + rtnl_unlock(); +} + +static const struct fe_work_t fe_work[] = { + {FE_FLAG_RESET_PENDING, fe_reset_pending}, +}; + +static void fe_pending_work(struct work_struct *work) +{ + struct fe_priv *priv = container_of(work, struct fe_priv, pending_work); + int i; + bool pending; + + for (i = 0; i < ARRAY_SIZE(fe_work); i++) { + pending = test_and_clear_bit(fe_work[i].bitnr, + priv->pending_flags); + if (pending) + fe_work[i].action(priv); + } +} + static int fe_probe(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1323,7 +1378,6 @@ static int fe_probe(struct platform_device *pdev) SET_NETDEV_DEV(netdev, &pdev->dev); netdev->netdev_ops = &fe_netdev_ops; netdev->base_addr = (unsigned long) fe_base; - netdev->watchdog_timeo = TX_TIMEOUT; netdev->irq = platform_get_irq(pdev, 0); if (netdev->irq < 0) { @@ -1370,6 +1424,7 @@ static int fe_probe(struct platform_device *pdev) err = -EINVAL; goto err_free_dev; } + INIT_WORK(&priv->pending_work, fe_pending_work); netif_napi_add(netdev, &priv->rx_napi, fe_poll, 32); fe_set_ethtool_ops(netdev); @@ -1404,6 +1459,8 @@ static int fe_remove(struct platform_device *pdev) if (priv->hw_stats) kfree(priv->hw_stats); + cancel_work_sync(&priv->pending_work); + unregister_netdev(dev); free_netdev(dev); platform_set_drvdata(pdev, NULL); diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h index e41d12517c..007ad722d6 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h @@ -33,9 +33,11 @@ enum fe_reg { FE_REG_TX_BASE_PTR0, FE_REG_TX_MAX_CNT0, FE_REG_TX_CTX_IDX0, + FE_REG_TX_DTX_IDX0, FE_REG_RX_BASE_PTR0, FE_REG_RX_MAX_CNT0, FE_REG_RX_CALC_IDX0, + FE_REG_RX_DRX_IDX0, FE_REG_FE_INT_ENABLE, FE_REG_FE_INT_STATUS, FE_REG_FE_DMA_VID_BASE, @@ -44,7 +46,12 @@ enum fe_reg { FE_REG_COUNT }; -#define FE_DRV_VERSION "0.1.0" +enum fe_work_flag { + FE_FLAG_RESET_PENDING, + FE_FLAG_MAX +}; + +#define FE_DRV_VERSION "0.1.1" /* power of 2 to let NEXT_TX_DESP_IDX work */ #ifdef CONFIG_SOC_MT7621 @@ -451,6 +458,8 @@ struct fe_priv struct fe_hw_stats *hw_stats; unsigned long vlan_map; + struct work_struct pending_work; + DECLARE_BITMAP(pending_flags, FE_FLAG_MAX); }; extern const struct of_device_id of_fe_match[]; diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c index 50e39af248..0c1384b51c 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c @@ -72,9 +72,11 @@ static const u32 mt7620_reg_table[FE_REG_COUNT] = { [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0, [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0, [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0, + [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0, [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0, [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0, [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0, + [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0, [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE, [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS, [FE_REG_FE_DMA_VID_BASE] = MT7620_DMA_VID, @@ -89,9 +91,11 @@ static const u32 mt7621_reg_table[FE_REG_COUNT] = { [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0, [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0, [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0, + [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0, [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0, [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0, [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0, + [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0, [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE, [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS, [FE_REG_FE_DMA_VID_BASE] = MT7621_DMA_VID, diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt305x.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt305x.c index 2650e30ca4..348005b345 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt305x.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt305x.c @@ -33,9 +33,11 @@ static const u32 rt5350_reg_table[FE_REG_COUNT] = { [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0, [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0, [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0, + [FE_REG_TX_DTX_IDX0] = RT5350_TX_DTX_IDX0, [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0, [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0, [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0, + [FE_REG_RX_DRX_IDX0] = RT5350_RX_DRX_IDX0, [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE, [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS, [FE_REG_FE_RST_GL] = 0,