From: Christian Marangi <ansuelsmth@gmail.com>
Date: Sat, 9 Dec 2023 13:31:02 +0000 (+0100)
Subject: qualcommax: switch to qca8081 upstream PHY driver
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=75ad5c24142a18fe22bc7ee5f46759a58a832f7c;p=openwrt%2Fstaging%2Fnbd.git

qualcommax: switch to qca8081 upstream PHY driver

Switch to qca8081 upstream PHY. Update every device that have LEDs
attached to the qca8081 PHY to follow new way of defining the LEDs and
add original OEM configuration.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---

diff --git a/target/linux/qualcommax/config-6.1 b/target/linux/qualcommax/config-6.1
index 7a983b961b..ad08d05f70 100644
--- a/target/linux/qualcommax/config-6.1
+++ b/target/linux/qualcommax/config-6.1
@@ -55,6 +55,7 @@ CONFIG_ARM_PSCI_CPUIDLE=y
 CONFIG_ARM_PSCI_FW=y
 # CONFIG_ARM_QCOM_CPUFREQ_HW is not set
 CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
+CONFIG_AT803X_PHY=y
 CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts
index 73bc13cf32..bb4634d054 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts
@@ -8,6 +8,7 @@
 #include "ipq8074-ess.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Yuncore AX880";
@@ -313,12 +314,36 @@
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <24>;
 		reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 
 	qca8081_28: ethernet-phy@28 {
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <28>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
index 0df16e9ad7..0408c6ed85 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
@@ -378,6 +378,18 @@
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <24>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
index a4548a7783..4519a7a6bf 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
@@ -163,6 +163,25 @@
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <28>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
index 5e478d75ee..f3e67311c3 100644
--- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
@@ -10,6 +10,10 @@ arcadyan,aw1000)
 	ucidef_set_led_netdev "5g" "5G" "green:5g" "wwan0"
 	ucidef_set_led_netdev "wan" "WAN" "green:internet" "wan"
 	;;
+dynalink,dl-wrx36)
+	ucidef_set_led_netdev "wan-port-link-green" "WAN-PORT-LINK-GREEN" "90000.mdio-1:1c:green:wan" "wan" "link_2500"
+	ucidef_set_led_netdev "wan-port-link-yellow" "WAN-PORT-LINK-YELLOW" "90000.mdio-1:1c:yellow:wan" "wan" "tx rx link_10 link_100 link_1000"
+	;;
 edgecore,eap102)
 	ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
 	;;
@@ -32,6 +36,9 @@ redmi,ax6|\
 xiaomi,ax3600)
 	ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
 	;;
+xiaomi,ax9000)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+	;;
 qnap,301w)
 	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
 	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
@@ -40,6 +47,10 @@ qnap,301w)
 	ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "10g-1"
 	ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "10g-2"
 	;;
+yuncore,ax880)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+	ucidef_set_led_netdev "lan-port-link" "LAN-PORT-LINK" "90000.mdio-1:1c:green:lan" "lan" "tx rx link_10 link_100 link_1000 link_2500"
+	;;
 esac
 
 board_config_flush