From: Olliver Schinagl Date: Tue, 30 Aug 2022 19:25:25 +0000 (+0200) Subject: realtek: Whitespace and codestyle cleanup X-Git-Tag: v23.05.0-rc1~1462 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=758c88b96963;p=openwrt%2Fstaging%2Fpepe2k.git realtek: Whitespace and codestyle cleanup Fix some ugly whitepsaces and codestyle issues around the realtek sources. While this is by no means perfect, it catches what it caught. Signed-off-by: Olliver Schinagl --- diff --git a/target/linux/realtek/files-5.15/Documentation/devicetree/bindings/realtek,otto-timer.yaml b/target/linux/realtek/files-5.15/Documentation/devicetree/bindings/realtek,otto-timer.yaml index b508362a72..40e834e377 100644 --- a/target/linux/realtek/files-5.15/Documentation/devicetree/bindings/realtek,otto-timer.yaml +++ b/target/linux/realtek/files-5.15/Documentation/devicetree/bindings/realtek,otto-timer.yaml @@ -17,7 +17,7 @@ description: | RTL83XX: 0x3100, 0x3110, 0x3120, 0x3130, 0x3140 RTL93XX: 0x3200, 0x3210, 0x3220, 0x3230, 0x3240 - + properties: compatible: items: diff --git a/target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h b/target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h index d95e5fb098..aa2d918efb 100644 --- a/target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h +++ b/target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h @@ -350,9 +350,7 @@ #define RTL931X_MAC_L2_GLOBAL_CTRL2 (0x1358) #define RTL931X_MAC_L2_GLOBAL_CTRL1 (0x5548) -/* - * Switch interrupts - */ +/* Switch interrupts */ #define RTL838X_IMR_GLB (0x1100) #define RTL838X_IMR_PORT_LINK_STS_CHG (0x1104) #define RTL838X_ISR_GLB_SRC (0x1148) diff --git a/target/linux/realtek/files-5.15/arch/mips/kernel/cevt-rtl9300.c b/target/linux/realtek/files-5.15/arch/mips/kernel/cevt-rtl9300.c index 1c8c30de5d..447e754f20 100644 --- a/target/linux/realtek/files-5.15/arch/mips/kernel/cevt-rtl9300.c +++ b/target/linux/realtek/files-5.15/arch/mips/kernel/cevt-rtl9300.c @@ -11,7 +11,7 @@ #include -/* +/* * Timer registers * the RTL9300/9310 SoCs have 6 timers, each register block 0x10 apart */ @@ -59,6 +59,7 @@ static irqreturn_t rtl9300_timer_interrupt(int irq, void *dev_id) writel(v, rtl_clk->base + RTL9300_TC_INT); clk->event_handler(clk); + return IRQ_HANDLED; } @@ -101,6 +102,7 @@ static int rtl9300_state_periodic(struct clock_event_device *clk) rtl9300_clock_stop(base); writel(RTL9300_CLOCK_RATE / HZ, base + RTL9300_TC_DATA); rtl9300_timer_start(base, TIMER_MODE_REPEAT); + return 0; } @@ -112,6 +114,7 @@ static int rtl9300_state_oneshot(struct clock_event_device *clk) rtl9300_clock_stop(base); writel(RTL9300_CLOCK_RATE / HZ, base + RTL9300_TC_DATA); rtl9300_timer_start(base, TIMER_MODE_ONCE); + return 0; } @@ -121,6 +124,7 @@ static int rtl9300_shutdown(struct clock_event_device *clk) pr_debug("------------- rtl9300_shutdown %08x\n", (u32)base); rtl9300_clock_stop(base); + return 0; } diff --git a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl838x-sram.S b/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl838x-sram.S index 527436bbab..2431723133 100644 --- a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl838x-sram.S +++ b/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl838x-sram.S @@ -147,4 +147,3 @@ wait_cpu: .globl rtcl_838x_dram_size rtcl_838x_dram_size: .word .-rtcl_838x_dram_start - diff --git a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl839x-sram.S b/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl839x-sram.S index cd43dfaabd..eb44cd90f1 100644 --- a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl839x-sram.S +++ b/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl839x-sram.S @@ -139,4 +139,3 @@ wait_pllclock: .globl rtcl_839x_dram_size rtcl_839x_dram_size: .word .-rtcl_839x_dram_start - diff --git a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.c b/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.c index 9b8183fbeb..ce5c166bca 100644 --- a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.c +++ b/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.c @@ -467,9 +467,9 @@ static long rtcl_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long */ #define RTCL_SRAM_FUNC(SOC, PBASE, FN) ({ \ - rtcl_##SOC##_sram_##FN = ((void *)&rtcl_##SOC##_dram_##FN \ - - (void *)&rtcl_##SOC##_dram_start) \ - + (void *)PBASE; }) + rtcl_##SOC##_sram_##FN = ((void *)&rtcl_##SOC##_dram_##FN - \ + (void *)&rtcl_##SOC##_dram_start) + \ + (void *)PBASE; }) static const struct clk_ops rtcl_clk_ops = { .set_rate = rtcl_set_rate, diff --git a/target/linux/realtek/files-5.15/drivers/gpio/gpio-rtl8231.c b/target/linux/realtek/files-5.15/drivers/gpio/gpio-rtl8231.c index 368c4fa60f..0b0d039059 100644 --- a/target/linux/realtek/files-5.15/drivers/gpio/gpio-rtl8231.c +++ b/target/linux/realtek/files-5.15/drivers/gpio/gpio-rtl8231.c @@ -55,7 +55,7 @@ static u32 rtl8231_read(struct rtl8231_gpios *gpios, u32 reg) if (n >= USEC_TIMEOUT) return 0x80000000; - + pr_debug("%s: %x, %x, %x\n", __func__, gpios->smi_bus_id, reg, (t & 0xffff0000) >> 16); @@ -127,6 +127,7 @@ static int rtl8231_pin_dir(struct rtl8231_gpios *gpios, u32 gpio, u32 dir) rtl8231_write(gpios, pin_dir_addr, v); gpios->reg_shadow[pin_dir_addr] = v; gpios->reg_cached |= 1 << pin_dir_addr; + return 0; } @@ -150,6 +151,7 @@ static int rtl8231_pin_dir_get(struct rtl8231_gpios *gpios, u32 gpio, u32 *dir) *dir = 1; else *dir = 0; + return 0; } @@ -166,6 +168,7 @@ static int rtl8231_pin_set(struct rtl8231_gpios *gpios, u32 gpio, u32 data) rtl8231_write(gpios, RTL8231_GPIO_DATA(gpio), v); gpios->reg_shadow[RTL8231_GPIO_DATA(gpio)] = v; gpios->reg_cached |= 1 << RTL8231_GPIO_DATA(gpio); + return 0; } @@ -179,6 +182,7 @@ static int rtl8231_pin_get(struct rtl8231_gpios *gpios, u32 gpio, u16 *state) } *state = v & 0xffff; + return 0; } @@ -191,6 +195,7 @@ static int rtl8231_direction_input(struct gpio_chip *gc, unsigned int offset) mutex_lock(&miim_lock); err = rtl8231_pin_dir(gpios, offset, 1); mutex_unlock(&miim_lock); + return err; } @@ -203,8 +208,10 @@ static int rtl8231_direction_output(struct gpio_chip *gc, unsigned int offset, i mutex_lock(&miim_lock); err = rtl8231_pin_dir(gpios, offset, 0); mutex_unlock(&miim_lock); + if (!err) err = rtl8231_pin_set(gpios, offset, value); + return err; } @@ -217,6 +224,7 @@ static int rtl8231_get_direction(struct gpio_chip *gc, unsigned int offset) mutex_lock(&miim_lock); rtl8231_pin_dir_get(gpios, offset, &v); mutex_unlock(&miim_lock); + return v; } @@ -228,8 +236,10 @@ static int rtl8231_gpio_get(struct gpio_chip *gc, unsigned int offset) mutex_lock(&miim_lock); rtl8231_pin_get(gpios, offset, &state); mutex_unlock(&miim_lock); + if (state & (1 << (offset % 16))) return 1; + return 0; } @@ -337,8 +347,7 @@ static int rtl8231_gpio_probe(struct platform_device *pdev) gpios->gc.get = rtl8231_gpio_get; gpios->gc.get_direction = rtl8231_get_direction; - err = devm_gpiochip_add_data(dev, &gpios->gc, gpios); - return err; + return devm_gpiochip_add_data(dev, &gpios->gc, gpios); } static struct platform_driver rtl8231_gpio_driver = { diff --git a/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c b/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c index 382dfd4010..a1b5f669ba 100644 --- a/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c +++ b/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c @@ -23,7 +23,7 @@ struct i2c_drv_data { void (*config_io)(struct rtl9300_i2c *i2c, int scl_num, int sda_num); u32 mst2_offset; }; - + DEFINE_MUTEX(i2c_lock); static void rtl9300_i2c_reg_addr_set(struct rtl9300_i2c *i2c, u32 reg, u16 len) @@ -347,7 +347,7 @@ static int rtl9300_i2c_probe(struct platform_device *pdev) int ret = 0; pr_info("%s probing I2C adapter\n", __func__); - + if (!node) { dev_err(i2c->dev, "No DT found\n"); return -EINVAL; @@ -376,7 +376,7 @@ static int rtl9300_i2c_probe(struct platform_device *pdev) case I2C_MAX_STANDARD_MODE_FREQ: i2c->bus_freq = RTL9300_I2C_STD_FREQ; break; - + case I2C_MAX_FAST_MODE_FREQ: i2c->bus_freq = RTL9300_I2C_FAST_FREQ; break; @@ -451,7 +451,7 @@ struct i2c_drv_data rtl9300_i2c_drv_data = { }; struct i2c_drv_data rtl9310_i2c_drv_data = { - .scl0_pin = 13, + .scl0_pin = 13, .scl1_pin = 14, .sda0_pin = 0, .read = rtl9310_i2c_read, diff --git a/target/linux/realtek/files-5.15/drivers/i2c/muxes/i2c-mux-rtl9300.c b/target/linux/realtek/files-5.15/drivers/i2c/muxes/i2c-mux-rtl9300.c index 2f45b0a3cc..b277c125e9 100644 --- a/target/linux/realtek/files-5.15/drivers/i2c/muxes/i2c-mux-rtl9300.c +++ b/target/linux/realtek/files-5.15/drivers/i2c/muxes/i2c-mux-rtl9300.c @@ -123,8 +123,8 @@ static struct device_node *mux_parent_adapter(struct device *dev, struct rtl9300 if (!parent) return ERR_PTR(-EPROBE_DEFER); - if (!(of_device_is_compatible(parent_np, "realtek,rtl9300-i2c") - || of_device_is_compatible(parent_np, "realtek,rtl9310-i2c"))){ + if (!(of_device_is_compatible(parent_np, "realtek,rtl9300-i2c") || + of_device_is_compatible(parent_np, "realtek,rtl9310-i2c"))){ dev_err(dev, "I2C parent not an RTL9300 I2C controller\n"); return ERR_PTR(-ENODEV); } @@ -147,7 +147,7 @@ struct i2c_mux_data rtl9300_i2c_mux_data = { }; struct i2c_mux_data rtl9310_i2c_mux_data = { - .scl0_pin = 13, + .scl0_pin = 13, .scl1_pin = 14, .sda0_pin = 0, .sda_pins = 16, @@ -177,7 +177,7 @@ static int rtl9300_i2c_mux_probe(struct platform_device *pdev) int ret; pr_info("%s probing I2C adapter\n", __func__); - + if (!node) { dev_err(dev, "No DT found\n"); return -EINVAL; diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Kconfig b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Kconfig index 281f08054f..3124ee8d20 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Kconfig +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Kconfig @@ -5,4 +5,3 @@ config NET_DSA_RTL83XX select NET_DSA_TAG_TRAILER help This driver adds support for Realtek RTL83xx series switching. - diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c index fb359dc4fa..de75b83e2d 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c @@ -9,8 +9,8 @@ #include #include #include - #include + #include "rtl83xx.h" extern struct rtl83xx_soc_info soc_info; @@ -90,8 +90,7 @@ void rtl_table_init(void) mutex_init(&rtl838x_tbl_regs[i].lock); } -/* - * Request access to table t in table access register r +/* Request access to table t in table access register r * Returns a handle to a lock for that table */ struct table_reg *rtl_table_get(rtl838x_tbl_reg_t r, int t) @@ -108,9 +107,7 @@ struct table_reg *rtl_table_get(rtl838x_tbl_reg_t r, int t) return &rtl838x_tbl_regs[r]; } -/* - * Release a table r, unlock the corresponding lock - */ +/* Release a table r, unlock the corresponding lock */ void rtl_table_release(struct table_reg *r) { if (!r) @@ -146,24 +143,19 @@ static int rtl_table_exec(struct table_reg *r, bool is_write, int idx) return ret; } -/* - * Reads table index idx into the data registers of the table - */ +/* Reads table index idx into the data registers of the table */ int rtl_table_read(struct table_reg *r, int idx) { return rtl_table_exec(r, false, idx); } -/* - * Writes the content of the table data registers into the table at index idx - */ +/* Writes the content of the table data registers into the table at index idx */ int rtl_table_write(struct table_reg *r, int idx) { return rtl_table_exec(r, true, idx); } -/* - * Returns the address of the ith data register of table register r +/* Returns the address of the ith data register of table register r * the address is relative to the beginning of the Switch-IO block at 0xbb000000 */ inline u16 rtl_table_data(struct table_reg *r, int i) @@ -196,7 +188,7 @@ void rtl838x_set_port_reg(u64 set, int reg) u64 rtl838x_get_port_reg(int reg) { - return ((u64) sw_r32(reg)); + return ((u64)sw_r32(reg)); } /* Port register accessor functions for the RTL839x and RTL931X SoCs */ @@ -212,6 +204,7 @@ u64 rtl839x_get_port_reg_be(int reg) v <<= 32; v |= sw_r32(reg + 4); + return v; } @@ -239,6 +232,7 @@ u64 rtl839x_get_port_reg_le(int reg) v <<= 32; v |= sw_r32(reg); + return v; } @@ -254,6 +248,7 @@ int read_phy(u32 port, u32 page, u32 reg, u32 *val) case RTL9310_FAMILY_ID: return rtl931x_read_phy(port, page, reg, val); } + return -1; } @@ -269,6 +264,7 @@ int write_phy(u32 port, u32 page, u32 reg, u32 val) case RTL9310_FAMILY_ID: return rtl931x_write_phy(port, page, reg, val); } + return -1; } @@ -303,8 +299,7 @@ static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv) bus->name = "rtl838x slave mii"; - /* - * Since the NIC driver is loaded first, we can use the mdio rw functions + /* Since the NIC driver is loaded first, we can use the mdio rw functions * assigned there. */ bus->read = priv->mii_bus->read; @@ -379,21 +374,21 @@ static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv) priv->ports[pn].phy = PHY_RTL930X_SDS; } } else { - if (of_property_read_bool(phy_node, "phy-is-integrated") - && !of_property_read_bool(phy_node, "sfp")) { + if (of_property_read_bool(phy_node, "phy-is-integrated") && + !of_property_read_bool(phy_node, "sfp")) { priv->ports[pn].phy = PHY_RTL8218B_INT; continue; } } - if (!of_property_read_bool(phy_node, "phy-is-integrated") - && of_property_read_bool(phy_node, "sfp")) { + if (!of_property_read_bool(phy_node, "phy-is-integrated") && + of_property_read_bool(phy_node, "sfp")) { priv->ports[pn].phy = PHY_RTL8214FC; continue; } - if (!of_property_read_bool(phy_node, "phy-is-integrated") - && !of_property_read_bool(phy_node, "sfp")) { + if (!of_property_read_bool(phy_node, "phy-is-integrated") && + !of_property_read_bool(phy_node, "sfp")) { priv->ports[pn].phy = PHY_RTL8218B_EXT; continue; } @@ -419,6 +414,7 @@ static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv) } pr_debug("%s done\n", __func__); + return 0; } @@ -435,6 +431,7 @@ static int __init rtl83xx_get_l2aging(struct rtl838x_switch_priv *priv) pr_debug("L2 AGING time: %d sec\n", t); pr_debug("Dynamic aging for ports: %x\n", sw_r32(priv->r->l2_port_aging_out)); + return t; } @@ -469,6 +466,7 @@ int rtl83xx_lag_add(struct dsa_switch *ds, int group, int port, struct netdev_la pr_err("%s: Port %d already member of LAG %d.\n", __func__, port, i); return -ENOSPC; } + switch(info->hash_type) { case NETDEV_LAG_HASH_L2: algomsk |= TRUNK_DISTRIBUTION_ALGO_DMAC_BIT; @@ -497,6 +495,7 @@ int rtl83xx_lag_add(struct dsa_switch *ds, int group, int port, struct netdev_la pr_info("%s: Added port %d to LAG %d. Members now %016llx.\n", __func__, port, group, priv->lags_port_members[group]); + return 0; } @@ -526,12 +525,11 @@ int rtl83xx_lag_del(struct dsa_switch *ds, int group, int port) pr_info("%s: Removed port %d from LAG %d. Members now %016llx.\n", __func__, port, group, priv->lags_port_members[group]); + return 0; } -/* - * Allocate a 64 bit octet counter located in the LOG HW table - */ +/* Allocate a 64 bit octet counter located in the LOG HW table */ static int rtl83xx_octet_cntr_alloc(struct rtl838x_switch_priv *priv) { int idx; @@ -550,8 +548,7 @@ static int rtl83xx_octet_cntr_alloc(struct rtl838x_switch_priv *priv) return idx; } -/* - * Allocate a 32-bit packet counter +/* Allocate a 32-bit packet counter * 2 32-bit packet counters share the location of a 64-bit octet counter * Initially there are no free packet counters and 2 new ones need to be freed * by allocating the corresponding octet counter @@ -585,8 +582,7 @@ int rtl83xx_packet_cntr_alloc(struct rtl838x_switch_priv *priv) return idx; } -/* - * Add an L2 nexthop entry for the L3 routing system / PIE forwarding in the SoC +/* Add an L2 nexthop entry for the L3 routing system / PIE forwarding in the SoC * Use VID and MAC in rtl838x_l2_entry to identify either a free slot in the L2 hash table * or mark an existing entry as a nexthop by setting it's nexthop bit * Called from the L3 layer @@ -655,8 +651,7 @@ int rtl83xx_l2_nexthop_add(struct rtl838x_switch_priv *priv, struct rtl83xx_next return 0; } -/* - * Removes a Layer 2 next hop entry in the forwarding database +/* Removes a Layer 2 next hop entry in the forwarding database * If it was static, the entire entry is removed, otherwise the nexthop bit is cleared * and we wait until the entry ages out */ @@ -733,11 +728,11 @@ static int rtl83xx_handle_changeupper(struct rtl838x_switch_priv *priv, out: mutex_unlock(&priv->reg_mutex); + return 0; } -/* - * Is the lower network device a DSA slave network device of our RTL930X-switch? +/* Is the lower network device a DSA slave network device of our RTL930X-switch? * Unfortunately we cannot just follow dev->dsa_prt as this is only set for the * DSA master device. */ @@ -757,6 +752,7 @@ int rtl83xx_port_is_under(const struct net_device * dev, struct rtl838x_switch_p if (priv->ports[i].dp->slave == dev) return i; } + return -EINVAL; } @@ -791,9 +787,7 @@ const static struct rhashtable_params route_ht_params = { .head_offset = offsetof(struct rtl83xx_route, linkage), }; -/* - * Updates an L3 next hop entry in the ROUTING table - */ +/* Updates an L3 next hop entry in the ROUTING table */ static int rtl83xx_l3_nexthop_update(struct rtl838x_switch_priv *priv, __be32 ip_addr, u64 mac) { struct rtl83xx_route *r; @@ -865,6 +859,7 @@ static int rtl83xx_l3_nexthop_update(struct rtl838x_switch_priv *priv, __be32 i } } rcu_read_unlock(); + return 0; } @@ -895,6 +890,7 @@ static int rtl83xx_port_ipv4_resolve(struct rtl838x_switch_priv *priv, } neigh_release(n); + return err; } @@ -970,6 +966,7 @@ static struct rtl83xx_route *rtl83xx_route_alloc(struct rtl838x_switch_priv *pri out_free: kfree(r); + return NULL; } @@ -991,7 +988,8 @@ static struct rtl83xx_route *rtl83xx_host_route_alloc(struct rtl838x_switch_priv } /* We require a unique route ID irrespective of whether it is a prefix or host - * route (on RTL93xx) as we use this ID to associate a DMAC and next-hop entry */ + * route (on RTL93xx) as we use this ID to associate a DMAC and next-hop entry + */ r->id = idx + MAX_ROUTES; r->gw_ip = ip; @@ -1013,6 +1011,7 @@ static struct rtl83xx_route *rtl83xx_host_route_alloc(struct rtl838x_switch_priv out_free: kfree(r); + return NULL; } @@ -1082,8 +1081,7 @@ static int rtl83xx_fib4_del(struct rtl838x_switch_priv *priv, return 0; } -/* - * On the RTL93xx, an L3 termination endpoint MAC address on which the router waits +/* On the RTL93xx, an L3 termination endpoint MAC address on which the router waits * for packets to be routed needs to be allocated. */ static int rtl83xx_alloc_router_mac(struct rtl838x_switch_priv *priv, u64 mac) @@ -1269,6 +1267,7 @@ static int rtl83xx_fib6_add(struct rtl838x_switch_priv *priv, { pr_debug("In %s\n", __func__); // nh->fib_nh_flags |= RTNH_F_OFFLOAD; + return 0; } @@ -1557,14 +1556,14 @@ static int __init rtl83xx_sw_probe(struct platform_device *pdev) */ return err; } + err = dsa_register_switch(priv->ds); if (err) { dev_err(dev, "Error registering switch: %d\n", err); return err; } - /* - * dsa_to_port returns dsa_port from the port list in + /* dsa_to_port returns dsa_port from the port list in * dsa_switch_tree, the tree is built when the switch * is registered by dsa_register_switch */ @@ -1582,19 +1581,19 @@ static int __init rtl83xx_sw_probe(struct platform_device *pdev) switch (priv->family_id) { case RTL8380_FAMILY_ID: err = request_irq(priv->link_state_irq, rtl838x_switch_irq, - IRQF_SHARED, "rtl838x-link-state", priv->ds); + IRQF_SHARED, "rtl838x-link-state", priv->ds); break; case RTL8390_FAMILY_ID: err = request_irq(priv->link_state_irq, rtl839x_switch_irq, - IRQF_SHARED, "rtl839x-link-state", priv->ds); + IRQF_SHARED, "rtl839x-link-state", priv->ds); break; case RTL9300_FAMILY_ID: err = request_irq(priv->link_state_irq, rtl930x_switch_irq, - IRQF_SHARED, "rtl930x-link-state", priv->ds); + IRQF_SHARED, "rtl930x-link-state", priv->ds); break; case RTL9310_FAMILY_ID: err = request_irq(priv->link_state_irq, rtl931x_switch_irq, - IRQF_SHARED, "rtl931x-link-state", priv->ds); + IRQF_SHARED, "rtl931x-link-state", priv->ds); break; } if (err) { @@ -1616,9 +1615,7 @@ static int __init rtl83xx_sw_probe(struct platform_device *pdev) for (i = 0; i < 4; i++) priv->mirror_group_ports[i] = -1; - /* - * Register netdevice event callback to catch changes in link aggregation groups - */ + /* Register netdevice event callback to catch changes in link aggregation groups */ priv->nb.notifier_call = rtl83xx_netdevice_event; if (register_netdevice_notifier(&priv->nb)) { priv->nb.notifier_call = NULL; @@ -1629,8 +1626,7 @@ static int __init rtl83xx_sw_probe(struct platform_device *pdev) // Initialize hash table for L3 routing rhltable_init(&priv->routes, &route_ht_params); - /* - * Register netevent notifier callback to catch notifications about neighboring + /* Register netevent notifier callback to catch notifications about neighboring * changes to update nexthop entries for L3 routing. */ priv->ne_nb.notifier_call = rtl83xx_netevent_event; @@ -1642,8 +1638,7 @@ static int __init rtl83xx_sw_probe(struct platform_device *pdev) priv->fib_nb.notifier_call = rtl83xx_fib_event; - /* - * Register Forwarding Information Base notifier to offload routes where + /* Register Forwarding Information Base notifier to offload routes where * where possible * Only FIBs pointing to our own netdevs are programmed into * the device, so no need to pass a callback. @@ -1680,6 +1675,7 @@ static int rtl83xx_sw_remove(struct platform_device *pdev) { // TODO: pr_debug("Removing platform driver for rtl83xx-sw\n"); + return 0; } diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/debugfs.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/debugfs.c index 3c935f629a..bc7b3f1461 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/debugfs.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/debugfs.c @@ -2,8 +2,8 @@ #include #include - #include + #include "rtl83xx.h" #define RTL838X_DRIVER_NAME "rtl838x" diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c index 3e71813112..f6e1f55a20 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c @@ -2,14 +2,12 @@ #include #include - #include -#include "rtl83xx.h" +#include "rtl83xx.h" extern struct rtl83xx_soc_info soc_info; - static void rtl83xx_init_stats(struct rtl838x_switch_priv *priv) { mutex_lock(&priv->reg_mutex); @@ -111,9 +109,7 @@ static enum dsa_tag_protocol rtl83xx_get_tag_protocol(struct dsa_switch *ds, return DSA_TAG_PROTO_TRAILER; } -/* - * Initialize all VLANS - */ +/* Initialize all VLANS */ static void rtl83xx_vlan_setup(struct rtl838x_switch_priv *priv) { struct rtl838x_vlan_info info; @@ -218,8 +214,7 @@ static int rtl83xx_setup(struct dsa_switch *ds) rtl83xx_port_set_salrn(priv, priv->cpu_port, false); ds->assisted_learning_on_cpu_port = true; - /* - * Make sure all frames sent to the switch's MAC are trapped to the CPU-port + /* Make sure all frames sent to the switch's MAC are trapped to the CPU-port * 0: FWD, 1: DROP, 2: TRAP2CPU */ if (priv->family_id == RTL8380_FAMILY_ID) @@ -414,8 +409,8 @@ static void rtl93xx_phylink_validate(struct dsa_switch *ds, int port, } // Internal phys of the RTL93xx family provide 10G - if (priv->ports[port].phy_is_integrated - && state->interface == PHY_INTERFACE_MODE_1000BASEX) { + if (priv->ports[port].phy_is_integrated && + state->interface == PHY_INTERFACE_MODE_1000BASEX) { phylink_set(mask, 1000baseX_Full); } else if (priv->ports[port].phy_is_integrated) { phylink_set(mask, 1000baseX_Full); @@ -492,6 +487,7 @@ static int rtl83xx_phylink_mac_link_state(struct dsa_switch *ds, int port, state->pause |= MLO_PAUSE_RX; if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port)) state->pause |= MLO_PAUSE_TX; + return 1; } @@ -506,8 +502,7 @@ static int rtl93xx_phylink_mac_link_state(struct dsa_switch *ds, int port, if (port < 0 || port > priv->cpu_port) return -EINVAL; - /* - * On the RTL9300 for at least the RTL8226B PHY, the MAC-side link + /* On the RTL9300 for at least the RTL8226B PHY, the MAC-side link * state needs to be read twice in order to read a correct result. * This would not be necessary for ports connected e.g. to RTL8218D * PHYs. @@ -574,6 +569,7 @@ static int rtl93xx_phylink_mac_link_state(struct dsa_switch *ds, int port, state->pause |= MLO_PAUSE_RX; if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port)) state->pause |= MLO_PAUSE_TX; + return 1; } @@ -988,7 +984,7 @@ static int rtl83xx_mc_group_alloc(struct rtl838x_switch_priv *priv, int port) set_bit(mc_group, priv->mc_group_bm); mc_group++; // We cannot use group 0, as this is used for lookup miss flooding - portmask = BIT_ULL(port) | BIT_ULL(priv->cpu_port); + portmask = BIT_ULL(port) | BIT_ULL(priv->cpu_port); priv->r->write_mcast_pmask(mc_group, portmask); return mc_group; @@ -1134,6 +1130,7 @@ static int rtl83xx_set_mac_eee(struct dsa_switch *ds, int port, pr_info("Enabled EEE for port %d\n", port); else pr_info("Disabled EEE for port %d\n", port); + return 0; } @@ -1158,8 +1155,9 @@ static int rtl93xx_get_mac_eee(struct dsa_switch *ds, int port, { struct rtl838x_switch_priv *priv = ds->priv; - e->supported = SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full - | SUPPORTED_2500baseX_Full; + e->supported = SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_2500baseX_Full; priv->r->eee_port_ability(priv, e, port); @@ -1175,6 +1173,7 @@ static int rtl83xx_set_ageing_time(struct dsa_switch *ds, unsigned int msec) struct rtl838x_switch_priv *priv = ds->priv; priv->r->set_ageing_time(msec); + return 0; } @@ -1306,7 +1305,7 @@ void rtl83xx_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) case BR_STATE_LEARNING: /* 2 */ port_state[index] |= (2 << bit); break; - case BR_STATE_FORWARDING: /* 3*/ + case BR_STATE_FORWARDING: /* 3 */ port_state[index] |= (3 << bit); default: break; @@ -1463,9 +1462,9 @@ static int rtl83xx_vlan_add(struct dsa_switch *ds, int port, priv->r->vlan_port_pvid_set(port, PBVLAN_TYPE_INNER, vlan->vid); priv->r->vlan_port_pvid_set(port, PBVLAN_TYPE_OUTER, vlan->vid); priv->r->vlan_port_pvidmode_set(port, PBVLAN_TYPE_INNER, - PBVLAN_MODE_UNTAG_AND_PRITAG); + PBVLAN_MODE_UNTAG_AND_PRITAG); priv->r->vlan_port_pvidmode_set(port, PBVLAN_TYPE_OUTER, - PBVLAN_MODE_UNTAG_AND_PRITAG); + PBVLAN_MODE_UNTAG_AND_PRITAG); priv->ports[port].pvid = vlan->vid; } @@ -1523,9 +1522,9 @@ static int rtl83xx_vlan_del(struct dsa_switch *ds, int port, priv->r->vlan_port_pvid_set(port, PBVLAN_TYPE_INNER, 0); priv->r->vlan_port_pvid_set(port, PBVLAN_TYPE_OUTER, 0); priv->r->vlan_port_pvidmode_set(port, PBVLAN_TYPE_INNER, - PBVLAN_MODE_UNTAG_AND_PRITAG); + PBVLAN_MODE_UNTAG_AND_PRITAG); priv->r->vlan_port_pvidmode_set(port, PBVLAN_TYPE_OUTER, - PBVLAN_MODE_UNTAG_AND_PRITAG); + PBVLAN_MODE_UNTAG_AND_PRITAG); } /* Get port memberships of this vlan */ priv->r->vlan_tables_read(vlan->vid, &info); @@ -1576,8 +1575,7 @@ static void rtl83xx_setup_l2_mc_entry(struct rtl838x_l2_entry *e, int vid, u64 m u64_to_ether_addr(mac, e->mac); } -/* - * Uses the seed to identify a hash bucket in the L2 using the derived hash key and then loops +/* Uses the seed to identify a hash bucket in the L2 using the derived hash key and then loops * over the entries in the bucket until either a matching entry is found or an empty slot * Returns the filled in rtl838x_l2_entry and the index in the bucket when an entry was found * when an empty slot was found and must exist is false, the index of the slot is returned @@ -1606,8 +1604,7 @@ static int rtl83xx_find_l2_hash_entry(struct rtl838x_switch_priv *priv, u64 seed return idx; } -/* - * Uses the seed to identify an entry in the CAM by looping over all its entries +/* Uses the seed to identify an entry in the CAM by looping over all its entries * Returns the filled in rtl838x_l2_entry and the index in the CAM when an entry was found * when an empty slot was found the index of the slot is returned * when no slots are available returns -1 @@ -1630,6 +1627,7 @@ static int rtl83xx_find_l2_cam_entry(struct rtl838x_switch_priv *priv, u64 seed, break; } } + return idx; } @@ -1668,8 +1666,10 @@ static int rtl83xx_port_fdb_add(struct dsa_switch *ds, int port, } err = -ENOTSUPP; + out: mutex_unlock(&priv->reg_mutex); + return err; } @@ -1703,8 +1703,10 @@ static int rtl83xx_port_fdb_del(struct dsa_switch *ds, int port, goto out; } err = -ENOENT; + out: mutex_unlock(&priv->reg_mutex); + return err; } @@ -1741,6 +1743,7 @@ static int rtl83xx_port_fdb_dump(struct dsa_switch *ds, int port, } mutex_unlock(&priv->reg_mutex); + return 0; } @@ -1810,6 +1813,7 @@ static int rtl83xx_port_mdb_add(struct dsa_switch *ds, int port, } err = -ENOTSUPP; + out: mutex_unlock(&priv->reg_mutex); if (err) @@ -1862,8 +1866,10 @@ int rtl83xx_port_mdb_del(struct dsa_switch *ds, int port, goto out; } // TODO: Re-enable with a newer kernel: err = -ENOENT; + out: mutex_unlock(&priv->reg_mutex); + return err; } @@ -1874,7 +1880,7 @@ static int rtl83xx_port_mirror_add(struct dsa_switch *ds, int port, /* We support 4 mirror groups, one destination port per group */ int group; struct rtl838x_switch_priv *priv = ds->priv; - int ctrl_reg, dpm_reg, spm_reg; + int ctrl_reg, dpm_reg, spm_reg; pr_debug("In %s\n", __func__); @@ -1923,6 +1929,7 @@ static int rtl83xx_port_mirror_add(struct dsa_switch *ds, int port, priv->mirror_group_ports[group] = mirror->to_local_port; mutex_unlock(&priv->reg_mutex); + return 0; } @@ -2054,8 +2061,8 @@ static int rtl83xx_port_lag_join(struct dsa_switch *ds, int port, if (!priv->lag_devs[i]) priv->lag_devs[i] = lag; - if (priv->lag_primary[i]==-1) { - priv->lag_primary[i]=port; + if (priv->lag_primary[i] == -1) { + priv->lag_primary[i] = port; } else priv->is_lagmember[port] = 1; @@ -2070,8 +2077,8 @@ static int rtl83xx_port_lag_join(struct dsa_switch *ds, int port, out: mutex_unlock(&priv->reg_mutex); - return err; + return err; } static int rtl83xx_port_lag_leave(struct dsa_switch *ds, int port, @@ -2081,7 +2088,7 @@ static int rtl83xx_port_lag_leave(struct dsa_switch *ds, int port, struct rtl838x_switch_priv *priv = ds->priv; mutex_lock(&priv->reg_mutex); - for (i=0;in_lags;i++) { + for (i = 0; i < priv->n_lags; i++) { if (priv->lags_port_members[i] & BIT_ULL(port)) { group = i; break; @@ -2122,8 +2129,9 @@ int dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg) u32 offset = 0; struct rtl838x_switch_priv *priv = ds->priv; - if (phy_addr >= 24 && phy_addr <= 27 - && priv->ports[24].phy == PHY_RTL838X_SDS) { + if ((phy_addr >= 24) && + (phy_addr <= 27) && + (priv->ports[24].phy == PHY_RTL838X_SDS)) { if (phy_addr == 26) offset = 0x100; val = sw_r32(RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2)) & 0xffff; @@ -2139,8 +2147,9 @@ int dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val) u32 offset = 0; struct rtl838x_switch_priv *priv = ds->priv; - if (phy_addr >= 24 && phy_addr <= 27 - && priv->ports[24].phy == PHY_RTL838X_SDS) { + if ((phy_addr >= 24) && + (phy_addr <= 27) && + (priv->ports[24].phy == PHY_RTL838X_SDS)) { if (phy_addr == 26) offset = 0x100; sw_w32(val, RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2)); diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/qos.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/qos.c index 2fc8d37f3e..8a2621fb28 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/qos.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/qos.c @@ -2,8 +2,8 @@ #include #include - #include + #include "rtl83xx.h" static struct rtl838x_switch_priv *switch_priv; @@ -20,28 +20,28 @@ int dot1p_priority_remapping[] = {0, 1, 2, 3, 4, 5, 6, 7}; static void rtl839x_read_scheduling_table(int port) { - u32 cmd = 1 << 9 /* Execute cmd */ - | 0 << 8 /* Read */ - | 0 << 6 /* Table type 0b00 */ - | (port & 0x3f); + u32 cmd = 1 << 9 | /* Execute cmd */ + 0 << 8 | /* Read */ + 0 << 6 | /* Table type 0b00 */ + (port & 0x3f); rtl839x_exec_tbl2_cmd(cmd); } static void rtl839x_write_scheduling_table(int port) { - u32 cmd = 1 << 9 /* Execute cmd */ - | 1 << 8 /* Write */ - | 0 << 6 /* Table type 0b00 */ - | (port & 0x3f); + u32 cmd = 1 << 9 | /* Execute cmd */ + 1 << 8 | /* Write */ + 0 << 6 | /* Table type 0b00 */ + (port & 0x3f); rtl839x_exec_tbl2_cmd(cmd); } static void rtl839x_read_out_q_table(int port) { - u32 cmd = 1 << 9 /* Execute cmd */ - | 0 << 8 /* Read */ - | 2 << 6 /* Table type 0b10 */ - | (port & 0x3f); + u32 cmd = 1 << 9 | /* Execute cmd */ + 0 << 8 | /* Read */ + 2 << 6 | /* Table type 0b10 */ + (port & 0x3f); rtl839x_exec_tbl2_cmd(cmd); } @@ -56,12 +56,10 @@ static void rtl838x_storm_enable(struct rtl838x_switch_priv *priv, int port, boo u32 rtl838x_get_egress_rate(struct rtl838x_switch_priv *priv, int port) { - u32 rate; - if (port > priv->cpu_port) return 0; - rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)) & 0x3fff; - return rate; + + return sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)) & 0x3fff; } /* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */ @@ -86,8 +84,10 @@ void rtl838x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port, { if (port > priv->cpu_port) return; + if (queue > 7) return; + sw_w32(rate, RTL838X_SCHED_Q_EGR_RATE_CTRL(port, queue)); } @@ -118,7 +118,8 @@ static void rtl838x_rate_control_init(struct rtl838x_switch_priv *priv) sw_w32_mask(0xffff, 0x800, RTL838X_SCHED_LB_THR); /* Enable storm control on all ports with a PHY and limit rates, - * for UC and MC for both known and unknown addresses */ + * for UC and MC for both known and unknown addresses + */ for (i = 0; i < priv->cpu_port; i++) { if (priv->ports[i].phy) { sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_UC(i)); @@ -180,7 +181,7 @@ int rtl839x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate sw_w32_mask(0xfff << 20, rate << 20, RTL839X_TBL_ACCESS_DATA_2(8)); rtl839x_write_scheduling_table(port); - + mutex_unlock(&priv->reg_mutex); return old_rate; @@ -317,7 +318,7 @@ void rtl839x_setup_prio2queue_matrix(int *min_queues) /* Sets the CPU queue depending on the internal priority of a packet */ void rtl83xx_setup_prio2queue_cpu_matrix(int *max_queues) { - int reg = soc_info.family == RTL8380_FAMILY_ID ? RTL838X_QM_PKT2CPU_INTPRI_MAP + int reg = soc_info.family == RTL8380_FAMILY_ID ? RTL838X_QM_PKT2CPU_INTPRI_MAP : RTL839X_QM_PKT2CPU_INTPRI_MAP; int i; u32 v; @@ -351,7 +352,6 @@ void rtl83xx_set_ingress_priority(int port, int priority) sw_w32(priority << ((port % 10) *3), RTL838X_PRI_SEL_PORT_PRI(port)); else sw_w32(priority << ((port % 10) *3), RTL839X_PRI_SEL_PORT_PRI(port)); - } int rtl839x_get_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port) @@ -367,6 +367,7 @@ int rtl839x_get_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port) if (v & BIT(19)) return WEIGHTED_ROUND_ROBIN; + return WEIGHTED_FAIR_QUEUE; } @@ -386,7 +387,7 @@ void rtl839x_set_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port // Get current OAM state oam_port_state = sw_r32(RTL839X_OAM_PORT_ACT_CTRL(port)); - + // Disable OAM to block traffice v = sw_r32(RTL839X_OAM_CTRL); sw_w32_mask(0, 1, RTL839X_OAM_CTRL); @@ -397,7 +398,7 @@ void rtl839x_set_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port // Set port egress rate to unlimited egress_rate = rtl839x_set_egress_rate(priv, port, 0xFFFFF); - + // Wait until the egress used page count of that port is 0 i = 0; do { @@ -528,7 +529,7 @@ void rtl839x_config_qos(void) for (p = 0; p < 8; p++) v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3); sw_w32(v, RTL839X_PRI_SEL_IPRI_REMAP); - + /* Configure Drop Precedence for Drop Eligible Indicator (DEI) * Index 0: 0 * Index 1: 2 @@ -572,5 +573,4 @@ void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv) rtl838x_rate_control_init(priv); else if (priv->family_id == RTL8390_FAMILY_ID) rtl839x_rate_control_init(priv); - } diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c index 9ce5098979..bd24b4e0ac 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c @@ -75,8 +75,7 @@ enum template_field_id { TEMPLATE_FIELD_FLOW_LABEL = 41, }; -/* - * The RTL838X SoCs use 5 fixed templates with definitions for which data fields are to +/* The RTL838X SoCs use 5 fixed templates with definitions for which data fields are to * be copied from the Ethernet Frame header into the 12 User-definable fields of the Packet * Inspection Engine's buffer. The following defines the field contents for each of the fixed * templates. Additionally, 3 user-definable templates can be set up via the definitions @@ -216,8 +215,7 @@ static u64 rtl838x_l2_hash_seed(u64 mac, u32 vid) return mac << 12 | vid; } -/* - * Applies the same hash algorithm as the one used currently by the ASIC to the seed +/* Applies the same hash algorithm as the one used currently by the ASIC to the seed * and returns a key into the L2 hash table */ static u32 rtl838x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) @@ -237,9 +235,9 @@ static u32 rtl838x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) h = h1 ^ h2 ^ h3 ^ ((seed >> 55) & 0x1ff); h ^= ((seed >> 22) & 0x7ff) ^ (seed & 0x7ff); } else { - h = ((seed >> 55) & 0x1ff) ^ ((seed >> 44) & 0x7ff) - ^ ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff) - ^ ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff); + h = ((seed >> 55) & 0x1ff) ^ ((seed >> 44) & 0x7ff) ^ + ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff) ^ + ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff); } return h; @@ -275,9 +273,7 @@ inline static int rtl838x_trk_mbr_ctr(int group) return RTL838X_TRK_MBR_CTR + (group << 2); } -/* - * Fills an L2 entry structure from the SoC registers - */ +/* Fills an L2 entry structure from the SoC registers */ static void rtl838x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) { /* Table contains different entry types, we need to identify the right one: @@ -316,9 +312,10 @@ static void rtl838x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) } e->age = (r[0] >> 17) & 0x3; e->valid = true; - + /* A valid entry has one of mutli-cast, aging, sa/da-blocking, - * next-hop or static entry bit set */ + * next-hop or static entry bit set + */ if (!(r[0] & 0x007c0000) && !(r[1] & 0xd0000000)) e->valid = false; else @@ -341,9 +338,7 @@ static void rtl838x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) e->type = IP6_MULTICAST; } -/* - * Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry - */ +/* Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry */ static void rtl838x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) { u64 mac = ether_addr_to_u64(e->mac); @@ -389,21 +384,19 @@ static void rtl838x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) } } -/* - * Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table +/* Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table * hash is the id of the bucket and pos is the position of the entry in that bucket * The data read from the SoC is filled into rtl838x_l2_entry */ static u64 rtl838x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e) { - u64 entry; u32 r[3]; struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 0); // Access L2 Table 0 u32 idx = (0 << 14) | (hash << 2) | pos; // Search SRAM, with hash and at pos in bucket int i; rtl_table_read(q, idx); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) r[i] = sw_r32(rtl_table_data(q, i)); rtl_table_release(q); @@ -412,8 +405,7 @@ static u64 rtl838x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2 if (!e->valid) return 0; - entry = (((u64) r[1]) << 32) | (r[2]); // mac and vid concatenated as hash seed - return entry; + return (((u64) r[1]) << 32) | (r[2]); // mac and vid concatenated as hash seed } static void rtl838x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e) @@ -426,7 +418,7 @@ static void rtl838x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_ rtl838x_fill_l2_row(r, e); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) sw_w32(r[i], rtl_table_data(q, i)); rtl_table_write(q, idx); @@ -435,13 +427,12 @@ static void rtl838x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_ static u64 rtl838x_read_cam(int idx, struct rtl838x_l2_entry *e) { - u64 entry; u32 r[3]; struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 1); // Access L2 Table 1 int i; rtl_table_read(q, idx); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) r[i] = sw_r32(rtl_table_data(q, i)); rtl_table_release(q); @@ -453,8 +444,7 @@ static u64 rtl838x_read_cam(int idx, struct rtl838x_l2_entry *e) pr_debug("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); // Return MAC with concatenated VID ac concatenated ID - entry = (((u64) r[1]) << 32) | r[2]; - return entry; + return (((u64) r[1]) << 32) | r[2]; } static void rtl838x_write_cam(int idx, struct rtl838x_l2_entry *e) @@ -465,7 +455,7 @@ static void rtl838x_write_cam(int idx, struct rtl838x_l2_entry *e) rtl838x_fill_l2_row(r, e); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) sw_w32(r[i], rtl_table_data(q, i)); rtl_table_write(q, idx); @@ -539,8 +529,7 @@ static void rtl838x_enable_learning(int port, bool enable) static void rtl838x_enable_flood(int port, bool enable) { - /* - * 0: Forward + /* 0: Forward * 1: Disable * 2: to CPU * 3: Copy to CPU @@ -562,10 +551,10 @@ static void rtl838x_enable_bcast_flood(int port, bool enable) static void rtl838x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) { int i; - u32 cmd = 1 << 15 /* Execute cmd */ - | 1 << 14 /* Read */ - | 2 << 12 /* Table type 0b10 */ - | (msti & 0xfff); + u32 cmd = 1 << 15 | /* Execute cmd */ + 1 << 14 | /* Read */ + 2 << 12 | /* Table type 0b10 */ + (msti & 0xfff); priv->r->exec_tbl0_cmd(cmd); for (i = 0; i < 2; i++) @@ -575,10 +564,10 @@ static void rtl838x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port static void rtl838x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) { int i; - u32 cmd = 1 << 15 /* Execute cmd */ - | 0 << 14 /* Write */ - | 2 << 12 /* Table type 0b10 */ - | (msti & 0xfff); + u32 cmd = 1 << 15 | /* Execute cmd */ + 0 << 14 | /* Write */ + 2 << 12 | /* Table type 0b10 */ + (msti & 0xfff); for (i = 0; i < 2; i++) sw_w32(port_state[i], priv->r->tbl_access_data_0(i)); @@ -605,9 +594,7 @@ void rtl838x_traffic_disable(int source, int dest) rtl838x_mask_port_reg(BIT(dest), 0, rtl838x_port_iso_ctrl(source)); } -/* - * Enables or disables the EEE/EEEP capability of a port - */ +/* Enables or disables the EEE/EEEP capability of a port */ static void rtl838x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enable) { u32 v; @@ -634,9 +621,7 @@ static void rtl838x_port_eee_set(struct rtl838x_switch_priv *priv, int port, boo } -/* - * Get EEE own capabilities and negotiation result - */ +/* Get EEE own capabilities and negotiation result */ static int rtl838x_eee_port_ability(struct rtl838x_switch_priv *priv, struct ethtool_eee *e, int port) { @@ -729,8 +714,7 @@ static void rtl838x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_fro mutex_unlock(&priv->reg_mutex); } -/* - * Reads the intermediate representation of the templated match-fields of the +/* Reads the intermediate representation of the templated match-fields of the * PIE rule in the pie_rule structure and fills in the raw data fields in the * raw register space r[]. * The register space configuration size is identical for the RTL8380/90 and RTL9300, @@ -826,7 +810,6 @@ static void rtl838x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data_m = pr->sip_m >> 16; } break; - case TEMPLATE_FIELD_SIP2: case TEMPLATE_FIELD_SIP3: case TEMPLATE_FIELD_SIP4: @@ -836,7 +819,6 @@ static void rtl838x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; break; - case TEMPLATE_FIELD_DIP0: if (pr->is_ipv6) { data = pr->dip6.s6_addr16[7]; @@ -846,7 +828,6 @@ static void rtl838x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data_m = pr->dip_m; } break; - case TEMPLATE_FIELD_DIP1: if (pr->is_ipv6) { data = pr->dip6.s6_addr16[6]; @@ -856,7 +837,6 @@ static void rtl838x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data_m = pr->dip_m >> 16; } break; - case TEMPLATE_FIELD_DIP2: case TEMPLATE_FIELD_DIP3: case TEMPLATE_FIELD_DIP4: @@ -866,7 +846,6 @@ static void rtl838x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; break; - case TEMPLATE_FIELD_IP_TOS_PROTO: data = pr->tos_proto; data_m = pr->tos_proto_m; @@ -897,8 +876,7 @@ static void rtl838x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ } } -/* - * Creates the intermediate representation of the templated match-fields of the +/* Creates the intermediate representation of the templated match-fields of the * PIE rule in the pie_rule structure by reading the raw data fields in the * raw register space r[]. * The register space configuration size is identical for the RTL8380/90 and RTL9300, @@ -1002,7 +980,6 @@ static void rtl838x_read_pie_templated(u32 r[], struct pie_rule *pr, enum templa case TEMPLATE_FIELD_SIP6: case TEMPLATE_FIELD_SIP7: break; - case TEMPLATE_FIELD_DIP0: pr->dip = data; pr->dip_m = data_m; @@ -1434,13 +1411,17 @@ static int rtl838x_pie_verify_template(struct rtl838x_switch_priv *priv, return -1; if (pr->is_ipv6) { - if ((pr->sip6_m.s6_addr32[0] || pr->sip6_m.s6_addr32[1] - || pr->sip6_m.s6_addr32[2] || pr->sip6_m.s6_addr32[3]) - && !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) + if ((pr->sip6_m.s6_addr32[0] || + pr->sip6_m.s6_addr32[1] || + pr->sip6_m.s6_addr32[2] || + pr->sip6_m.s6_addr32[3]) && + !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) return -1; - if ((pr->dip6_m.s6_addr32[0] || pr->dip6_m.s6_addr32[1] - || pr->dip6_m.s6_addr32[2] || pr->dip6_m.s6_addr32[3]) - && !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) + if ((pr->dip6_m.s6_addr32[0] || + pr->dip6_m.s6_addr32[1] || + pr->dip6_m.s6_addr32[2] || + pr->dip6_m.s6_addr32[3]) && + !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) return -1; } @@ -1497,6 +1478,7 @@ static int rtl838x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rul rtl838x_pie_rule_write(priv, idx, pr); mutex_unlock(&priv->pie_mutex); + return 0; } @@ -1508,8 +1490,7 @@ static void rtl838x_pie_rule_rm(struct rtl838x_switch_priv *priv, struct pie_rul clear_bit(idx, priv->pie_use_bm); } -/* - * Initializes the Packet Inspection Engine: +/* Initializes the Packet Inspection Engine: * powers it up, enables default matching templates for all blocks * and clears all rules possibly installed by u-boot */ @@ -1695,17 +1676,17 @@ void rtl838x_set_receive_management_action(int port, rma_ctrl_t type, action_typ case BPDU: sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), RTL838X_RMA_BPDU_CTRL + ((port >> 4) << 2)); - break; + break; case PTP: sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), RTL838X_RMA_PTP_CTRL + ((port >> 4) << 2)); - break; + break; case LLTP: sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), RTL838X_RMA_LLTP_CTRL + ((port >> 4) << 2)); - break; + break; default: - break; + break; } } @@ -1776,7 +1757,7 @@ const struct rtl838x_reg rtl838x_reg = { .init_eee = rtl838x_init_eee, .port_eee_set = rtl838x_port_eee_set, .eee_port_ability = rtl838x_eee_port_ability, - .l2_hash_seed = rtl838x_l2_hash_seed, + .l2_hash_seed = rtl838x_l2_hash_seed, .l2_hash_key = rtl838x_l2_hash_key, .read_mcast_pmask = rtl838x_read_mcast_pmask, .write_mcast_pmask = rtl838x_write_mcast_pmask, @@ -1816,6 +1797,7 @@ irqreturn_t rtl838x_switch_irq(int irq, void *dev_id) dsa_port_phylink_mac_change(ds, i, false); } } + return IRQ_HANDLED; } @@ -1832,11 +1814,10 @@ int rtl838x_smi_wait_op(int timeout) return ret; } -/* - * Reads a register in a page from the PHY - */ +/* Reads a register in a page from the PHY */ int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val) { + int err = -ETIMEDOUT; u32 v; u32 park_page; @@ -1865,19 +1846,18 @@ int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val) *val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff; - mutex_unlock(&smi_lock); - return 0; + err = 0; timeout: mutex_unlock(&smi_lock); + return -ETIMEDOUT; } -/* - * Write to a register in a page of the PHY - */ +/* Write to a register in a page of the PHY */ int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val) { + int err = -ETIMEDOUT; u32 v; u32 park_page; @@ -1902,19 +1882,18 @@ int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val) if (rtl838x_smi_wait_op(100000)) goto timeout; - mutex_unlock(&smi_lock); - return 0; + err = 0; timeout: mutex_unlock(&smi_lock); + return -ETIMEDOUT; } -/* - * Read an mmd register of a PHY - */ +/* Read an mmd register of a PHY */ int rtl838x_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val) { + int err = -ETIMEDOUT; u32 v; mutex_lock(&smi_lock); @@ -1939,19 +1918,18 @@ int rtl838x_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val) *val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff; - mutex_unlock(&smi_lock); - return 0; + err = 0; timeout: mutex_unlock(&smi_lock); - return -ETIMEDOUT; + + return err; } -/* - * Write to an mmd register of a PHY - */ +/* Write to an mmd register of a PHY */ int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val) { + int err = -ETIMEDOUT; u32 v; pr_debug("MMD write: port %d, dev %d, reg %d, val %x\n", port, addr, reg, val); @@ -1975,12 +1953,11 @@ int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val) if (rtl838x_smi_wait_op(100000)) goto timeout; - mutex_unlock(&smi_lock); - return 0; + err = 0; timeout: mutex_unlock(&smi_lock); - return -ETIMEDOUT; + return err; } void rtl8380_get_version(struct rtl838x_switch_priv *priv) diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h index 19049e4c95..68a4675e11 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h @@ -5,9 +5,7 @@ #include -/* - * Register definition - */ +/* Register definition */ #define RTL838X_MAC_PORT_CTRL(port) (0xd560 + (((port) << 7))) #define RTL839X_MAC_PORT_CTRL(port) (0x8004 + (((port) << 7))) #define RTL930X_MAC_PORT_CTRL(port) (0x3260 + (((port) << 6))) @@ -398,17 +396,16 @@ #define RTL839X_SPCL_TRAP_SWITCH_IPV4_ADDR_CTRL (0x106C) #define RTL839X_SPCL_TRAP_CRC_CTRL (0x1070) /* special port action controls */ -/* - values: - 0 = FORWARD (default) - 1 = DROP - 2 = TRAP2CPU - 3 = FLOOD IN ALL PORT - - Register encoding. - offset = CTRL + (port >> 4) << 2 - value/mask = 3 << ((port&0xF) << 1) -*/ +/* values: + * 0 = FORWARD (default) + * 1 = DROP + * 2 = TRAP2CPU + * 3 = FLOOD IN ALL PORT + * + * Register encoding. + * offset = CTRL + (port >> 4) << 2 + * value/mask = 3 << ((port & 0xF) << 1) + */ typedef enum { BPDU = 0, @@ -429,17 +426,17 @@ typedef enum { COPY2CPU, } action_type_t; -#define RTL838X_RMA_BPDU_CTRL (0x4330) +#define RTL838X_RMA_BPDU_CTRL (0x4330) #define RTL839X_RMA_BPDU_CTRL (0x122C) #define RTL930X_RMA_BPDU_CTRL (0x9E7C) #define RTL931X_RMA_BPDU_CTRL (0x881C) -#define RTL838X_RMA_PTP_CTRL (0x4338) +#define RTL838X_RMA_PTP_CTRL (0x4338) #define RTL839X_RMA_PTP_CTRL (0x123C) #define RTL930X_RMA_PTP_CTRL (0x9E88) #define RTL931X_RMA_PTP_CTRL (0x8834) -#define RTL838X_RMA_LLTP_CTRL (0x4340) +#define RTL838X_RMA_LLTP_CTRL (0x4340) #define RTL839X_RMA_LLTP_CTRL (0x124C) #define RTL930X_RMA_LLTP_CTRL (0x9EFC) #define RTL931X_RMA_LLTP_CTRL (0x8918) @@ -871,8 +868,7 @@ struct rtl838x_l3_intf { u8 ip6_pbr_icmp_redirect; }; -/* - * An entry in the RTL93XX SoC's ROUTER_MAC tables setting up a termination point +/* An entry in the RTL93XX SoC's ROUTER_MAC tables setting up a termination point * for the L3 routing system. Packets arriving and matching an entry in this table * will be considered for routing. * Mask fields state whether the corresponding data fields matter for matching diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c index 986a4b5f45..6fac8bd674 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only #include + #include "rtl83xx.h" #define RTL839X_VLAN_PORT_TAG_STS_UNTAG 0x0 @@ -228,8 +229,7 @@ static void rtl839x_vlan_set_untagged(u32 vlan, u64 portmask) rtl_table_release(r); } -/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer - */ +/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer */ static void rtl839x_vlan_fwd_on_inner(int port, bool is_set) { if (is_set) @@ -238,9 +238,7 @@ static void rtl839x_vlan_fwd_on_inner(int port, bool is_set) rtl839x_mask_port_reg_be(0ULL, BIT_ULL(port), RTL839X_VLAN_PORT_FWD); } -/* - * Hash seed is vid (actually rvid) concatenated with the MAC address - */ +/* Hash seed is vid (actually rvid) concatenated with the MAC address */ static u64 rtl839x_l2_hash_seed(u64 mac, u32 vid) { u64 v = vid; @@ -251,8 +249,7 @@ static u64 rtl839x_l2_hash_seed(u64 mac, u32 vid) return v; } -/* - * Applies the same hash algorithm as the one used currently by the ASIC to the seed +/* Applies the same hash algorithm as the one used currently by the ASIC to the seed * and returns a key into the L2 hash table */ static u32 rtl839x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) @@ -260,18 +257,18 @@ static u32 rtl839x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) u32 h1, h2, h; if (sw_r32(priv->r->l2_ctrl_0) & 1) { - h1 = (u32) (((seed >> 60) & 0x3f) ^ ((seed >> 54) & 0x3f) - ^ ((seed >> 36) & 0x3f) ^ ((seed >> 30) & 0x3f) - ^ ((seed >> 12) & 0x3f) ^ ((seed >> 6) & 0x3f)); - h2 = (u32) (((seed >> 48) & 0x3f) ^ ((seed >> 42) & 0x3f) - ^ ((seed >> 24) & 0x3f) ^ ((seed >> 18) & 0x3f) - ^ (seed & 0x3f)); + h1 = (u32) (((seed >> 60) & 0x3f) ^ ((seed >> 54) & 0x3f) ^ + ((seed >> 36) & 0x3f) ^ ((seed >> 30) & 0x3f) ^ + ((seed >> 12) & 0x3f) ^ ((seed >> 6) & 0x3f)); + h2 = (u32) (((seed >> 48) & 0x3f) ^ ((seed >> 42) & 0x3f) ^ + ((seed >> 24) & 0x3f) ^ ((seed >> 18) & 0x3f) ^ + (seed & 0x3f)); h = (h1 << 6) | h2; } else { - h = (seed >> 60) - ^ ((((seed >> 48) & 0x3f) << 6) | ((seed >> 54) & 0x3f)) - ^ ((seed >> 36) & 0xfff) ^ ((seed >> 24) & 0xfff) - ^ ((seed >> 12) & 0xfff) ^ (seed & 0xfff); + h = (seed >> 60) ^ + ((((seed >> 48) & 0x3f) << 6) | ((seed >> 54) & 0x3f)) ^ + ((seed >> 36) & 0xfff) ^ ((seed >> 24) & 0xfff) ^ + ((seed >> 12) & 0xfff) ^ (seed & 0xfff); } return h; @@ -368,9 +365,7 @@ static void rtl839x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) // pr_info("%s: vid %d, rvid: %d\n", __func__, e->vid, e->rvid); } -/* - * Fills the 3 SoC table registers r[] with the information in the rtl838x_l2_entry - */ +/* Fills the 3 SoC table registers r[] with the information in the rtl838x_l2_entry */ static void rtl839x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) { if (!e->valid) { @@ -417,8 +412,7 @@ static void rtl839x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) } } -/* - * Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table +/* Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table * hash is the id of the bucket and pos is the position of the entry in that bucket * The data read from the SoC is filled into rtl838x_l2_entry */ @@ -430,7 +424,7 @@ static u64 rtl839x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2 int i; rtl_table_read(q, idx); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) r[i] = sw_r32(rtl_table_data(q, i)); rtl_table_release(q); @@ -452,7 +446,7 @@ static void rtl839x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_ rtl839x_fill_l2_row(r, e); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) sw_w32(r[i], rtl_table_data(q, i)); rtl_table_write(q, idx); @@ -466,7 +460,7 @@ static u64 rtl839x_read_cam(int idx, struct rtl838x_l2_entry *e) int i; rtl_table_read(q, idx); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) r[i] = sw_r32(rtl_table_data(q, i)); rtl_table_release(q); @@ -489,7 +483,7 @@ static void rtl839x_write_cam(int idx, struct rtl838x_l2_entry *e) rtl839x_fill_l2_row(r, e); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) sw_w32(r[i], rtl_table_data(q, i)); rtl_table_write(q, idx); @@ -583,8 +577,7 @@ static void rtl839x_enable_learning(int port, bool enable) static void rtl839x_enable_flood(int port, bool enable) { - /* - * 0: Forward + /* 0: Forward * 1: Disable * 2: to CPU * 3: Copy to CPU @@ -623,6 +616,7 @@ irqreturn_t rtl839x_switch_irq(int irq, void *dev_id) dsa_port_phylink_mac_change(ds, i, false); } } + return IRQ_HANDLED; } @@ -689,6 +683,7 @@ int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val) errout: mutex_unlock(&smi_lock); + return err; } @@ -729,12 +724,11 @@ int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val) errout: mutex_unlock(&smi_lock); + return err; } -/* - * Read an mmd register of the PHY - */ +/* Read an mmd register of the PHY */ int rtl839x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val) { int err = 0; @@ -765,12 +759,11 @@ int rtl839x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val) errout: mutex_unlock(&smi_lock); + return err; } -/* - * Write to an mmd register of the PHY - */ +/* Write to an mmd register of the PHY */ int rtl839x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val) { int err = 0; @@ -802,6 +795,7 @@ int rtl839x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val) errout: mutex_unlock(&smi_lock); + return err; } @@ -838,10 +832,10 @@ void rtl839x_vlan_profile_dump(int profile) static void rtl839x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) { int i; - u32 cmd = 1 << 16 /* Execute cmd */ - | 0 << 15 /* Read */ - | 5 << 12 /* Table type 0b101 */ - | (msti & 0xfff); + u32 cmd = 1 << 16 | /* Execute cmd */ + 0 << 15 | /* Read */ + 5 << 12 | /* Table type 0b101 */ + (msti & 0xfff); priv->r->exec_tbl0_cmd(cmd); for (i = 0; i < 4; i++) @@ -851,18 +845,16 @@ static void rtl839x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port static void rtl839x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) { int i; - u32 cmd = 1 << 16 /* Execute cmd */ - | 1 << 15 /* Write */ - | 5 << 12 /* Table type 0b101 */ - | (msti & 0xfff); + u32 cmd = 1 << 16 | /* Execute cmd */ + 1 << 15 | /* Write */ + 5 << 12 | /* Table type 0b101 */ + (msti & 0xfff); for (i = 0; i < 4; i++) sw_w32(port_state[i], priv->r->tbl_access_data_0(i)); priv->r->exec_tbl0_cmd(cmd); } -/* - * Enables or disables the EEE/EEEP capability of a port - */ +/* Enables or disables the EEE/EEEP capability of a port */ void rtl839x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enable) { u32 v; @@ -885,9 +877,7 @@ void rtl839x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enabl priv->ports[port].eee_enabled = enable; } -/* - * Get EEE own capabilities and negotiation result - */ +/* Get EEE own capabilities and negotiation result */ int rtl839x_eee_port_ability(struct rtl838x_switch_priv *priv, struct ethtool_eee *e, int port) { u64 link, a; @@ -944,9 +934,7 @@ static void rtl839x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int inde sw_w32_mask(0, BIT(block), RTL839X_ACL_BLK_LOOKUP_CTRL); } -/* - * Delete a range of Packet Inspection Engine rules - */ +/* Delete a range of Packet Inspection Engine rules */ static int rtl839x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to) { u32 v = (index_from << 1)| (index_to << 13 ) | BIT(0); @@ -962,11 +950,11 @@ static int rtl839x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from } while (sw_r32(RTL839X_ACL_CLR_CTRL) & BIT(0)); mutex_unlock(&priv->reg_mutex); + return 0; } -/* - * Reads the intermediate representation of the templated match-fields of the +/* Reads the intermediate representation of the templated match-fields of the * PIE rule in the pie_rule structure and fills in the raw data fields in the * raw register space r[]. * The register space configuration size is identical for the RTL8380/90 and RTL9300, @@ -1067,7 +1055,6 @@ static void rtl839x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data_m = pr->sip_m >> 16; } break; - case TEMPLATE_FIELD_SIP2: case TEMPLATE_FIELD_SIP3: case TEMPLATE_FIELD_SIP4: @@ -1077,7 +1064,6 @@ static void rtl839x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; break; - case TEMPLATE_FIELD_DIP0: if (pr->is_ipv6) { data = pr->dip6.s6_addr16[7]; @@ -1087,7 +1073,6 @@ static void rtl839x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data_m = pr->dip_m; } break; - case TEMPLATE_FIELD_DIP1: if (pr->is_ipv6) { data = pr->dip6.s6_addr16[6]; @@ -1097,7 +1082,6 @@ static void rtl839x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data_m = pr->dip_m >> 16; } break; - case TEMPLATE_FIELD_DIP2: case TEMPLATE_FIELD_DIP3: case TEMPLATE_FIELD_DIP4: @@ -1107,7 +1091,6 @@ static void rtl839x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; break; - case TEMPLATE_FIELD_IP_TOS_PROTO: data = pr->tos_proto; data_m = pr->tos_proto_m; @@ -1140,8 +1123,7 @@ static void rtl839x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ } } -/* - * Creates the intermediate representation of the templated match-fields of the +/* Creates the intermediate representation of the templated match-fields of the * PIE rule in the pie_rule structure by reading the raw data fields in the * raw register space r[]. * The register space configuration size is identical for the RTL8380/90 and RTL9300, @@ -1541,13 +1523,17 @@ static int rtl839x_pie_verify_template(struct rtl838x_switch_priv *priv, return -1; if (pr->is_ipv6) { - if ((pr->sip6_m.s6_addr32[0] || pr->sip6_m.s6_addr32[1] - || pr->sip6_m.s6_addr32[2] || pr->sip6_m.s6_addr32[3]) - && !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) + if ((pr->sip6_m.s6_addr32[0] || + pr->sip6_m.s6_addr32[1] || + pr->sip6_m.s6_addr32[2] || + pr->sip6_m.s6_addr32[3]) && + !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) return -1; - if ((pr->dip6_m.s6_addr32[0] || pr->dip6_m.s6_addr32[1] - || pr->dip6_m.s6_addr32[2] || pr->dip6_m.s6_addr32[3]) - && !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) + if ((pr->dip6_m.s6_addr32[0] || + pr->dip6_m.s6_addr32[1] || + pr->dip6_m.s6_addr32[2] || + pr->dip6_m.s6_addr32[3]) && + !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) return -1; } @@ -1607,6 +1593,7 @@ static int rtl839x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rul rtl839x_pie_rule_write(priv, idx, pr); mutex_unlock(&priv->pie_mutex); + return 0; } @@ -1743,9 +1730,7 @@ static void rtl839x_route_write(int idx, struct rtl83xx_route *rt) rtl_table_release(r); } -/* - * Configure the switch's own MAC addresses used when routing packets - */ +/* Configure the switch's own MAC addresses used when routing packets */ static void rtl839x_setup_port_macs(struct rtl838x_switch_priv *priv) { int i; @@ -1836,17 +1821,17 @@ void rtl839x_set_receive_management_action(int port, rma_ctrl_t type, action_typ case BPDU: sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), RTL839X_RMA_BPDU_CTRL + ((port >> 4) << 2)); - break; + break; case PTP: sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), RTL839X_RMA_PTP_CTRL + ((port >> 4) << 2)); - break; + break; case LLTP: sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), RTL839X_RMA_LLTP_CTRL + ((port >> 4) << 2)); - break; + break; default: - break; + break; } } @@ -1917,7 +1902,7 @@ const struct rtl838x_reg rtl839x_reg = { .init_eee = rtl839x_init_eee, .port_eee_set = rtl839x_port_eee_set, .eee_port_ability = rtl839x_eee_port_ability, - .l2_hash_seed = rtl839x_l2_hash_seed, + .l2_hash_seed = rtl839x_l2_hash_seed, .l2_hash_key = rtl839x_l2_hash_key, .read_mcast_pmask = rtl839x_read_mcast_pmask, .write_mcast_pmask = rtl839x_write_mcast_pmask, diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl83xx.h b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl83xx.h index 485d0e8a7e..679f0533b4 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl83xx.h +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl83xx.h @@ -134,4 +134,3 @@ int rtl83xx_lag_add(struct dsa_switch *ds, int group, int port, struct netdev_la int rtl83xx_lag_del(struct dsa_switch *ds, int group, int port); #endif /* _NET_DSA_RTL83XX_H */ - diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c index 5dde8353e2..6cd0c6b814 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c @@ -242,8 +242,7 @@ static void rtl930x_vlan_set_untagged(u32 vlan, u64 portmask) rtl_table_release(r); } -/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer - */ +/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer */ static void rtl930x_vlan_fwd_on_inner(int port, bool is_set) { // Always set all tag modes to fwd based on either inner or outer tag @@ -289,10 +288,10 @@ static void rtl930x_l2_learning_setup(void) static void rtl930x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) { int i; - u32 cmd = 1 << 17 /* Execute cmd */ - | 0 << 16 /* Read */ - | 4 << 12 /* Table type 0b10 */ - | (msti & 0xfff); + u32 cmd = 1 << 17 | /* Execute cmd */ + 0 << 16 | /* Read */ + 4 << 12 | /* Table type 0b10 */ + (msti & 0xfff); priv->r->exec_tbl0_cmd(cmd); for (i = 0; i < 2; i++) @@ -303,10 +302,10 @@ static void rtl930x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port static void rtl930x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) { int i; - u32 cmd = 1 << 17 /* Execute cmd */ - | 1 << 16 /* Write */ - | 4 << 12 /* Table type 4 */ - | (msti & 0xfff); + u32 cmd = 1 << 17 | /* Execute cmd */ + 1 << 16 | /* Write */ + 4 << 12 | /* Table type 4 */ + (msti & 0xfff); for (i = 0; i < 2; i++) sw_w32(port_state[i], RTL930X_TBL_ACCESS_DATA_0(i)); @@ -338,8 +337,7 @@ static u64 rtl930x_l2_hash_seed(u64 mac, u32 vid) return v; } -/* - * Calculate both the block 0 and the block 1 hash by applyingthe same hash +/* Calculate both the block 0 and the block 1 hash by applyingthe same hash * algorithm as the one used currently by the ASIC to the seed, and return * both hashes in the lower and higher word of the return value since only 12 bit of * the hash are significant @@ -348,9 +346,12 @@ static u32 rtl930x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) { u32 k0, k1, h1, h2, h; - k0 = (u32) (((seed >> 55) & 0x1f) ^ ((seed >> 44) & 0x7ff) - ^ ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff) - ^ ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff)); + k0 = (u32) (((seed >> 55) & 0x1f) ^ + ((seed >> 44) & 0x7ff) ^ + ((seed >> 33) & 0x7ff) ^ + ((seed >> 22) & 0x7ff) ^ + ((seed >> 11) & 0x7ff) ^ + (seed & 0x7ff)); h1 = (seed >> 11) & 0x7ff; h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f); @@ -358,9 +359,12 @@ static u32 rtl930x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) h2 = (seed >> 33) & 0x7ff; h2 = ((h2 & 0x3f) << 5)| ((h2 >> 6) & 0x3f); - k1 = (u32) (((seed << 55) & 0x1f) ^ ((seed >> 44) & 0x7ff) ^ h2 - ^ ((seed >> 22) & 0x7ff) ^ h1 - ^ (seed & 0x7ff)); + k1 = (u32) (((seed << 55) & 0x1f) ^ + ((seed >> 44) & 0x7ff) ^ + h2 ^ + ((seed >> 22) & 0x7ff) ^ + h1 ^ + (seed & 0x7ff)); // Algorithm choice for block 0 if (sw_r32(RTL930X_L2_CTRL) & BIT(0)) @@ -382,9 +386,7 @@ static u32 rtl930x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) return h; } -/* - * Fills an L2 entry structure from the SoC registers - */ +/* Fills an L2 entry structure from the SoC registers */ static void rtl930x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) { pr_debug("In %s valid?\n", __func__); @@ -443,9 +445,7 @@ static void rtl930x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) } } -/* - * Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry - */ +/* Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry */ static void rtl930x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) { u32 port; @@ -457,9 +457,12 @@ static void rtl930x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) r[2] = BIT(31); // Set valid bit - r[0] = ((u32)e->mac[0]) << 24 | ((u32)e->mac[1]) << 16 - | ((u32)e->mac[2]) << 8 | ((u32)e->mac[3]); - r[1] = ((u32)e->mac[4]) << 24 | ((u32)e->mac[5]) << 16; + r[0] = ((u32)e->mac[0]) << 24 | + ((u32)e->mac[1]) << 16 | + ((u32)e->mac[2]) << 8 | + ((u32)e->mac[3]); + r[1] = ((u32)e->mac[4]) << 24 | + ((u32)e->mac[5]) << 16; r[2] |= e->next_hop ? BIT(12) : 0; @@ -490,8 +493,7 @@ static void rtl930x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) } } -/* - * Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table +/* Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table * hash is the id of the bucket and pos is the position of the entry in that bucket * The data read from the SoC is filled into rtl838x_l2_entry */ @@ -506,9 +508,10 @@ static u64 rtl930x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2 pr_debug("%s: hash %08x, pos: %d\n", __func__, hash, pos); - /* On the RTL93xx, 2 different hash algorithms are used making it a total of - * 8 buckets that need to be searched, 4 for each hash-half - * Use second hash space when bucket is between 4 and 8 */ + /* On the RTL93xx, 2 different hash algorithms are used making it a + * total of 8 buckets that need to be searched, 4 for each hash-half + * Use second hash space when bucket is between 4 and 8 + */ if (pos >= 4) { pos -= 4; hash >>= 16; @@ -531,11 +534,16 @@ static u64 rtl930x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2 if (!e->valid) return 0; - mac = ((u64)e->mac[0]) << 40 | ((u64)e->mac[1]) << 32 | ((u64)e->mac[2]) << 24 - | ((u64)e->mac[3]) << 16 | ((u64)e->mac[4]) << 8 | ((u64)e->mac[5]); + mac = ((u64)e->mac[0]) << 40 | + ((u64)e->mac[1]) << 32 | + ((u64)e->mac[2]) << 24 | + ((u64)e->mac[3]) << 16 | + ((u64)e->mac[4]) << 8 | + ((u64)e->mac[5]); seed = rtl930x_l2_hash_seed(mac, e->rvid); pr_debug("%s: mac %016llx, seed %016llx\n", __func__, mac, seed); + // return vid with concatenated mac as unique id return seed; } @@ -553,7 +561,7 @@ static void rtl930x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_ rtl930x_fill_l2_row(r, e); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) sw_w32(r[i], rtl_table_data(q, i)); rtl_table_write(q, idx); @@ -567,7 +575,7 @@ static u64 rtl930x_read_cam(int idx, struct rtl838x_l2_entry *e) int i; rtl_table_read(q, idx); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) r[i] = sw_r32(rtl_table_data(q, i)); rtl_table_release(q); @@ -588,7 +596,7 @@ static void rtl930x_write_cam(int idx, struct rtl838x_l2_entry *e) rtl930x_fill_l2_row(r, e); - for (i= 0; i < 3; i++) + for (i = 0; i < 3; i++) sw_w32(r[i], rtl_table_data(q, i)); rtl_table_write(q, idx); @@ -607,6 +615,7 @@ static u64 rtl930x_read_mcast_pmask(int idx) rtl_table_release(q); pr_debug("%s: Index idx %d has portmask %08x\n", __func__, idx, portmask); + return portmask; } @@ -632,12 +641,12 @@ u64 rtl930x_traffic_get(int source) rtl_table_read(r, source); v = sw_r32(rtl_table_data(r, 0)); rtl_table_release(r); - return v >> 3; + v = v >> 3; + + return v; } -/* - * Enable traffic between a source port and a destination port matrix - */ +/* Enable traffic between a source port and a destination port matrix */ void rtl930x_traffic_set(int source, u64 dest_matrix) { struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6); @@ -698,7 +707,8 @@ irqreturn_t rtl930x_switch_irq(int irq, void *dev_id) for (i = 0; i < 28; i++) { if (ports & BIT(i)) { /* Read the register twice because of issues with latency at least - * with the external RTL8226 PHY on the XGS1210 */ + * with the external RTL8226 PHY on the XGS1210 + */ link = sw_r32(RTL930X_MAC_LINK_STS); link = sw_r32(RTL930X_MAC_LINK_STS); if (link & BIT(i)) @@ -772,9 +782,7 @@ int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val) return err; } -/* - * Write to an mmd register of the PHY - */ +/* Write to an mmd register of the PHY */ int rtl930x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val) { int err = 0; @@ -803,9 +811,7 @@ int rtl930x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val) return err; } -/* - * Read an mmd register of the PHY - */ +/* Read an mmd register of the PHY */ int rtl930x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val) { int err = 0; @@ -834,8 +840,7 @@ int rtl930x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val) return err; } -/* - * Calculate both the block 0 and the block 1 hash, and return in +/* Calculate both the block 0 and the block 1 hash, and return in * lower and higher word of the return value since only 12 bit of * the hash are significant */ @@ -843,19 +848,25 @@ u32 rtl930x_hash(struct rtl838x_switch_priv *priv, u64 seed) { u32 k0, k1, h1, h2, h; - k0 = (u32) (((seed >> 55) & 0x1f) ^ ((seed >> 44) & 0x7ff) - ^ ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff) - ^ ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff)); + k0 = (u32) (((seed >> 55) & 0x1f) ^ + ((seed >> 44) & 0x7ff) ^ + ((seed >> 33) & 0x7ff) ^ + ((seed >> 22) & 0x7ff) ^ + ((seed >> 11) & 0x7ff) ^ + (seed & 0x7ff)); h1 = (seed >> 11) & 0x7ff; h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f); h2 = (seed >> 33) & 0x7ff; - h2 = ((h2 & 0x3f) << 5)| ((h2 >> 6) & 0x3f); + h2 = ((h2 & 0x3f) << 5) | ((h2 >> 6) & 0x3f); - k1 = (u32) (((seed << 55) & 0x1f) ^ ((seed >> 44) & 0x7ff) ^ h2 - ^ ((seed >> 22) & 0x7ff) ^ h1 - ^ (seed & 0x7ff)); + k1 = (u32) (((seed << 55) & 0x1f) ^ + ((seed >> 44) & 0x7ff) ^ + h2 ^ + ((seed >> 22) & 0x7ff) ^ + h1 ^ + (seed & 0x7ff)); // Algorithm choice for block 0 if (sw_r32(RTL930X_L2_CTRL) & BIT(0)) @@ -877,9 +888,7 @@ u32 rtl930x_hash(struct rtl838x_switch_priv *priv, u64 seed) return h; } -/* - * Enables or disables the EEE/EEEP capability of a port - */ +/* Enables or disables the EEE/EEEP capability of a port */ void rtl930x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enable) { u32 v; @@ -901,9 +910,7 @@ void rtl930x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enabl priv->ports[port].eee_enabled = enable; } -/* - * Get EEE own capabilities and negotiation result - */ +/* Get EEE own capabilities and negotiation result */ int rtl930x_eee_port_ability(struct rtl838x_switch_priv *priv, struct ethtool_eee *e, int port) { u32 link, a; @@ -1012,41 +1019,41 @@ static u32 rtl930x_l3_hash6(struct in6_addr *ip6, int algorithm, bool move_dip) rows[9] = (HASH_PICK(ip6->s6_addr[9], 0, 6) << 3) | HASH_PICK(ip6->s6_addr[10], 5, 3); rows[10] = (HASH_PICK(ip6->s6_addr[10], 0, 5) << 4) | HASH_PICK(ip6->s6_addr[11], 4, 4); if (!algorithm) { - rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5) - | (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0); - rows[12] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6) - | (HASH_PICK(ip6->s6_addr[13], 2, 6) << 0); - rows[13] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7) - | (HASH_PICK(ip6->s6_addr[14], 1, 7) << 0); + rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5) | + (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0); + rows[12] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6) | + (HASH_PICK(ip6->s6_addr[13], 2, 6) << 0); + rows[13] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7) | + (HASH_PICK(ip6->s6_addr[14], 1, 7) << 0); if (!move_dip) { - rows[14] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8) - | (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0); + rows[14] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8) | + (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0); } - hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ rows[5] ^ rows[6] - ^ rows[7] ^ rows[8] ^ rows[9] ^ rows[10] ^ rows[11] ^ rows[12] - ^ rows[13] ^ rows[14]; + hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ + rows[5] ^ rows[6] ^ rows[7] ^ rows[8] ^ rows[9] ^ + rows[10] ^ rows[11] ^ rows[12] ^ rows[13] ^ rows[14]; } else { rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5); rows[12] = (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0); - rows[13] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6) - | HASH_PICK(ip6->s6_addr[13], 2, 6); - rows[14] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7) - | HASH_PICK(ip6->s6_addr[14], 1, 7); + rows[13] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6) | + HASH_PICK(ip6->s6_addr[13], 2, 6); + rows[14] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7) | + HASH_PICK(ip6->s6_addr[14], 1, 7); if (!move_dip) { - rows[15] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8) - | (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0); + rows[15] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8) | + (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0); } s0 = rows[12] + rows[13] + rows[14]; s1 = (s0 & 0x1ff) + ((s0 & (0x1ff << 9)) >> 9); pH = (s1 & 0x1ff) + ((s1 & (0x1ff << 9)) >> 9); - hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ rows[5] ^ rows[6] - ^ rows[7] ^ rows[8] ^ rows[9] ^ rows[10] ^ rows[11] ^ pH ^ rows[15]; + hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ + rows[5] ^ rows[6] ^ rows[7] ^ rows[8] ^ rows[9] ^ + rows[10] ^ rows[11] ^ pH ^ rows[15]; } return hash; } -/* - * Read a prefix route entry from the L3_PREFIX_ROUTE_IPUC table +/* Read a prefix route entry from the L3_PREFIX_ROUTE_IPUC table * We currently only support IPv4 and IPv6 unicast route */ static void rtl930x_route_read(int idx, struct rtl83xx_route *rt) @@ -1128,8 +1135,7 @@ static void rtl930x_net6_mask(int prefix_len, struct in6_addr *ip6_m) ip6_m->s6_addr[o] |= b ? 0xff00 >> b : 0x00; } -/* - * Read a host route entry from the table using its index +/* Read a host route entry from the table using its index * We currently only support IPv4 and IPv6 unicast route */ static void rtl930x_host_route_read(int idx, struct rtl83xx_route *rt) @@ -1181,8 +1187,7 @@ out: rtl_table_release(r); } -/* - * Write a host route entry from the table using its index +/* Write a host route entry from the table using its index * We currently only support IPv4 and IPv6 unicast route */ static void rtl930x_host_route_write(int idx, struct rtl83xx_route *rt) @@ -1237,8 +1242,7 @@ out: rtl_table_release(r); } -/* - * Look up the index of a prefix route in the routing table CAM for unicast IPv4/6 routes +/* Look up the index of a prefix route in the routing table CAM for unicast IPv4/6 routes * using hardware offload. */ static int rtl930x_route_lookup_hw(struct rtl83xx_route *rt) @@ -1317,8 +1321,7 @@ static int rtl930x_find_l3_slot(struct rtl83xx_route *rt, bool must_exist) return -1; } -/* - * Write a prefix route into the routing table CAM at position idx +/* Write a prefix route into the routing table CAM at position idx * Currently only IPv4 and IPv6 unicast routes are supported */ static void rtl930x_route_write(int idx, struct rtl83xx_route *rt) @@ -1400,8 +1403,7 @@ static void rtl930x_route_write(int idx, struct rtl83xx_route *rt) } -/* - * Get the destination MAC and L3 egress interface ID of a nexthop entry from +/* Get the destination MAC and L3 egress interface ID of a nexthop entry from * the SoC's L3_NEXTHOP table */ static void rtl930x_get_l3_nexthop(int idx, u16 *dmac_id, u16 *interface) @@ -1467,9 +1469,7 @@ static int rtl930x_l3_mtu_add(struct rtl838x_switch_priv *priv, int mtu) return mtu_id; } -/* - * Creates an interface for a route by setting up the HW tables in the SoC - */ +/* Creates an interface for a route by setting up the HW tables in the SoC */ static int rtl930x_l3_intf_add(struct rtl838x_switch_priv *priv, struct rtl838x_l3_intf *intf) { int i, intf_id, mtu_id; @@ -1501,8 +1501,7 @@ static int rtl930x_l3_intf_add(struct rtl838x_switch_priv *priv, struct rtl838x_ } } -/* - * Set the destination MAC and L3 egress interface ID for a nexthop entry in the SoC's +/* Set the destination MAC and L3 egress interface ID for a nexthop entry in the SoC's * L3_NEXTHOP table. The nexthop entry is identified by idx. * dmac_id is the reference to the L2 entry in the L2 forwarding table, special values are * 0x7ffe: TRAP2CPU @@ -1530,8 +1529,7 @@ static void rtl930x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int inde sw_w32_mask(0, BIT(block), RTL930X_PIE_BLK_LOOKUP_CTRL); } -/* - * Reads the intermediate representation of the templated match-fields of the +/* Reads the intermediate representation of the templated match-fields of the * PIE rule in the pie_rule structure and fills in the raw data fields in the * raw register space r[]. * The register space configuration size is identical for the RTL8380/90 and RTL9300, @@ -1624,7 +1622,6 @@ static void rtl930x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data_m = pr->sip_m >> 16; } break; - case TEMPLATE_FIELD_SIP2: case TEMPLATE_FIELD_SIP3: case TEMPLATE_FIELD_SIP4: @@ -1634,7 +1631,6 @@ static void rtl930x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; break; - case TEMPLATE_FIELD_DIP0: if (pr->is_ipv6) { data = pr->dip6.s6_addr16[7]; @@ -1644,7 +1640,6 @@ static void rtl930x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data_m = pr->dip_m; } break; - case TEMPLATE_FIELD_DIP1: if (pr->is_ipv6) { data = pr->dip6.s6_addr16[6]; @@ -1654,7 +1649,6 @@ static void rtl930x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data_m = pr->dip_m >> 16; } break; - case TEMPLATE_FIELD_DIP2: case TEMPLATE_FIELD_DIP3: case TEMPLATE_FIELD_DIP4: @@ -1664,7 +1658,6 @@ static void rtl930x_write_pie_templated(u32 r[], struct pie_rule *pr, enum templ data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; break; - case TEMPLATE_FIELD_IP_TOS_PROTO: data = pr->tos_proto; data_m = pr->tos_proto_m; @@ -1900,8 +1893,7 @@ static bool rtl930x_pie_templ_has(int t, enum template_field_id field_type) return false; } -/* - * Verify that the rule pr is compatible with a given template t in block block +/* Verify that the rule pr is compatible with a given template t in block block * Note that this function is SoC specific since the values of e.g. TEMPLATE_FIELD_SIP0 * depend on the SoC */ @@ -1917,13 +1909,17 @@ static int rtl930x_pie_verify_template(struct rtl838x_switch_priv *priv, return -1; if (pr->is_ipv6) { - if ((pr->sip6_m.s6_addr32[0] || pr->sip6_m.s6_addr32[1] - || pr->sip6_m.s6_addr32[2] || pr->sip6_m.s6_addr32[3]) - && !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) + if ((pr->sip6_m.s6_addr32[0] || + pr->sip6_m.s6_addr32[1] || + pr->sip6_m.s6_addr32[2] || + pr->sip6_m.s6_addr32[3]) && + !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) return -1; - if ((pr->dip6_m.s6_addr32[0] || pr->dip6_m.s6_addr32[1] - || pr->dip6_m.s6_addr32[2] || pr->dip6_m.s6_addr32[3]) - && !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) + if ((pr->dip6_m.s6_addr32[0] || + pr->dip6_m.s6_addr32[1] || + pr->dip6_m.s6_addr32[2] || + pr->dip6_m.s6_addr32[3]) && + !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) return -1; } @@ -1991,9 +1987,7 @@ static int rtl930x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rul return 0; } -/* - * Delete a range of Packet Inspection Engine rules - */ +/* Delete a range of Packet Inspection Engine rules */ static int rtl930x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to) { u32 v = (index_from << 1)| (index_to << 12 ) | BIT(0); @@ -2040,7 +2034,7 @@ static void rtl930x_pie_init(struct rtl838x_switch_priv *priv) // Assign blocks 0-7 to VACL phase (bit = 0), blocks 8-15 to IACL (bit = 1) sw_w32(0xff00, RTL930X_PIE_BLK_PHASE_CTRL); - + // Enable predefined templates 0, 1 for first quarter of all blocks template_selectors = 0 | (1 << 4); for (i = 0; i < priv->n_pie_blocks / 4; i++) @@ -2063,8 +2057,7 @@ static void rtl930x_pie_init(struct rtl838x_switch_priv *priv) } -/* - * Sets up an egress interface for L3 actions +/* Sets up an egress interface for L3 actions * Actions for ip4/6_icmp_redirect, ip4/6_pbr_icmp_redirect are: * 0: FORWARD, 1: DROP, 2: TRAP2CPU, 3: COPY2CPU, 4: TRAP2MASTERCPU 5: COPY2MASTERCPU * 6: HARDDROP @@ -2097,8 +2090,7 @@ static void rtl930x_set_l3_egress_intf(int idx, struct rtl838x_l3_intf *intf) rtl_table_release(r); } -/* - * Reads a MAC entry for L3 termination as entry point for routing +/* Reads a MAC entry for L3 termination as entry point for routing * from the hardware table * idx is the index into the L3_ROUTER_MAC table */ @@ -2121,18 +2113,17 @@ static void rtl930x_get_l3_router_mac(u32 idx, struct rtl93xx_rt_mac *m) m->vid = v & 0xfff; m->vid_mask = w & 0xfff; m->action = sw_r32(rtl_table_data(r, 6)) & 0x7; - m->mac_mask = ((((u64)sw_r32(rtl_table_data(r, 5))) << 32) & 0xffffffffffffULL) - | (sw_r32(rtl_table_data(r, 4))); - m->mac = ((((u64)sw_r32(rtl_table_data(r, 1))) << 32) & 0xffffffffffffULL) - | (sw_r32(rtl_table_data(r, 2))); + m->mac_mask = ((((u64)sw_r32(rtl_table_data(r, 5))) << 32) & 0xffffffffffffULL) | + (sw_r32(rtl_table_data(r, 4))); + m->mac = ((((u64)sw_r32(rtl_table_data(r, 1))) << 32) & 0xffffffffffffULL) | + (sw_r32(rtl_table_data(r, 2))); // Bits L3_INTF and BMSK_L3_INTF are 0 out: rtl_table_release(r); } -/* - * Writes a MAC entry for L3 termination as entry point for routing +/* Writes a MAC entry for L3 termination as entry point for routing * into the hardware table * idx is the index into the L3_ROUTER_MAC table */ @@ -2172,8 +2163,7 @@ static void rtl930x_set_l3_router_mac(u32 idx, struct rtl93xx_rt_mac *m) rtl_table_release(r); } -/* - * Get the Destination-MAC of an L3 egress interface or the Source MAC for routed packets +/* Get the Destination-MAC of an L3 egress interface or the Source MAC for routed packets * from the SoC's L3_EGR_INTF_MAC table * Indexes 0-2047 are DMACs, 2048+ are SMACs */ @@ -2192,8 +2182,8 @@ static u64 rtl930x_get_l3_egress_mac(u32 idx) return mac; } -/* - * Set the Destination-MAC of a route or the Source MAC of an L3 egress interface + +/* Set the Destination-MAC of a route or the Source MAC of an L3 egress interface * in the SoC's L3_EGR_INTF_MAC table * Indexes 0-2047 are DMACs, 2048+ are SMACs */ @@ -2211,8 +2201,7 @@ static void rtl930x_set_l3_egress_mac(u32 idx, u64 mac) rtl_table_release(r); } -/* - * Configure L3 routing settings of the device: +/* Configure L3 routing settings of the device: * - MTUs * - Egress interface * - The router's MAC address on which routed packets are expected @@ -2425,7 +2414,7 @@ static void rtl930x_led_init(struct rtl838x_switch_priv *priv) return; } - for (i= 0; i < priv->cpu_port; i++) { + for (i = 0; i < priv->cpu_port; i++) { pos = (i << 1) % 32; sw_w32_mask(0x3 << pos, 0, RTL930X_LED_PORT_FIB_SET_SEL_CTRL(i)); sw_w32_mask(0x3 << pos, 0, RTL930X_LED_PORT_COPR_SET_SEL_CTRL(i)); diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c index ee8d6c2c73..802eecccd8 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only #include + #include "rtl83xx.h" #define RTL931X_VLAN_PORT_TAG_STS_INTERNAL 0x0 @@ -142,12 +143,12 @@ void rtl931x_vlan_profile_dump(int index) return; profile[0] = sw_r32(RTL931X_VLAN_PROFILE_SET(index)); - profile[1] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 4) & 0x1FFFFFFFULL) << 32 - | (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 8) & 0xFFFFFFFF); - profile[2] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 16) & 0x1FFFFFFFULL) << 32 - | (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 12) & 0xFFFFFFFF); - profile[3] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 20) & 0x1FFFFFFFULL) << 32 - | (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 24) & 0xFFFFFFFF); + profile[1] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 4) & 0x1FFFFFFFULL) << 32 | + (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 8) & 0xFFFFFFFF); + profile[2] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 16) & 0x1FFFFFFFULL) << 32 | + (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 12) & 0xFFFFFFFF); + profile[3] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 20) & 0x1FFFFFFFULL) << 32 | + (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 24) & 0xFFFFFFFF); pr_info("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %llx, \ IPv4 Unknown MultiCast Field %llx, IPv6 Unknown MultiCast Field: %llx", @@ -157,10 +158,10 @@ void rtl931x_vlan_profile_dump(int index) static void rtl931x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) { int i; - u32 cmd = 1 << 20 /* Execute cmd */ - | 0 << 19 /* Read */ - | 5 << 15 /* Table type 0b101 */ - | (msti & 0x3fff); + u32 cmd = 1 << 20 | /* Execute cmd */ + 0 << 19 | /* Read */ + 5 << 15 | /* Table type 0b101 */ + (msti & 0x3fff); priv->r->exec_tbl0_cmd(cmd); for (i = 0; i < 4; i++) @@ -170,10 +171,10 @@ static void rtl931x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port static void rtl931x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) { int i; - u32 cmd = 1 << 20 /* Execute cmd */ - | 1 << 19 /* Write */ - | 5 << 15 /* Table type 0b101 */ - | (msti & 0x3fff); + u32 cmd = 1 << 20 | /* Execute cmd */ + 1 << 19 | /* Write */ + 5 << 15 | /* Table type 0b101 */ + (msti & 0x3fff); for (i = 0; i < 4; i++) sw_w32(port_state[i], priv->r->tbl_access_data_0(i)); priv->r->exec_tbl0_cmd(cmd); @@ -316,6 +317,7 @@ irqreturn_t rtl931x_switch_irq(int irq, void *dev_id) } } } + return IRQ_HANDLED; } @@ -352,6 +354,7 @@ int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val) err = -EIO; mutex_unlock(&smi_lock); + return err; } @@ -380,12 +383,11 @@ int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val) __func__, port, page, reg, *val, v); mutex_unlock(&smi_lock); + return 0; } -/* - * Read an mmd register of the PHY - */ +/* Read an mmd register of the PHY */ int rtl931x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val) { int err = 0; @@ -427,9 +429,7 @@ int rtl931x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val) return err; } -/* - * Write to an mmd register of the PHY - */ +/* Write to an mmd register of the PHY */ int rtl931x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val) { int err = 0; @@ -460,6 +460,7 @@ int rtl931x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val) pr_debug("%s: port %d, dev: %x, regnum: %x, val: %x (err %d)\n", __func__, port, devnum, mdiobus_c45_regad(regnum), val, err); mutex_unlock(&smi_lock); + return err; } @@ -538,12 +539,12 @@ u64 rtl931x_traffic_get(int source) rtl_table_read(r, source); v = sw_r32(rtl_table_data(r, 0)); rtl_table_release(r); - return v >> 3; + v = v >> 3; + + return v; } -/* - * Enable traffic between a source port and a destination port matrix - */ +/* Enable traffic between a source port and a destination port matrix */ void rtl931x_traffic_set(int source, u64 dest_matrix) { struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 6); @@ -581,8 +582,7 @@ static u64 rtl931x_l2_hash_seed(u64 mac, u32 vid) return v; } -/* - * Calculate both the block 0 and the block 1 hash by applyingthe same hash +/* Calculate both the block 0 and the block 1 hash by applyingthe same hash * algorithm as the one used currently by the ASIC to the seed, and return * both hashes in the lower and higher word of the return value since only 12 bit of * the hash are significant. @@ -629,9 +629,7 @@ static u32 rtl931x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) return h; } -/* - * Fills an L2 entry structure from the SoC registers - */ +/* Fills an L2 entry structure from the SoC registers */ static void rtl931x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) { pr_debug("In %s valid?\n", __func__); @@ -697,9 +695,7 @@ static void rtl931x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) } } -/* - * Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry - */ +/* Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry */ static void rtl931x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) { u32 port; @@ -711,9 +707,12 @@ static void rtl931x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) r[2] = BIT(31); // Set valid bit - r[0] = ((u32)e->mac[0]) << 24 | ((u32)e->mac[1]) << 16 - | ((u32)e->mac[2]) << 8 | ((u32)e->mac[3]); - r[1] = ((u32)e->mac[4]) << 24 | ((u32)e->mac[5]) << 16; + r[0] = ((u32)e->mac[0]) << 24 | + ((u32)e->mac[1]) << 16 | + ((u32)e->mac[2]) << 8 | + ((u32)e->mac[3]); + r[1] = ((u32)e->mac[4]) << 24 | + ((u32)e->mac[5]) << 16; r[2] |= e->next_hop ? BIT(12) : 0; @@ -744,8 +743,7 @@ static void rtl931x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) } } -/* - * Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table +/* Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table * hash is the id of the bucket and pos is the position of the entry in that bucket * The data read from the SoC is filled into rtl838x_l2_entry */ @@ -762,7 +760,8 @@ static u64 rtl931x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2 /* On the RTL93xx, 2 different hash algorithms are used making it a total of * 8 buckets that need to be searched, 4 for each hash-half - * Use second hash space when bucket is between 4 and 8 */ + * Use second hash space when bucket is between 4 and 8 + */ if (pos >= 4) { pos -= 4; hash >>= 16; @@ -785,18 +784,23 @@ static u64 rtl931x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2 if (!e->valid) return 0; - mac = ((u64)e->mac[0]) << 40 | ((u64)e->mac[1]) << 32 | ((u64)e->mac[2]) << 24 - | ((u64)e->mac[3]) << 16 | ((u64)e->mac[4]) << 8 | ((u64)e->mac[5]); + mac = ((u64)e->mac[0]) << 40 | + ((u64)e->mac[1]) << 32 | + ((u64)e->mac[2]) << 24 | + ((u64)e->mac[3]) << 16 | + ((u64)e->mac[4]) << 8 | + ((u64)e->mac[5]); seed = rtl931x_l2_hash_seed(mac, e->rvid); pr_debug("%s: mac %016llx, seed %016llx\n", __func__, mac, seed); + // return vid with concatenated mac as unique id return seed; } static u64 rtl931x_read_cam(int idx, struct rtl838x_l2_entry *e) { - return 0; + return 0; } static void rtl931x_write_cam(int idx, struct rtl838x_l2_entry *e) @@ -817,12 +821,11 @@ static void rtl931x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_ rtl931x_fill_l2_row(r, e); pr_info("%s: %d: %08x %08x %08x\n", __func__, idx, r[0], r[1], r[2]); - for (i= 0; i < 4; i++) + for (i = 0; i < 4; i++) sw_w32(r[i], rtl_table_data(q, i)); rtl_table_write(q, idx); rtl_table_release(q); - } static void rtl931x_vlan_fwd_on_inner(int port, bool is_set) @@ -857,7 +860,7 @@ static void rtl931x_vlan_profile_setup(int profile) p[5] = 0x1FFFFFF; // IPv6 unknwon MC flooding portmask p[6] = 0xFFFFFFFF; - for (i = 0; i < 7; i++) + for (int i = 0; i < 7; i++) sw_w32(p[i], RTL931X_VLAN_PROFILE_SET(profile) + i * 4); pr_info("Leaving %s\n", __func__); } @@ -888,6 +891,7 @@ static u64 rtl931x_read_mcast_pmask(int idx) rtl_table_release(q); pr_debug("%s: Index idx %d has portmask %016llx\n", __func__, idx, portmask); + return portmask; } @@ -919,6 +923,7 @@ static int rtl931x_set_ageing_time(unsigned long msec) t = t > 0x1FFFFF ? 0x1FFFFF : t; sw_w32_mask(0x1FFFFF, t, RTL931X_L2_AGE_CTRL); pr_debug("Dynamic aging for ports: %x\n", sw_r32(RTL931X_L2_PORT_AGE_CTRL)); + return 0; } void rtl931x_sw_init(struct rtl838x_switch_priv *priv) @@ -933,8 +938,7 @@ static void rtl931x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int inde sw_w32_mask(0, BIT(block), RTL931X_PIE_BLK_LOOKUP_CTRL); } -/* - * Fills the data in the intermediate representation in the pie_rule structure +/* Fills the data in the intermediate representation in the pie_rule structure * into a data field for a given template field field_type * TODO: This function looks very similar to the function of the rtl9300, but * since it uses the physical template_field_id, which are different for each @@ -1031,7 +1035,6 @@ int rtl931x_pie_data_fill(enum template_field_id field_type, struct pie_rule *pr *data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; *data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; break; - case TEMPLATE_FIELD_DIP0: if (pr->is_ipv6) { *data = pr->dip6.s6_addr16[7]; @@ -1050,7 +1053,6 @@ int rtl931x_pie_data_fill(enum template_field_id field_type, struct pie_rule *pr *data_m = pr->dip_m >> 16; } break; - case TEMPLATE_FIELD_DIP2: case TEMPLATE_FIELD_DIP3: case TEMPLATE_FIELD_DIP4: @@ -1060,7 +1062,6 @@ int rtl931x_pie_data_fill(enum template_field_id field_type, struct pie_rule *pr *data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; *data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; break; - case TEMPLATE_FIELD_IP_TOS_PROTO: *data = pr->tos_proto; *data_m = pr->tos_proto_m; @@ -1092,8 +1093,7 @@ int rtl931x_pie_data_fill(enum template_field_id field_type, struct pie_rule *pr return 0; } -/* - * Reads the intermediate representation of the templated match-fields of the +/* Reads the intermediate representation of the templated match-fields of the * PIE rule in the pie_rule structure and fills in the raw data fields in the * raw register space r[]. * The register space configuration size is identical for the RTL8380/90 and RTL9300, @@ -1310,8 +1310,7 @@ static bool rtl931x_pie_templ_has(int t, enum template_field_id field_type) return false; } -/* - * Verify that the rule pr is compatible with a given template t in block block +/* Verify that the rule pr is compatible with a given template t in block block * Note that this function is SoC specific since the values of e.g. TEMPLATE_FIELD_SIP0 * depend on the SoC */ @@ -1327,13 +1326,17 @@ static int rtl931x_pie_verify_template(struct rtl838x_switch_priv *priv, return -1; if (pr->is_ipv6) { - if ((pr->sip6_m.s6_addr32[0] || pr->sip6_m.s6_addr32[1] - || pr->sip6_m.s6_addr32[2] || pr->sip6_m.s6_addr32[3]) - && !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) + if ((pr->sip6_m.s6_addr32[0] || + pr->sip6_m.s6_addr32[1] || + pr->sip6_m.s6_addr32[2] || + pr->sip6_m.s6_addr32[3]) && + !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) return -1; - if ((pr->dip6_m.s6_addr32[0] || pr->dip6_m.s6_addr32[1] - || pr->dip6_m.s6_addr32[2] || pr->dip6_m.s6_addr32[3]) - && !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) + if ((pr->dip6_m.s6_addr32[0] || + pr->dip6_m.s6_addr32[1] || + pr->dip6_m.s6_addr32[2] || + pr->dip6_m.s6_addr32[3]) && + !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) return -1; } @@ -1398,12 +1401,11 @@ static int rtl931x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rul rtl931x_pie_rule_write(priv, idx, pr); mutex_unlock(&priv->pie_mutex); + return 0; } -/* - * Delete a range of Packet Inspection Engine rules - */ +/* Delete a range of Packet Inspection Engine rules */ static int rtl931x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to) { u32 v = (index_from << 1)| (index_to << 13 ) | BIT(0); @@ -1419,6 +1421,7 @@ static int rtl931x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from } while (sw_r32(RTL931X_PIE_CLR_CTRL) & BIT(0)); mutex_unlock(&priv->reg_mutex); + return 0; } @@ -1533,7 +1536,7 @@ void rtl931x_set_distribution_algorithm(int group, int algoidx, u32 algomsk) u32 newmask = 0; /* TODO: for now we set algoidx to 0 */ - algoidx=0; + algoidx = 0; if (algomsk & TRUNK_DISTRIBUTION_ALGO_SIP_BIT) { l3shift = 4; @@ -1584,7 +1587,7 @@ static void rtl931x_led_init(struct rtl838x_switch_priv *priv) return; } - for (i= 0; i < priv->cpu_port; i++) { + for (i = 0; i < priv->cpu_port; i++) { pos = (i << 1) % 32; sw_w32_mask(0x3 << pos, 0, RTL931X_LED_PORT_FIB_SET_SEL_CTRL(i)); sw_w32_mask(0x3 << pos, 0, RTL931X_LED_PORT_COPR_SET_SEL_CTRL(i)); @@ -1626,7 +1629,6 @@ static void rtl931x_led_init(struct rtl838x_switch_priv *priv) for (i = 0; i < 32; i++) pr_info("%s %08x: %08x\n",__func__, 0xbb000600 + i * 4, sw_r32(0x0600 + i * 4)); - } const struct rtl838x_reg rtl931x_reg = { @@ -1698,4 +1700,3 @@ const struct rtl838x_reg rtl931x_reg = { .l3_setup = rtl931x_l3_setup, .led_init = rtl931x_led_init, }; - diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/tc.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/tc.c index d0a8ee8cfe..401fb4553c 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/tc.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/tc.c @@ -5,14 +5,12 @@ #include #include #include - #include + #include "rtl83xx.h" #include "rtl838x.h" -/* - * Parse the flow rule for the matching conditions - */ +/* Parse the flow rule for the matching conditions */ static int rtl83xx_parse_flow_rule(struct rtl838x_switch_priv *priv, struct flow_rule *rule, struct rtl83xx_flow *flow) { @@ -44,8 +42,7 @@ static int rtl83xx_parse_flow_rule(struct rtl838x_switch_priv *priv, flow->rule.frame_type_l4 = 0; if (match.key->ip_proto == IPPROTO_TCP) flow->rule.frame_type_l4 = 1; - if (match.key->ip_proto == IPPROTO_ICMP - || match.key->ip_proto ==IPPROTO_ICMPV6) + if (match.key->ip_proto == IPPROTO_ICMP || match.key->ip_proto == IPPROTO_ICMPV6) flow->rule.frame_type_l4 = 2; if (match.key->ip_proto == IPPROTO_TCP) flow->rule.frame_type_l4 = 3; @@ -150,7 +147,7 @@ static int rtl83xx_add_flow(struct rtl838x_switch_priv *priv, struct flow_cls_of pr_debug("%s\n", __func__); rtl83xx_parse_flow_rule(priv, rule, flow); - + flow_action_for_each(i, act, &rule->action) { switch (act->id) { case FLOW_ACTION_DROP: @@ -288,6 +285,7 @@ out_free: kfree(flow); out: pr_err("%s: error %d\n", __func__, err); + return err; } @@ -311,6 +309,7 @@ static int rtl83xx_delete_flower(struct rtl838x_switch_priv *priv, kfree_rcu(flow, rcu_head); rcu_read_unlock(); + return 0; } @@ -335,7 +334,8 @@ static int rtl83xx_stats_flower(struct rtl838x_switch_priv *priv, // TODO: We need a second PIE rule to count the bytes flow_stats_update(&cls_flower->stats, 100 * new_packets, new_packets, 0, lastused, - FLOW_ACTION_HW_STATS_IMMEDIATE); + FLOW_ACTION_HW_STATS_IMMEDIATE); + return 0; } diff --git a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c index 32de5cc554..6cd649db54 100644 --- a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c +++ b/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only -/* - * linux/drivers/net/ethernet/rtl838x_eth.c +/* linux/drivers/net/ethernet/rtl838x_eth.c * Copyright (C) 2020 B. Koblitz */ @@ -26,8 +25,7 @@ extern struct rtl83xx_soc_info soc_info; -/* - * Maximum number of RX rings is 8 on RTL83XX and 32 on the 93XX +/* Maximum number of RX rings is 8 on RTL83XX and 32 on the 93XX * The ring is assigned by switch based on packet/port priortity * Maximum number of TX rings is 2, Ring 2 being the high priority * ring on the RTL93xx SoCs. MAX_RXLEN gives the maximum length @@ -179,9 +177,9 @@ struct rtl838x_rx_q { struct rtl838x_eth_priv { struct net_device *netdev; struct platform_device *pdev; - void *membase; - spinlock_t lock; - struct mii_bus *mii_bus; + void *membase; + spinlock_t lock; + struct mii_bus *mii_bus; struct rtl838x_rx_q rx_qs[MAX_RXRINGS]; struct phylink *phylink; struct phylink_config phylink_config; @@ -213,8 +211,7 @@ extern int rtl930x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val); extern int rtl931x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val); extern int rtl931x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val); -/* - * On the RTL93XX, the RTL93XX_DMA_IF_RX_RING_CNTR track the fill level of +/* On the RTL93XX, the RTL93XX_DMA_IF_RX_RING_CNTR track the fill level of * the rings. Writing x into these registers substracts x from its content. * When the content reaches the ring size, the ASIC no longer adds * packets to this receive queue. @@ -329,8 +326,7 @@ bool rtl931x_decode_tag(struct p_hdr *h, struct dsa_tag *t) return t->l2_offloaded; } -/* - * Discard the RX ring-buffers, called as part of the net-ISR +/* Discard the RX ring-buffers, called as part of the net-ISR * when the buffer runs over */ static void rtl838x_rb_cleanup(struct rtl838x_eth_priv *priv, int status) @@ -349,15 +345,16 @@ static void rtl838x_rb_cleanup(struct rtl838x_eth_priv *priv, int status) pr_debug("Got something: %d\n", ring->c_rx[r]); h = &ring->rx_header[r][ring->c_rx[r]]; memset(h, 0, sizeof(struct p_hdr)); - h->buf = (u8 *)KSEG1ADDR(ring->rx_space - + r * priv->rxringlen * RING_BUFFER - + ring->c_rx[r] * RING_BUFFER); + h->buf = (u8 *)KSEG1ADDR(ring->rx_space + + r * priv->rxringlen * RING_BUFFER + + ring->c_rx[r] * RING_BUFFER); h->size = RING_BUFFER; /* make sure the header is visible to the ASIC */ mb(); - ring->rx_r[r][ring->c_rx[r]] = KSEG1ADDR(h) | 0x1 - | (ring->c_rx[r] == (priv->rxringlen - 1) ? WRAP : 0x1); + ring->rx_r[r][ring->c_rx[r]] = KSEG1ADDR(h) | 0x1 | (ring->c_rx[r] == (priv->rxringlen - 1) ? + WRAP : + 0x1); ring->c_rx[r] = (ring->c_rx[r] + 1) % priv->rxringlen; } while (&ring->rx_r[r][ring->c_rx[r]] != last); } @@ -520,7 +517,7 @@ static irqreturn_t rtl93xx_net_irq(int irq, void *dev_id) /* RX buffer overrun */ if (status_rx_r) { pr_debug("RX buffer overrun: status %x, mask: %x\n", - status_rx_r, sw_r32(priv->r->dma_if_intr_rx_runout_msk)); + status_rx_r, sw_r32(priv->r->dma_if_intr_rx_runout_msk)); sw_w32(status_rx_r, priv->r->dma_if_intr_rx_runout_sts); rtl838x_rb_cleanup(priv, status_rx_r); } @@ -645,7 +642,7 @@ static void rtl838x_hw_reset(struct rtl838x_eth_priv *priv) u32 int_saved, nbuf; u32 reset_mask; int i, pos; - + pr_info("RESETTING %x, CPU_PORT %d\n", priv->family_id, priv->cpu_port); sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(priv->cpu_port)); mdelay(100); @@ -699,7 +696,7 @@ static void rtl838x_hw_reset(struct rtl838x_eth_priv *priv) pos = (i % 3) * 10; sw_w32_mask(0x3ff << pos, 0, priv->r->dma_if_rx_ring_size(i)); sw_w32_mask(0x3ff << pos, priv->rxringlen, - priv->r->dma_if_rx_ring_cntr(i)); + priv->r->dma_if_rx_ring_cntr(i)); } } @@ -821,20 +818,20 @@ static void rtl93xx_hw_en_rxtx(struct rtl838x_eth_priv *priv) static void rtl838x_setup_ring_buffer(struct rtl838x_eth_priv *priv, struct ring_b *ring) { int i, j; - struct p_hdr *h; for (i = 0; i < priv->rxrings; i++) { for (j = 0; j < priv->rxringlen; j++) { h = &ring->rx_header[i][j]; memset(h, 0, sizeof(struct p_hdr)); - h->buf = (u8 *)KSEG1ADDR(ring->rx_space - + i * priv->rxringlen * RING_BUFFER - + j * RING_BUFFER); + h->buf = (u8 *)KSEG1ADDR(ring->rx_space + + i * priv->rxringlen * RING_BUFFER + + j * RING_BUFFER); h->size = RING_BUFFER; /* All rings owned by switch, last one wraps */ - ring->rx_r[i][j] = KSEG1ADDR(h) | 1 - | (j == (priv->rxringlen - 1) ? WRAP : 0); + ring->rx_r[i][j] = KSEG1ADDR(h) | 1 | (j == (priv->rxringlen - 1) ? + WRAP : + 0); } ring->c_rx[i] = 0; } @@ -843,14 +840,14 @@ static void rtl838x_setup_ring_buffer(struct rtl838x_eth_priv *priv, struct ring for (j = 0; j < TXRINGLEN; j++) { h = &ring->tx_header[i][j]; memset(h, 0, sizeof(struct p_hdr)); - h->buf = (u8 *)KSEG1ADDR(ring->tx_space - + i * TXRINGLEN * RING_BUFFER - + j * RING_BUFFER); + h->buf = (u8 *)KSEG1ADDR(ring->tx_space + + i * TXRINGLEN * RING_BUFFER + + j * RING_BUFFER); h->size = RING_BUFFER; ring->tx_r[i][j] = KSEG1ADDR(&ring->tx_header[i][j]); } /* Last header is wrapping around */ - ring->tx_r[i][j-1] |= WRAP; + ring->tx_r[i][j - 1] |= WRAP; ring->c_tx[i] = 0; } } @@ -1032,8 +1029,7 @@ static int rtl838x_eth_stop(struct net_device *ndev) static void rtl838x_eth_set_multicast_list(struct net_device *ndev) { - /* - * Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) + /* Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) * CTRL_0_FULL = GENMASK(21, 0) = 0x3FFFFF */ if (!(ndev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { @@ -1050,8 +1046,7 @@ static void rtl838x_eth_set_multicast_list(struct net_device *ndev) static void rtl839x_eth_set_multicast_list(struct net_device *ndev) { - /* - * Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) + /* Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) * CTRL_0_FULL = GENMASK(31, 2) = 0xFFFFFFFC * Lower two bits are reserved, corresponding to RMA 01-80-C2-00-00-00 * CTRL_1_FULL = CTRL_2_FULL = GENMASK(31, 0) @@ -1077,8 +1072,7 @@ static void rtl839x_eth_set_multicast_list(struct net_device *ndev) static void rtl930x_eth_set_multicast_list(struct net_device *ndev) { - /* - * Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) + /* Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) * CTRL_0_FULL = GENMASK(31, 2) = 0xFFFFFFFC * Lower two bits are reserved, corresponding to RMA 01-80-C2-00-00-00 * CTRL_1_FULL = CTRL_2_FULL = GENMASK(31, 0) @@ -1096,8 +1090,7 @@ static void rtl930x_eth_set_multicast_list(struct net_device *ndev) static void rtl931x_eth_set_multicast_list(struct net_device *ndev) { - /* - * Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) + /* Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) * CTRL_0_FULL = GENMASK(31, 2) = 0xFFFFFFFC * Lower two bits are reserved, corresponding to RMA 01-80-C2-00-00-00. * CTRL_1_FULL = CTRL_2_FULL = GENMASK(31, 0) @@ -1147,13 +1140,14 @@ static int rtl838x_eth_tx(struct sk_buff *skb, struct net_device *dev) len = skb->len; /* Check for DSA tagging at the end of the buffer */ - if (netdev_uses_dsa(dev) && skb->data[len-4] == 0x80 - && skb->data[len-3] < priv->cpu_port - && skb->data[len-2] == 0x10 - && skb->data[len-1] == 0x00) { + if (netdev_uses_dsa(dev) && + skb->data[len - 4] == 0x80 && + skb->data[len - 3] < priv->cpu_port && + skb->data[len - 2] == 0x10 && + skb->data[len - 1] == 0x00) { /* Reuse tag space for CRC if possible */ - dest_port = skb->data[len-3]; - skb->data[len-4] = skb->data[len-3] = skb->data[len-2] = skb->data[len-1] = 0x00; + dest_port = skb->data[len - 3]; + skb->data[len - 4] = skb->data[len - 3] = skb->data[len - 2] = skb->data[len - 1] = 0x00; len -= 4; } @@ -1198,8 +1192,7 @@ static int rtl838x_eth_tx(struct sk_buff *skb, struct net_device *dev) } /* Tell switch to send data */ - if (priv->family_id == RTL9310_FAMILY_ID - || priv->family_id == RTL9300_FAMILY_ID) { + if (priv->family_id == RTL9310_FAMILY_ID || priv->family_id == RTL9300_FAMILY_ID) { // Ring ID q == 0: Low priority, Ring ID = 1: High prio queue if (!q) sw_w32_mask(0, BIT(2), priv->r->dma_if_ctrl); @@ -1218,13 +1211,14 @@ static int rtl838x_eth_tx(struct sk_buff *skb, struct net_device *dev) dev_warn(&priv->pdev->dev, "Data is owned by switch\n"); ret = NETDEV_TX_BUSY; } + txdone: spin_unlock_irqrestore(&priv->lock, flags); + return ret; } -/* - * Return queue number for TX. On the RTL83XX, these queues have equal priority +/* Return queue number for TX. On the RTL83XX, these queues have equal priority * so we do round-robin */ u16 rtl83xx_pick_tx_queue(struct net_device *dev, struct sk_buff *skb, @@ -1236,14 +1230,14 @@ u16 rtl83xx_pick_tx_queue(struct net_device *dev, struct sk_buff *skb, return last % TXRINGS; } -/* - * Return queue number for TX. On the RTL93XX, queue 1 is the high priority queue +/* Return queue number for TX. On the RTL93XX, queue 1 is the high priority queue */ u16 rtl93xx_pick_tx_queue(struct net_device *dev, struct sk_buff *skb, struct net_device *sb_dev) { if (skb->priority >= TC_PRIO_CONTROL) return 1; + return 0; } @@ -1291,7 +1285,7 @@ static int rtl838x_hw_receive(struct net_device *dev, int r, int budget) skb_reserve(skb, NET_IP_ALIGN); if (likely(skb)) { - /* BUG: Prevent bug on RTL838x SoCs*/ + /* BUG: Prevent bug on RTL838x SoCs */ if (priv->family_id == RTL8380_FAMILY_ID) { sw_w32(0xffffffff, priv->r->dma_if_rx_ring_size(0)); for (i = 0; i < priv->rxrings; i++) { @@ -1308,12 +1302,12 @@ static int rtl838x_hw_receive(struct net_device *dev, int r, int budget) /* Overwrite CRC with cpu_tag */ if (dsa) { priv->r->decode_tag(h, &tag); - skb->data[len-4] = 0x80; - skb->data[len-3] = tag.port; - skb->data[len-2] = 0x10; - skb->data[len-1] = 0x00; + skb->data[len - 4] = 0x80; + skb->data[len - 3] = tag.port; + skb->data[len - 2] = 0x10; + skb->data[len - 1] = 0x00; if (tag.l2_offloaded) - skb->data[len-3] |= 0x40; + skb->data[len - 3] |= 0x40; } if (tag.queue >= 0) @@ -1342,8 +1336,9 @@ static int rtl838x_hw_receive(struct net_device *dev, int r, int budget) h->buf = data; h->size = RING_BUFFER; - ring->rx_r[r][ring->c_rx[r]] = KSEG1ADDR(h) | 0x1 - | (ring->c_rx[r] == (priv->rxringlen - 1) ? WRAP : 0x1); + ring->rx_r[r][ring->c_rx[r]] = KSEG1ADDR(h) | 0x1 | (ring->c_rx[r] == (priv->rxringlen - 1) ? + WRAP : + 0x1); ring->c_rx[r] = (ring->c_rx[r] + 1) % priv->rxringlen; last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur + r * 4)); } while (&ring->rx_r[r][ring->c_rx[r]] != last && work_done < budget); @@ -1382,6 +1377,7 @@ static int rtl838x_poll_rx(struct napi_struct *napi, int budget) else sw_w32_mask(0, 0xf00ff | BIT(r + 8), priv->r->dma_if_intr_msk); } + return work_done; } @@ -1568,6 +1564,7 @@ static int rtl838x_set_mac_address(struct net_device *dev, void *p) rtl838x_set_mac_hw(dev, mac); pr_info("Using MAC %08x%08x\n", sw_r32(priv->r->mac), sw_r32(priv->r->mac + 4)); + return 0; } @@ -1584,7 +1581,7 @@ static int rtl8380_init_mac(struct rtl838x_eth_priv *priv) if (priv->family_id == 0x8390) return rtl8390_init_mac(priv); - // At present we do not know how to set up EEE on any other SoC than RTL8380 + /* At present we do not know how to set up EEE on any other SoC than RTL8380 */ if (priv->family_id != 0x8380) return 0; @@ -1602,6 +1599,7 @@ static int rtl8380_init_mac(struct rtl838x_eth_priv *priv) for (i = 8; i <= 28; i++) sw_w32(0, 0xd57c + i * 0x80); } + return 0; } @@ -1611,6 +1609,7 @@ static int rtl838x_get_link_ksettings(struct net_device *ndev, struct rtl838x_eth_priv *priv = netdev_priv(ndev); pr_debug("%s called\n", __func__); + return phylink_ethtool_ksettings_get(priv->phylink, cmd); } @@ -1620,6 +1619,7 @@ static int rtl838x_set_link_ksettings(struct net_device *ndev, struct rtl838x_eth_priv *priv = netdev_priv(ndev); pr_debug("%s called\n", __func__); + return phylink_ethtool_ksettings_set(priv->phylink, cmd); } @@ -1645,6 +1645,7 @@ static int rtl838x_mdio_read_paged(struct mii_bus *bus, int mii_id, u16 page, in } if (err) return err; + return val; } @@ -1673,8 +1674,10 @@ static int rtl839x_mdio_read_paged(struct mii_bus *bus, int mii_id, u16 page, in err = rtl839x_read_phy(mii_id, page, regnum, &val); pr_debug("PHY: %d register %x read %x, err %d\n", mii_id, regnum, val, err); } - if (err) + + if (err) return err; + return val; } @@ -1703,8 +1706,10 @@ static int rtl930x_mdio_read_paged(struct mii_bus *bus, int mii_id, u16 page, in err = rtl930x_read_phy(mii_id, page, regnum, &val); pr_debug("PHY: %d register %x read %x, err %d\n", mii_id, regnum, val, err); } + if (err) return err; + return val; } @@ -1744,6 +1749,7 @@ static int rtl931x_mdio_read_paged(struct mii_bus *bus, int mii_id, u16 page, in if (err) return err; + return val; } @@ -1777,6 +1783,7 @@ static int rtl838x_mdio_write_paged(struct mii_bus *bus, int mii_id, u16 page, } err = rtl838x_write_phy(mii_id, page, regnum, value); pr_debug("PHY: %d register %x write %x, err %d\n", mii_id, regnum, value, err); + return err; } @@ -1807,6 +1814,7 @@ static int rtl839x_mdio_write_paged(struct mii_bus *bus, int mii_id, u16 page, err = rtl839x_write_phy(mii_id, page, regnum, value); pr_debug("PHY: %d register %x write %x, err %d\n", mii_id, regnum, value, err); + return err; } @@ -1831,6 +1839,7 @@ static int rtl930x_mdio_write_paged(struct mii_bus *bus, int mii_id, u16 page, err = rtl930x_write_phy(mii_id, page, regnum, value); pr_debug("PHY: %d register %x write %x, err %d\n", mii_id, regnum, value, err); + return err; } @@ -1861,6 +1870,7 @@ static int rtl931x_mdio_write_paged(struct mii_bus *bus, int mii_id, u16 page, err = rtl931x_write_phy(mii_id, page, regnum, value); pr_debug("PHY: %d register %x write %x, err %d\n", mii_id, regnum, value, err); + return err; } @@ -1951,7 +1961,6 @@ static int rtl930x_mdio_reset(struct mii_bus *bus) switch (priv->interfaces[i]) { case PHY_INTERFACE_MODE_10GBASER: break; // Serdes: Value = 0 - case PHY_INTERFACE_MODE_HSGMII: private_poll_mask |= BIT(i); // fallthrough @@ -1959,12 +1968,10 @@ static int rtl930x_mdio_reset(struct mii_bus *bus) v |= BIT(mac_type_bit[i]); uses_usxgmii = true; break; - case PHY_INTERFACE_MODE_QSGMII: private_poll_mask |= BIT(i); v |= 3 << mac_type_bit[i]; break; - default: break; } @@ -1976,7 +1983,8 @@ static int rtl930x_mdio_reset(struct mii_bus *bus) /* The following magic values are found in the port configuration, they seem to * define different ways of polling a PHY. The below is for the Aquantia PHYs of - * the XGS1250 and the RTL8226 of the XGS1210 */ + * the XGS1250 and the RTL8226 of the XGS1210 + */ if (uses_usxgmii) { sw_w32(0x01010000, RTL930X_SMI_10GPHY_POLLING_REG0_CFG); sw_w32(0x01E7C400, RTL930X_SMI_10GPHY_POLLING_REG9_CFG); @@ -2004,6 +2012,7 @@ static int rtl930x_mdio_reset(struct mii_bus *bus) sw_r32(RTL930X_SMI_10GPHY_POLLING_REG10_CFG)); pr_debug("%s: RTL930X_SMI_PRVTE_POLLING_CTRL %08x\n", __func__, sw_r32(RTL930X_SMI_PRVTE_POLLING_CTRL)); + return 0; } @@ -2057,10 +2066,10 @@ static int rtl931x_mdio_reset(struct mii_bus *bus) pr_info("c45_mask: %08x, RTL931X_SMI_GLB_CTRL0 was %X", c45_mask, sw_r32(RTL931X_SMI_GLB_CTRL0)); /* We have a 10G PHY enable polling - sw_w32(0x01010000, RTL931X_SMI_10GPHY_POLLING_SEL2); - sw_w32(0x01E7C400, RTL931X_SMI_10GPHY_POLLING_SEL3); - sw_w32(0x01E7E820, RTL931X_SMI_10GPHY_POLLING_SEL4); -*/ + * sw_w32(0x01010000, RTL931X_SMI_10GPHY_POLLING_SEL2); + * sw_w32(0x01E7C400, RTL931X_SMI_10GPHY_POLLING_SEL3); + * sw_w32(0x01E7E820, RTL931X_SMI_10GPHY_POLLING_SEL4); + */ sw_w32_mask(0xff, c45_mask, RTL931X_SMI_GLB_CTRL1); return 0; @@ -2221,6 +2230,7 @@ static int rtl838x_mdio_init(struct rtl838x_eth_priv *priv) err_put_node: of_node_put(mii_np); + return ret; } @@ -2358,7 +2368,7 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) return -EINVAL; } - rxrings = (soc_info.family == RTL8380_FAMILY_ID + rxrings = (soc_info.family == RTL8380_FAMILY_ID || soc_info.family == RTL8390_FAMILY_ID) ? 8 : 32; rxrings = rxrings > MAX_RXRINGS ? MAX_RXRINGS : rxrings; rxringlen = MAX_ENTRIES / rxrings; @@ -2392,9 +2402,9 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) } /* Allocate buffer memory */ - priv->membase = dmam_alloc_coherent(&pdev->dev, rxrings * rxringlen * RING_BUFFER - + sizeof(struct ring_b) + sizeof(struct notify_b), - (void *)&dev->mem_start, GFP_KERNEL); + priv->membase = dmam_alloc_coherent(&pdev->dev, rxrings * rxringlen * RING_BUFFER + + sizeof(struct ring_b) + sizeof(struct notify_b), + (void *)&dev->mem_start, GFP_KERNEL); if (!priv->membase) { dev_err(&pdev->dev, "cannot allocate DMA buffer\n"); err = -ENOMEM; @@ -2469,7 +2479,7 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) rtl8380_init_mac(priv); - /* try to get mac address in the following order: + /* Try to get mac address in the following order: * 1) from device tree data * 2) from internal registers set by bootloader */ @@ -2540,6 +2550,7 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) err_free: pr_err("Error setting up netdev, freeing it again.\n"); free_netdev(dev); + return err; } @@ -2562,6 +2573,7 @@ static int rtl838x_eth_remove(struct platform_device *pdev) unregister_netdev(dev); free_netdev(dev); } + return 0; } diff --git a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.h b/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.h index d00d11d0c8..fbd2bcadd6 100644 --- a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.h +++ b/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.h @@ -3,9 +3,7 @@ #ifndef _RTL838X_ETH_H #define _RTL838X_ETH_H -/* - * Register definition - */ +/* Register definition */ /* Per port MAC control */ #define RTL838X_MAC_PORT_CTRL (0xd560) diff --git a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c index 491ceb48b6..38012d75d0 100644 --- a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c +++ b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c @@ -36,8 +36,7 @@ extern struct mutex smi_lock; #define RTL821X_PAGE_STATE 0x0b80 #define RTL821X_PAGE_PATCH 0x0b82 -/* - * Using the special page 0xfff with the MDIO controller found in +/* Using the special page 0xfff with the MDIO controller found in * RealTek SoCs allows to access the PHY in RAW mode, ie. bypassing * the cache and paging engine of the MDIO controller. */ @@ -55,8 +54,7 @@ extern struct mutex smi_lock; #define RTL9300_PHY_ID_MASK 0xf0ffffff -/* - * This lock protects the state of the SoC automatically polling the PHYs over the SMI +/* This lock protects the state of the SoC automatically polling the PHYs over the SMI * bus to detect e.g. link and media changes. For operations on the PHYs such as * patching or other configuration changes such as EEE, polling needs to be disabled * since otherwise these operations may fails or lead to unpredictable results. @@ -83,7 +81,7 @@ static u64 disable_polling(int port) saved_state <<= 32; saved_state |= sw_r32(RTL839X_SMI_PORT_POLLING_CTRL); sw_w32_mask(BIT(port % 32), 0, - RTL839X_SMI_PORT_POLLING_CTRL + ((port >> 5) << 2)); + RTL839X_SMI_PORT_POLLING_CTRL + ((port >> 5) << 2)); break; case RTL9300_FAMILY_ID: saved_state = sw_r32(RTL930X_SMI_POLL_CTRL); @@ -150,8 +148,7 @@ u16 rtl9300_sds_regs[] = { 0x0194, 0x0194, 0x0194, 0x0194, 0x02a0, 0x02a0, 0x02a 0x02A4, 0x02A4, 0x0198, 0x0198 }; u8 rtl9300_sds_lsb[] = { 0, 6, 12, 18, 0, 6, 12, 18, 0, 6, 0, 6}; -/* - * Reset the SerDes by powering it off and set a new operations mode +/* Reset the SerDes by powering it off and set a new operations mode * of the SerDes. 0x1f is off. Other modes are * 0x02: SGMII 0x04: 1000BX_FIBER 0x05: FIBER100 * 0x06: QSGMII 0x09: RSGMII 0x0d: USXGMII @@ -176,7 +173,7 @@ void rtl9300_sds_rst(int sds_num, u32 mode) mdelay(10); pr_debug("%s: 194:%08x 198:%08x 2a0:%08x 2a4:%08x\n", __func__, - sw_r32(0x194), sw_r32(0x198), sw_r32(0x2a0), sw_r32(0x2a4)); + sw_r32(0x194), sw_r32(0x198), sw_r32(0x2a0), sw_r32(0x2a4)); } void rtl9300_sds_set(int sds_num, u32 mode) @@ -192,7 +189,7 @@ void rtl9300_sds_set(int sds_num, u32 mode) mdelay(10); pr_debug("%s: 194:%08x 198:%08x 2a0:%08x 2a4:%08x\n", __func__, - sw_r32(0x194), sw_r32(0x198), sw_r32(0x2a0), sw_r32(0x2a4)); + sw_r32(0x194), sw_r32(0x198), sw_r32(0x2a0), sw_r32(0x2a4)); } u32 rtl9300_sds_mode_get(int sds_num) @@ -210,8 +207,7 @@ u32 rtl9300_sds_mode_get(int sds_num) return v & 0x1f; } -/* - * On the RTL839x family of SoCs with inbuilt SerDes, these SerDes are accessed through +/* On the RTL839x family of SoCs with inbuilt SerDes, these SerDes are accessed through * a 2048 bit register that holds the contents of the PHY being simulated by the SoC. */ int rtl839x_read_sds_phy(int phy_addr, int phy_reg) @@ -223,8 +219,7 @@ int rtl839x_read_sds_phy(int phy_addr, int phy_reg) if (phy_addr == 49) offset = 0x100; - /* - * For the RTL8393 internal SerDes, we simulate a PHY ID in registers 2/3 + /* For the RTL8393 internal SerDes, we simulate a PHY ID in registers 2/3 * which would otherwise read as 0. */ if (soc_info.id == 0x8393) { @@ -234,8 +229,7 @@ int rtl839x_read_sds_phy(int phy_addr, int phy_reg) return 0x8393; } - /* - * Register RTL839X_SDS12_13_XSG0 is 2048 bit broad, the MSB (bit 15) of the + /* Register RTL839X_SDS12_13_XSG0 is 2048 bit broad, the MSB (bit 15) of the * 0th PHY register is bit 1023 (in byte 0x80). Because PHY-registers are 16 * bit broad, we offset by reg << 1. In the SoC 2 registers are stored in * one 32 bit register. @@ -247,11 +241,11 @@ int rtl839x_read_sds_phy(int phy_addr, int phy_reg) val = (val >> 16) & 0xffff; else val &= 0xffff; + return val; } -/* - * On the RTL930x family of SoCs, the internal SerDes are accessed through an IO +/* On the RTL930x family of SoCs, the internal SerDes are accessed through an IO * register which simulates commands to an internal MDIO bus. */ int rtl930x_read_sds_phy(int phy_addr, int page, int phy_reg) @@ -314,6 +308,7 @@ int rtl931x_read_sds_phy(int phy_addr, int page, int phy_reg) return -EIO; pr_debug("%s: returning %04x\n", __func__, sw_r32(RTL931X_SERDES_INDRT_DATA_CTRL) & 0xffff); + return sw_r32(RTL931X_SERDES_INDRT_DATA_CTRL) & 0xffff; } @@ -326,7 +321,7 @@ int rtl931x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v) sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL); sw_w32(v, RTL931X_SERDES_INDRT_DATA_CTRL); - + cmd = sw_r32(RTL931X_SERDES_INDRT_ACCESS_CTRL) | 0x3; sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL); @@ -342,8 +337,7 @@ int rtl931x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v) return 0; } -/* - * On the RTL838x SoCs, the internal SerDes is accessed through direct access to +/* On the RTL838x SoCs, the internal SerDes is accessed through direct access to * standard PHY registers, where a 32 bit register holds a 16 bit word as found * in a standard page 0 of a PHY */ @@ -449,9 +443,9 @@ static int rtl8226_read_status(struct phy_device *phydev) // } // Link status must be read twice - for (i = 0; i < 2; i++) { + for (i = 0; i < 2; i++) val = phy_read_mmd(phydev, MMD_VEND2, 0xA402); - } + phydev->link = val & BIT(2) ? 1 : 0; if (!phydev->link) goto out; @@ -486,6 +480,7 @@ static int rtl8226_read_status(struct phy_device *phydev) default: break; } + out: return ret; } @@ -566,7 +561,7 @@ out: } static int rtl8226_get_eee(struct phy_device *phydev, - struct ethtool_eee *e) + struct ethtool_eee *e) { u32 val; int addr = phydev->mdio.addr; @@ -706,6 +701,7 @@ static int rtl8390_configure_generic(struct phy_device *phydev) /* Internal RTL8218B, version 2 */ phydev_info(phydev, "Detected unknown %x\n", val); + return 0; } @@ -744,11 +740,8 @@ static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev) return -1; } - rtl838x_6275B_intPhy_perport = (void *)h + sizeof(struct fw_header) - + h->parts[8].start; - - rtl8218b_6276B_hwEsd_perport = (void *)h + sizeof(struct fw_header) - + h->parts[9].start; + rtl838x_6275B_intPhy_perport = (void *)h + sizeof(struct fw_header) + h->parts[8].start; + rtl8218b_6276B_hwEsd_perport = (void *)h + sizeof(struct fw_header) + h->parts[9].start; if (sw_r32(RTL838X_DMY_REG31) == 0x1) ipd_flag = 1; @@ -774,8 +767,8 @@ static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev) } if (i >= 100) { phydev_err(phydev, - "ERROR: Port %d not ready for patch.\n", - mac + p); + "ERROR: Port %d not ready for patch.\n", + mac + p); return -1; } } @@ -783,18 +776,19 @@ static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev) i = 0; while (rtl838x_6275B_intPhy_perport[i * 2]) { phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, - rtl838x_6275B_intPhy_perport[i * 2], - rtl838x_6275B_intPhy_perport[i * 2 + 1]); + rtl838x_6275B_intPhy_perport[i * 2], + rtl838x_6275B_intPhy_perport[i * 2 + 1]); i++; } i = 0; while (rtl8218b_6276B_hwEsd_perport[i * 2]) { phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, - rtl8218b_6276B_hwEsd_perport[i * 2], - rtl8218b_6276B_hwEsd_perport[i * 2 + 1]); + rtl8218b_6276B_hwEsd_perport[i * 2], + rtl8218b_6276B_hwEsd_perport[i * 2 + 1]); i++; } } + return 0; } @@ -836,14 +830,9 @@ static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev) return -1; } - rtl8380_rtl8218b_perchip = (void *)h + sizeof(struct fw_header) - + h->parts[0].start; - - rtl8218B_6276B_rtl8380_perport = (void *)h + sizeof(struct fw_header) - + h->parts[1].start; - - rtl8380_rtl8218b_perport = (void *)h + sizeof(struct fw_header) - + h->parts[2].start; + rtl8380_rtl8218b_perchip = (void *)h + sizeof(struct fw_header) + h->parts[0].start; + rtl8218B_6276B_rtl8380_perport = (void *)h + sizeof(struct fw_header) + h->parts[1].start; + rtl8380_rtl8218b_perport = (void *)h + sizeof(struct fw_header) + h->parts[2].start; val = phy_read(phydev, 0); if (val & (1 << 11)) @@ -861,11 +850,11 @@ static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev) phydev_info(phydev, "Detected chip revision %04x\n", val); i = 0; - while (rtl8380_rtl8218b_perchip[i * 3] - && rtl8380_rtl8218b_perchip[i * 3 + 1]) { - phy_package_port_write_paged(phydev, rtl8380_rtl8218b_perchip[i * 3], - RTL83XX_PAGE_RAW, rtl8380_rtl8218b_perchip[i * 3 + 1], - rtl8380_rtl8218b_perchip[i * 3 + 2]); + while (rtl8380_rtl8218b_perchip[i * 3] && + rtl8380_rtl8218b_perchip[i * 3 + 1]) { + phy_package_port_write_paged(phydev, rtl8380_rtl8218b_perchip[i * 3], + RTL83XX_PAGE_RAW, rtl8380_rtl8218b_perchip[i * 3 + 1], + rtl8380_rtl8218b_perchip[i * 3 + 2]); i++; } @@ -911,11 +900,11 @@ static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev) i = 0; while (rtl8218B_6276B_rtl8380_perport[i * 2]) { phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8218B_6276B_rtl8380_perport[i * 2], - rtl8218B_6276B_rtl8380_perport[i * 2 + 1]); + rtl8218B_6276B_rtl8380_perport[i * 2 + 1]); i++; } - /*Disable broadcast ID*/ + /* Disable broadcast ID */ rtl821x_phy_setup_package_broadcast(phydev, false); return 0; @@ -1036,6 +1025,7 @@ static int rtl8214fc_set_port(struct phy_device *phydev, int port) pr_debug("%s port %d to %d\n", __func__, addr, port); rtl8214fc_media_set(phydev, is_fibre); + return 0; } @@ -1046,11 +1036,11 @@ static int rtl8214fc_get_port(struct phy_device *phydev) pr_debug("%s: port %d\n", __func__, addr); if (rtl8214fc_media_is_fibre(phydev)) return PORT_FIBRE; + return PORT_MII; } -/* - * Enable EEE on the RTL8218B PHYs +/* Enable EEE on the RTL8218B PHYs * The method used is not the preferred way (which would be based on the MAC-EEE state, * but the only way that works since the kernel first enables EEE in the MAC * and then sets up the PHY. The MAC-based approach would require the oppsite. @@ -1087,12 +1077,12 @@ void rtl8218d_eee_set(struct phy_device *phydev, bool enable) phy_write(phydev, 0, val); } - /* GPHY page back to auto*/ + /* GPHY page back to auto */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); } static int rtl8218b_get_eee(struct phy_device *phydev, - struct ethtool_eee *e) + struct ethtool_eee *e) { u32 val; int addr = phydev->mdio.addr; @@ -1120,7 +1110,7 @@ static int rtl8218b_get_eee(struct phy_device *phydev, } static int rtl8218d_get_eee(struct phy_device *phydev, - struct ethtool_eee *e) + struct ethtool_eee *e) { u32 val; int addr = phydev->mdio.addr; @@ -1142,7 +1132,7 @@ static int rtl8218d_get_eee(struct phy_device *phydev, } static int rtl8214fc_set_eee(struct phy_device *phydev, - struct ethtool_eee *e) + struct ethtool_eee *e) { u32 poll_state; int port = phydev->mdio.addr; @@ -1190,7 +1180,7 @@ static int rtl8214fc_set_eee(struct phy_device *phydev, phy_write(phydev, 0, val); } - /* GPHY page back to auto*/ + /* GPHY page back to auto */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); resume_polling(poll_state); @@ -1199,7 +1189,7 @@ static int rtl8214fc_set_eee(struct phy_device *phydev, } static int rtl8214fc_get_eee(struct phy_device *phydev, - struct ethtool_eee *e) + struct ethtool_eee *e) { int addr = phydev->mdio.addr; @@ -1257,7 +1247,7 @@ static int rtl8218b_set_eee(struct phy_device *phydev, struct ethtool_eee *e) phy_write(phydev, 0, val); } - /* GPHY page back to auto*/ + /* GPHY page back to auto */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); pr_info("%s done\n", __func__); @@ -1302,6 +1292,7 @@ static int rtl8380_configure_rtl8214c(struct phy_device *phydev) /* GPHY auto conf */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); + return 0; } @@ -1339,11 +1330,9 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev) return -1; } - rtl8380_rtl8214fc_perchip = (void *)h + sizeof(struct fw_header) - + h->parts[0].start; + rtl8380_rtl8214fc_perchip = (void *)h + sizeof(struct fw_header) + h->parts[0].start; - rtl8380_rtl8214fc_perport = (void *)h + sizeof(struct fw_header) - + h->parts[1].start; + rtl8380_rtl8214fc_perport = (void *)h + sizeof(struct fw_header) + h->parts[1].start; /* detect phy version */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, 27, 0x0004); @@ -1359,14 +1348,13 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev) phy_write_paged(phydev, 0, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); i = 0; - while (rtl8380_rtl8214fc_perchip[i * 3] - && rtl8380_rtl8214fc_perchip[i * 3 + 1]) { + while (rtl8380_rtl8214fc_perchip[i * 3] && + rtl8380_rtl8214fc_perchip[i * 3 + 1]) { if (rtl8380_rtl8214fc_perchip[i * 3 + 1] == 0x1f) page = rtl8380_rtl8214fc_perchip[i * 3 + 2]; if (rtl8380_rtl8214fc_perchip[i * 3 + 1] == 0x13 && page == 0x260) { val = phy_read_paged(phydev, 0x260, 13); - val = (val & 0x1f00) | (rtl8380_rtl8214fc_perchip[i * 3 + 2] - & 0xe0ff); + val = (val & 0x1f00) | (rtl8380_rtl8214fc_perchip[i * 3 + 2] & 0xe0ff); phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8380_rtl8214fc_perchip[i * 3 + 1], val); } else { @@ -1428,11 +1416,11 @@ static int rtl8380_configure_rtl8214fc(struct phy_device *phydev) i = 0; while (rtl8380_rtl8214fc_perport[i * 2]) { phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8380_rtl8214fc_perport[i * 2], - rtl8380_rtl8214fc_perport[i * 2 + 1]); + rtl8380_rtl8214fc_perport[i * 2 + 1]); i++; } - /*Disable broadcast ID*/ + /* Disable broadcast ID */ rtl821x_phy_setup_package_broadcast(phydev, false); /* Auto medium selection */ @@ -1477,29 +1465,21 @@ static int rtl8380_configure_serdes(struct phy_device *phydev) return -1; } - rtl8380_sds_take_reset = (void *)h + sizeof(struct fw_header) - + h->parts[0].start; + rtl8380_sds_take_reset = (void *)h + sizeof(struct fw_header) + h->parts[0].start; - rtl8380_sds_common = (void *)h + sizeof(struct fw_header) - + h->parts[1].start; + rtl8380_sds_common = (void *)h + sizeof(struct fw_header) + h->parts[1].start; - rtl8380_sds01_qsgmii_6275b = (void *)h + sizeof(struct fw_header) - + h->parts[2].start; + rtl8380_sds01_qsgmii_6275b = (void *)h + sizeof(struct fw_header) + h->parts[2].start; - rtl8380_sds23_qsgmii_6275b = (void *)h + sizeof(struct fw_header) - + h->parts[3].start; + rtl8380_sds23_qsgmii_6275b = (void *)h + sizeof(struct fw_header) + h->parts[3].start; - rtl8380_sds4_fiber_6275b = (void *)h + sizeof(struct fw_header) - + h->parts[4].start; + rtl8380_sds4_fiber_6275b = (void *)h + sizeof(struct fw_header) + h->parts[4].start; - rtl8380_sds5_fiber_6275b = (void *)h + sizeof(struct fw_header) - + h->parts[5].start; + rtl8380_sds5_fiber_6275b = (void *)h + sizeof(struct fw_header) + h->parts[5].start; - rtl8380_sds_reset = (void *)h + sizeof(struct fw_header) - + h->parts[6].start; + rtl8380_sds_reset = (void *)h + sizeof(struct fw_header) + h->parts[6].start; - rtl8380_sds_release_reset = (void *)h + sizeof(struct fw_header) - + h->parts[7].start; + rtl8380_sds_release_reset = (void *)h + sizeof(struct fw_header) + h->parts[7].start; /* Back up serdes power off value */ sds_conf_value = sw_r32(RTL838X_SDS_CFG_REG); @@ -1538,7 +1518,7 @@ static int rtl8380_configure_serdes(struct phy_device *phydev) i = 0; while (rtl8380_sds01_qsgmii_6275b[2 * i]) { sw_w32(rtl8380_sds01_qsgmii_6275b[2 * i + 1], - rtl8380_sds01_qsgmii_6275b[2 * i]); + rtl8380_sds01_qsgmii_6275b[2 * i]); i++; } @@ -1576,6 +1556,7 @@ static int rtl8380_configure_serdes(struct phy_device *phydev) sw_w32(sds_conf_value, RTL838X_SDS_CFG_REG); pr_info("Configuration of SERDES done\n"); + return 0; } @@ -1647,7 +1628,7 @@ static int rtl9300_read_status(struct phy_device *phydev) mode = rtl9300_sds_mode_get(sds_num); pr_info("%s got SDS mode %02x\n", __func__, mode); - if (mode == 0x1a) { // 10GR mode + if (mode == 0x1a) { // 10GR mode status = rtl9300_sds_field_r(sds_num, 0x5, 0, 12, 12); latch_status = rtl9300_sds_field_r(sds_num, 0x4, 1, 2, 2); status |= rtl9300_sds_field_r(sds_num, 0x5, 0, 12, 12); @@ -1686,8 +1667,7 @@ void rtl930x_sds_rx_rst(int sds_num, phy_interface_t phy_if) rtl9300_sds_field_w(sds_num, page, 0x15, 4, 4, 0x0); } -/* - * Force PHY modes on 10GBit Serdes +/* Force PHY modes on 10GBit Serdes */ void rtl9300_force_sds_mode(int sds, phy_interface_t phy_if) { @@ -1803,6 +1783,7 @@ void rtl9300_force_sds_mode(int sds, phy_interface_t phy_if) if (cr_0 && cr_1 && cr_2) { u32 t; + if (phy_if != PHY_INTERFACE_MODE_10GBASER) break; @@ -1874,16 +1855,15 @@ void rtl9300_sds_tx_config(int sds, phy_interface_t phy_if) return; } - rtl9300_sds_field_w(sds, page, 0x1, 15, 11, pre_amp); - rtl9300_sds_field_w(sds, page, 0x7, 0, 0, pre_en); - rtl9300_sds_field_w(sds, page, 0x7, 8, 4, main_amp); - rtl9300_sds_field_w(sds, page, 0x6, 4, 0, post_amp); - rtl9300_sds_field_w(sds, page, 0x7, 3, 3, post_en); + rtl9300_sds_field_w(sds, page, 0x01, 15, 11, pre_amp); + rtl9300_sds_field_w(sds, page, 0x06, 4, 0, post_amp); + rtl9300_sds_field_w(sds, page, 0x07, 0, 0, pre_en); + rtl9300_sds_field_w(sds, page, 0x07, 3, 3, post_en); + rtl9300_sds_field_w(sds, page, 0x07, 8, 4, main_amp); rtl9300_sds_field_w(sds, page, 0x18, 15, 12, impedance); } -/* - * Wait for clock ready, this assumes the SerDes is in XGMII mode +/* Wait for clock ready, this assumes the SerDes is in XGMII mode * timeout is in ms */ int rtl9300_sds_clock_wait(int timeout) @@ -1932,8 +1912,8 @@ void rtl9300_sds_rxcal_dcvs_manual(u32 sds_num, u32 dcvs_id, bool manual, u32 dv switch(dcvs_id) { case 0: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 14, 14, 0x1); - rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 5, 5, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 4, 0, dvcs_list[1]); + rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 5, 5, dvcs_list[0]); + rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 4, 0, dvcs_list[1]); break; case 1: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 13, 13, 0x1); @@ -1943,22 +1923,22 @@ void rtl9300_sds_rxcal_dcvs_manual(u32 sds_num, u32 dcvs_id, bool manual, u32 dv case 2: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 12, 12, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 10, 10, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 9, 6, dvcs_list[1]); + rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 9, 6, dvcs_list[1]); break; case 3: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 11, 11, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 5, 5, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 4, 1, dvcs_list[1]); + rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 5, 5, dvcs_list[0]); + rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 4, 1, dvcs_list[1]); break; case 4: rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 15, 15, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 10, 10, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 9, 6, dvcs_list[1]); + rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 9, 6, dvcs_list[1]); break; case 5: rtl9300_sds_field_w(sds_num, 0x2e, 0x02, 11, 11, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 4, 4, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 3, 0, dvcs_list[1]); + rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 4, 4, dvcs_list[0]); + rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 3, 0, dvcs_list[1]); break; default: break; @@ -2012,8 +1992,8 @@ void rtl9300_sds_rxcal_dcvs_get(u32 sds_num, u32 dcvs_id, u32 dcvs_list[]) mdelay(1); // ##DCVS0 Read Out - dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); + dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); + dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 14, 14); break; @@ -2022,8 +2002,8 @@ void rtl9300_sds_rxcal_dcvs_get(u32 sds_num, u32 dcvs_id, u32 dcvs_list[]) mdelay(1); // ##DCVS0 Read Out - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); + dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); + dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 13, 13); break; @@ -2032,8 +2012,8 @@ void rtl9300_sds_rxcal_dcvs_get(u32 sds_num, u32 dcvs_id, u32 dcvs_list[]) mdelay(1); // ##DCVS0 Read Out - dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); + dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); + dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 12, 12); break; case 3: @@ -2041,9 +2021,9 @@ void rtl9300_sds_rxcal_dcvs_get(u32 sds_num, u32 dcvs_id, u32 dcvs_list[]) mdelay(1); // ##DCVS0 Read Out - dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); - dcvs_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 11, 11); + dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); + dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); + dcvs_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 11, 11); break; case 4: @@ -2051,8 +2031,8 @@ void rtl9300_sds_rxcal_dcvs_get(u32 sds_num, u32 dcvs_id, u32 dcvs_list[]) mdelay(1); // ##DCVS0 Read Out - dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); + dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); + dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x01, 15, 15); break; @@ -2061,9 +2041,9 @@ void rtl9300_sds_rxcal_dcvs_get(u32 sds_num, u32 dcvs_id, u32 dcvs_list[]) mdelay(1); // ##DCVS0 Read Out - dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); - dcvs_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x02, 11, 11); + dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); + dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); + dcvs_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x02, 11, 11); break; default: @@ -2162,8 +2142,8 @@ void rtl9300_sds_rxcal_vth_manual(u32 sds_num, bool manual, u32 vth_list[]) { if (manual) { rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, 13, 13, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x13, 5, 3, vth_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x13, 2, 0, vth_list[1]); + rtl9300_sds_field_w(sds_num, 0x2e, 0x13, 5, 3, vth_list[0]); + rtl9300_sds_field_w(sds_num, 0x2e, 0x13, 2, 0, vth_list[1]); } else { rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, 13, 13, 0x0); mdelay(10); @@ -2329,72 +2309,72 @@ void rtl9300_sds_rxcal_tap_get(u32 sds_num, u32 tap_id, u32 tap_list[]) void rtl9300_do_rx_calibration_1(int sds, phy_interface_t phy_mode) { // From both rtl9300_rxCaliConf_serdes_myParam and rtl9300_rxCaliConf_phy_myParam - int tap0_init_val = 0x1f; // Initial Decision Fed Equalizer 0 tap - int vth_min = 0x0; + int tap0_init_val = 0x1f; // Initial Decision Fed Equalizer 0 tap + int vth_min = 0x0; pr_info("start_1.1.1 initial value for sds %d\n", sds); rtl930x_write_sds_phy(sds, 6, 0, 0); // FGCAL - rtl9300_sds_field_w(sds, 0x2e, 0x01, 14, 14, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x1c, 10, 5, 0x20); - rtl9300_sds_field_w(sds, 0x2f, 0x02, 0, 0, 0x1); + rtl9300_sds_field_w(sds, 0x2e, 0x01, 14, 14, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x1c, 10, 5, 0x20); + rtl9300_sds_field_w(sds, 0x2f, 0x02, 0, 0, 0x01); // DCVS - rtl9300_sds_field_w(sds, 0x2e, 0x1e, 14, 11, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x01, 15, 15, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x02, 11, 11, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x1c, 4, 0, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x1d, 15, 11, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x1d, 10, 6, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x1d, 5, 1, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x02, 10, 6, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x11, 4, 0, 0x0); - rtl9300_sds_field_w(sds, 0x2f, 0x00, 3, 0, 0xf); - rtl9300_sds_field_w(sds, 0x2e, 0x04, 6, 6, 0x1); - rtl9300_sds_field_w(sds, 0x2e, 0x04, 7, 7, 0x1); + rtl9300_sds_field_w(sds, 0x2e, 0x1e, 14, 11, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x01, 15, 15, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x02, 11, 11, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x1c, 4, 0, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x1d, 15, 11, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x1d, 10, 6, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x1d, 5, 1, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x02, 10, 6, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x11, 4, 0, 0x00); + rtl9300_sds_field_w(sds, 0x2f, 0x00, 3, 0, 0x0f); + rtl9300_sds_field_w(sds, 0x2e, 0x04, 6, 6, 0x01); + rtl9300_sds_field_w(sds, 0x2e, 0x04, 7, 7, 0x01); // LEQ (Long Term Equivalent signal level) - rtl9300_sds_field_w(sds, 0x2e, 0x16, 14, 8, 0x0); + rtl9300_sds_field_w(sds, 0x2e, 0x16, 14, 8, 0x00); // DFE (Decision Fed Equalizer) - rtl9300_sds_field_w(sds, 0x2f, 0x03, 5, 0, tap0_init_val); - rtl9300_sds_field_w(sds, 0x2e, 0x09, 11, 6, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x09, 5, 0, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x0a, 5, 0, 0x0); - rtl9300_sds_field_w(sds, 0x2f, 0x01, 5, 0, 0x0); - rtl9300_sds_field_w(sds, 0x2f, 0x12, 5, 0, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x0a, 11, 6, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x06, 5, 0, 0x0); - rtl9300_sds_field_w(sds, 0x2f, 0x01, 5, 0, 0x0); + rtl9300_sds_field_w(sds, 0x2f, 0x03, 5, 0, tap0_init_val); + rtl9300_sds_field_w(sds, 0x2e, 0x09, 11, 6, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x09, 5, 0, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x0a, 5, 0, 0x00); + rtl9300_sds_field_w(sds, 0x2f, 0x01, 5, 0, 0x00); + rtl9300_sds_field_w(sds, 0x2f, 0x12, 5, 0, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x0a, 11, 6, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x06, 5, 0, 0x00); + rtl9300_sds_field_w(sds, 0x2f, 0x01, 5, 0, 0x00); // Vth - rtl9300_sds_field_w(sds, 0x2e, 0x13, 5, 3, 0x7); - rtl9300_sds_field_w(sds, 0x2e, 0x13, 2, 0, 0x7); - rtl9300_sds_field_w(sds, 0x2f, 0x0b, 5, 3, vth_min); + rtl9300_sds_field_w(sds, 0x2e, 0x13, 5, 3, 0x07); + rtl9300_sds_field_w(sds, 0x2e, 0x13, 2, 0, 0x07); + rtl9300_sds_field_w(sds, 0x2f, 0x0b, 5, 3, vth_min); pr_info("end_1.1.1 --\n"); pr_info("start_1.1.2 Load DFE init. value\n"); - rtl9300_sds_field_w(sds, 0x2e, 0x0f, 13, 7, 0x7f); + rtl9300_sds_field_w(sds, 0x2e, 0x0f, 13, 7, 0x7f); pr_info("end_1.1.2\n"); pr_info("start_1.1.3 disable LEQ training,enable DFE clock\n"); - rtl9300_sds_field_w(sds, 0x2e, 0x17, 7, 7, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x17, 6, 2, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x0c, 8, 8, 0x0); - rtl9300_sds_field_w(sds, 0x2e, 0x0b, 4, 4, 0x1); - rtl9300_sds_field_w(sds, 0x2e, 0x12, 14, 14, 0x0); - rtl9300_sds_field_w(sds, 0x2f, 0x02, 15, 15, 0x0); + rtl9300_sds_field_w(sds, 0x2e, 0x17, 7, 7, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x17, 6, 2, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x0c, 8, 8, 0x00); + rtl9300_sds_field_w(sds, 0x2e, 0x0b, 4, 4, 0x01); + rtl9300_sds_field_w(sds, 0x2e, 0x12, 14, 14, 0x00); + rtl9300_sds_field_w(sds, 0x2f, 0x02, 15, 15, 0x00); pr_info("end_1.1.3 --\n"); pr_info("start_1.1.4 offset cali setting\n"); - rtl9300_sds_field_w(sds, 0x2e, 0x0f, 15, 14, 0x3); + rtl9300_sds_field_w(sds, 0x2e, 0x0f, 15, 14, 0x03); pr_info("end_1.1.4\n"); @@ -2403,18 +2383,18 @@ void rtl9300_do_rx_calibration_1(int sds, phy_interface_t phy_mode) // TODO: make this work for DAC cables of different lengths // For a 10GBit serdes wit Fibre, SDS 8 or 9 if (phy_mode == PHY_INTERFACE_MODE_10GBASER || PHY_INTERFACE_MODE_1000BASEX) - rtl9300_sds_field_w(sds, 0x2e, 0x16, 3, 2, 0x2); + rtl9300_sds_field_w(sds, 0x2e, 0x16, 3, 2, 0x02); else pr_err("%s not PHY-based or SerDes, implement DAC!\n", __func__); // No serdes, check for Aquantia PHYs - rtl9300_sds_field_w(sds, 0x2e, 0x16, 3, 2, 0x2); + rtl9300_sds_field_w(sds, 0x2e, 0x16, 3, 2, 0x02); - rtl9300_sds_field_w(sds, 0x2e, 0x0f, 6, 0, 0x5f); - rtl9300_sds_field_w(sds, 0x2f, 0x05, 7, 2, 0x1f); - rtl9300_sds_field_w(sds, 0x2e, 0x19, 9, 5, 0x1f); - rtl9300_sds_field_w(sds, 0x2f, 0x0b, 15, 9, 0x3c); - rtl9300_sds_field_w(sds, 0x2e, 0x0b, 1, 0, 0x3); + rtl9300_sds_field_w(sds, 0x2e, 0x0f, 6, 0, 0x5f); + rtl9300_sds_field_w(sds, 0x2f, 0x05, 7, 2, 0x1f); + rtl9300_sds_field_w(sds, 0x2e, 0x19, 9, 5, 0x1f); + rtl9300_sds_field_w(sds, 0x2f, 0x0b, 15, 9, 0x3c); + rtl9300_sds_field_w(sds, 0x2e, 0x0b, 1, 0, 0x03); pr_info("end_1.1.5\n"); } @@ -2424,10 +2404,10 @@ void rtl9300_do_rx_calibration_2_1(u32 sds_num) pr_info("start_1.2.1 ForegroundOffsetCal_Manual\n"); // Gray config endis to 1 - rtl9300_sds_field_w(sds_num, 0x2f, 0x02, 2, 2, 0x1); + rtl9300_sds_field_w(sds_num, 0x2f, 0x02, 2, 2, 0x01); // ForegroundOffsetCal_Manual(auto mode) - rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 14, 14, 0x0); + rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 14, 14, 0x00); pr_info("end_1.2.1"); } @@ -2467,7 +2447,7 @@ void rtl9300_do_rx_calibration_2_3(int sds_num) fgcal_binary = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 0); pr_info("%s: fgcal_gray: %d, fgcal_binary %d\n", - __func__, fgcal_gray, fgcal_binary); + __func__, fgcal_gray, fgcal_binary); offset_range = rtl9300_sds_field_r(sds_num, 0x2e, 0x15, 15, 14); @@ -2739,8 +2719,8 @@ int rtl9300_sds_check_calibration(int sds_num, phy_interface_t phy_mode) switch (phy_mode) { case PHY_INTERFACE_MODE_XGMII: - if ((errors2 - errors1 > 100) - || (errors1 >= 0xffff00) || (errors2 >= 0xffff00)) { + if ((errors2 - errors1 > 100) || + (errors1 >= 0xffff00) || (errors2 >= 0xffff00)) { pr_info("%s XSGMII error rate too high\n", __func__); return 1; } @@ -2754,6 +2734,7 @@ int rtl9300_sds_check_calibration(int sds_num, phy_interface_t phy_mode) default: return 1; } + return 0; } @@ -2813,11 +2794,11 @@ int rtl9300_serdes_setup(int sds_num, phy_interface_t phy_mode) // Maybe use dal_longan_sds_init - // dal_longan_construct_serdesConfig_init // Serdes Construct + // dal_longan_construct_serdesConfig_init // Serdes Construct rtl9300_phy_enable_10g_1g(sds_num); // Set Serdes Mode - rtl9300_sds_set(sds_num, 0x1a); // 0x1b: RTK_MII_10GR1000BX_AUTO + rtl9300_sds_set(sds_num, 0x1a); // 0x1b: RTK_MII_10GR1000BX_AUTO // Do RX calibration do { @@ -2838,7 +2819,7 @@ typedef struct { sds_config rtl9300_a_sds_10gr_lane0[] = { - /*1G*/ + /* 1G */ {0x00, 0x0E, 0x3053}, {0x01, 0x14, 0x0100}, {0x21, 0x03, 0x8206}, {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, {0x21, 0x0E, 0x0000}, @@ -2855,7 +2836,7 @@ sds_config rtl9300_a_sds_10gr_lane0[] = {0x2D, 0x18, 0x8E88}, {0x2D, 0x19, 0x4902}, {0x2D, 0x1D, 0x2641}, {0x2F, 0x13, 0x0050}, {0x2F, 0x18, 0x8E88}, {0x2F, 0x19, 0x4902}, {0x2F, 0x1D, 0x66E1}, - /*3.125G*/ + /* 3.125G */ {0x28, 0x00, 0x0668}, {0x28, 0x02, 0xD020}, {0x28, 0x06, 0xC000}, {0x28, 0x0B, 0x1892}, {0x28, 0x0F, 0xFFDF}, {0x28, 0x12, 0x01C4}, {0x28, 0x13, 0x027F}, {0x28, 0x14, 0x1311}, {0x28, 0x16, 0x00C9}, @@ -2864,7 +2845,7 @@ sds_config rtl9300_a_sds_10gr_lane0[] = {0x29, 0x05, 0x7F7C}, {0x29, 0x07, 0x8100}, {0x29, 0x08, 0x0001}, {0x29, 0x09, 0xFFD4}, {0x29, 0x0A, 0x7C2F}, {0x29, 0x0E, 0x003F}, {0x29, 0x0F, 0x0121}, {0x29, 0x10, 0x0020}, {0x29, 0x11, 0x8840}, - /*10G*/ + /* 10G */ {0x06, 0x0D, 0x0F00}, {0x06, 0x00, 0x0000}, {0x06, 0x01, 0xC800}, {0x21, 0x03, 0x8206}, {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, @@ -2886,7 +2867,7 @@ sds_config rtl9300_a_sds_10gr_lane0[] = sds_config rtl9300_a_sds_10gr_lane1[] = { - /*1G*/ + /* 1G */ {0x00, 0x0E, 0x3053}, {0x01, 0x14, 0x0100}, {0x21, 0x03, 0x8206}, {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, {0x21, 0x0A, 0x0003}, {0x21, 0x0B, 0x0005}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, @@ -2901,7 +2882,7 @@ sds_config rtl9300_a_sds_10gr_lane1[] = {0x25, 0x0F, 0x0121}, {0x25, 0x10, 0x0020}, {0x25, 0x11, 0x8840}, {0x2B, 0x13, 0x3D87}, {0x2B, 0x14, 0x3108}, {0x2D, 0x13, 0x3C87}, {0x2D, 0x14, 0x1808}, - /*3.125G*/ + /* 3.125G */ {0x28, 0x00, 0x0668}, {0x28, 0x02, 0xD020}, {0x28, 0x06, 0xC000}, {0x28, 0x0B, 0x1892}, {0x28, 0x0F, 0xFFDF}, {0x28, 0x12, 0x01C4}, {0x28, 0x13, 0x027F}, {0x28, 0x14, 0x1311}, {0x28, 0x16, 0x00C9}, @@ -2910,7 +2891,7 @@ sds_config rtl9300_a_sds_10gr_lane1[] = {0x29, 0x03, 0xFFDF}, {0x29, 0x05, 0x7F7C}, {0x29, 0x07, 0x8100}, {0x29, 0x08, 0x0001}, {0x29, 0x0A, 0x7C2F}, {0x29, 0x0E, 0x003F}, {0x29, 0x0F, 0x0121}, {0x29, 0x10, 0x0020}, {0x29, 0x11, 0x8840}, - /*10G*/ + /* 10G */ {0x06, 0x0D, 0x0F00}, {0x06, 0x00, 0x0000}, {0x06, 0x01, 0xC800}, {0x21, 0x03, 0x8206}, {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, {0x21, 0x0A, 0x0003}, {0x21, 0x0B, 0x0005}, @@ -2962,7 +2943,7 @@ int rtl9300_configure_serdes(struct phy_device *phydev) if (dev->of_node) { dn = dev->of_node; - + if (of_property_read_u32(dn, "sds", &sds_num)) sds_num = -1; pr_info("%s: Port %d, SerDes is %d\n", __func__, phy_addr, sds_num); @@ -3007,14 +2988,14 @@ int rtl9300_configure_serdes(struct phy_device *phydev) if (sds_num % 2) { for (i = 0; i < sizeof(rtl9300_a_sds_10gr_lane1) / sizeof(sds_config); ++i) { rtl930x_write_sds_phy(sds_num, rtl9300_a_sds_10gr_lane1[i].page, - rtl9300_a_sds_10gr_lane1[i].reg, - rtl9300_a_sds_10gr_lane1[i].data); + rtl9300_a_sds_10gr_lane1[i].reg, + rtl9300_a_sds_10gr_lane1[i].data); } } else { for (i = 0; i < sizeof(rtl9300_a_sds_10gr_lane0) / sizeof(sds_config); ++i) { rtl930x_write_sds_phy(sds_num, rtl9300_a_sds_10gr_lane0[i].page, - rtl9300_a_sds_10gr_lane0[i].reg, - rtl9300_a_sds_10gr_lane0[i].data); + rtl9300_a_sds_10gr_lane0[i].reg, + rtl9300_a_sds_10gr_lane0[i].data); } } @@ -3074,7 +3055,6 @@ void rtl9310_sds_field_w(int sds, u32 page, u32 reg, int end_bit, int start_bit, rtl931x_write_sds_phy(sds, page, reg, data); } - u32 rtl9310_sds_field_r(int sds, u32 page, u32 reg, int end_bit, int start_bit) { int l = end_bit - start_bit + 1; @@ -3092,7 +3072,7 @@ static void rtl931x_sds_rst(u32 sds) int shift = ((sds & 0x3) << 3); // TODO: We need to lock this! - + o = sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); v = o | BIT(sds); sw_w32(v, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); @@ -3121,15 +3101,15 @@ static void rtl931x_symerr_clear(u32 sds, phy_interface_t mode) xsg_sdsid_1 = xsg_sdsid_0 + 1; for (i = 0; i < 4; ++i) { - rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 24, 2, 0, i); - rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 3, 15, 8, 0x0); - rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 2, 15, 0, 0x0); + rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 24, 2, 0, i); + rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 3, 15, 8, 0x0); + rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 2, 15, 0, 0x0); } for (i = 0; i < 4; ++i) { - rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 24, 2, 0, i); - rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 3, 15, 8, 0x0); - rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 2, 15, 0, 0x0); + rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 24, 2, 0, i); + rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 3, 15, 8, 0x0); + rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 2, 15, 0, 0x0); } rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 0, 15, 0, 0x0); @@ -3150,6 +3130,7 @@ static u32 rtl931x_get_analog_sds(u32 sds) if (sds < 14) return sds_map[sds]; + return sds; } @@ -3225,6 +3206,7 @@ static int rtl931x_sds_cmu_page_get(phy_interface_t mode) default: return -1; } + return -1; } @@ -3300,7 +3282,7 @@ static void rtl931x_cmu_type_set(u32 asds, phy_interface_t mode, int chiptype) evenSds = asds - lane; pr_info("%s: cmu_type %0d cmu_page %x frc_cmu_spd %d lane %d asds %d\n", - __func__, cmu_type, cmu_page, frc_cmu_spd, lane, asds); + __func__, cmu_type, cmu_page, frc_cmu_spd, lane, asds); if (cmu_type == 1) { pr_info("%s A CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7)); @@ -3405,19 +3387,18 @@ static sds_config sds_config_10p3125g_cmu_type1[] = { void rtl931x_sds_init(u32 sds, phy_interface_t mode) { - - u32 board_sds_tx_type1[] = { 0x1C3, 0x1C3, 0x1C3, 0x1A3, 0x1A3, - 0x1A3, 0x143, 0x143, 0x143, 0x143, 0x163, 0x163 + u32 board_sds_tx_type1[] = { + 0x01c3, 0x01c3, 0x01c3, 0x01a3, 0x01a3, 0x01a3, + 0x0143, 0x0143, 0x0143, 0x0143, 0x0163, 0x0163, }; - - u32 board_sds_tx[] = { 0x1A00, 0x1A00, 0x200, 0x200, 0x200, - 0x200, 0x1A3, 0x1A3, 0x1A3, 0x1A3, 0x1E3, 0x1E3 + u32 board_sds_tx[] = { + 0x1a00, 0x1a00, 0x0200, 0x0200, 0x0200, 0x0200, + 0x01a3, 0x01a3, 0x01a3, 0x01a3, 0x01e3, 0x01e3 }; - - u32 board_sds_tx2[] = { 0xDC0, 0x1C0, 0x200, 0x180, 0x160, - 0x123, 0x123, 0x163, 0x1A3, 0x1A0, 0x1C3, 0x9C3 + u32 board_sds_tx2[] = { + 0x0dc0, 0x01c0, 0x0200, 0x0180, 0x0160, 0x0123, + 0x0123, 0x0163, 0x01a3, 0x01a0, 0x01c3, 0x09c3, }; - u32 asds, dSds, ori, model_info, val; int chiptype = 0; @@ -3456,7 +3437,7 @@ void rtl931x_sds_init(u32 sds, phy_interface_t mode) dSds = (sds - 1) * 2; pr_info("%s: 2.5gbit %08X dsds %d", __func__, - rtl931x_read_sds_phy(dSds, 0x1, 0x14), dSds); + rtl931x_read_sds_phy(dSds, 0x1, 0x14), dSds); pr_info("%s: RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR 0x%08X\n", __func__, sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR)); ori = sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); @@ -3500,7 +3481,7 @@ void rtl931x_sds_init(u32 sds, phy_interface_t mode) for (i = 0; i < sizeof(sds_config_10p3125g_cmu_type1) / sizeof(sds_config); ++i) { rtl931x_write_sds_phy(evenSds, - sds_config_10p3125g_cmu_type1[i].page - 0x4, sds_config_10p3125g_cmu_type1[i].reg, sds_config_10p3125g_cmu_type1[i].data); + sds_config_10p3125g_cmu_type1[i].page - 0x4, sds_config_10p3125g_cmu_type1[i].reg, sds_config_10p3125g_cmu_type1[i].data); } rtl9310_sds_field_w(asds, 0x6, 0x2, 12, 12, 0); @@ -3527,7 +3508,7 @@ void rtl931x_sds_init(u32 sds, phy_interface_t mode) break; case PHY_INTERFACE_MODE_10GBASER: // MII_10GR / MII_10GR1000BX_AUTO: - // configure 10GR fiber mode=1 + // configure 10GR fiber mode=1 rtl9310_sds_field_w(asds, 0x1f, 0xb, 1, 1, 1); // init fiber_1g @@ -3566,7 +3547,7 @@ void rtl931x_sds_init(u32 sds, phy_interface_t mode) case PHY_INTERFACE_MODE_QSGMII: default: pr_info("%s: PHY mode %s not supported by SerDes %d\n", - __func__, phy_modes(mode), sds); + __func__, phy_modes(mode), sds); return; } @@ -3594,9 +3575,11 @@ void rtl931x_sds_init(u32 sds, phy_interface_t mode) sw_w32(val, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); pr_debug("%s: RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR 0x%08X\n", __func__, sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR)); - if (mode == PHY_INTERFACE_MODE_XGMII || mode == PHY_INTERFACE_MODE_QSGMII - || mode == PHY_INTERFACE_MODE_HSGMII || mode == PHY_INTERFACE_MODE_SGMII - || mode == PHY_INTERFACE_MODE_USXGMII) { + if (mode == PHY_INTERFACE_MODE_XGMII || + mode == PHY_INTERFACE_MODE_QSGMII || + mode == PHY_INTERFACE_MODE_HSGMII || + mode == PHY_INTERFACE_MODE_SGMII || + mode == PHY_INTERFACE_MODE_USXGMII) { if (mode == PHY_INTERFACE_MODE_XGMII) rtl931x_sds_mii_mode_set(sds, mode); else @@ -3621,7 +3604,7 @@ int rtl931x_sds_cmu_band_set(int sds, bool enable, u32 band, phy_interface_t mod rtl9310_sds_field_w(asds, page, 0x7, 13, 13, 0); rtl9310_sds_field_w(asds, page, 0x7, 11, 11, 0); } - + rtl9310_sds_field_w(asds, page, 0x7, 4, 0, band); rtl931x_sds_rst(sds); @@ -3674,6 +3657,7 @@ int rtl931x_link_sts_get(u32 sds) pr_info("%s: serdes %d sts %d, sts1 %d, latch_sts %d, latch_sts1 %d\n", __func__, sds, sts, sts1, latch_sts, latch_sts1); + return sts1; } @@ -3741,6 +3725,7 @@ static int rtl8214c_phy_probe(struct phy_device *phydev) /* Configuration must be done whil patching still possible */ return rtl8380_configure_rtl8214c(phydev); } + return 0; } @@ -3807,6 +3792,7 @@ static int rtl8218d_phy_probe(struct phy_device *phydev) /* Configuration must be done while patching still possible */ // TODO: return configure_rtl8218d(phydev); } + return 0; } @@ -3825,6 +3811,7 @@ static int rtl838x_serdes_probe(struct phy_device *phydev) return rtl8380_configure_serdes(phydev); return 0; } + return -ENODEV; } diff --git a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h index 553d9a1575..4addfe1442 100644 --- a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h +++ b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h @@ -60,7 +60,7 @@ struct __attribute__ ((__packed__)) fw_header { #define RTL930X_SDS_INDACS_DATA (0x03B4) #define RTL930X_MAC_FORCE_MODE_CTRL (0xCA1C) -/*Registers of the internal SerDes of the 9310 */ +/* Registers of the internal SerDes of the 9310 */ #define RTL931X_SERDES_INDRT_ACCESS_CTRL (0x5638) #define RTL931X_SERDES_INDRT_DATA_CTRL (0x563C) #define RTL931X_SERDES_MODE_CTRL (0x13cc)