From: John Crispin Date: Fri, 1 Jun 2018 09:41:11 +0000 (+0200) Subject: Revert "ramips: remove conditional compilation." X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7577f32c8a064ad927d892d0a39225f38a846570;p=openwrt%2Fstaging%2Fyousong.git Revert "ramips: remove conditional compilation." This reverts commit 1f786257147f978ce4c5750fdc404851453fafcb. Signed-off-by: John Crispin --- diff --git a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c index 2d4cc65ccf..80f9cc2080 100644 --- a/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c +++ b/target/linux/ramips/files-4.14/arch/mips/pci/pci-mt7621.c @@ -65,6 +65,9 @@ extern void chk_phy_pll(void); * devices. */ +#define CONFIG_PCIE_PORT0 +#define CONFIG_PCIE_PORT1 +#define CONFIG_PCIE_PORT2 #define RALINK_PCIE0_CLK_EN (1<<24) #define RALINK_PCIE1_CLK_EN (1<<25) #define RALINK_PCIE2_CLK_EN (1<<26) @@ -141,7 +144,7 @@ extern void chk_phy_pll(void); #define RALINK_PCI_IO_MAP_BASE 0x1e160000 #define RALINK_SYSTEM_CONTROL_BASE 0xbe000000 - +#define GPIO_PERST #define ASSERT_SYSRST_PCIE(val) do { \ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \ RALINK_RSTCTRL |= val; \ @@ -394,15 +397,21 @@ set_pcie_phy(u32 *addr, int start_b, int bits, int val) void bypass_pipe_rst(void) { +#if defined (CONFIG_PCIE_PORT0) /* PCIe Port 0 */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] +#endif +#if defined (CONFIG_PCIE_PORT1) /* PCIe Port 1 */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] +#endif +#if defined (CONFIG_PCIE_PORT2) /* PCIe Port 2 */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] +#endif } void @@ -411,6 +420,7 @@ set_phy_for_ssc(void) unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10)); reg = (reg >> 6) & 0x7; +#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1) /* Set PCIe Port0 & Port1 PHY to disable SSC */ /* Debug Xtal Type */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type @@ -451,7 +461,8 @@ set_phy_for_ssc(void) set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control - +#endif +#if defined (CONFIG_PCIE_PORT2) /* Set PCIe Port2 PHY to disable SSC */ /* Debug Xtal Type */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type @@ -484,6 +495,7 @@ set_phy_for_ssc(void) /* Enable PHY and disable force mode */ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control +#endif } void setup_cm_memory_region(struct resource *mem_resource) @@ -516,13 +528,18 @@ static int mt7621_pci_probe(struct platform_device *pdev) ioport_resource.start= 0; ioport_resource.end = ~0; +#if defined (CONFIG_PCIE_PORT0) val = RALINK_PCIE0_RST; +#endif +#if defined (CONFIG_PCIE_PORT1) val |= RALINK_PCIE1_RST; +#endif +#if defined (CONFIG_PCIE_PORT2) val |= RALINK_PCIE2_RST; - +#endif ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST); printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); - +#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/ *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3); *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3; mdelay(100); @@ -531,11 +548,18 @@ static int mt7621_pci_probe(struct platform_device *pdev) *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7); // clear DATA mdelay(100); - +#else + *(unsigned int *)(0xbe000060) &= ~0x00000c00; +#endif +#if defined (CONFIG_PCIE_PORT0) val = RALINK_PCIE0_RST; +#endif +#if defined (CONFIG_PCIE_PORT1) val |= RALINK_PCIE1_RST; +#endif +#if defined (CONFIG_PCIE_PORT2) val |= RALINK_PCIE2_RST; - +#endif DEASSERT_SYSRST_PCIE(val); printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); @@ -544,12 +568,18 @@ static int mt7621_pci_probe(struct platform_device *pdev) set_phy_for_ssc(); printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); +#if defined (CONFIG_PCIE_PORT0) read_config(0, 0, 0, 0x70c, &val); printk("Port 0 N_FTS = %x\n", (unsigned int)val); +#endif +#if defined (CONFIG_PCIE_PORT1) read_config(0, 1, 0, 0x70c, &val); printk("Port 1 N_FTS = %x\n", (unsigned int)val); +#endif +#if defined (CONFIG_PCIE_PORT2) read_config(0, 2, 0, 0x70c, &val); printk("Port 2 N_FTS = %x\n", (unsigned int)val); +#endif RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST); RALINK_SYSCFG1 &= ~(0x30); @@ -560,11 +590,19 @@ static int mt7621_pci_probe(struct platform_device *pdev) RALINK_PCIE_CLK_GEN |= 0x80000000; mdelay(50); RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST); + - /* Use GPIO control instead of PERST_N */ +#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/ *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // set DATA - mdelay(1000); + mdelay(100); +#else + RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST +#endif + mdelay(500); + + mdelay(500); +#if defined (CONFIG_PCIE_PORT0) if(( RALINK_PCI0_STATUS & 0x1) == 0) { printk("PCIE0 no card, disable it(RST&CLK)\n"); @@ -575,6 +613,8 @@ static int mt7621_pci_probe(struct platform_device *pdev) pcie_link_status |= 1<<0; RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt } +#endif +#if defined (CONFIG_PCIE_PORT1) if(( RALINK_PCI1_STATUS & 0x1) == 0) { printk("PCIE1 no card, disable it(RST&CLK)\n"); @@ -585,6 +625,8 @@ static int mt7621_pci_probe(struct platform_device *pdev) pcie_link_status |= 1<<1; RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt } +#endif +#if defined (CONFIG_PCIE_PORT2) if (( RALINK_PCI2_STATUS & 0x1) == 0) { printk("PCIE2 no card, disable it(RST&CLK)\n"); ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST); @@ -594,6 +636,7 @@ static int mt7621_pci_probe(struct platform_device *pdev) pcie_link_status |= 1<<2; RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt } +#endif if (pcie_link_status == 0) return 0; @@ -644,6 +687,7 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE; RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE; +#if defined (CONFIG_PCIE_PORT0) //PCIe0 if((pcie_link_status & 0x1) != 0) { RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE @@ -651,6 +695,8 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num RALINK_PCI0_CLASS = 0x06040001; printk("PCIE0 enabled\n"); } +#endif +#if defined (CONFIG_PCIE_PORT1) //PCIe1 if ((pcie_link_status & 0x2) != 0) { RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE @@ -658,6 +704,8 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num RALINK_PCI1_CLASS = 0x06040001; printk("PCIE1 enabled\n"); } +#endif +#if defined (CONFIG_PCIE_PORT2) //PCIe2 if ((pcie_link_status & 0x4) != 0) { RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE @@ -665,6 +713,8 @@ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num RALINK_PCI2_CLASS = 0x06040001; printk("PCIE2 enabled\n"); } +#endif + switch(pcie_link_status) { case 7: