From: Nick Kossifidis Date: Sun, 5 Aug 2012 19:35:34 +0000 (+0300) Subject: ath5k: Fix range scaling when setting rate power table X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=755051993bfcdf07acd84a7ffd08d463b85bfd69;p=openwrt%2Fstaging%2Fblogic.git ath5k: Fix range scaling when setting rate power table rates[i] is unsigned but txp_offset can be negative for newer parts with PDADC table. We cover the case when rates[i] + txp_offset > 63 but we must also cover the case when its < 0 or else rates[i] will overflow. Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index aa1a77d4cd90..84a9aafd91a2 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -3516,6 +3516,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, { unsigned int i; u16 *rates; + s16 rate_idx_scaled = 0; /* max_pwr is power level we got from driver/user in 0.5dB * units, switch to 0.25dB units so we can compare */ @@ -3580,10 +3581,13 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, * match the power range set by user with the power indices * on PCDAC/PDADC table */ for (i = 0; i < 16; i++) { - rates[i] += ah->ah_txpower.txp_offset; + rate_idx_scaled = rates[i] + ah->ah_txpower.txp_offset; /* Don't get out of bounds */ - if (rates[i] > 63) - rates[i] = 63; + if (rate_idx_scaled > 63) + rate_idx_scaled = 63; + if (rate_idx_scaled < 0) + rate_idx_scaled = 0; + rates[i] = rate_idx_scaled; } }