From: Alexander Aring Date: Tue, 16 Jun 2015 09:07:43 +0000 (+0200) Subject: at86rf230: add recommended csma backoffs settings X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=74ed9d98456a7a85c9e041cd17350b8583659adf;p=openwrt%2Fstaging%2Fblogic.git at86rf230: add recommended csma backoffs settings This patch adds support for a new random csma backoffs settings when going into sleep state. This is recommended according at86rf2xx datasheets. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index b839bbd4ff69..7e30a45718c9 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -945,10 +945,21 @@ static void at86rf230_stop(struct ieee802154_hw *hw) { struct at86rf230_local *lp = hw->priv; + u8 csma_seed[2]; at86rf230_sync_state_change(hw->priv, STATE_FORCE_TRX_OFF); disable_irq(lp->spi->irq); + + /* It's recommended to set random new csma_seeds before sleep state. + * Makes only sense in the stop callback, not doing this inside of + * at86rf230_sleep, this is also used when we don't transmit afterwards + * when calling start callback again. + */ + get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed)); + at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]); + at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]); + at86rf230_sleep(lp); }