From: Markus Pargmann Date: Wed, 12 Aug 2015 14:50:05 +0000 (+0200) Subject: iio: bmg160: Remove i2c_client from data struct X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=74e04345dc7e111fd151923d2de32267f1aae321;p=openwrt%2Fstaging%2Fblogic.git iio: bmg160: Remove i2c_client from data struct i2c_client variable is not really used anymore in the core driver. It is only used to get the device to make proper outputs. This patch replaces all i2c_client usage through direct usage of the device pointer. Signed-off-by: Markus Pargmann Reviewed-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c index d3c5300a3862..e73f7f27692a 100644 --- a/drivers/iio/gyro/bmg160.c +++ b/drivers/iio/gyro/bmg160.c @@ -98,7 +98,7 @@ #define BMG160_AUTO_SUSPEND_DELAY_MS 2000 struct bmg160_data { - struct i2c_client *client; + struct device *dev; struct regmap *regmap; struct iio_trigger *dready_trig; struct iio_trigger *motion_trig; @@ -148,7 +148,7 @@ static int bmg160_set_mode(struct bmg160_data *data, u8 mode) ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode); if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_pmu_lpw\n"); + dev_err(data->dev, "Error writing reg_pmu_lpw\n"); return ret; } @@ -178,7 +178,7 @@ static int bmg160_set_bw(struct bmg160_data *data, int val) ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits); if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_pmu_bw\n"); + dev_err(data->dev, "Error writing reg_pmu_bw\n"); return ret; } @@ -194,13 +194,13 @@ static int bmg160_chip_init(struct bmg160_data *data) ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val); if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_chip_id\n"); + dev_err(data->dev, "Error reading reg_chip_id\n"); return ret; } - dev_dbg(&data->client->dev, "Chip Id %x\n", val); + dev_dbg(data->dev, "Chip Id %x\n", val); if (val != BMG160_CHIP_ID_VAL) { - dev_err(&data->client->dev, "invalid chip %x\n", val); + dev_err(data->dev, "invalid chip %x\n", val); return -ENODEV; } @@ -219,14 +219,14 @@ static int bmg160_chip_init(struct bmg160_data *data) /* Set Default Range */ ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS); if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_range\n"); + dev_err(data->dev, "Error writing reg_range\n"); return ret; } data->dps_range = BMG160_RANGE_500DPS; ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val); if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_slope_thres\n"); + dev_err(data->dev, "Error reading reg_slope_thres\n"); return ret; } data->slope_thres = val; @@ -235,7 +235,7 @@ static int bmg160_chip_init(struct bmg160_data *data) ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1, BMG160_INT1_BIT_OD, 0); if (ret < 0) { - dev_err(&data->client->dev, "Error updating bits in reg_int_en_1\n"); + dev_err(data->dev, "Error updating bits in reg_int_en_1\n"); return ret; } @@ -243,7 +243,7 @@ static int bmg160_chip_init(struct bmg160_data *data) BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Error writing reg_motion_intr\n"); return ret; } @@ -257,17 +257,17 @@ static int bmg160_set_power_state(struct bmg160_data *data, bool on) int ret; if (on) - ret = pm_runtime_get_sync(&data->client->dev); + ret = pm_runtime_get_sync(data->dev); else { - pm_runtime_mark_last_busy(&data->client->dev); - ret = pm_runtime_put_autosuspend(&data->client->dev); + pm_runtime_mark_last_busy(data->dev); + ret = pm_runtime_put_autosuspend(data->dev); } if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Failed: bmg160_set_power_state for %d\n", on); if (on) - pm_runtime_put_noidle(&data->client->dev); + pm_runtime_put_noidle(data->dev); return ret; } @@ -286,7 +286,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, BMG160_INT_MAP_0_BIT_ANY, (status ? BMG160_INT_MAP_0_BIT_ANY : 0)); if (ret < 0) { - dev_err(&data->client->dev, "Error updating bits reg_int_map0\n"); + dev_err(data->dev, "Error updating bits reg_int_map0\n"); return ret; } @@ -296,7 +296,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES, data->slope_thres); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Error writing reg_slope_thres\n"); return ret; } @@ -305,7 +305,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y | BMG160_INT_MOTION_Z); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Error writing reg_motion_intr\n"); return ret; } @@ -321,7 +321,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Error writing reg_rst_latch\n"); return ret; } @@ -335,7 +335,7 @@ static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data, } if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_en0\n"); + dev_err(data->dev, "Error writing reg_int_en0\n"); return ret; } @@ -352,7 +352,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, BMG160_INT_MAP_1_BIT_NEW_DATA, (status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0)); if (ret < 0) { - dev_err(&data->client->dev, "Error updating bits in reg_int_map1\n"); + dev_err(data->dev, "Error updating bits in reg_int_map1\n"); return ret; } @@ -361,7 +361,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, BMG160_INT_MODE_NON_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Error writing reg_rst_latch\n"); return ret; } @@ -375,7 +375,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Error writing reg_rst_latch\n"); return ret; } @@ -384,7 +384,7 @@ static int bmg160_setup_new_data_interrupt(struct bmg160_data *data, } if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_int_en0\n"); + dev_err(data->dev, "Error writing reg_int_en0\n"); return ret; } @@ -414,7 +414,7 @@ static int bmg160_set_scale(struct bmg160_data *data, int val) ret = regmap_write(data->regmap, BMG160_REG_RANGE, bmg160_scale_table[i].dps_range); if (ret < 0) { - dev_err(&data->client->dev, + dev_err(data->dev, "Error writing reg_range\n"); return ret; } @@ -440,7 +440,7 @@ static int bmg160_get_temp(struct bmg160_data *data, int *val) ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val); if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_temp\n"); + dev_err(data->dev, "Error reading reg_temp\n"); bmg160_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; @@ -470,7 +470,7 @@ static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val) ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val, 2); if (ret < 0) { - dev_err(&data->client->dev, "Error reading axis %d\n", axis); + dev_err(data->dev, "Error reading axis %d\n", axis); bmg160_set_power_state(data, false); mutex_unlock(&data->mutex); return ret; @@ -813,7 +813,7 @@ static int bmg160_trig_try_reen(struct iio_trigger *trig) BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) { - dev_err(&data->client->dev, "Error writing reg_rst_latch\n"); + dev_err(data->dev, "Error writing reg_rst_latch\n"); return ret; } @@ -879,7 +879,7 @@ static irqreturn_t bmg160_event_handler(int irq, void *private) ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val); if (ret < 0) { - dev_err(&data->client->dev, "Error reading reg_int_status2\n"); + dev_err(data->dev, "Error reading reg_int_status2\n"); goto ack_intr_status; } @@ -916,7 +916,7 @@ ack_intr_status: BMG160_INT_MODE_LATCH_INT | BMG160_INT_MODE_LATCH_RESET); if (ret < 0) - dev_err(&data->client->dev, + dev_err(data->dev, "Error writing reg_rst_latch\n"); } @@ -1021,7 +1021,7 @@ static int bmg160_probe(struct i2c_client *client, data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); - data->client = client; + data->dev = &client->dev; ret = bmg160_chip_init(data); if (ret < 0) @@ -1188,7 +1188,7 @@ static int bmg160_runtime_suspend(struct device *dev) ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND); if (ret < 0) { - dev_err(&data->client->dev, "set mode failed\n"); + dev_err(data->dev, "set mode failed\n"); return -EAGAIN; }